It's only used within migration/, so it shouldn't be exported.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241024213056.1395400-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
When VM is configured with huge memory, the current throttle logic
doesn't look like to scale, because migration_trigger_throttle()
is only called for each iteration, so it won't be invoked for a long
time if one iteration can take a long time.
The periodic dirty sync aims to fix the above issue by synchronizing
the ramblock from remote dirty bitmap and, when necessary, triggering
the CPU throttle multiple times during a long iteration.
This is a trade-off between synchronization overhead and CPU throttle
impact.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/f61f1b3653f2acf026901103e1c73d157d38b08f.1729146786.git.yong.huang@smartx.com
[peterx: make prev_cnt global, and reset for each migration]
Signed-off-by: Peter Xu <peterx@redhat.com>
In commit 1ab08790bb we did some refactoring of the SD card
implementation, which included a rearrangement of the sd_cmd_type_t
enum values. Unfortunately we didn't notice that this enum is not
used solely inside the SD card model itself, but is also used by the
OMAP MMC controller device. In the OMAP MMC controller, it is used
to implement the handling of the Type field of the MMC_CMD register,
so changing the enum values so that they no longer lined up with the
bit definitions for that register field broke the controller model.
The effect is that Linux fails to boot from an SD card on the "sx1"
machine.
Give omap-mmc its own enum which we can document as needing to match
the encoding used in this device's register, so it isn't sharing
sd_cmd_type_t with the SD card model any more. We can then move
sd_cmd_type_t's definition out of sd.h and into sd.c, which is the
only place that uses it.
Cc: qemu-stable@nongnu.org
Fixes: 1ab08790bb ("hw/sd/sdcard: Store command type in SDProto")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241017162755.710698-1-peter.maydell@linaro.org
Request Venus when initializing VirGL and if venus=true flag is set for
virtio-gpu-gl device.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-14-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
virtio_gpu_virgl_get_num_capsets will return "num_capsets", but we can't
assume that capset_index 1 is always VIRGL2 once we'll support more capsets,
like Venus and DRM capsets. Register capsets dynamically to avoid that problem.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-13-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Support BLOB resources creation, mapping, unmapping and set-scanout by
calling the new stable virglrenderer 0.10 interface. Only enabled when
available and via the blob config. E.g. -device virtio-vga-gl,blob=true
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com> # added set_scanout_blob
Signed-off-by: Xenia Ragiadakou <xenia.ragiadakou@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-12-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
virtio_gpu_virgl_init() may fail, leading to a further Qemu crash
because Qemu assumes it never fails. Check virtio_gpu_virgl_init()
return code and don't execute virtio commands on error. Failed
virtio_gpu_virgl_init() will result in a timed out virtio commands
for a guest OS.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-5-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Move print_stats timer to VirtIOGPUGL for consistency with
cmdq_resume_bh and fence_poll that are used only by GL device.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-4-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Move fence_poll timer to VirtIOGPUGL for consistency with cmdq_resume_bh
that are used only by GL device.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-3-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* Fixed GPIO interrupt status when in index mode
* Added GPIO support for the AST2700 SoC and specific test cases
* Fixed crypto controller (HACE) Accumulative hash function
* Converted Aspeed machine avocado tests to the new functional
framework. SDK tests still to be addressed.
* Fixed issue in the SSI controller when doing writes in user mode
* Added support for the WRSR2 register of Winbond flash devices
* Added SFDP table for the Windbond w25q80bl flash device
* Changed flash device models for the ast1030-a1 EVB
-----BEGIN PGP SIGNATURE-----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=DqCH
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20241024' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixed GPIO interrupt status when in index mode
* Added GPIO support for the AST2700 SoC and specific test cases
* Fixed crypto controller (HACE) Accumulative hash function
* Converted Aspeed machine avocado tests to the new functional
framework. SDK tests still to be addressed.
* Fixed issue in the SSI controller when doing writes in user mode
* Added support for the WRSR2 register of Winbond flash devices
* Added SFDP table for the Windbond w25q80bl flash device
* Changed flash device models for the ast1030-a1 EVB
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmcZ6MIACgkQUaNDx8/7
# 7KFQPA//RTxi1PmCDlzd1ffzMWEadD3CpGLJ4RgEeZpNtkx6IF2uFFBdlNgjTSmD
# B8FdIOVb8qo2omXahKIVIgoKbGgn3U3jciH67D/x4Jyp8IhW6n5XwZzKNJ7kLVHX
# IluGmlvqNumSKl3vxsLvprC0ojRiO/SfWkzS6VOwoFPM7uNDTybQicWBBoy3Jh3e
# VVlMwIeKHMQVJGpI8PQbtnFZO4HaMqWwlo0EoIJji59fdyWULLvrXzH9YhzwFVjQ
# oCNvJUBLfxLse7c13cm/LuNmw+IQtLC5OztsOOtv1XZ1MruhJ7t316eGsQEpeWcD
# Yy5RK4mIBJMExu9oxcKOqgSznQSgenvNGWg6Z9FyyKGciylafnE8GeT35WObumyD
# v9gzgeLcw5DgvDgQXaYi4IkKyezaHoE3HPbFdBEZHBt8tn5pPGmXM0lEWL5xQ5B8
# h6HphjxIlFxeHIxYenLJowLBMOt8aFXzGboF2XCLrx19OC2zvoo7klCbFeAfZpvQ
# JMXP+GsQIe7fnBMbyXGrJh9q+/7tKR4ivtTV/vnSF0FPtyzxdoSrYsUA4SZqSWvI
# ONz62p+zlE/oXBUIaFnC2Ea41YwJ7mDbmcSU1dFxmE0xRVmoYlUocoeS2VOUmTH0
# CMgEcmMXQG0vx8nipQbScbuWRCBlf0YwJ7Y7stgI8HabmsMMbIg=
# =DqCH
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 24 Oct 2024 07:27:14 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20241024' of https://github.com/legoater/qemu:
test/qtest/aspeed_smc-test: Fix coding style
hw/arm/aspeed: Correct fmc_model w25q80bl for ast1030-a1 EVB
hw/arm/aspeed: Correct spi_model w25q256 for ast1030-a1 EVB.
hw/block/m25p80: Add SFDP table for w25q80bl flash
hw/block:m25p80: Support write status register 2 command (0x31) for w25q01jvq
hw/block:m25p80: Fix coding style
aspeed/smc: Fix write incorrect data into flash in user mode
tests/functional: Convert most Aspeed machine tests
hw/misc/aspeed_hace: Fix SG Accumulative hashing
tests/qtest:ast2700-gpio-test: Add GPIO test case for AST2700
aspeed/soc: Support GPIO for AST2700
aspeed/soc: Correct GPIO irq 130 for AST2700
hw/gpio/aspeed: Add AST2700 support
hw/gpio/aspeed: Fix clear incorrect interrupt status for GPIO index mode
hw/gpio/aspeed: Support different memory region ops
hw/gpio/aspeed: Support to set the different memory size
hw/gpio/aspeed: Fix coding style
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the design of ASPEED SPI controllers user mode, users write the
data to flash, the SPI drivers set the Control Register(0x10) bit 0 and 1
enter user mode. Then, SPI drivers send flash commands for writing data.
Finally, SPI drivers set the Control Register (0x10) bit 2 to stop
active control and restore bit 0 and 1.
According to the design of ASPEED SMC model, firmware writes the
Control Register and the "aspeed_smc_flash_update_ctrl" function is called.
Then, this function verify Control Register(0x10) bit 0 and 1. If it set user
mode, the value of s->snoop_index is SNOOP_START else SNOOP_OFF.
If s->snoop_index is SNOOP_START, the "aspeed_smc_do_snoop" function verify
the first incomming data is a new flash command and writes the corresponding
dummy bytes if need.
However, it did not check the current unselect status. If current unselect
status is "false" and firmware set the IO MODE by Control Register bit 31:28,
the value of s->snoop_index will be changed to SNOOP_START again and
"aspeed_smc_do_snoop" misunderstand that the incomming data is the new flash
command and it causes writing unexpected data into flash.
Example:
1. Firmware set user mode by Control Register bit 0 and 1(0x03)
2. SMC model set s->snoop SNOOP_START
3. Firmware set Quad Page Program with 4-Byte Address command (0x34)
4. SMC model verify this flash command and it needs 4 dummy bytes.
5. Firmware send 4 bytes address.
6. SMC model receives 4 bytes address
7. Firmware set QPI IO MODE by Control Register bit 31. (0x80000003)
8. SMC model verify new user mode by Control Register bit 0 and 1.
Then, set s->snoop SNOOP_START again. (It is the wrong behavior.)
9. Firmware send 0xebd8c134 data and it should be written into flash.
However, SMC model misunderstand that the first incoming data, 0x34,
is the new command because the value of s->snoop is changed to SNOOP_START.
Finally, SMC sned the incorrect data to flash model.
Introduce a new unselect attribute in AspeedSMCState to save the current
unselect status for user mode and set it "true" by default.
Update "aspeed_smc_flash_update_ctrl" function to check the previous unselect
status. If both new unselect status and previous unselect status is different,
update s->snoop_index value and call "aspeed_smc_flash_do_select".
Increase VMStateDescription version.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: - Replaced VMSTATE_BOOL -> VMSTATE_BOOL_V ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make the Aspeed HACE module use the new qcrypto accumulative hashing functions
when in scatter-gather accumulative mode. A hash context will maintain a
"running-hash" as each scatter-gather chunk is received.
Previously each scatter-gather "chunk" was cached
so the hash could be computed once the final chunk was received.
However, the cache was a shallow copy, so once the guest overwrote the
memory provided to HACE the final hash would not be correct.
Possibly related to: https://gitlab.com/qemu-project/qemu/-/issues/1121
Buglink: https://github.com/openbmc/qemu/issues/36
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com>
[ clg: - Checkpatch fixes
- Reworked qcrypto_hash*() error reports in do_hash_operation() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
It set "aspeed_gpio_ops" struct which containing read and write callbacks
to be used when I/O is performed on the GPIO region.
Besides, in the previous design of ASPEED SOCs, one register is used for
setting one function for 32 GPIO pins.
ex: GPIO000 is used for setting data value for GPIO A, B, C and D in AST2600.
ex: GPIO004 is used for setting direction for GPIO A, B, C and D in AST2600.
However, the register set have a significant change in AST2700.
Each GPIO pin has their own control register. In other words, users are able to
set one GPIO pin’s direction, interrupt enable, input mask and so on
in one register. The aspeed_gpio_read/aspeed_gpio_write callback functions
are not compatible AST2700.
Introduce a new "const MemoryRegionOps *" attribute in AspeedGPIOClass and
use it in aspeed_gpio_realize function.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs, a GPIO controller owns 4KB of
register space for AST2700, AST2500, AST2400 and AST1030; owns 2KB of
register space for AST2600 1.8v and owns 2KB of register space for
AST2600 3.3v.
It set the memory region size 2KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the GPIO controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Build an IPLB for any device with a bootindex (up to a maximum of 8 devices).
The IPLB chain is placed immediately before the BIOS in memory. Because this
is not a fixed address, the location of the next IPLB and number of remaining
boot devices is stored in the QIPL global variable for possible later access by
the guest during IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-16-jrossi@linux.ibm.com>
[thuth: Fix endianness problem when accessing the qipl structure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The RISC-V vector instruction set utilizes the LMUL field to group
multiple registers, enabling variable-length vector registers. This
implementation uses only the first register number of each group while
reserving the other register numbers within the group.
In TCG, each VEC_IR can have 3 types (TCG_TYPE_V64/128/256), and the
host runtime needs to adjust LMUL based on the type to use different
register groups.
This presents challenges for TCG's register allocation. Currently, we
avoid modifying the register allocation part of TCG and only expose the
minimum number of vector registers.
For example, when the host vlen is 64 bits and type is TCG_TYPE_V256, with
LMUL equal to 4, we use 4 vector registers as one register group. We can
use a maximum of 8 register groups, but the V0 register number is reserved
as a mask register, so we can effectively use at most 7 register groups.
Moreover, when type is smaller than TCG_TYPE_V256, only 7 registers are
forced to be used. This is because TCG cannot yet dynamically constrain
registers with type; likewise, when the host vlen is 128 bits and
TCG_TYPE_V256, we can use at most 15 registers.
There is not much pressure on vector register allocation in TCG now, so
using 7 registers is feasible and will not have a major impact on code
generation.
This patch:
1. Reserves vector register 0 for use as a mask register.
2. When using register groups, reserves the additional registers within
each group.
Signed-off-by: Huang Shiyuan <swung0x48@outlook.com>
Co-authored-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241007025700.47259-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The @result parameter passed to hash/hmac APIs may either contain
a pre-allocated buffer, or a buffer can be allocated on the fly.
Clarify these two different usage models in the API docs.
Reviewed-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
socket_remote_address hasn't been used since it was added in
17c55decec ("sockets: add helpers for creating SocketAddress from a socket")
inet_connect hasn't been used since 2017's
8ecc2f9eab ("sheepdog: Use SocketAddress and socket_connect()")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The Windows version of guest-set-user-password rejects argument
"crypted": true with the rather useless "this feature or command is
not currently supported". Improve to "'crypted' must be off on this
host".
QERR_UNSUPPORTED is now unused. Drop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240911131206.2503035-3-armbru@redhat.com>
* target/i386: Fixes for IN and OUT with REX prefix
* target/i386: New CPUID features and logic fixes
* target/i386: Add support save/load HWCR MSR
* target/i386: Move more instructions to new decoder; separate decoding
and IR generation
* target/i386/tcg: Use DPL-level accesses for interrupts and call gates
* accel/kvm: perform capability checks on VM file descriptor when necessary
* accel/kvm: dynamically sized kvm memslots array
* target/i386: fixes for Hyper-V
* docs/system: Add recommendations to Hyper-V enlightenments doc
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcRTIoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCewf8DnZbz7/0beql2YycrdPJZ3xnmfWW
JenWKIThKHGWRTW2ODsac21n0TNXE0vsOYjw/Z/dNLO+72sLcqvmEB18+dpHAD2J
ltb8OvuROc3nn64OEi08qIj7JYLmJ/osroI+6NnZrCOHo8nCirXoCHB7ZPqAE7/n
yDnownWaduXmXt3+Vs1mpqlBklcClxaURDDEQ8CGsxjC3jW03cno6opJPZpJqk0t
6aX92vX+3lNhIlije3QESsDX0cP1CFnQmQlNNg/xzk+ZQO+vSRrPV+A/N9xf8m1b
HiaCrlBWYef/sLgOHziOSrJV5/N8W0GDEVYDmpEswHE81BZxrOTZLxqzWw==
=qwfc
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* tcg/s390x: Fix for TSTEQ/TSTNE
* target/i386: Fixes for IN and OUT with REX prefix
* target/i386: New CPUID features and logic fixes
* target/i386: Add support save/load HWCR MSR
* target/i386: Move more instructions to new decoder; separate decoding
and IR generation
* target/i386/tcg: Use DPL-level accesses for interrupts and call gates
* accel/kvm: perform capability checks on VM file descriptor when necessary
* accel/kvm: dynamically sized kvm memslots array
* target/i386: fixes for Hyper-V
* docs/system: Add recommendations to Hyper-V enlightenments doc
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcRTIoUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCewf8DnZbz7/0beql2YycrdPJZ3xnmfWW
# JenWKIThKHGWRTW2ODsac21n0TNXE0vsOYjw/Z/dNLO+72sLcqvmEB18+dpHAD2J
# ltb8OvuROc3nn64OEi08qIj7JYLmJ/osroI+6NnZrCOHo8nCirXoCHB7ZPqAE7/n
# yDnownWaduXmXt3+Vs1mpqlBklcClxaURDDEQ8CGsxjC3jW03cno6opJPZpJqk0t
# 6aX92vX+3lNhIlije3QESsDX0cP1CFnQmQlNNg/xzk+ZQO+vSRrPV+A/N9xf8m1b
# HiaCrlBWYef/sLgOHziOSrJV5/N8W0GDEVYDmpEswHE81BZxrOTZLxqzWw==
# =qwfc
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 17 Oct 2024 18:42:34 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (26 commits)
target/i386: Use only 16 and 32-bit operands for IN/OUT
accel/kvm: check for KVM_CAP_MEMORY_ATTRIBUTES on vm
accel/kvm: check for KVM_CAP_MULTI_ADDRESS_SPACE on vm
accel/kvm: check for KVM_CAP_READONLY_MEM on VM
target/i386/tcg: Use DPL-level accesses for interrupts and call gates
KVM: Rename KVMState->nr_slots to nr_slots_max
KVM: Rename KVMMemoryListener.nr_used_slots to nr_slots_used
KVM: Define KVM_MEMSLOTS_NUM_MAX_DEFAULT
KVM: Dynamic sized kvm memslots array
target/i386: assert that cc_op* and pc_save are preserved
target/i386: list instructions still in translate.c
target/i386: do not check PREFIX_LOCK in old-style decoder
target/i386: convert CMPXCHG8B/CMPXCHG16B to new decoder
target/i386: decode address before going back to translate.c
target/i386: convert bit test instructions to new decoder
tcg/s390x: fix constraint for 32-bit TSTEQ/TSTNE
docs/system: Add recommendations to Hyper-V enlightenments doc
target/i386: Make sure SynIC state is really updated before KVM_RUN
target/i386: Exclude 'hv-syndbg' from 'hv-passthrough'
target/i386: Fix conditional CONFIG_SYNDBG enablement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This value used to reflect the maximum supported memslots from KVM kernel.
Rename it to be clearer.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240917163835.194664-5-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will make all nr_slots counters to be named in the same manner.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240917163835.194664-4-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhiyi reported an infinite loop issue in VFIO use case. The cause of that
was a separate discussion, however during that I found a regression of
dirty sync slowness when profiling.
Each KVMMemoryListerner maintains an array of kvm memslots. Currently it's
statically allocated to be the max supported by the kernel. However after
Linux commit 4fc096a99e ("KVM: Raise the maximum number of user memslots"),
the max supported memslots reported now grows to some number large enough
so that it may not be wise to always statically allocate with the max
reported.
What's worse, QEMU kvm code still walks all the allocated memslots entries
to do any form of lookups. It can drastically slow down all memslot
operations because each of such loop can run over 32K times on the new
kernels.
Fix this issue by making the memslots to be allocated dynamically.
Here the initial size was set to 16 because it should cover the basic VM
usages, so that the hope is the majority VM use case may not even need to
grow at all (e.g. if one starts a VM with ./qemu-system-x86_64 by default
it'll consume 9 memslots), however not too large to waste memory.
There can also be even better way to address this, but so far this is the
simplest and should be already better even than before we grow the max
supported memslots. For example, in the case of above issue when VFIO was
attached on a 32GB system, there are only ~10 memslots used. So it could
be good enough as of now.
In the above VFIO context, measurement shows that the precopy dirty sync
shrinked from ~86ms to ~3ms after this patch applied. It should also apply
to any KVM enabled VM even without VFIO.
NOTE: we don't have a FIXES tag for this patch because there's no real
commit that regressed this in QEMU. Such behavior existed for a long time,
but only start to be a problem when the kernel reports very large
nr_slots_max value. However that's pretty common now (the kernel change
was merged in 2021) so we attached cc:stable because we'll want this change
to be backported to stable branches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240917163835.194664-2-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
=uk+a
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241016
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-2-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Macro definition is added for acpi sleep control register, ged emulation
driver can use the macro , also it can be used in FDT table if ged is
exposed with FDT table.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Have the CPS expose a 'cpu-big-endian' property so it can
set it to the vCPUs it creates.
Note, since the number of vCPUs created is dynamic, we can
not use QOM aliases.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-16-philmd@linaro.org>
Introduce ldtul_le_p() and ldtul_be_p() to use directly
in place of ldtul_p() when a target endianness is fixed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010175246.15779-3-philmd@linaro.org>
Last use of memop_big_endian() was removed in commit 592134617c
("accel/tcg: Reorg system mode store helpers").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-3-philmd@linaro.org>
Invert target_needs_bswap() comparison to match the
COMPILING_PER_TARGET definition (2 lines upper).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010175246.15779-2-philmd@linaro.org>
Better undefined macros once we are done with them,
like we do few lines later with DO_STN_LDN_P().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-2-philmd@linaro.org>
Ensure the function names match.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20241012-dma-v2-1-6afddf5f3c8d@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ``-portrait`` and ``-rotate`` options were documented as only
working with the PXA LCD device, and all the machine types using
that display device were removed in 9.2.
These options were intended to simulate a mobile device being
rotated by the user, and had three effects:
* the display output was rotated by 90, 180 or 270 degrees
(implemented in the PXA display device models)
* the mouse/trackpad input was rotated the opposite way
(implemented in generic code)
* the machine model would signal to the guest about its
orientation
(implemented by e.g. the spitz machine model)
Of these three things, the input-rotation was coded without being
restricted to boards which supported the full set of device-rotation
handling, so in theory the options were usable on other machine
models with odd effects (rotating input but not display output). But
this was never intended or documented behaviour, so we can reasonably
drop these command line arguments without a formal deprecate-and-drop
cycle for them.
Remove the options, and their implementation and documentation.
Describe the removal in removed-features.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-7-peter.maydell@linaro.org
The ecc.c code was used only by the PXA2xx and OMAP2 SoC devices,
which we have removed, so it is now completely unused.
Note that hw/misc/eccmemctl.c does not in fact use any of the
code frome ecc.c, so that KConfig dependency was incorrect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-6-peter.maydell@linaro.org
The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g. kzm,
the strongarm machines, sh4's sh7750), none of those machines
implement their PCMCIA controller, and they're all old and
no longer very interesting machine types.
Rather than keeping all the PCMCIA code in-tree without any
active users of it, delete it. If we need PCMCIA in future
we can always resurrect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241003140010.1653808-5-peter.maydell@linaro.org
The DSCM-1XXXX microdrive device model was used only by the
XScale-based Zaurus machine types. Now they have been removed, we
can delete this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-4-peter.maydell@linaro.org
The MAX111X ADC device was used only by the XScale-based
Zaurus machine types. Now they have all been removed, we can
drop this device model too.
Because this device is an SSI device, in theory it could be created
by users on the command line for boards with a different SSI
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs which
correspond to ADC inputs, or the GPIO output which is an interrupt
line. The only example a web search produces for "device max1111" or
"device max1110" is our own bug report
https://gitlab.com/qemu-project/qemu/-/issues/2228
where it's used as an example of a bogus command that causes an
assertion in an aspeed machine type that wasn't expecting anything
other than flash devices on its SMC bus.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-2-peter.maydell@linaro.org
Pull in the kernel-doc API documentation into the lockcnt docs.
This requires us to fix one rST markup syntax error in the
header file comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816132212.3602106-8-peter.maydell@linaro.org
