this patch allows to fully use a tape device connected to qemu through
the scsi-generic interface.
Previous patch introduced tape SCSI commands management, this one
improve error case management:
- the SCSI controller command completion must be called with the status
value, not the sense value. In the case of scsi-generic, the SCSI status
is given by the field status of sg_io_hdr_t (the value is left shifted
by one regarding status codes defined in /usr/include/scsi/scsi.h)
- when a read is aborted due to a mark/EOF/EOD/EOM, the len reported to
controller can be 0. LSI controller emulation doesn't know how to manage
this. A workaround found is to call the completion routine with
SCSI_REASON_DONE just after calling it with SCSI_REASON_DATA with len=0.
This patch also manages correctly the block size of the tape device.
This patch has been tested with a real tape device "HP C5683A", linux
guest (debian etch) and tools like "mt", "tar" and "btape".
Windows guest is not better supported than before...
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5497 c046a42c-6fe2-441c-8c8c-71466251a162
With SVM the TLB supports tagging to distinguish TLB entries from
different virtual CPUs. This tag is called an ASID. The amount of ASIDs is
given in EBX of the SVM-CPUID-leaf. Currently we return 0, which might
break hypervisors. Let's better return something >0 here, say 0x10.
Since we're flushing the complete TLB on every VM entry and exit we're not
making use of the ASID information anyways.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5496 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a CPU definition for the Core Duo CPU. I tried to
resemble the original as closely as possible and document what features
are missing still. This patch enables the use of a recent CPU definition
on 32 bit platforms.
It also fixes two issues that went along the line:
- invalid xlevel in core2duo spec
While looking though the CPUIDs again, I found that xlevel is actually 8.
- non-PSE36 support
The CoreDuo CPUID does not expose the PSE36 capability, but CPUID
0x80000008 is tied to 36 bits. This broke Windows XP installation for
me, so I just set it to 32 bits width when PSE36 is not available. The
original CPU also exposes 32 bit width in CPUID 0x80000008.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5488 c046a42c-6fe2-441c-8c8c-71466251a162
O_DSYNC isn't available on OS X.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5486 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the cache= option to accept none, writeback, or writethough
to control the host page cache behavior. By default, writethrough caching is
now used which internally is implemented by using O_DSYNC to open the disk
images. When using -snapshot, writeback is used by default since data integrity
it not at all an issue.
cache=none has the same behavior as cache=off previously. The later syntax is
still supported by now deprecated. I also cleaned up the O_DIRECT
implementation to avoid many of the #ifdefs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5485 c046a42c-6fe2-441c-8c8c-71466251a162
glibc's structs dirent and dirent64 is different from in-kernel dirent
and dirent64. Kernel headers doesn't provide structs dirent(64) any
more. So we should add it to qemu headers.
To avoid conflict with glibc it called struct linux_dirent(64).
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5480 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a tcp protocol for live migration. It can be used as
follows:
qemu-system-x86_64 -hda ~/images/linux-test.img -monitor stdio
<vm runs for a while>
(qemu) migrate tcp:localhost:1025
On the same system:
qemu-system-x86_64 -hda ~/images/linux-test.img -incoming
tcp:localhost:1025
The monitor can be interacted with while waiting for an incoming live
migration.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5478 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds an ethernet announce function that will minimize downtime
when doing a live migration. This code originates from KVM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5477 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a command line parameter and monitor command for starting
a live migration. The next patch will provide an example of how to use these
parameters.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5476 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a buffered QEMUFile wrapper. This allows QEMUFile's to be
rate limited. It also makes it easier to implement a QEMUFile that is
asynchronous since the current QEMUFile API requires that all reads and writes
be synchronous.
The only real non-obvious part of the API is the "frozen" concept. If the
backend returns EAGAIN, the QEMUFile is said to be "frozen". This means no
additional output will be sent to the backend until the file is unfrozen.
qemu_file_put_notify can be used to unfreeze a frozen file.
A synchronous interface is also provided to wait for an unfreeze event. This is
used during the final part of live migration when the VM is no longer running.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5475 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows QEMUFile's read and write operations to return
negative error codes. This is necessary to detect things like closed
streams during live migration.
It also removes unused code for QEMUFileFD write path. Finally, it
makes sure to avoid attempting to flush an output buffer if the file
is only being used for input. This was spotted by Uri Lublin.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5474 c046a42c-6fe2-441c-8c8c-71466251a162
* target-sh/translate.c (gen_intermediate_code_internal): If
singlestep is enabled, update PC before stopping.
(Vladimir Prus)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5472 c046a42c-6fe2-441c-8c8c-71466251a162
The SH4 manual documents the swap.b instruction as follows:
SWAP.B Rm,Rn
Rm → swap lower 2 bytes → Rn
Current QEMU code, in addition to the above, also clears the high
16 bits. The immediate breakage I saw is that htonl function applied
to netmask of 255.255.255.0 gives 0, which breaks all networking.
(Vladimir Prus)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5471 c046a42c-6fe2-441c-8c8c-71466251a162
This was spotted by valgrind.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5470 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes configure check zlib devel files installed.
Current configure doesn't check that, so make will fail if they
are not installed.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5456 c046a42c-6fe2-441c-8c8c-71466251a162
The current flash emulation code advertises a write buffer size of 16
bytes (1 << 4, according to offset 0x2A of the CFI table). This is
very small compared to normal write buffer sizes, and makes the
process of writing to the flash very slow (at least from U-Boot).
This patch increases this size to 2048 bytes. Except the modification
of the CFI table, the only other required modification is to use
"value" instead of "cmd" to set pfl->counter, because cmd is truncated
to the 8 lower bits of value, while the number of bytes for a write
can now be greater than 255 bytes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5454 c046a42c-6fe2-441c-8c8c-71466251a162
The DIAGNOSE command in the qemu IDE implementation has an error when
use dfor packet devices.
The status register value is dependant on the drive being a packet
device or not, this patch corrects the returned status.
From the ATA/PI specification (V6 draft):
"If the device implements the PACKET command feature set, the device
SHALL clear bits 6,5,4,3,2 and 0 in the Status register to zero."
A selection of physical devices have been checked and do conform to
the specifications behaviour.
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5452 c046a42c-6fe2-441c-8c8c-71466251a162
Replace signalfd with signal handler/pipe. There is no way to interrupt
the CPU execution loop when a file descriptor becomes readable. This
results in a large performance regression in sparc emulation during
bootup.
This patch switches us to signal handler/pipe which was originally
suggested by Ian Jackson. The signal handler lets us interrupt the
CPU emulation loop while the write to a pipe lets us avoid the
select/signal race condition.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5451 c046a42c-6fe2-441c-8c8c-71466251a162
* Add partial support for the EXS (exception status) register.
* Update SPC after each singlestep exception.
* Remove special treatment of break 8.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5448 c046a42c-6fe2-441c-8c8c-71466251a162
