Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.
query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.
Commands made conditional:
* query-vnc, query-vnc-servers, change-vnc-password
Before the patch, the commands for !CONFIG_VNC are stubs that fail
like this:
{"error": {"class": "GenericError",
"desc": "The feature 'vnc' is not enabled"}}
Afterwards, they fail like this:
{"error": {"class": "CommandNotFound",
"desc": "The command FOO has not been found"}}
I call that an improvement, because it lets clients distinguish
between command unavailable (class CommandNotFound) and command failed
(class GenericError).
Events made conditional:
* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED
HMP change:
* info vnc
Will return "unknown command: 'info vnc'" when VNC is compiled
out (same as error for spice when --disable-spice)
Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:
* add_client
Command has other uses, including "socket bases character devices".
These are unconditional as far as I can tell.
* set_password, expire_password
In theory, these commands could be used for managing any service's
password. In practice, they're used for VNC and SPICE services.
They're documented for "remote display session" / "remote display
server".
The service is selected by argument @protocol. The code special-cases
protocol-specific argument checking, then calls a protocol-specific
function to do the work. If it fails, the command fails with "Could
not set password". It does when the service isn't compiled in (it's a
stub then).
We could make these commands conditional on the conjunction of all
services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
but I doubt it's worthwhile.
* change
Command has other uses, namely changing media.
This patch inlines a stub; no functional change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Sometimes SDL2 console can't be retrieved on events and scon variable
becomes NULL. This patch prevents processing of the events when the console
is not available.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Message-id: 20180626064729.18070.47600.stgit@pasha-VirtualBox
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes text and mouse event processing. These functions used
'key' field of the event instead of appropriate 'text', 'motion', 'button',
or 'wheel'.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Message-id: 20180626064017.17031.47954.stgit@pasha-VirtualBox
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for OpenGL ES to egl-helpers. Wire up the new option for
egl-headless and gtk UIs. egl-headless actually works fine. gtk hits a
not-yet implemented code path in libEGL when trying to use gles mode:
libEGL warning: FIXME: egl/x11 doesn't support front buffer rendering.
(This is mesa 17.2.3).
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Message-id: 20180618112141.23398-1-kraxel@redhat.com
instead of destroying and recreating window, fixes segfault caused by
handle_keyup trying to access no more existing window when using
Ctrl-Alt-U to restore window "un-scaled" dimensions
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffff7f92b80 (LWP 3711)]
handle_keyup (ev=0x7fffffffd010) at ui/sdl2.c:416
416 scon->ignore_hotkeys = false;
(gdb) bt
#0 handle_keyup (ev=0x7fffffffd010) at ui/sdl2.c:416
#1 sdl2_poll_events (scon=0x100fee5a8) at ui/sdl2.c:608
#2 0x0000000100585bf2 in dpy_refresh (s=0x101ad3e00) at ui/console.c:1658
#3 gui_update (opaque=0x101ad3e00) at ui/console.c:205
#4 0x0000000100690f2c in timerlist_run_timers (timer_list=0x100ede130) at util/qemu-timer.c:536
#5 0x0000000100691177 in qemu_clock_run_timers (type=QEMU_CLOCK_REALTIME) at util/qemu-timer.c:547
#6 qemu_clock_run_all_timers () at util/qemu-timer.c:674
#7 0x0000000100691651 in main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:503
#8 0x00000001003d650f in main_loop () at vl.c:1848
#9 0x0000000100289681 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4605
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Message-id: 20180613172707.31530-1-amade@asmblr.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In appears the input keymap for osx was forgotten in the commit that
converted the gtk frontend to keycodemapdb. Add it.
Fixes: 2ec78706 ("ui: convert GTK and SDL1 frontends to keycodemapdb")
CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Message-id: 1528933916-40670-1-git-send-email-keno@juliacomputing.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().
add_link() doesn't add a reference to the target object, while
set_link() does.
Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.
Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
OSX 10.13 deprecates the NSFileHandlingPanelOKButton constant, and
would rather you use NSModalResponseOK, which was introduced in OS 10.9.
Use the recommended new constant name, with a backward compatibility
define if we're building on an older OSX.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20180529181523.19185-1-peter.maydell@linaro.org
In commit 2ab858c6c3 we added a use of the 'surf' variable
in sdl2_2d_update() that was unfortunately placed above the
early-exit-if-NULL check. Move it to where it ought to be.
Fixes: Coverity CID 1390598
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180515185814.1374-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
x_keymap.o is common to the SDL and GTK+ modules, and it causes the
QEMU binary to link to the X11 libraries. Add it separately to the
modules to keep the main QEMU binary smaller.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1526560782-18732-1-git-send-email-pbonzini@redhat.com
[ kraxel: fix lm32 target build (milkymist-tmu2) ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
After f771c5440e it is possible to select device and
head which to take screendump from. And even though we check if
provided head number falls within range, it may still happen that
the console has no surface yet leading to SIGSEGV:
qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 \
-qmp stdio \
-device virtio-vga,id=video0,max_outputs=4
{"execute":"qmp_capabilities"}
{"execute":"screendump", "arguments":{"filename":"/tmp/screen.ppm", "device":"video0", "head":1}}
Segmentation fault
#0 0x00005628249dda88 in ppm_save (filename=0x56282826cbc0 "/tmp/screen.ppm", ds=0x0, errp=0x7fff52a6fae0) at ui/console.c:304
#1 0x00005628249ddd9b in qmp_screendump (filename=0x56282826cbc0 "/tmp/screen.ppm", has_device=true, device=0x5628276902d0 "video0", has_head=true, head=1, errp=0x7fff52a6fae0) at ui/console.c:375
#2 0x00005628247740df in qmp_marshal_screendump (args=0x562828265e00, ret=0x7fff52a6fb68, errp=0x7fff52a6fb60) at qapi/qapi-commands-ui.c:110
Here, @ds from frame #0 (or @surface from frame #1) is
dereferenced at the very beginning of ppm_save(). And because
it's NULL crash happens.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: cb05bb1909daa6ba62145c0194aafa05a14ed3d1.1526569138.git.mprivozn@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The F10 key is used in various applications, disable it unconditionally
(do not limit it to grab mode). Note that this property is deprecated
and might be removed in the future (GTK+ commit b082fb598d).
Fixes: https://bugs.launchpad.net/qemu/+bug/1726910
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-id: 20180510230739.28459-2-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop the gtk option parser from parse_display(), so parse_display_qapi()
will handle it instead.
With this change the parser will accept gl=core and gl=es too, gtk
must catch the unsupported gles variant now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507095539.19584-4-kraxel@redhat.com
Set magic cookie on initialization. Clear on cleanup. Sprinkle a bunch
of assert()s checking the cookie, to verify the pointer is valid.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507102254.12107-1-kraxel@redhat.com
The commit referenced below changed the logic by causing the gtk-egl
backend to be initialized regardless of whether GtkGlArea initialization
succeeded. This causes eglInitialize to crash in Wayland systems without
XWayland.
This patch restores the previous logic.
Fixes: 4c70280592 ("ui/gtk: use GtkGlArea on wayland only")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Message-id: 20180507134237.14996-1-tomeu.vizoso@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Saves some space and disables the F10 button as side-effect.
Fixes: https://bugs.launchpad.net/qemu/+bug/1726910
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-Id: <20180510230739.28459-1-peter@lekensteyn.nl>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
osdep.h is only needed for files that are compiled directly.
Remove it from included C source files, and rename them to
*.inc.c so that scripts/clean-includes knows to skip them.
Cc: Eric Blake <eblake@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dpy_gfx_update_full is used to do the whole display surface update.
This function is proposed by Gerd Hoffmann.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id: 1524820266-27079-2-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When vnc_client_read() return value is -1
vs is not valid any more.
Fixes: d49b87f0d1
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420084820.3873-1-kraxel@redhat.com
Unregistering the display change listener looks like a pointless
excercise given we'll exit in a moment. When exiting qemu via
menu/file/quit this will not happen either. Just drop the code.
Also return TRUE unconditionally. This will tell gtk to ignore the
close request, so gtk will not start destroying widgets and causing
warnings due to UI code trying to talk to widgets which are gone.
Just depend on qmp_quit() doing it's job instead.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180314080439.4229-1-kraxel@redhat.com>
The X11 code currently detects the keymap by looking for the keycode
name property. Unfortunately due to the way Xwayland handles keyboards,
this property gets unset almost immediately after the first application
starts using Xwayland resulting in
** (qemu-system-x86_64:19644): WARNING **: Unknown X11 keycode mapping '(unnamed)'.
Please report to qemu-devel@nongnu.org
including the following information:
- Operating system
- X11 Server
- xprop -root
- xdpyinfo
Fortunately people will only see this problem if they built QEMU with
GTK2, or have told GTK3 to prefer X11 by setting the GDK_BACKEND=x11
env variable.
To workaround the problem, we add a heuristic that looks at what
scancode the XK_Page_Up keysymbol maps to, to determine if we've
likely got the X11 kbd or evdev driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180313104235.20725-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not needed, kbd_put_qcode_console() will handle that for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180321135041.15768-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For both grapical and text consoles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180321135041.15768-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
This patch allows to unbind devices from QemuConsoles, using the new
graphic_console_close() function. The QemuConsole will show a static
display then, saying the device was unplugged. When re-plugging a
display later on the QemuConsole will be reused.
Eventually we will allocate and release QemuConsoles dynamically at some
point in the future, that'll need more infrastructure though to notify
user interfaces (gtk, sdl, spice, ...) about QemuConsoles coming and
going.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's screendump command can only take dumps from the primary display.
When using multiple VGA cards, there is no way to get a dump from a
secondary card or other display heads yet. So let's add a 'device' and
a 'head' parameter to the HMP and QMP commands to be able to specify
alternative devices and heads with the screendump command, too.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1520267868-31778-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for cursor dmabufs. qemu has to render the cursor for
that, so in case a cursor is present qemu allocates a new dmabuf, blits
the scanout, blends in the pointer and passes on the new dmabuf to
spice-server. Without cursor qemu continues to simply pass on the
scanout dmabuf as-is.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180308090618.30147-4-kraxel@redhat.com
Add support for scanout dmabufs. Just
pass them through to spice-server.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180308090618.30147-3-kraxel@redhat.com
Some calls are deleted, some are converted into tracepoints.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180308090618.30147-2-kraxel@redhat.com
Secondary displays in multihead setups are allowed to have a NULL
DisplaySurface. Typically user interfaces handle this by hiding the
window which shows the display in question.
This isn't an option for vnc though because it simply hasn't a concept
of windows or outputs. So handle the situation by showing a placeholder
DisplaySurface instead. Also check in console_select whenever a surface
is preset in the first place before requesting an update.
This fixes a segfault which can be triggered by switching to an unused
display (via vtrl-alt-<nr>) in a multihead setup, for example using
-device virtio-vga,max_outputs=2.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 20180308161803.6152-1-kraxel@redhat.com
Add support for cursor dmabufs to gtk-egl. Just blend in the cursor
(if we have one) when rendering the dmabuf.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-7-kraxel@redhat.com
For dma-buf support we need a egl context. The gtk x11 backend uses glx
contexts though. We can't use the GtkGlArea widget on x11 because of
that, so use our own gtk-egl code instead. wayland continues to use
the GtkGlArea widget.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-5-kraxel@redhat.com
With gtk.mo bits moved away we don't need the ifeq any more.
Also add missing opengl libs for some objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-4-kraxel@redhat.com
Compile in both gtk-egl and gtk-gl-area, then allow to choose at runtime
instead of compile time which opengl variant we want use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-2-kraxel@redhat.com
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Also drop curses libs from libs_softmmu. Add CURSES_{CFLAGS,LIBS}
variables so we can use them for linking the curses module.
Also make target/unicore32/helper.o depend on curses which uses curses
directly for some reason ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-12-kraxel@redhat.com
Also drop gtk and vte libs from libs_softmmu, so the libs are not
pulled in unless the gtk module actually gets loaded.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-11-kraxel@redhat.com
Simplifies handling the X11 dependency,
also makes ui/Makefile.objs more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-9-kraxel@redhat.com
If a requested user interface is not available, try loading it as
module, simliar to block layer modules. Needed to keep things working
when followup patches start to build user interfaces as modules.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-8-kraxel@redhat.com
Using the new display registry instead of #ifdefs in vl.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-7-kraxel@redhat.com
Add a registry for user interfaces. Add qemu_display_init and
qemu_display_early_init helper functions for display initialization.
Hook up gtk ui as first user.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-2-kraxel@redhat.com
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Pass the modifier state to the keymap lookup function. In case multiple
keysym -> keycode mappings exist look at the modifier state and prefer
the mapping where the modifier state matches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-6-kraxel@redhat.com
Sometimes the same keysym can be created using different key
combinations. Record them all in the reverse keymap, not only
the first one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-5-kraxel@redhat.com
No need to figure them at runtime from the keymap.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-4-kraxel@redhat.com
Drop home-grown lookup code, which is a strange mix of a lookup table
and a list. Use standard glib hash instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-3-kraxel@redhat.com
Also use kbd_layout_t pointers instead of void pointers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-2-kraxel@redhat.com
The cursor dmabuf can be NULL, in case no cursor defined by the guest.
Happens for example when linux guests show the framebuffer console.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180220110433.20353-3-kraxel@redhat.com
Split the cursor callback into two, one for setting the dmabuf,
one for setting the position. Also add hotspot information.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180220110433.20353-2-kraxel@redhat.com
After some hotkey was pressed sdl2 doesn't forward the first modifier
keyup event to the guest, resulting in stuck modifier keys.
Fix the logic in handle_keyup(). Also gui_key_modifier_pressed doesn't
need to be a global variable.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180220150444.784-1-kraxel@redhat.com
Fill the terminal box from right to left to avoid
Gtk-WARNING **: Allocating size to GtkScrollbar 0x55f6d54b0200 without
calling gtk_widget_get_preferred_width/height(). How does the code
know the size to allocate?
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 902aaef8-d20e-0530-dea2-cdfe3db33ff3@web.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QAPI DisplayType enum, DisplayOptions union and DisplayGTK struct.
Switch gtk configuration to use the qapi type.
Some bookkeeping (fullscreen for example) is done twice now, this is
temporary until more/all UIs are switched over to qapi configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In previous commit:
commit 6aa22a2918
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Dec 18 19:12:27 2017 +0000
ui: add trace events related to VNC client throttling
trace points related to unthrottling client I/O were missed from the
SASL codepaths.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180205114938.15784-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'vs->as.freq' value is a signed integer, which is read from an
unsigned 32-bit int field on the wire. There is thus a risk of overflow
on 32-bit platforms. Move the frequency limit checking to be done at
time of read before casting to a signed integer.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The start_auth_sasl() method declares a 'Error *local_err' variable in
an inner if () {...} scope, which shadows a variable of the same name
declared at the start of the method. This is confusing for reviewers and
may trigger compiler warnings.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For very large framebuffers, it is theoretically possible for the result
of 'vs->throttle_output_offset * VNC_THROTTLE_OUTPUT_LIMIT_SCALE' to
exceed the size of a 32-bit int. For this to happen in practice, the
video RAM would have to be set to a large enough value, which is not
likely today. None the less we can be paranoid against future growth by
using division instead of multiplication when checking the limits.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu mouse mode changes from relative to absolute
we must turn off sdl relative mouse mode too.
Fixes: https://bugs.launchpad.net/qemu/+bug/1703795
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180202120803.11501-1-kraxel@redhat.com>
The documentation on SDL_RenderPresent function states that
"the backbuffer should be considered invalidated after each present",
so copy the entire texture on each redraw.
On the other hand, SDL_UpdateTexture function is described as
"fairly slow function", so restrict it to just the changed pixels.
Also added SDL_RenderClear call, as suggested in the documentation
page on SDL_RenderPresent.
Signed-off-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Message-id: 20180205133228.25082-1-anatoly.trosinenko@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On one of our client's node, due to trying to read from closed ioc,
a segmentation fault occured. Corresponding backtrace:
0 object_get_class (obj=obj@entry=0x0)
1 qio_channel_readv_full (ioc=0x0, iov=0x7ffe55277180 ...
2 qio_channel_read (ioc=<optimized out> ...
3 vnc_client_read_buf (vs=vs@entry=0x55625f3c6000, ...
4 vnc_client_read_plain (vs=0x55625f3c6000)
5 vnc_client_read (vs=0x55625f3c6000)
6 vnc_client_io (ioc=<optimized out>, condition=G_IO_IN, ...
7 g_main_dispatch (context=0x556251568a50)
8 g_main_context_dispatch (context=context@entry=0x556251568a50)
9 glib_pollfds_poll ()
10 os_host_main_loop_wait (timeout=<optimized out>)
11 main_loop_wait (nonblocking=nonblocking@entry=0)
12 main_loop () at vl.c:1909
13 main (argc=<optimized out>, argv=<optimized out>, ...
Having analyzed the coredump, I understood that the reason is that
ioc_tag is reset on vnc_disconnect_start and ioc is cleaned
in vnc_disconnect_finish. Between these two events due to some
reasons the ioc_tag was set again and after vnc_disconnect_finish
the handler is running with freed ioc,
which led to the segmentation fault.
The patch checks vs->disconnecting in places where we call
qio_channel_add_watch and resets handler if disconnecting == TRUE
to prevent such an occurrence.
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180207094844.21402-1-klim.kireev@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_listen_io() does not own the reference on the 'cioc' parameter is it
passed, so should not be unref'ing it.
Fixes: 13e1d0e71e
Reported-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180215102602.10864-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers. Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time. Most of the
places that use it don't need all the headers, either.
Include the necessary headers directly, and drop qapi/qmp/types.h.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
keycodemapdb updated to add the QKeyCodes muhenkan and katakanahiragana
Signed-off-by: Miika S <miika9764@gmail.com>
Message-Id: <20180116134217.8725-12-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In this previous commit:
commit 8f61f1c5a6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Dec 18 19:12:20 2017 +0000
ui: track how much decoded data we consumed when doing SASL encoding
I attempted to fix a flaw with tracking how much data had actually been
processed when encoding with SASL. With that flaw, the VNC server could
mistakenly discard queued data that had not been sent.
The fix was not quite right though, because it merely decremented the
vs->output.offset value. This is effectively discarding data from the
end of the pending output buffer. We actually need to discard data from
the start of the pending output buffer. We also want to free memory that
is no longer required. The correct way to handle this is to use the
buffer_advance() helper method instead of directly manipulating the
offset value.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180201155841.27509-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server already has the ability to listen on multiple sockets.
Converting it to use the QIONetListener APIs though, will reduce the
amount of code in the VNC server and improve the clarity of what is
left.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180201164514.10330-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit:
commit 2ec78706d1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 17 16:47:15 2018 +0000
ui: convert GTK and SDL1 frontends to keycodemapdb
changed the x_keymap.c keymap so that its target was qcodes instead of
qnums. It updated the GTK frontend to take account of this change, but
forgot to update the SDL1 frontend. Thus the SDL frontend was getting
qcodes but dispatching them as if they were qnums. IOW, keyboard input
was completely hosed with SDL1. Since the keyboard layout tables are
still all based on qnums, it is easier to just keep SDL1 using qnums as
it will be deleted in a few releases time.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20180201180033.14255-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qcode-to-linux keymaps was accidentally added in the wrong place
by
commit de80d78594
Author: Owen Smith <owen.smith@citrix.com>
Date: Fri Nov 3 11:56:28 2017 +0000
ui: generate qcode to linux mappings
breaking the alphabetical ordering of keymaps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180117164118.8510-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode table with automatically
generated tables.
Missing entries in qcode_to_keycode now fixed:
- Q_KEY_CODE_KP_COMMA -> 0x2d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop no_frame flag from sdl_display_init argument list, use a global
variable instead. This is temporary until -no-frame support is dropped
altogether when we remove sdl1 support.
Remove any traces of noframe from sdl2 code. It is just dead code as
sdl2 doesn't support the SDL_NOFRAME window flag any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180115154855.30850-3-kraxel@redhat.com
The SDL 2.0 release was made in Aug, 2013:
https://www.libsdl.org/release/
That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.
Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is a reserved value and doesn't have a corresponding
valid scancode.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Versions of GTK prior to 3.22 did not correctly set the keyval
field when VK_PAUSE was received on Windows.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The x_keycode_to_pc_keycode and evdev_keycode_to_pc_keycode
tables are replaced with automatically generated tables.
In addition the X11 heuristics are improved to detect running
on XQuartz and XWin X11 servers, to activate the correct OS-X
and Win32 keycode maps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pixman returns a signed int for the image width/height, but the VNC
protocol only permits a unsigned int16. Effective framebuffer size
is determined by the guest, limited by the video RAM size, so the
dimensions are unlikely to exceed the range of an unsigned int16,
but this is not currently validated.
With the current use of 'int' for client width/height, the calculation
of offsets in vnc_update_throttle_offset() suffers from integer size
promotion and sign extension, causing coverity warnings
*** CID 1385147: Integer handling issues (SIGN_EXTENSION)
/ui/vnc.c: 979 in vnc_update_throttle_offset()
973 * than that the client would already suffering awful audio
974 * glitches, so dropping samples is no worse really).
975 */
976 static void vnc_update_throttle_offset(VncState *vs)
977 {
978 size_t offset =
>>> CID 1385147: Integer handling issues (SIGN_EXTENSION)
>>> Suspicious implicit sign extension:
"vs->client_pf.bytes_per_pixel" with type "unsigned char" (8 bits,
unsigned) is promoted in "vs->client_width * vs->client_height *
vs->client_pf.bytes_per_pixel" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long" (64 bits, unsigned). If
"vs->client_width * vs->client_height * vs->client_pf.bytes_per_pixel"
is greater than 0x7FFFFFFF, the upper bits of the result will all be 1.
979 vs->client_width * vs->client_height * vs->client_pf.bytes_per_pixel;
Change client_width / client_height to be a size_t to avoid sign
extension and integer promotion. Then validate that dimensions are in
range wrt the RFB protocol u16 limits.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180118155254.17053-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using a mouse's scroll wheel in a guest with
the cocoa front-end, the mouse pointer moves up
and down instead of scrolling the window. This
patch fixes this problem.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20180108180707.7976-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SDL2 windows change focus while a key is held, the window that
receives the focus also receives a new KeyDown event, without an
autorepeat flag. This means that if a WM places the qemu console
over the main window after Ctrl-Alt-2, the console closes immediately
after opening. Then, the main window receives the KeyDown event again
and the whole process repeats.
This patch makes the SDL2 UI ignore the KeyDown events on a window that
just received the focus, if the GUI modifier was held. The ignore flag
is reset on a first KeyUp event. This effectively works around the issue
above.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171117112258.5888-4-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fields points to an old interface that is no more
used in the current code.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GTK 3.0 release was made in Feb, 2011:
https://blog.gtk.org/2011/02/10/gtk-3-0-released/
That will soon be 7 years ago, which is enough time to consider
the 3.x series widely supported.
Thus we deprecate the GTK 2.x support, which will allow us to
delete it in the last release of 2018. By this time, GTK 3.x
will be almost 8 years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171212113440.16483-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If kbd_queue is not empty and queue_count >= queue_limit,
we should free evt.
Change-Id: Ieeacf90d5e7e370a40452ec79031912d8b864d83
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-id: 20171225023730.5512-1-linzhecheng@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the QIOChannel APIs for reading/writing data return ssize_t, with negative
value indicating an error, the VNC code passes this return value through the
vnc_client_io_error() method. This detects the error condition, disconnects the
client and returns 0 to indicate error. Thus all the VNC helper methods should
return size_t (unsigned), and misleading comments which refer to the possibility
of negative return values need fixing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-14-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC client throttling is quite subtle so will benefit from having trace
points available for live debugging.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-13-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous patches fix problems with throttling of forced framebuffer updates
and audio data capture that would cause the QEMU output buffer size to grow
without bound. Those fixes are graceful in that once the client catches up with
reading data from the server, everything continues operating normally.
There is some data which the server sends to the client that is impractical to
throttle. Specifically there are various pseudo framebuffer update encodings to
inform the client of things like desktop resizes, pointer changes, audio
playback start/stop, LED state and so on. These generally only involve sending
a very small amount of data to the client, but a malicious guest might be able
to do things that trigger these changes at a very high rate. Throttling them is
not practical as missed or delayed events would cause broken behaviour for the
client.
This patch thus takes a more forceful approach of setting an absolute upper
bound on the amount of data we permit to be present in the output buffer at
any time. The previous patch set a threshold for throttling the output buffer
by allowing an amount of data equivalent to one complete framebuffer update and
one seconds worth of audio data. On top of this it allowed for one further
forced framebuffer update to be queued.
To be conservative, we thus take that throttling threshold and multiply it by
5 to form an absolute upper bound. If this bound is hit during vnc_write() we
forceably disconnect the client, refusing to queue further data. This limit is
high enough that it should never be hit unless a malicious client is trying to
exploit the sever, or the network is completely saturated preventing any sending
of data on the socket.
This completes the fix for CVE-2017-15124 started in the previous patches.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-12-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server must throttle data sent to the client to prevent the 'output'
buffer size growing without bound, if the client stops reading data off the
socket (either maliciously or due to stalled/slow network connection).
The current throttling is very crude because it simply checks whether the
output buffer offset is zero. This check is disabled if the client has requested
a forced update, because we want to send these as soon as possible.
As a result, the VNC client can cause QEMU to allocate arbitrary amounts of RAM.
They can first start something in the guest that triggers lots of framebuffer
updates eg play a youtube video. Then repeatedly send full framebuffer update
requests, but never read data back from the server. This can easily make QEMU's
VNC server send buffer consume 100MB of RAM per second, until the OOM killer
starts reaping processes (hopefully the rogue QEMU process, but it might pick
others...).
To address this we make the throttling more intelligent, so we can throttle
full updates. When we get a forced update request, we keep track of exactly how
much data we put on the output buffer. We will not process a subsequent forced
update request until this data has been fully sent on the wire. We always allow
one forced update request to be in flight, regardless of what data is queued
for incremental updates or audio data. The slight complication is that we do
not initially know how much data an update will send, as this is done in the
background by the VNC job thread. So we must track the fact that the job thread
has an update pending, and not process any further updates until this job is
has been completed & put data on the output buffer.
This unbounded memory growth affects all VNC server configurations supported by
QEMU, with no workaround possible. The mitigating factor is that it can only be
triggered by a client that has authenticated with the VNC server, and who is
able to trigger a large quantity of framebuffer updates or audio samples from
the guest OS. Mostly they'll just succeed in getting the OOM killer to kill
their own QEMU process, but its possible other processes can get taken out as
collateral damage.
This is a more general variant of the similar unbounded memory usage flaw in
the websockets server, that was previously assigned CVE-2017-15268, and fixed
in 2.11 by:
commit a7b20a8efa
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Oct 9 14:43:42 2017 +0100
io: monitor encoutput buffer size from websocket GSource
This new general memory usage flaw has been assigned CVE-2017-15124, and is
partially fixed by this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-11-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server must throttle data sent to the client to prevent the 'output'
buffer size growing without bound, if the client stops reading data off the
socket (either maliciously or due to stalled/slow network connection).
The current throttling is very crude because it simply checks whether the
output buffer offset is zero. This check must be disabled if audio capture is
enabled, because when streaming audio the output buffer offset will rarely be
zero due to queued audio data, and so this would starve framebuffer updates.
As a result, the VNC client can cause QEMU to allocate arbitrary amounts of RAM.
They can first start something in the guest that triggers lots of framebuffer
updates eg play a youtube video. Then enable audio capture, and simply never
read data back from the server. This can easily make QEMU's VNC server send
buffer consume 100MB of RAM per second, until the OOM killer starts reaping
processes (hopefully the rogue QEMU process, but it might pick others...).
To address this we make the throttling more intelligent, so we can throttle
when audio capture is active too. To determine how to throttle incremental
updates or audio data, we calculate a size threshold. Normally the threshold is
the approximate number of bytes associated with a single complete framebuffer
update. ie width * height * bytes per pixel. We'll send incremental updates
until we hit this threshold, at which point we'll stop sending updates until
data has been written to the wire, causing the output buffer offset to fall
back below the threshold.
If audio capture is enabled, we increase the size of the threshold to also
allow for upto 1 seconds worth of audio data samples. ie nchannels * bytes
per sample * frequency. This allows the output buffer to have a mixture of
incremental framebuffer updates and audio data queued, but once the threshold
is exceeded, audio data will be dropped and incremental updates will be
throttled.
This unbounded memory growth affects all VNC server configurations supported by
QEMU, with no workaround possible. The mitigating factor is that it can only be
triggered by a client that has authenticated with the VNC server, and who is
able to trigger a large quantity of framebuffer updates or audio samples from
the guest OS. Mostly they'll just succeed in getting the OOM killer to kill
their own QEMU process, but its possible other processes can get taken out as
collateral damage.
This is a more general variant of the similar unbounded memory usage flaw in
the websockets server, that was previously assigned CVE-2017-15268, and fixed
in 2.11 by:
commit a7b20a8efa
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Oct 9 14:43:42 2017 +0100
io: monitor encoutput buffer size from websocket GSource
This new general memory usage flaw has been assigned CVE-2017-15124, and is
partially fixed by this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-10-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The logic for determining if it is possible to send an update to the client
will become more complicated shortly, so pull it out into a separate method
for easier extension later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the RFB protocol, a client sends one or more framebuffer update
requests to the server. The server can reply with a single framebuffer update
response, that covers all previously received requests. Once the client has
read this update from the server, it may send further framebuffer update
requests to monitor future changes. The client is free to delay sending the
framebuffer update request if it needs to throttle the amount of data it is
reading from the server.
The QEMU VNC server, however, has never correctly handled the framebuffer
update requests. Once QEMU has received an update request, it will continue to
send client updates forever, even if the client hasn't asked for further
updates. This prevents the client from throttling back data it gets from the
server. This change fixes the flawed logic such that after a set of updates are
sent out, QEMU waits for a further update request before sending more data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-8-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the VNC servers tracks whether a client has requested an incremental
or forced update with two boolean flags. There are only really 3 distinct
states to track, so create an enum to more accurately reflect permitted states.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we encode data for writing with SASL, we encode the entire pending output
buffer. The subsequent write, however, may not be able to send the full encoded
data in one go though, particularly with a slow network. So we delay setting the
output buffer offset back to zero until all the SASL encoded data is sent.
Between encoding the data and completing sending of the SASL encoded data,
however, more data might have been placed on the pending output buffer. So it
is not valid to set offset back to zero. Instead we must keep track of how much
data we consumed during encoding and subtract only that amount.
With the current bug we would be throwing away some pending data without having
sent it at all. By sheer luck this did not previously cause any serious problem
because appending data to the send buffer is always an atomic action, so we
only ever throw away complete RFB protocol messages. In the case of frame buffer
updates we'd catch up fairly quickly, so no obvious problem was visible.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_update_client() method checks the 'has_dirty' flag to see if there are
dirty regions that are pending to send to the client. Regardless of this flag,
if a forced update is requested, updates must be sent. For unknown reasons
though, the code also tries to sent updates if audio capture is enabled. This
makes no sense as audio capture state does not impact framebuffer contents, so
this check is removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that previous dead / unreachable code has been removed, we can simplify
the indentation in the vnc_client_update method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A previous commit:
commit 5a8be0f73d
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Jul 13 12:21:20 2016 +0200
vnc: make sure we finish disconnect
Added a check for vs->disconnecting at the very start of the
vnc_update_client method. This means that the very next "if"
statement check for !vs->disconnecting always evaluates true,
and is thus redundant. This in turn means the vs->disconnecting
check at the very end of the method never evaluates true, and
is thus unreachable code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is only one caller of vnc_update_client and that always passes false
for the 'sync' parameter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use keycodedb to generate a qcode to linux mapping
Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
With SDL 2.0.6, calling SDL_ShowWindow during SDL_WINDOWEVENT_HIDDEN
blocks all subsequent display updates.
Instead of trying to override the change, just update the scon->hidden
flag.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-2-makovick@gmail.com>
This is a partial revert of d3f3a0f453,
which in turn is a workaround for a SDL bug. The bug is fixed in 2.0.6,
see https://bugzilla.libsdl.org/show_bug.cgi?id=3410
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Prevents displaying of a doubled mouse pointer when moving the pointer
to the screen edges when fullscreen.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-8-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also use a proper enum parameter for SDL_ShowCursor
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-4-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
