Pass on the generic arguments unadulterated, and the machine-specific
ones as separate argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't explode when the variable is used just once, and never changed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'dprintf' is the name of a POSIX standard function so we should not be
stealing it for our debug macro. Rename to 'DPRINTF' (in line with
a number of other source files.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1375100199-13934-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Basically, in HW the layout of the interrupt network is:
- One ICP per processor thread (the "presenter"). This contains the
registers to fetch a pending interrupt (ack), EOI, and control the
processor priority.
- One ICS per logical source of interrupts (ie, one per PCI host
bridge, and a few others here or there). This contains the per-interrupt
source configuration (target processor(s), priority, mask) and the
per-interrupt internal state.
Under PAPR, there is a single "virtual" ICS ... somewhat (it's a bit
oddball what pHyp does here, arguably there are two but we can ignore
that distinction). There is no register level access. A pair of firmware
(RTAS) calls is used to configure each virtual interrupt.
So our model here is somewhat the same. We have one ICS in the emulated
XICS which arguably *is* the emulated XICS, there's no point making it a
separate "device", that would just be gross, and each VCPU has an
associated ICP.
Yet we call the "XICS" struct icp_state and then the ICPs
'struct icp_server_state'. It's particularly confusing when all of the
functions have xics_prefixes yet take *icp arguments.
Rename:
struct icp_state -> XICSState
struct icp_server_state -> ICPState
struct ics_state -> ICSState
struct ics_irq_state -> ICSIRQState
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-12-git-send-email-aliguori@us.ibm.com
[aik: added ics_resend() on post_load]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled. That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it. This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary support for saving the state of the PAPR virtual
PCI host bridge (or host bridges).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-10-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary pieces to implement savevm / migration for the
pseries machine. The most complex part here is migrating the hash
table - for the paravirtualized pseries machine the guest's hash page
table is not stored within guest memory, but externally and the guest
accesses it via hypercalls.
This patch uses a hypervisor reserved bit of the HPTE as a dirty bit
(tracking changes to the HPTE itself, not the page it references).
This is used to implement a live migration style incremental save and
restore of the hash table contents.
Normally a hash table is 16MB but it can get bigger depending on how
much RAM the guest has. Due to its nature, updates to it are random so
the live migration style is used for it.
In addition it adds VMStateDescription information to save and restore
the (few) remaining pieces of state information needed by the pseries
machine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-9-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Model TCE tables as a device that's hooked up as a child object to
the owner. Besides the code cleanup, we get a few nice benefits:
1) free actually works now (it was dead code before)
2) the TCE information is visible in the device tree
3) we can expose table information as properties such that if we
change the window_size, we can use globals to keep migration
working.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds helpers to allow PAPR VIO devices to save state common
to all VIO devices during savevm.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes endianness bugs in I/O port access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-10-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Do not swap endianness here, it will happen during cpu_{in,out}{b,w,l}.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes endianness bugs in I/O port access.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes endianness bugs in I/O port access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes endianness bugs in I/O port access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We should only start processing DMA requests when we have data to process.
Hold off working through the DMA shuffling until the IDE core told us that
it's ready.
This is required because the guest can program the DMA engine or the IDE
transfer first. Both are legal.
Signed-off-by: Alexander Graf <agraf@suse.de>
We need to know when the IDE core starts a DMA transfer. Add a notifier
function so we have the chance to start transmitting data.
Signed-off-by: Alexander Graf <agraf@suse.de>
On a real G3 Beige the secondary IDE bus lives on the mac-io chip, not
on some random PCI device. Move it there to become more compatible.
While at it, also clean up the IDE channel connection logic.
Signed-off-by: Alexander Graf <agraf@suse.de>
We can tell the guest the frequency of its time base through fwcfg.
However, we tell it a different value from the speed tb actually runs
at. Let's fix it and make the tbfreq initialization and the fwcfg exposure
use the same values.
Signed-off-by: Alexander Graf <agraf@suse.de>
Allow the user to override the firmware file name rather than always
using "slof.bin".
Reported-by: Dinar Valeev <k0da@opensuse.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The function returned a target_ulong which was made from unnamed enum
values. The target_ulong was then assigned to an int variable which
was used in a switch statement.
Using a named enum in both cases makes reviews easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
i686-w64-mingw32-gcc (GCC) 4.6.3 from Debian wheezy reports these warnings:
hw/ppc/spapr_hcall.c:188:1: warning:
control reaches end of non-void function [-Wreturn-type]
hw/ppc/spapr_pci.c:454:1: warning:
control reaches end of non-void function [-Wreturn-type]
Both warnings are fixed by using g_assert_not_reached instead of assert.
A second line with assert(0) in spapr_pci.c which did not raise a compiler
warning was modified, too, because g_assert_not_reached documents the
purpose of that statement and is not removed in release builds.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since current_cpu is CPUState it no longer depends on CPUPPCState.
Move ppce500_set_mpic_proxy() to a new hw/ppc/ppc_e500.h because
hw/ppc/ppc.h is too heavily using CPUPPCState and PowerPCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The previous two commits fixed bugs in -machine option queries. I
can't find fault with the remaining queries, but let's use
qemu_get_machine_opts() everywhere, for consistency, simplicity and
robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Multiple -machine options with the same ID are merged. All but the
one without an ID are to be silently ignored.
In most places, we query these options with a null ID. This is
correct.
In some places, we instead query whatever options come first in the
list. This is wrong. When the -machine processed first happens to
have an ID, options are taken from that ID, and the ones specified
without ID are silently ignored.
Example:
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: disabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
USB support not enabled
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
xen be core: can't open xen interface
failed to initialize Xen: Operation not permitted
Option usb is queried correctly, and the one without an ID wins,
regardless of option order.
Option accel is queried incorrectly, and which one wins depends on
option order and ID.
Affected options are accel (and its sugared forms -enable-kvm and
-no-kvm), kernel_irqchip, kvm_shadow_mem.
Additionally, option kernel_irqchip is normally on by default, except
it's off when no -machine options are given. Bug can't bite, because
kernel_irqchip is used only when KVM is enabled, KVM is off by
default, and enabling always creates -machine options. Downstreams
that enable KVM by default do get bitten, though.
Use qemu_get_machine_opts() to fix these bugs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
=gxxc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,misc enhancements
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: Fold host_buses list into PCIHostState functionality
pci: Remove domain from PCIHostBus
pci: Simpler implementation of primary PCI bus
pci: Add root bus parameter to pci_nic_init()
pci: Add root bus argument to pci_get_bus_devfn()
pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci: Use helper to find device's root bus in pci_find_domain()
pci: Abolish pci_find_root_bus()
pci: Move pci_read_devaddr to pci-hotplug-old.c
pci: Cleanup configuration for pci-hotplug.c
pvpanic: fix fwcfg for big endian hosts
pvpanic: initialization cleanup
MAINTAINERS: s/Marcelo/Paolo/
e1000: cleanup process_tx_desc
pc_piix: cleanup init compat handling
pc: pass PCI hole ranges to Guests
pci: store PCI hole ranges in guestinfo structure
range: add Range structure
Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root. As we add support for
multiple PCI roots, that may no longer be the case. This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters. NICs created new-style, with
-device can of course be put anywhere.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_domain() is used in a number of places where we want an id for a
whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is
that many platforms may support multiple independent host bridges with no
hardware supplied notion of domain number.
This patch, therefore, replaces calls to pci_find_domain() with calls to
a new pci_root_bus_path() returning a string. The new call is implemented
in terms of a new callback in the host bridge class, so it can be defined
in some way that's well defined for the platform. When no callback is
available we fall back on the qbus name.
Most current uses of pci_find_domain() are for error or informational
messages, so the change in identifiers should be harmless. The exception
is pci_get_dev_path(), whose results form part of migration streams. To
maintain compatibility with old migration streams, the PIIX PCI host is
altered to always supply "0000" for this path, which matches the old domain
number (since the code didn't actually support domains other than 0).
For the pseries (spapr) PCI bridge we use a different platform-unique
identifier (pseries machines can routinely have dozens of PCI host
bridges). Theoretically that breaks migration streams, but given that we
don't yet have migration support for pseries, it doesn't matter.
Any other machines that have working migration support including PCI
devices will need to be updated to maintain migration stream compatibility.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert over to memory regions to obsolete register_ioport*.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mac OS X requires a second uninorth register set to be mapped a few
bytes above the first one. Let's just expose it to make it happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X expects the uninorth control register set to contain one
register that always reads back what it writes in. Expose that.
This is just a temporary hack. Eventually, we want to expose the
uninorth (/uni-n in device tree) as a separate QOM device.
Signed-off-by: Alexander Graf <agraf@suse.de>
Support in fwcfg has been around for exposure of the clock-frequency
CPU property. OpenBIOS reads it, we just never exposed it.
Since Mac OS X is very picky about its clock frequency values, let's
just take a known good value and always expose that.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
Limit watchdog and fit timer to maximum timeout value which
qemu timer can support (INT64_MAX). This maximum timeout will be
hundreds of years, so limiting to max timeout is pretty safe.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This kind of type cast must use uintptr_t or target_ulong to be portable
for hosts with sizeof(void *) != sizeof(long).
Here the value is assigned to a variable of type target_ulong.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
RTAS is a hypervisor provided binary blob that a guest loads and
calls into to execute certain functions. It's similar to the
vsyscall page in Linux or the short lived VMCI paravirt interface
from VMware.
The QEMU implementation of the RTAS blob is simply a passthrough
that proxies all RTAS calls to the hypervisor via an hypercall.
While we pass a CPU argument for hypercall handling in QEMU, we
don't pass it for RTAS calls. Since some RTAs calls require
making hypercalls (normally RTAS is implemented as guest code) we
have nasty hacks to allow that.
Add a CPU argument to RTAS call handling so we can more easily
invoke hypercalls just as guest code would.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, for qemu-system-ppc64, the default machine type is 'mac99'.
The mac99 machine is not being actively maintained, and represents a
bizarre hybrid of components that never actually existed as a real system.
This patch changes the default machine to 'pseries', which is actively
maintained and works well with most modern ppc64 Linux distributions as a
guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: adjust commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
SysBus can deal with NULL SysBusDeviceClass::init since 4ce5dae.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant, cast macro and rename parent field.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant and cast macro.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).
Note from Alex regarding kvm_irqchip_create():
On x86, one would call kvm_irqchip_create() to initialize an
in-kernel interrupt controller. That function then goes ahead and
initializes global capability variables as well as the default irq
routing table.
On ppc, we can't call kvm_irqchip_create() because we can have
different types of interrupt controllers. So we want to do all the
things that function would do for us in the in-kernel device init
handler.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
KVM in-kernel MPIC support is going to expand this even more,
so let's keep it contained.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer relies on CPUArchState since 20d695a.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The "info mtree" command in QEMU console prints only "memory" and "I/O"
address spaces while there are actually a lot more other AddressSpace
structs created by PCI and VIO devices. Those devices do not normally
have names and therefore not present in "info mtree" output.
The patch fixes this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fetch the root region from the sPAPRTCETable, and use it to build
an AddressSpace and DMAContext.
Now, everywhere we have a DMAContext we also have access to the
corresponding AddressSpace (either because we create it just before
the DMAContext, or because dma_context_memory's AddressSpace is
trivially address_space_memory).
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new iommu support in the memory core for iommu support. The only
user, spapr, is also converted, but it still provides a DMAContext
interface until the non-PCI bits switch to AddressSpace.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Do not calls memory_region_del_subregion() on the device's
bus_master_enable_region, it is an alias; return an AddressSpace
from the IOMMU hook and remove the destructor hook. - David Gibson ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The translate function in the DMAContext is now always NULL.
Remove every reference to it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we can stop using a "translating" DMAContext, but we do not yet modify
the sPAPRTCETable users to get an AddressSpace; they keep using the table
via a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next step is to introduce the translation code that will be used for
IOMMU MemoryRegions, but still do the actual translation in a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TCE table is currently returned as a DMAContext, and non-type-safe
APIs are called later passing back the DMAContext. Since we want to move
away from DMAContext, use an opaque type instead, and add an accessor
to retrieve the DMAContext from it.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Paolo Bonzini (4) and others
# Via Peter Maydell
* pmaydell/configury.next:
ppc: Remove CONFIG_FDT conditionals
microblaze: Remove CONFIG_FDT conditionals
arm: Remove CONFIG_FDT conditionals
configure: Require libfdt for arm, ppc, microblaze softmmu targets
configure: dtc: Probe for libfdt_env.h
build: drop TARGET_TYPE
main: use TARGET_ARCH only for the target-specific #define
build: do not use TARGET_ARCH
build: rename TARGET_ARCH2 to TARGET_NAME
Add a stp file for usage from build directory
Message-id: 1371221594-11556-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
qdev: Drop FROM_QBUS() macro
isa: QOM'ify ISADevice
isa: QOM'ify ISABus
i8259: Convert PICCommonState to use QOM realizefn
kvm/i8259: QOM'ify some more
i8259: QOM'ify some more
i8254: Convert PITCommonState to QOM realizefn
kvm/i8254: QOM'ify some more
i8254: QOM'ify some more
isa: Use realizefn for ISADevice
cs4231a: QOM'ify some more
gus: QOM'ify some more
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
Instead of looping over all CPUArchState, use a helper to obtain the
desired CPUState.
Free the "cpu" variable for PowerPCCPU, to access its CPUPPCState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of looping over all CPUArchState, use a helper to obtain the
desired CPUState directly. Saves a CPUPPCState variable and QOM cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We should sync params->ram_size after we fixup memory size on
a alignment boundary. Otherwise Guest would exceed the actual
memory region.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
ePAPR defines the initial values of cpu registers.
This patch initialize the GPRs as per ePAPR specification.
This resolves the issue of guest reboot/reset (guest hang on reboot).
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: add whitespace line]
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to a brain outage, this message says "out-of-boards" instead of
"out-of-bounds".
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR defines LIOBNs (Logical IO Bus Numbers) to be 32-bit, and we check for
values that aren't in the code for H_PUT_TCE. This patch factors the check
into spapr_tce_find_by_liobn(), which already checks if a 32-bit LIOBN
actually exists. This will become more important as future patches add
other hypercalls which need to look up a LIOBN.
At the same time we fix the typo in the message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Port 0x0092 is documented as read/write, so for now return the
endianness state instead of hardcoded 0x00.
Signed-off-by: Julio Guerra <guerr@julio.in>
[AF: Extracted from larger port 0092 patch]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This prepares for switching from OpenHack'Ware to OpenBIOS.
While touching the error handling code, switch from aborting hw_error()
to fprintf()+exit() and suppress failing without -bios for qtest.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
The value was changed by commit 09d9828ace
"PPC: fix hreset_vector for 60x, ...".
Change it back for prep machine to unbreak OpenHack'Ware.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This patch implements a get_dev_path qdev hook for the pseries paravirtual
VIO bus. With upcoming savevm support, this will become very important for
scsi disks hanging of VIO virtual SCSI adapters. scsibus_get_dev_path
uses the get_dev_path of the parent adapter if available, but otherwise
just uses a local channel/target/lun number to identify the device. So if
two disks are present in the system having the same target and lun on
seperate VIO scsi adapters, savevm cannot distinguish them. Since the
conventional way of using VSCSI adapters is to have just one disk per
adapter, such a conflict is very likely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Curerntly the pseries VIO device code contains quite a few explicit
uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe,
and not the conventional way of doing things in the QOM model. This
patch converts the code to use the QOM convention of per-type macros
to do verified casts with OBJECT_CHECK().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Under certain circumstances the emulation for the pseries "XICS" interrupt
controller was clearing a pending interrupt from the XISR register, without
also clearing the corresponding priority variable. This will cause
problems later when can trigger sanity checks in the under-development
in-kernel XICS implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR requires that the device tree's CPU nodes have several properties
with information about the L1 cache. We already create two of these
properties, but with incorrect names - "[id]cache-block-size" instead
of "[id]-cache-block-size" (note the extra hyphen).
We were also missing some of the required cache properties. This
patch adds the [id]-cache-line-size properties (which have the same
values as the block size properties in all current cases). We also
add the [id]-cache-size properties.
Adding the cache sizes requires some extra infrastructure in the
general target-ppc code to (optionally) set the cache sizes for
various CPUs. The CPU family descriptions in translate_init.c can set
these sizes - this patch adds correct information for POWER7, I'm
leaving other CPU types to people who have a physical example to
verify against. In addition, for -cpu host we take the values
advertised by the host (if available) and use those to override the
information based on PVR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
On -M mac99, we can run 970 CPUs. However, these CPUs define the initial
instruction pointer they start execution at as part of their bootup protocol,
so effectively it's up to the board to decide where they start.
This went unnoticed, because they used to boot at the same location our flash
was mapped to, but due to the recent reset changes our 970 CPUs want to reset
to 0x100 now, which is always a 0 instruction.
Set the initial IP to something reasonable for -M mac99.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Enable the KVM emulated watchdog if KVM supports (use the
capability enablement in watchdog handler). Also watchdog exit
(KVM_EXIT_WATCHDOG) handling is added.
Watchdog state machine is cleared whenever VM state changes to running.
This is to handle the cases like return from debug halt etc.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: rebase to current code base, fix non-kvm cases]
Signed-off-by: Alexander Graf <agraf@suse.de>
This value is not needed if we use correctly the MSR[IP] bit.
excp_prefix is always 0x00000000, except when the MSR[IP] bit is
implemented and set to 1, in that case excp_prefix is 0xfff00000.
The handling of MSR[IP] was already implemented but not used at reset
because the value of env->msr was changed "manually".
The patch uses the function hreg_store_msr() to set env->msr, this
ensures a good handling of MSR[IP] at reset, and therefore a good value
for excp_prefix.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Older KVM versions don't support EPR which breaks guests when we announce
MPIC variants that support EPR.
Catch that case and expose only MPIC version 2.0 which tells the guest that
we don't support the EPR capability yet.
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: Add comment, route cap check through kvm_ppc.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
cpu_physical_memory_read, cpu_physical_memory_write take any pointer
as 2nd argument without needing a type cast.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On real hardware the ppc hash page table is stored in memory; accordingly
our mmu emulation code can read a hash page table in guest memory. But,
when paravirtualized under PAPR, the real hash page table is in host
memory, accessible to the guest only via hypercalls. We model this by
also allowing the MMU emulation code to access a specially allocated hash
page table outside the guest's memory image. At present these two options
are implemented with some ugly conditionals at each access point in the mmu
emulation code. In the implementation of the PAPR hypercalls, we assume
the external hash table.
This patch cleans things up by adding helpers to load and store from the
hash table for both 32-bit and 64-bit hash mmus. The 64-bit versions
handle both the in-guest-memory and outside guest memory cases. The 32-bit
versions only handle the in-guest-memory case since no 32-bit systems can
have an external hash table at present.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently cpu.h contains a number of definitions relating to the 64-bit
hash MMU. Some are used in the MMU emulation code, but some are only used
in the spapr MMU management hcall implementations.
This patch moves these definitions (except for a few that are needed
more widely) into mmu-hash64.h header, shared between the MMU emulation
code and the spapr hcall code. The MMU emulation code is also updated to
actually use a number of those definitions in place of hard coded
constants.
Similarly, we add new analogous definitions to mmu-hash32.h and use those
in place of many hard-coded constants in mmu-hash32.c
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix 32-bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, the pseries machine initializes the cpus, then the XICS
interrupt controller. However, to support the upcoming in-kernel XICS
implementation we will need to initialize the irq controller before the
vcpus. This patch makes the necesssary rearrangement. This means the
xics init code can no longer auto-detect the number of cpus ("interrupt
servers" in XICS terminology) and so we must pass that in explicitly from
the platform code.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the "spapr-pci-host-bridge" device has a "busname" property which
can be used to override the default assignment of qbus names for the bus
subordinate to the PHB. We use that for the default primary PCI bus, to
make libvirt happy, which expects there to be a bus named simply "pci".
The default qdev core logic would name the bus "pci.0", and the pseries
code would otherwise name it "pci@800000020000000" which is the name it
is given in the device tree based on its BUID.
The "busname" property is rather clunky though, so this patch simplifies
things by just using a special case hack for the default PHB, setting
busname to "pci" when index=0.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 259186a7d2 "cpu: Move halted and
interrupt_request fields to CPUState" broke the pseries machine. That's
because it uses CPU() instead of ENV_GET_CPU() to convert from the global
first_cpu pointer (still a CPUArchState) to a CPUState. This patch fixes
the breakage.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
* origin/master: (75 commits)
tcg: Don't make exitreq flag a local temporary
Makefile: Add subdir dependency on config-devices-all.mak
make_device_config.sh: Emit dependency file to directory where included
Revert "make_device_config.sh: Fix target path in generated dependency file"
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
...
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In openbios (drivers/ide.c) they are set to
0000000d 00000000 00000002 00000000
0000000e 00000000 00000003 00000000
0000000f 00000000 00000004 00000000
(The last one seems to be not implemented in qemu)
It follows convention of how they are set on real machines,
both ide and dma ones are increased
Real machine one:
http://web.archive.org/web/20090107151044/http://penguinppc.org/historical/dev-trees-html/g4_agp_500_2.html
00000013 00000001 0000000b 00000000
00000014 00000001 0000000c 00000000
00000015 00000001 0000000d 00000000
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The address_space field of PCIHostState was only ever written, never used.
Drop it completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since we still need env for ppc-specific fields, obtain it via the new
env_ptr fields to avoid "cpu" name conflicts between CPUState and
PowerPCCPU for now.
This fixes a potential issue with env being NULL at the end of the loop
but cpu still being a valid pointer corresponding to a previous env.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Andreas Färber
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Move PReP machine to hw/ppc/
prep_pci: Convert to QOM realizefn
prep_pci: Create PCIBus and PCIDevice in-place
PC will not use max_cpus for that field, so move it outside the common
code so it can use a different value on PC.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The compatible string is changed to fsl,mpic on all e500 platforms, to
advertise the existence of BRR1. This matches what the device tree will
have on real hardware.
With MPIC v4.2 max_cpu can be increased from 15 to 32.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
MPIC+0xa0 is IACK for the current CPU. MPIC+0x200a0 is IACK for CPU 0.
This fix allows EPR to work with an SMP target.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Replace the global adb_bus with a CUDA-internal one, accessed using
regular qdev child bus accessor.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
They were not qdev'ified before. Derive ADBDevice from DeviceState and
convert reset callbacks to DeviceClass::reset, ADBDevice::opaque pointer
to ADBDevice subtypes for mouse and keyboard and adb_{kbd,mouse}_init()
to regular qdev functions.
Fixing Coding Style issues and splitting keyboard and mouse off into
their own files is left for a later point in time.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was not qdev'ified before. Turn it into a SysBusDevice and embed it
in MacIO.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was not qdev'ified before. Turn it into a SysBusDevice.
Embed them into the MacIO devices.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was not qdev'ified before. Turn it into a SysBusDevice and
initialize it via static properties.
Prepare Old World specific MacIO state and embed the NVRAM state there.
Drop macio_nvram_setup_bar() in favor of sysbus_mmio_map() or
direct use of Memory API.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The state data field is accessed in uint8_t quantities, so switch from
uint32_t argument and return value to uint8_t.
Fix debug format specifiers while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Let the machines create two different types. This prepares to move
knowledge about sub-devices from the machines into the devices.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.
Resolve a Coding Style warning in openpic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Today, we load
<kernel> <initrd> <dtb>
into memory in that order. However, Linux has a bug where it can only
handle the dtb if it's within the first 64MB of where <kernel> starts.
So instead, let's change the order to
<kernel> <dtb> <initrd>
making Linux happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have 3 blobs we need to load when booting the system:
- kernel
- initrd
- dtb
We place them in physical memory in that order. At least we should.
This patch fixes the location calculation up to take any module into
account, fixing the dtb offset along the way.
Reported-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch makes default boot order machine specific instead of
set globally. The default boot order can be set per machine in
QEMUMachine boot_order. This also allows a machine to receive a
NULL boot order when -boot isn't used and take an appropriate action
accordingly. This helps machine boots from the devices as set in
guest's non-volatile memory location in case no boot order is
provided by the user.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avik Sil <aviksil@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
We already used to support the external proxy facility of FSL MPICs,
but only implemented it halfway correctly.
This patch adds support for
* dynamic enablement of the EPR facility
* interrupt acknowledgement only when the interrupt is delivered
This way the implementation now is closer to real hardware.
Signed-off-by: Alexander Graf <agraf@suse.de>
On e500mc, the platform doesn't provide a way for the CPU to go idle.
To still not uselessly burn CPU time, expose an idle hypercall to the guest
if kvm supports it.
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: adjust for current code base, add patch description, fix non-kvm case]
Signed-off-by: Alexander Graf <agraf@suse.de>
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed. Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need the calculation method to get from a PCI slot ID to its respective
interrupt line twice. Once in the internal map function and once when
assembling the device tree.
So let's extract the calculation to a separate function that can be called
by both users.
Signed-off-by: Alexander Graf <agraf@suse.de>
The ppce500 machine doesn't have to stick to hardware limitations,
as it's defined as being fully device tree based.
Thus we can change the initial PCI slot ID to 0x1 which gives us a
whopping 31 PCI devices we can support with this machine now!
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a params struct that allows us to expose differences between
e500 machine models. Include PCI slot information there, so we can have
different machines with different PCI slot topology.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we're hardcoding the PCI interrupt map in the e500 machine file.
Instead, let's write it dynamically so that different machine types
can have different slot properties.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that our interrupt controller supports MSIs, let's expose that feature
to the guest through the device tree!
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch converts the OpenPIC device to qdev. Along the way it
renames the "openpic" target to "raven" and the "mpic" target to
"fsl_mpic_20", to better reflect the actual models they implement.
This way we have a generic OpenPIC device now that can handle
different flavors of the OpenPIC specification.
Signed-off-by: Alexander Graf <agraf@suse.de>
The current openpic emulation contains half-ready code for bypass mode.
Remove it, so that when someone wants to finish it they can start from a
clean state.
Signed-off-by: Alexander Graf <agraf@suse.de>
MPIC interrupt numbers in Linux (device tree) and in QEMU are different,
because QEMU takes the sparseness of the IRQ number space into account.
Remove that cleverness and instead assume a flat number space. This makes
the code easier to understand, because we are actually aligned with Linux
on the view of our worlds.
Signed-off-by: Alexander Graf <agraf@suse.de>
PCI Root complex have TYPE-1 configuration header while PCI endpoint
have type-0 configuration header. The type-1 configuration header have
a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci
address space to CCSR address space. This can used for 2 purposes: 1)
for MSI interrupt generation 2) Allow CCSR registers access when configured
as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest.
What I observed is that when guest read the size of BAR0 of host controller
configuration header (TYPE1 header) then it always reads it as 0. When
looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller
device registering BAR0. I do not find any other controller also doing so
may they do not use BAR0.
There are two issues when BAR0 is not there (which I can think of):
1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and
when reading the size of BAR0, it should give size as per real h/w.
2) Do we need this BAR0 inbound address translation?
When BAR0 is of non-zero size then it will be configured for PCI
address space to local address(CCSR) space translation on inbound access.
The primary use case is for MSI interrupt generation. The device is
configured with an address offsets in PCI address space, which will be
translated to MSI interrupt generation MPIC registers. Currently I do
not understand the MSI interrupt generation mechanism in QEMU and also
IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines.
But this BAR0 will be used when using MSI on e500.
I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c,
but i do not see these being used for address translation.
So far that works because pci address space and local address space are 1:1
mapped. BAR0 inbound translation + ATMU translation will complete the address
translation of inbound traffic.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: fix double variable assignment w/o read]
Signed-off-by: Alexander Graf <agraf@suse.de>
All devices are also placed under CCSR memory region.
The CCSR memory region is exported to pci device. The MSI interrupt
generation is the main reason to export the CCSR region to PCI device.
This put the requirement to move mpic under CCSR region, but logically
all devices should be under CCSR. So this patch places all emulated
devices under ccsr region.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PAPR specification requires a certain amount of NVRAM, accessed via
RTAS, which we don't currently implement in qemu. This patch addresses
this deficiency, implementing the NVRAM as a VIO device, with some glue to
instantiate it automatically based on a machine option.
The machine option specifies a drive id, which is used to back the NVRAM,
making it persistent. If nothing is specified, the driver instead simply
allocates space for the NVRAM, which will not be persistent
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, we don't have PIO. So usually PIO space behind a PCI bridge is
accessible via MMIO. Do this mapping explicitly by mapping the PIO space
of our PCI bus into a memory region that lives in memory space.
Signed-off-by: Alexander Graf <agraf@suse.de>
At present, using 'system_powerdown' from the monitor or otherwise
instructing qemu to (cleanly) shut down a pseries guest will not work,
because we did not have a method of signalling the shutdown request to the
guest.
PAPR does include a usable mechanism for this, though it is rather more
involved than the equivalent on x86. This involves sending an EPOW
(Environmental and POwer Warning) event through the PAPR event and error
logging mechanism, which also has a number of other functions.
This patch implements just enough of the event/error logging functionality
to be able to send a shutdown event to the guest. At least with modern
guest kernels and a userspace that is up and running, this means that
system_powerdown from the qemu monitor should now work correctly on pseries
guests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
it was wrongly using serial_hds[0] instead of serial_hds[1]
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should help us to:
- More easily add or remove machine initialization arguments without
having to change every single machine init function;
- More easily make mechanical changes involving the machine init
functions in the future;
- Let machine initialization forward the init arguments to other
functions more easily.
This change was half-mechanical process: first the struct was added with
the local ram_size, boot_device, kernel_*, initrd_*, and cpu_model local
variable initialization to all functions. Then the compiler helped me
locate the local variables that are unused, so they could be removed.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When booting our e500 machine, we automatically generate a big TLB entry
in TLB1 that covers all of the code we need to run in there until the guest
can handle its TLB on its own.
However, e500v2 can only handle MAS1.0 sizes. However, we keep our TLB
information in MAS2.0 layout, which means we have twice as many TLB sizes
to choose from. That also means we can run into a situation where we try
to add a TLB size that could not fit into the MAS1.0 size bits.
Fix it by making sure we always have the lower bit set to 0. That way we
are always guaranteed to have MAS1.0 compatible TLB size information.
Signed-off-by: Alexander Graf <agraf@suse.de>
While investigating dtb pad issues, I noticed that initrd_base wasn't taking
loadaddr into account the way dt_base was. This seems wrong.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
An allowance of 5 MiB for BSS is not enough for Linux kernels with certain
debug options enabled (not sure exactly which one caused it, but I'd guess
lockdep). The kernel I ran into this with had a BSS of around 6.4 MB.
Unfortunately, uImage does not give us enough information to determine the
actual BSS size. Increase the allowance to 18 MiB to give us plenty of
room. Eventually this should be more intelligent, possibly packing
initrd+dtb at the end of guest RAM.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This reverts commit 518c7fb44f. It breaks
new Linux guests with SMP, because IPIs get mapped to large vectors which
our MPIC emulation does not implement.
Conflicts:
hw/ppc/e500.c
This gives the kernel a paravirtualized machine to target, without
requiring both sides to pretend to be targeting a specific board
that likely has little to do with the host in KVM scenarios. This
avoids the need to add new boards to QEMU, just to be able to
run KVM on new CPUs.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the only mpc8544ds-ism that is factored out is
toplevel compatible and model. In the future the generic e500
code is expected to become more generic.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
No functional changes -- machine is still outwardly mpc8544ds.
The references that are not changed contain mpc8544 hardware details that
need to be parameterized if/when a different e500 platform wants to
change them.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Rename the file (with no changes other than fixing up the header paths)
in preparation for refactoring into a generic e500 platform. Also move
it into the newly created ppc/ directory.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices. This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.
This patch converts this code to make use of the new common IOMMU
infrastructure.
We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.
Cc: Alex Graf <agraf@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that we're moving all of the device tree generation from an external
pre-execution generated blob to runtime generation using libfdt, we absolutely
must have libfdt around.
This requirement was there before already, as the only way to not require libfdt
with e500 was to not use -kernel, which was the only way to boot the mpc8544ds
machine. This patch only manifests said requirement in the build system.
Signed-off-by: Alexander Graf <agraf@suse.de>
Speeds up the build.
xilinx_ethlite uses tswap32() and is thus target-dependent.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The file is located in target-ppc/, not hw/.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
