The HiFive Unleashed board wires GPIO pin#10 to the input of the
system reset signal. Let's set up the GPIO pin#10 and insert a
"gpio-restart" device tree node so that reboot is now functional
with QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the GPIO output IRQs are triggered each time any GPIO
register is written. However this is not correct. We should only
trigger the output IRQ when the pin is configured as output enable.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-9-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-9-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines.
This hooks the exsiting SiFive GPIO model to the SoC, and adds its
device tree data as well.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a new property to represent the number of GPIO pins supported
by the GPIO controller.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-7-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-7-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do various minor clean-ups to the exisiting codes for:
- coding convention conformance
- remove unnecessary blank lines
- spell SiFive correctly
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-6-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upstream U-Boot v2020.07 codes switch to access SiFive FU540 OTP
based on device tree information. Let's generate the device tree
node for OTP.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-5-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is no need to retrieve all PLIC IRQ information in order to
just connect the GEM IRQ. Use qdev_get_gpio_in() directly like
what is done for other peripherals.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-4-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This was done in the virt & sifive_u codes, but opentitan codes were
missed. Remove the riscv_ prefix of the machine* and soc* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-3-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This was done in the virt & sifive_u codes, but sifive_e codes were
missed. Remove the riscv_ prefix of the machine* and soc* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-2-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The Ibex core contains a PLIC that although similar to the RISC-V spec
is not RISC-V spec compliant.
This patch implements a Ibex PLIC in a somewhat generic way.
As the current RISC-V PLIC needs tidying up, my hope is that as the Ibex
PLIC move towards spec compliance this PLIC implementation can be
updated until it can replace the current PLIC.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is the initial commit of the Ibex UART device. Serial TX is
working, while RX has been implemeneted but untested.
This is based on the documentation from:
https://docs.opentitan.org/hw/ip/uart/doc/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
TPM subsytem is split into backends (see commit f4ede81eed)
and frontends (see i.e. 3676bc69b3). Keep the emulated
hardware 'frontends' under hw/tpm/, but move the backends
in the backends/tpm/ directory.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200612085444.8362-13-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
We are going to split the TPM backends from the TPM emulated
hardware in the next commit. Make the TPM util helpers accessible
by moving local "tpm_util.h" to global "sysemu/tpm_util.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-12-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
We are going to make "tpm_util.h" publicly accessible by
moving it to the include/ directory in the next commit.
The DEFINE_PROP_TPMBE() macro is only meaningful for the
TPM hardware files (in hw/tpm/), so keep this macro in a
local header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-11-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
We are going to make "tpm_util.h" publicly accessible by
moving it to the include/ directory in a pair of commits.
Keep declarations internals to hw/tpm/ in "tpm_int.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-10-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The trace_event_get_state_backends() call is useful to avoid
making extensive calls (usually preparing arguments passed to
the tracing framework. In this case, the extensive work is
done in tpm_util_show_buffer(), and the arguments used to
call it don't involve extra processing. Simplify by moving
the TRACE_TPM_UTIL_SHOW_BUFFER check to tpm_util_show_buffer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-9-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Nothing in "tpm_ppi.h" require declarations from "hw/acpi/tpm.h".
Reduce dependencies and include it only in the files requiring it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-7-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Files using the TPM_STANDARD_CMDLINE_OPTS macro declared in
"tpm_int.h" will use QEMU_OPT_STRING definition declared in
"qemu/option.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-6-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
From CODING_STYLE.rst:
Do not include "qemu/osdep.h" from header files since the .c
file will have already included it.
Remove "qemu/osdep.h" from "tpm_tis.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-5-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The TPMDEV describe TPM backends. Use the TPM_BACKEND config
name which is self-explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-4-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Fix audio on software that accesses DRAM above 64k via register
peek/poke and some cases when more than 16 voices are used.
Cc: qemu-stable@nongnu.org
Fixes: 135f5ae197 ("audio: GUSsample is int16_t")
Signed-off-by: Allan Peramaki <aperamak@pp1.inet.fi>
Tested-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200618103623.6031-1-philmd@redhat.com
Message-Id: <20200615201757.16868-1-aperamak@pp1.inet.fi>
[PMD: Removed unrelated style changes]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJe62kmAAoJEO8Ells5jWIRZfUH/2bPZrhG4QEKNWbm1LXzam+0
4dzG3A7vYTKWjfbpzcWtUAELO+4SiUe/IU3gYMiyeWNDKjwm5hX/FMCFjnR1IZXl
wQ7cvr/7TIsxt9HyrjIkh03PkJBGpCD3uO0DkGd1siDmKLOFNRt0uLsmSvA7Ydvo
2hH/tc/plYoQAxPSbXBmIqg9hRrks/QAw2kfPba7Adhtzg5x2XrUrP+UOW8NmWcL
xSo02ExPUSdzPX6I4Enwm1c1KiytlQ77LvazpI2NBlejsI4nqa0Y1WJW7WJ4RMGo
E1kWDiKt69MoT1SgH7UJnF/ISyUuldksD4fuual5UOysCpwpbAIBKh6/Yod6k0M=
=3+ix
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 18 Jun 2020 14:16:22 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (33 commits)
net: Drop the NetLegacy structure, always use Netdev instead
net: Drop the legacy "name" parameter from the -net option
hw/net/e1000e: Do not abort() on invalid PSRCTL register value
colo-compare: Fix memory leak in packet_enqueue()
net/colo-compare.c: Correct ordering in complete and finalize
net/colo-compare.c: Check that colo-compare is active
net/colo-compare.c: Only hexdump packets if tracing is enabled
net/colo-compare.c: Fix deadlock in compare_chr_send
chardev/char.c: Use qemu_co_sleep_ns if in coroutine
net/colo-compare.c: Create event_bh with the right AioContext
net: use peer when purging queue in qemu_flush_or_purge_queue_packets()
net: cadence_gem: Fix RX address filtering
net: cadence_gem: TX_LAST bit should be set by guest
net: cadence_gem: Update the reset value for interrupt mask register
net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg
net: cadence_gem: Add support for jumbo frames
net: cadence_gem: Fix up code style
net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState
net: cadence_gem: Set ISR according to queue in use
net: cadence_gem: Define access permission for interrupt registers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Two defects are fixed:
1/ Detection of multicast frames
2/ Treating drop of mis-addressed frames as non-error
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
TX_LAST bit should not be set by hardware, its set by guest to inform
the last bd of the frame.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mask all interrupt on reset.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Advertise support of clear-on-read for ISR registers.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a property "jumbo-max-len", which sets default value of jumbo frames
up to 16,383 bytes. Add Frame length checks for standard and jumbo
frames.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix the code style for register definitions.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Moving this buffers to CadenceGEMState, as their size will be increased
more when JUMBO frames support is added.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Set ISR according to queue in use, added interrupt support for
all queues.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Q1 to Q7 ISR's are clear-on-read, IER/IDR registers
are write-only, mask reg are read-only.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Set irq's specific to a queue, present implementation is setting q1 irq
based on q0 status.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
During wrap around and reset, queues are pointing to initial base
address of queue 0, irrespective of what queue we are dealing with.
Fix it by assigning proper base address every time.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Enabling debug breaks the build, Fix them and make debug statements
always compilable. Fix few statements to use sized integer casting.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Log with GUEST_ERROR what the guest is doing wrong.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Bit #14 is "DE" for 'Descriptor Error':
When set, indicates a frame truncation caused by a frame
that does not fit within the current descriptor buffers,
and that the 21143 does not own the next descriptor.
[Table 4-1. RDES0 Bit Fields Description]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The tulip network driver in a qemu-system-hppa emulation is broken in
the sense that bigger network packages aren't received any longer and
thus even running e.g. "apt update" inside the VM fails.
The breakage was introduced by commit 8ffb7265af ("check frame size and
r/w data length") which added checks to prevent accesses outside of the
rx/tx buffers.
But the new checks were implemented wrong. The variable rx_frame_len
counts backwards, from rx_frame_size down to zero, and the variable len
is never bigger than rx_frame_len, so accesses just can't happen and the
checks are unnecessary.
On the contrary the checks now prevented bigger packages to be moved
into the rx buffers.
This patch reverts the wrong checks and were sucessfully tested with a
qemu-system-hppa emulation.
Fixes: 8ffb7265af ("check frame size and r/w data length")
Buglink: https://bugs.launchpad.net/bugs/1874539
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Removal of duplicated RSC definitions. Changing names of the
fields to ones defined in the Linux header.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Save and restore RSS/hash report configuration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Suggest VIRTIO_NET_F_HASH_REPORT if specified in device
parameters.
If the VIRTIO_NET_F_HASH_REPORT is set,
the device extends configuration space. If the feature
is negotiated, the packet layout is extended to
accomodate the hash information. In this case deliver
packet's hash value and report type in virtio header
extension.
Use for configuration the same procedure as already
used for RSS. We add two fields in rss_data that
controls what the device does with the calculated hash
if rss_data.enabled is set. If field 'populate' is set
the hash is set in the packet, if field 'redirect' is
set the hash is used to decide the queue to place the
packet to.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If VIRTIO_NET_F_RSS negotiated and RSS is enabled, process
incoming packets, calculate packet's hash and place the
packet into respective RX virtqueue.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
- enhance handling of size-related BlockConf properties
- nvme: small fixes, refactoring and cleanups
- virtio-blk: On restart, process queued requests in the proper context
- icount: make dma reads deterministic
- iotests: Some fixes for rarely run cases
- .gitignore: Ignore storage-daemon files
- Minor code cleanups
-----BEGIN PGP SIGNATURE-----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=fyFP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- enhance handling of size-related BlockConf properties
- nvme: small fixes, refactoring and cleanups
- virtio-blk: On restart, process queued requests in the proper context
- icount: make dma reads deterministic
- iotests: Some fixes for rarely run cases
- .gitignore: Ignore storage-daemon files
- Minor code cleanups
# gpg: Signature made Wed 17 Jun 2020 15:47:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (43 commits)
iotests: Add copyright line in qcow2.py
iotests/{190,291}: compat=0.10 is unsupported
iotests/229: data_file is unsupported
iotests/292: data_file is unsupported
iotests/041: Skip test_small_target for qed
iotests.py: Add skip_for_formats() decorator
block: lift blocksize property limit to 2 MiB
qdev-properties: add getter for size32 and blocksize
block: make BlockConf size props 32bit and accept size suffixes
qdev-properties: make blocksize accept size suffixes
qdev-properties: add size32 property type
qdev-properties: blocksize: use same limits in code and description
block: consolidate blocksize properties consistency checks
virtio-blk: store opt_io_size with correct size
.gitignore: Ignore storage-daemon files
hw/block/nvme: verify msix_init_exclusive_bar() return value
hw/block/nvme: add msix_qsize parameter
hw/block/nvme: Verify msix_vector_use() returned value
hw/block/nvme: factor out controller identify setup
hw/block/nvme: do cmb/pmr init as part of pci init
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crw region can be used to obtain information about
Channel Report Words (CRW) from vfio-ccw driver.
Currently only channel-path related CRWs are passed to
QEMU from vfio-ccw driver.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-7-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have a use case (vfio-ccw) where a CRW is already built and
ready to use. Rather than teasing out the components just to
reassemble it later, let's rework this code so we can queue a
fully-qualified CRW directly.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Make it easier to add new ones in the future.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The schib region can be used to obtain the latest SCHIB from the host
passthrough subchannel. Since the guest SCHIB is virtualized,
we currently only update the path related information so that the
guest is aware of any path related changes when it issues the
'stsch' instruction.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While we're at it, add a g_free() for the async_cmd_region that
is the last thing currently created. g_free() knows how to handle
NULL pointers, so this makes it easier to remember what cleanups
need to be performed when new regions are added.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Logical and physical block sizes in QEMU are limited to 32 KiB.
This appears unnecessarily tight, and we've seen bigger block sizes
handy at times.
Lift the limitation up to 2 MiB which appears to be good enough for
everybody, and matches the qcow2 cluster size limit.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-9-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add getter for size32, and use it for blocksize, too.
In its human-readable branch, it reports approximate size in
human-readable units next to the exact byte value, like the getter for
64bit size does.
Adjust the expected test output accordingly.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-8-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert all size-related properties in BlockConf to 32bit. This will
accommodate bigger block sizes (in a followup patch). This also allows
to make them all accept size suffixes, either via DEFINE_PROP_BLOCKSIZE
or via DEFINE_PROP_SIZE32.
Also, since min_io_size is exposed to the guest by scsi and virtio-blk
devices as an uint16_t in units of logical blocks, introduce an
additional check in blkconf_blocksizes to prevent its silent truncation.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-7-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It appears convenient to be able to specify physical_block_size and
logical_block_size using common size suffixes.
Teach the blocksize property setter to interpret them. Also express the
upper and lower limits in the respective units.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-6-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce size32 property type which handles size suffixes (k, m, g)
just like size property, but is uint32_t rather than uint64_t. It's
going to be useful for properties that are byte sizes but are inherently
32bit, like BlkConf.opt_io_size or .discard_granularity (they are
switched to this new property type in a followup commit).
The getter for size32 is left out for a separate patch as its benefit is
less obvious, and it affects test output; for now the regular uint32
getter is used.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-5-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make it easier (more visible) to maintain the limits on the blocksize
properties in sync with the respective description, by using macros both
in the code and in the description.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-4-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several block device properties related to blocksize configuration must
be in certain relationship WRT each other: physical block must be no
smaller than logical block; min_io_size, opt_io_size, and
discard_granularity must be a multiple of a logical block.
To ensure these requirements are met, add corresponding consistency
checks to blkconf_blocksizes, adjusting its signature to communicate
possible error to the caller. Also remove the now redundant consistency
checks from the specific devices.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20200528225516.1676602-3-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The width of opt_io_size in virtio_blk_config is 32bit. However, it's
written with virtio_stw_p; this may result in value truncation, and on
big-endian systems with legacy virtio in completely bogus readings in
the guest.
Use the appropriate accessor to store it.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200528225516.1676602-2-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass an Error to msix_init_exclusive_bar() and check it.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20200609190333.59390-23-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Decouple the requested maximum number of ioqpairs (param max_ioqpairs)
from the number of MSI-X interrupt vectors by introducing a new
msix_qsize parameter and initialize MSI-X with that. This allows
emulating a device that has fewer vectors than I/O queue pairs and also
allows more than 2048 queue pairs. To keep the device behaving as
previously, use a msix_qsize default of 65 (default max_ioqpairs + 1).
This decoupling was actually suggested by Maxim some time ago in a
slightly different context, so adding a Suggested-by.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20200609190333.59390-22-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
msix_vector_use() returns -EINVAL on error. Assert it won't.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609190333.59390-21-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-20-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609190333.59390-19-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609190333.59390-18-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-17-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-16-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-15-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce some small helpers to make the next patches easier on the eye.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-14-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-13-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-12-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-11-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-10-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The num_queues device paramater has a slightly confusing meaning because
it accounts for the admin queue pair which is not really optional.
Secondly, it is really a maximum value of queues allowed.
Add a new max_ioqpairs parameter that only accounts for I/O queue pairs,
but keep num_queues for compatibility.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-9-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First, since the device only supports MSI-X or pin-based interrupt, if
MSI-X is not enabled, it should not accept interrupt vectors different
from 0 when creating completion queues.
Secondly, the irq_status NvmeCtrl member is meant to be compared to the
INTMS register, so it should only be 32 bits wide. And it is really only
useful when used with multi-message MSI.
Third, since we do not force a 1-to-1 correspondence between cqid and
interrupt vector, the irq_status register should not have bits set
according to cqid, but according to the associated interrupt vector.
Fix these issues, but keep irq_status available so we can easily support
multi-message MSI down the line.
Fixes: 5e9aa92eb1 ("hw/block: Fix pin-based interrupt behaviour of NVMe")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-8-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pull the controller memory buffer check to its own function. The check
will be used on its own in later patches.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-7-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-6-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move device configuration parameters to separate struct to make it
explicit what is configurable and what is set internally.
Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200609190333.59390-5-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These break statements was left over when commit 3036a626e9 ("nvme:
add Get/Set Feature Timestamp support") was merged.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-4-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the prefix of all nvme device related trace events to 'pci_nvme'
to not clash with trace events from the nvme block driver.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-3-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The size of the BAR is 0x1000 (main registers) + 8 bytes for each
queue. Currently, the size of the BAR is calculated like so:
n->reg_size = pow2ceil(0x1004 + 2 * (n->num_queues + 1) * 4);
Since the 'num_queues' parameter already accounts for the admin queue,
this should in any case not need to be incremented by one. Also, the
size should be initialized to (0x1000).
n->reg_size = pow2ceil(0x1000 + 2 * n->num_queues * 4);
This, with the default value of num_queues (64), we will set aside room
for 1 admin queue and 63 I/O queues (4 bytes per doorbell, 2 doorbells
per queue).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-2-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On restart, we were scheduling a BH to process queued requests, which
would run before starting up the data plane, leading to those requests
being assigned and started on coroutines on the main context.
This could cause requests to be wrongly processed in parallel from
different threads (the main thread and the iothread managing the data
plane), potentially leading to multiple issues.
For example, stopping and resuming a VM multiple times while the guest
is generating I/O on a virtio_blk device can trigger a crash with a
stack tracing looking like this one:
<------>
Thread 2 (Thread 0x7ff736765700 (LWP 1062503)):
#0 0x00005567a13b99d6 in iov_memset
(iov=0x6563617073206f4e, iov_cnt=1717922848, offset=516096, fillc=0, bytes=7018105756081554803)
at util/iov.c:69
#1 0x00005567a13bab73 in qemu_iovec_memset
(qiov=0x7ff73ec99748, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:530
#2 0x00005567a12f411c in qemu_laio_process_completion (laiocb=0x7ff6512ee6c0) at block/linux-aio.c:86
#3 0x00005567a12f42ff in qemu_laio_process_completions (s=0x7ff7182e8420) at block/linux-aio.c:217
#4 0x00005567a12f480d in ioq_submit (s=0x7ff7182e8420) at block/linux-aio.c:323
#5 0x00005567a12f43d9 in qemu_laio_process_completions_and_submit (s=0x7ff7182e8420)
at block/linux-aio.c:236
#6 0x00005567a12f44c2 in qemu_laio_poll_cb (opaque=0x7ff7182e8430) at block/linux-aio.c:267
#7 0x00005567a13aed83 in run_poll_handlers_once (ctx=0x5567a2b58c70, timeout=0x7ff7367645f8)
at util/aio-posix.c:520
#8 0x00005567a13aee9f in run_poll_handlers (ctx=0x5567a2b58c70, max_ns=16000, timeout=0x7ff7367645f8)
at util/aio-posix.c:562
#9 0x00005567a13aefde in try_poll_mode (ctx=0x5567a2b58c70, timeout=0x7ff7367645f8)
at util/aio-posix.c:597
#10 0x00005567a13af115 in aio_poll (ctx=0x5567a2b58c70, blocking=true) at util/aio-posix.c:639
#11 0x00005567a109acca in iothread_run (opaque=0x5567a2b29760) at iothread.c:75
#12 0x00005567a13b2790 in qemu_thread_start (args=0x5567a2b694c0) at util/qemu-thread-posix.c:519
#13 0x00007ff73eedf2de in start_thread () at /lib64/libpthread.so.0
#14 0x00007ff73ec10e83 in clone () at /lib64/libc.so.6
Thread 1 (Thread 0x7ff743986f00 (LWP 1062500)):
#0 0x00005567a13b99d6 in iov_memset
(iov=0x6563617073206f4e, iov_cnt=1717922848, offset=516096, fillc=0, bytes=7018105756081554803)
at util/iov.c:69
#1 0x00005567a13bab73 in qemu_iovec_memset
(qiov=0x7ff73ec99748, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:530
#2 0x00005567a12f411c in qemu_laio_process_completion (laiocb=0x7ff6512ee6c0) at block/linux-aio.c:86
#3 0x00005567a12f42ff in qemu_laio_process_completions (s=0x7ff7182e8420) at block/linux-aio.c:217
#4 0x00005567a12f480d in ioq_submit (s=0x7ff7182e8420) at block/linux-aio.c:323
#5 0x00005567a12f4a2f in laio_do_submit (fd=19, laiocb=0x7ff5f4ff9ae0, offset=472363008, type=2)
at block/linux-aio.c:375
#6 0x00005567a12f4af2 in laio_co_submit
(bs=0x5567a2b8c460, s=0x7ff7182e8420, fd=19, offset=472363008, qiov=0x7ff5f4ff9ca0, type=2)
at block/linux-aio.c:394
#7 0x00005567a12f1803 in raw_co_prw
(bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, type=2)
at block/file-posix.c:1892
#8 0x00005567a12f1941 in raw_co_pwritev
(bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, flags=0)
at block/file-posix.c:1925
#9 0x00005567a12fe3e1 in bdrv_driver_pwritev
(bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, qiov_offset=0, flags=0)
at block/io.c:1183
#10 0x00005567a1300340 in bdrv_aligned_pwritev
(child=0x5567a2b5b070, req=0x7ff5f4ff9db0, offset=472363008, bytes=20480, align=512, qiov=0x7ff72c0425b8, qiov_offset=0, flags=0) at block/io.c:1980
#11 0x00005567a1300b29 in bdrv_co_pwritev_part
(child=0x5567a2b5b070, offset=472363008, bytes=20480, qiov=0x7ff72c0425b8, qiov_offset=0, flags=0)
at block/io.c:2137
#12 0x00005567a12baba1 in qcow2_co_pwritev_task
(bs=0x5567a2b92740, file_cluster_offset=472317952, offset=487305216, bytes=20480, qiov=0x7ff72c0425b8, qiov_offset=0, l2meta=0x0) at block/qcow2.c:2444
#13 0x00005567a12bacdb in qcow2_co_pwritev_task_entry (task=0x5567a2b48540) at block/qcow2.c:2475
#14 0x00005567a13167d8 in aio_task_co (opaque=0x5567a2b48540) at block/aio_task.c:45
#15 0x00005567a13cf00c in coroutine_trampoline (i0=738245600, i1=32759) at util/coroutine-ucontext.c:115
#16 0x00007ff73eb622e0 in __start_context () at /lib64/libc.so.6
#17 0x00007ff6626f1350 in ()
#18 0x0000000000000000 in ()
<------>
This is also known to cause crashes with this message (assertion
failed):
aio_co_schedule: Co-routine was already scheduled in 'aio_co_schedule'
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1812765
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20200603093240.40489-3-slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the code that processes queued requests from
virtio_blk_dma_restart_bh() to its own, non-static, function. This
will allow us to call it from the virtio_blk_data_plane_start() in a
future patch.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20200603093240.40489-2-slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Handlers don't need to modify the IDEDMA structure.
Make it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200512194917.15807-1-philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move from X86MachineClass to PCMachineClass so it disappears
from microvm machine type property list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-id: 20200529073957.8018-4-kraxel@redhat.com
Not useful for microvm and allows users to shoot themself
into the foot (make ram + mmio overlap).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200529073957.8018-3-kraxel@redhat.com
Looks like the logic was copied over from q35.
q35 does this for backward compatibility, there is no reason to do this
on microvm though. Also microvm doesn't need much mmio space, 1G is
more than enough. Using an mmio window smaller than 1G is bad for
gigabyte alignment and hugepages though. So split @ 3G unconditionally.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200529073957.8018-2-kraxel@redhat.com
libusb seems to no allways call the completion callback for requests
canceled (which it is supposed to do according to the docs). So add
a limit to avoid qemu waiting forever.
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200529072225.3195-1-kraxel@redhat.com>
The new property allows to specify usb host device name. Uses standard
qemu_open(), so both file system path (/dev/bus/usb/$bus/$dev on linux)
and file descriptor passing can be used.
Requires libusb 1.0.23 or newer. The hostdevice property is only
present in case qemu is compiled against a new enough library version,
so the presence of the property can be used for feature detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200605125952.13113-1-kraxel@redhat.com>
We convert queued work to a QSIMPLEQ, instead of
open-coding it.
While at it, make sure that all accesses to the list are
performed while holding the list's lock.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-3-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-6-alex.bennee@linaro.org>
Set vendor property to IMX to enable IMX specific functionality
in sdhci code.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200603145258.195920-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel's IMX code now uses vendor specific commands.
This results in endless warnings when booting the Linux kernel.
sdhci-esdhc-imx 2194000.usdhc: esdhc_wait_for_card_clock_gate_off:
card clock still not gate off in 100us!.
Implement support for the vendor specific command implemented in IMX hardware
to be able to avoid this warning.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200603145258.195920-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Fixed 32-bit format string using PRIx32/PRIx64]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hardware supports configurable descriptor sizes, configured in the DBLAC
register.
Most drivers use the default 4 word descriptor, which is currently hardcoded,
but Aspeed SDK configures 8 words to store extra data.
Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[PMM: removed unnecessary parens]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some bits of the CCM registers are non writable.
This was left undone in the initial commit (all bits of registers were
writable).
This patch adds the required code to protect the non writable bits.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20200608133508.550046-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-58-armbru@redhat.com>
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
So far, qdev_realize() supports only devices that plug into a bus:
argument @bus cannot be null. Extend it to support bus-less devices,
too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-55-armbru@redhat.com>
init_event_facility() creates the SCLP events bus with two SCLP event
devices (sclpquiesce and sclp-cpu-hotplug). It leaves the devices
unrealized. A comment explains they will be realized "via the bus".
The bus's realize method sclp_events_bus_realize() indeed realizes all
unrealized devices on this bus. It carries a TODO comment claiming
this "has to be done in common code". No other bus realize method
realizes its devices.
The common code in question is bus_set_realized(), which has a TODO
comment asking for recursive realization. It's been asking for years.
The only devices sclp_events_bus_realize() will ever realize are the
two init_event_facility() puts there.
Simplify as follows:
* Make the devices members of the event facility instance struct, just
like the bus. object_initialize_child() is simpler than
object_property_add_child() and object_unref().
* Realize them in the event facility realize method.
This is in line with how such things are done elsewhere.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-54-armbru@redhat.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-53-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-52-armbru@redhat.com>
This is still the same transformation as in the previous commits, but
here the sysbus_init_child_obj() and its matching realize in are in
separate files. Fortunately, there's just one realize left to
convert.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-51-armbru@redhat.com>
These are init/realize pairs produced by the previous commit's
Coccinelle script where the argument test doesn't quite match. They
need even more careful review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-50-armbru@redhat.com>
This is the same transformation as in the previous commit, except
sysbus_init_child_obj() and realize are too separated for the commit's
Coccinelle script to handle, typically because sysbus_init_child_obj()
is in a device's instance_init() method, and the matching realize is
in its realize() method.
Perhaps a Coccinelle wizard could make it transform that pattern, but
I'm just a bungler, and the best I can do is transforming the two
separate parts separately:
@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(OBJECT(child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(child, true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
@@
- qdev_init_nofail(DEVICE(child));
+ sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
expression dev;
@@
dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
identifier dev;
@@
DeviceState *dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression parent, name, size, type;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
+ object_initialize_child(parent, propname, child, type)
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
+ object_initialize_child(parent, propname, &child, type)
This script is *unsound*: we need to manually verify init and realize
conversions are properly paired.
This commit has only the pairs where object_initialize_child()'s
@child and sysbus_realize()'s @dev argument text match exactly within
the same source file.
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
The "null @bus means main system bus" convenience feature is no longer
used. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-47-armbru@redhat.com>
Sysbus devices almost always plug into the main system bus.
qdev_create() even has a convenience feature to make that easy: a null
bus argument gets replaced by the main system bus. qdev_realize() and
qdev_realize_and_unref() do the same.
We can do better. Provide convenience wrappers around qdev_realize()
and qdev_realize_and_unref() that don't take a @bus argument. They
always pass the main system bus.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-45-armbru@redhat.com>
The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that use
something else instead, mostly to keep future commits simpler.
Coccinelle script:
@@
expression parent, propname, type;
expression child;
type T;
T proxy;
@@
(
sysbus_init_child_obj(parent, propname, &child, sizeof(child), type)
|
sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)
|
- sysbus_init_child_obj(parent, propname, child, sizeof(proxy), type)
+ sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)
)
This script is *unsound*: for each change we need to verify the
@childsize argument stays the same. I did.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-44-armbru@redhat.com>
armsse_init() initializes s->armv7m[i] for all i. It passes the size
of the entire array instead of the array element to
sysbus_init_child_obj(). Harmless, but fix it anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-43-armbru@redhat.com>
The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild). Tidy up two that don't,
mostly to keep future commits simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-41-armbru@redhat.com>
OBJECT(child) expands to ((Object *)(child)). sysbus_init_child_obj()
parameter @child is void *. Pass child instead of OBJECT(child).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-40-armbru@redhat.com>
macio_init_child_obj() has become a trivial wrapper around
object_initialize_child_with_props(). Eliminate it, since the general
convenience wrapper object_initialize_child() is just as convenient
already.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-39-armbru@redhat.com>
Convert qdev_set_parent_bus()/realize to qdev_realize(); recent commit
"qdev: New qdev_new(), qdev_realize(), etc." explains why.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-38-armbru@redhat.com>
The callers of object_initialize_child() commonly pass either
&child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few
that don't, mostly to keep the next commit simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-36-armbru@redhat.com>
aux_create_slave() has become a trivial wrapper around qdev_new().
There's just one user. Eliminate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-35-armbru@redhat.com>
aux_bus_init() encapsulates the creation of an aux-bus and its
aux-to-i2c-bridge device.
Create aux_bus_realize() to similarly encapsulate their realization.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-33-armbru@redhat.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-32-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-31-armbru@redhat.com>
usb_try_create_simple() is qdev_try_new() and qdev_realize_and_unref()
with more verbose error messages. Of its two users, one ignores
errors, and the other asserts they are impossible.
Make them use qdev_try_new() and qdev_realize_and_unref() directly,
and eliminate usb_try_create_simple
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-30-armbru@redhat.com>
I'm converting from qdev_create()/qdev_init_nofail() to
qdev_new()/qdev_realize_and_unref(); recent commit "qdev: New
qdev_new(), qdev_realize(), etc." explains why.
USB devices use qdev_create() through usb_create().
Provide usb_new() and usb_realize_and_unref() for converting USB
devices.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-27-armbru@redhat.com>
Cc: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-26-armbru@redhat.com>
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform this case is not worthwhile.
Cc: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-25-armbru@redhat.com>
ssi_auto_connect_slaves(parent, cs_line, bus) iterates over @parent's
QOM children @dev of type TYPE_SSI_SLAVE. It puts these on @bus, and
sets cs_line[] to qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0).
Suspicious: there is no protection against overrunning cs_line[].
Turns out it's safe because ssi_auto_connect_slaves() never finds any
such children. Its called by realize methods of some (but not all)
devices providing an SSI bus, and gets passed the device.
SSI slave devices are always created with ssi_create_slave_no_init(),
optionally via ssi_create_slave(). This adds them to their SSI bus.
It doesn't set their QOM parent.
ssi_create_slave_no_init() is always immediately followed by
qdev_init_nofail(), with no QOM parent assigned, so
device_set_realized() puts the device into the /machine/unattached/
orphanage. None become QOM children of a device providing an SSI bus.
ssi_auto_connect_slaves() was added in commit b4ae3cfa57 "ssi: Add
slave autoconnect helper". I can't see which slaves it was supposed
to connect back then.
Cc: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-23-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-22-armbru@redhat.com>
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is not worthwhile.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-21-armbru@redhat.com>
I'm converting from qdev_create()/qdev_init_nofail() to
qdev_new()/qdev_realize_and_unref(); recent commit "qdev: New
qdev_new(), qdev_realize(), etc." explains why.
ISA devices use qdev_create() through isa_create() and
isa_try_create().
Provide isa_new(), isa_try_new(), and isa_realize_and_unref() for
converting ISA devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-19-armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-18-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is not worthwhile.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-17-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-15-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
I'm converting from qdev_create()/qdev_init_nofail() to
qdev_new()/qdev_realize_and_unref(); recent commit "qdev: New
qdev_new(), qdev_realize(), etc." explains why.
PCI devices use qdev_create() through pci_create() and
pci_create_multifunction().
Provide pci_new(), pci_new_multifunction(), and
pci_realize_and_unref() for converting PCI devices.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-14-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is somewhere between
not worthwhile and infeasible (at least for me).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-13-armbru@redhat.com>
In addition to the qdev_create() patterns converted so far, we have a
qdev_set_parent_bus() pattern. Mostly when we embed a device in a
parent device rather than allocating it on the heap.
This pattern also puts devices in the dangerous "no QOM parent, but
plugged into bus" state I explained in recent commit "qdev: New
qdev_new(), qdev_realize(), etc."
Apply same solution: convert to qdev_realize(). Coccinelle script:
@@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), bus, errp);
@ depends on !(file in "qdev-monitor.c") && !(file in "hw/core/qdev.c")@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(dev, bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(dev, bus, errp);
@@
expression dev, bus;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize(DEVICE(dev), bus, &error_fatal);
Unconverted uses of qdev_set_parent_bus() remain. They'll be
converted later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-12-armbru@redhat.com>
[Also convert new hw/virtio/vhost-user-vsock-pci.c]
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is somewhere between
not worthwhile and infeasible (at least for me).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
