Currently, if the function fails during the key_len check, the op_code
does not have a proper value, causing virtio_crypto_free_create_session_req
not to free the memory correctly, leading to a memory leak.
By setting the op_code before performing any checks, we ensure that
virtio_crypto_free_create_session_req has the correct context to
perform cleanup operations properly, thus preventing memory leaks.
ASAN log:
==3055068==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 512 byte(s) in 1 object(s) allocated from:
#0 0x5586a75e6ddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7fb6b63b6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x5586a864bbde in virtio_crypto_handle_ctrl hw/virtio/virtio-crypto.c:407:19
#3 0x5586a94fc84c in virtio_queue_notify_vq hw/virtio/virtio.c:2277:9
#4 0x5586a94fc0a2 in virtio_queue_host_notifier_read hw/virtio/virtio.c:3641:9
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-Id: <20240702211835.3064505-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
loongarch added a common library for edk2 to
parse flash base addresses through fdt.
For compatibility with other architectures,
the flash block size in qemu is now changed to 256k.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240624033319.999631-1-lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Remove extioi INT_encode encode mode, because we don't emulate it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240718083254.748179-1-gaosong@loongson.cn>
GDB already support LoongArch vector extension[1], QEMU gdb adds
LoongArch vector registers support, so that users can use 'info all-registers'
to get all vector registers values.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1e9569f383a3d5a88ee07d0c2401bd95613c222e
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewd-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240711024454.3075183-1-gaosong@loongson.cn>
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
-----BEGIN PGP SIGNATURE-----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=/aEm
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaZFlUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iJuEACtVh1Wp93XMsL3llAZkQlx
# DUCnDCvAM2qiiTIMOqPQzeKTIkRV9aFh1YWzOtMFKai6UkBU6p1b4bPqb5SIr99G
# Ayps4+WzAHsjTqBGEpIIDWL6GqMwv9azBnRAYNb+Cg9O3SzEnCdGOKCfGYTXXPRz
# zQ1NIgqZSUC5jg3XgkU22J3VMsOUWijbzxnGXhOyemSIEhREl+t6Ns3ca3n47/jk
# JIw1g6o0mpefPPkaLq6ftVwpn1L63iYQugn4VCrIhtIoOM8vmnShbI9/GwzL4AYk
# n28nwPl948Xby13kCYmu6Slt8Rmm7M33pBDJzsVtbaeBSd44XHrov8Y1+e1FhAco
# lxrWY/2rG9HiWKGLdAeCKwVxB186DKiTmuK7lcN+eBu3VbOLjDiVE0d1bK4HqGyc
# nzA/Aq81Y9p5Z7wzX40sVFlq0j1pQDQWk6GgPfMA4ueHKEEobxC3C+k1q9m02gjQ
# qesOFzViiGe0j7JER84qqcatIaTk09xfbXL/uMZx8oP/iKa1pyMUx2blChXOXVTx
# oGkO2h3/QCpRIos8d8WM/bso16EkpraInM4748iumSLuxDxTwiIikK/hpsCLDwUN
# dLsH/hAMz+yQOFubFoRt4IlsGVnk5asmTDMb4S8RojdF2KzHuzbJMgdEOe62631g
# IOAc7Tn3TIm5MpAxXOXgJA==
# =/aEm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 11:19:17 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
hvf: arm: Do not advance PC when raising an exception
tests/arm-cpu-features: Do not assume PMU availability
tests/tcg/aarch64: Add test cases for SME FMOPA (widening)
target/arm: Use FPST_F16 for SME FMOPA (widening)
target/arm: Use float_status copy in sme_fmopa_s
hw/arm/smmu: Refactor SMMU OAS
hw/arm/smmuv3: Support and advertise nesting
hw/arm/smmuv3: Handle translation faults according to SMMUPTWEventInfo
hw/arm/smmuv3: Support nested SMMUs in smmuv3_notify_iova()
hw/arm/smmu: Support nesting in the rest of commands
hw/arm/smmu: Introduce smmu_iotlb_inv_asid_vmid
hw/arm/smmu: Support nesting in smmuv3_range_inval()
hw/arm/smmu-common: Support nested translation
hw/arm/smmu-common: Add support for nested TLB
hw/arm/smmu-common: Rework TLB lookup for nesting
hw/arm/smmuv3: Translate CD and TT using stage-2 table
hw/arm/smmu: Introduce CACHED_ENTRY_TO_ADDR
hw/arm/smmu: Consolidate ASID and VMID types
hw/arm/smmu: Split smmuv3_translate()
hw/arm/smmu: Use enum for SMMU stage
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
hvf did not advance PC when raising an exception for most unhandled
system registers, but it mistakenly advanced PC when raising an
exception for GICv3 registers.
Cc: qemu-stable@nongnu.org
Fixes: a2260983c6 ("hvf: arm: Add support for GICv3")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240716-pmu-v3-4-8c7c1858a227@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-4-richard.henderson@linaro.org
Message-Id: 172090222034.13953.16888708708822922098-1@git.sr.ht
[rth: Split test from a larger patch, tidy assembly]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This operation has float16 inputs and thus must use
the FZ16 control not the FZ control.
Cc: qemu-stable@nongnu.org
Fixes: 3916841ac7 ("target/arm: Implement FMOPA, FMOPS (widening)")
Reported-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-3-richard.henderson@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We made a copy above because the fp exception flags
are not propagated back to the FPST register, but
then failed to use the copy.
Cc: qemu-stable@nongnu.org
Fixes: 558e956c71 ("target/arm: Implement FMOPA, FMOPS (non-widening)")
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-2-richard.henderson@linaro.org
[rth: Split from a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMMUv3 OAS is currently hardcoded in the code to 44 bits, for nested
configurations that can be a problem, as stage-2 might be shared with
the CPU which might have different PARANGE, and according to SMMU manual
ARM IHI 0070F.b:
6.3.6 SMMU_IDR5, OAS must match the system physical address size.
This patch doesn't change the SMMU OAS, but refactors the code to
make it easier to do that:
- Rely everywhere on IDR5 for reading OAS instead of using the
SMMU_IDR5_OAS macro, so, it is easier just to change IDR5 and
it propagages correctly.
- Add additional checks when OAS is greater than 48bits.
- Remove unused functions/macros: pa_range/MAX_PA.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-19-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is in place, consolidate parsing of STE cfg and setting
translation stage.
Advertise nesting if stage requested is "nested".
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-18-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, to check if faults are enabled, it was sufficient to check
the current stage of translation and check the corresponding
record_faults flag.
However, with nesting, it is possible for stage-1 (nested) translation
to trigger a stage-2 fault, so we check SMMUPTWEventInfo as it would
have the correct stage set from the page table walk.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-17-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IOMMUTLBEvent only understands IOVA, for stage-1 or stage-2
SMMU instances we consider the input address as the IOVA, but when
nesting is used, we can't mix stage-1 and stage-2 addresses, so for
nesting only stage-1 is considered the IOVA and would be notified.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-16-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some commands need rework for nesting, as they used to assume S1
and S2 are mutually exclusive:
- CMD_TLBI_NH_ASID: Consider VMID if stage-2 is supported
- CMD_TLBI_NH_ALL: Consider VMID if stage-2 is supported, otherwise
invalidate everything, this required a new vmid invalidation
function for stage-1 only (ASID >= 0)
Also, rework trace events to reflect the new implementation.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-15-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, Instead of doing TLB invalidation by ASID only, VMID will be
also required.
Add smmu_iotlb_inv_asid_vmid() which invalidates by both ASID and VMID.
However, at the moment this function is only used in SMMU_CMD_TLBI_NH_ASID
which is a stage-1 command, so passing VMID = -1 keeps the original
behaviour.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-14-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With nesting, we would need to invalidate IPAs without
over-invalidating stage-1 IOVAs. This can be done by
distinguishing IPAs in the TLBs by having ASID=-1.
To achieve that, rework the invalidation for IPAs to have a
separate function, while for IOVA invalidation ASID=-1 means
invalidate for all ASIDs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-13-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When nested translation is requested, do the following:
- Translate stage-1 table address IPA into PA through stage-2.
- Translate stage-1 table walk output (IPA) through stage-2.
- Create a single TLB entry from stage-1 and stage-2 translations
using logic introduced before.
smmu_ptw() has a new argument SMMUState which include the TLB as
stage-1 table address can be cached in there.
Also in smmu_ptw(), a separate path used for nesting to simplify the
code, although some logic can be combined.
With nested translation class of translation fault can be different,
from the class of the translation, as faults from translating stage-1
tables are considered as CLASS_TT and not CLASS_IN, a new member
"is_ipa_descriptor" added to "SMMUPTWEventInfo" to differ faults
from walking stage 1 translation table and faults from translating
an IPA for a transaction.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-12-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for nested (combined) TLB entries.
The main function combine_tlb() is not used here but in the next
patches, but to simplify the patches it is introduced first.
Main changes:
1) New field added in the SMMUTLBEntry struct: parent_perm, for
nested TLB, holds the stage-2 permission, this can be used to know
the origin of a permission fault from a cached entry as caching
the “and” of the permissions loses this information.
SMMUPTWEventInfo is used to hold information about PTW faults so
the event can be populated, the value of stage used to be set
based on the current stage for TLB permission faults, however
with the parent_perm, it is now set based on which perm has
the missing permission
When nesting is not enabled it has the same value as perm which
doesn't change the logic.
2) As combined TLB implementation is used, the combination logic
chooses:
- tg and level from the entry which has the smallest addr_mask.
- Based on that the iova that would be cached is recalculated.
- Translated_addr is chosen from stage-2.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next patch, combine_tlb() will be added which combines 2 TLB
entries into one for nested translations, which chooses the granule
and level from the smallest entry.
This means that with nested translation, an entry can be cached with
the granule of stage-2 and not stage-1.
However, currently, the lookup for an IOVA is done with input stage
granule, which is stage-1 for nested configuration, which will not
work with the above logic.
This patch reworks lookup in that case, so it falls back to stage-2
granule if no entry is found using stage-1 granule.
Also, drop aligning the iova to avoid over-aligning in case the iova
is cached with a smaller granule, the TLB lookup will align the iova
anyway for each granule and level, and the page table walker doesn't
consider the page offset bits.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-10-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ARM SMMU architecture specification (ARM IHI 0070 F.b),
In "5.2 Stream Table Entry":
[51:6] S1ContextPtr
If Config[1] == 1 (stage 2 enabled), this pointer is an IPA translated by
stage 2 and the programmed value must be within the range of the IAS.
In "5.4.1 CD notes":
The translation table walks performed from TTB0 or TTB1 are always performed
in IPA space if stage 2 translations are enabled.
This patch implements translation of the S1 context descriptor pointer and
TTBx base addresses through the S2 stage (IPA -> PA)
smmuv3_do_translate() is updated to have one arg which is translation
class, this is useful to:
- Decide wether a translation is stage-2 only or use the STE config.
- Populate the class in case of faults, WALK_EABT is left unchanged
for stage-1 as it is always IN, while stage-2 would match the
used class (TT, IN, CD), this will change slightly when the ptw
supports nested translation as it can also issue TT event with
class IN.
In case for stage-2 only translation, used in the context of nested
translation, the stage and asid are saved and restored before and
after calling smmu_translate().
Translating CD or TTBx can fail for the following reasons:
1) Large address size: This is described in
(3.4.3 Address sizes of SMMU-originated accesses)
- For CD ptr larger than IAS, for SMMUv3.1, it can trigger either
C_BAD_STE or Translation fault, we implement the latter as it
requires no extra code.
- For TTBx, if larger than the effective stage 1 output address size, it
triggers C_BAD_CD.
2) Faults from PTWs (7.3 Event records)
- F_ADDR_SIZE: large address size after first level causes stage 2 Address
Size fault (Also in 3.4.3 Address sizes of SMMU-originated accesses)
- F_PERMISSION: Same as an address translation. However, when
CLASS == CD, the access is implicitly Data and a read.
- F_ACCESS: Same as an address translation.
- F_TRANSLATION: Same as an address translation.
- F_WALK_EABT: Same as an address translation.
These are already implemented in the PTW logic, so no extra handling
required.
As in CD and TTBx translation context, the iova is not known, setting
the InputAddr was removed from "smmuv3_do_translate" and set after
from "smmuv3_translate" with the new function "smmuv3_fixup_event"
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-9-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, smmuv3_do_translate() will be used to translate the CD and the
TTBx, instead of re-writting the same logic to convert the returned
cached entry to an address, add a new macro CACHED_ENTRY_TO_ADDR.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASID and VMID used to be uint16_t in the translation config, however,
in other contexts they can be int as -1 in case of TLB invalidation,
to represent all (don’t care).
When stage-2 was added asid was set to -1 in stage-2 and vmid to -1
in stage-1 configs. However, that meant they were set as (65536),
this was not an issue as nesting was not supported and no
commands/lookup uses both.
With nesting, it’s critical to get this right as translation must be
tagged correctly with ASID/VMID, and with ASID=-1 meaning stage-2.
Represent ASID/VMID everywhere as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-7-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
smmuv3_translate() does everything from STE/CD parsing to TLB lookup
and PTW.
Soon, when nesting is supported, stage-1 data (tt, CD) needs to be
translated using stage-2.
Split smmuv3_translate() to 3 functions:
- smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW,
TLB insertion, all the functions are already there, this just puts
them together.
This also simplifies the code as it consolidates event generation
in case of TLB lookup permission failure or in TT selection.
- smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does
the event population in case of errors.
- smmuv3_translate(), now calls smmuv3_do_translate() for
translation while the rest is the same.
Also, add stage in trace_smmuv3_translate_success()
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-6-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, translation stage is represented as an int, where 1 is stage-1 and
2 is stage-2, when nested is added, 3 would be confusing to represent nesting,
so we use an enum instead.
While keeping the same values, this is useful for:
- Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is
stage-2 and both is nested.
- Tracing, as stage is printed as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20240715084519.1189624-5-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMMUv3 spec (ARM IHI 0070 F.b - 7.3 Event records) defines the
class of events faults as:
CLASS: The class of the operation that caused the fault:
- 0b00: CD, CD fetch.
- 0b01: TTD, Stage 1 translation table fetch.
- 0b10: IN, Input address
However, this value was not set and left as 0 which means CD and not
IN (0b10).
Another problem was that stage-2 class is considered IN not TT for
EABT, according to the spec:
Translation of an IPA after successful stage 1 translation (or,
in stage 2-only configuration, an input IPA)
- S2 == 1 (stage 2), CLASS == IN (Input to stage)
This would change soon when nested translations are supported.
While at it, add an enum for class as it would be used for nesting.
However, at the moment stage-1 and stage-2 use the same class values,
except for EABT.
Fixes: 9bde7f0674 “hw/arm/smmuv3: Implement translate callback”
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20240715084519.1189624-4-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the following events (ARM IHI 0070 F.b - 7.3 Event records):
- F_TRANSLATION
- F_ACCESS
- F_PERMISSION
- F_ADDR_SIZE
If fault occurs at stage 2, S2 == 1 and:
- If translating an IPA for a transaction (whether by input to
stage 2-only configuration, or after successful stage 1 translation),
CLASS == IN, and IPA is provided.
At the moment only CLASS == IN is used which indicates input
translation.
However, this was not implemented correctly, as for stage 2, the code
only sets the S2 bit but not the IPA.
This field has the same bits as FetchAddr in F_WALK_EABT which is
populated correctly, so we don’t change that.
The setting of this field should be done from the walker as the IPA address
wouldn't be known in case of nesting.
For stage 1, the spec says:
If fault occurs at stage 1, S2 == 0 and:
CLASS == IN, IPA is UNKNOWN.
So, no need to set it to for stage 1, as ptw_info is initialised by zero in
smmuv3_translate().
Fixes: e703f7076a “hw/arm/smmuv3: Add page table walk for stage-2”
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-3-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the SMMU architecture specification (ARM IHI 0070 F.b),
in “3.4 Address sizes”
The address output from the translation causes a stage 1 Address Size
fault if it exceeds the range of the effective IPA size for the given CD.
However, this check was missing.
There is already a similar check for stage-2 against effective PA.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-2-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is common practice when implementing double-buffering on VideoCore
to do so by multiplying the height of the virtual buffer by the
number of virtual screens desired (i.e., two - in the case of
double-bufferring).
At present, this won't work in QEMU because the logic in
fb_use_offsets require that both the virtual width and height exceed
their physical counterparts.
This appears to be unintentional/a typo and indeed the comment
states; "Experimentally, the hardware seems to do this only if the
viewport size is larger than the physical screen". The
viewport/virtual size would be larger than the physical size if
either virtual dimension were larger than their physical counterparts
and not necessarily both.
Signed-off-by: SamJakob <me@samjakob.com>
Message-id: 20240713160353.62410-1-me@samjakob.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit c1a1f80518 when we added the FEAT_LSE2 relaxations to
the alignment requirements for atomic and ordered loads and stores,
we didn't quite get it right for LDAPR/LDAPRH/LDAPRB with no
immediate offset. These instructions were handled in the old decoder
as part of disas_ldst_atomic(), but unlike all the other insns that
function decoded (LDADD, LDCLR, etc) these insns are "ordered", not
"atomic", so they should be using check_ordered_align() rather than
check_atomic_align(). Commit c1a1f80518 used
check_atomic_align() regardless for everything in
disas_ldst_atomic(). We then carried that incorrect check over in
the decodetree conversion, where LDAPR/LDAPRH/LDAPRB are now handled
by trans_LDAPR().
The effect is that when FEAT_LSE2 is implemented, these instructions
don't honour the SCTLR_ELx.nAA bit and will generate alignment
faults when they should not.
(The LDAPR insns with an immediate offset were in disas_ldst_ldapr_stlr()
and then in trans_LDAPR_i() and trans_STLR_i(), and have always used
the correct check_ordered_align().)
Use check_ordered_align() in trans_LDAPR().
Cc: qemu-stable@nongnu.org
Fixes: c1a1f80518 ("target/arm: Relax ordered/atomic alignment checks for LSE2")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-3-peter.maydell@linaro.org
When we converted the LDAPR/STLR instructions to decodetree we
accidentally introduced a regression where the offset is negative.
The 9-bit immediate field is signed, and the old hand decoder
correctly used sextract32() to get it out of the insn word,
but the ldapr_stlr_i pattern in the decode file used "imm:9"
instead of "imm:s9", so it treated the field as unsigned.
Fix the pattern to treat the field as a signed immediate.
Cc: qemu-stable@nongnu.org
Fixes: 2521b6073b ("target/arm: Convert LDAPR/STLR (imm) to decodetree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2419
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-2-peter.maydell@linaro.org
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
-----BEGIN PGP SIGNATURE-----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=pM6B
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.1
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
# gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
# DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
# uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
# YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
# Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
# SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
# W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
# Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
# lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
# 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
# NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
# =pM6B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits)
roms/opensbi: Update to v1.5
hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'
target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR
target/riscv: Expose the Smcntrpmf config
target/riscv: Do not setup pmu timer if OF is disabled
target/riscv: More accurately model priv mode filtering.
target/riscv: Start counters from both mhpmcounter and mcountinhibit
target/riscv: Enforce WARL behavior for scounteren/hcounteren
target/riscv: Save counter values during countinhibit update
target/riscv: Implement privilege mode filtering for cycle/instret
target/riscv: Only set INH fields if priv mode is available
target/riscv: Add cycle & instret privilege mode filtering support
target/riscv: Add cycle & instret privilege mode filtering definitions
target/riscv: Add cycle & instret privilege mode filtering properties
target/riscv: Fix the predicate functions for mhpmeventhX CSRs
target/riscv: Combine set_mode and set_virt functions.
target/riscv/kvm: update KVM regs to Linux 6.10-rc5
disas/riscv: Add decode for Zawrs extension
target/riscv: Validate the mode in write_vstvec
disas/riscv: Support zabha disassemble
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
correct name will result in validation fails when dumping the dtb and
using dt-validate.
But this change has a side-effect: every other firmware available that
is AIA capable is using 'riscv,delegate', and it will fault/misbehave if
this property isn't present. The property was added back in QEMU 7.0,
meaning we have 2 years of firmware development using the wrong
property.
Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows
older firmwares to keep booting with the 'virt' machine.
'riscv,delegate' is then marked for future deprecation with its use
being discouraged from now on.
Cc: Conor Dooley <conor@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Both CSRRS and CSRRC always read the addressed CSR and cause any read side
effects regardless of rs1 and rd fields. Note that if rs1 specifies a register
holding a zero value other than x0, the instruction will still attempt to write
the unmodified value back to the CSR and will cause any attendant side effects.
So if CSRRS or CSRRC tries to write a read-only CSR with rs1 which specifies
a register holding a zero value, an illegal instruction exception should be
raised.
Signed-off-by: Yu-Ming Chang <yumin686@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <172100444279.18077.6893072378718059541-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new config for Smcntrpmf extension so that it can be enabled/
disabled from the qemu commandline.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-13-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The timer is setup function is invoked in both hpmcounter
write and mcountinhibit write path. If the OF bit set, the
LCOFI interrupt is disabled. There is no benefitting in
setting up the qemu timer until LCOFI is cleared to indicate
that interrupts can be fired again.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-12-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In case of programmable counters configured to count inst/cycles
we often end-up with counter not incrementing at all from kernel's
perspective.
For example:
- Kernel configures hpm3 to count instructions and sets hpmcounter
to -10000 and all modes except U mode are inhibited.
- In QEMU we configure a timer to expire after ~10000 instructions.
- Problem is, it's often the case that kernel might not even schedule
Umode task and we hit the timer callback in QEMU.
- In the timer callback we inject the interrupt into kernel, kernel
runs the handler and reads hpmcounter3 value.
- Given QEMU maintains individual counters to count for each privilege
mode, and given umode never ran, the umode counter didn't increment
and QEMU returns same value as was programmed by the kernel when
starting the counter.
- Kernel checks for overflow using previous and current value of the
counter and reprograms the counter given there wasn't an overflow
as per the counter value. (Which itself is a problem. We have QEMU
telling kernel that counter3 overflowed but the counter value
returned by QEMU doesn't seem to reflect that.).
This change makes sure that timer is reprogrammed from the handler
if the counter didn't overflow based on the counter value.
Second, this change makes sure that whenever the counter is read,
it's value is updated to reflect the latest count.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-11-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently we start timer counter from write_mhpmcounter path only
without checking for mcountinhibit bit. This changes adds mcountinhibit
check and also programs the counter from write_mcountinhibit as well.
When a counter is stopped using mcountinhibit we simply update
the value of the counter based on current host ticks and save
it for future reads.
We don't need to disable running timer as pmu_timer_trigger_irq
will discard the interrupt if the counter has been inhibited.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-10-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
scounteren/hcountern are also WARL registers similar to mcountern.
Only set the bits for the available counters during the write to
preserve the WARL behavior.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-9-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, if a counter monitoring cycle/instret is stopped via
mcountinhibit we just update the state while the value is saved
during the next read. This is not accurate as the read may happen
many cycles after the counter is stopped. Ideally, the read should
return the value saved when the counter is stopped.
Thus, save the value of the counter during the inhibit update
operation and return that value during the read if corresponding bit
in mcountihibit is set.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-8-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privilege mode filtering can also be emulated for cycle/instret by
tracking host_ticks/icount during each privilege mode switch. This
patch implements that for both cycle/instret and mhpmcounters. The
first one requires Smcntrpmf while the other one requires Sscofpmf
to be enabled.
The cycle/instret are still computed using host ticks when icount
is not enabled. Otherwise, they are computed using raw icount which
is more accurate in icount mode.
Co-Developed-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-7-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the INH fields are set in mhpmevent uncoditionally
without checking if a particular priv mode is supported or not.
Suggested-by: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-6-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU only calculates dummy cycles and instructions, so there is no
actual means to stop the icount in QEMU. Hence this patch merely adds
the functionality of accessing the cfg registers, and cause no actual
effects on the counting of cycle and instret counters.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-5-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the definitions for ISA extension smcntrpmf.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-4-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the properties for ISA extension smcntrpmf. Patches
implementing it will follow.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-3-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mhpmeventhX CSRs are available for RV32. The predicate function
should check that first before checking sscofpmf extension.
Fixes: 1466448345 ("target/riscv: Add sscofpmf extension support")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-2-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Combining riscv_cpu_set_virt_enabled() and riscv_cpu_set_mode()
functions. This is to make complete mode change information
available through a single function.
This allows to easily differentiate between HS->VS, VS->HS
and VS->VS transitions when executing state update codes.
For example: One use-case which inspired this change is
to update mode-specific instruction and cycle counters
which requires information of both prev mode and current
mode.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-1-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Two new regs added: ztso and zacas.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709085431.455541-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
