Don't attempt to remove /dev/fdset files.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The file opened for ppm_save() may be a /dev/fdset, in which case a
dup fd is added to the fdset. It should be removed by calling
qemu_close(), instead of the implicit close() on fclose().
I don't see a convenient way to solve that with stdio streams, so I
switched the code to QIOChannel which uses qemu_close().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow to pre-open the file before running the async finish
handler and avoid potential monitor fdset races.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a function to be called when a graphic update is done.
Declare the QXL renderer as async: render_update_cookie_num counts the
number of outstanding updates, and graphic_hw_update_done() is called
when it reaches none.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need Error **, as all callers pass local Error object, which
isn't used after the call, or NULL. Use Error * instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-6-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we try to start QEMU with "-k en-us", qemu prints a message and exits
with:
qemu-system-i386: could not read keymap file: 'en-us'
It's because this function is called way too early, before
qemu_add_data_dir() is called, and so qemu_find_file() fails.
To fix that, move init_keyboard_layout() from the class init function to the
instance init function.
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190923220658.27007-1-laurent@vivier.eu
Fixes: 6105683da3 ("ui: add an embedded Barrier client")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current code does not correctly pass the color pair information to
setcchar(), it instead always passes zero. This results in the curses
output always being in white on black.
This patch fixes this by using PAIR_NUMBER() to retrieve the color pair
number from the chtype value, and then passes that value as an argument
to setcchar().
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-3-mattkilgore12@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The curses API provides the A_ATTRIBUTES and A_CHARTEXT bit masks for
getting the attributes and character parts of a chtype, respectively. We
should use provided constants instead of using 0xff.
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-2-mattkilgore12@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
macOS API documentation says that before applicationDidFinishLaunching
is called, any events will not be processed. However, some events are
fired before it is called in macOS Catalina. This causes deadlock of
iothread_lock in handleEvent while it will be released after the
app_started_sem is posted.
This patch avoids processing events before the app_started_sem is
posted to prevent this deadlock.
Buglink: https://bugs.launchpad.net/qemu/+bug/1847906
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-id: 20191015010734.85229-1-hikarupsp@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when qemu receives a vnc connect, it creates a 'VncState' to
represent this connection. In 'vnc_worker_thread_loop' it creates a
local 'VncState'. The connection 'VcnState' and local 'VncState' exchange
data in 'vnc_async_encoding_start' and 'vnc_async_encoding_end'.
In 'zrle_compress_data' it calls 'deflateInit2' to allocate the libz library
opaque data. The 'VncState' used in 'zrle_compress_data' is the local
'VncState'. In 'vnc_zrle_clear' it calls 'deflateEnd' to free the libz
library opaque data. The 'VncState' used in 'vnc_zrle_clear' is the connection
'VncState'. In currently implementation there will be a memory leak when the
vnc disconnect. Following is the asan output backtrack:
Direct leak of 29760 byte(s) in 5 object(s) allocated from:
0 0xffffa67ef3c3 in __interceptor_calloc (/lib64/libasan.so.4+0xd33c3)
1 0xffffa65071cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
2 0xffffa5e968f7 in deflateInit2_ (/lib64/libz.so.1+0x78f7)
3 0xaaaacec58613 in zrle_compress_data ui/vnc-enc-zrle.c:87
4 0xaaaacec58613 in zrle_send_framebuffer_update ui/vnc-enc-zrle.c:344
5 0xaaaacec34e77 in vnc_send_framebuffer_update ui/vnc.c:919
6 0xaaaacec5e023 in vnc_worker_thread_loop ui/vnc-jobs.c:271
7 0xaaaacec5e5e7 in vnc_worker_thread ui/vnc-jobs.c:340
8 0xaaaacee4d3c3 in qemu_thread_start util/qemu-thread-posix.c:502
9 0xffffa544e8bb in start_thread (/lib64/libpthread.so.0+0x78bb)
10 0xffffa53965cb in thread_start (/lib64/libc.so.6+0xd55cb)
This is because the opaque allocated in 'deflateInit2' is not freed in
'deflateEnd'. The reason is that the 'deflateEnd' calls 'deflateStateCheck'
and in the latter will check whether 's->strm != strm'(libz's data structure).
This check will be true so in 'deflateEnd' it just return 'Z_STREAM_ERROR' and
not free the data allocated in 'deflateInit2'.
The reason this happens is that the 'VncState' contains the whole 'VncZrle',
so when calling 'deflateInit2', the 's->strm' will be the local address.
So 's->strm != strm' will be true.
To fix this issue, we need to make 'zrle' of 'VncState' to be a pointer.
Then the connection 'VncState' and local 'VncState' exchange mechanism will
work as expection. The 'tight' of 'VncState' has the same issue, let's also turn
it to a pointer.
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-id: 20190831153922.121308-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows to receive mouse and keyboard events from
a Barrier server.
This is enabled by adding the following parameter on the
command line
... -object input-barrier,id=$id,name=$name ...
Where $name is the name declared in the screens section of barrier.conf
The barrier server (barriers) must be configured and must run on the
local host.
For instance:
section: screens
localhost:
...
VM-1:
...
end
section: links
localhost:
right = VM-1
VM-1:
left = localhost
end
Then on the QEMU command line:
... -object input-barrier,id=barrie0,name=VM-1 ...
When the mouse will move out of the screen of the local host on
the right, the mouse and the keyboard will be grabbed and all
related events will be send to the guest OS.
This is usefull when qemu is configured without emulated graphic card
but with a VFIO attached graphic card.
More information about Barrier can be found at:
https://github.com/debauchee/barrier
This avoids to install the Barrier server in the guest OS,
for instance when it is not supported or during the installation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190906083812.29487-1-laurent@vivier.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix egl_fb_read() to use the (destination) surface size instead of the
(source) framebuffer source for glReadPixels. Pass the DisplaySurface
instead of the pixeldata pointer to egl_fb_read() to make this possible.
With that in place framebuffer reads work fine even if the surface and
framebuffer sizes don't match, so we can remove the guest-triggerable
asserts in egl_scanout_flush().
Buglink: https://bugzilla.redhat.com//show_bug.cgi?id=1749659
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190909073911.24787-1-kraxel@redhat.com
This reverts commit 45db1ac157 ("modules-test: ui-spice-app is not
built as module") and fixes commit d8aec9d9f1 ("display: add -display
spice-app launching a Spice client").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190827140241.20818-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
We have ctrl-ctrl and alt-alt; why not shift-shift? That's my preferred
grab binding, personally.
Signed-off-by: Niklas Haas <git@haasn.xyz>
Message-id: 20190818105038.19520-1-qemu@haasn.xyz
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This prevents the compiler from reporting a possible uninitialized use
of maybe_keycode in function curses_refresh.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1563451264-46176-1-git-send-email-pbonzini@redhat.com
[ kraxel: whitespace fixup ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio functions no longer access glob_audio_state, instead they get an
AudioState as a parameter. This is required in order to support
multiple backends.
glob_audio_state is also gone, and replaced with a tailq so we can store
more than one states.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 67aef54f9e729a7160fe95c465351115e392164b.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
docs/devel/tracing.txt explains "since many source files include
trace.h, [the generated trace.h use] a minimum of types and other
header files included to keep the namespace clean and compile times
and dependencies down."
Commit 4815185902 "trace: Add per-vCPU tracing states for events with
the 'vcpu' property" made them all include qom/cpu.h via
control-internal.h. qom/cpu.h in turn includes about thirty headers.
Ouch.
Per-vCPU tracing is currently not supported in sub-directories'
trace-events. In other words, qom/cpu.h can only be used in
trace-root.h, not in any trace.h.
Split trace/control-vcpu.h off trace/control.h and
trace/control-internal.h. Have the generated trace.h include
trace/control.h (which no longer includes qom/cpu.h), and trace-root.h
include trace/control-vcpu.h (which includes it).
The resulting improvement is a bit disappointing: in my "build
everything" tree, some 1100 out of 6600 objects (not counting tests
and objects that don't depend on qemu/osdep.h) depend on a trace.h,
and about 600 of them no longer depend on qom/cpu.h. But more than
1300 others depend on trace-root.h. More work is clearly needed.
Left for another day.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-8-armbru@redhat.com>
Some of the generated qapi-types-MODULE.h are included all over the
place. Changing a QAPI type can trigger massive recompiling. Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):
6300 qapi/qapi-builtin-types.h
5700 qapi/qapi-types-run-state.h
3900 qapi/qapi-types-common.h
3300 qapi/qapi-types-sockets.h
3000 qapi/qapi-types-misc.h
3000 qapi/qapi-types-crypto.h
3000 qapi/qapi-types-job.h
3000 qapi/qapi-types-block-core.h
2800 qapi/qapi-types-block.h
1300 qapi/qapi-types-net.h
Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.
This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h. They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO(). Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles. This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.
Improves things for some of the top scorers:
3600 qapi/qapi-types-common.h
2800 qapi/qapi-types-sockets.h
900 qapi/qapi-types-misc.h
2200 qapi/qapi-types-crypto.h
2100 qapi/qapi-types-job.h
2100 qapi/qapi-types-block-core.h
270 qapi/qapi-types-block.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
Linux terminal behavior (coming from vt100 I think) is somewhat strange
when it comes to line wraps: When a character is printed to the last
char cell of a line the cursor does NOT jump to the next line but stays
where it is. The line feed happens when the next character is printed.
So the valid range for the cursor position is not 0 .. width-1 but
0 .. width, where x == width represents the state where the line is
full but the cursor didn't jump to the next line yet.
The code for the 'clear from start of line' control sequence (ESC[1K)
fails to handle this corner case correctly and may call
console_clear_xy() with x == width. That will incorrectly clear the
first char cell of the next line, or in case the cursor happens to be on
the last line overflow the cell buffer by one character (three bytes).
Add a check to the loop to fix that.
Didn't spot any other places with the same problem. But it's easy to
miss that corner case, so also allocate one extra cell as precaution, so
in case we have simliar issues lurking elsewhere it at least wouldn't be
a buffer overflow.
v2: squashed in additional checks suggested by Christophe de Dinechin.
Reported-by: Alexander Oleinik <alxndr@bu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Message-id: 20190701075301.14165-1-kraxel@redhat.com
In fullscreen mode, the window property of cocoaView may not be the key
window, and the current implementation would not re-grab cursor by left click
in fullscreen mode after ungrabbed in fullscreen mode with hot-key ctrl-opt-g.
This patch used value of isFullscreen as a short-cirtuit condition for
relative input device grabbing.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2D2F1191-E82F-4B54-A6E7-73FFB953DE93@me.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Mojave, absolute input device, i.e. tablet, had trouble re-grabbing
the cursor in re-entry into the virtual screen area. In some cases,
the `window` property of NSEvent object was nil after cursor exiting from
window, hinting that the `-locationInWindow` method would return value in
screen coordinates. The current implementation used raw locations from
NSEvent without considering whether the value was for the window coordinates
or the macOS screen coordinates, nor the zooming factor for Zoom-to-Fit in
fullscreen mode.
In fullscreen mode, the fullscreen cocoa window might not be the key
window, therefore the location of event in virtual coordinates should
suffice.
This patches fixed boundary check methods for cursor in normal
and fullscreen with/without Zoom-to-Fit in Mojave.
Note: CGRect, -convertRectToScreen: and -convertRectFromScreen: were
used in coordinates conversion for compatibility reason.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: FA3FBC4F-5379-4118-B997-58FE05CC58F9@me.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Check and use QemuDmaBuf->modifier in egl_dmabuf_import_texture()
for dmabuf imports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190529072144.26737-5-kraxel@redhat.com
Add modifier parameter to egl_get_fd_for_texture(), to return the used
modifier on dmabuf exports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190529072144.26737-4-kraxel@redhat.com
wchar_t may resolve to be an unsigned long on 32-bit architectures.
Using the %x conversion specifier will then give a compiler warning:
ui/curses.c: In function ‘get_ucs’:
ui/curses.c:492:49: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘wchar_t’ {aka ‘long int’} [-Werror=format=]
492 | fprintf(stderr, "Could not convert 0x%04x "
| ~~~^
| |
| unsigned int
| %04lx
493 | "from wchar_t to a multibyte character: %s\n",
494 | wch, strerror(errno));
| ~~~
| |
| wchar_t {aka long int}
ui/curses.c:504:49: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘wchar_t’ {aka ‘long int’} [-Werror=format=]
504 | fprintf(stderr, "Could not convert 0x%04x "
| ~~~^
| |
| unsigned int
| %04lx
505 | "from a multibyte character to UCS-2 : %s\n",
506 | wch, strerror(errno));
| ~~~
| |
| wchar_t {aka long int}
Fix this by casting the wchar_t value to an unsigned long and using %lx
as the conversion specifier.
Fixes: b7b664a4fe
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20190527142540.23255-1-mreitz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use a better interface for random numbers than rand().
Fail gracefully if for some reason we cannot use the crypto system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were 3 copies of this code, one of which used the wrong
data size for the failure indicator.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When allowing multiple down-events in a row (key autorepeat) we can't
use change_bit() any more to update the state, because autorepeat events
don't change the key state. We have to explicitly use set_bit() and
clear_bit() instead.
Cc: qemu-stable@nongnu.org
Fixes: 3592186015 kbd-state: don't block auto-repeat events
Buglink: https://bugs.launchpad.net/qemu/+bug/1828272
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190514042443.10735-1-kraxel@redhat.com
In a GVT-g setup with dmabuf and GTK GUI, the current 2D texture at
surface_gl_update_texture is not necessarily
surface->texture. Adding a glBindTexture fixes related crashes and
artifacts, and is generally more secure.
Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Tested-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190507080501.26712-1-marcel.apfelbaum@gmail.com
[fixed malformed patch, rebase to master]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The chars/attr fields are curses internals, setcchar and getcchar have
to be used instead.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190427183307.12796-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
E.g. BSD and Solaris even use locale-specific encoding there.
We thus have to go through the native multibyte representation and use
mbrtowc/wcrtomb to make a proper conversion.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190427183307.12796-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On some systems wchar_t is "long int", on others just "int".
So go cast to "long int" and adjust the printf format accordingly.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190402073018.17747-1-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The iconv_t are opened but never closed.
Spotted by Coverity: CID 1399708
Spotted by Coverity: CID 1399709
Spotted by Coverity: CID 1399713
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190314172524.9290-1-samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
cchar_t can contain not only attr and chars fields, but also ext_color.
Initialize the whole structure to zero instead of enumerating fields.
Spotted by Coverity: CID 1399711
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190315130932.26094-1-samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When adding '-fsanitize=undefined' in compiling configuration
and connect VM with vnc, it reports following error:
ui/vnc-enc-tight.c:910:13: runtime error: load of
misaligned address 0x621000466513 for type 'uint32_t',
which requires 4 byte alignment
This patch fix this issue.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-id: 20190318010442.14897-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This uses iconv to convert glyphs from the specified VGA font encoding to
unicode, and makes use of cchar_t instead of chtype when using ncursesw,
which allows to store all wide char as well as the WACS values. The default
charset is made CP437 since that is the charset of the hardware default VGA
font. This also makes the curses backend set the LC_CTYPE locale to "" to
allow curses to emit wide characters.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Eddie Kohler <ekohler@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190311135127.2229-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
curses will use it for proper wide output support.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190311135127.2229-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server has historically had support for ACLs to check both the
SASL username and the TLS x509 distinguished name. The VNC server was
responsible for creating the initial ACL, and the client app was then
responsible for populating it with rules using the HMP 'acl_add' command.
This is not satisfactory for a variety of reasons. There is no way to
populate the ACLs from the command line, users are forced to use the
HMP. With multiple network services all supporting TLS and ACLs now, it
is desirable to be able to define a single ACL that is referenced by all
services.
To address these limitations, two new options are added to the VNC
server CLI. The 'tls-authz' option takes the ID of a QAuthZ object to
use for checking TLS x509 distinguished names, and the 'sasl-authz'
option takes the ID of another object to use for checking SASL usernames.
In this example, we setup two authorization rules. The first allows any
client with a certificate issued by the 'RedHat' organization in the
'London' locality. The second ACL allows clients with either the
'joe@REDHAT.COM' or 'fred@REDHAT.COM' kerberos usernames. Both checks
must pass for the user to be allowed.
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-simple,id=authz0,policy=deny,\
rules.0.match=O=RedHat,,L=London,rules.0.policy=allow \
-object authz-simple,id=authz1,policy=deny,\
rules.0.match=fred@REDHAT.COM,rules.0.policy=allow \
rules.0.match=joe@REDHAT.COM,rules.0.policy=allow \
-vnc 0.0.0.0:1,tls-creds=tls0,tls-authz=authz0,
sasl,sasl-authz=authz1 \
...other QEMU args...
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20190227145755.26556-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc aborts display update jobs on video mode switches and page flips.
That can cause vnc update stalls in case an unfinished vnc job gets
aborted. The vnc client will never receive the requested update then.
Fix that by copying the state from job_update back to update in that
case.
Reports complain about stalls with two or more clients being connected
at the same time, on some but not all connections. I suspect it can
also happen with a single connection, multiple connections only make
this more much likely to happen.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1662260
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ying Fang <fangying1@huawei.com>
Message-id: 20190305130930.24516-1-kraxel@redhat.com
This makes use of wide curses functions instead of 8bit functions. This
allows to type e.g. accented letters.
Unfortunately, key codes are then returned with values that could be
confused with wide characters by ncurses, so we need to add a maybe_keycode
variable to know whether the returned value is a key code or a character
(curses with wide support), or possibly both (curses without wide support).
The translation tables thus also need to be separated into key code
translation and character translation. The curses2foo helper makes it easier
to use them.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20190304210532.7840-1-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
By default, curses will only report single ESC key event after 1s delay,
since ESC is also used for keypad escape sequences. This however makes
users believe that ESC is not working. Reducing to 25ms provides good user
experience, while still allowing 25ms for keypad sequences to get in, which
should be enough.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190303172557.17139-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OSX Mojave release is more picky about enforcing the Cocoa API
restriction that only the main thread may perform UI calls. To
accommodate this we need to restructure the Cocoa code:
* the special OSX main() creates a second thread and uses
that to call the vl.c qemu_main(); the original main
thread goes into the OSX event loop
* the refresh, switch and update callbacks asynchronously
tell the main thread to do the necessary work
* the refresh callback no longer does the "get events from the
UI event queue and handle them" loop, since we now use
the stock OSX event loop. Instead our NSApplication sendEvent
method will either deal with them or pass them on to OSX
All these things have to be changed in one commit, to avoid
breaking bisection.
Note that since we use dispatch_get_main_queue(), this bumps
our minimum version requirement to OSX 10.10 Yosemite (released
in 2014, unsupported by Apple since 2017).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-8-peter.maydell@linaro.org
Message-id: 20190214102816.3393-8-peter.maydell@linaro.org
When we switch away from our custom event handling, we still want to
be able to have first go at any events our application receives,
because in full-screen mode we want to send key events to the guest,
even if they would be menu item activation events. There are several
ways we could do that, but one simple approach is to subclass
NSApplication so we can implement a custom sendEvent method.
Do that, but for the moment have our sendEvent just invoke the
superclass method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-7-peter.maydell@linaro.org
Message-id: 20190214102816.3393-7-peter.maydell@linaro.org
Currently the handleEvent method will directly call the NSApp
sendEvent method for any events that we want to let OSX deal
with. When we rearrange the event handling code, the way that
we say "let OSX have this event" is going to change. Prepare
for that by refactoring so that handleEvent returns a flag
indicating whether it consumed the event.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-6-peter.maydell@linaro.org
Message-id: 20190214102816.3393-6-peter.maydell@linaro.org
Move the console/device menu creation code functions
further up in the source file, next to the code which
creates the initial menus. We're going to want to
change the location we call these functions from in
the next patch.
This commit is a pure code move with no other changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-5-peter.maydell@linaro.org
Message-id: 20190214102816.3393-5-peter.maydell@linaro.org
Factor out the long code sequence in main() which creates
the initial set of menus. This will make later patches
which move initialization code around a bit clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-4-peter.maydell@linaro.org
Message-id: 20190214102816.3393-4-peter.maydell@linaro.org
Currently the switchSurface method takes a DisplaySurface. We want
to change our DisplayChangeListener's dpy_gfx_switch callback
to do this work asynchronously on a different thread. The caller
of the switch callback will free the old DisplaySurface
immediately the callback returns, so to ensure that the
other thread doesn't access freed data we need to switch
to using the underlying pixman image instead. The pixman
image is reference counted, so we will be able to take
a reference to it to avoid it vanishing too early.
In this commit we only change the switchSurface method
to take a pixman image, and keep the flow of control
synchronous for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-3-peter.maydell@linaro.org
Message-id: 20190214102816.3393-3-peter.maydell@linaro.org
The Cocoa UI should run on the main thread; this is enforced
in OSX Mojave. In order to be able to run on the main thread,
we need to make sure we hold the iothread lock whenever we
call into various QEMU UI midlayer functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-2-peter.maydell@linaro.org
Message-id: 20190214102816.3393-2-peter.maydell@linaro.org
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new display backend that will configure Spice to allow a remote
client to control QEMU in a similar fashion as other QEMU display
backend/UI like GTK.
For this to work, it will set up Spice server with a unix socket, and
register a VC chardev that will be exposed as Spice ports. A QMP
monitor is also exposed as a Spice port, this allows the remote client
fuller qemu control and state handling.
- doesn't handle VC set_echo() - this doesn't seem a strong
requirement, very few front-end use it
- spice options can be tweaked with other -spice arguments
- Windows support shouldn't be hard to do, but will probably use a TCP
port instead
- we may want to watch the child process to quit automatically if it
crashed
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-12-marcandre.lureau@redhat.com
[ kraxel: squash incremental fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If no -name is given, let's use a friendly "QEMU version" server
name. This is sometime exposed on spice client side, for example on
remote-viewer title.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-11-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
spice_server_vm_start/stop() was added to help migration state (commit
f5bb039c6d).
However, a paused VM could keep running the spice server. This will
allow a Spice client to keep sending commands to a spice chardev. This
allows to stop/cont a VM from a Spice monitor port. Character
devices (vdagent/usb/smartcard/..) should not read from Spice when the
VM is paused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Passing several -spice options to qemu command line, or calling
several time qemu_opts_set() will ignore all but the first option
list. Since the spice server is a singleton, it makes sense to merge
all the options, the last value being the one taken into account.
This changes the behaviour from, for ex:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5900
to:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5901
(if necessary we could instead produce an error when an option is
given twice, although this makes handling default values and such more
complicated)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Spice server doesn't like to be started or stopped twice . It
aborts with:
(process:6191): Spice-ERROR **: 19:29:35.912: red-worker.c:623:handle_dev_start: assertion `!worker->running' failed
It's easy to avoid that situation since qemu spice_display_is_running
tracks the server state.
After the commit "spice: do not stop spice if VM is paused", it will
be possible to pause and resume the VM, and this will call
qemu_spice_display_start() twice. The easiest is to add a check for
spice_display_is_running with this patch to avoid the assert.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The license information in this file is very messy. A short note at
the beginning says GPL first, but the long boilerplate code then
talks about "GNU Lesser General Public License version 2.0". First,
there is no such version of the "GNU Lesser GPL", it only started with
version 2.1. In version 2.0, it was still called "GNU Library GPL"
instead. Second, you can easily get the license of this file wrong
if you only quickly glance at the long boilerplate code.
Anyway, looking at the text of the LGPL (see COPYING.LIB in the top
directory), the license clearly states in section "3." that one should
rather replace the license information with the GPL information in
such a case of a mixture instead. Thus let's clean up the confusing
statements and use the proper GPL text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 1550731902-28842-1-git-send-email-thuth@redhat.com
[ kraxel: s/v2/v2+/ as requested by Daniel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qkbd_state_key_event() does that for us.
Fixes: 07333e1ca3 kbd-state: use state tracker for sdl2
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190208072744.10687-1-kraxel@redhat.com
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).
Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.
Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
It is possible that the modifier state on keyup is different from the
modifier state on keydown. In that case the keycode lookup can end up
with different keys in case multiple keysym -> keycode mappings exist,
because it picks the mapping depending on modifier state.
To fix that change the lookup logic for keyup events. Instead of
looking at the modifier state check the key state and prefer a keycodes
where the key is in "down" state right now.
Fixes: abb4f2c965 keymap: consider modifier state when picking a mapping
Buglink: https://bugs.launchpad.net/bugs/1738283
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1658676
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-9-kraxel@redhat.com
Pass the keyboard state tracker handle down to keysym2scancode(),
so the code can fully inspect the keyboard state as needed. No
functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-8-kraxel@redhat.com
Use the new keyboard state tracked for vnc. Allows to drop the
vnc-specific modifier state tracking code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-7-kraxel@redhat.com
Use the new keyboard state tracked for gtk. Allows to drop the
gtk-specific modifier state tracking code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-6-kraxel@redhat.com
Also: sdl2_process_key is never called with scon == NULL.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-5-kraxel@redhat.com
Use the new keyboard state tracked for sdl2. We can drop the modifier
state tracking from sdl2. Also keyup code is simpler, the state tracker
will take care to not send suspious keyup events to the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-4-kraxel@redhat.com
Now that most user interfaces are using QKeyCodes it is easier to have
common keyboard code useable by all user interfaces.
This patch adds helper code to track the state of all keyboard keys,
using a bitmap indexed by QKeyCode. Modifier state is tracked too,
as separate bitmap. That makes checking modifier state easier.
Likewise we can easily apply special handling for capslock & numlock
(toggles on keypress) and ctrl + shift (we have two keys for that).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190122092814.14919-2-kraxel@redhat.com
[ kraxel: added license boilerplate header ]
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This would help gtk-egl display showing scaled DMABuf cursor images when
gtk window was zoomed. A default scale of (1.0, 1.0) was presumed for
call sites where no scaling is needed.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Message-id: 23B229B3-3095-4DFB-8369-866784808D30@me.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
macOS 10.14 deprecated NSOnState/NSOffState in favour of
NSControlStateValueOn/NSControlStateValueOff. Use the new constants,
and #define them to the old ones when compiling against a pre-10.13 SDK.
Also [NSGraphicsContext graphicsPort] is now deprecated, use
[NSGraphicsContext CGContext] when available.
Signed-off-by: Brendan Shanks <brendan@bslabs.net>
Message-id: 20190201071225.20576-1-brendan@bslabs.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sdl_keysym.h has only been included by sdl.c which has recently been
removed recently with this commit:
0015ca5cba
("ui: remove support for SDL1.2 in favour of SDL2")
So we can drop this header file now completely, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 1549282241-23535-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the user raises their fingers from the touchpad, we may receive a
GDK_SMOOTH_SCROLL event with delta_y == 0. Avoid generating a WHEEL_UP
event in this situation.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-id: 20190204122043.43007-1-slp@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SDL1.2 was deprecated in the 2.12.0 release with:
commit e52c6ba341
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Jan 15 14:25:33 2018 +0000
ui: deprecate use of SDL 1.2 in favour of 2.0 series
The SDL 2.0 release was made in Aug, 2013:
https://www.libsdl.org/release/
That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.
Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is thus able to be removed in the 3.1.0 release.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180822131554.3398-4-berrange@redhat.com>
[ kraxel: rebase ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a new option to the input-linux object:
grab-toggle=[key-combo]
The key combination can be one of the following:
* ctrl-ctrl
* alt-alt
* meta-meta
* scrolllock
* ctrl-scrolllock
The user can pick any of these key combinations. The VM's grab
of the evdev device will be toggled when the key combination is
pressed.
Any invalid setting will result in an error. No setting will
result in the current default of ctrl-ctrl.
The right and left ctrl key both work for Ctrl-Scrolllock.
If scrolllock is selected as one of the grab-toggle keys, it
will be entirely disabled and not passed to the guest at all.
This is to prevent enabling it while attempting to leave or enter
the VM. On the host, scrolllock can be disabled using xmodmap.
First, find the modifier that Scroll_Lock is bound to:
$ xmodmap -pm
Then, remove Scroll_Lock from it, replacing modX with the modifier:
$ xmodmap -e 'remove modX = Scroll_Lock'
If Scroll_Lock is not bound to any modifier, it is already disabled.
To save the changes, add them to your xinitrc.
Ryan El Kochta (1):
input-linux: customizable grab toggle keys v5
Signed-off-by: Ryan El Kochta <relkochta@gmail.com>
Message-id: 20190123214555.12712-2-relkochta@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It was assumed that mesa provides the necessary X11 includes,
but it is not always the case, as it can be configured without x11 support.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190116113751.17177-1-alex.kanavin@gmail.com
[ kraxel: codestyle fix (long line) ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When size and format of the display surface stays the same we can just
tag the guest display as dirty and be done with it.
There is no need need to resize the vnc server display or to touch the
vnc client dirty bits. On the next refresh cycle
vnc_refresh_server_surface() will check for actual display content
changes and update the client dirty bits as needed.
The desktop resize and framebuffer format notifications to the vnc
client will be skipped too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190116101049.8929-1-kraxel@redhat.com
Modern desktop environments can render icons at very large sizes,
especially with high DPI screens. Providing a 32x32 pixel bitmap is
nowhere near sufficient anymore.
When displayed in GNOME shell the QEMU icon looks awful, having been
scaled up to at least x4 its base size. This is compounded by the fact
that the BMP file doesn't do transparency, so while we've removed white
pixels, we still have anti-aliased nearly-white pixels which make the
logo look appalling on black backgrounds.
Loading a high resolution PNG icon addresses both problems, but requires
use of the extra SDL2_image library.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
