The description of the options starts at column 16, so fix
this in some runaway lines for a more uniform output.
While we're at it, replace the capital "NOTE" with "Note"
since this seems to be the more common capitalization in
qemu-options.hx.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch sorts the vdpa_feature_bits array
alphabetically in ascending order to avoid future duplicates.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This entry was duplicated on referenced commit. Removing it.
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
pci_nic_init_nofail() calls qemu_find_nic_model(), and this function
sets nd->model = g_strdup(default_model) if it has not been initialized
yet. So we don't have to set nd->model to the default_nic in the
calling sites.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit addresses a bug in the AVR interrupt handling code.
The modification involves replacing the usage of the ctz32 function
with ctz64 to ensure proper handling of interrupts above 33 in the AVR
target.
Previously, timers 3, 4, and 5 interrupts were not functioning correctly
because most of their interrupt vectors are numbered above 33.
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: updated subject line to have subsytem prefix)
Cc: qemu-trivial@nongnu.org
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* Miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSn7uYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPi1gf+MJNyMneyyEZgBwlwgs2NYjz+cKwW
KxtCOHDfew5S1qpq+gyvUnq5K0JJBGZKoFMwS6JwOpHASGx1o6mlF06CgLAk7wKh
yCf1kzvRA4y3tYbSwvxD5iKV3YSsayIHuJ8q2GslVXBtAZ0xC2cREQLzKLNuEV6M
rO4bj6QUV2fRc9u9TlurXijsdalUAEjmkIeZhtghhkD+lJo44yzcF7qAROaE3pFa
IYEp8pTgcbJeiI0BUNFTRk0OlE5f7MT3GIQwTC34WWPO+r/uBXL5FXNqN38svugh
7hjOliIMU4I6jpL1t7v2+9Vs38gAEPchJ0Nly4TV+dydh7l1pIn9G7ssoA==
=OBRZ
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Granite Rapids CPU model
* Miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSn7uYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPi1gf+MJNyMneyyEZgBwlwgs2NYjz+cKwW
# KxtCOHDfew5S1qpq+gyvUnq5K0JJBGZKoFMwS6JwOpHASGx1o6mlF06CgLAk7wKh
# yCf1kzvRA4y3tYbSwvxD5iKV3YSsayIHuJ8q2GslVXBtAZ0xC2cREQLzKLNuEV6M
# rO4bj6QUV2fRc9u9TlurXijsdalUAEjmkIeZhtghhkD+lJo44yzcF7qAROaE3pFa
# IYEp8pTgcbJeiI0BUNFTRk0OlE5f7MT3GIQwTC34WWPO+r/uBXL5FXNqN38svugh
# 7hjOliIMU4I6jpL1t7v2+9Vs38gAEPchJ0Nly4TV+dydh7l1pIn9G7ssoA==
# =OBRZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 11:54:30 AM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386: Add new CPU model GraniteRapids
target/i386: Add few security fix bits in ARCH_CAPABILITIES into SapphireRapids CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Allow MCDT_NO if host supports
target/i386: Add support for MCDT_NO in CPUID enumeration
target/i386: Adjust feature level according to FEAT_7_1_EDX
qemu_cleanup: begin drained section after vm_shutdown()
meson.build: Remove the logic to link C code with the C++ linker
python: bump minimum requirements so they are compatible with 3.12
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The GraniteRapids CPU model mainly adds the following new features
based on SapphireRapids:
- PREFETCHITI CPUID.(EAX=7,ECX=1):EDX[bit 14]
- AMX-FP16 CPUID.(EAX=7,ECX=1):EAX[bit 21]
And adds the following security fix for corresponding vulnerabilities:
- MCDT_NO CPUID.(EAX=7,ECX=2):EDX[bit 5]
- SBDR_SSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 13]
- FBSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 14]
- PSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 15]
- PBRSB_NO MSR_IA32_ARCH_CAPABILITIES[bit 24]
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-7-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SapphireRapids has bit 13, 14 and 15 of MSR_IA32_ARCH_CAPABILITIES
enabled, which are related to some security fixes.
Add version 2 of SapphireRapids CPU model with those bits enabled also.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20230706054949.66556-6-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, bit 13, 14, 15 and 24 of MSR_IA32_ARCH_CAPABILITIES are
disclosed for fixing security issues, so add those bit definitions.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20230706054949.66556-5-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MCDT_NO bit indicates HW contains the security fix and doesn't need to
be mitigated to avoid data-dependent behaviour for certain instructions.
It needs no hypervisor support. Treat it as supported regardless of what
KVM reports.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-4-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID.(EAX=7,ECX=2):EDX[bit 5] enumerates MCDT_NO. Processors enumerate
this bit as 1 do not exhibit MXCSR Configuration Dependent Timing (MCDT)
behavior and do not need to be mitigated to avoid data-dependent behavior
for certain instructions.
Since MCDT_NO is in a new sub-leaf, add a new CPUID feature word
FEAT_7_2_EDX. Also update cpuid_level_func7 by FEAT_7_2_EDX.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-3-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If FEAT_7_1_EAX is 0 and FEAT_7_1_EDX is non-zero, as is the case
with a Granite Rapids host and
'-cpu host,-avx-vnni,-avx512-bf16,-fzrm,-fsrs,-fsrc,-amx-fp16', we can't
get CPUID_7_1 leaf even though CPUID_7_1_EDX has non-zero value.
Update cpuid_level_func7 according to CPUID_7_1_EDX, otherwise
guest may report wrong maximum number sub-leaves in leaf 07H.
Fixes: eaaa197d5b ("target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration")
Cc: qemu-stable@nongnu.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-2-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
in order to avoid requests being stuck in a BlockBackend's request
queue during cleanup. Having such requests can lead to a deadlock [0]
with a virtio-scsi-pci device using iothread that's busy with IO when
initiating a shutdown with QMP 'quit'.
There is a race where such a queued request can continue sometime
(maybe after bdrv_child_free()?) during bdrv_root_unref_child() [1].
The completion will hold the AioContext lock and wait for the BQL
during SCSI completion, but the main thread will hold the BQL and
wait for the AioContext as part of bdrv_root_unref_child(), leading to
the deadlock [0].
[0]:
> Thread 3 (Thread 0x7f3bbd87b700 (LWP 135952) "qemu-system-x86"):
> #0 __lll_lock_wait (futex=futex@entry=0x564183365f00 <qemu_global_mutex>, private=0) at lowlevellock.c:52
> #1 0x00007f3bc1c0d843 in __GI___pthread_mutex_lock (mutex=0x564183365f00 <qemu_global_mutex>) at ../nptl/pthread_mutex_lock.c:80
> #2 0x0000564182939f2e in qemu_mutex_lock_impl (mutex=0x564183365f00 <qemu_global_mutex>, file=0x564182b7f774 "../softmmu/physmem.c", line=2593) at ../util/qemu-thread-posix.c:94
> #3 0x000056418247cc2a in qemu_mutex_lock_iothread_impl (file=0x564182b7f774 "../softmmu/physmem.c", line=2593) at ../softmmu/cpus.c:504
> #4 0x00005641826d5325 in prepare_mmio_access (mr=0x5641856148a0) at ../softmmu/physmem.c:2593
> #5 0x00005641826d6fe7 in address_space_stl_internal (as=0x56418679b310, addr=4276113408, val=16418, attrs=..., result=0x0, endian=DEVICE_LITTLE_ENDIAN) at /home/febner/repos/qemu/memory_ldst.c.inc:318
> #6 0x00005641826d7154 in address_space_stl_le (as=0x56418679b310, addr=4276113408, val=16418, attrs=..., result=0x0) at /home/febner/repos/qemu/memory_ldst.c.inc:357
> #7 0x0000564182374b07 in pci_msi_trigger (dev=0x56418679b0d0, msg=...) at ../hw/pci/pci.c:359
> #8 0x000056418237118b in msi_send_message (dev=0x56418679b0d0, msg=...) at ../hw/pci/msi.c:379
> #9 0x0000564182372c10 in msix_notify (dev=0x56418679b0d0, vector=8) at ../hw/pci/msix.c:542
> #10 0x000056418243719c in virtio_pci_notify (d=0x56418679b0d0, vector=8) at ../hw/virtio/virtio-pci.c:77
> #11 0x00005641826933b0 in virtio_notify_vector (vdev=0x5641867a34a0, vector=8) at ../hw/virtio/virtio.c:1985
> #12 0x00005641826948d6 in virtio_irq (vq=0x5641867ac078) at ../hw/virtio/virtio.c:2461
> #13 0x0000564182694978 in virtio_notify (vdev=0x5641867a34a0, vq=0x5641867ac078) at ../hw/virtio/virtio.c:2473
> #14 0x0000564182665b83 in virtio_scsi_complete_req (req=0x7f3bb000e5d0) at ../hw/scsi/virtio-scsi.c:115
> #15 0x00005641826670ce in virtio_scsi_complete_cmd_req (req=0x7f3bb000e5d0) at ../hw/scsi/virtio-scsi.c:641
> #16 0x000056418266736b in virtio_scsi_command_complete (r=0x7f3bb0010560, resid=0) at ../hw/scsi/virtio-scsi.c:712
> #17 0x000056418239aac6 in scsi_req_complete (req=0x7f3bb0010560, status=2) at ../hw/scsi/scsi-bus.c:1526
> #18 0x000056418239e090 in scsi_handle_rw_error (r=0x7f3bb0010560, ret=-123, acct_failed=false) at ../hw/scsi/scsi-disk.c:242
> #19 0x000056418239e13f in scsi_disk_req_check_error (r=0x7f3bb0010560, ret=-123, acct_failed=false) at ../hw/scsi/scsi-disk.c:265
> #20 0x000056418239e482 in scsi_dma_complete_noio (r=0x7f3bb0010560, ret=-123) at ../hw/scsi/scsi-disk.c:340
> #21 0x000056418239e5d9 in scsi_dma_complete (opaque=0x7f3bb0010560, ret=-123) at ../hw/scsi/scsi-disk.c:371
> #22 0x00005641824809ad in dma_complete (dbs=0x7f3bb000d9d0, ret=-123) at ../softmmu/dma-helpers.c:107
> #23 0x0000564182480a72 in dma_blk_cb (opaque=0x7f3bb000d9d0, ret=-123) at ../softmmu/dma-helpers.c:127
> #24 0x00005641827bf78a in blk_aio_complete (acb=0x7f3bb00021a0) at ../block/block-backend.c:1563
> #25 0x00005641827bfa5e in blk_aio_write_entry (opaque=0x7f3bb00021a0) at ../block/block-backend.c:1630
> #26 0x000056418295638a in coroutine_trampoline (i0=-1342102448, i1=32571) at ../util/coroutine-ucontext.c:177
> #27 0x00007f3bc0caed40 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
> #28 0x00007f3bbd8757f0 in ?? ()
> #29 0x0000000000000000 in ?? ()
>
> Thread 1 (Thread 0x7f3bbe3e9280 (LWP 135944) "qemu-system-x86"):
> #0 __lll_lock_wait (futex=futex@entry=0x5641856f2a00, private=0) at lowlevellock.c:52
> #1 0x00007f3bc1c0d8d1 in __GI___pthread_mutex_lock (mutex=0x5641856f2a00) at ../nptl/pthread_mutex_lock.c:115
> #2 0x0000564182939f2e in qemu_mutex_lock_impl (mutex=0x5641856f2a00, file=0x564182c0e319 "../util/async.c", line=728) at ../util/qemu-thread-posix.c:94
> #3 0x000056418293a140 in qemu_rec_mutex_lock_impl (mutex=0x5641856f2a00, file=0x564182c0e319 "../util/async.c", line=728) at ../util/qemu-thread-posix.c:149
> #4 0x00005641829532d5 in aio_context_acquire (ctx=0x5641856f29a0) at ../util/async.c:728
> #5 0x000056418279d5df in bdrv_set_aio_context_commit (opaque=0x5641856e6e50) at ../block.c:7493
> #6 0x000056418294e288 in tran_commit (tran=0x56418630bfe0) at ../util/transactions.c:87
> #7 0x000056418279d880 in bdrv_try_change_aio_context (bs=0x5641856f7130, ctx=0x56418548f810, ignore_child=0x0, errp=0x0) at ../block.c:7626
> #8 0x0000564182793f39 in bdrv_root_unref_child (child=0x5641856f47d0) at ../block.c:3242
> #9 0x00005641827be137 in blk_remove_bs (blk=0x564185709880) at ../block/block-backend.c:914
> #10 0x00005641827bd689 in blk_remove_all_bs () at ../block/block-backend.c:583
> #11 0x0000564182798699 in bdrv_close_all () at ../block.c:5117
> #12 0x000056418248a5b2 in qemu_cleanup () at ../softmmu/runstate.c:821
> #13 0x0000564182738603 in qemu_default_main () at ../softmmu/main.c:38
> #14 0x0000564182738631 in main (argc=30, argv=0x7ffd675a8a48) at ../softmmu/main.c:48
>
> (gdb) p *((QemuMutex*)0x5641856f2a00)
> $1 = {lock = {__data = {__lock = 2, __count = 2, __owner = 135952, ...
> (gdb) p *((QemuMutex*)0x564183365f00)
> $2 = {lock = {__data = {__lock = 2, __count = 0, __owner = 135944, ...
[1]:
> Thread 1 "qemu-system-x86" hit Breakpoint 5, bdrv_drain_all_end () at ../block/io.c:551
> #0 bdrv_drain_all_end () at ../block/io.c:551
> #1 0x00005569810f0376 in bdrv_graph_wrlock (bs=0x0) at ../block/graph-lock.c:156
> #2 0x00005569810bd3e0 in bdrv_replace_child_noperm (child=0x556982e2d7d0, new_bs=0x0) at ../block.c:2897
> #3 0x00005569810bdef2 in bdrv_root_unref_child (child=0x556982e2d7d0) at ../block.c:3227
> #4 0x00005569810e8137 in blk_remove_bs (blk=0x556982e42880) at ../block/block-backend.c:914
> #5 0x00005569810e7689 in blk_remove_all_bs () at ../block/block-backend.c:583
> #6 0x00005569810c2699 in bdrv_close_all () at ../block.c:5117
> #7 0x0000556980db45b2 in qemu_cleanup () at ../softmmu/runstate.c:821
> #8 0x0000556981062603 in qemu_default_main () at ../softmmu/main.c:38
> #9 0x0000556981062631 in main (argc=30, argv=0x7ffd7a82a418) at ../softmmu/main.c:48
> [Switching to Thread 0x7fe76dab2700 (LWP 103649)]
>
> Thread 3 "qemu-system-x86" hit Breakpoint 4, blk_inc_in_flight (blk=0x556982e42880) at ../block/block-backend.c:1505
> #0 blk_inc_in_flight (blk=0x556982e42880) at ../block/block-backend.c:1505
> #1 0x00005569810e8f36 in blk_wait_while_drained (blk=0x556982e42880) at ../block/block-backend.c:1312
> #2 0x00005569810e9231 in blk_co_do_pwritev_part (blk=0x556982e42880, offset=3422961664, bytes=4096, qiov=0x556983028060, qiov_offset=0, flags=0) at ../block/block-backend.c:1402
> #3 0x00005569810e9a4b in blk_aio_write_entry (opaque=0x556982e2cfa0) at ../block/block-backend.c:1628
> #4 0x000055698128038a in coroutine_trampoline (i0=-2090057872, i1=21865) at ../util/coroutine-ucontext.c:177
> #5 0x00007fe770f50d40 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
> #6 0x00007ffd7a829570 in ?? ()
> #7 0x0000000000000000 in ?? ()
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20230706131418.423713-1-f.ebner@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are not mixing C++ with C code anymore, the only remaining
C++ code in qga/vss-win32/ is used for a plain C++ executable.
Thus we can remove the hacks for linking C code with the C++ linker
now to simplify meson.build a little bit, and also to avoid that
some C++ code sneaks in by accident again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230706064736.178962-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are many Python 3.12 issues right now, but a particularly
problematic one when debugging them is that one cannot even use
minreqs.txt in a Python 3.12 virtual environment to test with
locked package versions.
Bump the mypy and wrapt versions to fix this, while remaining
within the realm of versions compatible with Python 3.7.
This requires a workaround for a mypy false positive
qemu/qmp/qmp_tui.py:350: error: Non-overlapping equality check (left operand type: "Literal[Runstate.DISCONNECTING]", right operand type: "Literal[Runstate.IDLE]") [comparison-overlap]
where mypy does not realize that self.disconnect() could change
the value of self.runstate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJkp86uAAoJEO8Ells5jWIRX00H/1T20eOfMZ+8ZyO32P1DBl5U
ZQNl5/rcg5cqjatragwagAHGYzmoegJlY3/JbWju09SPtsgbMT/nQI6EFDfpTHb6
9HB2h+43eHq+OBpmPPsmqVRzjuNi9lUmJ20We4aqJe/VM4/DHMtKW3EXGmORb7cF
wjazN5FVn+YQHgA+pckQ79k6h/lJhtLv+MuainS12o8yyCO8OyqP6Bm4lYPbBNpb
Im3HXiv05gFuS2P4lD8ZvjcdWalHDzDZW4RzKHlpcic0GBN/rcU3FDqGeOIP8qWL
oxokpjd2QmW1rX/TwaweiObEjo/3n7ymRu5PofE3T7e+gnAVfAyqDxrgAU6fMjA=
=CGHw
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJkp86uAAoJEO8Ells5jWIRX00H/1T20eOfMZ+8ZyO32P1DBl5U
# ZQNl5/rcg5cqjatragwagAHGYzmoegJlY3/JbWju09SPtsgbMT/nQI6EFDfpTHb6
# 9HB2h+43eHq+OBpmPPsmqVRzjuNi9lUmJ20We4aqJe/VM4/DHMtKW3EXGmORb7cF
# wjazN5FVn+YQHgA+pckQ79k6h/lJhtLv+MuainS12o8yyCO8OyqP6Bm4lYPbBNpb
# Im3HXiv05gFuS2P4lD8ZvjcdWalHDzDZW4RzKHlpcic0GBN/rcU3FDqGeOIP8qWL
# oxokpjd2QmW1rX/TwaweiObEjo/3n7ymRu5PofE3T7e+gnAVfAyqDxrgAU6fMjA=
# =CGHw
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 09:37:02 AM BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
igb: Remove obsolete workaround for Windows
e1000e: Add ICR clearing by corresponding IMS bit
net: socket: remove net_init_socket()
net: socket: move fd type checking to its own function
net: socket: prepare to cleanup net_init_socket()
hw/net: ftgmac100: Drop the small packet check in the receive path
hw/net: sunhme: Remove the logic of padding short frames in the receive path
hw/net: sungem: Remove the logic of padding short frames in the receive path
hw/net: rtl8139: Remove the logic of padding short frames in the receive path
hw/net: pcnet: Remove the logic of padding short frames in the receive path
hw/net: ne2000: Remove the logic of padding short frames in the receive path
hw/net: i82596: Remove the logic of padding short frames in the receive path
hw/net: vmxnet3: Remove the logic of padding short frames in the receive path
hw/net: e1000: Remove the logic of padding short frames in the receive path
virtio-net: correctly report maximum tx_queue_size value
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I confirmed it works with Windows even without this workaround. It is
likely to be a mistake so remove it.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The datasheet does not say what happens when interrupt was asserted
(ICR.INT_ASSERT=1) and auto mask is *not* active.
However, section of 13.3.27 the PCIe* GbE Controllers Open Source
Software Developer’s Manual, which were written for older devices,
namely 631xESB/632xESB, 82563EB/82564EB, 82571EB/82572EI &
82573E/82573V/82573L, does say:
> If IMS = 0b, then the ICR register is always clear-on-read. If IMS is
> not 0b, but some ICR bit is set where the corresponding IMS bit is not
> set, then a read does not clear the ICR register. For example, if
> IMS = 10101010b and ICR = 01010101b, then a read to the ICR register
> does not clear it. If IMS = 10101010b and ICR = 0101011b, then a read
> to the ICR register clears it entirely (ICR.INT_ASSERTED = 1b).
Linux does no longer activate auto mask since commit
0a8047ac68e50e4ccbadcfc6b6b070805b976885 and the real hardware clears
ICR even in such a case so we also should do so.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1707441
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move the file descriptor type checking before doing anything with it.
If it's not usable, don't close it as it could be in use by another
part of QEMU, only fail and report an error.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use directly net_socket_fd_init_stream() and net_socket_fd_init_dgram()
when the socket type is already known.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, the small packet check logic in the receive
path is no longer needed.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
This actually reverts commit 40a87c6c9b.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
This actually reverts commit 78aeb23ede.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Maximum value for tx_queue_size depends on the backend type.
1024 for vDPA/vhost-user, 256 for all the others.
The value is returned by virtio_net_max_tx_queue_size() to set the
parameter:
n->net_conf.tx_queue_size = MIN(virtio_net_max_tx_queue_size(n),
n->net_conf.tx_queue_size);
But the parameter checking uses VIRTQUEUE_MAX_SIZE (1024).
So the parameter is silently ignored and ethtool reports a different
value than the one provided by the user.
... -netdev tap,... -device virtio-net,tx_queue_size=1024
# ethtool -g enp0s2
Ring parameters for enp0s2:
Pre-set maximums:
RX: 256
RX Mini: n/a
RX Jumbo: n/a
TX: 256
Current hardware settings:
RX: 256
RX Mini: n/a
RX Jumbo: n/a
TX: 256
... -netdev vhost-user,... -device virtio-net,tx_queue_size=2048
Invalid tx_queue_size (= 2048), must be a power of 2 between 256 and 1024
With this patch the correct maximum value is checked and displayed.
For vDPA/vhost-user:
Invalid tx_queue_size (= 2048), must be a power of 2 between 256 and 1024
For all the others:
Invalid tx_queue_size (= 512), must be a power of 2 between 256 and 256
Fixes: 2eef278b9e ("virtio-net: fix tx queue size for !vhost-user")
Cc: mst@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* Add raw_writes ops for register whose write induce TLB maintenance
* hw/arm/sbsa-ref: use XHCI to replace EHCI
* Avoid splitting Zregs across lines in dump
* Dump ZA[] when active
* Fix SME full tile indexing
* Handle IC IVAU to improve compatibility with JITs
* xlnx-canfd-test: Fix code coverity issues
* gdbstub: Guard M-profile code with CONFIG_TCG
* allwinner-sramc: Set class_size
* target/xtensa: Assert that interrupt level is within bounds
* Avoid over-length shift in arm_cpu_sve_finalize() error case
* Define new 'neoverse-v1' CPU type
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmSmwEEZHHBldGVyLm1h
eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vBcD/4vKUw6klRV7vyz/KBr2AOi
Z1FnkLmOhwdp7CKvAVfU58TbPEJ8Fjo7OjziByV5nn/Ht9XrXcdl/E+0JamgrJ/n
G90ZfpoY3Boan4XBukBz/KX63sT1erF4io1NxbvqLxZ2mbZWNb0D1v2qkxC5zPFE
97knlbSle4/VB8N6VgaPaWKVy5gmBZQwl7NUlFtB8TTZp3HPo0V77E9p1Wqpwpls
BNbqdtgUre3dlJci2f24PmXHYraKa68qk9xGnsSae96EY2+pOHbKhoZ/Fobaor2C
u+dfgQ3fY3aLDVKx8UESIUoqkGoVqwEbmt+pWG2rJiljLkdsI3ZsVq7p3+VGbLAN
berL14kCC2vRQYeNUwxeh5wdNVXc58xhWI5KXQRe8hr1dKWS5LQEHWgr7g7mb0+m
zPHqbdF4FR1DAV29vQ9WyK4zttrinFAYl+zvLyd8dX2ogoUeivR+4o3YX4hlFr4H
vcrglZbCGqAb3oKQG3PSGliS9GYtBwodLqKEH8PfcwfOP5PIcnSVc0Kl9DSzf7um
dAuYpaK/XW3MPx5qpWjnip4dRWUV5m/6nSCJr+fELEv3A0sGZY4pywv5NS/Yg1wE
nXdi8D+nyx9+AAiWTcB+ePsLuDEO2gYtubfqed99TFoJbL6/b4NbH8YE6cF3N/gY
lqFyvEIYNJZ9klf7XKnX2w==
=/MkB
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230706' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Add raw_writes ops for register whose write induce TLB maintenance
* hw/arm/sbsa-ref: use XHCI to replace EHCI
* Avoid splitting Zregs across lines in dump
* Dump ZA[] when active
* Fix SME full tile indexing
* Handle IC IVAU to improve compatibility with JITs
* xlnx-canfd-test: Fix code coverity issues
* gdbstub: Guard M-profile code with CONFIG_TCG
* allwinner-sramc: Set class_size
* target/xtensa: Assert that interrupt level is within bounds
* Avoid over-length shift in arm_cpu_sve_finalize() error case
* Define new 'neoverse-v1' CPU type
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmSmwEEZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vBcD/4vKUw6klRV7vyz/KBr2AOi
# Z1FnkLmOhwdp7CKvAVfU58TbPEJ8Fjo7OjziByV5nn/Ht9XrXcdl/E+0JamgrJ/n
# G90ZfpoY3Boan4XBukBz/KX63sT1erF4io1NxbvqLxZ2mbZWNb0D1v2qkxC5zPFE
# 97knlbSle4/VB8N6VgaPaWKVy5gmBZQwl7NUlFtB8TTZp3HPo0V77E9p1Wqpwpls
# BNbqdtgUre3dlJci2f24PmXHYraKa68qk9xGnsSae96EY2+pOHbKhoZ/Fobaor2C
# u+dfgQ3fY3aLDVKx8UESIUoqkGoVqwEbmt+pWG2rJiljLkdsI3ZsVq7p3+VGbLAN
# berL14kCC2vRQYeNUwxeh5wdNVXc58xhWI5KXQRe8hr1dKWS5LQEHWgr7g7mb0+m
# zPHqbdF4FR1DAV29vQ9WyK4zttrinFAYl+zvLyd8dX2ogoUeivR+4o3YX4hlFr4H
# vcrglZbCGqAb3oKQG3PSGliS9GYtBwodLqKEH8PfcwfOP5PIcnSVc0Kl9DSzf7um
# dAuYpaK/XW3MPx5qpWjnip4dRWUV5m/6nSCJr+fELEv3A0sGZY4pywv5NS/Yg1wE
# nXdi8D+nyx9+AAiWTcB+ePsLuDEO2gYtubfqed99TFoJbL6/b4NbH8YE6cF3N/gY
# lqFyvEIYNJZ9klf7XKnX2w==
# =/MkB
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Jul 2023 02:23:13 PM BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20230706' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Avoid over-length shift in arm_cpu_sve_finalize() error case
target/arm: Define neoverse-v1
target/arm: Suppress more TCG unimplemented features in ID registers
target/xtensa: Assert that interrupt level is within bounds
hw: arm: allwinner-sramc: Set class_size
target/arm: gdbstub: Guard M-profile code with CONFIG_TCG
tests/qtest: xlnx-canfd-test: Fix code coverity issues
target/arm: Handle IC IVAU to improve compatibility with JITs
target/arm: Fix SME full tile indexing
target/arm: Dump ZA[] when active
target/arm: Avoid splitting Zregs across lines in dump
tests/tcg/aarch64/sysregs.c: Use S syntax for id_aa64zfr0_el1 and id_aa64smfr0_el1
hw/arm/sbsa-ref: use XHCI to replace EHCI
target/arm: Add raw_writes ops for register whose write induce TLB maintenance
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If you build QEMU with the clang sanitizer enabled, you can see it
fire when running the arm-cpu-features test:
$ QTEST_QEMU_BINARY=./build/arm-clang/qemu-system-aarch64 ./build/arm-clang/tests/qtest/arm-cpu-features
[...]
../../target/arm/cpu64.c:125:19: runtime error: shift exponent 64 is too large for 64-bit type 'unsigned long long'
[...]
This happens because the user can specify some incorrect SVE
properties that result in our calculating a max_vq of 0. We catch
this and error out, but before we do that we calculate
vq_mask = MAKE_64BIT_MASK(0, max_vq);$
and the MAKE_64BIT_MASK() call is only valid for lengths that are
greater than zero, so we hit the undefined behaviour.
Change the logic so that if max_vq is 0 we specifically set vq_mask
to 0 without going via MAKE_64BIT_MASK(). This lets us drop the
max_vq check from the error-exit logic, because if max_vq is 0 then
vq_map must now be 0.
The UB only happens in the case where the user passed us an incorrect
set of SVE properties, so it's not a big problem in practice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230704154332.3014896-1-peter.maydell@linaro.org
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We already squash the ID register field for FEAT_SPE (the Statistical
Profiling Extension) because TCG does not implement it and if we
advertise it to the guest the guest will crash trying to look at
non-existent system registers. Do the same for some other features
which a real hardware Neoverse-V1 implements but which TCG doesn't:
* FEAT_TRF (Self-hosted Trace Extension)
* Trace Macrocell system register access
* Memory mapped trace
* FEAT_AMU (Activity Monitors Extension)
* FEAT_MPAM (Memory Partitioning and Monitoring Extension)
* FEAT_NV (Nested Virtualization)
Most of these, like FEAT_SPE, are "introspection/trace" type features
which QEMU is unlikely to ever implement. The odd-one-out here is
FEAT_NV -- we could implement that and at some point we probably
will.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In handle_interrupt() we use level as an index into the interrupt_vector[]
array. This is safe because we have checked it against env->config->nlevel,
but Coverity can't see that (and it is only true because each CPU config
sets its XCHAL_NUM_INTLEVELS to something less than MAX_NLEVELS), so it
complains about a possible array overrun (CID 1507131)
Add an assert() which will make Coverity happy and catch the unlikely
case of a mis-set XCHAL_NUM_INTLEVELS in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 20230623154135.1930261-1-peter.maydell@linaro.org
AwSRAMCClass is larger than SysBusDeviceClass so the class size must be
advertised accordingly.
Fixes: 05def917e1 ("hw: arm: allwinner-sramc: Add SRAM Controller support for R40")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230628110905.38125-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This code is only relevant when TCG is present in the build. Building
with --disable-tcg --enable-xen on an x86 host we get:
$ ../configure --target-list=x86_64-softmmu,aarch64-softmmu --disable-tcg --enable-xen
$ make -j$(nproc)
...
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `m_sysreg_ptr':
../target/arm/gdbstub.c:358: undefined reference to `arm_v7m_get_sp_ptr'
../target/arm/gdbstub.c:361: undefined reference to `arm_v7m_get_sp_ptr'
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `arm_gdb_get_m_systemreg':
../target/arm/gdbstub.c:405: undefined reference to `arm_v7m_mrs_control'
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230628164821.16771-1-farosas@suse.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following are done to fix the coverity issues:
1. Change read_data to fix the CID 1512899: Out-of-bounds access (OVERRUN)
2. Fix match_rx_tx_data to fix CID 1512900: Logically dead code (DEADCODE)
3. Replace rand() in generate_random_data() with g_rand_int()
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Message-id: 20230628202758.16398-1-vikram.garhwal@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike architectures with precise self-modifying code semantics
(e.g. x86) ARM processors do not maintain coherency for instruction
execution and memory, requiring an instruction synchronization
barrier on every core that will execute the new code, and on many
models also the explicit use of cache management instructions.
While this is required to make JITs work on actual hardware, QEMU
has gotten away with not handling this since it does not emulate
caches, and unconditionally invalidates code whenever the softmmu
or the user-mode page protection logic detects that code has been
modified.
Unfortunately the latter does not work in the face of dual-mapped
code (a common W^X workaround), where one page is executable and
the other is writable: user-mode has no way to connect one with the
other as that is only known to the kernel and the emulated
application.
This commit works around the issue by telling software that
instruction cache invalidation is required by clearing the
CPR_EL0.DIC flag (regardless of whether the emulated processor
needs it), and then invalidating code in IC IVAU instructions.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1034
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Högberg <john.hogberg@ericsson.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 168778890374.24232.3402138851538068785-1@git.sr.ht
[PMM: removed unnecessary AArch64 feature check; moved
"clear CTR_EL1.DIC" code up a bit so it's not in the middle
of the vfp/neon related tests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.
The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always print each matrix row whole, one per line, so that we
get the entire matrix in the proper shape.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the line length to extend to 548 columns. While annoyingly wide,
it's still less confusing than the continuations we print. Also, the
default VL used by Linux (and max for A64FX) uses only 140 columns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some assemblers will complain about attempts to access
id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test
binary isn't built for the right processor type:
/tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1'
/tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1'
However, these registers are in the ID space and are guaranteed to
read-as-zero on older CPUs, so the access is both safe and sensible.
Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1
and ID_AA64MMFR2_EL1. This allows us to drop the HAS_ARMV9_SME check
and the makefile machinery to adjust the CFLAGS for this test, so we
don't rely on having a sufficiently new compiler to be able to check
these registers.
This means we're actually testing the SME ID register: no released
GCC yet recognizes -march=armv9-a+sme, so that was always skipped.
It also avoids a future problem if we try to switch the "do we have
SME support in the toolchain" check from "in the compiler" to "in the
assembler" (at which point we would otherwise run into the above
errors).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change status of 9p from 'Odd Fixes' to 'Maintained', as this better
reflects current situation. I already take care of 9p patches for a
while, which included new features as well.
Based-on: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <E1qGKgV-0003Hj-01@lizzy.crudebyte.com>
As recent CVE-2023-2861 (fixed by f6b0de53fb) once again showed, the 9p
'proxy' fs driver is in bad shape. Using the 'proxy' backend was already
discouraged for safety reasons before and we recommended to use the
'local' backend (preferably in conjunction with its 'mapped' security
model) instead, but now it is time to officially deprecate the 'proxy'
backend.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
