Python 3.13 is in beta and Fedora 41 is preparing to make it the default
system interpreter; enable testing for it.
(In the event problems develop prior to release, it should only impact
the check-python-tox job, which is not run by default and is allowed to
fail.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240626232230.408004-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Python 3.13 isn't out yet, but it's in beta and Fedora is ramping up to
make it the default system interpreter for Fedora 41.
They moved our cheese for where ContextManager lives; add a conditional
to locate it while we support both pre-3.9 and 3.13+.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20240626232230.408004-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When opening an image with discard=off, we punch hole in the image when
writing zeroes, making the image sparse. This breaks users that want to
ensure that writes cannot fail with ENOSPACE by using fully allocated
images[1].
bdrv_co_pwrite_zeroes() correctly disables BDRV_REQ_MAY_UNMAP if we
opened the child without discard=unmap or discard=on. But we don't go
through this function when accessing the top node. Move the check down
to bdrv_co_do_pwrite_zeroes() which seems to be used in all code paths.
This change implements the documented behavior, punching holes only when
opening the image with discard=on or discard=unmap. This may not be the
best default but can improve it later.
The test depends on a file system supporting discard, deallocating the
entire file when punching hole with the length of the entire file.
Tested with xfs, ext4, and tmpfs.
[1] https://lists.nongnu.org/archive/html/qemu-discuss/2024-06/msg00003.html
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20240628202058.1964986-3-nsoffer@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The test works since we punch holes by default even when opening the
image without discard=on or discard=unmap. Fix the test to enable
discard.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Update test case to test network connection via SSH.
Test command:
```
cd build
pyvenv/bin/avocado run ../qemu/tests/avocado/machine_aspeed.py:AST2x00MachineSDK.test_aarch64_ast2700_evb_sdk_v09_02
```
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update test case to test ASPEED OpenBMC SDK v09.02 for AST2700.
ASPEED fixed TX mask issue from linux/drivers/ftgmac100.c.
It is required to use ASPEED OpenBMC SDK since v09.02
for AST2700 QEMU network testing.
A test image is downloaded from the ASPEED Forked OpenBMC GitHub
release repository :
https://github.com/AspeedTech-BMC/openbmc/releases/
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The double-colon synax is rST formatting that precedes a literal code
block. We do not want to capture these as QAPI-specific sections.
Coerce blocks that start with e.g. "Example::" to be parsed as untagged
paragraphs instead of special tagged sections.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240626222128.406106-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Indentation tweaked for consistency]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If a comment immediately follows a doc block, the parser doesn't ignore
that token appropriately. Fix that.
e.g.
> ##
> # = Hello World!
> ##
>
> # I'm a comment!
will break the parser, because it does not properly ignore the comment
token if it immediately follows a doc block.
Fixes: 3d035cd2cc (qapi: Rewrite doc comment parser)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-7-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Change get_doc_indented() to preserve indentation on all subsequent text
lines, and create a compatibility dedent() function for qapidoc.py that
removes indentation the same way get_doc_indented() did.
This is being done for the benefit of a new qapidoc generator which
requires that indentation in argument and features sections are
preserved.
Prior to this patch, a section like this:
```
@name: lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
would have its body text be parsed into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
We want to preserve the indentation for even the first body line so that
the entire block can be parsed directly as rST. This patch would now
parse that segment into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
This is helpful for formatting arguments and features as field lists in
rST, where the new generator will format this information as:
```
:arg type name: lorem ipsum
dolor sit amet
consectetur apidiscing elit
```
...and can be formed by the simple concatenation of the field list
construct and the body text. The indents help preserve the continuation
of a block-level element, and further allow the use of additional rST
block-level constructs such as code blocks, lists, and other such
markup.
This understandably breaks the existing qapidoc.py; so a new function is
added there to dedent the text for compatibility. Once the new generator
is merged, this function will not be needed any longer and can be
dropped.
I verified this patch changes absolutely nothing by comparing the
md5sums of the QMP ref html pages both before and after the change, so
it's certified inert. QAPI test output has been updated to reflect the
new strategy of preserving indents for rST.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-6-jsnow@redhat.com>
[Lost commit message paragraph restored]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently setup_sd_card() asks the card its address,
but discard the response and use hardcoded 0x4567.
Set the SDHC_CMD_RESPONSE bit to have the controller
record the bus response, and read the response from
the RSPREG0 register. Then we can select the card with
its real address.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-4-philmd@linaro.org>
Add tests to exercise the MTE stubs. The tests will only run if a
version of GDB that supports MTE is available in the test environment.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[AJB: re-base and checkpatch fixes]
Message-Id: <20240628050850.536447-12-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-41-alex.bennee@linaro.org>
We are interested in the particular instruction so we should use a
stable record for it. We could bring this down to physical address but
for now vaddr + disas seems to do the trick.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-23-alex.bennee@linaro.org>
While the match functionality is useful lets make the verbosity
optional while we are actually running.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-22-alex.bennee@linaro.org>
Clang requires the architecture to be set properly
in order to assemble the half-precision instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-13-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-18-alex.bennee@linaro.org>
Clang does not allow specifying an integer as the value of a single
precision register. Explicitly move value from a general register.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[rth: Use one single inline asm block.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-12-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-17-alex.bennee@linaro.org>
Clang does not support IWMXT instructions.
Fall back to the external assembler.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-11-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-16-alex.bennee@linaro.org>
This is redudant with a linker script, and is not
supported by clang.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-10-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-15-alex.bennee@linaro.org>
The test cases for "converting double-precision to single-precision"
emits float but the result variable was typed as uint32_t and corrupted
the printed values. Propertly type it as float.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Fixes: 8ec8a55e3f ("tests/tcg/arm: add fcvt test cases for AArch32/64")
Message-Id: <20240627-tcg-v2-1-1690a813348e@daynix.com>
[rth: Update arm ref file as well]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-9-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-14-alex.bennee@linaro.org>
The only use of SME is inline assembly. Both gcc and clang only
support SME with very recent releases; by deferring detection to
the assembler we get better test coverage.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-8-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-13-alex.bennee@linaro.org>
clang version 18.1.6 does not support x constraint for AArch64.
Use w instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-tcg-v2-5-1690a813348e@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-7-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-12-alex.bennee@linaro.org>
clang version 18.1.6 assumes a register is 64-bit by default and
complains if a 32-bit value is given. Explicitly specify register width
when passing a 32-bit value.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240627-tcg-v2-3-1690a813348e@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-5-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-10-alex.bennee@linaro.org>
This option is not supported by clang, and is not required
in order to get sve code generation with gcc 12.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-4-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-9-alex.bennee@linaro.org>
Define the variable to the compiler flag used, not "y".
This avoids replication of the compiler flag itself.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-8-alex.bennee@linaro.org>
This avoids a memcpy to the stack when compiled with clang.
Since we don't enable optimization, nor provide memcpy,
this results in an undefined symbol error at link time.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-7-alex.bennee@linaro.org>
Previously we are always specifying -u $(UID) to match the UID in the
container with one outside. This causes a problem with rootless Podman.
Rootless Podman remaps user IDs in the container to ones controllable
for the current user outside. The -u option instructs Podman to use
a specified UID in the container but does not affect the UID remapping.
Therefore, the UID in the container can be remapped to some other UID
outside the container. This can make the access to bind-mounted volumes
fail because the remapped UID mismatches with the owner of the
directories.
Replace -u $(UID) with --userns keep-id, which fixes the UID remapping.
This change is limited to Podman because Docker does not support
--userns keep-id.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240626-podman-v1-1-f8c8daf2bb0a@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-6-alex.bennee@linaro.org>
I guess we never noticed and tried to build with this cross image. Fix
the toolchain prefix so we actually build 32 bit images.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-2-alex.bennee@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update the list of supported architectures to include RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-14-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Same machine name can be used by different architectures. Hence, create
aarch64 folder and move all aarch64 related AML files for virt machine
inside.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-11-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support multiple architectures using same machine name, create x86
folder and move all x86 related AML files for each machine type inside.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-10-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To search for expected AML files under ${arch}/${machine} path, set this
field for X86 related test cases.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To search for expected AML files under ${arch}/${machine} path, set this
field for AARCH64 related test cases.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-8-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since machine name can be common for multiple architectures (ex: virt),
add "arch" in the path to search for expected AML files. Since the AML
files are still under old path, add support for searching with and
without arch in the path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Existing AARCH64 virt test functions do not have AARCH64 in their name.
To add RISC-V virt related test cases, better to rename existing
functions to indicate they are ARM only.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-6-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To test ACPI tables, edk2 needs to be booted with a disk image having
EFI partition. This image is created using UefiTestToolsPkg.
The image is generated using tests/uefi-test-tools source.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20240625150839.1358279-5-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
edk2-funcs.sh which is used in this Makefile, was removed in the commit
c28a2891f3 ("edk2: update build script"). It is replaced with a python
based script. So, update the Makefile and add the configuration file as
required to support the python based build script.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-4-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable building the test application for RISC-V with appropriate
dependencies updated.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-3-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`memory-backend-shm` can be used with vhost-user devices, so let's
add a new test case for it.
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100534.145917-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`memory-backend-memfd` is available only on Linux while the new
`memory-backend-shm` can be used on any POSIX-compliant operating
system. Let's use it so we can run the test in multiple environments.
Since we are here, let`s remove `share=on` which is the default for shm
(and also for memfd).
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100527.145883-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Argument ordering for setcond2 is:
output, a_low, a_high, b_low, b_high, cond
The test is supposed to be against b_low, not a_high.
Cc: qemu-stable@nongnu.org
Fixes: ceb9ee06b7 ("tcg/optimize: Handle TCG_COND_TST{EQ,NE}")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2413
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240701024623.1265028-1-richard.henderson@linaro.org>
The non-standard .fa library suffix breaks the link source
de-duplication done by Meson so drop it.
The lack of link source de-duplication causes AddressSanitizer to
complain ODR violations, and makes GNU ld abort when combined with
clang's LTO.
Fortunately, the non-standard suffix is not necessary anymore for
two reasons.
First, the non-standard suffix was necessary for fork-fuzzing.
Meson wraps all standard-suffixed libraries with --start-group and
--end-group. This made a fork-fuzz.ld linker script wrapped as well and
broke builds. Commit d2e6f9272d ("fuzz: remove fork-fuzzing
scaffolding") dropped fork-fuzzing so we can now restore the standard
suffix.
Second, the libraries are not even built anymore, because it is
possible to just use the object files directly via extract_all_objects().
The occurences of the suffix were detected and removed by performing
a tree-wide search with 'fa' and .fa (note the quotes and dot).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used to request declare_dependency() to link_whole static libraries.
If a static library is a thin archive, GNU ld keeps all object files
referenced by the archive open, and sometimes exceeds the open file limit.
Another problem with link_whole is that suboptimal handling of nested
dependencies.
link_whole by itself does not propagate dependencies. In particular,
gnutls, a dependency of crypto, is not propagated to its users, and we
currently workaround the issue by declaring gnutls as a dependency for
each crypto user. On the other hand, if you write something like
libfoo = static_library('foo', 'foo.c', dependencies: gnutls)
foo = declare_dependency(link_whole: libfoo)
libbar = static_library('bar', 'bar.c', dependencies: foo)
bar = declare_dependency(link_whole: libbar, dependencies: foo)
executable('prog', sources: files('prog.c'), dependencies: [foo, bar])
hoping to propagate the gnutls dependency into bar.c, you'll see a
linking failure for "prog", because the foo.c.o object file is included in
libbar.a and therefore it is linked twice into "prog": once from libfoo.a
and once from libbar.a. Here Meson does not see the duplication, it
just asks the linker to link all of libfoo.a and libbar.a into "prog".
Instead of using link_whole, extract objects included in static libraries
and pass them to declare_dependency(); and then the dependencies can be
added as well so that they are propagated, because object files on the
linker command line are always deduplicated.
This requires Meson 1.1.0 or later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-objects-v1-1-07cbbe96166b@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Don't open qcow2 data files in 'qemu-img info'
- Disallow protocol prefixes for qcow2 data files, VMDK extent files and
other child nodes that are neither 'file' nor 'backing'
-----BEGIN PGP SIGNATURE-----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=7LWn
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches (CVE-2024-4467)
- Don't open qcow2 data files in 'qemu-img info'
- Disallow protocol prefixes for qcow2 data files, VMDK extent files and
other child nodes that are neither 'file' nor 'backing'
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmaEKQwRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9YgMA/+OeQf0veFb02ZNqf907Etz8/DvnqbiWUN
# 0aT5z5x8ilZQIiEDbFtLKgF3A/WO7phyCKk1q1dbRNbc1ZaWFW7mTaJM2ew++EuB
# fq0mnskLt/GVSqTReO4od7flsssp3sEDxs74yuyNITIUqui4we9WK2lLRiAv3aco
# 2NbyNeMHJxIW+QlOO3R62i24yjQaLyg/YekmiIK8itQkpKuI80fiVgor5W3RR0P0
# 71AVSHC0Edv5eavmiRqmQ+pfSI8tlINsN1s5jvxge6XpVTaL8NHsgH3LVv1R3Qtx
# Uo9hp6lQboAfc4I06gf+fcsYSBRiGCwA/J+JsWusX4FLaaTNHLt5eJAEJhfZlioj
# wgTqpy2ImRu5lcuLjLWRu4cLapPLI6CSwf4/lG9/szmRA/1UtOKpquKeTuCwMl9Y
# XEVoNDzo7GpfSb7YONo7fU7kq00OuEEAn0he7eNd2UU+Ao9Abi7JvY+fKx71FHo3
# k24SQVhVJihV1IEC4psCtaQm2bB/jdMr0jB44zHLtmqeUMLrrVf64cSAntp+2KRa
# sINBXA5OeblGKQ7FoAzc5NNNveSdF1ioRCvKB3MlHzI+efzRS7+I3wwh2Uz1Uwfo
# sivg+dAXQQBKVXn8UbfznFyEKueT0RW5CUbfeEqGQ/ocw7iTrXABsX+tjcktxl8Q
# zrHZNoAz6Ds=
# =7LWn
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 09:21:32 AM PDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
block: Parse filenames only when explicitly requested
iotests/270: Don't store data-file with json: prefix in image
iotests/244: Don't store data-file with protocol in image
qcow2: Don't open data_file with BDRV_O_NO_IO
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
