This adds a test case to test 103 for performing a COW operation in a
qcow2 image using an L2 cache with minimal size (which should be at
least two clusters so the COW can access both source and destination
simultaneously).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The L2 cache must cover at least two L2 tables, because during COW two
L2 tables are accessed simultaneously.
Reported-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If passwordless "sudo" works, use it in the qemu-io cmd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RHEL6 doesn't have Python 2.7, so replace this call with
assertNotEqual(x, None) which will work just as well.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJVeppzAAoJEFIRjjwLKdprnk8H/1owSOreh0sMFbosvqlEhjXl
lvjjuprWMdX+8M1JlaDvTbw6+LDB3Rihp3A6/I9A0GFiZaORmPzg7efULAI1H6ST
0HfxMAO17eW+PJ3lvk0HidNDr01+RzTvwpizrHgQ9WJubJv0xREU+YG5yn1gPS4N
aMMTKCAQFDba7iQQLKXUYvLz76+xyzW4VIvHVLx/SU86yPg9T7CwLpppipR8+zY5
3BC4NUw/xLlS0LCYQGM8XmYgBiQ6lEAz/Y29bGlUg+LeYysjSgNSeoNbOs1M3kQp
X0Hn7b28I1CjM2wZQ9GkT/ig+jhMvw27motnAe8vKood4ytfcor+dCCS13sE8fg=
=F564
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150612' into staging
MIPS patches 2015-06-12
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
# gpg: Signature made Fri Jun 12 09:38:11 2015 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B
* remotes/lalrae/tags/mips-20150612: (29 commits)
target-mips: enable XPA and LPA features
target-mips: remove misleading comments in translate_init.c
target-mips: add MTHC0 and MFHC0 instructions
target-mips: add CP0.PageGrain.ELPA support
target-mips: support Page Frame Number Extension field
target-mips: extend selected CP0 registers to 64-bits in MIPS32
target-mips: correct MFC0 for CP0.EntryLo in MIPS64
net/dp8393x: fix hardware reset
net/dp8393x: correctly reset in_use field
net/dp8393x: add load/save support
net/dp8393x: add PROM to store MAC address
net/dp8393x: QOM'ify
net/dp8393x: use dp8393x_ prefix for all functions
net/dp8393x: do not use old_mmio accesses
net/dp8393x: always calculate proper checksums
dma/rc4030: convert to QOM
dma/rc4030: use trace events instead of custom logging
dma/rc4030: document register at offset 0x210
dma/rc4030: do not use old_mmio accesses
dma/rc4030: use AddressSpace and address_space_rw in users
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AQxN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20150612' into staging
migration/next for 20150612
# gpg: Signature made Fri Jun 12 05:56:21 2015 BST using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20150612: (21 commits)
Remove unneeded memset
Rename RDMA structures to make destination clear
Teach analyze-migration.py about section footers
Add a protective section footer
Disable section footers on older machine types
Merge section header writing
Move loadvm_handlers into MigrationIncomingState
Move copy out of qemu_peek_buffer
Create MigrationIncomingState
qemu_ram_foreach_block: pass up error value, and down the ramblock name
Split header writing out of qemu_savevm_state_begin
Add qemu_get_counted_string to read a string prefixed by a count byte
migration: Use normal VMStateDescriptions for Subsections
migration: create savevm_state
migration: Remove duplicated assignment of SETUP status
rdma: Fix qemu crash when IPv6 address is used for migration
arch_init: Clean up the duplicate variable 'len' defining in ram_load()
migration: reduce include files
migration: Add myself to the copyright list of both files
migration: move savevm.c inside migration/
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable XPA in MIPS32R5-generic and LPA in MIPS64R6-generic.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
PABITS are not hardcoded to 36 bits and we do not model 59 PABITS (which is
the architectural limit) in QEMU.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access
upper word of extended to 64-bits CP0 registers.
In MIPS64, when CP0 destination register specified is the EntryLo0 or
EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or
EntryLo1. This is to compensate for RI and XI, which were shifted to bits
63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate
functions for EntryLo0 and EntryLo1.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
CP0.PageGrain.ELPA enables support for large physical addresses. This field
is encoded as follows:
0: Large physical address support is disabled.
1: Large physical address support is enabled.
If this bit is a 1, the following changes occur to coprocessor 0 registers:
- The PFNX field of the EntryLo0 and EntryLo1 registers is writable and
concatenated with the PFN field to form the full page frame number.
- Access to optional COP0 registers with PA extension, LLAddr, TagLo is
defined.
P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if
XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode.
In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0).
env->PABITS value is constant and indicates maximum PABITS available on
a core, whereas env->PAMask is calculated from env->PABITS and is also
affected by CP0.PageGrain.ELPA.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Update tlb->PFN to contain PFN concatenated with PFNX. PFNX is 0 if large
physical address is not supported.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Extend EntryLo0, EntryLo1, LLAddr and TagLo from 32 to 64 bits in MIPS32.
Introduce gen_move_low32() function which moves low 32 bits from 64-bit
temp to GPR; it sign extends 32-bit value on MIPS64 and truncates on
MIPS32.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA has two data types that are named confusingly;
RDMALocalBlock (pointed to indirectly by local_ram_blocks)
RDMARemoteBlock (pointed to by block in RDMAContext)
RDMALocalBlocks, as the name suggests is a data strucuture that
represents the RDMAable RAM Blocks on the current side of the migration
whichever that is.
RDMARemoteBlocks is always the shape of the RAMBlocks on the
destination, even on the destination.
Rename:
RDMARemoteBlock -> RDMADestBlock
context->'block' -> context->dest_blocks
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Badly formatted migration streams can go undetected or produce
misleading errors due to a lock of checking at the end of sections.
In particular a section that adds an extra 0x00 at the end
causes what looks like a normal end of stream and thus doesn't produce
any errors, and something that ends in a 0x01..0x04 kind of look
like real section headers and then fail when the section parser tries
to figure out which section they are. This is made worse by the
choice of 0x00..0x04 being small numbers that are particularly common
in normal section data.
This patch adds a section footer consisting of a marker (0x7e - ~)
followed by the section-id that was also sent in the header. If
they mismatch then it throws an error explaining which section was
being loaded.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The next patch adds section footers; but we don't want to
break migration compatibility so disable them on older
machine types
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The header writing for device sections is open coded in
a few places, merge it into one.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we need the loadvm_handlers to be used in a couple
of different instances of the loadvm loop/routine, and thus
it can't be local any more.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_peek_buffer currently copies the data it reads into a buffer,
however a future patch wants access to the buffer without the copy,
hence rework to remove the copy to the layer above.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are currently lots of pieces of incoming migration state scattered
around, and postcopy is adding more, and it seems better to try and keep
it together.
allocate MIS in process_incoming_migration_co
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
check the return value of the function it calls and error if it's non-0
Fixup qemu_rdma_init_one_block that is the only current caller,
and rdma_add_block the only function it calls using it.
Pass the name of the ramblock to the function; helps in debugging.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Split qemu_savevm_state_begin to:
qemu_savevm_state_header That writes the initial file header.
qemu_savevm_state_begin That sets up devices and does the first
device pass.
Used later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
and use it in loadvm_state and ram_load.
Where ever it's used, check the return and error if it failed.
Minor: ram_load was using a 257 byte array for its string, the
maximum length is 255 bytes + 0 terminator, so fix to 256
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
This way, we will put savevm global state here, instead of lots of variables.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We assign the MIGRATION_STATUS_SETUP status in two places. Just in
succession. Just remove the second one.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Qemu crashes when IPv6 address is specified for migration and access
to any RDMA uverbs device available on the system is blocked using cgroups.
Fix the crash by checking the return value of ibv_open_device routine.
Signed-off-by: Meghana Cheripady <meghana.cheripady@avagotech.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are two places that define 'len' variable, It's OK for compiling,
but makes it difficult for reading.
Remove the local one which defined in the inside 'while' loop.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To make changes easier, with the copy, I maintained almost all include
files. Now I remove the unnecessary ones on this patch. This compiles
on linux x64 with all architectures configured, and cross-compiles for
windows 32 and 64 bits.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If anyone feels like adding himself to the list, just sent me a patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVeXakAAoJECgfDbjSjVRpyFAH/AwSJhBbQOxtqS66INnzoLRJ
MWD3cP8tj0PzXsLx0cuPxdTboHH60alhSp+iLGv4NgNw15okY71bY2eLhewxS66W
a0wzVCaqeeD5GAoQaSOlqNLrhBodsKS62BWD9y0kK9rtMJfCW2C1JP8Mpue1XMuE
UC72tF4Q6wVdBD/kTD9DZW/23roFu0SuieFSjbQNNi1lInXtDv79UGX0xUHaXlal
+qCtRIy/wNZF0z5arNV/Skq7LKqYl7KZtTapZByy+q6vu0L8mOeXgJ9DLh666htB
NQJJ+VhsgBKPHmZqf8h4mPlvyp03rkr5dIGk7iB2o44GPaEJ/RjZ4wULjxWD12s=
=UY/0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (42 commits)
i386/acpi-build: fix PXB workarounds for unsupported BIOSes
i386/acpi-build: more traditional _UID and _HID for PXB root buses
vhost-scsi: move qdev properties into vhost-scsi.c
virtio-9p-device: move qdev properties into virtio-9p-device.c
virtio-serial-bus: move qdev properties into virtio-serial-bus.c
virtio-rng: move qdev properties into virtio-rng.c
virtio-scsi: move qdev properties into virtio-scsi.c
virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES
virtio-net: move qdev properties into virtio-net.c
virtio-input: emulated devices [pci]
virtio-input: core code & base class [pci]
pci: add PCI_CLASS_INPUT_*
virtio-pci: fill VirtIOPCIRegions early.
virtio-pci: drop identical virtio_pci_cap
virtio-pci: move cap type to VirtIOPCIRegion
virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map
virtio-pci: add virtio_pci_modern_region_map()
virtio-pci: add virtio_pci_modern_regions_init()
virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions
virtio-balloon: switch to virtio_add_feature
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_malloc0_n() is introduced since glib-2.24 while QEMU currently
requires glib-2.22. This may cause a link error on some distributions.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch
apci: fix PXB behaviour if used with unsupported BIOS
uses the following condition to see if a "PXB mem/IO chunk" has *not* been
configured by the BIOS:
(!range_base || range_base > range_limit)
When this condition evaluates to true, said patch *omits* the
corresponding entry from the _CRS.
Later on the patch checks for the opposite condition (with the intent of
*adding* entries to the _CRS if the "PXB mem/IO chunks" *have* been
configured). Unfortunately, the condition was negated incorrectly: only
the first ! operator was removed, which led to the nonsensical expression
(range_base || range_base > range_limit)
leading to bogus entries in the _CRS, and causing BSOD in Windows Server
2012 R2 when it runs on OVMF.
The correct negative of the condition seen at the top is
(range_base && range_base <= range_limit)
Fix the expressions.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI specification permits the _HID and _UID objects to evaluate to
strings. (See "6.1.5 _HID (Hardware ID)" and "6.1.12 _UID (Unique ID)" in
the ACPI v6.0 spec.)
With regard to related standards, the UEFI specification can also express
a device address composed from string _HID and _UID identifiers, inside
the Expanded ACPI Device Path Node. (See "9.3.3 ACPI Device Path", Table
49, in the UEFI v2.5 spec.)
However, numeric (integer) contents for both _HID and _UID are more
traditional. They are recommended by the UEFI spec for size reasons:
[...] the ACPI Device Path node is smaller and should be used if
possible to reduce the size of device paths that may potentially be
stored in nonvolatile storage [...]
External tools support them better (for example the --acpi_hid and
--acpi_uid options of "efibootmgr" only take numeric identifiers).
Finally, numeric _HID and _UID contents are existing practice in the QEMU
source.
This patch was tested with a Fedora 20 LiveCD and a preexistent Windows
Server 2012 R2 guest. Using "acpidump" and "iasl" in the Fedora guest, we
get, in the SSDT:
> Scope (\_SB)
> {
> Device (PC04)
> {
> Name (_UID, 0x04) // _UID: Unique ID
> Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Documentation is not clear of what happens when doing a hardware reset,
but firmware expect all registers to be zero unless specified otherwise.
This fixes reboot on MIPS Magnum.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Don't write more than the field width, which is always 16 bit.
Fixes network in NetBSD 5.1/arc
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
