We handle this resource rather meticulously in
shutdown/kill/wait/__exit__ et al, through the laborious mechanisms in
_do_shutdown().
Quiet this pylint warning here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-7-jsnow@redhat.com
Message-id: 20210517184808.3562549-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Shift the open() call later so that the pylint pragma applies *only* to
that one open() call. Add a note that suggests why this is safe: the
resource is unconditionally cleaned up in _post_shutdown().
_post_shutdown is called after failed launches (see launch()), and
unconditionally after every call to shutdown(), and therefore also on
__exit__.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-6-jsnow@redhat.com
Message-id: 20210517184808.3562549-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
use run() instead of Popen() -- to assert to pylint that we are not
forgetting to close a long-running program.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-4-jsnow@redhat.com
Message-id: 20210517184808.3562549-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
One less file resource to manage, and it helps quiet some pylint >=
2.8.0 warnings about not using a with-context manager for the open call.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-3-jsnow@redhat.com
Message-id: 20210517184808.3562549-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Slightly different versions for the same utility code are currently
present on different locations. This unifies them all, giving
preference to the version from virtiofs_submounts.py, because of the
last tweaks added to it.
While at it, this adds a "qemu.utils" module to host the utility
function and a test.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-4-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
[Squashed in below fix. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210601154546.130870-2-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Each instance of qemu.machine.QEMUMachine currently has a "test
directory", which may not have any relation to a "test", and it's
really a temporary directory.
Users instantiating the QEMUMachine class will be able to set the
location of the directory that will *contain* the QEMUMachine unique
temporary directory, so that parameter name has been changed from
test_dir to base_temp_dir.
A property has been added to allow users to access it without using
private attributes, and with that, the directory is created on first
use of the property.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210211220146.2525771-3-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Closing a file that is open for writing, and then reading from it
sounds like a better idea than the opposite, given that the content
will be flushed.
Reference: https://docs.python.org/3/library/io.html#io.IOBase.close
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210211220146.2525771-2-crosa@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
While attempting to debug some console weirdness I thought it would be
worth making it easier to see what it had inside.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20201210190417.31673-6-alex.bennee@linaro.org>
The first step to debug a thing is to know what created the thing in
the first place. Add some prefixes so random tmpdir's have something
grep in the code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201117173635.29101-3-alex.bennee@linaro.org>
We enabled callers to interface directly with settimeout, but this
reacts poorly with blocking/nonblocking operation; as they are using the
same internal mechanism.
1. Whenever we change the blocking mechanism temporarily, always set it
back to what it was afterwards.
2. Disallow callers from setting a timeout of "0", which means
Non-blocking mode. This is going to create more weird problems than
anybody wants, so just forbid it.
I opt not to coerce '0' to 'None' to maintain the principal of least
surprise in mirroring the semantics of Python's interface.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201009175123.249009-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Nested if conditions don't change when the exception block fires; we
need to explicitly re-raise the error if we didn't intend to capture and
suppress it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201009175123.249009-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Formalize the options used for checking the python library. You can run
mypy from the directory that mypy.ini is in by typing `mypy qemu/`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20201009175123.249009-2-jsnow@redhat.com
[Edit: Added newline; thanks Bin Meng --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Use the "from ..." phrasing when re-raising errors to preserve their
initial context, to help aid debugging when things go wrong.
This also silences a pylint 2.6.0+ error.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We can work directly in bytes instead of translating back and forth to
string, which removes the question of which encodings to use.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Finish the typing of console_socket.py with annotations and no code
changes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Mypy needs just a little help to guess the type here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The types and names of the parameters must match the socket.socket interface.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The type and parameter names of recv() should match socket.socket().
OK, easy enough, but in the cases we don't pass straight through to the
real socket implementation, we probably can't accept such flags. OK, for
now, assert that we don't receive flags in such cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These should all be purely annotations with no changes in behavior at
all. You need to be in the python folder, but you should be able to
confirm that these annotations are correct (or at least self-consistent)
by running `mypy --strict qemu`.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These arguments don't need to be mutable and aren't really used as
such. Clarify their types as immutable and adjust code to match where
necessary.
In general, It's probably best not to accept a user-defined mutable
object and store it as internal object state unless there's a strong
justification for doing so. Instead, try to use generic types as input
with empty tuples as the default, and coerce to list where necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201006235817.3280413-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As always, Optional[T] causes problems with unchecked access. Add a
helper that asserts the pipe is present before we attempt to talk with
it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Like many other Optional[] types, it's not always a given that this
object will be set. Wrap it in a type-shim that raises a meaningful
error and will always return a concrete type.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
machine.py and qmp.py both do the same thing here; refactor machine.py
to use qmp.py's functionality more directly.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201006235817.3280413-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If the timeout is 0, we can get None back. Handle this explicitly.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Don't append to the _remove_files list during _base_args; instead do so
during _launch. Rework _base_args as a @property to help facilitate
this impression.
This has the additional benefit of making the type of _console_address
easier to analyze statically.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Put the init arg handling all at the top, and mostly in order (deviating
when one is dependent on another), and put what is effectively runtime
state declaration at the bottom.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Prior to this, it's difficult for mypy to intuit what the concrete type
of the monitor address is; it has difficulty inferring the type across
two variables.
Create _monitor_address as a property that always returns a valid
address to simplify static type analysis.
To preserve our ability to clean up, use a simple boolean to indicate
whether or not we should try to clean up the sock file after execution.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Borrowed from the QAPI cleanup series, use the same configuration to
standardize the way we write and sort imports.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The primary purpose of this change is to clean up
machine.py's console_socket property to return a single type,
a ConsoleSocket.
ConsoleSocket now derives from a socket, which means that
in the default case (of not draining), machine.py
will see the same behavior as it did prior to ConsoleSocket.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200717203041.9867-3-robert.foley@linaro.org>
Message-Id: <20200724064509.331-16-alex.bennee@linaro.org>
The changes to console_socket.py and machine.py are to
cleanup for pylint and flake8.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200717203041.9867-2-robert.foley@linaro.org>
Message-Id: <20200724064509.331-15-alex.bennee@linaro.org>
3 seconds is too short for some tests running inside busy VMs. Build it out to
a rather generous 30 seconds to find out conclusively if there are more severe
problems in the merge/CI tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20200720160252.104139-2-jsnow@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the case that we receive a reply but are unable to understand it,
use this exception name to indicate that case.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200710052220.3306-7-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
mypy and python type hints are not powerful enough to properly describe
JSON messages in Python 3.6. The best we can do, generally, is describe
them as Dict[str, Any].
Add casts to coerce this type for static analysis; but do NOT enforce
this type at runtime in any way.
Note: Python 3.8 adds a TypedDict construct which allows for the
description of more arbitrary Dictionary shapes. There is a third-party
module, "Pydantic", which is compatible with 3.6 that can be used
instead of the JSON library that parses JSON messages to fully-typed
Python objects, and may be preferable in some cases.
(That is well beyond the scope of this commit or series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200710052220.3306-6-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This makes typing the qmp library difficult, as it necessitates wrapping
Optional[] around the type for every return type up the stack. At some
point, it becomes difficult to discern or remember why it's None instead
of the expected object.
Use the python exception system to tell us exactly why we didn't get an
object. Remove this special-cased return.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200710052220.3306-5-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When I initially split this out, I considered this more of a machine
error than a QMP protocol error, but I think that's misguided.
Move this back to qmp.py and name it QMPResponseError. Convert
qmp.command() to use this exception type.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200710052220.3306-4-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Define some common types that we'll need to annotate a lot of other
functions going forward.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200710052220.3306-2-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Machine.wait() does not appear to be used except in the acceptance tests,
and an infinite timeout by default in a test suite is not the most helpful.
Change it to 3 seconds, like the default shutdown timeout.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-13-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
If the user kills QEMU on purpose, we don't need to warn
them about that having happened: they know already.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-12-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is done primarily to avoid the 'bare except' pattern, which
suppresses all exceptions during shutdown and can obscure errors.
Replace this with a pattern that isolates the different kind of shutdown
paradigms (_hard_shutdown and _soft_shutdown), and a new fallback shutdown
handler (_do_shutdown) that gracefully attempts one before the other.
This split now also ensures that no matter what happens,
_post_shutdown() is always invoked.
shutdown() changes in behavior such that if it attempts to do a graceful
shutdown and is unable to, it will now always raise an exception to
indicate this. This can be avoided by the test writer in three ways:
1. If the VM is expected to have already exited or is in the process of
exiting, wait() can be used instead of shutdown() to clean up resources
instead. This helps avoid race conditions in shutdown.
2. If a test writer is expecting graceful shutdown to fail, shutdown
should be called in a try...except block.
3. If the test writer has no interest in performing a graceful shutdown
at all, kill() can be used instead.
Handling shutdown in this way makes it much more explicit which type of
shutdown we want and allows the library to report problems with this
process.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-11-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
At this point, shutdown(has_quit=True) and wait() do essentially the
same thing; they perform cleanup without actually instructing QEMU to
quit.
Define one in terms of the other.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-8-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Three seconds is hardcoded. Use it as a default parameter instead, and use that
value for both waits that may occur in the function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-7-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
If the VM is not launched, don't try to shut it down. As a change,
_post_shutdown now unconditionally also calls _early_cleanup in order to
offer comprehensive object cleanup in failure cases.
As a courtesy, treat it as a NOP instead of rejecting it as an
error. This is slightly nicer for acceptance tests where vm.shutdown()
is issued unconditionally in tearDown callbacks.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200710050649.32434-6-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is primarily for consistency, and is a step towards wait() and
shutdown() sharing the same implementation so that the two cleanup paths
cannot diverge.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-5-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some parts of cleanup need to occur prior to shutdown, otherwise
shutdown might break. Move this into a suitably named method/callback.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-4-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It's not important to do this before waiting for the process to exit, so
it can be done during generic post-shutdown cleanup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-3-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move more cleanup actions into _post_shutdown. As a change, if QEMU
should so happen to be terminated during a call to wait(), that event
will now be logged.
This is not likely to occur during normative use.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200710050649.32434-2-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We add the ConsoleSocket object, which has a socket interface
and which will consume all arriving characters on the
socket, placing them into an in memory buffer.
This will also provide those chars via recv() as
would a regular socket.
ConsoleSocket also has the option of dumping
the console bytes to a log file.
We also give QEMUMachine the option of using ConsoleSocket
to drain and to use for logging console to a file.
By default QEMUMachine does not use ConsoleSocket.
This is added in preparation for use by basevm.py in a later commit.
This is a workaround we found was needed for basevm.py since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-9-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-13-alex.bennee@linaro.org>
It can be None; so add assertions or exceptions where appropriate to
guard the access accordingly.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-30-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In truth, if you don't do this, you'll just get a TypeError
exception. Now, you'll get an AssertionError.
Is this tangibly better? No.
Does mypy complain less? Yes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-21-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The type system doesn't want integers.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-15-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
mypy considers it incorrect to use `bool` to statically return false,
because it will assume that it could conceivably return True, and gives
different analysis in that case. Use a None return to achieve the same
effect, but make mypy happy.
Note: Pylint considers function signatures as code that might trip the
duplicate-code checker. I'd rather not disable this as it does not
trigger often in practice, so I'm disabling it as a one-off and filed a
change request; see https://github.com/PyCQA/pylint/issues/3619
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-14-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Note:
A bug in typeshed (https://github.com/python/typeshed/issues/3977)
misinterprets the type of makefile(). Work around this by explicitly
stating that we are opening a text-mode file.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-13-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the Python3 style instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-12-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Mostly, ignore the "no bare except" rule, because flake8 is not
contextual and cannot determine if we re-raise. Pylint can, though, so
always prefer pylint for that.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200528222129.23826-5-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Bring our these files up to speed with pylint 2.5.0.
Add a pylintrc file to formalize which pylint subset
we are targeting.
The similarity ignore is there to suppress similarity
reports across imports, which for typing constants,
are going to trigger this report erroneously.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200528222129.23826-4-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Python 3.5 and above do not print a warning when logging is not
configured. As a library, it's best practice to leave logging
configuration to the client executable.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-22-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add method to hard-kill vm, without any quit commands.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200217150246.29180-19-vsementsov@virtuozzo.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
With a QEMU bug, it can happen that the QEMU process doesn't react to a
'quit' QMP command. If we got an exception during previous QMP
communication (e.g. iotests Timeout expiring), we could also be in an
inconsistent state where after sending 'quit' we immediately read an old
response and close the socket even though the 'quit' command wasn't
processed yet. Both cases would lead to a hanging test.
Fix this by waiting for the QEMU process to exit after sending 'quit'
with a timeout, and if it doesn't happen within three seconds, send
SIGKILL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-3-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMUMachine writes some messages to the default logger.
But it sometimes hard to read the output if we have requests to
more than one VM.
This patch adds a label to the logger in the debug mode.
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200316103203.10046-1-ovoshcha@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Currently the QEMU Python module limits the QEMUMachine class to
use the first serial console.
Some machines/guest might use another console than the first one as
the 'boot console'. For example the Raspberry Pi uses the second
(AUX) console.
To be able to use the Nth console as default, we simply need to
connect all the N - 1 consoles to the null chardev.
Add an index argument, so we can use a specific serial console as
default.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-5-f4bug@amsat.org>
[PMD: zero-initialize _console_index in __init__()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In case qemu process dies the "monitor.cmd" returns None which gets
passed to the "__negotiate_capabilities" and leads to unhandled
exception. Let's only check the resp in case it has a value.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120071202.30646-1-ldoktor@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On ppc64le, the accel.kvm_available() check may wrongly
return False because the host arch (as returned by os.uname[4])
and the target arch (ppc64) mismatch. In order to solve this
it is added an ppc64le -> ppc64 mapping which is used as an
fallback verification.
Fixes: 53a049d7d7
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200205203250.30526-5-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The `error` and `timeout` attributes in QEMUMonitorProtocol are
not used, so this delete them.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191227134101.244496-6-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This implement the __enter__ and __exit__ functions on
QEMUMonitorProtocol class so that it can be used on 'with'
statement and the resources will be free up on block end:
with QEMUMonitorProtocol(socket_path) as qmp:
qmp.connect()
qmp.command('query-status')
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20200204141111.3207-5-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently the timeout of QEMUMonitorProtocol.accept() is
hard-coded to 15.0 seconds. This added the parameter `timeout`
so the value can be configured by the user.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20200204141111.3207-4-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This clean up the pylint-3 report on qmp:
************* Module qemu.qmp
python/qemu/qmp.py:1:0: C0111: Missing module docstring (missing-docstring)
python/qemu/qmp.py:17:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:21:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:25:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:29:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:33:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:33:0: R0205: Class 'QEMUMonitorProtocol' inherits from object, can be safely removed from bases in python3 (useless-object-inheritance)
python/qemu/qmp.py:80:4: R1710: Either all return statements in a function should return an expression, or none of them should. (inconsistent-return-statements)
python/qemu/qmp.py:131:4: R1710: Either all return statements in a function should return an expression, or none of them should. (inconsistent-return-statements)
python/qemu/qmp.py:159:4: R1710: Either all return statements in a function should return an expression, or none of them should. (inconsistent-return-statements)
python/qemu/qmp.py:245:4: C0111: Missing method docstring (missing-docstring)
python/qemu/qmp.py:249:4: C0111: Missing method docstring (missing-docstring)
python/qemu/qmp.py:252:4: C0111: Missing method docstring (missing-docstring)
python/qemu/qmp.py:255:4: C0111: Missing method docstring (missing-docstring)
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191227134101.244496-3-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The socket.error is deprecated from Python 3.3, instead it is
made a link to OSError. This change replaces the occurences
of socket.error with OSError.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20191227134101.244496-2-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
__init_.py import some sub-modules unnecessarily. So let's
clean it up.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Suggested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191216191438.93418-6-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This adds a method to check if the tcg accelerator is enabled
in the QEMU binary.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191216191438.93418-5-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Currently kvm_available() checks for the presence of kvm module
and, if target and host arches don't mismatch. This patch adds
an 3rd checking: if QEMU binary was compiled with kvm
support.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191216191438.93418-4-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Since commit cbe6d6365a the command `qemu -accel help` returns
the list of accelerators enabled in the QEMU binary. This adds
the list_accel() method which return that same list.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191216191438.93418-3-wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This creates the 'accel' Python module to be the home for
utilities that deal with accelerators. Also moved kvm_available()
from __init__.py to this new module.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216191438.93418-2-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The QEMUMachine VM has a monitor setup on which an QMP
connection is always attempted on _post_launch() (executed
by launch()). In case the QEMU process immediatly exits
then the qmp.accept() (used to establish the connection) stalls
until it reaches timeout and consequently an exception raises.
That behavior is undesirable when, for instance, it needs to
gather information from the QEMU binary ($ qemu -cpu list) or a
test which launches the VM expecting its failure.
This patch adds the set_qmp_monitor() method to QEMUMachine that
allows turn off the creation of the monitor machinery on VM launch.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191211185536.16962-2-wainersm@redhat.com>
[Cleber: trivial indentation fix]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Currently, the console socket on QEMUMachine is closed after the QMP
command to gracefully exit QEMU is executed. Because of a possible
deadlock (QEMU waiting for the socket to become writable) let's close
the console socket earlier.
Reference: <20190607034214.GB22416@habkost.net>
Reference: https://bugs.launchpad.net/qemu/+bug/1829779
From: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190911023558.4880-2-crosa@redhat.com>
iotests.py itself does not store socket files, but machine.py and
qtest.py do. iotests.py needs to pass the respective path to them, and
they need to adhere to it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We've got a separate option to configure the accelerator nowadays, which
is shorter to type and the preferred way of specifying an accelerator.
Use it in the source and examples to show that it is the favored option.
(However, do not touch the places yet which also specify other machine
options or multiple accelerators - these are currently still better
handled with one single "-machine" statement instead)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190904052739.22123-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If a test has issued a quit command already (which may be useful to do
explicitly because the test wants to show its effects),
QEMUMachine.shutdown() should not do so again. Otherwise, the VM may
well return an ECONNRESET which will lead QEMUMachine.shutdown() to
killing it, which then turns into a "qemu received signal 9" line.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we're out in a new module, do a quick cursory pass of some of the
more obvious style issues.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190627212816.27298-3-jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's not obvious that something named __init__.py actually houses
important code that isn't relevant to python packaging glue. Move the
QEMUMachine and related error classes out into their own module.
Adjust users to the new import location.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190627212816.27298-2-jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Before, event_match didn't always recurse if the event value was not a
dictionary, and would instead check for equality immediately.
By delaying equality checking to post-recursion, we can allow leaf
values like "5" to match "None" and take advantage of the generic
None-returns-True clause.
This makes the matching a little more obviously consistent at the
expense of being able to check for explicit None values, which is
probably not that important given what this function is used for.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190528183857.26167-1-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of event_wait which looks for a single event, add an events_wait
which can look for any number of events simultaneously. However, it
will still only return one at a time, whichever happens first.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190523170643.20794-4-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The set_console() utility function either adds a device based on the
explicitly given device type, or adds a known good type of device
based on the machine type.
But, for a number of machine types, it may be impossible or
inconvenient to add the devices by means of "-device" command line
options, and then it may better to just use the "-serial" option and
let QEMU itself, based on the machine type, set the device
accordingly.
To achieve that, the behavior of set_console() now flags the intention
to add a console device on launch(), and if no explicit device type is
given the "-serial" option is going to be added to the QEMU command
line, instead of raising exceptions.
Based on testing with different machine types, the CONSOLE_DEV_TYPES
is not necessary anymore, so it's being removed, as is the logic to
use it.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-13-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
-----BEGIN PGP SIGNATURE-----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=dwff
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of "🥑 enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even when the launch of QEMU succeeds, it's useful to have the command
line recorded.
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190202005610.24048-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
