Remove the following macros (remnants of the old generator design)
READ_REG
READ_PREG
WRITE_RREG
WRITE_PREG
Modify macros that rely on the above
The following are unused
READ_IREG
fGET_FIELD
fSET_FIELD
fREAD_P3
fREAD_NPC
fWRITE_LC0
fWRITE_LC1
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405183048.147767-1-tsimpson@quicinc.com>
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-3-quic_mliebel@quicinc.com>
Replace python 2 format string with f-strings
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-2-quic_mliebel@quicinc.com>
When there is a conditional change of flow or an endloop instruction, we
preload HEX_REG_PC with ctx->next_PC at gen_start_packet(). Nonetheless,
we still generate TCG code to do this update again at gen_goto_tb() when
the condition for the COF is not met, thus producing redundant
instructions. This can be seen with the following packet:
0x004002e4: 0x5c20d000 { if (!P0) jump:t PC+0 }
Which generates this TCG code:
---- 004002e4
-> mov_i32 pc,$0x4002e8
and_i32 loc9,p0,$0x1
mov_i32 branch_taken,loc9
add_i32 pkt_cnt,pkt_cnt,$0x2
add_i32 insn_cnt,insn_cnt,$0x2
brcond_i32 branch_taken,$0x0,ne,$L1
goto_tb $0x0
mov_i32 pc,$0x4002e4
exit_tb $0x7fb0c36e5200
set_label $L1
goto_tb $0x1
-> mov_i32 pc,$0x4002e8
exit_tb $0x7fb0c36e5201
set_label $L0
exit_tb $0x7fb0c36e5203
Note that even after optimizations, the redundant PC update is still
present:
---- 004002e4
-> mov_i32 pc,$0x4002e8 sync: 0 dead: 0 1 pref=0xffff
mov_i32 branch_taken,$0x1 sync: 0 dead: 0 1 pref=0xffff
add_i32 pkt_cnt,pkt_cnt,$0x2 sync: 0 dead: 0 1 pref=0xffff
add_i32 insn_cnt,insn_cnt,$0x2 sync: 0 dead: 0 1 2 pref=0xffff
goto_tb $0x1
-> mov_i32 pc,$0x4002e8 sync: 0 dead: 0 1 pref=0xffff
exit_tb $0x7fb0c36e5201
set_label $L0
exit_tb $0x7fb0c36e5203
With this patch, the second redundant update is properly discarded.
Note that we need the additional "move_to_pc" flag instead of just
avoiding the update whenever `dest == ctx->next_PC`, as that could
potentially skip updates from a COF with met condition, whose
ctx->branch_dest just happens to be equal to ctx->next_PC.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <fc059153c3f0526d97b7f13450c02b276b0908e1.1679519341.git.quic_mathbern@quicinc.com>
- update Alpine image used for testing images
- include libslirp in custom runner build env
- update gitlab-runner recipe for CentOS
- update docker calls for better caching behaviour
- document some plugin callbacks
- don't use tags to define drives for lkft baseline tests
- fix missing clear of plugin_mem_cbs
- fix iotests to report individual results
- update the gitdm metadata for contributors
- avoid printing comments before g_test_init()
- probe for multiprocess support before running avocado test
- refactor igb.py into netdev-ethtool.py avocado test
- rebuild openbsd to have more space space for iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQbGkoACgkQ+9DbCVqe
KkT2kQgAif70dGyn2bcv7OYv2LgAcSzDGTIsOfMM6gYc9bm3nU/R/cj9cy8Qgbnu
v6BSVeig5AVBWI1UTuMNeKW1BWoQYfxg2kdduSyAzMZS44r09ch9iabSbxbadC1e
L1RrRWlzs/MwWX8IclAyEj1jr+DB+/DwoG61IP3215XXSy84e/XV4j+JAyBEzXQ9
LdznGyqyItg3S6rnVpRP/wjR0P3VlrYOLOjFfCw7gB8JrlW7KIr8hWkHXYuS2mF5
UyXTBwbXwYB5BAx0zXC3SVgl0Gs1qymaRUX77dlotlpVVo0Ql8a06dHPtYrjMNgA
/Nyat3Dbbu7Rai+IzZIJl3tGx850wg==
=XR0M
-----END PGP SIGNATURE-----
Merge tag 'pull-for-8.0-220323-1' of https://gitlab.com/stsquad/qemu into staging
Misc fixes for 8.0 (testing, plugins, gitdm)
- update Alpine image used for testing images
- include libslirp in custom runner build env
- update gitlab-runner recipe for CentOS
- update docker calls for better caching behaviour
- document some plugin callbacks
- don't use tags to define drives for lkft baseline tests
- fix missing clear of plugin_mem_cbs
- fix iotests to report individual results
- update the gitdm metadata for contributors
- avoid printing comments before g_test_init()
- probe for multiprocess support before running avocado test
- refactor igb.py into netdev-ethtool.py avocado test
- rebuild openbsd to have more space space for iotests
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQbGkoACgkQ+9DbCVqe
# KkT2kQgAif70dGyn2bcv7OYv2LgAcSzDGTIsOfMM6gYc9bm3nU/R/cj9cy8Qgbnu
# v6BSVeig5AVBWI1UTuMNeKW1BWoQYfxg2kdduSyAzMZS44r09ch9iabSbxbadC1e
# L1RrRWlzs/MwWX8IclAyEj1jr+DB+/DwoG61IP3215XXSy84e/XV4j+JAyBEzXQ9
# LdznGyqyItg3S6rnVpRP/wjR0P3VlrYOLOjFfCw7gB8JrlW7KIr8hWkHXYuS2mF5
# UyXTBwbXwYB5BAx0zXC3SVgl0Gs1qymaRUX77dlotlpVVo0Ql8a06dHPtYrjMNgA
# /Nyat3Dbbu7Rai+IzZIJl3tGx850wg==
# =XR0M
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Mar 2023 15:10:02 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-for-8.0-220323-1' of https://gitlab.com/stsquad/qemu: (35 commits)
qtests: avoid printing comments before g_test_init()
contrib/gitdm: add group map for AMD
contrib/gitdm: add more individual contributors
contrib/gitdm: add revng to domain map
contrib/gitdm: add Alibaba to the domain-map
contrib/gitdm: add Amazon to the domain map
contrib/gitdm: Add SYRMIA to the domain map
contrib/gitdm: Add ASPEED Technology to the domain map
iotests: remove the check-block.sh script
iotests: register each I/O test separately with meson
iotests: always use a unique sub-directory per test
iotests: connect stdin to /dev/null when running tests
iotests: print TAP protocol version when reporting tests
iotests: strip subdir path when listing tests
iotests: allow test discovery before building
iotests: explicitly pass source/build dir to 'check' command
tests/vm: custom openbsd partitioning to increase /home space
tests/vm: skip X11 in openbsd installation
include/qemu/plugin: Inline qemu_plugin_disable_mem_helpers
include/qemu: Split out plugin-event.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:
# Skipping test: Userfault not available (builtdtime)
TAP version 13
# random seed: R02Sc120c807f11053eb90bfea845ba1e368
1..32
# Start of x86_64 tests
# Start of migration tests
....
The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
AMD recently acquired Xilinx and contributors have been transitioning
their emails across.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vikram Garhwal <vikram.garhwal@amd.com>
Cc: Stefano Stabellini <stefano.stabellini@amd.com>
Cc: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Cc: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-Id: <20230315174331.2959-33-alex.bennee@linaro.org>
I've only added the names explicitly acked.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Acked-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-32-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anton Johansson <anjo@rev.ng>
Cc: Niccolò Izzo <nizzo@rev.ng>
Cc: Paolo Montesel <babush@rev.ng>
Reviewed-by: Alessandro Di Federico <ale@rev.ng>
Message-Id: <20230315174331.2959-31-alex.bennee@linaro.org>
This replaces the previous attempt to add c-sky.com. Group everything
under Alibaba now.
Added as requested by LIU Zhiwei.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230315174331.2959-30-alex.bennee@linaro.org>
We have multiple contributors from both .co.uk and .com versions of
the address. Also add .de for completeness sake.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Wooodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230315174331.2959-29-alex.bennee@linaro.org>
The company website lists QEMU amongst the things they work on so I
assume these are corporate contributions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230315174331.2959-28-alex.bennee@linaro.org>
We have a number of contributors from this domain which is a corporate
endeavour.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Steven Lee <steven_lee@aspeedtech.com>
Cc: Troy Lee <troy_lee@aspeedtech.com>
Cc: Howard Chiu <howard_chiu@aspeedtech.com>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Troy Lee <troy_lee@aspeedtech.com>
Message-Id: <20230315174331.2959-27-alex.bennee@linaro.org>
Now that meson directly invokes the individual I/O tests, the
check-block.sh wrapper script is no longer required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-9-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-26-alex.bennee@linaro.org>
Currently meson registers a single test that invokes an entire group of
I/O tests, hiding the test granularity from meson. There are various
downsides of doing this
* You cannot ask 'meson test' to invoke a single I/O test
* The meson test timeout can't be applied to the individual
tests
* Meson only gets a pass/fail for the overall I/O test group
not individual tests
* If a CI job gets killed by the GitLab timeout, we don't
get visibility into how far through the I/O tests
execution got.
This switches meson to perform test discovery by invoking 'check' in
dry-run mode. It then registers one meson test case for each I/O
test. Parallel execution remains disabled since the I/O tests do not
use self contained execution environments and thus conflict with
each other.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-8-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-25-alex.bennee@linaro.org>
The current test runner is only safe against parallel execution within
a single instance of the 'check' process, and only if -j is given a
value greater than 2. This prevents running multiple copies of the
'check' process for different test scenarios.
This change switches the output / socket directories to always include
the test name, image format and image protocol. This should allow full
parallelism of all distinct test scenarios. eg running both qcow2 and
raw tests at the same time, or both file and nbd tests at the same
time.
It would be possible to allow for parallelism of the same test scenario
by including the pid, but that would potentially let many directories
accumulate over time on failures, so is not done.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-7-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-24-alex.bennee@linaro.org>
Currently the tests have their stdin inherited from the test harness,
meaning they are connected to a TTY. The QEMU processes spawned by
certain tests, however, modify TTY settings and if the test exits
abnormally the settings might not be restored.
The python test harness thus has some logic which will capture the
initial TTY settings and restore them once all tests are finished.
This does not, however, take into account the possibility of many
copies of the 'check' program running in parallel. With parallel
execution, a later invokation may save the TTY state that QEMU has
already modified, and thus restore bad state leaving the TTY
non-functional.
None of the I/O tests shnould actually be interactive requiring
user input and so they should not require a TTY at all. To avoid
this while TTY save/restore complexity we can connect the test
stdin to /dev/null instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-6-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-23-alex.bennee@linaro.org>
Recently meson started complaining that TAP test reports don't include
the TAP protocol version. While this warning is bogus and has since been
removed from Meson, it looks like good practice to include this header
going forward. The GLib library test harness has started unconditionally
printing the version, so this brings the I/O tests into line.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-5-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-22-alex.bennee@linaro.org>
When asking 'check' to list individual tests by invoking it in dry run
mode, it prints the paths to the tests relative to the base of the
I/O test directory.
When asking 'check' to run an individual test, however, it mandates that
only the unqualified test name is given, without any path prefix. This
inconsistency makes it harder to ask for a list of tests and then invoke
each one.
Thus the test listing code is change to flatten the test names, by
printing only the base name, which can be directly invoked.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-4-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-21-alex.bennee@linaro.org>
The 'check' script can be invoked in "dry run" mode, in which case it
merely does test discovery and prints out all their names. Despite only
doing test discovery it still validates that the various QEMU binaries
can be found. This makes it impossible todo test discovery prior to
building QEMU. This is a desirable feature to support, because it will
let meson discover tests.
Fortunately the code in the TestEnv constructor is ordered in a way
that makes this fairly trivial to achieve. We can just short circuit
the constructor after the basic directory paths have been set.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-20-alex.bennee@linaro.org>
The 'check' script has some rather dubious logic whereby it assumes
that if invoked as a symlink, then it is running from a separate
source tree and build tree, otherwise it assumes the current working
directory is a combined source and build tree.
This doesn't work if you want to invoke the 'check' script using
its full source tree path while still using a split source and build
tree layout. This would be a typical situation with meson if you ask
it to find the 'check' script path using files('check').
Rather than trying to make the logic more magical, add support for
explicitly passing the dirs using --source-dir and --build-dir. If
either is omitted the current logic is maintained.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-19-alex.bennee@linaro.org>
The openbsd image is 20GB in size, but the automatic partitioning
done by the installer leaves /home with a mere ~3.5 GB of space,
wasting free space across many other partitions that are not
used by our build process:
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 1229692 213592 954616 18% /
/dev/sd0k 7672220 40 7288572 0% /home
/dev/sd0d 1736604 24 1649752 0% /tmp
/dev/sd0f 4847676 2505124 2100172 54% /usr
/dev/sd0g 1326684 555656 704696 44% /usr/X11R6
/dev/sd0h 4845436 1445932 3157236 31% /usr/local
/dev/sd0j 10898972 4 10354020 0% /usr/obj
/dev/sd0i 3343644 4 3176460 0% /usr/src
/dev/sd0e 2601212 19840 2451312 1% /var
This change tells the installer todo custom partitioning with
4 GB on /, 256 MB swap, and the remaining ~15GB for /home
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 7932412 4740204 2795588 63% /
/dev/sd0d 32164636 40 30556368 0% /home
This will avoid ENOSPC failures when tests that need to create
big files (disk images) run in parallel.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As a VM used only for automated testing there is no need to
install the X11 stack.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Now that we've broken the include loop with cpu.h,
we can bring this inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-8-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-18-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
The usage in hw/core/cpu.h only requires QEMU_PLUGIN_EV_MAX.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-7-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-17-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-6-richard.henderson@linaro.org>
[AJB: also syscall-trace.h]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-16-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This macro is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-4-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-14-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Now that we call qemu_plugin_disable_mem_helpers in cpu_tb_exec,
we don't need to do this in generated code as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-13-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Do this in cpu_tb_exec (normal exit) and cpu_loop_exit (exception),
adjacent to where we reset can_do_io.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-12-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
We are abusing the avocado tags which are intended to provide test
selection metadata to provide parameters to our test. This works OK up
until the point you need to have ,'s in the field as this is the tag
separator character which is the case for a number of the drive
parameters. Fix this by making drive a parameter to the common helper
function.
Fixes: 267fe57c23 (tests: add tuxrun baseline test to avocado)
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-11-alex.bennee@linaro.org>
So you can do:
cd tests/tcg/aarch64-linux-user
make -f ../Makefile.target help
To see the list of tests. You can then run each one individually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-8-alex.bennee@linaro.org>
Some API documentation was missed, rectify that.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1497
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-7-alex.bennee@linaro.org>
A couple of clean-ups here:
- inherit from the custom runners job for artefacts
- call check-avocado directly
- add some comments to the top about setup
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-6-alex.bennee@linaro.org>
This was broken when we moved to using the pre-built packages as we
didn't take care to ensure we used RPMs where required.
NB: I could never get this to complete on my test setup but I suspect
this was down to network connectivity and timeouts while downloading.
Fixes: 69c4befba1 (scripts/ci: update gitlab-runner playbook to use latest runner)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-5-alex.bennee@linaro.org>
Without libslip enabled we won't have user networking which means the
KVM tests won't run.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-4-alex.bennee@linaro.org>
It seems we also need to pass DOCKER_BUILDKIT as an argument to docker
itself to get the full benefit of caching.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-3-alex.bennee@linaro.org>
The core of the test was utilising "ethtool -t eth1 offline" to run
through a test sequence. For reasons unknown the test hangs under some
configurations of the build on centos8-stream. Fundamentally running
the old fedora-31 cloud-init is just too much for something that is
directed at testing one device. So we:
- replace fedora with a custom kernel + buildroot rootfs
- rename the test from IGB to NetDevEthtool
- re-factor the common code, add (currently skipped) tests for other
devices which support ethtool
- remove the KVM limitation as its fast enough to run in KVM or TCG
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230322145529.4079753-1-alex.bennee@linaro.org>
A recent attempt to let avocado run more tests on the CentOS stream
build failed because there was no gating on the multiprocess feature.
Like missing accelerators avocado should gracefully skip when the
feature is not enabled.
In this case we use the existence of the proxy device as a proxy for
multi-process support.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Message-Id: <20230321111752.2681128-1-alex.bennee@linaro.org>
To test Alpine boot on SBSA-Ref target we need Alpine Linux
'standard' image as 'virt' one lacks kernel modules.
So to minimalize Avocado cache I move test to 'standard' image.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302191146.1790560-1-marcin.juszkiewicz@linaro.org>
Message-Id: <20230315174331.2959-2-alex.bennee@linaro.org>
Unfortunately a bug in older versions of gdb means that they will
crash if QEMU sends them the aarch64-pauth.xml. This bug is fixed in
gdb commit 1ba3a3222039eb25, and there are plans to backport that to
affected gdb release branches, but since the bug affects gdb 9
through 12 it is very widely deployed (for instance by distros).
It is not currently clear what the best way to deal with this is; it
has been proposed to define a new XML feature name that old gdb will
ignore but newer gdb can handle. Since QEMU's 8.0 release is
imminent and at least one of our CI runners is now falling over this,
disable the pauth XML for the moment. We can follow up with a more
considered fix either in time for 8.0 or else for the 8.1 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The markup for the Arm CPU feature documentation is incorrect,
and results in the HTML not rendering correctly -- the first
line of each description is rendered in boldface as if it
were part of the option name.
Reformat to match the styling used in cpu-models-x86.rst.inc.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1479
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230316105808.1414003-1-peter.maydell@linaro.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The i.MX USB Phy driver does not check register ranges, resulting in out of
bounds accesses if an attempt is made to access non-existing PHY registers.
Add range check and conditionally report bad accesses to fix the problem.
While at it, also conditionally log attempted writes to non-existing or
read-only registers.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-id: 20230316234926.208874-1-linux@roeck-us.net
Link: https://gitlab.com/qemu-project/qemu/-/issues/1408
Fixes: 0701a5efa0 ("hw/usb: Add basic i.MX USB Phy support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since its inception elf2dmp has checked MZ signatures within an
address space above IDT[0] interrupt vector and took first PE image
found as Windows Kernel.
But in Windows Server 2022 memory dump this address space range is
full of invalid PE fragments and the tool must check that PE image
is 'ntoskrnl.exe' actually.
So, introduce additional validation by checking image name from
Export Directory against 'ntoskrnl.exe'.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Tested-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-4-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move out PE directory search functionality to be reused not only
for Debug Directory processing but for arbitrary PE directory.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-3-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Originally elf2dmp were added with some code style issues,
especially in pe.h header, and some were introduced by
2d0fc797fa. Fix them now.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-2-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cadence UART attempts to avoid allowing the guest to set invalid
baud rate register values in the uart_write() function. However it
does the "mask to the size of the register field" and "check for
invalid values" in the wrong order, which means that a malicious
guest can get a bogus value into the register by setting also some
high bits in the value, and cause QEMU to crash by division-by-zero.
Do the mask before the bounds check instead of afterwards.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1493
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-id: 20230314170804.1196232-1-peter.maydell@linaro.org
Add implementation defined registers for neoverse-n1 which
would be accessed by TF-A. Since there is no DSU in Qemu,
CPUCFR_EL1.SCU bit is set to 1 to avoid DSU registers definition.
Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230313033936.585669-1-chenbaozi@phytium.com.cn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
