This patch removes some unnecessary casts in the rtl8139 device,
introduced by commit 3ada003aee
'rtl8139: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the lsi53c895a device,
introduced by commit 9ba4524cda
'lsi53c895a: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the PCI IDE device,
introduced by commit 552908fef5
'PCI IDE: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the e1000 device,
introduced by commit 62ecbd353d 'e1000:
Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes some unnecessary casts in the eepro100 device,
introduced by commit 16ef60c9a8
'eepro100: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
hw/mpcore.c is now implementing only ARM11MPCore specific peripherals,
and is #included only from hw/arm11mpcore.c, so just merge it into that
file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the A9MP private peripheral region correctly, rather
than piggybacking on the 11MPCore code; the two CPUs are not the
same in this area.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only code left in mpcore_priv_read and mpcore_priv_write is now
the implementation of the SCU registers. Clean up by renaming functions
and removing some unnecessary conditionals to make this clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to using the GIC memory regions for the CPU interface
rather than hand implementing them as a subcase of mpcore_priv_read()
and mpcore_priv_write().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the ARM GIC CPU interfaces as memory regions, rather than
just providing read and write functions for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Turn the ARM MPcore private timer/watchdog blocks into separate
qdev devices. This will allow us to share them neatly between
11MPCore and A9MPcore.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Properly implement dual-timer read/write for the sp804 dual timer module.
Based on ARM specs at
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0271d/index.html
Signed-off-by: Hans Jang <hsjang@ok-labs.com>
Signed-off-by: David Mirabito <david.mirabito@nicta.com.au>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the i386 cmpxchg instruction is executed with a memory operand
and the comparison result is "unequal", do the memory write before
changing the accumulator instead of the other way around, because
otherwise the new accumulator value will incorrectly be used in the
comparison when the instruction is restarted after a page fault.
This bug was originally reported on 2010-04-25 as
https://bugs.launchpad.net/qemu/+bug/569760
Signed-off-by: Andreas Gustafsson <gson@gson.org>
W32 does not support line buffering, but it supports unbuffered output.
Unbuffered output is better for writing to qemu.log than fully buffered
output because it also shows the latest log messages when an application
crash occurs.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 1d14ffa97e (in 2005),
QEMU applications on W32 don't use the default SDL compiler flags:
Instead of a GUI application, a console application is created.
This has disadvantages (there is always an empty console window) and
no obvious reason, so this patch removes the strange flag modification.
The SDL GUI applications still can be run from a console window
and even send stdout and stderr to that console by setting environment
variable SDL_STDIO_REDIRECT=no.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Enable build by default PIE / read-only relocation sections for the QEMU
binaries on OpenBSD amd64/i386.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This bug was spotted by cppcheck.
Using g_try_malloc0 (as does the linux-user code) fixes this.
v2:
Use g_free in bsdload.c, too. Thanks to Peter Maydell for this hint.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Unfortunately, this conversion required an additional change.
In the old QMP command, the 'snapshot-file' argument is specified as
optional. The idea is to take the snapshot internally if 'snapshot-file'
is not passed. However, internal snapshots are not supported yet so
the command returns a MissingParamater error if 'snapshot-file' is not
passed. Which makes the argument actually required and will cause
compatibility breakage if we change that in the future.
To fix this the QAPI converted blockdev_snapshot_sync command makes the
'snapshot-file' argument required. Again, in practice it's actually required,
so this is not incompatible.
If we do implement internal snapshots someday, we'll need a new argument
for it.
Note that this discussion doesn't affect HMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Note that the command being dropped uses the deprecated MONITOR_CMD_ASYNC
API, but the new command is a regular synchronous command. There shouldn't
be visible differences though, as MONITOR_CMD_ASYNC is internal only.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Please, note that the QMP command has a new 'cpu-index' parameter.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit e235cec376 converted the query-mice
command to the QAPI but forgot to remove two prototypes used by the old
QAPI. Drop them.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 5bc465e4b1 converted only
the HMP part of the system_powerdown command to the QAPI, this
commit completes it by converting the QMP part too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It has been superseded by the two previous commits, which introduced
the test-qmp-output-visitor and test-qmp-input-visitor tests.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
test-coroutine is listed as a libcheck test in the 'checks' variable. This
is not right because 'make check' won't run test-coroutine if libcheck
tests are not enabled (either because libcheck isn't detected or because
--disable-check-utests is passed).
Tests using the glib test framework are independent from libcheck and
afaik are always present (although having a configure switch to disable
them is probably worth it).
Untangle test-coroutine from the libcheck tests by introducing the
'test_progs' variable and using it to generate the test list used by
'make check'.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Anthony wrote this quickly to aid in testing. It's similar to qmp-shell with
a few important differences:
1) It is not interactive. That makes it useful for scripting.
2) qmp-shell:
(QEMU) set_password protocol=vnc password=foo
3) qmp:
$ qmp set_password --protocol=vnc --password=foo
4) Extensible, git-style interface. If an invalid command name is
passed, it will try to exec qmp-$1.
5) It attempts to pretty print the JSON responses in a shell friendly
format such that tools can work with the output.
Hope others will also find it useful.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Ignore attempts to complete non-existent IRQs; this fixes a buffer
overrun if the guest writes a bad value to the GICC_EOIR register.
(This case is UNPREDICTABLE so ignoring it is a valid choice.)
Note that doing nothing if the guest writes 1023 to this register
is not in fact a change in behaviour: the old code would also
always do nothing in this case but in a non-obvious way.
(The buffer overrun was noted by Coverity, see bug 887883.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Drop the distinction between armv4l/armv4b in the $cpu variable
(ie host cpu type) in favour of calling everything 'arm'. This
makes it the same as the ARCH setting and removes some special
casing. The only thing we were using the distinction for was to
decide which endianness to use in cross compilation; do a cpp
define check there instead.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7)
iterations. However this overruns the 'bars' global array, which only has
6 elements. In fact we only want to run this loop for things listed in the
bars array, so this patch corrects the loop bounds to reflect that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
