Commit Graph

142 Commits

Author SHA1 Message Date
Jan Kiszka
e9283f8b88 monitor: Drop pci_addr prefix from hotplug commands
The "pci_addr=" prefix currently required by pci_add/remove and
drive_add has no practical use. Drop it, but still silently accept it
for backward compatibility.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 14:18:07 -05:00
Michael S. Tsirkin
64d50b8b0a qemu/pci: add pci_get/set_byte
Add pci_get/set_byte to keep *_word and *_long access functions company.
They are unused for now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:15 -05:00
Michael S. Tsirkin
02eb84d0ec qemu/pci: MSI-X support functions
Add functions implementing MSI-X support. First user will be virtio-pci.
Note that platform must set a flag to declare MSI supported: this
is a safety measure to avoid breaking platforms which should support
MSI-X but currently lack this in the interrupt controller emulation.
For PC this will be set by APIC.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:14 -05:00
Michael S. Tsirkin
bd4b65ee5e qemu/pci: check constant registers on load
Add "cmask" table of constant register masks: if a bit is not writeable
and is set in cmask table, this bit is checked on load.  An attempt to
load an image that would change such a register causes load to fail.
Use this table to make sure that load does not modify registers that
guest can not change (directly or indirectly).

Note: we can't just assume that read-only registers never change,
because the guest could change a register indirectly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:14 -05:00
Michael S. Tsirkin
6f4cbd3950 qemu/pci: add routines to manage PCI capabilities
Add routines to manage PCI capability list. First user will be MSI-X.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:14 -05:00
Michael S. Tsirkin
14e1255991 qemu/pci: helper routines for pci access
Add inline routines for convenient access to pci devices
with correct (little) endianness. Will be used by MSI-X support.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:14 -05:00
Michael S. Tsirkin
b7ee1603c1 qemu/pci: make default_write_config use mask table
Change much of hw/pci to use symbolic constants and a table-driven
design: add a mask table with writable bits set and readonly bits unset.
Detect change by comparing original and new registers.

This makes it easy to support capabilities where read-only/writeable
bit layout differs between devices, depending on capabilities present.

As a result, writing a single byte in BAR registers now works as
it should. Writing to upper limit registers in the bridge
also works as it should. Code is also shorter.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24 09:09:14 -05:00
Markus Armbruster
1f5f6638c0 Make first argument of monitor command pci_add work
Simply pass the PCI address through qemu_pci_hot_add_nic() to
pci_nic_init() and through qemu_pci_hot_add_storage() to pci_create().

Before, pci_device_hot_add() passed along the PCI bus to use, and
ignored any user-specified slot.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:29 -05:00
Markus Armbruster
5607c38820 Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into struct
NICinfo.  Use it in pci_nic_init(), and remove arguments bus and
devfn.

Don't support addr= in third argument of monitor command pci_add,
because that clashes with its first argument.  Admittedly unelegant.

Machines "malta" and "r2d" have a default NIC with a well-known PCI
address.  Deal with that the same way as the NIC model: make
pci_nic_init() take an optional default to be used when the user
doesn't specify one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:29 -05:00
Avi Kivity
28c2c26495 Rename pci_register_io_region() to pci_register_bar()
This function is used to manage a PCI BAR, so make the more generic
pci_register_io_region() available to other uses.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:38 -05:00
Blue Swirl
8238467045 Remove unused and misnamed field and variable
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-09 17:25:00 +00:00
Paul Brook
02e2da45c4 Add common BusState
Implement and use a common device bus state.  The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations.  For legacy code we allow a NULL parent, but that
should go away eventually.

Also tweak creation code to veriry theat a device in on the right bus.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-23 00:13:41 +01:00
Paul Brook
9d07d7579b PCI network qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook
9be5dafe48 LSI SCSI qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook
6b1b92d35b PCI qdev support
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Paul Brook
fbe1b5953d Remove vga_ram_size
The vga_ram_size argument to machine init functions always has the same
value, and is ignored by many machines (including SPARC32 which has an
obsolete ifdef for VGA_RAM_SIZE).

Remove it and push VGA_RAM_SIZE into vga_int.h.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13 17:56:25 +01:00
Isaku Yamahata
6407f37373 use PCI_HEADER_TYPE.
use symbolic value instead of 0x0e and related value.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-05-03 19:03:00 +00:00
pbrook
b584726df9 Clean up VGA ram allocation.
Signed-off-by: Paul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10 02:24:36 +00:00
aliguori
cef3017cd7 Clean some PCI defines (Stefan Weil)
this patch adds some more defines from linux/pci_regs.h to
hw/pci.h. There is now no longer a need to define them in
eepro100.c, so they were removed there.

Some defines from linux/pci_regs.h had similar, but not
the same defines in hw/pci.h (PCI_REVISION_ID / PCI_REVISION,
PCI_SUBSYSTEM_VENDOR_ID / PCI_SUBVENDOR_ID,
PCI_SUBSYSTEM_ID / PCI_SUBDEVICE_ID).

I suggest to use the "standard" from linux/pci_regs.h and
replace the "old" Qemu ones. To facilitate the migration,
my patch does not remove the old defines but marks them
as obsolete. After a migration to the "standard" defines,
pci.h could use linux/pci_regs.h which is far more complete.

The patch is needed for an updated maintainer version of
hw/eepro100.c which I'd like to see in Qemu stable.

 * Remove declarations already declared in header file from eepro100.c
 * Add missing declarations from pci_regs.h to pci.h
 * Mark "non-standard" declarations in pci.h as obsolete

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6901 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28 17:29:07 +00:00
aliguori
a770dc7ea6 Add and use remaining #defines for PCI device IDs (Stuart Brady)
This patch adds and uses #defines for the remaining hardcoded PCI
device IDs.  It also moves definitions taken from linux/pci_ids.h
into a separate header (hw/pci_ids.h), removes the 'RTL' from
PCI_DEVICE_ID_REALTEK_RTL8029, and renames PCI_DEVICE_ID_FSL_E500
to PCI_DEVICE_ID_MPC8533E to match Linux's definition.

Changes in v2:
 * Don't use C99-style comments
 * Move definitions from linux/pci_ids.h into a separate header
 * Rename PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E

Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6841 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 15:02:23 +00:00
aliguori
376253ece4 monitor: Rework API (Jan Kiszka)
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.

For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.

Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.

At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 23:01:23 +00:00
aurel32
74c62ba889 kvm/powerpc: Add freescale pci controller's support
This patch add the emulation of freescale's pci controller for MPC85xx platform.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6661 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-02 16:42:23 +00:00
aliguori
6f338c3469 qemu: PCI device, disk and host network hot-add / hot-remove (Marcelo Tosatti)
Add monitor command to hot-add PCI devices (nic and storage).
    
Syntax is:
    
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
    
It returns the domain, bus and slot for the newly added device on success.
    
It is possible to attach a disk to a device after PCI initialization via
the drive_add command. If so, a manual scan of the SCSI bus on the guest
is necessary.
    
Save QEMUMachine necessary for drive_init.
    
Add monitor command to hot-remove devices, remove device data on _EJ0 notification.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11 15:21:54 +00:00
aliguori
880345c484 Parse full PCI device addresses (Markus Armbruster)
This code parses full PCI device addresses.  It then rejects domains
other than zero, because these are not supported in QEMU.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6609 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11 15:21:48 +00:00
aliguori
5851e08cb8 qemu: add pci_unregister_device (Marcelo Tosatti)
Unregister the pci device, unassign its IO and memory regions, and free
associated data.

Add a callback so drivers can free device state.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6603 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11 15:21:10 +00:00
aliguori
72da420859 qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)
Change the PCI network drivers init functions to return the PCIDev, to
inform which slot has been hot-plugged.

Also record PCIDevice structure on NICInfo to locate for release on
hot-removal.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11 15:19:52 +00:00
aliguori
3ae8061898 qemu: add pci helper functions (Marcelo Tosatti)
Add pci_find_bus/pci_find_device to be used by PCI hotplug.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11 15:19:46 +00:00
blueswir1
173a543b36 Add and use #defines for PCI device classes
This patch adds and uses #defines for PCI device classes and subclases,
using a new pci_config_set_class() function, similar to the recently
added pci_config_set_vendor_id() and pci_config_set_device_id().

Change since v1: fixed compilation of hw/sun4u.c

Signed-off-by: Stuart Brady <stuart.brady@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01 19:26:20 +00:00
blueswir1
4ebcf88483 Update #defines for PCI vendor and device IDs from OpenBIOS and Linux
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6490 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01 12:01:04 +00:00
blueswir1
480b9f24d7 Add Simba device ID
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6465 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-27 19:15:31 +00:00
aliguori
deb54399df Define PCI vendor and device IDs in pci.h (Stuart Brady)
This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.

Change from v1:
  Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
  accessors as suggested by Anthony Liguori.

Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26 15:37:35 +00:00
aliguori
14d50bef67 Add macro for virtio-console PCI device ID (Mark McLoughlin)
Also use the existing macro for the PCI vendor ID

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6439 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26 15:22:46 +00:00
aliguori
3023f3329d graphical_console_init change (Stefano Stabellini)
Patch 5/7

This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.

This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.

This patch does *not* include any required changes to any device, these
changes come with the following patches.

Patch 6/7

This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;

In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.

Patch 7/7

This patch updates the graphic device code to use the new
graphical_console_init function.

As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16 19:04:14 +00:00
aliguori
cb457d7679 Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)
Add a table of PCI NIC models to pass to qemu_setup_nic_model().

While we're at it, also add a corresponding table of NIC init
functions.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13 19:47:10 +00:00
blueswir1
c190ea0729 Add EBUS bridge
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6266 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-10 11:33:32 +00:00
aurel32
475dc65f6d PCI: Mask writes to RO bits in the command reg of PCI config space
The Command register in the PCI config space has some read-only bits.
Any writes to those bits should be masked out.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6092 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18 22:43:40 +00:00
aurel32
8098ed414a PCI: Mask writes to RO bits in the status reg of PCI config space
The Status register in the PCI config space has some read-only bits.
Any writes to those bits should be masked out.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6091 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18 22:43:33 +00:00
aliguori
d350d97d19 pci: add default pci subsystem id for all devices (Gerd Hoffman)
This sets a default PCI subsystem ID for all emulated PCI devices.  PCI
specs require this, so do it.

In many cases it is enougth to know the PCI ID to handle a device
correctly.  Sometimes a device driver must identify the exact piece of
hardware (via PCI Subsystem ID) though.

What does this patch to qemu devices:

Right now the emulated PCI devices have no PCI subsystem ID, only the
PCI ID.  The discussed patch sets a default PCI subsystem ID for all
emulated devices.  Which will make the qemu devices look pretty much
like in the laptop case: all PCI subsystem IDs will point to qemu by
default.

If a driver emulates a very specific piece of hardware where it has to
emulate more than just the PCI chip, it can overwrite the PCI subsystem
ID without problems.  The es1370 driver does that for example.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5986 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-11 21:15:42 +00:00
aurel32
b79e175259 SH4: kill a few warnings
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5938 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07 22:46:42 +00:00
balrog
7c23b89203 E1000 NIC emulation (Nir Peleg, patch from Dor Laor).
Applied %s/^\([^I ]*\)^I/\1    /g on e1000.c and added e1000 to help message.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3949 c046a42c-6fe2-441c-8c8c-71466251a162
2008-02-03 02:20:18 +00:00
ths
e4bcb14c79 Add -drive parameter, by Laurent Vivier.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-02 04:51:10 +00:00
pbrook
87ecb68bdf Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17 17:14:51 +00:00