Instantiate the whole clock tree and using the Clock multiplexers and
the PLLs defined in the previous commits. This allows to statically
define the clock tree and easily follow the clock signal from one end to
another.
Also handle three-phase reset now that we have defined a known base
state for every object.
(Reset handling based on hw/misc/zynq_sclr.c)
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object represents the PLLs and their channels. The PLLs allow for a
more fine-grained control of the clocks frequency.
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object is used to represent every multiplexer in the clock tree as
well as every clock output, every presecaler, frequency multiplier, etc.
This allows to use a generic approach for every component of the clock tree
(except the PLLs).
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add the necessary files to add a simple RCC implementation with just
reads from and writes to registers. Also instantiate the RCC in the
STM32L4x5_SoC. It is needed for accurate emulation of all the SoC
clocks and timers.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds loopback for sent characters, sent BREAK,
and modem-control signals.
Loopback of send and modem-control is often used for uart
self tests in real hardware but missing from current pl011
model, resulting in self-test failures when running in QEMU.
This implementation matches what is observed in real pl011
hardware placed in loopback mode:
1. Input characters and BREAK events from serial backend
are ignored, but
2. Both TX characters and BREAK events are still sent to
serial backend, in addition to be looped back to RX.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240227054855.44204-1-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simple testcase for validating proper operation of read and write for all
three BSC controllers.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240224191038.2409945-4-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BCM2835 has three I2C controllers. All of them share the same interrupt line.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A few deficiencies in the current device model need to be noted.
1. FIFOs are not used. All sends and receives are done directly.
2. Repeated starts are not emulated. Repeated starts can be triggered in real
hardware by sending a new read transfer request in the window time between
transfer active set of write transfer request and done bit set of the same.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240224191038.2409945-2-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Bryan's fix on multifd compression level API
- Fabiano's mapped-ram series (base + multifd only)
- Steve's amend on cpr document in qapi/
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZeUjKhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbv5QD/ZexBUsmZA5qyxgGvZ2yvlUBEGNOvtmKY
kRdiYPU7khMA/0N43rn4LcqKCoq4+T+EAnYizGjIyhH/7BRUyn4DUxgO
=AeEn
-----END PGP SIGNATURE-----
Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Migartion pull request for 20240304
- Bryan's fix on multifd compression level API
- Fabiano's mapped-ram series (base + multifd only)
- Steve's amend on cpr document in qapi/
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZeUjKhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbv5QD/ZexBUsmZA5qyxgGvZ2yvlUBEGNOvtmKY
# kRdiYPU7khMA/0N43rn4LcqKCoq4+T+EAnYizGjIyhH/7BRUyn4DUxgO
# =AeEn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Mar 2024 01:26:02 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (27 commits)
migration/multifd: Document two places for mapped-ram
tests/qtest/migration: Add a multifd + mapped-ram migration test
migration/multifd: Add mapped-ram support to fd: URI
migration/multifd: Support incoming mapped-ram stream format
migration/multifd: Support outgoing mapped-ram stream format
migration/multifd: Prepare multifd sync for mapped-ram migration
migration/multifd: Add incoming QIOChannelFile support
migration/multifd: Add outgoing QIOChannelFile support
migration/multifd: Add a wrapper for channels_created
migration/multifd: Allow receiving pages without packets
migration/multifd: Allow multifd without packets
migration/multifd: Decouple recv method from pages
migration/multifd: Rename MultiFDSend|RecvParams::data to compress_data
tests/qtest/migration: Add tests for mapped-ram file-based migration
migration/ram: Add incoming 'mapped-ram' migration
migration/ram: Add outgoing 'mapped-ram' migration
migration: Add mapped-ram URI compatibility check
migration/ram: Introduce 'mapped-ram' migration capability
migration/qemu-file: add utility methods for working with seekable channels
io: fsync before closing a file channel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# migration/ram.c
[-QemuCocoaView displayConsole:] can be called anytime so explicitly
take the BQL before it calls console_select().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-9-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The window will be resizable when zoom-to-fit is on.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-8-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
QemuCocoaView used to have fullScreenWindow but now it's gone, so we
do no longer have to call the window specifically "normalWindow".
Instead, refer to it with [-QemuCocoaView window].
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-7-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It allows making the window full screen by clicking full screen button
provided by the platform (the left-top green button) and save some code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-6-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
A subview is positioned in the superview so the superview's frame
should be used instead of one of the window to determine the
coordinates.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-5-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Core Graphics is not accelerated and slow.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-4-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ui/cocoa used to release all mouse buttons when it sees
NSEventTypeLeftMouseUp, NSEventTypeRightMouseUp, or
NSEventTypeOtherMouseUp, but it can instead release specific one
according to the delivered event.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-3-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of using mouse_event variable to tell to handle a mouse event
later, immediately call [-QemuCocoaView handleMouseEvent:buttons:].
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-ID: <20240224-cocoa-v12-2-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently [-QemuCocoaView handleEventLocked:] parses the passed event,
stores operations to be done to variables, and perform them according
to the variables. This construct will be cluttered with variables and
hard to read when we need more different operations for different
events.
Split the methods so that we can call appropriate methods depending on
events instead of relying on variables.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-1-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
macOS Sonoma changes the NSView.clipsToBounds to false by default
where it was true in earlier version of macOS. This causes the window
contents to be occluded by the frame at the top of the window. This
fixes the issue by conditionally compiling the clipping on Sonoma to
true. NSView only exposes the clipToBounds in macOS 14 and so has
to be fixed via conditional compilation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1994
Signed-off-by: David Parsons <dave@daveparsons.net>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240224140620.39200-1-dave@daveparsons.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Provides a new display option, zoom-interpolation, that enables
interpolation of the scaled display when zoom-to-fit is enabled.
Also provides a corresponding view menu item to allow this to be toggled
as required.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20231110161729.36822-2-carwynellis@gmail.com>
[PMD: QAPI @zoom-interpolation since 9.0]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The 13.2 images have been deleted from gcloud
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240304144456.3825935-3-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macOS jobs in our CI recently started failing, complaining that
the distutils module is not available anymore. And indeed, according to
https://peps.python.org/pep-0632/ it's been deprecated since a while
and now likely got removed in recent Python versions.
Fortunately, we only use it for a version check via LooseVersion here
which we don't really need anymore - according to Repology.org, these
are the versions of sphinx-rtd-theme that are currently used by the
various distros:
centos_stream_8: 0.3.1
centos_stream_9: 0.5.1
fedora_38: 1.1.1
fedora_39: 1.2.2
freebsd: 1.0.0
haikuports_master: 1.2.1
openbsd: 1.2.2
opensuse_leap_15_5: 0.5.1
pkgsrc_current: 2.0.0
debian_11: 0.5.1
debian_12: 1.2.0
ubuntu_20_04: 0.4.3
ubuntu_22_04: 1.0.0
ubuntu_24_04: 2.0.0
So except for CentOS 8, all distros are using a newer version of
sphinx-rtd-theme, and for CentOS 8 we don't support compiling with
the Sphinx of the distro anymore anyway, since it's based on the
Python 3.6 interpreter there. For compiling on CentOS 8, you have
to use the alternative Python 3.8 interpreter which comes without
Sphinx, so that needs the Sphinx installed via pip in the venv
instead, and that is using a newer version, too, according to our
pythondeps.toml file.
Thus we can simply drop the version check now to get rid of the
distutils dependency here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 20240304130403.129543-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify the exec migration code by using list utility functions.
As a side effect, this also fixes a minor memory leak. On function return,
"g_auto(GStrv) argv" frees argv and each element, which is wrong, because
the function does not own the individual elements. To compensate, the code
uses g_steal_pointer which NULLs argv and prevents the destructor from
running, but argv is leaked.
Fixes: cbab4face5 ("migration: convert exec backend ...")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20240227153321.467343-4-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid "JSON" when talking about the QAPI schema syntax. Capitalize
QEMU. Don't claim all HMP commands live in monitor/hmp-cmds.c (this
was never true). Fix punctuation and drop inappropriate "the" here
and there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227115617.237875-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The tutorial doesn't match reality since at least 2013. Repairing it
involves fixing the following issues:
* Update for commit 6d32717155 (aio / timers: Remove alarm timers):
replace the broken examples. Instead of having one for returning a
struct and another for returning a list of structs, do just one for
the latter. This resolves the FIXME added in commit
e218052f92 (aio / timers: De-document -clock) back in 2014.
* Update for commit 895a2a80e0 (qapi: Use 'struct' instead of 'type'
in schema).
* Update for commit 3313b6124b (qapi: add qapi2texi script): add
required documentation to the schema snippets, and drop section
"Command Documentation".
* Update for commit a3c45b3e62 (qapi: New special feature flag
"unstable"): supply the required feature, deemphasize the x- prefix.
* Update for commit dd98234c05 (qapi: introduce x-query-roms QMP
command): rephrase from "add new command" to "examine existing
command".
* Update for commit 9492718b7c (qapi misc: Elide redundant has_FOO in
generated C): hello-world's message argument no longer comes with a
has_message, add a second argument that does.
* Update for moved and renamed files.
While there, update QMP version output to current output.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227115617.237875-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Whitespace tidied up, typo fixed]
Documentation claims the command can "return NULL". "NULL" doesn't
exist in JSON. "null" does, but the command returns lists, and null
isn't. Correct documentation to "return an empty list".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-13-armbru@redhat.com>
"Returns:" sections of guest-fsfreeze-freeze and
guest-fsfreeze-freeze-list describe both command behavior and success
response. Move behavior out, so "Returns:" is only about success
response.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-12-armbru@redhat.com>
Drop "on success" where it is redundant with "Returns:".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-11-armbru@redhat.com>
Phrase it like "If <condition>, <error>", like we do elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-8-armbru@redhat.com>
Drop list markup, since there's just one item left.
Drop "on success" where it is redundant with "Returns:".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-7-armbru@redhat.com>
We use section "Returns" for documenting both success and error
response of commands.
I intend to generate better command success response documentation.
Easier when "Returns" documents just he success response.
Create new section tag "Errors". The next two commits will move error
response documentation from "Returns" sections to "Errors" sections.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-4-armbru@redhat.com>
Change "'Returns:' is only valid for commands" to "'Returns' section
is only valid for commands".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-3-armbru@redhat.com>
This is chiefly to make code that looks up these sections easier to
read.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-2-armbru@redhat.com>
Add two documentations for mapped-ram migration on two spots that may not
be extremely clear.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240301091524.39900-1-peterx@redhat.com
Cc: Prasad Pandit <ppandit@redhat.com>
[peterx: fix two English errors per Prasad]
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the missing 64-bit hppa firmware blob so that it gets installed.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 7c0dfcf939 ("target/hppa: Update SeaBIOS-hppa to version 16")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When calculating the IOR for the exception handlers, the current
unwind_breg value is needed on 64-bit hppa machines.
Restore that value by calling cpu_restore_state() earlier, which in turn
calls hppa_restore_state_to_opc() which restores the unwind_breg for the
current instruction.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3824e0d643 ("target/hppa: Export function hppa_set_ior_and_isr()")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
