This bug existed since the first commit. Fortunately, the affected
registers have no functionality in qemu. This will only prevent the
following warning:
milkymist_vgafb: write access to unknown register 0x00000034
Signed-off-by: Michael Walle <michael@walle.cc>
The new version introduces the following new registers:
- SoC clock frequency: read-only of system clock used on the SoC
- debug scratchpad: 8 bit scratchpad register
- debug write lock: write once register, without any function on QEMU
Signed-off-by: Michael Walle <michael@walle.cc>
* 'qom-cpu-unicore32.v3' of git://github.com/afaerber/qemu-cpu:
target-unicore32: Move CPU-dependent init into initfn
target-unicore32: QOM'ify CPU
target-unicore32: License future contributions under GPLv2+
target-unicore32: Relicense to GPLv2+
MAINTAINERS: Add entry for UniCore32
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
ARM: Permit any ARMv6K CPU to read the MVFR0 and MVFR1 VFP registers.
target-arm: Minimalistic CPU QOM'ification
target-arm: Drop cpu_arm_close()
Older pod2man don't have a --utf8 switch, check for this in conffigure
and use it only when present. Fixes build on RHEL-5.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Some locale settings let make fail or create wrong results
because tr '[:lower:]' '[:upper:]' which is used to convert
from lower to upper case depends on the locale.
With locale tr_TR.UTF-8, lower case 'i' is not converted to 'I'.
This results in wrong entries in config-host.h like these ones:
#define CONFIG_QEMU_PREFiX "/usr/local"
#define CONFIG_QEMU_BiNDiR "/usr/local/bin"
This problem was reported by Emre Ersin.
The same problem occurs when configure creates the target specific
files config-target.mak. They get wrong declarations:
TARGET_CRiS=y
TARGET_i386=y
TARGET_MiCROBLAZE=y
TARGET_MiPS64=y
TARGET_MiPS=y
TARGET_UNiCORE32=y
It is sufficient to restrict the conversion to the characters a-z.
Using this explicit range avoids the dependency on the locale
settings and is also shorter.
v2:
POSIX says that 'tr a-z' is unspecified outside of the POSIX
locale, so we must set LC_ALL=C to make sure that we are using
POSIX (hint from Eric Blake, thanks).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid this warning on OpenBSD:
CC tests/rtc-test.o
/src/qemu/tests/rtc-test.c: In function 'check_time':
/src/qemu/tests/rtc-test.c:171: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
/src/qemu/tests/rtc-test.c:173: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Trace objects are also needed if tracing is enabled.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also includes a qtest wrapper script to make it easier to launch qtest
tests directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch combines qtest and -icount together to turn the vm_clock
into a source that can be fully managed by the client. To this end new
commands clock_step and clock_set are added. Hooking them with libqtest
is left as an exercise to the reader.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since /i440fx/piix3 is being removed from the composition tree, the
IO-APIC is placed under /i440fx. This is wrong and should be changed
as soon as the /i440fx/piix3 path is put back.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.
qtest presents itself as an accelerator. In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device. This is what
allows the external process to send CPU events to the device model.
qtest uses a simple line based protocol to send the events. Documentation of
that protocol is in qtest.c.
I considered reusing the monitor for this job. Adding interrupts would be a bit
difficult. In addition, logging would also be difficult.
qtest has extensive logging support. All protocol commands are logged with
time stamps using a new command line option (-qtest-log). Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces new test reporting infrastructure based on
gtester and gtester-report.
Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets the user specify the desired semantics. By default, the RTC
will follow adjustments from the host's NTP client, and will remain in
sync when the virtual machine is stopped. The previous behavior, which
provides determinism with both icount and qtest, remains available with
"-rtc clock=vm".
pl031 supports migration, so we need to convert the time base from
rtc_clock to vm_clock and back for backwards compatibility. (The
rtc_clock may not be synchronized on the two machines, especially with
savevm/loadvm, so the conversion is needed anyway. And since any time
base will do, why not pick the one base that is backwards compatible).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This lets the user specify the desired semantics. By default, the RTC
will follow adjustments from the host's NTP client. "-rtc clock=vm" will
improve determinism with both icount and qtest. Finally, the previous
behavior is available with "-rtc clock=rt".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The output of the pulse generator needs to be deterministic when
running in -icount mode, and to remain constant whenever the VM is
stopped. So the right clock to use is vm_clock.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will let people use backwards-compatible semantics for devices that
will be affected by the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch replaces the ARM_FEATURE_VFP3 test when reading MVFR registers
with a test for a new feature flag ARM_FEATURE_MVFR, and sets this feature
for all ARMv6K cores (ARM1156 is not a v6K core, yet supports MVFR; qemu
does not support ARM1156 at this time.)
MVFR0 and MVFR1 were introduced in ARM1136JF-S r1p0 (ARMv6K, VFPv2) and are
present in ARM1156T2F-S (non-v6K), ARM1176JZF-S, ARM11MPCore and newer cores.
Reference: ARM DDI 0211H, 0290G, 0301H, 0360E.
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0211h/Ffbefjag.html
Without this change, the linux kernel will not boot with VFP support enabled
under ARM1176 system emulation, due to the unconditional use of MVFR1 at the
end of vfp_init() in arch/arm/vfp/vfpmodule.c:
VFP support v0.3: implemetor 41 architecture 1 part 20 variant b rev 5
Internal error: Oops - undefined instruction: 0 [#1]
Signed-off-by: Andrew Towers <atowers@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of setting values in a CPUID switch, do so in initfn functions.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Embed CPUUniCore32State as first member of UniCore32CPU.
Contributed under GPLv2+.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
This is to limit relicensing obstacles to the pending IBM investigation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Adopt the license text suggested by Guan Xue-tao (with a minor
simplification) for all target-unicore/ files except helper.c.
To helper.c Anthony Liguori contributed a qemu_malloc() -> g_malloc()
conversion, still pending IBM relicensing approval, so that remains
GPLv2 for now.
By relicensing all possible parts now, we avoid having to formally
relicense new, e.g., QOM code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Dor Laor <dlaor@redhat.com>
Introduce only one non-abstract type TYPE_ARM_CPU and do not touch
cp15 registers to not interfere with Peter's ongoing remodelling.
Embed CPUARMState as first (additional) field of ARMCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There two entries of INDEX_op_ld_i64 in the ppc_op_defs. That causes an
assertion failure in tcg_add_target_add_op_defs() when --enable-debug is
used on a ppc64 backend (that's ppc64 host, not target).
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: malc <av1474@comtv.ru>
* sstabellini/disk_io:
xen_disk: when using AIO flush after the operation is completed
xen_disk: open disk with BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NATIVE_AIO
* qmp/queue/qmp:
qmp: document strict parsing
qmp: parse commands in strict mode
qmp: add and use q type specifier
qapi: add strict mode to input visitor
qapi: place outermost object on qiv stack
qapi: untangle next_list
qapi: allow freeing partially-allocated objects
qapi: shortcut visits on errors
qapi: fix memory leak on error
qapi: fail hard on stack imbalance
qapi: add a test case for type errors
qapi: add struct-errors test case to test-qmp-output-visitor
qapi: fix double free in qmp_output_visitor_cleanup()
* alon/libcacard:
libcacard/vcard_emul_nss: add warning for old coolkey
libcacard/vcard_emul_nss: handle no readers at startup
libcacard/vcard_emul_nss: don't stop thread when there are no slots
Mask incoming page address early so that resolved addresses
are page aligned. Remove further address masking.
Tested-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We need to detach the blkdev from the BlockDriverState before calling
bdrv_delete.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The first console has a different location compared to other PV devices
(console, rather than device/console/0) and doesn't obey the xenstore
state protocol. We already special case the first console in con_init
and con_initialise, we should also do it in con_disconnect.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
"O" is being used by the transaction and qom-set commands to mean "any
QObject", but it really means "do not validate the argument list".
Add a new specifier with the correct meaning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
While QMP in general is designed so that it is possible to ignore
unknown arguments, in the case of the QMP server it is better to
reject them to detect bad clients. In fact, we're already doing
this at the top level in the argument checker. To extend this to
complex structures, add a mode to the input visitor where it checks
for unvisited keys and raises an error if it finds one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a slight change in the implementation of QMPInputVisitor
that helps when adding strict mode.
Const QObjects cannot be inc/decref-ed, and that's why QMPInputVisitor
relies heavily on weak references to inner objects. I'm not removing
the weak references now, but since refcount+const is a lost battle in C
(C++ has "mutable") I think removing const is fine in this case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Right now, the semantics of next_list are complicated. The caller must:
* call start_list
* call next_list for each element *including the first*
* on the first call to next_list, the second argument should point to
NULL and the result is the head of the list. On subsequent calls,
the second argument should point to the last node (last result of
next_list) and next_list itself tacks the element at the tail of the
list.
This works for both input and output visitor, but having the visitor
write memory when it is only reading the list is ugly. Plus, relying
on *list to detect the first call is tricky and undocumented.
We can initialize so->entry in next_list instead of start_list, leaving
it NULL in start_list. This way next_list sees clearly whether it is
on the first call---as a bonus, it discriminates the cases based on
internal state of the visitor rather than external state. We can
also pull the assignment of the list head from generated code up to
next_list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Objects going through the dealloc visitor can be only partially allocated.
Detect the situation and avoid a segfault. This also helps with the
input visitor, when there are errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We can exit very soon if we enter a visitor with a preexisting error.
This simplifies some cases because we will not have to deal with
obj being non-NULL while *obj is NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
