Add a new function print_raw_param64() to print 64-bit values in the
same way as print_raw_param(). This prevents that qemu_log() is used to
work around the problem that print_raw_param() can only print 32-bit
values when compiled for 32-bit targets.
Additionally convert the existing 64-bit users in print_timespec64(),
print_rlimit64() and print_preadwrite64() over to this new function and
drop some unneccessary spaces.
Suggested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9lNbFNyRSUhhrHa@p100>
[lvivier: remove print_preadwrite64 and print_rlimit64 part]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current brk() implementation does not de-allocate pages if a lower
address is given compared to earlier brk() calls.
But according to the manpage, brk() shall deallocate memory in this case
and currently it breaks a real-world application, specifically building
the debian gcl package in qemu-user.
Fix this issue by reworking the qemu brk() implementation.
Tested with the C-code testcase included in qemu commit 4d1de87c75, and
by building debian package of gcl in a hppa-linux guest on a x86-64
host.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <Y6gId80ek49TK1xB@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some programs want to match an actual task state character.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmedq2kxoe.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Define xtensa-specific info_is_fdpic and fill in FDPIC-specific
registers in the xtensa version of init_thread.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230205061230.544451-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
target_rlimit64 contains uint64_t fields, so it's 8-byte aligned on
some hosts, while some guests may align their respective type on a
4-byte boundary. This may lead to an unaligned access, which is an UB.
Fix by defining the fields as abi_ullong. This makes the host alignment
match that of the guest, and lets the compiler know that it should emit
code that can deal with the guest alignment.
While at it, also use __get_user() and __put_user() instead of
tswap64().
Fixes: 163a05a839 ("linux-user: Implement prlimit64 syscall")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230224003907.263914-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When reading the expiration count from a timerfd, the endianness of the
64bit value read is the one of the host, just as for eventfds.
Signed-off-by: Mathis Marion <mathis.marion@silabs.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230220085822.626798-2-Mathis.Marion@silabs.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When accsssing /proc/self/exe from a userspace program, linux-user tries
to resolve the name via realpath(), which may fail if the process
changed the working directory in the meantime.
An example:
- a userspace program ist started with ./testprogram
- the program runs chdir("/tmp")
- then the program calls readlink("/proc/self/exe")
- linux-user tries to run realpath("./testprogram") which fails
because ./testprogram isn't in /tmp
- readlink() will return -ENOENT back to the program
Avoid this issue by resolving the full path name of the started process
at startup of linux-user and store it in real_exec_path[]. This then
simplifies the emulation of readlink() and readlinkat() as well, because
they can simply copy the path string to userspace.
I noticed this bug because the testsuite of the debian package "pandoc"
failed on linux-user while it succeeded on real hardware. The full log
is here:
https://buildd.debian.org/status/fetch.php?pkg=pandoc&arch=hppa&ver=2.17.1.1-1.1%2Bb1&stamp=1670153210&raw=0
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221205113825.20615-1-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our GDB syscall support is the last chunk of code that needs target
specific support so move it to a new file. We take the opportunity to
move the syscall state into its own singleton instance and add in a
few helpers for the main gdbstub to interact with the module.
I also moved the gdb_exit() declaration into syscalls.h as it feels
pretty related and most of the callers of it treat it as such.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>
The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.
As before we split some functions into user and softmmu versions
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
Follow what kernel's full_exception() is doing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
fork()ed processes currently start with
current_cpu->in_exclusive_context set, which is, strictly speaking, not
correct, but does not cause problems (even assertion failures).
With one of the next patches, the code begins to rely on this value, so
fix it by always calling end_exclusive() in fork_end().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The linux kernel's trap tables vector all unassigned trap
numbers to BAD_TRAP, which then raises SIGILL.
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Applications do call sendmsg() without any IOV, e.g.:
sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=NULL, msg_iovlen=0,
msg_control=[{cmsg_len=36, cmsg_level=SOL_ALG, cmsg_type=0x2}],
msg_controllen=40, msg_flags=0}, MSG_MORE) = 0
sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="The quick brown fox jumps over t"..., iov_len=183}],
msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_ALG, cmsg_type=0x3}],
msg_controllen=24, msg_flags=0}, 0) = 183
The function do_sendrecvmsg_locked() is used for sndmsg() and recvmsg()
and calls lock_iovec() to lock the IOV into memory. For the first
sendmsg() above it returns NULL and thus wrongly skips the call the host
sendmsg() syscall, which will break the calling application.
Fix this issue by:
- allowing sendmsg() even with empty IOV
- skip recvmsg() if IOV is NULL
- skip both if the return code of do_sendrecvmsg_locked() != 0, which
indicates some failure like EFAULT on the IOV
Tested with the debian "ell" package with hppa guest on x86_64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221212173416.90590-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add suport to handle SOL_ALG packets via sendmsg() and recvmsg().
This allows emulated userspace to use encryption functionality.
Tested with the debian ell package with hppa guest on x86_64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221212173416.90590-1-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Both parameters have a different value on the parisc platform, so first
translate the target value into a host value for usage in the native
madvise() syscall.
Those parameters are often used by security sensitive applications (e.g.
tor browser, boringssl, ...) which expect the call to return a proper
return code on failure, so return -EINVAL if qemu fails to forward the
syscall to the host OS.
While touching this code, enhance the comments about MADV_DONTNEED.
Tested with testcase of tor browser when running hppa-linux guest on
x86-64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y5iwTaydU7i66K/i@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Make the strace look nicer for those two syscalls.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9QxskymWJjrKQmT@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa architectures provides an own output for the emulated
/proc/cpuinfo file.
Some userspace applications count (even if that's not the recommended
way) the number of lines which start with "processor:" and assume that
this number then reflects the number of online CPUs. Since those 3
architectures don't provide any such line, applications may assume "0"
CPUs. One such issue can be seen in debian bug report:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1024653
Avoid such issues by adding a "processor:" line for each of the online
CPUs.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9QvyRSq1I1k5/JW@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add translation for the host error return code of:
getsockopt(19, SOL_SOCKET, SO_ERROR, [ECONNREFUSED], [4]) = 0
This fixes the testsuite of the cockpit debian package with a
hppa-linux guest on a x86-64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y9QzNzXg0hrzHQeo@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This makes target_flat.h behave like every other target_xxx.h header.
It also makes it actually work -- while the current header says adding
a header to the target subdir overrides the common one, it doesn't.
This is for two reasons:
* meson.build adds -Ilinux-user before -Ilinux-user/$arch
* the compiler search path for "target_flat.h" looks in the same dir
as the source file before searching -I paths.
This can be seen with the xtensa port -- the subdir settings aren't
used which breaks stack setup.
Move it to the generic/ subdir and add include stubs like every
other target_xxx.h header is handled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230129004625.11228-1-vapier@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reverts commit 3cd3df2a95.
glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E
It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reverts commit c5495f4ecb.
glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E
It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently, qemu strace only prints four protocol contants. This patch
adds others listed in "linux/netlink.h".
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Message-Id: <20230101141105.12024-1-fantasquex@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reinstates commit 52f0c16076:
While forcing the CPU to unrealize by hand does trigger the clean-up
code we never fully free resources because refcount never reaches
zero. This is because QOM automatically added objects without an
explicit parent to /unattached/, incrementing the refcount.
Instead of manually triggering unrealization just unparent the object
and let the device machinery deal with that for us.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/866
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220811151413.3350684-2-alex.bennee@linaro.org>
The original patch tickled a problem in target/arm, and was reverted.
But that problem is fixed as of commit 3b07a936d3.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124201019.3935934-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
execve() is a particular case of execveat(). In order
to add do_execveat(), first factor do_execve() out.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Message-Id: <20221104081015.706009-1-sir@cmpwn.com>
[PMD: Split of bigger patch, filled description, fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221104173632.1052-5-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to add print_execveat() which re-use common code from
print_execve(), extract print_execve_argv() from it.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Message-Id: <20221104081015.706009-1-sir@cmpwn.com>
[PMD: Split of bigger patch, filled description, fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221104173632.1052-3-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This commit re-enables ppc32 as a linux-user host,
as existance of the directory is noted by configure.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1097
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220729172141.1789105-3-richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When exiting due to an exit() syscall, qemu-user calls
preexit_cleanup(), but this is currently not the case when exiting due
to a signal. This leads to various buffers not being flushed (e.g.,
for gprof, for gcov, and for the upcoming perf support).
Add the missing call.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112152013.125680-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch fixes the issue originally reported in
this thread:
https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html
The root cause of the issue is a bug in the hexagon specific
logic for saving & restoring context during signal delivery.
The CPU state has two different representations for the
predicate registers. The current logic saves & restores only
the aliased HEX_REG_P3_O register, which is part of env->gpr[]
field in the CPU state, but not the individual byte-level
predicate registers (pO, p1, p2, p3) backed by env->pred[].
Since all predicated instructions refer only to the
indiviual registers, switching to and back from a signal handler
can clobber these registers if the signal handler writes to them
causing the normal application code to behave unpredictably when
context is restored.
In the reported issue with the 'signals' test, since the updated
hexagon toolchain had built musl with -O2, the functions called
from non_trivial_free were inlined. This meant that the code
emitted reused predicate P0 computed in the entry translation
block of the function non_trivial_free in one of the child TB
as part of an assertion. Since P0 is clobbered by the signal
handler in the signals test, the assertion in non_trivial_free
fails incorectly. Since musl for hexagon implements the 'abort'
function by deliberately writing to memory via null pointer,
this causes the test to fail with segmentation fault.
This patch modifies the signal context save & restore logic
to include the individual p0, p1, p2, p3 and excludes the
32b p3_0 register since its value is derived from the former
registers. It also adds a new test case that reliabily
reproduces the issue for all four predicate registers.
Buglink: https://github.com/quic/toolchain_for_hexagon/issues/6
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229092006.10709-2-quic_mthiyaga@quicinc.com>
It's possible that a message contains both normal payload and ancillary
data in the same message, and even if no ancillary data is available
this information should be passed to the target, otherwise the target
cmsghdr will be left uninitialized and the target is going to access
uninitialized memory if it expects cmsg.
Always call the function that translate cmsg when recvmsg, because that
function should be empty-cmsg-safe (it creates an empty cmsg in the
target).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221028081220.1604244-1-uwu@icenowy.me>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The glibc on the hppa platform uses the "iitlbp %r0,(%sr0, %r0)"
assembler instruction as ABORT_INSTRUCTION.
If this (in userspace context) illegal assembler statement is found,
dump the registers and report the failure to userspace the same way as
the Linux kernel on physical hardware.
For other illegal instructions report TARGET_ILL_ILLOPC instead of
TARGET_ILL_ILLOPN as si_code.
Additionally add the missing EXCP_BREAK exception handler which occurs
when the "break x,y" assembler instruction is executed and report
EXCP_ASSIST traps.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <Y1osHVsylkuZNUnY@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When PAGE_RESET is set, we are replacing pages with new
content, which means that we need to invalidate existing
cached data, such as TranslationBlocks. Perform the
reset invalidate while we're doing other invalidates,
which allows us to remove the separate invalidates from
the user-only mmap/munmap/mprotect routines.
In addition, restrict invalidation to PAGE_EXEC pages.
Since cdf7130851, we have validated PAGE_EXEC is present
before translation, which means we can assume that if the
bit is not present, there are no translations to invalidate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the emulation stops with a hard exception it's very useful for
debugging purposes to dump the current guest memory layout (for an
example see /proc/self/maps) beside the CPU registers.
The open_self_maps() function provides such a memory dump, but since
it's located in the syscall.c file, various changes (add #includes, make
this function externally visible, ...) are needed to be able to call it
from the existing EXCP_DUMP() macro.
This patch takes another approach by re-defining EXCP_DUMP() to call
target_exception_dump(), which is in syscall.c, consolidates the log
print functions and allows to add the call to dump the memory layout.
Beside a reduced code footprint, this approach keeps the changes across
the various callers minimal, and keeps EXCP_DUMP() highlighted as
important macro/function.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y1bzAWbw07WBKPxw@p100>
[lv: remove pc declaration and setting]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
User space has been preferring this syscall for a while, due to its
closer match with C semantics, and newer platforms such as LoongArch
apparently have libc implementations that don't fallback to faccessat
so normal access checks are failing without the emulation in place.
Tested by successfully emerging several packages within a Gentoo loong
stage3 chroot, emulated on amd64 with help of static qemu-loongarch64.
Reported-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Message-Id: <20221009060813.2289077-1-xen0n@gentoo.org>
[lv: removing defined(__NR_faccessat2) in syscall.c,
adding defined(TARGET_NR_faccessat2) on print_faccessat()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These ioctls have been defined in linux/fs.h for a long time
* BLKGETSIZE64 - <2.6.12 (linux.git epoch)
* BLKDISCARD - 2.6.28 (d30a2605be9d5132d95944916e8f578fcfe4f976)
* BLKIOMIN - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKIOOPT - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKALIGNOFF - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKPBSZGET - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKDISCARDZEROES - 2.6.32 (98262f2762f0067375f83824d81ea929e37e6bfe)
* BLKSECDISCARD - 2.6.36 (8d57a98ccd0b4489003473979da8f5a1363ba7a3)
* BLKROTATIONAL - 3.2 (ef00f59c95fe6e002e7c6e3663cdea65e253f4cc)
* BLKZEROOUT - 3.6 (66ba32dc167202c3cf8c86806581a9393ec7f488)
* FIBMAP - <2.6.12 (linux.git epoch)
* FIGETBSZ - <2.6.12 (linux.git epoch)
and when building with latest glibc, we'll see compat definitions
in syscall.c anyway thanks to the previous patch. Thus we can
assume they always exist and remove the conditional checks.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221004093206.652431-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GLibc changes prevent us from including linux/fs.h anymore,
and we previously adjusted to this in
commit 3cd3df2a95
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Aug 2 12:41:34 2022 -0400
linux-user: fix compat with glibc >= 2.36 sys/mount.h
That change required adding compat ioctl definitions on the
QEMU side for any ioctls that we would otherwise obtain
from linux/fs.h. This commit adds more that were initially
missed, due to their usage being conditionalized in QEMU.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221004093206.652431-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
AT_EXECFD gives access to the binary file even if
it is not readable (only executable).
Moreover it can be opened with flags and mode that are not the ones
provided by do_openat() caller.
And it is not available because loader_exec() has closed it.
To avoid that, use only safe_openat() with the exec_path.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220927124357.688536-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If path is /proc/self/exe, use the executable path
provided by exec_path.
Don't use execfd as it is closed by loader_exec() and otherwise
will survive to the exec() syscall and be usable child process.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220927124357.688536-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In commit 80f0fe3a85 ("linux-user: Fix syscall parameter handling for
MIPS n32") the ABI problem regarding offset64 on MIPS n32 was fixed,
but still some cases remain where the n32 is incorrectly treated as any
other 32-bit ABI that passes 64-bit arguments in pairs of GPRs. Fix by
excluding TARGET_ABI_MIPSN32 from various TARGET_ABI_BITS == 32 checks.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1238
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Message-Id: <20221006085500.290341-1-xen0n@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously the 32-bit version was incorrectly chosen, leading to funny
but incorrect output from e.g. df(1). Simply select the version
corresponding to the 64-bit asm-generic definition.
For reference, this program should produce the same output no matter
natively compiled or not, for loongarch64 or not:
```c
#include <stdio.h>
#include <sys/statfs.h>
int main(int argc, const char *argv[])
{
struct statfs b;
if (statfs(argv[0], &b))
return 1;
printf("f_type = 0x%lx\n", b.f_type);
printf("f_bsize = %ld\n", b.f_bsize);
printf("f_blocks = %ld\n", b.f_blocks);
printf("f_bfree = %ld\n", b.f_bfree);
printf("f_bavail = %ld\n", b.f_bavail);
return 0;
}
// Example output on my amd64 box, with the test binary residing on a
// btrfs partition.
// Native and emulated output after the fix:
//
// f_type = 0x9123683e
// f_bsize = 4096
// f_blocks = 268435456
// f_bfree = 168406890
// f_bavail = 168355058
// Output before the fix, note the messed layout:
//
// f_type = 0x10009123683e
// f_bsize = 723302085239504896
// f_blocks = 168355058
// f_bfree = 2250817541779750912
// f_bavail = 1099229433104
```
Fixes: 1f63019632 ("linux-user: Add LoongArch syscall support")
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Song Gao <gaosong@loongson.cn>
Cc: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Message-Id: <20221006100710.427252-1-xen0n@gentoo.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add support for saving/restoring extended save states when signals
are delivered. This allows using AVX, MPX or PKRU registers in
signal handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux can use FXSAVE to save/restore XMM registers even on 32-bit
systems. This requires some care in order to keep the FXSAVE area
aligned to 16 bytes; for this reason, get_sigframe is changed to
pass the offset into the FXSAVE area rather than the full frame
size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent versions of Linux moved the 32-bit fpstate towards the end of the
frame, so that the variable-sized xsave data does not overwrite the
(ABI-defined) extramask[] field. Follow suit in QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
The value previously chosen overlaps GUSA_MASK.
Rename all DELAY_SLOT_* and GUSA_* defines to emphasize
that they are included in TB_FLAGs. Add aliases for the
FPSCR and SR bits that are included in TB_FLAGS, so that
we don't accidentally reassign those bits.
Fixes: 4da06fb306 ("target/sh4: Implement prctl_unalign_sigbus")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/856
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow syscall arguments to be interleaved between threads.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use a table for the names; print unknown values in hex,
since the value contains flags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220829021006.67305-7-richard.henderson@linaro.org>
[lv: update print_futex() according to
"linux-user: Show timespec on strace for futex()"]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The val argument to FUTEX_FD is a signal number. Convert to match
the host, as it will be converted back when the signal is delivered.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave only the argument adjustments within the shift,
and sink the actual syscall to the end. Sink the
timespec conversion as well, as there will be more users.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Pass a boolean to select between time32 and time64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Match most appropriate base platform string based on insn_flags.
Logic is aligned with aligned with set_isa() from
arch/mips/kernel/cpu-probe.c in Linux kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220803103009.95972-3-jiaxun.yang@flygoat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
AT_BASE_PLATFORM is a elf auxiliary vector pointing to a string
to pass some architecture information.
See getauxval(3) man-page.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220803103009.95972-2-jiaxun.yang@flygoat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel does this in fpregs_store() and fpregs_load(), so
qemu-user should do this as well.
Found by running valgrind's none/tests/s390x/test_sig.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220817123902.585623-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For handling guest POSIX timers, we currently use an array
g_posix_timers[], whose entries are a host timer_t value, or 0 for
"this slot is unused". When the guest calls the timer_create syscall
we look through the array for a slot containing 0, and use that for
the new timer.
This scheme assumes that host timer_t values can never be zero. This
is unfortunately not a valid assumption -- for some host libc
versions, timer_t values are simply indexes starting at 0. When
using this kind of host libc, the effect is that the first and second
timers end up sharing a slot, and so when the guest tries to operate
on the first timer it changes the second timer instead.
Rework the timer allocation code, so that:
* the 'slot in use' indication uses a separate array from the
host timer_t array
* we grab the free slot atomically, to avoid races when multiple
threads call timer_create simultaneously
* releasing an allocated slot is abstracted out into a new
free_host_timer_slot() function called in the correct places
This fixes:
* problems on hosts where timer_t 0 is valid
* the FIXME in next_free_host_timer() about locking
* bugs in the error paths in timer_create where we forgot to release
the slot we grabbed, or forgot to free the host timer
Reported-by: Jon Alduan <jon.alduan@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220725110035.1273441-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 66fb9763af ("basic signal handling")
Fixes: cf8b8bfc50 ("linux-user: add support for rt_tgsigqueueinfo() system call")
Signed-off-by: fanwenjie <fanwj@mail.ustc.edu.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We don't emulate a preemptive kernel on this level, and the hppa architecture
doesn't allow context switches on the gateway page. So we always have to return
to sc_iaoq[] and not to gr[31].
This fixes the remaining random segfaults which still occured.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-8-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa platform uses an upwards-growing stack and required in Linux
kernels < 5.18 an executable stack for signal processing. For that some
executables and libraries are marked to have an executable stack, for
which glibc uses the mprotect() syscall to mark the stack like this:
mprotect(xfa000000,4096,PROT_EXEC|PROT_READ|PROT_WRITE|PROT_GROWSUP).
Currently qemu will return -TARGET_EINVAL for this syscall because of the
checks in validate_prot_to_pageflags(), which doesn't allow the
PROT_GROWSUP or PROT_GROWSDOWN flags and thus triggers this error in the
guest:
error while loading shared libraries: libc.so.6: cannot enable executable stack as shared object requires: Invalid argument
Allow mprotect() to handle both flags and thus fix the guest.
The glibc tst-execstack testcase can be used to reproduce the issue.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-7-deller@gmx.de>
[lvivier: s/elif TARGET_HPPA/elif defined(TARGET_HPPA)/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa target requires a much bigger stack than many other targets,
and the Linux kernel allocates 80 MB by default for it.
This patch increases the guest stack for hppa to 80MB, and prevents
that this default stack size gets reduced by a lower stack limit on the
host.
Since the stack grows upwards on hppa, the stack_limit value marks the
upper boundary of the stack. Fix the output of /proc/self/maps (in the
guest) to show the [stack] marker on the correct memory area.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-6-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The stack-overflow check when building the "grep" debian package fails
on the debian hppa target. Reason is, that the guard page at the top
of the stack (which is added by qemu) prevents the fault handler in the
grep program to properly detect the stack overflow.
The Linux kernel on a physical machine doesn't install a guard page
either, so drop it and as such fix the build of "grep".
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-5-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In Linux kernel v5.18 the vDSO for signal trampoline was added.
This code mimiks the bare minimum of this vDSO and thus avoids that the
parisc emulation needs executable stacks.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-4-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The xtensa platform has a value of 0x10 for PROT_SEM.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220924114501.21767-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a follow-up for commit 892a4f6a75 ("linux-user: Add partial
support for MADV_DONTNEED"), which added passthrough for anonymous
mappings. File mappings can be handled in a similar manner.
In order to do that, mark pages, for which mmap() was passed through,
with PAGE_PASSTHROUGH, and then allow madvise() passthrough for these
pages. Drop the explicit PAGE_ANON check, since anonymous mappings are
expected to have PAGE_PASSTHROUGH anyway.
Add PAGE_PASSTHROUGH to PAGE_STICKY in order to keep it on mprotect().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220725125043.43048-1-iii@linux.ibm.com>
Message-Id: <20220906000839.1672934-5-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The default implementation has several problems: the first argument is
not displayed as a pointer, making it harder to grep; the third
argument is not symbolized; and there are several extra unused
arguments.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-4-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MADV_DONTNEED has a different value on alpha, compared to all the other
architectures. Fix by using TARGET_MADV_DONTNEED instead of
MADV_DONTNEED.
Fixes: 892a4f6a75 ("linux-user: Add partial support for MADV_DONTNEED")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-3-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Provide MADV_* definitions using target_mman.h header, similar to what
kernel does. Most architectures use the same values, with the exception
of alpha and hppa.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On the parisc architecture the stack grows upwards.
Move the TASK_UNMAPPED_BASE to high memory area as it's done by the
kernel on physical machines.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220918194555.83535-9-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If the mode parameter of chmod() is zero, this value isn't shown
when stracing a program:
chmod("filename",)
This patch fixes it up to show the zero-value as well:
chmod("filename",000)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220918194555.83535-8-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Enhance the hppa linux-user cpu_loop() to show more debugging info
on hard errors.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-6-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Enhance the EXCP_DUMP() macro to print out the failing program too.
During debugging it's sometimes hard to track down the actual failing
program if you are e.g. building a whole debian package.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220918194555.83535-5-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
I noticed those were missing when running the glib2.0 testsuite.
Add the syscalls including the strace output.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-4-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Allow linux-user to strace the clock_gettime64() syscall.
This syscall is used a lot on 32-bit guest architectures which use newer
glibc versions.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-3-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.
This patch introduces a smart way to generate and keep in sync the
host-to-guest and guest-to-host signal conversion tables for usage in
the qemu signal and strace code. This ensures that any signals
will now show up in both tables.
There is no functional change in this patch - with the exception that yet
missing signal names now show up in the strace code too.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Exactly the same as f17f4989fa before was
for readlink. I suppose this was simply missed at the time.
Signed-off-by: Jameson Nash <vtjnash@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220808190727.875155-1-vtjnash@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The new noexec test fails on s390x with "unexpected SEGV". This test
overwrites code using libc's memcpy(), which uses VSTL instruction.
host_signal_write() does not recognize it, which causes SEGV to be
incorrectly forwarded to the test.
Add all vector instructions that write to memory to
host_signal_write().
Fixes: ab12c95d3f ("target/s390x: Make translator stop before the end of a page")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220920113907.334144-1-iii@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'qemu64' CPU model implements the least featureful x86_64 CPU that's
possible. Historically this hasn't been an issue since it was rare for
OS distros to build with a higher mandatory CPU baseline.
With RHEL-9, however, the entire distro is built for the x86_64-v2 ABI
baseline:
https://developers.redhat.com/blog/2021/01/05/building-red-hat-enterprise-linux-9-for-the-x86-64-v2-microarchitecture-level
It is likely that other distros may take similar steps in the not too
distant future. For example, it has been suggested for Fedora on a
number of occasions.
This new baseline is not compatible with the qemu64 CPU model though.
While it is possible to pass a '-cpu xxx' flag to qemu-x86_64, the
usage of QEMU doesn't always allow for this. For example, the args
are typically controlled via binfmt rules that the user has no ability
to change. This impacts users who are trying to use podman on aarch64
platforms, to run containers with x86_64 content. There's no arg to
podman that can be used to change the qemu-x86_64 args, and a non-root
user of podman can not change binfmt rules without elevating privileges:
https://github.com/containers/podman/issues/15456#issuecomment-1228210973
Changing to the 'max' CPU model gives 'qemu-x86_64' maximum
compatibility with binaries it is likely to encounter in the wild,
and not likely to have a significant downside for existing usage.
Most other architectures already use an 'any' CPU model, which is
often mapped to 'max' (or similar) already, rather than the oldest
possible CPU model.
For the sake of consistency the 'i386' architecture is also changed
from using 'qemu32' to 'max'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220923110413.70593-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently it's possible to execute pages that do not have PAGE_EXEC
if there is an existing translation block. Fix by invalidating TBs
that touch the affected pages.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220817150506.592862-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Map the stack executable if required by default or on demand.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means that we've
got to mark the vsyscall page executable. We had been special
casing this entirely within translate.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means that we've
got to mark page zero executable. We had been special casing this
entirely within translate.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means
that we've got to mark the commpage executable. We had
been placing the commpage outside of reserved_va, which
was incorrect and lead to an abort.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This reverts commit 52f0c16076.
This caused a regression in arm/aarch64.
We are hard-coding ARMCPRegInfo pointers into TranslationBlocks,
for calling into helper_{get,set}cp_reg{,64}. So we have a race
condition between whichever cpu thread translates the code first
(encoding the pointer), and that cpu thread exiting, so that the
next execution of the TB references a freed data structure.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While forcing the CPU to unrealize by hand does trigger the clean-up
code we never fully free resources because refcount never reaches
zero. This is because QOM automatically added objects without an
explicit parent to /unattached/, incrementing the refcount.
Instead of manually triggering unrealization just unparent the object
and let the device machinery deal with that for us.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/866
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220811151413.3350684-2-alex.bennee@linaro.org>
aarch64 stores MTE tags in target_date, and they should be reset by
MADV_DONTNEED.
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220711220028.2467290-1-vitalybuka@google.com>
[lv: fix code style issues]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The latest glibc 2.36 has extended sys/mount.h so that it
defines the FSCONFIG_* enum constants. These are historically
defined in linux/mount.h, and thus if you include both headers
the compiler complains:
In file included from /usr/include/linux/fs.h:19,
from ../linux-user/syscall.c:98:
/usr/include/linux/mount.h:95:6: error: redeclaration of 'enum fsconfig_command'
95 | enum fsconfig_command {
| ^~~~~~~~~~~~~~~~
In file included from ../linux-user/syscall.c:31:
/usr/include/sys/mount.h:189:6: note: originally defined here
189 | enum fsconfig_command
| ^~~~~~~~~~~~~~~~
/usr/include/linux/mount.h:96:9: error: redeclaration of enumerator 'FSCONFIG_SET_FLAG'
96 | FSCONFIG_SET_FLAG = 0, /* Set parameter, supplying no value */
| ^~~~~~~~~~~~~~~~~
/usr/include/sys/mount.h:191:3: note: previous definition of 'FSCONFIG_SET_FLAG' with type 'enum fsconfig_command'
191 | FSCONFIG_SET_FLAG = 0, /* Set parameter, supplying no value */
| ^~~~~~~~~~~~~~~~~
...snip...
QEMU doesn't include linux/mount.h, but it does use
linux/fs.h and thus gets linux/mount.h indirectly.
glibc acknowledges this problem but does not appear to
be intending to fix it in the forseeable future, simply
documenting it as a known incompatibility with no
workaround:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3Ehttps://sourceware.org/glibc/wiki/Synchronizing_Headers
To address this requires either removing use of sys/mount.h
or linux/fs.h, despite QEMU needing declarations from
both.
This patch removes linux/fs.h, meaning we have to define
various FS_IOC constants that are now unavailable.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20220802164134.1851910-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GDB LoongArch fpu use fcc register, update gdb_set_fpu()
and gdb_get_fpu() to match it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220805033523.1416837-6-gaosong@loongson.cn>
For certain paths in /proc, the open syscall is intercepted and the
returned file descriptor points to a temporary file with emulated
contents.
If TMPDIR is not accessible or writable for the current user (for
example in a read-only mounted chroot or container) tools such as ps
from procps may fail unexpectedly. Trying to read one of these paths
such as /proc/self/stat would return an error such as ENOENT or EROFS.
To relax the requirement on a writable TMPDIR, use memfd_create()
instead to create an anonymous file and return its file descriptor.
Signed-off-by: Rainer Müller <raimue@codingfarm.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220729154951.76268-1-raimue@codingfarm.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Follow the kernel's alignment, as we already noted.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1093
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220729201942.30738-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The flatload loader sets the end_code field in the image_info struct
incorrectly, due to a typo.
This is a very long-standing bug (dating all the way back to when
the bFLT loader was added in 2006), but has gone unnoticed because
(a) most people don't use bFLT binaries
(b) we don't actually do anything with the end_code field, except
print it in debugging traces and pass it to TCG plugins
Fix the typo.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1119
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220728151406.2262862-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When writing back the fd[1] pipe file handle to emulated userspace
memory, use sizeof(abi_int) as offset insted of the hosts's int type.
There is no functional change in this patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <YtQ3Id6z8slpVr7r@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The pipe2() syscall is available on all Linux platforms since kernel
2.6.27, so use it unconditionally to emulate pipe() and pipe2().
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <YtbZ2ojisTnzxN9Y@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This program:
int main(void) { asm("bv %r0(%r0)"); return 0; }
produces on real hppa hardware the expected segfault:
SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x3} ---
killed by SIGSEGV +++
Segmentation fault
But when run on linux-user you get instead internal qemu errors:
ERROR: linux-user/hppa/cpu_loop.c:172:cpu_loop: code should not be reached
Bail out! ERROR: linux-user/hppa/cpu_loop.c:172:cpu_loop: code should not be reached
ERROR: accel/tcg/cpu-exec.c:933:cpu_exec: assertion failed: (cpu == current_cpu)
Bail out! ERROR: accel/tcg/cpu-exec.c:933:cpu_exec: assertion failed: (cpu == current_cpu)
Fix it by adding the missing case for the EXCP_IMP trap in
cpu_loop() and raise a segfault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <YtWNC56seiV6VenA@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These prctl set the Streaming SVE vector length, which may
be completely different from the Normal SVE vector length.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "sve" to the sve prctl functions, to distinguish
them from the coming "sme" prctls with similar names.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set the SM bit in the SVE record on signal delivery, create the ZA record.
Restore SM and ZA state according to the records present on return.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the checks out of the parsing loop and into the
restore function. This more closely mirrors the code
structure in the kernel, and is slightly clearer.
Reject rather than silently skip incorrect VL and SVE record sizes,
bringing our checks in to line with those the kernel does.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-39-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In parse_user_sigframe, the kernel rejects duplicate sve records,
or records that are smaller than the header. We were silently
allowing these cases to pass, dropping the record.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fold the return value setting into the goto, so each
point of failure need not do both.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make sure to zero the currently reserved fields.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220624031049.1716097-6-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220624031049.1716097-5-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220624031049.1716097-4-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220624031049.1716097-3-gaosong@loongson.cn>
[rth: Rework extctx frame allocation and locking;
Properly read/write fcc from signal frame.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we had a call to do_m68k_semihosting in linux-user, it
wasn't actually reachable. We don't include DISAS_INSN(halt)
as an instruction unless system mode.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function has been replaced by *_write.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function has been replaced by *_write.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For arm-compat, initialize console_{in,out}_gf;
otherwise, initialize stdio file descriptors.
This will go some way to cleaning up arm-compat, and
will allow other semihosting to use normal stdio.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Will replace qemu_semihosting_console_{outs,outc},
but we need more plumbing first.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow more than one character to be read at one time.
Will be used by m68k and nios2 semihosting for stdio.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't need CPUArchState, and we do want the CPUState of the
thread performing the operation -- use this instead of current_cpu.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform the cleanup in the FIXME comment in common_semi_gdb_syscall.
Do not modify guest registers until the syscall is complete,
which in the gdbstub case is asynchronous.
In the synchronous non-gdbstub case, use common_semi_set_ret
to set the result. Merge set_swi_errno into common_semi_cb.
Rely on the latter for combined return value / errno setting.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Keep track of the new child tidptr given by a set_tid_address() syscall.
Do not call the host set_tid_address() syscall because we are emulating
the behaviour of writing to child_tidptr in the exit() path.
Signed-off-by: Helge Deller<deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <YpH+2sw1PCRqx/te@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We had been using the i686 platform string for x86_64.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1041
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220603213801.64738-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add an interface function to extract the digested vector length
rather than the raw zcr_el[1] value. This fixes an incorrect
return from do_prctl_set_vl where we didn't take into account
the set of vector lengths supported by the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220607203306.657998-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Errors are not all negative numbers: use is_error.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Trace (and others) is
supposed to record the next insn in PC and the address
of the trapping instruction in ADDRESS.
Create gen_raise_exception_format2 to record the trapping
pc in env->mmu.ar. Update m68k_interrupt_all to pass the
value to do_stack_frame. Update cpu_loop to handle EXCP_TRACE.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Zero Div (and others)
is supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
While the N, Z and V flags are documented to be undefine on DIV0,
the C flag is documented as always cleared.
Update helper_div* to take the instruction length as an argument
and use raise_exception_format2. Hoist the reset of the C flag
above the division by zero check.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), CHK, CHK2 (and others)
are supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
Create a raise_exception_format2 function to centralize recording
of the trapping pc in mmu.ar, plus advancing to the next insn.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These are raised by guest instructions, and should not
fall through into the default abort case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than adjust the PC in all of the consumers, raise
the exception with the correct PC in the first place.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These are new hwcap bits added for power10.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524140537.27451-9-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
clang-built s390x branch-relative-long test fails on clang-built s390x
QEMU due to the following sequence of events:
- The test zeroes out a code page, clang generates exrl+xc for this.
- do_helper_xc() is called. Clang generates exrl+xc there as well.
- Since there already exists a TB for the code in question, its page is
read-only and SIGSEGV is raised.
- host_signal_handler() calls host_signal_write() and the latter does
not recognize exrl as a write. Therefore page_unprotect() is not
called and the signal is forwarded to the test.
Fix by treating EXRL (and EX, just in case) as writes. There may be
false positives, but they will lead only to an extra page_unprotect()
call.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504114819.1729737-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 31330e6cec ("linux-user/s390x: Implement setup_sigtramp")
removed an unused field from rt_sigframe, disturbing offsets of other
fields and breaking unwinding from signal handlers (e.g. libgcc's
s390_fallback_frame() relies on this struct having a specific layout).
Restore the field and add a comment.
Reported-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Fixes: 31330e6cec ("linux-user/s390x: Implement setup_sigtramp")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220503225157.1696774-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
fill_thread_info() takes a pointer to const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220509205728.51912-2-philippe.mathieu.daude@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
RLIMIT_RTTIME is not provided by uclibc-ng or by musl prior to version
1.2.0 and
2507e7f531
resulting in the following build failure since
https://git.qemu.org/?p=qemu.git;a=commit;h=244fd08323088db73590ff2317dfe86f810b51d7:
../linux-user/syscall.c: In function 'target_to_host_resource':
../linux-user/syscall.c:1057:16: error: 'RLIMIT_RTTIME' undeclared (first use in this function); did you mean 'RLIMIT_NOFILE'?
1057 | return RLIMIT_RTTIME;
| ^~~~~~~~~~~~~
| RLIMIT_NOFILE
Fixes:
- http://autobuild.buildroot.org/results/22d3b584b704613d030e1ea9e6b709b713e4cc26
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220523105239.1499162-1-fontaine.fabrice@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We had two sets of variables: arg_start/arg_end, and
arg_strings/env_strings. In linuxload.c, we set the
first pair to the bounds of the argv strings, but in
elfload.c, we set the first pair to the bounds of the
argv pointers and the second pair to the bounds of
the argv strings.
Remove arg_start/arg_end, replacing them with the standard
argc/argv/envc/envp values. Retain arg_strings/env_strings
with the meaning we were using in elfload.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/714
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220427025129.160184-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We missed out on a couple of exception types that may
legitimately be raised by a userland program.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-59-richard.henderson@linaro.org>
The exception return address for nios2 is the instruction
after the one that was executing at the time of the exception.
We have so far implemented this by advancing the pc during the
process of raising the exception. It is perhaps a little less
confusing to do this advance in the translator (and helpers)
when raising the exception in the first place, so that we may
more closely match kernel sources.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-58-richard.henderson@linaro.org>
Indirect branches, plus eret and bret optionally raise
an exception when branching to a misaligned address.
The exception is required when an mmu is enabled, but
enable it always because the fallback behaviour is not
documented (though presumably it discards low bits).
For the purposes of the linux-user cpu loop, if EXCP_UNALIGN
(misaligned data) were to arrive, it would be treated the
same as EXCP_UNALIGND (misaligned destination). See the
!defined(CONFIG_NIOS2_ALIGNMENT_TRAP) block in kernel/traps.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-53-richard.henderson@linaro.org>
Division may (optionally) raise a division exception.
Since the linux kernel has been prepared for this for
some time, enable it by default.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-42-richard.henderson@linaro.org>
Drop the set of estatus in init_thread; it was clearly intended
to be setting the value of CR_STATUS for the application, but we
never actually performed that copy. However, the proper value is
set in nios2_cpu_reset so we don't need to do anything here.
We only initialize SP and EA in init_thread, there's no value in
copying other uninitialized data into ENV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-21-richard.henderson@linaro.org>
It is cleaner to have a separate name for this variable.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-17-richard.henderson@linaro.org>
Use the simpler signal interface, which forces us to supply
the missing PC value to si_addr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-13-richard.henderson@linaro.org>
Since f5ef0e518d, we have a real page mapped for kuser,
which means the special casing for SIGSEGV can go away.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-11-richard.henderson@linaro.org>
Drop the kernel-specific "pr2" code structure and use
the qemu-specific error return value.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-8-richard.henderson@linaro.org>
There is no sigreturn syscall, only rt_sigreturn.
This function is unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-7-richard.henderson@linaro.org>
Honor QEMU_ESIGRETURN and QEMU_ERESTARTSYS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-6-richard.henderson@linaro.org>
Follow the kernel assembly, which considers all negative
return values to be errors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-5-richard.henderson@linaro.org>
Syscall 0 is __NR_io_setup for this target; there is nothing
to work around.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: a0a839b65b ("nios2: Add usermode binaries emulation")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-4-richard.henderson@linaro.org>
The child side of clone needs to set the secondary
syscall return value, r7, to indicate syscall success.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-3-richard.henderson@linaro.org>
Note that this advance *should* be done by the translator, as
that's the pc value that's supposed to be generated by hardware.
However, that's a much larger change across sysemu as well.
In the meantime, produce the correct PC for any signals raised
by the trap instruction. Note the special case of TRAP_BRKPT,
which itself is special cased within the kernel.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-2-richard.henderson@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform all logfile setup in one step.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-30-richard.henderson@linaro.org>
We have extra stuff to log at the same time.
Hoist the qemu_log_lock/unlock to the caller and use fprintf.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-23-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
This buffering was introduced during the Paleozoic: 9fa3e85353.
There has never been an explanation as to why we may not allow
glibc to allocate the file buffer itself. We certainly have
many other uses of mmap and malloc during user-only startup,
so presumably whatever the issue was, it has been fixed during
the preceeding 18 years.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-2-richard.henderson@linaro.org>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity warns that we shift a 32-bit value by N, and then
accumulate it into a 64-bit type (target_ulong on ppc64).
The ccr is always 8 * 4-bit fields, and thus is always a
32-bit quantity; narrow the type to avoid the warning.
Fixes: Coverity CID 1487223
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401191643.330393-1-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Seen while compiling on Alpine:
In file included from ../linux-user/strace.c:17:
In file included from ../linux-user/qemu.h:11:
In file included from ../linux-user/syscall_defs.h:1247:
../linux-user/sh4/termbits.h:276:10: warning: 'TIOCSER_TEMT' macro redefined
[-Wmacro-redefined]
# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
^
/usr/include/sys/ioctl.h:50:9: note: previous definition is here
#define TIOCSER_TEMT 1
^
1 warning generated.
Add the TARGET_ prefix here, too, like we do it on the other architectures.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20220330134302.979686-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If CONFIG_ATOMIC64, we can use a host cmpxchg and provide
atomicity across processes; otherwise we have no choice but
to continue using start/end_exclusive.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323005839.94327-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The existing implementation using start/end_exclusive
does not provide atomicity across processes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323005839.94327-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This fallback syscall was stubbed out.
It would only matter for emulating pre-armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323005839.94327-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Unblocked signals are never delivered, because we
didn't record the new mask for process_pending_signals.
Handle this with the same mechanism as sigsuspend.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220315084308.433109-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Unblocked signals are never delivered, because we
didn't record the new mask for process_pending_signals.
Handle this with the same mechanism as sigsuspend.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220315084308.433109-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Unblocked signals are never delivered, because we
didn't record the new mask for process_pending_signals.
Handle this with the same mechanism as sigsuspend.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/834
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220315084308.433109-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Two new functions: process_sigsuspend_mask and finish_sigsuspend_mask.
Move the size check and copy-from-user code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220315084308.433109-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On alpha, the sigset argument for sigsuspend is in a register.
When we drop that into memory that happens in host-endianness,
but target_to_host_old_sigset will treat it as target-endianness.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220315084308.433109-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MIPS n32 ABI is basically n64 with the address space (i.e. pointer
width) shrinked to 32 bits. Meanwhile the current code treats it as
o32-like based on TARGET_ABI_BITS, which causes problems with n32
syscalls utilizing 64-bit offsets, like pread64, affecting most (if not
all) recently built n32 binaries.
This partially solves issue #909 ("qemu-mipsn32(el) user mode emulator
fails to execute any recently built n32 binaries"); with this change
applied, the built qemu-mipsn32el is able to progress beyond the
pread64, and finish _dl_start_user for the "getting ld.so load libc.so"
case. The program later dies with SIGBUS, though, due to _dl_start_user
not maintaining stack alignment after removing ld.so itself from argv,
and qemu-user starting to enforce alignment recently, but that is
orthogonal to the issue here; the more common case of chrooting is
working, verified with my own-built Gentoo n32 sysroot. (Depending on
the exact ISA used, one may have to explicitly specify QEMU_CPU, which
is the case for my chroot.)
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/909
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220320052259.1610883-1-xen0n@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Remove pt_regs indirection and instead reference gp_regs directly, this
makes it portable across musl/glibc
Use PT_* constants defined in asm/ptrace.h
Move the file to ppc64 subdir and leave ppc empty
Fixes
../qemu-6.2.0/linux-user/host/ppc64/../ppc/host-signal.h:16:32: error: incomplete definition of type 'struct pt_regs'
return uc->uc_mcontext.regs->nip;
~~~~~~~~~~~~~~~~~~~~^
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220315015740.847370-1-raj.khem@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Handle POWERPC_EXCP_TRAP in cpu_loop to deliver SIGTRAP on tw[i]/td[i].
The si_code comes from do_program_check in the kernel source file
arch/powerpc/kernel/traps.c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220113170456.1796911-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In linux-user/signal.c we have two FIXME comments claiming that
parts of the signal-handling code are not threadsafe. These are
very old, as they were first introduced in commit 624f797905
in 2008. Since then we've radically overhauled the signal-handling
logic, while carefully preserving these FIXME comments.
It's unclear exactly what thread-safety issue the original
author was trying to point out -- the relevant data structures
are in the TaskStruct, which makes them per-thread and only
operated on by that thread. The old code at the time of that
commit did have various races involving signal handlers being
invoked at awkward times; possibly this was what was meant.
Delete these FIXME comments:
* they were written at a time when the way we handled
signals was completely different
* the code today appears to us to not have thread-safety issues
* nobody knows what the problem the comments were trying to
point out was
so they are serving no useful purpose for us today.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220114155032.3767771-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmIFu3QdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9tHwf+KFk9Pa9M+vhnHTZJ
ZvIRs9BaSzoDYqxLlHSKmXN3w3G5PbIcbHVHXTty2o28bT0jk05T9zQn3TzMfcbl
O+Yx8rygUJmbzlEQ+GaSI69pppFj8ahlS/ylfwd5MABZun2mawexEU9sqXqGCKR9
kJY8IpkZ6vqEDONcS1ZMQ+HFsNvw6LYBd567SY8g9ZsyPLWtQSqwdcuPqAJDFWCv
zNe6b07IRoFVOsbtQix9Dl/ntMxk5jto+UvdEVuW2FJOeRZJRshLWF5cGHNavSgQ
Culb5ALOzoxSlcZ4xfVfWtBGoFr/BNu9D0omTSmbosvXAd4HmPVxD6kV17wXV3+g
G/cvew==
=D+x7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220211' into staging
Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
# gpg: Signature made Fri 11 Feb 2022 01:27:16 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20220211: (34 commits)
tests/tcg/multiarch: Add sigbus.c
tcg/sparc: Support unaligned access for user-only
tcg/sparc: Add tcg_out_jmpl_const for better tail calls
tcg/sparc: Use the constant pool for 64-bit constants
tcg/sparc: Convert patch_reloc to return bool
tcg/sparc: Improve code gen for shifted 32-bit constants
tcg/sparc: Add scratch argument to tcg_out_movi_int
tcg/sparc: Split out tcg_out_movi_imm32
tcg/sparc: Use tcg_out_movi_imm13 in tcg_out_addsub2_i64
tcg/mips: Support unaligned access for softmmu
tcg/mips: Support unaligned access for user-only
tcg/arm: Support raising sigbus for user-only
tcg/arm: Reserve a register for guest_base
tcg/arm: Support unaligned access for softmmu
tcg/arm: Check alignment for ldrd and strd
tcg/arm: Remove use_armv6_instructions
tcg/arm: Remove use_armv5t_instructions
tcg/arm: Drop support for armv4 and armv5 hosts
tcg/loongarch64: Support raising sigbus for user-only
tcg/tci: Support raising sigbus for user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
The PowerPC 601 processor is the first generation of processors to
implement the PowerPC architecture. It was designed as a bridge
processor and also could execute most of the instructions of the
previous POWER architecture. It was found on the first Macs and IBM
RS/6000 workstations.
There is not much interest in keeping the CPU model of this
POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of
the 60x family which implement the complete PowerPC instruction set.
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203142756.1302515-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Sparc64 is unique on linux in *not* passing ucontext_t as
the third argument to a SA_SIGINFO handler. It passes the
old struct sigcontext instead.
Set both pc and npc in host_signal_set_pc.
Fixes: 8b5bd46193 ("linux-user/host/sparc: Populate host_signal.h")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not support sparc32 as a host, so there's no point in
sparc64 redirecting to sparc.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not directly access ucontext_t as the third signal parameter.
This is preparation for a sparc64 fix.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not directly access the uc_sigmask member.
This is preparation for a sparc64 fix.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linux kernel does it this way (checks read permission before validating `how`)
and the latest version of ABSL's `AddressIsReadable()` depends on this
behavior.
c.f. 9539ba4308/kernel/signal.c (L3147)
Reviewed-by: Patrick Venture <venture@google.com>
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Patrick Venture <venture@google.com>
Message-Id: <20220126212559.1936290-2-venture@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The inotify implementation originally called the raw host syscalls.
Commit 3b3f24add0 changed this to use the glibc wrappers. However ifdefs
in syscall.c still test for presence of the raw syscalls.
This causes a problem on e.g. aarch64 hosts which never had the
inotify_init syscall - it had been obsoleted by inotify_init1 before
aarch64 was invented! However it does have a perfectly good glibc
implementation of inotify_wait.
Fix this by removing all the raw __NR_inotify_* tests, and instead check
CONFIG_INOTIFY, which already tests for the glibc functionality we use.
Also remove the now-pointless sys_inotify* wrappers.
Tested using x86-64 inotifywatch on aarch64 host, and vice-versa
Signed-off-by: Paul Brook <paul@nowt.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220126202636.655289-1-paul@nowt.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Alpha uses different values of some TARGET_RLIMIT_* constants, which were
missing and caused bugs like #577, fixed thus. Also rearranged all three
(alpha, mips and sparc) that differ from everyone else for clarity.
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/577
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <87y236lpwb.fsf@depni.sinp.msu.ru>
[lv: replace tabs by spaces]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The linux-user struct TaskState has an 'aligned(16)' attribute. When
the struct was first added in commit 851e67a1b4 in 2003, there was
a justification in a comment (still present in the source today):
/* NOTE: we force a big alignment so that the stack stored after is
aligned too */
because the final field in the struct was "uint8_t stack[0];"
But that field was removed in commit 48e15fc2d in 2010 which
switched us to allocating the stack and the TaskState separately.
Because we allocate the structure with g_new0() rather than as
a local variable, the attribute made no difference to the alignment
of the structure anyway.
Remove the unnecessary attribute, and the corresponding comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220114153732.3767229-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmHm7y4ACgkQ+9DbCVqe
KkSsDwgAgWiOUtnPxNnZ3PuLQpIDCGSotjshCXo9PhPu/SWedvMfTftPU+g3wxbl
+A2GZcNnVPaOrJo7hfDtOtir9UJUFTmyv8KtPhUYmtxxiv3HWM1RvgrBQnMEvo5A
GFAq6jSFclH4HTSxz4FHbEl0TM3feQbSfbMWI6Q1Q+aPm8hWSzhClIqBCwsJJdm8
hi76BE9o94BtvA6Qv2CoPvGsOzpV0X0VXaljf1W927BzJu+b0wEGwIm61+eovNsh
DS2kDZk+PpiYeRN/oC40Z6ozR/Lf/jZ/87AnN3gV/yLDwa5cafA+GtmcKMx1IJIc
BVm0bJo+KzHfYiVjYTJhsU7C2W71PA==
=uBQq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-7.0-180122-2' into staging
Various testing and other misc updates:
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
# gpg: Signature made Tue 18 Jan 2022 16:47:42 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-7.0-180122-2: (31 commits)
docker: include bison in debian-tricore-cross
FreeBSD: Upgrade to 12.3 release
test/tcg/ppc64le: Add float reference files
tests/tcg/multiarch: Read fp flags before printf
linux-user: don't adjust base of found hole
linux-user/elfload: add extra logging for hole finding
linux-user: expand reserved brk space for 64bit guests
docs/devel: more documentation on the use of suffixes
docs/devel: update C standard to C11
monitor: move x-query-profile into accel/tcg to fix build
hw/arm: add control knob to disable kaslr_seed via DTB
tests/docker: add libfuse3 development headers
tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX
tests/docker: auto-generate alpine.docker with lcitool
tests/docker: fully expand the alpine package list
tests/docker: fix sorting of alpine image package lists
tests/docker: updates to alpine package list
.gitlab-ci.d/cirrus: auto-generate variables with lcitool
tests/docker: remove ubuntu.docker container
tests/docker: auto-generate opensuse-leap.docker with lcitool
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pgb_find_hole function goes to the trouble of taking account of
both mmap_min_addr and any offset we've applied to decide the starting
address of a potential hole. This is especially important for
emulating 32bit ARM in a 32bit build as we have applied the offset to
ensure there will be space to map the ARM_COMMPAGE bellow the main
guest map (using wrapped arithmetic).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/690
Message-Id: <20220105135009.1584676-27-alex.bennee@linaro.org>
The various approaches to finding memory holes are quite complicated
to follow especially at a distance. Improve the logging so we can see
exactly what method found the space for the guest memory.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220105135009.1584676-26-alex.bennee@linaro.org>
A recent change to fix commpage allocation issues on 32bit hosts
revealed another intermittent issue on s390x. The root cause was the
headroom we give for the brk space wasn't enough causing the guest to
attempt to map something on top of QEMUs own pages. We do not
currently do anything to protect from this (see #555).
By inspection the brk mmap moves around and top of the address range
has been measured as far as 19Mb away from the top of the binary. As
we chose a smallish number to keep 32bit on 32 bit feasible we only
increase the gap for 64 bit guests. This does mean that 64-on-32
static binaries are more likely to fail to find a hole in the address
space but that is hopefully a fairly rare situation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220113165550.4184455-1-alex.bennee@linaro.org>
It's been unused for 7 years since 907f5fddaa when linux-user stopped
queueing any signals.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220116204423.16133-2-imp@bsdimp.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The linux-user queue_signal() function always returns 1, and none of
its callers check the return value. Give it a void return type
instead.
The return value is a leftover from the old pre-2016 linux-user
signal handling code, which really did have a queue of signals and so
might return a failure indication if too many signals were queued at
once. The current design avoids having to ever have more than one
signal queued via queue_signal() at once, so it can never fail.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220114153732.3767229-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In commit c599d4d6d6 in 2016 we renamed the old force_sig()
function to dump_core_and_abort(), but we forgot to rename the
associated tracepoint. Rename the tracepoint to to match the
function it's called from.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220114153732.3767229-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a typo in a comment in the arm cpu_loop code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220114182535.3804783-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* KVM_GET/SET_SREGS2 support for x86
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHe0v8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPPgQf/Usiph4SA/MjpqwmLP8ZL64ghWzUm
ZjZRRDC12cApBE/P7/TdzHGwx6IiRu2hWt3wVLFWWEpN7xNwoelrhgLZcr8Dl80P
1b2Pe/BHe1xXI+xC/BgK4qt8sxhSvb9hdFwgz2J4mPSgN64d0sXszm/r56rJ/PXq
T2/M/o6wyFexPhYMQcN/ssQIeQzL8uXTifd7GqpcfRM4iivW1KAFVv9zr+SWqE+7
QavIoRTpBiAb7r0EtuxLrPdgiqkx0OKXE93mwrjM0Anci33hdVHLqe8Zs4gmRzyM
sLqArJwG/kdy2fL8Pc3ncPOxKsBgXDIqfucAJ8Tong1hwLJXiyZnJTxMSg==
=Q2aI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson cleanups
* KVM_GET/SET_SREGS2 support for x86
# gpg: Signature made Wed 12 Jan 2022 13:09:19 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
meson: reenable filemonitor-inotify compilation
meson: build all modules by default
configure: do not create roms/seabios/config.mak if SeaBIOS not present
tests/tcg: Fix target-specific Makefile variables path for user-mode
KVM: x86: ignore interrupt_bitmap field of KVM_GET/SET_SREGS
KVM: use KVM_{GET|SET}_SREGS2 when supported.
meson: add comments in the target-specific flags section
configure, meson: move config-poison.h to meson
meson: build contrib/ executables after generated headers
configure: move non-command-line variables away from command-line parsing section
configure: parse --enable/--disable-strip automatically, flip default
configure, makefile: remove traces of really old files
configure: do not set bsd_user/linux_user early
configure: simplify creation of plugin symbol list
block/file-posix: Simplify the XFS_IOC_DIOINFO handling
meson: cleanup common-user/ build
user: move common-user includes to a subdirectory of {bsd,linux}-user/
meson: reuse common_user_inc when building files specific to user-mode emulators
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid polluting the compilation of common-user/ with local include files;
making an include file available to common-user/ should be a deliberate
decision in order to keep a clear interface that can be used by both
bsd-user/ and linux-user/.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The clang in Ubuntu 18.04 (10.0.0-4ubuntu1) produces a warning
on the code added in commit f5ef0e518d where we use a
shifted expression in a boolean context:
../../linux-user/elfload.c:2423:16: error: converting the result of '<<' to a boolean always evaluates to true [-Werror,-Wtautological-constant-compare]
} else if (LO_COMMPAGE) {
^
../../linux-user/elfload.c:1102:22: note: expanded from macro 'LO_COMMPAGE'
#define LO_COMMPAGE TARGET_PAGE_SIZE
^
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/cpu-all.h:231:31: note: expanded from macro 'TARGET_PAGE_SIZE'
#define TARGET_PAGE_SIZE (1 << TARGET_PAGE_BITS)
^
1 error generated.
The warning is bogus because whether LO_COMMPAGE is zero or not
depends on compile-time ifdefs; shut the compiler up by adding
an explicit comparison to zero.
Fixes: f5ef0e518d ("linux-user/nios2: Map a real kuser page")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20220111082900.3341274-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is PR_CAPBSET_READ, PR_CAPBSET_DROP and the "legacy"
PR_CAP_AMBIENT PR_GET_SECUREBITS, PR_SET_SECUREBITS.
All of these arguments are integer values only, and do not
require mapping of values between host and guest.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the host signal number to guest signal number
before returning the value to the guest.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220106225738.103012-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The kernel does not special-case arg2 != NULL, so
neither should we.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Place it next to copy_from/to_user_oabi_flock64, the only users,
inside the existing target-specific ifdef. This leaves only
generic ipc structs in target_structs.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220107042600.149852-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-25-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-24-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-23-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fix missing PC from EXCP_DEBUG by
merging the case with EXCP_BREAKPOINT.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-21-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
The fault address for POWERPC_EXCP_ISI is nip exactly, not nip - 4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-19-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and SIGFPE; use force_sig (SI_KERNEL) for EXCP_DSPDIS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename to do_tr_or_bp, as per the kernel function.
Add a 'trap' argument, akin to the kernel's si_code, but clearer.
The return value is always 0, so change the return value to void.
Use force_sig and force_sig_fault.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a typo for ESR_EC_DIVZERO, which is integral not floating-point.
Fix the if ladder for decoding floating-point exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Replace the local gen_signal with the generic functions that match
how the kernel raises signals. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reduce the number of ifdefs within cpu_loop().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This si_code was changed in 75abf64287cab, for linux 4.17.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This define is unused, and we have no similar define for
the other signal sub-codes.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These si_codes have been properly set by the kernel since the beginning.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and missing si_code for SIGBUS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This si_code was changed in 4cc13e4f6d441, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These si_codes were changed in 535906c684fca, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
add IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT and IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
# QEMU_LOG=unimp ip a
Unknown QEMU_IFLA_BRPORT type 37
Unknown QEMU_IFLA_BRPORT type 38
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211219154514.2165728-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use g_try_malloc instead of malloc to alocate the target ifconfig.
Also replace the corresponding free with g_free.
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20220104143841.25116-1-email@aabouzied.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using do_sigprocmask directly was incorrect, as it will
leave the signal blocked by the outer layers of linux-user.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Do not cast the signal mask elements; trust __put_user.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The real kernel will talk about the user PC as EA,
because that's where the hardware will have copied it,
and where it expects to put it to then use ERET.
But qemu does not emulate all of the exception stuff
while emulating user-only. Manipulate PC directly.
This fixes signal entry and return, and eliminates
some slight confusion from target_cpu_copy_regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The first word of page1 is data, so the whole thing
can't be implemented with emulation of addresses.
Use init_guest_commpage for the allocation.
Hijack trap number 16 to implement cmpxchg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Arm will no longer be the only target requiring a commpage,
but it will continue to be the only target placing the page
at the high end of the address space.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Do not confuse host and guest addresses. Lock and unlock
the target_rt_sigframe structure in setup_rt_sigframe.
Since rt_setup_ucontext always returns 0, drop the return
value entirely. This eliminates the only write to the err
variable in setup_rt_sigframe.
Always copy the siginfo structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The real kernel has to load the instruction and extract
the imm5 field; for qemu, modify the translator to do this.
The use of R_AT for this in cpu_loop was a bug. Handle
the other trap numbers as per the kernel's trap_table.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The possible variants for region type in /proc/self/maps are either
private "p" or shared "s". In the current implementation,
we mark shared regions as "-". It could break memory mapping parsers
such as included into ASan/HWASan sanitizers.
Fixes: 01ef6b9e4e ("linux-user: factor out reading of /proc/self/maps")
Signed-off-by: Andrey Kazmin <a.kazmin@partner.samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211227125048.22610-1-a.kazmin@partner.samsung.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There seems to be difference in syscall and libc definition of these
methods and therefore musl does not implement them (1e21e78bf7). Call
syscall directly to ensure the behavior of the libc of user application,
not the libc that was used to build QEMU.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Message-Id: <20220105041819.24160-3-tonistiigi@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These syscalls are not exposed by glibc. The struct type need to be
redefined as it can't be included directly before
https://lkml.org/lkml/2020/5/28/810 .
sched_attr type can grow in future kernel versions. When client sends
values that QEMU does not understand it will return E2BIG with same
semantics as old kernel would so client can retry with smaller inputs.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Message-Id: <20220105041819.24160-2-tonistiigi@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When converting a siginfo_t from waitid(), the interpretation of si_status
depends on the value of si_code: For CLD_EXITED, it is an exit code and
should be copied verbatim. For other codes, it is a signal number
(possibly with additional high bits from ptrace) that should be mapped.
This code was previously changed in commit 1c3dfb506e
("linux-user/signal: Decode waitid si_code"), but the fix was
incomplete.
Tested with the following test program:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/wait.h>
int main() {
pid_t pid = fork();
if (pid == 0) {
exit(12);
} else {
siginfo_t siginfo = {};
waitid(P_PID, pid, &siginfo, WEXITED);
printf("Code: %d, status: %d\n", (int)siginfo.si_code, (int)siginfo.si_status);
}
pid = fork();
if (pid == 0) {
raise(SIGUSR2);
} else {
siginfo_t siginfo = {};
waitid(P_PID, pid, &siginfo, WEXITED);
printf("Code: %d, status: %d\n", (int)siginfo.si_code, (int)siginfo.si_status);
}
}
Output with an x86_64 host and mips64el target before 1c3dfb506e
(incorrect: exit code 12 is translated like a signal):
Code: 1, status: 17
Code: 2, status: 17
After 1c3dfb506e (incorrect: signal number is not translated):
Code: 1, status: 12
Code: 2, status: 12
With this patch:
Code: 1, status: 12
Code: 2, status: 17
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <81534fde7cdfc6acea4889d886fbefdd606630fb.1635019124.git.mschiffer@universe-factory.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
The Linux kernel does not handle all memory operations: no
floating-point and no MAC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This requires extra work for each target, but adds the
common syscall code, and the necessary flag in CPUState.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create a list of subcodes that we want to pass on, a list of
subcodes that should not be passed on because they would affect
the running qemu itself, and a list that probably could be
implemented but require extra work. Do not pass on unknown subcodes.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.
Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do
not support these options rather than pass them on to the host.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_SIGSTKSZ is not used, we should remove it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-4-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
cpu_loop() never exits, so mark it with QEMU_NORETURN.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20211106113916.544587-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux Hexagon port doesn't define a specific 'struct stat'
but uses the generic one (see Linux commit 6103ec56c65c [*]
"asm-generic: add generic ABI headers" which predates the
introduction of the Hexagon port).
Remove the target specific target_stat (which in fact is the
target_stat64 structure but uses incorrect target_long and
ABI unsafe long long types) and use the generic target_stat64
instead.
[*] https://github.com/torvalds/linux/commit/6103ec56c65c3#diff-5f59b07b38273b7d6a74193bc81a8cd18928c688276eae20cb10c569de3253ee
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20211116210919.2823206-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
