Commit Graph

1204 Commits

Author SHA1 Message Date
Jan Kiszka
8e1b90ecc5 Leave inner main_loop faster on pending requests
If there is any pending request that requires us to leave the inner loop
if main_loop, makes sure we do this as soon as possible by enforcing
non-blocking IO processing.

At this change, move variable definitions out of the inner loop to
improve readability.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14 12:39:44 -02:00
Jan Kiszka
1745eaaa7c Process vmstop requests in IO thread
A pending vmstop request is also a reason to leave the inner main loop.
So far we ignored it, and pending stop requests issued over VCPU threads
were simply ignored.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14 12:39:44 -02:00
Jan Kiszka
b4a3d965de Stop current VCPU on synchronous reset requests
If some I/O operation ends up calling qemu_system_reset_request in VCPU
context, we record this and inform the io-thread, but we do not
terminate the VCPU loop. This can lead to fairly unexpected behavior if
the triggering reset operation is supposed to work synchronously.

Fix this for TCG (when run in deterministic I/O mode) by setting the
VCPU on stop and issuing a cpu_exit. KVM requires some more work on its
VCPU loop.

[ ported from qemu-kvm ]

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14 12:39:44 -02:00
Gleb Natapov
4fef930af8 do not pass NULL to strdup.
Also use qemu_strdup() instead of strdup() in bootindex code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-04 21:21:41 +01:00
Anthony Liguori
b3a98367ee Merge remote branch 'qemu-kvm/uq/master' into staging
aliguori: fix build with !defined(KVM_CAP_ASYNC_PF)

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-01 15:32:18 -06:00
Markus Armbruster
319ae529b8 blockdev: Fix drive_add for drives without media
Watch this:

    (qemu) drive_add 0 if=none
    (qemu) info block
    none0: type=hd removable=0 [not inserted]
    (qemu) drive_del none0
    Segmentation fault (core dumped)

add_init_drive() is confused about drive_init()'s failure modes, and
cleans up when it shouldn't.  This leaves the DriveInfo with member
opts dangling.  drive_del attempts to free it, and dies.

drive_init() behaves as follows:

* If it created a drive with media, it returns its DriveInfo.

* If it created a drive without media, it clears *fatal_error and
  returns NULL.

* If it couldn't create a drive, it sets *fatal_error and returns
  NULL.

Of its three callers:

* drive_init_func() is correct.

* usb_msd_init() assumes drive_init() failed when it returns NULL.
  This is correct only because it always passes option "file", and
  "drive without media" can't happen then.

* add_init_drive() assumes drive_init() failed when it returns NULL.
  This is incorrect.

Clean up drive_init() to return NULL on failure and only on failure.
Drop its parameter fatal_error.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31 11:59:24 +01:00
Markus Armbruster
5645b0f4f2 blockdev: Replace drive_add()'s fmt, ... by optstr parameter
Let the callers build the optstr.  Only one wants to.  All the others
become simpler, because they don't have to worry about escaping '%'.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31 11:57:44 +01:00
Markus Armbruster
4e5d9b578f blockdev: Reject multiple definitions for the same drive
We silently ignore multiple definitions for the same drive:

    $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=ide,index=1,file=tmp.qcow2 -drive if=ide,index=1,file=nonexistant
    QEMU 0.13.50 monitor - type 'help' for more information
    (qemu) info block
    ide0-hd1: type=hd removable=0 file=tmp.qcow2 backing_file=tmp.img ro=0 drv=qcow2 encrypted=0

With if=none, this can become quite confusing:

    $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=none,index=1,file=tmp.qcow2,id=eins -drive if=none,index=1,file=nonexistant,id=zwei -device ide-drive,drive=eins -device ide-drive,drive=zwei
    qemu-system-x86_64: -device ide-drive,drive=zwei: Property 'ide-drive.drive' can't find value 'zwei'

The second -device fails, because it refers to drive zwei, which got
silently ignored.

Make multiple drive definitions fail cleanly.

Unfortunately, there's code that relies on multiple drive definitions
being silently ignored: main() merrily adds default drives even when
the user already defined these drives.  Fix that up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31 11:22:37 +01:00
Markus Armbruster
2292ddaeab blockdev: Make drive_add() take explicit type, index parameters
Before, type & index were hidden in printf-like fmt, ... parameters,
which get expanded into an option string.  Rather inconvenient for
uses later in this series.

New IF_DEFAULT to ask for the machine's default interface.  Before,
that was done by having no option "if" in the option string.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31 10:59:09 +01:00
Jes Sorensen
70b4f4bb05 Make strtosz() return int64_t instead of ssize_t
strtosz() needs to return a 64 bit type even on 32 bit
architectures. Otherwise qemu-img will fail to create disk
images >= 2GB

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24 11:08:50 +01:00
Jan Kiszka
cad1e2827b kvm: Drop smp_cpus argument from init functions
No longer used.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-23 02:27:21 -02:00
Anthony Liguori
a7bd621d7a Merge remote branch 'mst/for_anthony' into staging 2011-01-10 10:32:01 -06:00
Aurelien Jarno
818c2e1b97 Merge branch 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu
* 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu:
  vnc/spice: add set_passwd monitor command.
  vnc: support password expire
  vnc: auth reject cleanup
  spice: add qmp 'query-spice' and hmp 'info spice' commands.
  spice: connection events.
  spice: add qxl device
  spice: add qxl vgabios binary.
2010-12-27 22:59:48 +01:00
Aurelien Jarno
5697f6ae41 Fix a missing trailing newline
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-27 18:29:20 +01:00
Isaku Yamahata
80376c3fc2 qbus: register reset handler for qbus whose parent is NULL
Stefan Weil reported the regression caused by
ec990eb622 as follows

> The second regression also occurs with MIPS malta.
> Networking no longer works with the default pcnet nic.
>
> This is caused because the reset function for pcnet is no
> longer called during system boot. The result in an invalid
> mac address (all zero) and a non-working nic.
>
> For this second regression I still have no simple solution.
> Of course mips_malta.c should be converted to qdev which
> would fix both problems (but only for malta system emulation).

The issue is, it is assumed that all qbuses, qdeves are under
main_system_bus. But there are qbuses whose parent is NULL. So it
is necessary to trigger reset for those qbuses.
(On the other hand, if NULL is passed to qdev_create(), its parent bus
is main_system_bus.)
Ideally those buses should be moved under bus controller
device which is qdev. But it's not done yet.
So register qbus reset handler for qbus whose parent is NULL.

Reported-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-20 15:16:53 +02:00
Blue Swirl
4fd37a98d1 Avoid a warning from OpenBSD linker
Avoid the warning below by using snprintf:
../libhw64/vl.o(.text+0x78d4): In function `get_boot_devices_list':
/src/qemu/vl.c:763: warning: sprintf() is often misused, please use snprintf()

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-19 14:05:43 +00:00
Gleb Natapov
962630f207 Pass boot device list to firmware.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:32:48 +00:00
Gleb Natapov
4cab946a4a Add notifier that will be called when machine is fully created.
Action that depends on fully initialized device model should register
with this notifier chain.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:32:48 +00:00
Gleb Natapov
2e55e84282 Add bootindex for option roms.
Extend -option-rom command to have additional parameter ,bootindex=.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:32:47 +00:00
Gleb Natapov
1ca4d09ae0 Add bootindex parameter to net/block/fd device
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:32:46 +00:00
Gerd Hoffmann
a19cbfb346 spice: add qxl device
qxl is a paravirtual graphics card.  The qxl device is the bridge
between the guest and the spice server (aka libspice-server).  The
spice server will send the rendering commands to the spice client, which
will actually render them.

The spice server is also able to render locally, which is done in case
the guest wants read something from video memory.  Local rendering is
also used to support display over vnc and sdl.

qxl is activated using "-vga qxl".  qxl supports multihead, additional
cards can be added via '-device qxl".

[ v2: add copyright to files                     ]
[ v2: use qemu-common.h for standard includes    ]
[ v2: create separate qxl-vga device for primary ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-09 14:23:24 +01:00
Michael S. Tsirkin
c924f36a30 Merge remote branch 'origin/master' into pci
Conflicts:
	Makefile.objs
	hw/virtio.c
2010-12-01 07:11:51 +02:00
Anthony Liguori
ec990eb622 qdev: reset qdev along with qdev tree
This patch changes the reset handling so that qdev has no knowledge of the
global system reset.  Instead, a new bus/device level function is introduced
that allows all devices/buses on the bus/device to be reset using a depth
first transversal.

N.B. we have to expose the implicit system bus because we have various hacks
that result in an implicit system bus existing.  Instead, we ought to have an
explicitly created system bus that we can trigger reset from.  That's a topic
for a future patch though.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Stefan Hajnoczi
94b0b5ff5f trace: Trace vm_start()/vm_stop()
VM state change notifications are invoked from vm_start()/vm_stop().
Trace these state changes so we can reason about the state of the VM
from trace output.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Stefan Hajnoczi
0290b57bdf Delete IOHandlers after potentially running them
Since commit 4bed983730 an .fd_read()
handler that deletes its IOHandler is exposed to .fd_write() being
called on the deleted IOHandler.

This patch fixes deletion so that .fd_read() and .fd_write() are never
called on an IOHandler that is marked for deletion.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 14:35:00 -06:00
Jes Sorensen
9f9b17a4f0 Introduce strtosz() library function to convert a string to a byte count.
strtosz() returns -1 on error. It now supports human unit formats in
eg. 1.0G, with better error handling.

The following suffixes are supported:
B/b = bytes
K/k = KB
M/m = MB
G/g = GB
T/t = TB

This patch changes -numa and -m input to use strtosz().

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-03 12:48:09 -05:00
Blue Swirl
c57c846a80 qemu-timer: move commonly used timer code to qemu-timer-common
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.

Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.

Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.

After this change, tracing can be used also for user code and
simpletrace on Win32.

Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-23 15:24:07 +00:00
Anthony Liguori
4447d60968 Merge remote branch 'spice/submit.6' into staging
Conflicts:
	configure

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-05 14:14:19 -05:00
Daniel P. Berrange
39eaab9ac2 Add option to turn on JSON pretty printing in monitor
Expaned '-mon' arg to allow a 'pretty=on' flag. This makes the
monitor pretty print its replies to easy human debugging / reading

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-01 10:12:43 -03:00
Andreas Färber
e78815a554 Introduce qemu_madvise()
vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.

Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.

Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.

Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.

v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.

v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.

v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
  Spotted by Blue Swirl.

v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
  Note that this relies on -1 not being a valid advice value.

v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
  This will currently break the check in kvm-all.c by calling madvise() with
  a supported flag, which will not fail. Ideas/patches welcome.

v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
  Add defines to Makefile, not QEMU_CFLAGS.
  Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.

v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
  Suggested by Blue Swirl.

Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 11:26:05 +00:00
Gerd Hoffmann
a3e2226031 spice: simple display
With that patch applied you'll actually see the guests screen in the
spice client.  This does *not* bring qxl and full spice support though.
This is basically the qxl vga mode made more generic, so it plays
together with any qemu-emulated gfx card.  You can display stdvga or
cirrus via spice client.  You can have both vnc and spice enabled and
clients connected at the same time.
2010-09-21 18:36:43 +02:00
Gerd Hoffmann
29b0040be6 spice: core bits
Add -spice command line switch.  Has support setting passwd and port for
now.  With this patch applied the spice client can successfully connect
to qemu.  You can't do anything useful yet though.
2010-09-21 18:36:42 +02:00
Gerd Hoffmann
526c523781 Use machine_init() to register virtfs config options. 2010-09-21 18:35:30 +02:00
Gerd Hoffmann
6b62dc2dd7 Use display types for local display only.
This patch drops DT_VNC.  The display types are only used to select
select the local display (i.e. curses, sdl, coca, ...).  Remote
displays (for now only vnc, spice will follow) can be enabled
independently.
2010-09-21 18:35:30 +02:00
Prerna Saxena
ab6540d55e trace: Add trace file name command-line option
This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.

Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-09-09 16:22:44 -05:00
Aneesh Kumar K.V
12848bfc5d virtio-9p: Add SM_NONE security model
This is equivalent to SM_PASSTHROUGH security model.
The only exception is, failure of privilige operation like chown
are ignored. This makes a passthrough like security model usable
for people who runs kvm as non root

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08 22:56:42 +05:30
Aneesh Kumar K.V
c93031e56a virtio-9p: Make sure -virtfs option works correctly
When making copy of arguments we were doing partial copy

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-04 09:52:53 +00:00
Blue Swirl
cb93bbdd7d Fix OpenBSD linker warning
Fix a warning from OpenBSD linker:
../libhw32/vl.o(.text+0x5c3c): In function `main':
/src/qemu/vl.c:2335: warning: sprintf() is often misused, please use snprintf()

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-31 20:16:59 +00:00
Gerd Hoffmann
03b0ba70ab compile -fsdev and -virtfs cmd line options unconditionally.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22 17:11:06 -05:00
Gerd Hoffmann
3329f07b7a QemuOpts: make most qemu_*_opts static
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22 17:11:06 -05:00
Blue Swirl
8e00128d32 Remove useless NULL checks for qemu_malloc return value
Found with this Coccinelle semantic patch:
@@
expression E;
identifier ptr;
identifier fn ~= "qemu_mallocz*";
@@

-ptr = fn(E);
-if (ptr == NULL) { ... }
-
+ptr = fn(E);

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-19 20:24:39 +00:00
Amit Shah
8e84865e54 migration: Accept 'cont' only after successful incoming migration
When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.

Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.

A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.

Reported-by: Laine Stump <laine@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:14:08 +02:00
Joel Schopp
dca98169b8 remove pointless if from vl.c
We already set sockets to nonzero in the code above.
So this if statement always evaluates true.  Remove it.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:05:52 +02:00
Jan Kiszka
472fb0c479 Rename tcg_cpu_exec and tcg_has_work
These functions are also used for kvm under !CONFIG_IOTHREAD, having
'tcg' in their name is just misleading.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-22 05:52:09 +02:00
Alex Williamson
97ab12d466 savevm: Migrate RAM based on name/offset
Synchronize RAM blocks with the target and migrate using name/offset
pairs.  This ensures both source and target have the same view of
RAM and that we get the right bits into the right slot.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Alex Williamson
0be71e324f savevm: Add DeviceState param
When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Juan Quintela
8ca5e80118 Exit if incoming migration fails
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:51 -05:00
Venkateswararao Jujjuri (JV)
758e8e38eb virtio-9p: Make infrastructure for the new security model.
This patch adds required infrastructure for the new security model.

- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Venkateswararao Jujjuri (JV)
9ce56db6f0 virtio-9p: Introduces an option to specify the security model.
The new option is:

-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag

In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:30 -05:00
Gerd Hoffmann
fd42deeb4c Add exit notifiers.
Hook up any cleanup work which needs to be done here.  Advantages over
using atexit(3):

  (1) You get passed in a pointer to the notifier.  If you embed that
      into your state struct you can use container_of() to get get your
      state info.
  (2) You can unregister, say when un-plugging a device.

[ v2: move code out of #ifndef _WIN32 ]

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-14 15:46:28 -05:00
Anthony Liguori
a4673e2762 Merge remote branch 'kwolf/for-anthony' into staging
Conflicts:
	hw/pc.c
2010-06-14 10:33:36 -05:00
Jes Sorensen
ce798cf2a2 Move set_proc_name() to OS specific files.
Move handling to change process name to POSIX specific files
plus add a better error message to cover the case where the
feature isn't supported.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:15 +03:00
Jes Sorensen
9156d76331 Move line-buffering setup to OS specific files.
Move line-buffering setup to OS specific files.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:15 +03:00
Jes Sorensen
eb505be11b Move daemonize handling to OS specific files
Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:15 +03:00
Jes Sorensen
0766379d4c Move chroot handling to OS specific files.
Move chroot handling to OS specific files.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:15 +03:00
Jes Sorensen
8847cfe8aa Move runas handling from vl.c to OS specific files.
Move code to handle runas, ie. change of user id of QEMU process
to OS specific files and provide dummy stub for Win32.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:15 +03:00
Jes Sorensen
59a5264b99 Introduce OS specific cmdline argument handling and move SMB arg to os-posix.c
Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.

In addition move SMB argument to os-posix.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:15 +03:00
Jes Sorensen
9f16732a06 Rename qemu-options.h to qemu-options.def
Rename qemu-options.h to qemu-options.def as it is not a header file
for general use and this leaves space for a proper qemu-options.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:15 +03:00
Jes Sorensen
6170540b82 Move find_datadir to OS specific files.
This moves the win32 and POSIX versions of find_datadir() to OS
specific files, and removes some #ifdef clutter from vl.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:14 +03:00
Jes Sorensen
8d963e6ae7 Move main signal handler setup to os specificfiles.
Move main signal handler setup to os specific files.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:14 +03:00
Jes Sorensen
fe98ac1461 Rename os_setup_signal_handling() to os_setup_early_signal_handling()
Rename os_setup_signal_handling() to os_setup_early_signal_handling()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:14 +03:00
Jes Sorensen
69bd73b1b0 Move win32 early signal handling setup to os_setup_signal_handling()
Move win32 early signal handling setup to os_setup_signal_handling()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:14 +03:00
Jes Sorensen
86b645e753 Introduce os-posix.c and create os_setup_signal_handling()
Introcuce os-posix.c and move posix specific signal handling
there.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:14 +03:00
Jes Sorensen
0d93ca7c3b vl.c: Move host_main_loop_wait() to OS specific files.
Move host_main_loop_wait() to OS specific files. Create
qemu-os-posix.h and provide empty inline for the POSIX case.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:14 +03:00
Jes Sorensen
19113504de Introduce os-win32.c and move polling functions from vl.c
This introduces os-win32.c. It is meant to carry win32 specific
functions thata are not relevant for all of QEMU as well as win32
versions of various pieces like signal handling etc.

Move win32 polling handler helper functions from vl.c to os-win32.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:14 +03:00
Jes Sorensen
ddc9120e90 vl.c: Remove double include of netinet/in.h for Solaris
vl.c: netinet/in.h is already included once above for the

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Andreas Faerber <afaerber@opensolaris.org>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-12 08:49:13 +03:00
Isaku Yamahata
0f2ad63fcb main: allocate gui_timer only once.
fix memory leak.
there is no need to allocate more than one gui_timer.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10 16:48:06 +00:00
Paolo Bonzini
1dabe05ce4 configure: expand ${prefix} in create_config
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10 00:09:49 +02:00
Markus Armbruster
666daa6823 blockdev: Collect block device code in new blockdev.c
Anything that moves hundreds of lines out of vl.c can't be all bad.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 15:20:47 +02:00
Markus Armbruster
a803cb8eb8 blockdev: Hide QEMUMachine from drive_init()
To pave the way for moving it out of vl.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:40 +02:00
MORITA Kazutaka
2bc93fed76 close all the block drivers before the qemu process exits
This patch calls the close handler of the block driver before the qemu
process exits.

This is necessary because the sheepdog block driver releases the lock
of VM images in the close handler.

Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:40 +02:00
Kevin Wolf
236f1f672c Fix error message in drive_init
The real error is the return value of bdrv_open. errno might be overwritten or
not even set to that value in the first place.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:40 +02:00
Markus Armbruster
fb08000cee usb: Remove unused usb_device_add() parameter is_hotplug
Unused since commit b3e461d3.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster
f274776028 blockdev: Belatedly remove driveopts
Unused since commit 9dfd7c7a.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster
1a43782e34 blockdev: Belatedly remove MAX_DRIVES
Unused since commit 751c6a17.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Gerd Hoffmann
dc33bb3411 drive: allow rerror, werror and readonly for if=none
When creating guest disks the qdev way using ...

  -drive if=none,id=$name,args
  -device $driver,drive=$name

it is not possible to specify rerror, werror and readonly arguments
for drive as drive_init allows/blocks them based on the interface (if=)
specified and none isn't white-listed there.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-28 13:14:25 +02:00
Alexander Graf
c317728872 Make cache=unsafe the default for -snapshot
When using -snapshot we don't care about data integrity of the cow file
at all, so let's disable flushing there and squeeze out the last drop
of performance we could possibly get.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-27 00:08:09 +02:00
Alexander Graf
016f5cf6ff Add cache=unsafe parameter to -drive
Usually the guest can tell the host to flush data to disk. In some cases we
don't want to flush though, but try to keep everything in cache.

So let's add a new cache value to -drive that allows us to set the cache
policy to most aggressive, disabling flushes. We call this mode "unsafe",
as guest data is not guaranteed to survive host crashes anymore.

This patch also adds a noop function for aio, so we can do nothing in AIO
fashion.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-26 20:05:14 +02:00
Kevin Wolf
019e78ba6e Fix error handling in qemu_read_config_file
We need to close the file even in error case. While at it, make the callers
catch all kind of errors. ENOENT is allowed for default config files, they
are optional.

Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24 15:18:23 -05:00
Luiz Capitulino
a875170167 Revert "Monitor: Return before exiting with 'quit'"
This reverts commit 0e8d2b5575.

Next commits will do the same thing in a better way.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-05-19 12:45:53 -03:00
TeLeMan
a5829fd9e6 fix chardev_init for win32
chardev_init functions use socket,so socket_init() shoud be placed at
the front of chardev_init on win32.

Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-18 19:56:59 +02:00
Blue Swirl
262353cb1f Fix cpu list("-cpu ?") breakage, spotted by TeLeMan
Fix breakage by 04c9a0cbc2.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-04 19:55:35 +00:00
Luiz Capitulino
6ed2c484f2 QMP: Introduce RESUME event
It's emitted when the Virtual Machine resumes execution.

We currently have the STOP event but don't have the matching
RESUME one, this means that clients are notified when the VM
is stopped but don't get anything when it resumes.

Let's fix that as it's already causing some trouble to libvirt.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:39:12 -05:00
Gautham R Shenoy
3d54abc7b7 virtio-9p: Create a syntactic shortcut for the file-system pass-thru
Currently the commandline to create a virtual-filesystem pass-through between
the guest and the host is as follows:
#qemu -fsdev fstype,id=ID,path=path/to/share \
      -device virtio-9p-pci,fsdev=ID,mount_tag=tag \

This patch provides a syntactic short-cut to achieve the same as follows:
#qemu -virtfs fstype,path=path/to/share,mount_tag=tag

This will be internally expanded as:
#qemu -fsdev fstype,id=tag,path=path/to/share, \
      -device virtio-9p-pci,fsdev=tag,mount_tag=tag \

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:17:39 -05:00
Gautham R Shenoy
74db920c32 virtio-9p: Create a commandline option -fsdev
This patch creates a new command line option named -fsdev to hold any file
system specific information.

The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id:     Identifier used to refer to this fsdev
path:   The path on the host that is identified by this fsdev.

[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:17:37 -05:00
Alex Williamson
37905d6ae5 Fix boot once option
The boot once options seems to have gotten broken since it originally
went in.  We need to wait until the second time restore_boot_devices()
gets called before restoring the standard boot order and removing itself
from the reset list.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
--
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:09:47 -05:00
Thomas Monjalon
f75ca1ae20 fix old typos in help header
1) Qemu is not only a PC emulator.
2) "image image" has already been changed to "disk image" in qemu-doc.texi

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-01 19:48:30 +00:00
Jan Kiszka
157b931987 monitor: Reorder intialization to drop initial mux focus
So far a multiplexed monitor started disabled. Restore this property for
the new way of configuring by moving the monitor initialization before
all devices (the last one to attach to a char-mux will gain the focus).

Once we have a real use case for that, we may also consider assigning
the initial focus explicitly.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-26 16:36:31 -03:00
Jan Kiszka
140e065d72 monitor: Cleanup ID assignment for compat switch
Canonicalize the ID assignment when creating monitor devices via the
legacy switch and use less easily colliding names.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-26 16:36:31 -03:00
Luiz Capitulino
0e8d2b5575 Monitor: Return before exiting with 'quit'
The 'quit' Monitor command (implemented by do_quit()) calls
exit() directly, this is problematic under QMP because QEMU
exits before having a chance to send the ok response.

Clients don't know if QEMU exited because of a problem or
because the 'quit' command has been executed.

This commit fixes that by moving the exit() call to the main
loop, so that do_quit() requests the system to quit, instead
of calling exit() directly.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-26 16:36:01 -03:00
Christoph Hellwig
763b6084ba cleanup block driver option handling in vl.c
Assign directly to the bdrv_flags variable instead of using
magic numbers before translating to the BDRV_O_* options.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23 16:08:46 +02:00
Kevin Wolf
d6e9098e10 Replace calls of old bdrv_open
What is known today as bdrv_open2 becomes the new bdrv_open. All remaining
callers of the old function are converted to the new one. In some places they
even know the right format, so they should have used bdrv_open2 from the
beginning.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23 16:08:46 +02:00
Kevin Wolf
dcfb0939bd qemu-config: qemu_read_config_file() reads the normal config file
Introduce a new function qemu_read_config_file which reads the VM configuration
from a config file. Unlike qemu_config_parse it doesn't take a open file but a
filename and reduces code duplication as a side effect.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23 16:08:45 +02:00
Paolo Bonzini
98c8573eb3 provide a stub version of kvm-all.c if !CONFIG_KVM
This allows limited use of kvm functions (which will return ENOSYS)
even in once-compiled modules.  The patch also improves a bit the error
messages for KVM initialization.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[blauwirbel@gmail.com: fixed Win32 build]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19 18:59:30 +00:00
Markus Armbruster
c389c43ee5 error: Drop extra messages after qemu_opts_set() and qemu_opts_parse()
Both functions report errors nicely enough now, no need for additional
messages.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18 23:46:48 +02:00
Blue Swirl
7277e027bb Fix build when configured with --enable-io-thread
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-12 17:19:06 +00:00
Eduardo Habkost
4e9e9d6e0a boot: remove unused boot_devices_bitmap variable
In addition to removing the variable, this also renames the parse_bootdevices()
function to validate_bootdevices(), as we don't need its return value anymore.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-10 02:10:02 +02:00
Eduardo Habkost
da1fcfda59 net: remove broken net_set_boot_mask() boot device validation
There are many problems with net_set_boot_mask():

1) It is broken when using the device model instead of "-net nic". Example:
   $ qemu-system-x86_64 -device rtl8139,vlan=0,id=net0,mac=52:54:00:82:41:fd,bus=pci.0,addr=0x4 -net user,vlan=0,name=hostnet0 -vnc 0.0.0.0:0 -boot n
   Cannot boot from non-existent NIC
   $
2) The mask was previously used to set which boot ROMs were supposed to be
   loaded, but this was changed long time ago. Now all ROM images are loaded,
   and SeaBIOS takes care of jumping to the right boot entry point depending on
   the boot settings.
3) Interpretation and validation of the boot parameter letters is done on
   the machine type code. Examples: PC accepts only a,b,c,d,n as valid boot
   device letters. mac99 accepts only a,b,c,d,e,f.

As a side-effect of this change, qemu-kvm won't abort anymore if using "-boot n"
on a machine with no network devices. Checking if the requested boot device is
valid is now a task for the BIOS or the machine-type code.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-10 02:09:55 +02:00
Paolo Bonzini
28c2897373 move balloon handling to balloon.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 18:55:56 +02:00
Paolo Bonzini
fbe3288df6 move two variable declarations out of vl.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 18:55:54 +02:00
Paolo Bonzini
0706a4dcce move socket_init to qemu-sockets.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 18:55:54 +02:00
Naphtali Sprei
2db7ad59fc read-only: allow read-only CDROM with any interface
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08 11:11:21 +02:00
Juergen Lock
92c0e6579c Use sysctl instead of /proc to find executable path on FreeBSD
..since /proc usually isn't mounted on FreeBSD.

Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-30 17:44:38 +00:00
Blue Swirl
ad96090a01 Refactor target specific handling, compile vl.c only once
Move target specific functions and RAM handling to arch_init.c.

Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.

Now that no target dependencies remain, compile vl.c only once
for all targets.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl
296af7c952 Refactor CPUState handling out of vl.c
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:50 +00:00
Blue Swirl
de06f8d193 Refactor a few architecture dependent pieces in vl.c
These will be moved later.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:50 +00:00
Blue Swirl
d745bef890 Move KVM and Xen global flags to vl.c
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:49 +00:00
Blue Swirl
54fc6ea92b Adjust debug handling
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:46 +00:00
Blue Swirl
7e4c0336e2 Fix driftfix option
Based on patch by Zachary Amsden.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 21:33:46 +00:00
Blue Swirl
87d0a28e78 Refactor numa mode setting
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 18:24:45 +00:00
Blue Swirl
f7736b91c4 Compile ide/core only once
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.

Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 06:20:53 +00:00
Anthony Liguori
5ec9cc64a4 Revert "Introduce a default qmp session"
This reverts commit 3290c4aac5.

Conflicts:

	vl.c
2010-03-21 14:15:24 -05:00
Anthony Liguori
2d114dc16f Revert "qmp: don't make -qmp disable the default monitor"
This reverts commit d49f626ed0.
2010-03-21 14:14:38 -05:00
Anthony Liguori
28695489e3 Revert "Convert atexit users to exit_notifier"
This reverts commit d7234f4d7e.

Conflicts:

	hw/xen_machine_pv.c

This should have never been committed.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-21 14:13:02 -05:00
Anthony Liguori
365c4243ec Revert "Add exit notifiers"
This reverts commit 3b6304f706.

This was mistakenly committed.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-21 14:11:51 -05:00
Blue Swirl
9b164805a3 Fix mingw32 build
mkdir() only takes path argument on mingw32:

  CC    i386-softmmu/vl.o
/src/qemu/vl.c: In function 'qmp_add_default':
/src/qemu/vl.c:3763: error: too many arguments to function 'mkdir'
/src/qemu/vl.c:3769: error: too many arguments to function 'mkdir'

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-20 08:26:27 +00:00
Anthony Liguori
3290c4aac5 Introduce a default qmp session
Basically, -qmp unix:%{home}/.qemu/qmp/%{uuid}.sock,server,nowait

%{uuid} will be -uuid if it's specified, otherwise, if libuuid is available,
we generate a uuid.  If it's not available, we don't create one.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19 15:27:39 -05:00
Anthony Liguori
d49f626ed0 qmp: don't make -qmp disable the default monitor
Instead, we introduce a default_qmp flag.  We don't use it yet, but will in the
next patch.

This has a user-visible impact as specifying just -qmp will now also show a
monitor on the 'vc'.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19 15:27:39 -05:00
Anthony Liguori
d7234f4d7e Convert atexit users to exit_notifier
All of these users have global state so we really don't see a benefit from
exit_notifier.  However, using exit_notifier means that there's one less
justification for having global state in the first place.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19 15:27:38 -05:00
Anthony Liguori
3b6304f706 Add exit notifiers
Like atexit() but with state

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19 15:27:38 -05:00
Juan Quintela
4bed983730 Handle deleted IOHandlers in a single buffer
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19 15:27:27 -05:00
Juan Quintela
7b27a769f1 rename IOCanRWHandler to IOCanReadHandler
It was always only used for reads

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19 15:27:27 -05:00
Juan Quintela
31d4ee6cf6 Convert io handlers to QLIST
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19 15:27:27 -05:00
Paolo Bonzini
db1a49726c split out qemu-timer.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:16:15 -05:00
Paolo Bonzini
d6f4ade214 disentangle tcg and deadline calculation
Just tell main_loop_wait whether to be blocking or nonblocking, so that
there is no need to call qemu_cpus_have_work from the timer subsystem.
Instead, tcg_cpu_exec can say "we want the main loop not to block because
we have stuff to do".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:54 -05:00
Paolo Bonzini
16b151c393 place together more #ifdef CONFIG_IOTHREAD blocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:54 -05:00
Paolo Bonzini
1b48824fa0 move vmstate registration of vmstate_timers earlier
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
a2aaa079df new function qemu_icount_delta
Tweaking the rounding in qemu_next_deadline ensures that there's
no change whatsoever.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
6325504302 add qemu_alarm_pending
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
e2a7bb4b15 add qemu_icount_round
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
4e3de9e954 centralize handling of -icount
A simple patch to place together all handling of -icount.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
972abbe03b introduce and use qemu_clock_enable
By adding the possibility to turn on/off a clock, yet another
incestuous relationship between timers and CPUs can be disentangled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
8c04ba55f9 change qemu_run_timers interface
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
b696482754 extract timer handling out of main_loop_wait
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
3a720b14b9 remove qemu_rearm_alarm_timer from main loop
Make the timer subsystem register its own callback instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
1db89e9123 tweak qemu_notify_event
Instead of testing specially next_cpu in host_alarm_handler, just do
that in qemu_notify_event.  The idea is, if we are not running (or
not yet running) target CPU code, prepare things so that the execution
loop is exited asap; just make that clear.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
7a5e583811 do not use qemu_event_increment outside qemu_notify_event
qemu_notify_event in the non-iothread case is only stopping the current
CPU.  However, if the CPU is idle and the main loop is in the select
call then a call to qemu_event_increment is needed too (as done in
host_alarm_handler).  Since in general one doesn't know whether the CPU
is executing or not, it is a safe bet to always do qemu_event_increment.

Another way to see it: after this patch qemu_event_increment is the
"common part" of qemu_notify_event for both the CONFIG_IOTHREAD and
!CONFIG_IOTHREAD cases, which makes sense.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
1828be316f more alarm timer cleanup
The timer_alarm_pending variable is related to the alarm timer but not
placed in the struct.  Also, in qemu_mod_timer the wrong flag was being
tested: the timer is rearmed in the alarm timer "bottom half", so the
right flag to test there is the "pending" flag.

Finally, I hoisted the NULL checks from alarm_has_dynticks to
host_alarm_handler.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
cd48d7e8f3 only one flag is needed for alarm_timer
The ALARM_FLAG_DYNTICKS can be testing simply by checking if there is
a rearm function.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:53 -05:00
Paolo Bonzini
291defbcda fix error in win32_rearm_timer
The TIME_ONESHOT and TIME_PERIODIC flags are mutually exclusive.
The code after the patch matches the flags used in win32_start_timer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:52 -05:00
Paolo Bonzini
9aea10297f avoid dubiously clever code in win32_start_timer
The code is initializing an unsigned int to UINT_MAX using "-1", so that
the following always-true comparison seems to be always-false at a
first look.  Since alarm timer initializations are never nested, it is
simpler to unconditionally store the result of timeGetDevCaps into
data->period.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:14:52 -05:00
Anthony Liguori
4a39943bd1 Merge remote branch 'markus/qerror' into staging 2010-03-17 09:44:37 -05:00
Markus Armbruster
8212c64f0e qemu-option: Move the implied first name into QemuOptsList
We sometimes permit omitting the first option name, for example
-device foo is short for -device driver=foo.  The name to use
("driver" in the example) is passed as argument to qemu_opts_parse().
For each QemuOptsList, we use at most one such name.

Move the name into QemuOptsList, and pass whether to permit the
abbreviation.  This ensures continued consistency, and simplifies the
commit after next in this series.
2010-03-16 17:45:34 +01:00
Markus Armbruster
0f0bc3f1d5 error: Track locations on command line
New LOC_CMDLINE.  Use it for tracking option with argument in
lookup_opt().  We now report errors like this

    qemu: -device smbus-eeprom: Did not find I2C bus for smbus-eeprom
2010-03-16 16:58:32 +01:00
Markus Armbruster
cf5a65aaaf error: Track locations in configuration files
New LOC_FILE.  Use it for tracking file name and line number in
qemu_config_parse().  We now report errors like

    qemu:foo.conf:42: Did not find I2C bus for smbus-eeprom

In particular, gems like this message:

    -device: no driver specified

become almost nice now:

    qemu:foo.conf:44: -device: no driver specified

(A later commit will get rid of the bogus -device:)
2010-03-16 16:58:32 +01:00
Markus Armbruster
65abca0a34 error: Include the program name in error messages to stderr 2010-03-16 16:58:32 +01:00
Markus Armbruster
1ecda02b24 error: Replace qemu_error() by error_report()
error_report() terminates the message with a newline.  Strip it it
from its arguments.

This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).

There's one place that passes arguments without newlines
intentionally: load_vmstate().  Fix it up.
2010-03-16 16:58:32 +01:00
Markus Armbruster
6e4f984cb9 error: Simplify error sink setup
qemu_error_sink can either point to a monitor or a file.  In practice,
it always points to the current monitor if we have one, else to
stderr.  Simply route errors to the current monitor or else to stderr,
and remove qemu_error_sink along with the functions to control it.

Actually, the old code switches the sink slightly later, in
handle_user_command() and handle_qmp_command(), than it gets switched
now, implicitly, by setting the current monitor in monitor_read() and
monitor_control_read().  Likewise, it switches back slightly earlier
(same places).  Doesn't make a difference, because there are no calls
of qemu_error() in between.
2010-03-16 16:55:05 +01:00
Markus Armbruster
03cd4655cb savevm: Fix -loadvm to report errors to stderr, not the monitor
A monitor may not even exist.

Change load_vmstate() to use qemu_error() instead of monitor_printf().
Parameter mon is now unused, remove it.
2010-03-16 16:55:05 +01:00
Jan Kiszka
18141ed67f Don't set default monitor when there is a mux'ed one
This fixes eg. "-nographic -serial mon:stdio [-serial ...]".

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-14 22:43:35 +01:00
Luiz Capitulino
81d9b784df QMP: Really move the RESET event to qemu_system_reset()
Something bad has happened in the merge of commit 0ee44250, as
the log message says it's supposed to be in qemu_system_reset()
but it is do_vm_stop().

Possibly, it was a problem with the conflict resolution with
ea375f9a (which has been merged first).

This commit moves (again) the RESET event into qemu_system_reset().

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-10 09:06:55 -06:00
Luiz Capitulino
80cd34787f QMP: Introduce RTC_CHANGE event
Emitted whenever the RTC time changes.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:09 -06:00
Luiz Capitulino
51a3bd71b3 QMP: Drop DEBUG event
This event has been introduced in the first round of QMP commits,
turns out that it's based on the usage of the EXCP_DEBUG macro,
which has discussable semantics when exposed through QMP.

As libvirt doesn't use this, let's just drop it.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:08 -06:00
Luiz Capitulino
0ee442502b QMP: Move RESET event into qemu_system_reset()
Nothing will change as that function is currently only called by
the main loop code, but it's the right place for the RESET event,
as it's where the reset is actually performed.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:08 -06:00
Luiz Capitulino
6b8f8fff78 QMP: Move STOP event into do_vm_stop()
I've introduced the STOP event in the main loop, this is wrong
as it will be only emitted if the io thread is enabled.

This fixes that by moving the STOP event to do_vm_stop().

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:01 -06:00
Jan Kiszka
ea375f9ab8 KVM: Rework VCPU state writeback API
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:

- cpu_synchronize_all_states in qemu_savevm_state_complete
  (initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
  (writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
  (writeback after system reset)

These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:

- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE   (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE    (on init or vmload, all VCPUs stopped as well)

This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.

cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.

Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-04 00:29:28 -03:00
Marcelo Tosatti
c902760fb2 Add option to use file backed guest memory
Port qemu-kvm's -mem-path and -mem-prealloc options. These are useful
for backing guest memory with huge pages via hugetlbfs.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: john cooper <john.cooper@redhat.com>
2010-03-04 00:28:47 -03:00
Anthony Liguori
724c689357 Merge remote branch 'qemu-kvm/uq/master' into staging 2010-02-22 16:16:22 -06:00
john cooper
b5ec5ce0e3 Add cpu model configuration support..
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.

A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration.  It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage.  The other
consideration was providing models names reflective of
current processors.  Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.

This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models.  Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.

Proposed new model definitions are provided here for current
AMD and Intel processors.  Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.

A table of names/model_ids may be queried via "-cpu ?model":

        :
    x86       Opteron_G3  AMD Opteron 23xx (Gen 3 Class Opteron)
    x86       Opteron_G2  AMD Opteron 22xx (Gen 2 Class Opteron)
    x86       Opteron_G1  AMD Opteron 240 (Gen 1 Class Opteron)
    x86          Nehalem  Intel Core i7 9xx (Nehalem Class Core i7)
    x86           Penryn  Intel Core 2 Duo P9xxx (Penryn Class Core 2)
    x86           Conroe  Intel Celeron_4x0 (Conroe/Merom Class Core 2)
        :

Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.

The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:

    # qemu-system-x86_64 ... -cpu Nehalem,check
    warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
    warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]

A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.

Configuration data for a cpu model resides in the target config
file which by default will be installed as:

    /usr/local/etc/qemu/target-<arch>.conf

The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.

Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.

This patch was tested relative to qemu.git.

Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-22 16:16:17 -06:00
Marcelo Tosatti
cc84de9570 kvm: consume internal signal with sigtimedwait
Change the way the internal qemu signal, used for communication between
iothread and vcpus, is handled.

Block and consume it with sigtimedwait on the outer vcpu loop, which
allows more precise timing control.

Change from standard signal (SIGUSR1) to real-time one, so multiple
signals are not collapsed.

Set the signal number on KVM's in-kernel allowed sigmask.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-02-22 10:58:33 +02:00
Marcelo Tosatti
fed6c3444c kvm specific wait_io_event
In KVM mode the global mutex is released when vcpus are executing,
which means acquiring the fairness mutex is not required.

Also for KVM there is one thread per vcpu, so tcg_has_work is meaningless.

Add a new qemu_wait_io_event_common function to hold common code
between TCG/KVM.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-02-22 10:58:33 +02:00
Marcelo Tosatti
adc8c965c4 block SIGCHLD in vcpu thread(s)
Otherwise a vcpu thread can run the sigchild handler causing
waitpid() from iothread to fail.

Signed-off-by: Marcelo Tosatti <mtosa...@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-02-22 10:58:33 +02:00
Paolo Bonzini
98b5008081 move default allocator to console.c
Moving stuff in console.c to avoid the need for prototypes makes
this patch a bit bigger, but there's no change in the code.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 15:18:16 -06:00
Paolo Bonzini
9441987446 remove knowledge of defaultallocator_free_displaysurface from sdl.c
Let register_displayallocator hand over the old width/height to the new
allocator.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 15:18:16 -06:00
Paolo Bonzini
b473df6e6a use lazy initialization for display_state
Ensure initialization of a dumb display, if needed, by making
all accesses go through get_displaystate.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 15:18:16 -06:00
Markus Armbruster
668680f75f net: net_check_clients() runs too early to see -device, fix
Call it right after -device devices get created.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 12:12:46 -06:00
Paolo Bonzini
f3dfda6114 use eventfd for iothread
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-02-17 14:59:00 +02:00
Marcelo Tosatti
c37cc7b072 iothread: fix vcpu stop with smp tcg
Round robin vcpus in tcg_cpu_next even if the vm stopped. This
allows all cpus to enter stopped state.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 12:46:06 -06:00
Paolo Bonzini
652ce2d449 loop write in qemu_event_increment upon EINTR
Same as what qemu-kvm does.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 11:56:56 -06:00
Paolo Bonzini
1d0f0d91f2 do not loop on an incomplete io_thread_fd read
No need to loop if less than a full buffer is read, the next
read would return EAGAIN.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 11:56:56 -06:00
Paolo Bonzini
41c872b6bf add qemu_get_clock_ns
Some places use get_clock directly because they want to access the
rt_clock with nanosecond precision.  Add a function to do exactly that
instead of using internal interfaces.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09 16:56:13 -06:00
Anthony Liguori
8217d94586 Merge remote branch 'qemu-kvm/uq/master' into staging-tmp 2010-02-08 10:06:54 -06:00
Paolo Bonzini
e8105ebb94 vl.c: avoid preprocessor directives in a printf call
Similar to the qemu-img.c patch, but I also have to unescape remaining
% signs in qemu-options.hx.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-02-08 12:12:40 +03:00
Paolo Bonzini
bec7c2d414 do not interpolate % from vl.c to qemu-options.h
Since qemu-options.h is only used in vl.c, we can avoid using
brittle interpolation from a generated file.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-02-08 12:12:40 +03:00
malc
3f020d7024 Revert "On some systems printf is a macro"
This reverts commit bc5b600458.
2010-02-08 12:12:40 +03:00
malc
bc5b600458 On some systems printf is a macro
Signed-off-by: malc <av1474@comtv.ru>
2010-02-07 02:04:28 +03:00
Paolo Bonzini
0dfbd51446 fix undefined shifts by >32
This one is for 0.12 too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-05 18:13:04 +00:00
Marcelo Tosatti
c5f32c99c6 Fix incoming migration with iothread
Do not allow the vcpus to execute if the vm is stopped.

Fixes -incoming with CONFIG_IOTHREAD enabled.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-02-03 21:44:17 -02:00
Sheng Yang
62a2744ca0 kvm: Flush coalesced MMIO buffer periodly
The default action of coalesced MMIO is, cache the writing in buffer, until:
1. The buffer is full.
2. Or the exit to QEmu due to other reasons.

But this would result in a very late writing in some condition.
1. The each time write to MMIO content is small.
2. The writing interval is big.
3. No need for input or accessing other devices frequently.

This issue was observed in a experimental embbed system. The test image
simply print "test" every 1 seconds. The output in QEmu meets expectation,
but the output in KVM is delayed for seconds.

Per Avi's suggestion, I hooked flushing coalesced MMIO buffer in VGA update
handler. By this way, We don't need vcpu explicit exit to QEmu to
handle this issue.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-02-03 19:47:33 -02:00
Markus Armbruster
ff952ba25d qdev: Fix exit code for -device ?
Help was shoehorned into device creation, qdev_device_add().  Since
help doesn't create a device, it returns NULL, which looks to callers
just like failed device creation.  Monitor handler do_device_add()
doesn't care, but main() exits unsuccessfully.

Move help out of device creation, into new qdev_device_help().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03 12:39:01 -06:00
Anthony Liguori
28e68d68b0 Fix regression in option parsing
Commit ec229bbe7 broke invocation without a specific -hda.  IOW, qemu foo.img.
The lack of an optind update caused an infinite loop.

Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-27 10:50:14 -06:00
Adam Litke
625a5befc2 virtio: Add memory statistics reporting to the balloon driver
When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests.  The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval.  The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure.  This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host.  A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 17:08:03 -06:00
Amit Shah
392ecf543d virtio-console: Automatically use virtio-serial-bus for the older -virtioconsole invocation
These hunks got dropped off mysteriously during the rebasing of my
virtio-serial series. Thanks go to Markus for noticing it.

Without these fixes, -virtioconsole doesn't actually have any effect.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 15:42:02 -06:00
Kirill A. Shutemov
dc330e282a vl.c: fix warning with _FORTIFY_SOURCE
CC    i386-softmmu/vl.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'qemu_event_increment':
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:3404: error: ignoring return value of 'write', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'main':
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:5774: error: ignoring return value of 'write', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6064: error: ignoring return value of 'chdir', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6083: error: ignoring return value of 'chdir', declared with attribute warn_unused_result
make[1]: *** [vl.o] Error 1

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 14:59:20 -06:00
Anthony Liguori
292444cb87 Load global config files by default
A new option, -nodefconfig is introduced to prevent loading from the default
config location.  Otherwise, two configuration files will be searched for,
qemu.conf and target-<TARGET_NAME>.conf.

To ensure that the default configuration is overridden by a user specified
config, we introduce a two stage option parsing mechanism.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-24 09:37:26 -06:00
Anthony Liguori
6530a97bdd Move out option lookup into a separate function
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-24 09:37:26 -06:00
Amit Shah
98b19252cf virtio-console: qdev conversion, new virtio-serial-bus
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.

The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.

This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.

As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using

    -virtioconsole ...

is maintained, but the new, preferred way is to use

    -device virtio-serial -device virtconsole,chardev=...

With this commit, multiple devices as well as multiple ports with a
single device can be supported.

For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.

In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.

This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:25:23 -06:00
Naphtali Sprei
f5edb014ed Clean-up a little bit the RW related bits of BDRV_O_FLAGS. BDRV_O_RDONLY gone (and so is BDRV_O_ACCESS). Default value for bdrv_flags (0/zero) is READ-ONLY. Need to explicitly request READ-WRITE.
Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.

Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:25:22 -06:00
Naphtali Sprei
b196b1532f Make CDROM a read-only drive
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:25:22 -06:00
Amit Shah
5cdc9b76e3 vl.c: Remove dead assignment
clang-analyzer pointed out the value of 'sockets' is never reused.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13 17:14:15 -06:00
Paolo Bonzini
8f0056b763 move kbd/mouse handling to input.c
Move 200 lines out of vl.c already into common code that only needs to
be compiled once.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13 17:14:14 -06:00
Jiri Denemark
3f7638ec40 Fix CPU topology initialization
Late initialization of CPU topology in CPUState prevents KVM guests to
actually see the topology.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11 09:56:30 -06:00
H. Peter Anvin
c9f398e53f debugcon: support for debugging consoles (e.g. Bochs port 0xe9)
Add generic support for debugging consoles (simple I/O ports which
when written to cause debugging output to be written to a target.)
The current implementation matches Bochs' port 0xe9, allowing the same
debugging code to be used for both Bochs and Qemu.

There is no vm state associated with the debugging port, simply
because it has none -- the entire interface is a single, stateless,
write-only port.

Most of the code was cribbed from the serial port driver.

v2: removed non-ISA variants (they can be introduced when/if someone
wants them, using code from the serial port); added configurable
readback (Bochs returns 0xe9 on a read from this register, mimic that
by default)  This retains the apparently somewhat controversial user
friendly option, however.

v3: reimplemented the user friendly option as a synthetic option
("-debugcon foo" basically ends up being a parser-level shorthand for
"-chardev stdio,id=debugcon -device isa-debugcon,chardev=debugcon") --
this dramatically reduced the complexity while keeping the same level
of user friendliness.

v4: spaces, not tabs.

v5: update to match current top of tree.  Calling qemu_chr_open()
already during parsing no longer works; defer until we are parsing the
other console-like devices.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08 09:58:40 -06:00
Scott Tsai
59d1c1c2d7 USB: Improve usbdevice error messages
When an non-existent USB device is specified on the command line,
print "qemu: could not add USB device 'X'".
Likewise for the usb_{add,del} monitor commands.

Signed-off-by: Scott Tsai <scottt.tw@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-23 07:25:56 +01:00
Juha Riihimäki
099fe236d5 fix pidfile option to work in WIN32
Explicit read/write locking pidfile under WIN32 is bit extreme
nobody get the chance to read the pidfile. Convert to a write-only lock.

Also, creating pidfile was disabled along with daemonize under
WIN32. Enable it, but do not enable daemon support which doesn't
exist under WIN32 atm.

From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18 23:23:56 +01:00
Gerd Hoffmann
69fd02eea6 fix vga names in default_list
Fix mismerge between 64465297 and 556cd098.

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:28 -06:00
Gerd Hoffmann
42be86ce95 usb-net: use qdev for -usbdevice
Rebased to master, adapted to device renaming by armbru,
no other changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:28 -06:00
Gerd Hoffmann
15ff770544 Check rom_load_all() return value.
Check rom_load_all() return value.
Also don't make option rom loading failure fatal.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:27 -06:00
Gerd Hoffmann
d8bcbabf26 defaults: update device_list[]
Add isa-fdc (disables default_floppy).
Add ide-drive (disables default_cdrom).

Also walk the -global QemuOpts, so we'll catch
-global isa-fdc.drive{A,B}=<name> too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:27 -06:00
Gerd Hoffmann
ac33f8fad1 defaults: split default_drive
Split default_drive into default_{floppy,cdrom,sdcard}.
Also add QEMUMachine flags to disable them per machine.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:27 -06:00