This adds the DP and the DPDMA to the Zynq MP platform.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-10-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a virtual PMU device for virt machine while use PPI 7 for PMU
overflow interrupt number.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The way we currently model the RPU subsystem is of quite
limited use. In addition to that, it causes problems for
KVM and for GDB debugging.
Make the RPU optional by adding a has_rpu property and
default to having it disabled.
This changes the default setup from having the RPU to not
longer having it.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a secure prop to en/disable ARM Security Extensions.
This is particularly useful for KVM runs.
Default to disabled to match the behavior of KVM.
This changes the default setup from having the ARM Security
Extensions to not longer having them.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers
directly connected to the APB bus. They can be programmed as master or
slave but the propopsed model only supports the master mode.
On the TODO list, we also have :
- improve and harden the state machine.
- bus recovery support (used by the Linux driver).
- transfer mode state machine bits. this is not strictly necessary as
it is mostly used for debug. The bus busy bit is deducted from the
I2C core engine of qemu.
- support of the pool buffer: 2048 bytes of internal SRAM (not used
by the Linux driver).
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org
[PMM: removed unused functions aspeed_i2c_bus_get_state() and
aspeed_i2c_bus_set_state()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the ENET device to the i.MX6 SOC.
This was tested by booting Linux on an Qemu i.MX6 instance and accessing
the internet from the linux guest.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This will keep things working when cpu.h will not be included
indirectly almost everywhere (either directly or through
qemu-common.h).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At present, all DMA transfers complete inline (so a looping descriptor
queue will lock up the device). We also do not model pause/abort,
arbitrarion/priority, or debug features.
Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1457467526-8840-6-git-send-email-Andrew.Baumann@microsoft.com
[AB: implement 2D mode, cleanup/refactoring for upstream submission]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The framebuffer occupies the upper portion of memory (64MiB by
default), but it can only be controlled/configured via a system
mailbox or property channel (to be added by a subsequent patch).
Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1457467526-8840-4-git-send-email-Andrew.Baumann@microsoft.com
[AB: added Windows (BGR) support and cleanup/refactoring for upstream submission]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present only the core UART functions (data path for tx/rx) are
implemented, which is enough for UEFI to boot. The following
features/registers are unimplemented:
* Line/modem control
* Scratch register
* Extra control
* Baudrate
* SPI interfaces
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1457467526-8840-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the ASPEED AST2400 SoC[1] has a broad range of capabilities this
implementation is minimal, comprising an ARM926 processor, ASPEED VIC
and timer devices, and a 8250 UART.
[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support ARM big-endian ELF files in system-mode emulation. When loading
an elf, determine the endianness mode expected by the elf, and set the
relevant CPU state accordingly.
With this, big-endian modes are now fully supported via system-mode LE,
so there is no need to restrict the elf loading to the TARGET
endianness so the ifdeffery on TARGET_WORDS_BIGENDIAN goes away.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fix typo in comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we're booting in Secure mode, provide a secure-only RAM
(just 16MB) so that secure firmware has somewhere to run
from that won't be accessible to the Non-secure guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-2-git-send-email-peter.maydell@linaro.org
The new version is slightly different, to support Rasbperry Pi (in
particular, Pi1's arm11 core which doesn't support v7 instructions
such as MOVW).
Tested-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the SoC for Raspberry Pi 2.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This device maintains all the non-CPU peripherals on bcm2835 (Pi1)
which are also present on bcm2836 (Pi2). It also implements the
private address spaces used for DMA and mailboxes.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
in current impl. condition
build_madt() {
...
if (test_bit(i, cpuinfo->found_cpus))
is always true since loop handles only present CPUs
in range [0..smp_cpus).
But to fill usless cpuinfo->found_cpus we do unnecessary
scan over QOM tree to find the same CPUs.
So mark GICC as present always and drop not needed
code that fills cpuinfo->found_cpus.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1454323689-248759-1-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a secure memory region to the virt board, which is the
same as the nonsecure memory region except that it also has
a secure-only UART in it. This is only created if the
board is started with the '-machine secure=on' property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Connect the Xilinx SPI devices to the ZynqMP model.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[ PC changes
* Use QOM alias for bus connectivity on SoC level
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[PMM: free the g_strdup_printf() string when finished with it]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx ZynqMP SoC and EP108 board supports three memory regions:
- A 2GB region starting at 0
- A 32GB region starting at 32GB
- A 256GB region starting at 768GB
This patch adds support for the first two memory regions, which is
automatically created based on the size specified by the QEMU memory
command line argument.
On hardware the physical memory region is one continuous region, it is then
mapped into the three different regions by the DDRC. As we don't model the
DDRC this is done at startup by QEMU. The board creates the memory region and
then passes that memory region to the SoC. The SoC then maps the memory
regions.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: a1e47db941d65733724a300fcd98b74fbeeaaf22.1452637205.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this CCM, i.MX25 timer is accurate with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.
IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.
For now the i.MX25 continues to use the i.MX31 CCM implementation.
An i.MX25 specific CCM will be introduced in a later patch.
We also rework initialization to stop using deprecated sysbus device init.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for
powerdown, hotplug evnets. Add a GPIO controller in machine virt,
to support powerdown, maybe can be used for cpu hotplug. And
here we use pl061.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a flag that when set, will cause the primary CPU to start in secure
mode, even if the overall boot is non-secure. This is useful for when
there is a board-setup blob that needs to run from secure mode, but
device and secondary CPU init should still be done as-normal for a non-
secure boot.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: d1170774d5446d715fced7739edfc61a5be931f9.1447007690.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an API for boards to inject their own preboot software (or
firmware) sequence.
The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).
The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).
Rewrite the comment for the primary boot blob.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add two SYSBUS_SDHCI devices for xlnx-zynqmp
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.
max_cpus for virt machine increased to 123 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().
ITS region is added to the memory map too, however currently it not used,
just reserved.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Tested-by: Ashok kumar <ashoks@broadcom.com>
[PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the Sysbus AHCI device to ZynqMP.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
[PMM: removed unnecessary brackets in error_propagate call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For ARM we have a little minimalist bootloader in hw/arm/boot.c which
takes the place of firmware if we're directly booting a Linux kernel.
Unfortunately a few devices need special case handling in this situation
to do the initialization which on real hardware would be done by
firmware. (In particular if we're booting a kernel in NonSecure state
then we need to make a TZ-aware GIC put all its interrupts into Group 1,
or the guest will be unable to use them.)
Create a new QOM interface which can be implemented by devices which
need to do something different from their default reset behaviour.
The callback will be called after machine initialization and before
first reset.
Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-3-git-send-email-peter.maydell@linaro.org
This is using a ds1338 RTC chip on the I2C bus. This RTC chip is
not present on the real 3DS PDK board.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 05601683a2a95c881cbc9f22651a044d969bd0ae.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM926
* Interrupt Controller: AVIC
* CCM
* UART x 5
* EPIT x 2
* GPT x 4
* FEC
* I2C x 3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.
While touching the memory map comment de-indent to the correct level
of indentation.
This obsoletes the legacy i.MX device device creation helpers which are removed.
Tested by booting a minimal Linux system on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM1136
* Interrupt Controller: AVIC
* CCM
* UART x 2
* EPIT x 2
* GPT
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This large region is necessary for some devices like ivshmem and video cards
32-bit kernels can be built without LPAE support. In this case such a kernel
will not be able to use PCI controller which has windows in high addresses.
In order to work around the problem, "highmem" option is introduced. It
defaults to on on, but can be manually set to off in order to be able to run
those old 32-bit guests.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
[PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx EP108 has four separate OCM banks which are located
adjacent to each other. This patch adds the four banks to
the ZynqMP SoC.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Including qemu-common.h from other header files is generally a bad
idea, because it means it's very easy to end up with a circular
dependency. For instance, if we wanted to include memory.h from
qom/cpu.h we'd end up with this loop:
memory.h -> qemu-common.h -> cpu.h -> cpu-qom.h -> qom/cpu.h -> memory.h
Remove the include from memory.h. This requires us to fix up a few
other files which were inadvertently getting declarations indirectly
through memory.h.
The biggest change is splitting the fprintf_function typedef out
into its own header so other headers can get at it without having
to include qemu-common.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1435933104-15216-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the 2xCortexR5 CPUs to zynqmp board. They are powered off on reset
(this is true of real hardware) by default or selectable as the boot
processor.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: da34128c73ca13fc4f8c3293e1a33d1e1e345655.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a string property that specifies the primary boot cpu. All CPUs
except the one selected will start-powered-off. This allows for elf
boots on any CPU, which prepares support for booting R5 elfs directly
on the R5 processors.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 53331c00d80c7ce9c6a83712348773f1b38fae2b.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUs currently supported by zynqmp are the APU (application
processing unit) CPUs. There are other CPUs in Zynqmp so unqualified
"cpus" in ambiguous. Preface the variables with "APU" accordingly, to
prepare support adding the RPU (realtime processing unit) processors.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: ce32287fc365aea898465e981da3546a227e0811.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allows the instantiation of the vfio-calxeda-xgmac device
from the QEMU command line (-device vfio-calxeda-xgmac,host="<device>").
A specialized device tree node is created for the guest, containing
compat, dma-coherent, reg and interrupts properties.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434455898-17895-1-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
