Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
[ kwolf: Fixed up trace_paio_submit_co() call for qiov == NULL ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we
cater to the updated semantics. Do the same for bdrv_co_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch follows guidelines of all other tracepoints in qcow2, like ones
in qcow2_co_writev. I think that they should dump values in the same
quantities or be changed all together.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1463476543-3087-4-git-send-email-den@openvz.org>
[eblake: typo fix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXVtmBAAoJEJykq7OBq3PI+eIH/3sx898eSWy9GcNddxvt9PwZ
XB4R0gVG3dcGupaRFvMV3C6kLbx+5YykdZTU5heN7R3k3pBNVdPlbYhAy4KnNQqJ
SPNTk2Y2yH4VtmjIJpl2bJsYbnxQN26gFaMWrs8UzFRVeDQjT0K0OyO5yHlVkDtE
gOMA6zTQ94L0wj3g3pz8PPOGzJ/mA3MvMq+Af0h7d4iiwUqSGfZVxOQ7eS92vdmb
VkSFOJSbckOb1k2IC9uwYpvaJR3KFp7RBY2joPYoD/kHv41oLRZ06ceHEuYWYGRK
9aLiXsWIfXijKTynbbB0HeLcUKvHZok39zWl9d0zNtZ3q7Akuz94aWvbqHABG+Y=
=1Q5r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Tue 07 Jun 2016 15:26:09 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
throttle: refuse iops-size without iops-total/read/write
block: Drop bdrv_ioctl_bh_cb
block: Move BlockRequest type to io.c
block/io: optimize bdrv_co_pwritev for small requests
iostatus: fix comments for block_job_iostatus_reset
block/io: Remove unused bdrv_aio_write_zeroes()
virtio: drop duplicate virtio_queue_get_id() function
virtio-scsi: Remove op blocker for dataplane
virtio-blk: Remove op blocker for dataplane
blockdev-backup: Don't move target AioContext if it's attached
blockdev-backup: Use bdrv_lookup_bs on target
tests: avoid coroutine pool test crash
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The source guest could have reallocated the default TCE table and
migrate bigger/smaller table. This adds reallocation in post_load()
if the default table size is different on source and destination.
This adds @bus_offset, @page_shift to the migration stream as
a subsection so when DDW is added, migration to older machines will
still be possible. As @bus_offset and @page_shift are not used yet,
this makes no change in behavior.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ust trace backend has limitation of maximum 10
arguments per event. Traces with more arguments
cannot be compiled for this backend.
Trace e1000e_rx_rss_ip6 introduced by previous
commits has 11 arguments and fails to compile with
ust trace backend.
This patch fixes the problem by splitting this
tracepoint into two successive tracepoints with
smaller number of arguments.
For more information see comment regarding TP_ARGS
in lttng/tracepoint.h:
/*
* TP_ARGS takes tuples of type, argument separated by a comma.
* It can take up to 10 tuples (which means that less than 10 tuples is
* fine too).
* Each tuple is also separated by a comma.
*/
Build log generated by this problem:
In file included from ./trace/generated-tracers.h:9:0,
from /home/travis/build/qemu/qemu/include/trace.h:4,
from util/oslib-posix.c:36:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
from util/oslib-posix.c:36:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/oslib-posix.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from ./trace/generated-tracers.h:9:0,
from /home/travis/build/qemu/qemu/include/trace.h:4,
from util/hbitmap.c:16:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
from util/hbitmap.c:16:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/hbitmap.o] Error 1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Message-id: 1464894748-27803-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJXT9DWAAoJEO8Ells5jWIRgFAH/1ZDXm8V523AMDOEvBAWgqur
Dj8ZaIwFkqJp7xtLdhS0yKF3xW+vtgx9k+Qftk0S8qEiFKPbThR8iB5VNuesErwd
AZhWo4bnVhKwtWyMw3BDRDK1N4huAWPMZEva1xovR/Cc9v5IG5mx57/K3Zz5C8ec
Jsn4DsLKN0q7W0D0dlnbEOkSjl6iKJchvfPCR6UfvrU7BxfXaCZ9Z7Sfh8ec6tfr
iMgcV9u3A3Zs72gTM9/jdKx8vOrWtdKJufJ8s2Bctc7CyfBNWwnV8PjndhEe3Xvs
vlYeJopdpDPsdMkMtYD6cevtEgvD5yhOBndJ7et807jjuCvUf837tMhodKkFk9M=
=SjIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 02 Jun 2016 07:23:18 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (31 commits)
Add ENET device to i.MX6 SOC.
Add ENET/Gbps Ethernet support to FEC device
i.MX: move FEC device to a register array structure.
i.MX: Rename i.MX FEC defines to ENET_XXX
i.MX: reset TX/RX descriptors when FEC is disabled.
i.MX: Fix FEC code for ECR register reset value.
i.MX: Fix FEC code for MDIO address selection
i.MX: Fix FEC code for MDIO operation selection
net: handle optional VLAN header in checksum computation.
net: improve UDP/TCP checksum computation.
e1000e: Introduce qtest for e1000e device
net: Introduce e1000e device emulation
e1000: Move out code that will be reused in e1000e
e1000_regs: Add definitions for Intel 82574-specific bits
vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*
net_pkt: Extend packet abstraction as required by e1000e functionality
rtl8139: Move more TCP definitions to common header
net_pkt: Name vmxnet3 packet abstractions more generic
vmxnet3: Use common MAC address tracing macros
net: Add macros for MAC address tracing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces emulation for the Intel 82574 adapter, AKA e1000e.
This implementation is derived from the e1000 emulation code, and
utilizes the TX/RX packet abstractions that were initially developed for
the vmxnet3 device. Although some parts of the introduced code may be
shared with e1000, the differences are substantial enough so that the
only shared resources for the two devices are the definitions in
hw/net/e1000_regs.h.
Similarly to vmxnet3, the new device uses virtio headers for task
offloads (for backends that support virtio extensions). Usage of
virtio headers may be forcibly disabled via a boolean device property
"vnet" (which is enabled by default). In such case task offloads
will be performed in software, in the same way it is done on
backends that do not support virtio headers.
The device code is split into two parts:
1. hw/net/e1000e.c: QEMU-specific code for a network device;
2. hw/net/e1000e_core.[hc]: Device emulation according to the spec.
The new device name is e1000e.
Intel specifications for the 82574 controller are available at:
http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf
Throughput measurement results (iperf2):
Fedora 22 guest, TCP, RX
4 ++------------------------------------------+
| |
| X X X X X
3.5 ++ X X X X |
| X |
| |
3 ++ |
G | X |
b | |
/ 2.5 ++ |
s | |
| |
2 ++ |
| |
| |
1.5 X+ |
| |
+ + + + + + + + + + + +
1 ++--+---+---+---+---+---+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Fedora 22 guest, TCP, TX
18 ++-------------------------------------------+
| X |
16 ++ X X X X X
| X |
14 ++ |
| |
12 ++ |
G | X |
b 10 ++ |
/ | |
s 8 ++ |
| |
6 ++ X |
| |
4 ++ |
| X |
2 ++ X |
X + + + + + + + + + + +
0 ++--+---+---+---+---+----+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Fedora 22 guest, UDP, RX
3 ++------------------------------------------+
| X
| |
2.5 ++ |
| |
| |
2 ++ X |
G | |
b | |
/ 1.5 ++ |
s | X |
| |
1 ++ |
| |
| X |
0.5 ++ |
| X |
X + + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Fedora 22 guest, UDP, TX
1 ++------------------------------------------+
| X
0.9 ++ |
| |
0.8 ++ |
0.7 ++ |
| |
G 0.6 ++ |
b | |
/ 0.5 ++ |
s | X |
0.4 ++ |
| |
0.3 ++ |
0.2 ++ X |
| |
0.1 ++ X |
X X + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Windows 2012R2 guest, TCP, RX
3.2 ++------------------------------------------+
| X |
3 ++ |
| |
2.8 ++ |
| |
2.6 ++ X |
G | X X X X X
b 2.4 ++ X X |
/ | |
s 2.2 ++ |
| |
2 ++ |
| X X |
1.8 ++ |
| |
1.6 X+ |
+ + + + + + + + + + + +
1.4 ++--+---+---+---+---+---+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Windows 2012R2 guest, TCP, TX
14 ++-------------------------------------------+
| |
| X X
12 ++ |
| |
10 ++ |
| |
G | |
b 8 ++ |
/ | X |
s 6 ++ |
| |
| |
4 ++ X |
| |
2 ++ |
| X X X |
+ X X + + X X + + + + +
0 X+--+---+---+---+---+----+---+---+---+---+---+
32 64 128 256 512 1 2 4 8 16 32 64
B B B B B KB KB KB KB KB KB KB
Buffer size
Windows 2012R2 guest, UDP, RX
1.6 ++------------------------------------------X
| |
1.4 ++ |
| |
1.2 ++ |
| X |
| |
G 1 ++ |
b | |
/ 0.8 ++ |
s | |
0.6 ++ X |
| |
0.4 ++ |
| X |
| |
0.2 ++ X |
X + + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Windows 2012R2 guest, UDP, TX
0.6 ++------------------------------------------+
| X
| |
0.5 ++ |
| |
| |
0.4 ++ |
G | |
b | |
/ 0.3 ++ X |
s | |
| |
0.2 ++ |
| |
| X |
0.1 ++ |
| X |
X X + + + +
0 ++-------+--------+-------+--------+--------+
32 64 128 256 512 1
B B B B B KB
Datagram size
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Code that will be shared moved to a separate files.
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.
Changes are:
1. Support iovec lists for RX buffers
2. Deeper RX packets parsing
3. Loopback option for TX packets
4. Extended VLAN headers handling
5. RSS processing for RX packets
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
At the moment presence of vfio-pci devices on a bus affect the way
the guest view table is allocated. If there is no vfio-pci on a PHB
and the host kernel supports KVM acceleration of H_PUT_TCE, a table
is allocated in KVM. However, if there is vfio-pci and we do yet not
KVM acceleration for these, the table has to be allocated by
the userspace. At the moment the table is allocated once at boot time
but next patches will reallocate it.
This moves kvmppc_create_spapr_tce/g_malloc0 and their counterparts
to helpers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enable quirks to support SandyBridge and newer IGD devices as primary
VM graphics. This requires new vfio-pci device specific regions added
in kernel v4.6 to expose the IGD OpRegion, the shadow ROM, and config
space access to the PCI host bridge and LPC/ISA bridge. VM firmware
support, SeaBIOS only so far, is also required for reserving memory
regions for IGD specific use. In order to enable this mode, IGD must
be assigned to the VM at PCI bus address 00:02.0, it must have a ROM,
it must be able to enable VGA, it must have or be able to create on
its own an LPC/ISA bridge of the proper type at PCI bus address
00:1f.0 (sorry, not compatible with Q35 yet), and it must have the
above noted vfio-pci kernel features and BIOS. The intention is that
to enable this mode, a user simply needs to assign 00:02.0 from the
host to 00:02.0 in the VM:
-device vfio-pci,host=0000:00:02.0,bus=pci.0,addr=02.0
and everything either happens automatically or it doesn't. In the
case that it doesn't, we leave error reports, but assume the device
will operate in universal passthrough mode (UPT), which doesn't
require any of this, but has a much more narrow window of supported
devices, supported use cases, and supported guest drivers.
When using IGD in this mode, the VM firmware is required to reserve
some VM RAM for the OpRegion (on the order or several 4k pages) and
stolen memory for the GTT (up to 8MB for the latest GPUs). An
additional option, x-igd-gms allows the user to specify some amount
of additional memory (value is number of 32MB chunks up to 512MB) that
is pre-allocated for graphics use. TBH, I don't know of anything that
requires this or makes use of this memory, which is why we don't
allocate any by default, but the specification suggests this is not
actually a valid combination, so the option exists as a workaround.
Please report if it's actually necessary in some environment.
See code comments for further discussion about the actual operation
of the quirks necessary to assign these devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Given a device specific region type and sub-type, find it. Also
cleanup return point on error in vfio_get_region_info() so that we
always return 0 with a valid pointer or -errno and NULL.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
The sparse mmap capability in a vfio region info allows vfio to tell
us which sub-areas of a region may be mmap'd. Thus rather than
assuming a single mmap covers the entire region and later frobbing it
ourselves for things like the PCI MSI-X vector table, we can read that
directly from vfio.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=AYEK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-2' into staging
migration: add TLS support to the migration data channel
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
# gpg: Signature made Thu 26 May 2016 07:07:08 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-2: (28 commits)
migration: remove qemu_get_fd method from QEMUFile
migration: remove support for non-iovec based write handlers
migration: add support for encrypting data with TLS
migration: define 'tls-creds' and 'tls-hostname' migration parameters
migration: don't use an array for storing migrate parameters
migration: move definition of struct QEMUFile back into qemu-file.c
migration: delete QEMUFile stdio implementation
migration: delete QEMUFile sockets implementation
migration: delete QEMUSizedBuffer struct
migration: delete QEMUFile buffer implementation
migration: convert savevm to use QIOChannel for writing to files
migration: convert RDMA to use QIOChannel interface
migration: convert exec socket protocol to use QIOChannel
migration: convert fd socket protocol to use QIOChannel
migration: convert tcp socket protocol to use QIOChannel
migration: rename unix.c to socket.c
migration: convert unix socket protocol to use QIOChannel
migration: convert post-copy to use QIOChannelBuffer
migration: add reporting of errors for outgoing migration
migration: add helpers for creating QEMUFile from a QIOChannel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extends the migration_set_incoming_channel and
migration_set_outgoing_channel methods so that they
will automatically wrap the QIOChannel in a
QIOChannelTLS instance if TLS credentials are configured
in the migration parameters.
This allows TLS to work for tcp, unix, fd and exec
migration protocols. It does not (currently) work for
RDMA since it does not use these APIs, but it is
unlikely that TLS would be desired with RDMA anyway
since it would degrade the performance to that seen
with TCP defeating the purpose of using RDMA.
On the target host, QEMU would be launched with a set
of TLS credentials for a server endpoint
$ qemu-system-x86_64 -monitor stdio -incoming defer \
-object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=server,id=tls0 \
...other args...
To enable incoming TLS migration 2 monitor commands are
then used
(qemu) migrate_set_str_parameter tls-creds tls0
(qemu) migrate_incoming tcp:myhostname:9000
On the source host, QEMU is launched in a similar
manner but using client endpoint credentials
$ qemu-system-x86_64 -monitor stdio \
-object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=client,id=tls0 \
...other args...
To enable outgoing TLS migration 2 monitor commands are
then used
(qemu) migrate_set_str_parameter tls-creds tls0
(qemu) migrate tcp:otherhostname:9000
Thanks to earlier improvements to error reporting,
TLS errors can be seen 'info migrate' when doing a
detached migration. For example:
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed
total time: 0 milliseconds
error description: TLS handshake failed: The TLS connection was non-properly terminated.
Or
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed
total time: 0 milliseconds
error description: Certificate does not match the hostname localhost
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-27-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the exec socket migration protocol driver to use
QIOChannel and QEMUFileChannel, instead of the stdio
popen APIs. It can be unconditionally built because the
QIOChannelCommand class can report suitable error messages
on platforms which can't fork processes.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-17-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the fd socket migration protocol driver to use
QIOChannel and QEMUFileChannel, instead of plain sockets
APIs. It can be unconditionally built because the
QIOChannel APIs it uses will take care to report suitable
error messages if needed.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-16-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The unix.c file will be nearly the same as the tcp.c file,
only differing in the initial SocketAddress creation code.
Rename unix.c to socket.c and refactor it a little to
prepare for merging the TCP code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-14-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the unix socket migration protocol driver to use
QIOChannel and QEMUFileChannel, instead of plain sockets
APIs. It can be unconditionally built, since the socket
impl of QIOChannel will report a suitable error on platforms
where UNIX sockets are unavailable.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-13-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Currently if an application initiates an outgoing migration,
it may or may not, get an error reported back on failure. If
the error occurs synchronously to the 'migrate' command
execution, the client app will see the error message. This
is the case for DNS lookup failures. If the error occurs
asynchronously to the monitor command though, the error
will be thrown away and the client left guessing about
what went wrong. This is the case for failure to connect
to the TCP server (eg due to wrong port, or firewall
rules, or other similar errors).
In the future we'll be adding more scope for errors to
happen asynchronously with the TLS protocol handshake.
TLS errors are hard to diagnose even when they are well
reported, so discarding errors entirely will make it
impossible to debug TLS connection problems.
Management apps which do migration are already using
'query-migrate' / 'info migrate' to check up on progress
of background migration operations and to see their end
status. This is a fine place to also include the error
message when things go wrong.
This patch thus adds an 'error-desc' field to the
MigrationInfo struct, which will be populated when
the 'status' is set to 'failed':
(qemu) migrate -d tcp:localhost:9001
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed (Error connecting to socket: Connection refused)
total time: 0 milliseconds
In the HMP, when doing non-detached migration, it is
also possible to display this error message directly
to the app.
(qemu) migrate tcp:localhost:9001
Error connecting to socket: Connection refused
Or with QMP
{
"execute": "query-migrate",
"arguments": {}
}
{
"return": {
"status": "failed",
"error-desc": "address resolution failed for myhost:9000: No address associated with hostname"
}
}
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This changes the backup block job to use the job's BlockBackend for
performing its I/O. job->bs isn't used by the backup code any more
afterwards.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This changes the streaming block job to use the job's BlockBackend for
performing the COR reads. job->bs isn't used by the streaming code any
more afterwards.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Also add trace points now that the function can be directly called.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Since virtio-blk implements request merging itself these days, the only
remaining users are test cases for the function. That doesn't make the
function exactly useful any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
These are obviously critical to understanding interrupt delivery:
gic_enable_irq
gic_disable_irq
gic_set_irq (inbound irq from device models)
gic_update_set_irq (outbound irq to CPU)
gic_acknowledge_irq
The only one that I think might raise eyebrows is gic_update_bestirq, but I've
(sadly) debugged problems that ended up being caused by unexpected priorities.
Knowing that the GIC has an irq ready, but doesn't deliver to the CPU due to
priority, has also proven important.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1461252281-22399-1-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The value returned from tcg_qemu_tb_exec() is the value passed to the
corresponding tcg_gen_exit_tb() at translation time of the last TB
attempted to execute. It is a little confusing to store it in a variable
named 'next_tb'. In fact, it is a combination of 4-byte aligned pointer
and additional information in its two least significant bits. Break it
down right away into two variables named 'last_tb' and 'tb_exit' which
are a pointer to the last TB attempted to execute and the TB exit
reason, correspondingly. This simplifies the code and improves its
readability.
Correct a misleading documentation comment for tcg_qemu_tb_exec() and
fix logging in cpu_tb_exec(). Also rename a misleading 'next_tb' in
another couple of places.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Sector-based blk_aio_readv() and blk_aio_writev() should die; switch
to byte-based blk_aio_preadv() and blk_aio_pwritev() instead.
The trace is modified at the same time, and nb_sectors is now
unused. Fix a comment typo while in the vicinity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of registering emulation functions as .bdrv_co_writev, just
directly check whether the function is there or not, and use the AIO
interface if it isn't. This makes the read/write functions more
consistent with how things are done in other places (flush, discard,
etc.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Add a the new qemu_create_displaysurface_pixman function, to create
a DisplaySurface backed by an existing pixman image. In that case
there is no need to create a new pixman image pointing to the same
backing storage. We can just use the existing image directly.
This does not only simplify things a bit, but most importantly it
gets the reference counting right, so the backing storage for the
pixman image wouldn't be released underneath us.
Use new function in virtio-gpu, where using it actually fixes
use-after-free crashes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1459499240-742-1-git-send-email-kraxel@redhat.com
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1458743900-14742-1-git-send-email-sw@weilnetz.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement a basic ASPEED VIC device model for the AST2400 SoC[1], with
enough functionality to boot an aspeed_defconfig Linux kernel. The model
implements the 'new' (revised) register set: While the hardware exposes
both the new and legacy register sets, accesses to the model's legacy
register set will not be serviced (however the access will be logged).
[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-3-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to
8 timers can independently be configured, enabled, reset and disabled.
Some hardware features are not implemented, namely clock value matching
and pulse generation, but the implementation is enough to boot the Linux
kernel configured with aspeed_defconfig.
[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJW5qAFAAoJEJykq7OBq3PIii0H/1u46qp77HP0NLp2NXSqKc/T
gdFXcI/yquclABMk0L79yxigC3KtpACHWSXmHkEnAAYIPJNfoez59Ol7U10gDP8k
NKL0avpPbukCzuenlkP0/uGDwS3c25+zWxd5eabhL9AapsnAKvJdhnzkbLT62gP7
cemrHwnXRkRmKKGeloAiJiKxZakM44yr05MMAI+Yt0bsKFxGwmM63ZAW8KESJBlE
CodIEROBSDcOusN3EkBE6zBnVEb7RVVROk3QmdFjLE8olDH7Pn5yfMzs5mmgJErt
CCy1sPPIqBeHnLOAo0HrUazF06HnIC6WXa86Xg/emcodaFuwFivRrcege2dkHEc=
=T7PV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 14 Mar 2016 11:27:01 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/tracing-pull-request:
trace: separate MMIO tracepoints from TB-access tracepoints
trace: include CPU index in trace_memory_region_*()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Memory accesses to code which has previously been translated into a TB show up
in the MMIO path, so that they may invalidate the TB. It's extremely confusing
to mix those in with device MMIOs, so split them into their own tracepoint.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1456949575-1633-2-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Knowing which CPU performed an action is essential for understanding SMP guest
behavior.
However, cpu_physical_memory_rw() may be executed by a machine init function,
before any VCPUs are running, when there is no CPU running ('current_cpu' is
NULL). In this case, store -1 in the trace record as the CPU index. Trace
analysis tools may need to be aware of this special case.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1456949575-1633-1-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both platform and PCI vfio drivers create a "slow", I/O memory region
with one or more mmap memory regions overlayed when supported by the
device. Generalize this to a set of common helpers in the core that
pulls the region info from vfio, fills the region data, configures
slow mapping, and adds helpers for comleting the mmap, enable/disable,
and teardown. This can be immediately used by the PCI MSI-X code,
which needs to mmap around the MSI-X vector table.
This also changes VFIORegion.mem to be dynamically allocated because
otherwise we don't know how the caller has allocated VFIORegion and
therefore don't know whether to unreference it to destroy the
MemoryRegion or not.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When memory_region_ops tracepoints are enabled, calculate and record the
absolute address being accessed. Otherwise, we only get offsets into the
memory region instead of addresses.
[Fixed "offset" -> "addr" in trace event format strings.
--Stefan]
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1454976185-30095-3-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously, a single MMIO could trigger the memory_region_ops tracepoint twice:
once on its way into subpage ops, then later on its way into the model's ops.
Also, the fields previously called "addr" are actually offsets into the memory
region. Rename them to "offset" while we're editing the tracepoint definitions.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1454976185-30095-2-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Also fix a typo in the virtio_balloon_handle_output() trace while here.
[The double-quoting was a limitation of the old tracetool.sh script.
The modern tracetool.py script does not require double-quotes at the end
of the line. See commit cf85cf8e97
("trace: Format strings must begin/end with double quotes").
--Stefan]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20160111173036.24764.59878.stgit@bahia.huguette.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "pnum < nb_sectors" condition in deciding whether to actually copy
data is unnecessarily strict, and the qiov initialization is
unnecessarily for bdrv_aio_write_zeroes and bdrv_aio_discard.
Rewrite mirror_iteration to fix both flaws.
The output of iotests 109 is updated because we now report the offset
and len slightly differently in mirroring progress.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1454637630-10585-2-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0
This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.
The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).
This fixes the issues mentioned above.
Based on previous work from Brian W. Hart.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PCI spec recommends devices use additional alignment for MSI-X
data structures to allow software to map them to separate processor
pages. One advantage of doing this is that we can emulate those data
structures without a significant performance impact to the operation
of the device. Some devices fail to implement that suggestion and
assigned device performance suffers.
One such case of this is a Mellanox MT27500 series, ConnectX-3 VF,
where the MSI-X vector table and PBA are aligned on separate 4K
pages. If PBA emulation is enabled, performance suffers. It's not
clear how much value we get from PBA emulation, but the solution here
is to only lazily enable the emulated PBA when a masked MSI-X vector
fires. We then attempt to more aggresively disable the PBA memory
region any time a vector is unmasked. The expectation is then that
a typical VM will run entirely with PBA emulation disabled, and only
when used is that emulation re-enabled.
Reported-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Tested-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit c8ee0a4 introduced new events containing PRIx64 constants without
including the % prefix in the preceding string. This results in a compile
error during build if --enable-trace-backends is passed to configure.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450566522-6003-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some functions was moved from block.c to block/io.c, so the trace-events file should reflect that change.
Signed-off-by: Qinghua Jin <qhjin_dev@163.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the websocket protocol over
the top of another QIOChannel instance. This initial implementation
is only capable of acting as a websockets server. There is no support
for acting as a websockets client yet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of operating on things
that are files, such as plain files, pipes, character/block
devices, but notably not sockets.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of I/O operations need to be performed asynchronously
to avoid blocking the main loop. The caller of such APIs need
to provide a callback to be invoked on completion/error and
need access to the error, if any. The small QIOTask provides
a simple framework for dealing with such probes. The API
docs inline provide an outline of how this is to be used.
Some functions don't have the ability to run asynchronously
(eg getaddrinfo always blocks), so to facilitate their use,
the task class provides a mechanism to run a blocking
function in a thread, while triggering the completion
callback in the main event loop thread. This easily allows
any synchronous function to be made asynchronous, albeit
at the cost of spawning a thread.
In this series, the QIOTask class will be used for things like
the TLS handshake, the websockets handshake and TCP connect()
progress.
The concept of QIOTask is inspired by the GAsyncResult
interface / GTask class in the GIO libraries. The min
version requirements on glib don't allow those to be
used from QEMU, so QIOTask provides a facsimilie which
can be easily switched to GTask in the future if the
min version is increased.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
"Unimplemented" messages go to stderr, everything else goes to tracepoints
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce fw_cfg_data_read(), a generic read method which works
on all access widths (1 through 8 bytes, inclusive), and can be
used during both IOPort and MMIO read accesses.
To maintain legibility, only fw_cfg_data_mem_read() (the MMIO
data read method) is replaced by this patch. The new method
essentially unwinds the fw_cfg_data_mem_read() + fw_cfg_read()
combo, but without unnecessarily repeating all the validity
checks performed by the latter on each byte being read.
This patch also modifies the trace_fw_cfg_read prototype to
accept a 64-bit value argument, allowing it to work properly
with the new read method, but also remain backward compatible
with existing call sites.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-6-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For now, we use inotify watches to track only a small number of
events, namely, add, delete and modify. Note that for delete, the kernel
already deactivates the watch for us and we just need to
take care of modifying our internal state.
inotify is a linux only mechanism.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-4-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To support adding/removal of objects, we will need to update
the object cache hierarchy we have built internally. Convert
to using a Qlist for easier management.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The assertion problem was noticed in 06c3916b35, but it wasn't
completely fixed, because even though the req is not marked as
serialising, it still gets serialised by wait_serialising_requests
against other serialising requests, which could lead to the same
assertion failure.
Fix it by even more explicitly skipping the serialising for this
specific case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tweak the end of migration cleanup; we don't want to close stuff down
at the end of the main stream, since the postcopy is still sending pages
on the other thread.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Prior to servicing userfault requests we must ensure we've not got
huge pages in the area that might include non-transferred memory,
since a hugepage could incorrectly mark the whole huge page as present.
We mark the area as non-huge page (nhp) just before we perform
discards; the discard code now tells us to discard any areas
that haven't been sent (as well as any that are redirtied);
any already formed transparent-huge-pages get fragmented
by this discard process if they cotnain any discards.
Transparent huge pages that have been entirely transferred
and don't contain any discards are not broken by this mechanism;
they stay as huge pages.
By starting postcopy after a full precopy pass, many of the pages
then stay as huge pages; this is important for maintaining performance
after the end of the migration.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wire up more of the handlers for the commands on the destination side,
in particular loadvm_postcopy_handle_run now has enough to start the
guest running.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The loading of a device state (during postcopy) may access guest
memory that's still on the source machine and thus might need
a page fill; split off a separate thread that handles the incoming
page data so that the original incoming migration code can finish
off the device data.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
userfaultfd is a Linux syscall that gives an fd that receives a stream
of notifications of accesses to pages registered with it and allows
the program to acknowledge those stalls and tell the accessing
thread to carry on.
We convert the requests from the kernel into messages back to the
source asking for the pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy, the destination guest is running at the same time
as it's receiving pages; as we receive new pages we must put
them into the guests address space atomically to avoid a running
CPU accessing a partially written page.
Use the helpers in postcopy-ram.c to map these pages.
qemu_get_buffer_in_place is used to avoid a copy out of qemu_file
in the case that postcopy is going to do a copy anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy_place_page (etc) provide a way for postcopy to place a page
into guests memory atomically (using the copy ioctl on the ufd).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When transmitting RAM pages, consume pages that have been queued by
MIG_RPCOMM_REQPAGE commands and send them ahead of normal page scanning.
Note:
a) After a queued page the linear walk carries on from after the
unqueued page; there is a reasonable chance that the destination
was about to ask for other closeby pages anyway.
b) We have to be careful of any assumptions that the page walking
code makes, in particular it does some short cuts on its first linear
walk that break as soon as we do a queued page.
c) We have to be careful to not break up host-page size chunks, since
this makes it harder to place the pages on the destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On receiving MIG_RPCOMM_REQ_PAGES look up the address and
queue the page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add MIG_RP_MSG_REQ_PAGES command on Return path for the postcopy
destination to request a page from the source.
Two versions exist:
MIG_RP_MSG_REQ_PAGES_ID that includes a RAMBlock name and start/len
MIG_RP_MSG_REQ_PAGES that just has start/len for use with the same
RAMBlock as a previous MIG_RP_MSG_REQ_PAGES_ID
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The end of migration in postcopy is a bit different since some of
the things normally done at the end of migration have already been
done on the transition to postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rework the migration thread to setup and start postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we
complete migration, and we need to know which we expect to be
in to change state safely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'MIGRATION_STATUS_POSTCOPY_ACTIVE' is entered after migrate_start_postcopy
'migration_in_postcopy' is provided for other sections to know if
they're in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Modify save_live_pending to return separate postcopiable and
non-postcopiable counts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
MIG_CMD_PACKAGED is a migration command that wraps a chunk of migration
stream inside a package whose length can be determined purely by reading
its header. The destination guarantees that the whole MIG_CMD_PACKAGED
is read off the stream prior to parsing the contents.
This is used by postcopy to load device state (from the package)
while leaving the main stream free to receive memory pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The state of the postcopy process is managed via a series of messages;
* Add wrappers and handlers for sending/receiving these messages
* Add state variable that track the current state of postcopy
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs to have two migration streams loading concurrently;
one from memory (with the device state) and the other from the fd
with the memory transactions.
Split the core of qemu_loadvm_state out so we can use it for both.
Allow the inner loadvm loop to quit and cause the parent loops to
exit as well.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Open a return path, and handle messages that are received upon it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add migrate_send_rp_message to send a message from destination to source along the return path.
(It uses a mutex to let it be called from multiple threads)
Add migrate_send_rp_shut to send a 'shut' message to indicate
the destination is finished with the RP.
Add migrate_send_rp_ack to send a 'PONG' message in response to a PING
Use it in the MSG_RP_PING handler
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two src->dest commands:
* OPEN_RETURN_PATH - To request that the destination open the return path
* PING - Request an acknowledge from the destination
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create QEMU_VM_COMMAND section type for sending commands from
source to destination. These commands are not intended to convey
guest state but to control the migration process.
For use in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-7-git-send-email-kraxel@redhat.com
These messages are disabled by default; a perfect usecase for tracepoints,
which in fact already exist. Add the missing information to them and
stop using qemu_log_mask.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
The event throttling state machine is hard to understand. I'm not
sure it's entirely correct. Rewrite it in a more straightforward
manner:
State 1: No event sent recently (less than evconf->rate ns ago)
Invariant: evstate->timer is not pending, evstate->qdict is null
On event: send event, arm timer, goto state 2
State 2: Event sent recently, no additional event being delayed
Invariant: evstate->timer is pending, evstate->qdict is null
On event: store it in evstate->qdict, goto state 3
On timer: goto state 1
State 3: Event sent recently, additional event being delayed
Invariant: evstate->timer is pending, evstate->qdict is non-null
On event: store it in evstate->qdict, goto state 3
On timer: send evstate->qdict, clear evstate->qdict,
arm timer, goto state 2
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444921716-9511-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
These messages are disabled by default; a perfect usecase for tracepoints.
Convert them over.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace error_report() and use tracing instead. It's not an error to get
a connection or a disconnection, so silence this and trace it instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
The malloc vtable is not supported anymore in glib, because it broke
when constructors called g_malloc. Remove tracing of g_malloc,
g_realloc and g_free calls.
Note that, for systemtap users, glib also provides tracepoints
glib.mem_alloc, glib.mem_free, glib.mem_realloc, glib.slice_alloc
and glib.slice_free.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1442417924-25831-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add virglrenderer library detection. Add 3d mode to virtio-gpu,
wire up virglrenderer library. When in 3d mode render using the
new context management and texture scanout callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In irqfd mode, current code attempts to set a resamplefd whatever
the type of the IRQ. For an edge-sensitive IRQ this attempt fails
and as a consequence, the whole irqfd setup fails and we fall back
to the slow mode. This patch bypasses the resamplefd setting for
non level-sentive IRQs.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a start on using size_t more in qemu-file and friends;
it fixes up QEMUFilePutBufferFunc and QEMUFileGetBufferFunc
to take size_t lengths and return ssize_t return values (like read(2))
and fixes up all the different implementations of them.
Note that I've not yet followed this deeply into bdrv_ implementations.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-5-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The code that gets run at the end of the migration process
is getting large, and I'm about to add more for postcopy.
Split it into a separate function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-3-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
In some cases, we need to disable copy-on-read, and just
read the data.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Message-id: 1441682913-14320-2-git-send-email-wency@cn.fujitsu.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Specifying an emulated PCI vendor/device ID can be useful for testing
various quirk paths, even though the behavior and functionality of
the device with bogus IDs is fully unsupportable. We need to use a
uint32_t for the vendor/device IDs, even though the registers
themselves are only 16-bit in order to be able to determine whether
the value is valid and user set.
The same support is added for subsystem vendor/device ID, though these
have the possibility of being useful and supported for more than a
testing tool. An emulated platform might want to impose their own
subsystem IDs or at least hide the physical subsystem ID. Windows
guests will often reinstall drivers due to a change in subsystem IDs,
something that VM users may want to avoid. Of course careful
attention would be required to ensure that guest drivers do not rely
on the subsystem ID as a basis for device driver quirks.
All of these options are added using the standard experimental option
prefix and should not be considered stable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is just another quirk, for reset rather than affecting memory
regions. Move it to our new quirks file.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Config windows make use of an address register and a data register.
In VGA cards, these are often used to provide real mode code in the
BIOS an easy way to access MMIO registers since the window often
resides in an I/O port register. When the MMIO register has a mirror
of PCI config space, we need to trap those accesses and redirect them
to emulated config space.
The previous version of this functionality made use of a single
MemoryRegion and single match address. This version uses separate
MemoryRegions for each of the address and data registers and allows
for multiple match addresses. This is useful for Nvidia cards which
have two ranges which index into PCI config space.
The previous implementation is left for the follow-on patch for a more
reviewable diff.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Another rework of this quirk, this time to update to the new quirk
structure. We can handle the address and data registers with
separate MemoryRegions and a quirk specific data structure, making the
code much more understandable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The Nvidia 0x3d0 quirk makes use of a two separate registers and gives
us our first chance to make use of separate memory regions for each to
simplify the code a bit.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is an easy quirk that really doesn't need a data structure if
its own. We can pass vdev as the opaque data and access to the
MemoryRegion isn't required.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Create a vendor:device ID helper that we'll also use as we rework the
rest of the quirks. Re-reading the config entries, even if we get
more blacklist entries, is trivial overhead and only incurred during
device setup. There's no need to typedef the blacklist structure,
it's a static private data type used once. The elements get bumped
up to uint32_t to avoid future maintenance issues if PCI_ANY_ID gets
used for a blacklist entry (avoiding an actual hardware match). Our
test loop is also crying out to be simplified as a for loop.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This allows vfio_msi* tracing. The MSI/X interrupt tracing is also
pulled out of #ifdef DEBUG_VFIO to avoid a recompile for tracing this
path. A few cycles to read the message is hardly anything if we're
already in QEMU.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Rename functions and tracing callbacks so that we can trace vfio_intx*
to see all the INTx related activities.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's quite a bit of cleanup that can be done to the RTL8168 quirk,
as well as the tracing to prevent a spew of uninteresting accesses
for anything else the driver might choose to use the window registers
for besides the MSI-X table. There should be no functional change,
but it's now possible to get compact and useful traces by enabling
vfio_rtl8168_quirk*, ex:
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f000
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f000
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0xfee0100c
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f004
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f004
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f008
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f008
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x49b1
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6TWk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/vnc-crypto-v9-for-upstream' into staging
Merge vnc-crypto-v9
# gpg: Signature made Tue 15 Sep 2015 15:32:38 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/vnc-crypto-v9-for-upstream:
ui: convert VNC server to use QCryptoTLSSession
ui: fix return type for VNC I/O functions to be ssize_t
crypto: introduce new module for handling TLS sessions
crypto: add sanity checking of TLS x509 credentials
crypto: introduce new module for TLS x509 credentials
crypto: introduce new module for TLS anonymous credentials
crypto: introduce new base module for TLS credentials
qom: allow QOM to be linked into tools binaries
crypto: move crypto objects out of libqemuutil.la
tests: remove repetition in unit test object deps
qapi: allow override of default enum prefix naming
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics
Example CLI configuration:
$QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
dir=/path/to/creds/dir,verify-peer=yes
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-x509,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.
Simple example CLI configuration:
$QEMU -object tls-creds-anon,id=tls0,endpoint=server
Example using pre-created diffie-hellman parameters
$QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
dir=/path/to/creds/dir
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-anon,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.
If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.
The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.
The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a reason to grab calls and trace points,
so it is easier to debug grab related ui issues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=7+ii
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' into staging
xen-2015-09-10
# gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits)
xen/pt: Don't slurp wholesale the PCI configuration registers
xen/pt: Check for return values for xen_host_pci_[get|set] in init
xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
xen/pt: Make xen_pt_unregister_device idempotent
xen/pt: Log xen_host_pci_get/set errors in MSI code.
xen/pt: Log xen_host_pci_get in two init functions
xen/pt: Remove XenPTReg->data field.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
xen/pt: Sync up the dev.config and data values.
xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
xen/pt/msi: Add the register value when printing logging and error messages
xen: use errno instead of rc for xc_domain_add_to_physmap
xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
xen/pt: Make xen_pt_msi_set_enable static
xen/pt: Update comments with proper function name.
xen/HVM: atomically access pointers in bufioreq handling
xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
xen, gfx passthrough: add opregion mapping
xen, gfx passthrough: register host bridge specific to passthrough
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current trace prototypes and (matching) trace calls lead to
"unorthodox" PCI BDF notation in at least the stderr trace backend. For
example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1,
function 0) are traced like this (PID and timestamps removed):
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20
The slot and function values are in reverse order.
Stick with the conventional BDF notation.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Don Koch <dkoch@verizon.com>
Cc: qemu-trivial@nongnu.org
Fixes: 7828d75045
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
s390 guest initialization is modified to make use of new s390-storage-keys
device. Old code that globally allocated storage key array is removed.
The new device enables storage key access for kvm guests.
Cache storage key QOM objects in frequently used helper functions to avoid a
performance hit every time we use one of these functions.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If mirror has more free buffers than IOV_MAX, preadv(2)/pwritev(2)
EINVAL failures may be encountered.
It is possible to trigger this by setting granularity to a low value
like 8192.
This patch stops appending chunks once IOV_MAX is reached.
The spurious EINVAL failure can be reproduced with a qcow2 image file
and the following QMP invocation:
qmp.command('drive-mirror', device='virtio0', target='/tmp/r7.s1',
granularity=8192, sync='full', mode='absolute-paths',
format='raw')
While the guest is running dd if=/dev/zero of=/var/tmp/foo oflag=direct
bs=4k.
Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435761950-26714-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Drop .can_receive and move the semantics into minimac2_rx, by returning
0.
That is once minimac2_rx returns 0, incoming packets will be queued
until the queue is explicitly flushed. We do this when s->regs[R_STATE0]
or s->regs[R_STATE1] is changed in minimac2_write.
Also drop the unused trace point.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436955553-22791-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To make sections optional, we need to do it at the beggining of the code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This includes a new section that for now just stores the current qemu state.
Right now, there are only one way to control what is the state of the
target after migration.
- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.
The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO. Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the order of incoming RAMBlocks from the source to record
an index number; that then allows us to sort the destination
local RAMBlock list to match the source.
Now that the RAMBlocks are known to be in the same order, this
simplifies the RDMA Registration step which previously tried to
match RAMBlocks based on offset (which isn't guaranteed to match).
Looking at the existing compress code, I think it was erroneously
relying on an assumption of matching ordering, which this fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the next patch we remove the hash on the destination,
rdma_delete_block does two things with the hash which can be avoided:
a) The caller passes the offset and rdma_delete_block looks it up
in the hash; fixed by getting the caller to pass the block
b) The hash gets recreated after deletion; fixed by making that
conditional on the hash being initialised.
While this function is currently only used during cleanup, Michael
asked that we keep it general for future dynamic block registration
work.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need the names of RAMBlocks as they're loaded for RDMA,
reuse a slightly modified ram_control_load_hook:
a) Pass a 'data' parameter to use for the name in the block-reg
case
b) Only some hook types now require the presence of a hook function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In a later patch the block name will be used to match up two views
of the block list. Keep a copy of the block name with the local block
list.
(At some point it could be argued that it would be best just to let
migration see the innards of RAMBlock and avoid the need to use
foreach).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch aims at optimizing IRQ handling using irqfd framework.
Instead of handling the eventfds on user-side they are handled on
kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.
the virtual IRQ completion is trapped at interrupt controller
This removes the need for fast/slow path swap.
Overall this brings significant performance improvements.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJVeppzAAoJEFIRjjwLKdprnk8H/1owSOreh0sMFbosvqlEhjXl
lvjjuprWMdX+8M1JlaDvTbw6+LDB3Rihp3A6/I9A0GFiZaORmPzg7efULAI1H6ST
0HfxMAO17eW+PJ3lvk0HidNDr01+RzTvwpizrHgQ9WJubJv0xREU+YG5yn1gPS4N
aMMTKCAQFDba7iQQLKXUYvLz76+xyzW4VIvHVLx/SU86yPg9T7CwLpppipR8+zY5
3BC4NUw/xLlS0LCYQGM8XmYgBiQ6lEAz/Y29bGlUg+LeYysjSgNSeoNbOs1M3kQp
X0Hn7b28I1CjM2wZQ9GkT/ig+jhMvw27motnAe8vKood4ytfcor+dCCS13sE8fg=
=F564
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150612' into staging
MIPS patches 2015-06-12
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
# gpg: Signature made Fri Jun 12 09:38:11 2015 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B
* remotes/lalrae/tags/mips-20150612: (29 commits)
target-mips: enable XPA and LPA features
target-mips: remove misleading comments in translate_init.c
target-mips: add MTHC0 and MFHC0 instructions
target-mips: add CP0.PageGrain.ELPA support
target-mips: support Page Frame Number Extension field
target-mips: extend selected CP0 registers to 64-bits in MIPS32
target-mips: correct MFC0 for CP0.EntryLo in MIPS64
net/dp8393x: fix hardware reset
net/dp8393x: correctly reset in_use field
net/dp8393x: add load/save support
net/dp8393x: add PROM to store MAC address
net/dp8393x: QOM'ify
net/dp8393x: use dp8393x_ prefix for all functions
net/dp8393x: do not use old_mmio accesses
net/dp8393x: always calculate proper checksums
dma/rc4030: convert to QOM
dma/rc4030: use trace events instead of custom logging
dma/rc4030: document register at offset 0x210
dma/rc4030: do not use old_mmio accesses
dma/rc4030: use AddressSpace and address_space_rw in users
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split qemu_savevm_state_begin to:
qemu_savevm_state_header That writes the initial file header.
qemu_savevm_state_begin That sets up devices and does the first
device pass.
Used later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds the core code for virtio gpu emulation,
covering 2d support.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Exit with an error (instead of simply logging a trace event)
whenever the same fw_cfg file name is added multiple times via
one of the fw_cfg_add_file[_callback]() host-side API calls.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
From this point forward, any guest-side writes to the fw_cfg
data register will be treated as no-ops. This patch also removes
the unused host-side API function fw_cfg_add_callback(), which
allowed the registration of a callback to be executed each time
the guest completed a full overwrite of a given fw_cfg data item.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds the code requested to assign interrupts to
a guest. The interrupts are mediated through user handled
eventfds only.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
