hw/i2c: Implement Broadcom Serial Controller (BSC)

A few deficiencies in the current device model need to be noted.

1. FIFOs are not used. All sends and receives are done directly.
2. Repeated starts are not emulated. Repeated starts can be triggered in real
hardware by sending a new read transfer request in the window time between
transfer active set of write transfer request and done bit set of the same.

Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240224191038.2409945-2-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is contained in:
Rayhan Faizel 2024-02-25 00:40:36 +05:30 committed by Peter Maydell
parent 4eac9dfbd7
commit 9cf3bc65af
5 changed files with 368 additions and 0 deletions

View File

@ -35,6 +35,7 @@ Implemented devices
* MailBox controller (MBOX)
* VideoCore firmware (property)
* Peripheral SPI controller (SPI)
* Broadcom Serial Controller (I2C)
Missing devices
---------------

View File

@ -45,3 +45,7 @@ config PCA954X
config PMBUS
bool
select SMBUS
config BCM2835_I2C
bool
select I2C

282
hw/i2c/bcm2835_i2c.c Normal file
View File

@ -0,0 +1,282 @@
/*
* Broadcom Serial Controller (BSC)
*
* Copyright (c) 2024 Rayhan Faizel <rayhan.faizel@gmail.com>
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "hw/i2c/bcm2835_i2c.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
static void bcm2835_i2c_update_interrupt(BCM2835I2CState *s)
{
int do_interrupt = 0;
/* Interrupt on RXR (Needs reading) */
if (s->c & BCM2835_I2C_C_INTR && s->s & BCM2835_I2C_S_RXR) {
do_interrupt = 1;
}
/* Interrupt on TXW (Needs writing) */
if (s->c & BCM2835_I2C_C_INTT && s->s & BCM2835_I2C_S_TXW) {
do_interrupt = 1;
}
/* Interrupt on DONE (Transfer complete) */
if (s->c & BCM2835_I2C_C_INTD && s->s & BCM2835_I2C_S_DONE) {
do_interrupt = 1;
}
qemu_set_irq(s->irq, do_interrupt);
}
static void bcm2835_i2c_begin_transfer(BCM2835I2CState *s)
{
int direction = s->c & BCM2835_I2C_C_READ;
if (i2c_start_transfer(s->bus, s->a, direction)) {
s->s |= BCM2835_I2C_S_ERR;
}
s->s |= BCM2835_I2C_S_TA;
if (direction) {
s->s |= BCM2835_I2C_S_RXR | BCM2835_I2C_S_RXD;
} else {
s->s |= BCM2835_I2C_S_TXW;
}
}
static void bcm2835_i2c_finish_transfer(BCM2835I2CState *s)
{
/*
* STOP is sent when DLEN counts down to zero.
*
* https://github.com/torvalds/linux/blob/v6.7/drivers/i2c/busses/i2c-bcm2835.c#L223-L261
* It is possible to initiate repeated starts on real hardware.
* However, this requires sending another ST request before the bytes in
* TX FIFO are shifted out.
*
* This is not emulated currently.
*/
i2c_end_transfer(s->bus);
s->s |= BCM2835_I2C_S_DONE;
/* Ensure RXD is cleared, otherwise the driver registers an error */
s->s &= ~(BCM2835_I2C_S_TA | BCM2835_I2C_S_RXR |
BCM2835_I2C_S_TXW | BCM2835_I2C_S_RXD);
}
static uint64_t bcm2835_i2c_read(void *opaque, hwaddr addr, unsigned size)
{
BCM2835I2CState *s = opaque;
uint32_t readval = 0;
switch (addr) {
case BCM2835_I2C_C:
readval = s->c;
break;
case BCM2835_I2C_S:
readval = s->s;
break;
case BCM2835_I2C_DLEN:
readval = s->dlen;
break;
case BCM2835_I2C_A:
readval = s->a;
break;
case BCM2835_I2C_FIFO:
/* We receive I2C messages directly instead of using FIFOs */
if (s->s & BCM2835_I2C_S_TA) {
readval = i2c_recv(s->bus);
s->dlen -= 1;
if (s->dlen == 0) {
bcm2835_i2c_finish_transfer(s);
}
}
bcm2835_i2c_update_interrupt(s);
break;
case BCM2835_I2C_DIV:
readval = s->div;
break;
case BCM2835_I2C_DEL:
readval = s->del;
break;
case BCM2835_I2C_CLKT:
readval = s->clkt;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
}
return readval;
}
static void bcm2835_i2c_write(void *opaque, hwaddr addr,
uint64_t value, unsigned int size)
{
BCM2835I2CState *s = opaque;
uint32_t writeval = value;
switch (addr) {
case BCM2835_I2C_C:
/* ST is a one-shot operation; it must read back as 0 */
s->c = writeval & ~BCM2835_I2C_C_ST;
/* Start transfer */
if (writeval & (BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN)) {
bcm2835_i2c_begin_transfer(s);
/*
* Handle special case where transfer starts with zero data length.
* Required for zero length i2c quick messages to work.
*/
if (s->dlen == 0) {
bcm2835_i2c_finish_transfer(s);
}
}
bcm2835_i2c_update_interrupt(s);
break;
case BCM2835_I2C_S:
if (writeval & BCM2835_I2C_S_DONE && s->s & BCM2835_I2C_S_DONE) {
/* When DONE is cleared, DLEN should read last written value. */
s->dlen = s->last_dlen;
}
/* Clear DONE, CLKT and ERR by writing 1 */
s->s &= ~(writeval & (BCM2835_I2C_S_DONE |
BCM2835_I2C_S_ERR | BCM2835_I2C_S_CLKT));
break;
case BCM2835_I2C_DLEN:
s->dlen = writeval;
s->last_dlen = writeval;
break;
case BCM2835_I2C_A:
s->a = writeval;
break;
case BCM2835_I2C_FIFO:
/* We send I2C messages directly instead of using FIFOs */
if (s->s & BCM2835_I2C_S_TA) {
if (s->s & BCM2835_I2C_S_TXD) {
if (!i2c_send(s->bus, writeval & 0xff)) {
s->dlen -= 1;
} else {
s->s |= BCM2835_I2C_S_ERR;
}
}
if (s->dlen == 0) {
bcm2835_i2c_finish_transfer(s);
}
}
bcm2835_i2c_update_interrupt(s);
break;
case BCM2835_I2C_DIV:
s->div = writeval;
break;
case BCM2835_I2C_DEL:
s->del = writeval;
break;
case BCM2835_I2C_CLKT:
s->clkt = writeval;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
}
}
static const MemoryRegionOps bcm2835_i2c_ops = {
.read = bcm2835_i2c_read,
.write = bcm2835_i2c_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static void bcm2835_i2c_realize(DeviceState *dev, Error **errp)
{
BCM2835I2CState *s = BCM2835_I2C(dev);
s->bus = i2c_init_bus(dev, NULL);
memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_i2c_ops, s,
TYPE_BCM2835_I2C, 0x24);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
}
static void bcm2835_i2c_reset(DeviceState *dev)
{
BCM2835I2CState *s = BCM2835_I2C(dev);
/* Reset values according to BCM2835 Peripheral Documentation */
s->c = 0x0;
s->s = BCM2835_I2C_S_TXD | BCM2835_I2C_S_TXE;
s->dlen = 0x0;
s->a = 0x0;
s->div = 0x5dc;
s->del = 0x00300030;
s->clkt = 0x40;
}
static const VMStateDescription vmstate_bcm2835_i2c = {
.name = TYPE_BCM2835_I2C,
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]) {
VMSTATE_UINT32(c, BCM2835I2CState),
VMSTATE_UINT32(s, BCM2835I2CState),
VMSTATE_UINT32(dlen, BCM2835I2CState),
VMSTATE_UINT32(a, BCM2835I2CState),
VMSTATE_UINT32(div, BCM2835I2CState),
VMSTATE_UINT32(del, BCM2835I2CState),
VMSTATE_UINT32(clkt, BCM2835I2CState),
VMSTATE_UINT32(last_dlen, BCM2835I2CState),
VMSTATE_END_OF_LIST()
}
};
static void bcm2835_i2c_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = bcm2835_i2c_reset;
dc->realize = bcm2835_i2c_realize;
dc->vmsd = &vmstate_bcm2835_i2c;
}
static const TypeInfo bcm2835_i2c_info = {
.name = TYPE_BCM2835_I2C,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(BCM2835I2CState),
.class_init = bcm2835_i2c_class_init,
};
static void bcm2835_i2c_register_types(void)
{
type_register_static(&bcm2835_i2c_info);
}
type_init(bcm2835_i2c_register_types)

View File

@ -17,4 +17,5 @@ i2c_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_i2c.c'))
i2c_ss.add(when: 'CONFIG_PPC4XX', if_true: files('ppc4xx_i2c.c'))
i2c_ss.add(when: 'CONFIG_PCA954X', if_true: files('i2c_mux_pca954x.c'))
i2c_ss.add(when: 'CONFIG_PMBUS', if_true: files('pmbus_device.c'))
i2c_ss.add(when: 'CONFIG_BCM2835_I2C', if_true: files('bcm2835_i2c.c'))
system_ss.add_all(when: 'CONFIG_I2C', if_true: i2c_ss)

View File

@ -0,0 +1,80 @@
/*
* Broadcom Serial Controller (BSC)
*
* Copyright (c) 2024 Rayhan Faizel <rayhan.faizel@gmail.com>
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw/sysbus.h"
#include "hw/i2c/i2c.h"
#include "qom/object.h"
#define TYPE_BCM2835_I2C "bcm2835-i2c"
OBJECT_DECLARE_SIMPLE_TYPE(BCM2835I2CState, BCM2835_I2C)
#define BCM2835_I2C_C 0x0 /* Control */
#define BCM2835_I2C_S 0x4 /* Status */
#define BCM2835_I2C_DLEN 0x8 /* Data Length */
#define BCM2835_I2C_A 0xc /* Slave Address */
#define BCM2835_I2C_FIFO 0x10 /* FIFO */
#define BCM2835_I2C_DIV 0x14 /* Clock Divider */
#define BCM2835_I2C_DEL 0x18 /* Data Delay */
#define BCM2835_I2C_CLKT 0x20 /* Clock Stretch Timeout */
#define BCM2835_I2C_C_I2CEN BIT(15) /* I2C enable */
#define BCM2835_I2C_C_INTR BIT(10) /* Interrupt on RXR */
#define BCM2835_I2C_C_INTT BIT(9) /* Interrupt on TXW */
#define BCM2835_I2C_C_INTD BIT(8) /* Interrupt on DONE */
#define BCM2835_I2C_C_ST BIT(7) /* Start transfer */
#define BCM2835_I2C_C_CLEAR (BIT(5) | BIT(4)) /* Clear FIFO */
#define BCM2835_I2C_C_READ BIT(0) /* I2C read mode */
#define BCM2835_I2C_S_CLKT BIT(9) /* Clock stretch timeout */
#define BCM2835_I2C_S_ERR BIT(8) /* Slave error */
#define BCM2835_I2C_S_RXF BIT(7) /* RX FIFO full */
#define BCM2835_I2C_S_TXE BIT(6) /* TX FIFO empty */
#define BCM2835_I2C_S_RXD BIT(5) /* RX bytes available */
#define BCM2835_I2C_S_TXD BIT(4) /* TX space available */
#define BCM2835_I2C_S_RXR BIT(3) /* RX FIFO needs reading */
#define BCM2835_I2C_S_TXW BIT(2) /* TX FIFO needs writing */
#define BCM2835_I2C_S_DONE BIT(1) /* I2C Transfer complete */
#define BCM2835_I2C_S_TA BIT(0) /* I2C Transfer active */
struct BCM2835I2CState {
/* <private> */
SysBusDevice parent_obj;
/* <public> */
MemoryRegion iomem;
I2CBus *bus;
qemu_irq irq;
uint32_t c;
uint32_t s;
uint32_t dlen;
uint32_t a;
uint32_t div;
uint32_t del;
uint32_t clkt;
uint32_t last_dlen;
};