The PowerISA reference states that the comparison operators update the
FPCC, CR and FPSCR and, if VE=1, jump to the exception handler.
Moving the exception-triggering code after the CC update sequence solves
the problem.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201112230130.65262-5-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since we always perform a comparison between the two operands avoid
checking for NaN unless the result states they're unordered.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201112230130.65262-4-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201112230130.65262-3-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the PowerISA v3.1 reference, Table 68 "Actions for xscmpudp
- Part 1: Compare Unordered", whenever one of the two operands is a NaN
the SO bit is set while the other three bits are cleared.
Apply the same change to xscmpuqp.
The respective ordered counterparts are unaffected.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <20201112230130.65262-2-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
target/ppc/mmu_helper.c: In function ‘dump_mmu’:
target/ppc/mmu_helper.c:1351:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
1351 | if (ppc64_v3_radix(env_archcpu(env))) {
| ^
target/ppc/mmu_helper.c:1358:5: note: here
1358 | default:
| ^~~~~~~
Use "qemu_log_mask(LOG_UNIMP**)" instead of the TODO comment.
And add the break statement to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20201116024810.2415819-8-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
I found that there are many spelling errors in the comments of qemu/target/m68k.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Reviewed-by: Laurent Vivier<laurent@vivier.eu>
Message-Id: <20201009064449.2336-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
They are unused since the target has been converted to TCG.
Fixes: e1f3808e03 ("Convert m68k target to TCG.")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201022203000.1922749-2-laurent@vivier.eu>
When running device-introspect-test, a memory leak occurred in the s390_cpu_initfn
function, this patch use timer_free() in the finalize function to fix it.
ASAN shows memory leak stack:
Direct leak of 3552 byte(s) in 74 object(s) allocated from:
#0 0xfffeb3d4e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
#1 0xfffeb36e6800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
#2 0xaaad51a8f9c4 in timer_new_full qemu/include/qemu/timer.h:523
#3 0xaaad51a8f9c4 in timer_new qemu/include/qemu/timer.h:544
#4 0xaaad51a8f9c4 in timer_new_ns qemu/include/qemu/timer.h:562
#5 0xaaad51a8f9c4 in s390_cpu_initfn qemu/target/s390x/cpu.c:304
#6 0xaaad51e00f58 in object_init_with_type qemu/qom/object.c:371
#7 0xaaad51e0406c in object_initialize_with_type qemu/qom/object.c:515
#8 0xaaad51e042e0 in object_new_with_type qemu/qom/object.c:729
#9 0xaaad51e3ff40 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153
#10 0xaaad51910518 in qdev_device_help qemu/softmmu/qdev-monitor.c:283
#11 0xaaad51911918 in qmp_device_add qemu/softmmu/qdev-monitor.c:801
#12 0xaaad51911e48 in hmp_device_add qemu/softmmu/qdev-monitor.c:916
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201204081209.360524-4-ganqixin@huawei.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The current implementation will disable the guest Intel PT feature
if the Intel PT LIP feature is supported on the host, but the LIP
feature is comming soon(e.g. SnowRidge and later).
This patch will make the guest LIP feature configurable and Intel
PT feature can be enabled in guest when the guest LIP status same
with the host.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <20201202101042.11967-1-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the machine properties instead.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per the SDM, when returning to outer privilege level, for segment
registers (ES, FS, GS, and DS) if the check fails, the segment
selector becomes null, but QEMU clears the base/limit/flags as well
as nullifying the segment selector, which should be a spec violation.
Real hardware seems to be compliant with the spec, at least on one
Coffee Lake board I tested.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <1605261378-77971-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IOAPIC has an 'Extended Destination ID' field in its RTE, which maps
to bits 11-4 of the MSI address. Since those address bits fall within a
given 4KiB page they were historically non-trivial to use on real hardware.
The Intel IOMMU uses the lowest bit to indicate a remappable format MSI,
and then the remaining 7 bits are part of the index.
Where the remappable format bit isn't set, we can actually use the other
seven to allow external (IOAPIC and MSI) interrupts to reach up to 32768
CPUs instead of just the 255 permitted on bare metal.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <78097f9218300e63e751e077a0a5ca029b56ba46.camel@infradead.org>
[Fix UBSAN warning. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
For PDEP and PEXT, the mask is provided in the memory (mod+r/m)
operand, and therefore is loaded in s->T0 by gen_ldst_modrm.
The source is provided in the second source operand (VEX.vvvv)
and therefore is loaded in s->T1. Fix the order in which
they are passed to the helpers.
Reported-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Analyzed-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1605123
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
* an ESB instruction which is a NOP
-- since it is in the HINT space we need only add a comment
* an RFSR register which will RAZ/WI
* a RAZ/WI AIRCR.IESB bit
-- the code which handles writes to AIRCR does not allow setting
of RES0 bits, so we already treat this as RAZ/WI; add a comment
noting that this is deliberate
* minimal implementation of the RAS register block at 0xe0005000
-- this will be in a subsequent commit
* setting the ID_PFR0.RAS field to 0b0010
-- we will do this when we add the Cortex-M55 CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
Add the code in the SG insn implementation for the new behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-24-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set).
The only difference is that:
* the old T1 encodings UNDEF if the implementation implements 32
Dregs (this is currently architecturally impossible for M-profile)
* the new T2 encodings have the implementation-defined option to
read from memory (discarding the data) or write UNKNOWN values to
memory for the stack slots that would be D16-D31
We choose not to make those accesses, so for us the two
instructions behave identically assuming they don't UNDEF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-21-peter.maydell@linaro.org
In v8.1M a new exception return check is added which may cause a NOCP
UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR
we must check whether access to CP10 from the Security state of the
returning exception is disabled; if it is then we must take a fault.
(Note that for our implementation CPPWR is always RAZ/WI and so can
never cause CP10 accesses to fail.)
The other v8.1M change to this register-clearing code is that if MVE
is implemented VPR must also be cleared, so add a TODO comment to
that effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-20-peter.maydell@linaro.org
In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule
R_LLRP). (In previous versions of the architecture this was either
required or IMPDEF.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-18-peter.maydell@linaro.org
In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR
are zeroed for an exception taken to Non-secure state; for an
exception taken to Secure state they become UNKNOWN, and we chose to
leave them at their previous values.
In v8.1M the behaviour is specified more tightly and these registers
are always zeroed regardless of the security state that the exception
targets (see rule R_KPZV). Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-17-peter.maydell@linaro.org
The FPDSCR register has a similar layout to the FPSCR. In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4). Update the reset value and the code
that handles writes to this register accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
Implement the new-in-v8.1M FPCXT_S floating point system register.
This is for saving and restoring the secure floating point context,
and it reads and writes bits [27:0] from the FPSCR and the
CONTROL.SFPA bit in bit [31].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-14-peter.maydell@linaro.org
Factor out the code which handles M-profile lazy FP state preservation
from full_vfp_access_check(); accesses to the FPCXT_NS register are
a special case which need to do just this part (corresponding in the
pseudocode to the PreserveFPState() function), and not the full
set of actions matching the pseudocode ExecuteFPCheck() which
normal FP instructions need to do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201119215617.29887-13-peter.maydell@linaro.org
We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR
in the previous commit; use it in a couple of places in existing code,
where we're masking out everything except NZCV for the "load to Rt=15
sets CPSR.NZCV" special case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-12-peter.maydell@linaro.org
v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves
like the existing FPSCR, except that it reads and writes only bits
[31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the
FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not
permitted.)
Implement the register. Since we don't yet implement MVE, we handle
the QC bit as RES0, with todo comments for where we will need to add
support later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-11-peter.maydell@linaro.org
Implement the new-in-v8.1M VLDR/VSTR variants which directly
read or write FP system registers to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-10-peter.maydell@linaro.org
The constant-expander functions like negate, plus_2, etc, are
generally useful; move them up in translate.c so we can use them in
the VFP/Neon decoders as well as in the A32/T32/T16 decoders.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-9-peter.maydell@linaro.org
Currently M-profile borrows the A-profile code for VMSR and VMRS
(access to the FP system registers), because all it needs to support
is the FPSCR. In v8.1M things become significantly more complicated
in two ways:
* there are several new FP system registers; some have side effects
on read, and one (FPCXT_NS) needs to avoid the usual
vfp_access_check() and the "only if FPU implemented" check
* all sysregs are now accessible both by VMRS/VMSR (which
reads/writes a general purpose register) and also by VLDR/VSTR
(which reads/writes them directly to memory)
Refactor the structure of how we handle VMSR/VMRS to cope with this:
* keep the M-profile code entirely separate from the A-profile code
* abstract out the "read or write the general purpose register" part
of the code into a loadfn or storefn function pointer, so we can
reuse it for VLDR/VSTR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-8-peter.maydell@linaro.org
For M-profile before v8.1M, the only valid register for VMSR/VMRS is
the FPSCR. We have a comment that states this, but the actual logic
to forbid accesses for any other register value is missing, so we
would end up with A-profile style behaviour. Add the missing check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-7-peter.maydell@linaro.org
In v8.1M the new CLRM instruction allows zeroing an arbitrary set of
the general-purpose registers and APSR. Implement this.
The encoding is a subset of the LDMIA T2 encoding, using what would
be Rn=0b1111 (which UNDEFs for LDMIA).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-6-peter.maydell@linaro.org
Implement the v8.1M VSCCLRM insn, which zeros floating point
registers if there is an active floating point context.
This requires support in write_neon_element32() for the MO_32
element size, so add it.
Because we want to use arm_gen_condlabel(), we need to move
the definition of that function up in translate.c so it is
before the #include of translate-vfp.c.inc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-5-peter.maydell@linaro.org
In arm_cpu_realizefn() we check whether the board code disabled EL3
via the has_el3 CPU object property, which we create if the CPU
starts with the ARM_FEATURE_EL3 feature bit. If it is disabled, then
we turn off ARM_FEATURE_EL3 and also zero out the relevant fields in
the ID_PFR1 and ID_AA64PFR0 registers.
This codepath was incorrectly being taken for M-profile CPUs, which
do not have an EL3 and don't set ARM_FEATURE_EL3, but which may have
the M-profile Security extension and so should have non-zero values
in the ID_PFR1.Security field.
Restrict the handling of the feature flag to A/R-profile cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-4-peter.maydell@linaro.org
In v8.1M the PXN architecture extension adds a new PXN bit to the
MPU_RLAR registers, which forbids execution of code in the region
from a privileged mode.
This is another feature which is just in the generic "in v8.1M" set
and has no ID register field indicating its presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-3-peter.maydell@linaro.org
Implement the "Load VSX Vector Word & Splat Indexed" opcode, introduced
in Power ISA v3.0.
Buglink: https://bugs.launchpad.net/qemu/+bug/1793608
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <d7d533e18c2bc10d924ee3e09907ff2b41fddb3a.1604912739.git.thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The semihosting SYS_HEAPINFO call is supposed to return an array
of four guest addresses:
* base of heap memory
* limit of heap memory
* base of stack memory
* limit of stack memory
Some semihosting programs (including those compiled to use the
'newlib' embedded C library) use this call to work out where they
should initialize themselves to.
QEMU's implementation when in system emulation mode is very
simplistic: we say that the heap starts halfway into RAM and
continues to the end of RAM, and the stack starts at the top of RAM
and works down to the bottom. Unfortunately the code assumes that
the base address of RAM is at address 0, so on boards like 'virt'
where this is not true the addresses returned will all be wrong and
the guest application will usually crash.
Conveniently since all Arm boards call arm_load_kernel() we have the
base address of the main RAM block in the arm_boot_info struct which
is accessible via the CPU object. Use this to return sensible values
from SYS_HEAPINFO.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20201119092346.32356-1-peter.maydell@linaro.org
Using a target unsigned long would limit the Input Address to a LPAE
page-walk to 32 bits on AArch32 and 64 bits on AArch64. This is okay
for stage 1 or on AArch64, but it is insufficient for stage 2 on
AArch32. In that later case, the Input Address can have up to 40 bits.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201118150414.18360-1-remi@remlab.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Control Program Name Code (CPNC) portion of the diag318
info must be set within the SIE block of each VCPU in the
configuration. The handler will iterate through each VCPU
and dirty the diag318_info reg to be synced with KVM on a
subsequent sync_regs call.
Additionally, the diag318 info resets must be handled via
userspace. As such, QEMU will reset this value for each
VCPU during a modified clear, load normal, and load clear
reset event.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20201113221022.257054-1-walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Requested Privilege Level field is 2 bits, the Table Indicator field
is 1 bit and the Index field is the remaining 15 bits, with TI=0 meaning
GDT and TI=1 meaning LDT.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20201116200414.28286-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
-----BEGIN PGP SIGNATURE-----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=A3/B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-17' into staging
* Fixes for compiling on Haiku, and add Haiku VM for compile-testing
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
# gpg: Signature made Tue 17 Nov 2020 09:20:31 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-17:
max111x: put it into the 'misc' category
nand: put it into the 'storage' category
ads7846: put it into the 'input' category
ssd0323: put it into the 'display' category
gitlab-ci: Use $CI_REGISTRY instead of hard-coding registry.gitlab.com
target/microblaze: Fix possible array out of bounds in mmu_write()
tests/vm: update NetBSD to 9.1
tests/vm: Add Haiku test based on their vagrant images
configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.h
configure: Do not build pc-bios/optionrom on Haiku
configure: Fix the _BSD_SOURCE define for the Haiku build
qemu/bswap: Remove unused qemu_bswap_len()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the mtspr helper we attempt to check for "is the timer disabled"
with "if (env->ttmr & TIMER_NONE)". This is wrong because TIMER_NONE
is zero and the condition is always false (Coverity complains about
the dead code.)
The correct check would be to test whether the TTMR_M field in the
register is equal to TIMER_NONE instead. However, the
cpu_openrisc_timer_update() function checks whether the timer is
enabled (it looks at cpu->env.is_counting, which is set to 0 via
cpu_openrisc_count_stop() when the TTMR_M field is set to
TIMER_NONE), so there's no need to check for "timer disabled" in the
target/openrisc code. Instead, simply remove the dead code.
Fixes: Coverity CID 1005812
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201103114654.18540-1-peter.maydell@linaro.org
The size of env->mmu.regs is 3, but the range of 'rn' is [0, 5].
To avoid data access out of bounds, only if 'rn' is less than 3, we
can print env->mmu.regs[rn]. In other cases, we can print
env->mmu.regs[MMU_R_TLBX].
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <5FA10ABA.1080109@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
