According to the M68040UM Appendix D the requirement for data accesses to be
word aligned is only for the 68000, 68008 and 68010 CPUs. Later CPUs from the
68020 onwards will allow unaligned data accesses but at the cost of being less
efficient.
Add a new M68K_FEATURE_UNALIGNED_DATA feature to specify that data accesses are
not required to be word aligned, and don't perform the alignment on the stack
pointer when taking an exception if this feature is not selected.
This is required because the MacOS DAFB driver attempts to call an A-trap
with a byte-aligned stack pointer during initialisation and without this the
stack pointer is off by one when the A-trap returns.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210308121155.2476-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move the feature comment from after the feature name to the preceding line to
allow for longer feature names and descriptions without hitting the 80
character line limit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210308121155.2476-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If a NuBus slot doesn't contain a card, the Quadra hardware generates a physical
bus error if the CPU attempts to access the slot address space. Both Linux and
MacOS use a separate bus error handler during NuBus accesses in order to detect
and recover when addressing empty slots.
According to the MC68040 users manual the ATC bit of the SSW is used to
distinguish between ATC faults and physical bus errors. MacOS specifically checks
the stack frame generated by a NuBus error and panics if the SSW ATC bit is set.
Update m68k_cpu_transaction_failed() so that the SSW ATC bit is not set if the
memory API returns MEMTX_DECODE_ERROR which will be used to indicate that an
access to an empty NuBus slot occurred.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210308121155.2476-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is needed to boot MacOS ROM.
Pull the condition code and the program counter from the stack.
Operation:
(SP) -> CCR
SP + 2 -> SP
(SP) -> PC
SP + 4 -> SP
This operation is not privileged.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210307212552.523552-1-laurent@vivier.eu>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().
Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210208113428.7181-3-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-12-alex.bennee@linaro.org>
On m68k there are two varities of stack pointers: USP with SSP or ISP/MSP.
Only the 68020/30/40 support the MSP register the stack swap helpers don't
support this feature.
This patch adds this support, as well as comments to CPUM68KState to
make it clear how stacks are handled
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c61ad2d8b39f3b03b431819b6bf602a1c332b921.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add CPU class detection for each CR type in the m68k_move_to/from helpers,
so that it throws and exception if an unsupported register is requested
for that CPU class.
Reclassified MOVEC insn. as only supported from 68010.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <fc0d0187478716f05d990949347071969b743151.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The BUSCR/PCR CR defines were missing for 68060, and the move_to/from helper
functions were also missing a decode for the 68060 M68K_CR_CAAR CR register.
Added missing defines, and respective decodes for all three CR registers to
the helpers.
Although this patch defines them, the implementation is empty in this patch
and these registers will result in a cpu abort - which is the default prior
to this patch.
This patch aims to reach full coverage of all CR registers within the helpers.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <19e5c0fa8baed6479ed0502fd3deb132d19457fb.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add more detailed comments to each case of m68k_move_to/from helpers to list
the supported CPUs for that CR as they were wrong in some cases, and
missing some cpu classes in other cases.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a8bd70b66e3dbdb7d2ab7a852af71cdbf341d50c.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The m680XX_cpu_initfn functions have been rearranged to cascade starting from
the base 68000, so that the 68010 then inherits from this, and so on until the
68060.
This makes it simpler to track features since in most cases the m68k were
product enhancements on each other, with only a few instructions being retired.
Because each cpu class inherits the previous CPU class, then for example
the 68020 also has the feature 68010, and 68000 and so on upto the 68060.
- Added 68010 cpu class, and moved correct features into 68000/68010.
- Added m68k_unset_feature to allow removing a feature in the inheritence
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c652fe7537f8b4fe87a13ecbbc0ea751fb71532f.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Improvement in comments for the instantiation functions.
This is to highlight what each cpu class, in the 68000 series, contains
in terms of instructions/features.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2dfe32672ee6ddce4b54c6bcfce579d35abeaf51.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY]
avoiding its use in headers used by common_ss code (should be poisoned).
Note: need to be careful with the use of CONFIG_USER_ONLY,
Message-Id: <20210204163931.7358-11-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
gdb_exit() has never needed anything from env and I doubt we are going
to start now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>
I found that there are many spelling errors in the comments of qemu/target/m68k.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Reviewed-by: Laurent Vivier<laurent@vivier.eu>
Message-Id: <20201009064449.2336-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
They are unused since the target has been converted to TCG.
Fixes: e1f3808e03 ("Convert m68k target to TCG.")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201022203000.1922749-2-laurent@vivier.eu>
Use the machine properties instead.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mon_get_cpu_env() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur_env(),
explicitly pass the Monitor pointer to the function.
Without this fix, an HMP command like "x $pc" crashes like this:
#0 0x0000555555caa01f in mon_get_cpu_sync (mon=0x0, synchronize=true) at ../monitor/misc.c:270
#1 0x0000555555caa141 in mon_get_cpu (mon=0x0) at ../monitor/misc.c:294
#2 0x0000555555caa158 in mon_get_cpu_env () at ../monitor/misc.c:299
#3 0x0000555555b19739 in monitor_get_pc (mon=0x555556ad2de0, md=0x5555565d2d40 <monitor_defs+1152>, val=0) at ../target/i386/monitor.c:607
#4 0x0000555555cadbec in get_monitor_def (mon=0x555556ad2de0, pval=0x7fffffffc208, name=0x7fffffffc220 "pc") at ../monitor/misc.c:1681
#5 0x000055555582ec4f in expr_unary (mon=0x555556ad2de0) at ../monitor/hmp.c:387
#6 0x000055555582edbb in expr_prod (mon=0x555556ad2de0) at ../monitor/hmp.c:421
#7 0x000055555582ee79 in expr_logic (mon=0x555556ad2de0) at ../monitor/hmp.c:455
#8 0x000055555582eefe in expr_sum (mon=0x555556ad2de0) at ../monitor/hmp.c:484
#9 0x000055555582efe8 in get_expr (mon=0x555556ad2de0, pval=0x7fffffffc418, pp=0x7fffffffc408) at ../monitor/hmp.c:511
#10 0x000055555582fcd4 in monitor_parse_arguments (mon=0x555556ad2de0, endp=0x7fffffffc890, cmd=0x555556675b50 <hmp_cmds+7920>) at ../monitor/hmp.c:876
#11 0x00005555558306a8 in handle_hmp_command (mon=0x555556ad2de0, cmdline=0x555556ada452 "$pc") at ../monitor/hmp.c:1087
#12 0x000055555582df14 in monitor_command_cb (opaque=0x555556ad2de0, cmdline=0x555556ada450 "x $pc", readline_opaque=0x0) at ../monitor/hmp.c:47
After this fix, nothing is left in monitor_parse_arguments() that can
indirectly call monitor_cur(), so the fix is complete.
Fixes: ff04108a0e
Reported-by: lichun <lichun@ruijie.com.cn>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-4-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since all callers to get_physical_address() now apply the same page offset to
the translation result, move the logic into get_physical_address() itself to
avoid duplication.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200701201531.13828-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The result of the get_physical_address() function should be combined with the
offset of the original page access before being returned. Otherwise the
m68k_cpu_get_phys_page_debug() function can round to the wrong page causing
incorrect lookups in gdbstub and various "Disassembler disagrees with
translator over instruction decoding" warnings to appear at translation time.
Fixes: 88b2fef6c3 ("target/m68k: add MC68040 MMU")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200701201531.13828-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The m68k-specific softfloat code includes a function floatx80_mod that
is extremely similar to floatx80_rem, but computing the remainder
based on truncating the quotient toward zero rather than rounding it
to nearest integer. This is also useful for emulating the x87 fprem
and fprem1 instructions. Change the floatx80_rem implementation into
floatx80_modrem that can perform either operation, with both
floatx80_rem and floatx80_mod as thin wrappers available for all
targets.
There does not appear to be any use for the _mod operation for other
floating-point formats in QEMU (the only other architectures using
_rem at all are linux-user/arm/nwfpe, for FPA emulation, and openrisc,
for instructions that have been removed in the latest version of the
architecture), so no change is made to the code for other formats.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081654280.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Give the previously unnamed enum a typedef name. Use the packed
attribute so that we do not affect the layout of the float_status
struct. Use it in the prototypes of relevant functions.
Adjust switch statements as necessary to avoid compiler warnings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have had this on the to-do list for quite some time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently "cf-core.xml" is sent to GDB when using any m68k flavor. Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.
This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:
(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes): \
00000000000[...]0000
With this patch: qemu-system-m68k -M none -cpu m68020 -s -S
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
When converted to use GByteArray in commits 462474d760 and
a010bdbe71, the call to stfq_p() was removed. This call
serialize a float.
Since we now use a GByteArray, we can not use stfq_p() directly.
Introduce the gdb_get_float64() helper to load a float64 register.
Fixes: 462474d760 ("target/m68k: use gdb_get_reg helpers")
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200414163853.12164-3-philmd@redhat.com>
Message-Id: <20200430190122.4592-3-alex.bennee@linaro.org>
Since a010bdbe71 the gdbstub API takes a GByteArray*. Unfortunately
we forgot to update the gdb_get_reg*() calls. Do it now.
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Reported-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200409172509.4078-1-philmd@redhat.com>
Message-Id: <20200414200631.12799-11-alex.bennee@linaro.org>
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
-----BEGIN PGP SIGNATURE-----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=9fEL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue for 5.0 soft freeze
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
hw/i386: Update structures to save the number of nodes per package
hw/i386: Remove unnecessary initialization in x86_cpu_new
machine: Add SMP Sockets in CpuTopology
hw/i386: Consolidate topology functions
hw/i386: Introduce X86CPUTopoInfo to contain topology info
cpu: Use DeviceClass reset instead of a special CPUClass reset
machine/memory encryption: Disable mem merge
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
i386: Add 2nd Generation AMD EPYC processors
i386: Add missing cpu feature bits in EPYC model
target/i386: Add new property note to versioned CPU models
target/i386: Add Denverton-v2 (no MPX) CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUClass has a 'reset' method. This is a legacy from when
TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any
more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()'
function is kept as the API which most places use to reset a CPU; it
is now a wrapper which calls device_cold_reset() and then the
tracepoint function.
This change should not cause CPU objects to be reset more often
than they are at the moment, because:
* nobody is directly calling device_cold_reset() or
qdev_reset_all() on CPU objects
* no CPU object is on a qbus, so they will not be reset either
by somebody calling qbus_reset_all()/bus_cold_reset(), or
by the main "reset sysbus and everything in the qbus tree"
reset that most devices are reset by
Note that this does not change the need for each machine or whatever
to use qemu_register_reset() to arrange to call cpu_reset() -- that
is necessary because CPU objects are not on any qbus, so they don't
get reset when the qbus tree rooted at the sysbus bus is reset, and
this isn't being changed here.
All the changes to the files under target/ were made using the
included Coccinelle script, except:
(1) the deletion of the now-inaccurate and not terribly useful
"CPUClass::reset" comments was done with a perl one-liner afterwards:
perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c
(2) this bit of the s390 change was done by hand, because the
Coccinelle script is not sophisticated enough to handle the
parent_reset call being inside another function:
| @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type)
| S390CPU *cpu = S390_CPU(s);
| S390CPUClass *scc = S390_CPU_GET_CLASS(cpu);
| CPUS390XState *env = &cpu->env;
|+ DeviceState *dev = DEVICE(s);
|
|- scc->parent_reset(s);
|+ scc->parent_reset(dev);
| cpu->env.sigp_order = 0;
| s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
This is cleaner than poking memory directly and will make later
clean-ups easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-13-alex.bennee@linaro.org>
Convert all targets to use cpu_class_set_parent_reset() with the following
coccinelle script:
@@
type CPUParentClass;
CPUParentClass *pcc;
CPUClass *cc;
identifier parent_fn;
identifier child_fn;
@@
+cpu_class_set_parent_reset(cc, child_fn, &pcc->parent_fn);
-pcc->parent_fn = cc->reset;
...
-cc->reset = child_fn;
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <157650847817.354886.7047137349018460524.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A regression that was introduced, with the refactor to TranslatorOps,
drops two lines that update the PC when single-stepping is being performed.
Fixes: 11ab74b01e ("target/m68k: Convert to TranslatorOps")
Reported-by: Lucien Murray-Pitts <lucienmp_antispam@yahoo.com>
Suggested-by: Lucien Murray-Pitts <lucienmp_antispam@yahoo.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200116165454.2076265-1-laurent@vivier.eu>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The generated *_user functions are unused. The *_kernel functions
have a couple of users in op_helper.c; use *_mmuidx_ra instead,
with MMU_KERNEL_IDX.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Use *_mmuidx_ra directly, without intermediate macros.
