Support a following SPI flashes:
* mx66l51235f
* mt25ql512ab
Signed-off-by: Igor Kononenko <i.kononenko@yadro.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200811203724.20699-1-i.kononenko@yadro.com>
Message-Id: <20200819100956.2216690-22-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Provide a definition for the "25Hz reference clock input mode" strap
Signed-off-by: Igor Kononenko <i.kononenko@yadro.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200811203502.20382-1-i.kononenko@yadro.com>
Message-Id: <20200819100956.2216690-21-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This change works around the HW default values to be able to test the
Tacoma board with -kernel command line option. This was required when
we had both flash chips enabled in the device tree, otherwise Linux
would fail to probe the entire controller leaving it with no rootfs.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-20-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Changes in commit 533eb415df ("arm/aspeed: actually check RAM size")
introduced a 'valid_ram_sizes' array which can be used to compute the
associated bit field value encoding the RAM size. The field is simply
the index of the array.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-19-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
A subset of registers are not protected by the lock behaviour, so allow
unconditionally writing to those.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-18-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This allows qemu to run the "normal" power on reset boot path through
u-boot, where the DDR is trained.
An enhancement would be to have the SCU bit stick across qemu reboots,
but be unset on initial boot.
Proper modelling would be to discard all writes to the phy setting regs
at offset 0x100 - 0x400 and to model the phy status regs at offset
0x400.
The status regs model would only need to account for offets 0x00,
0x50, 0x68 and 0x7c.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: checkpatch fixes ]
Message-Id: <20200819100956.2216690-17-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The software reset of the MAC needs a finer granularity. Some settings
in MACCR are kept.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Fixes: bd44300d1a ("net: add FTGMAC100 support")
Message-Id: <20200819100956.2216690-16-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When inserting the VLAN tag in packets, memmove() can generate an
integer overflow for packets whose length is less than 12 bytes.
Move the VLAN insertion when the last segment of the frame is reached
and check length against the size of the ethernet header (14 bytes) to
avoid the crash. Return FTGMAC100_INT_XPKT_LOST status if the frame is
too small. This seems like a good modeling choice even if Aspeed does
not specify anything in that case.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Message-Id: <20200819100956.2216690-15-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
According to the Aspeed specs, no interrupts are raised in that case
but a "Tx-packets lost" status seems like a good modeling choice for
all implementations. It is covered by the Linux kernel.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-14-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The model uses today the "Normal priority transmit buffer unavailable"
interrupt status which it is not appropriate. According to the Aspeed
specs, no interrupts are raised in that case. An "AHB error" status
seems like a better modeling choice for all implementations since it
is covered by the Linux kernel.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-13-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
As we don't model the RX or TX FIFO, raise the "Packet moved to RX
FIFO" interrupt status bit as soon as we are handling a RX packet.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-12-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The second field of the TX descriptor has a set of flags to choose
when the transmit interrupt is raised : after the packet has been sent
on the ethernet or after it has been moved into the TX FIFO. But we
don't model that today.
Simply raise the "Packet transmitted on ethernet" interrupt status bit
as soon as the packet is sent by QEMU.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-11-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Receive Ring Base Address Register (RXR_BADR) and the Normal Priority
Transmit Receive Ring Base Address Register (NPTXR_BADR) can also be
read.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-10-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
BIT(0) of the ASPEED_SDHCI_INFO register is set by SW and polled until
the bit is cleared by HW.
Use the number of supported slots to define the default value of this
register (The AST2600 eMMC Controller only has one). Fix the reset
sequence by clearing automatically the RESET bit.
Cc: Eddie James <eajames@linux.ibm.com>
Fixes: 2bea128c3d ("hw/sd/aspeed_sdhci: New device")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The legacy controller only has one slave.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Unaligned access support is a leftover from the initial commit. There
is no such need on this device register mapping. Remove it.
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The BMC Firmware can be downloaded from :
https://www.supermicro.com/en/products/motherboard/X11SSL-F
Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Prettified Erik's name in email
Modified commit log ]
Message-Id: <20200715173418.186-1-erik.lucas.smit@gmail.com>
Message-Id: <20200819100956.2216690-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The read access size of the SCU registers can be 1/2/4 bytes and write
is 4 bytes and all Aspeed models would need a .valid.accepts() handler.
For the moment, set the min access size to 1 byte to cover both read
and write operations on the AST2400 but keep the min access size of
the other SoCs to 4 bytes as this is an unusual access size.
This fixes support for some old firmware doing 2 bytes reads on the
AST2400 SoC.
Reported-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The mx25l25635e returns the JEDEC ID twice when issuing a RDID command :
[ 2.512027] aspeed-smc 1e630000.spi: reading JEDEC ID C2:20:19:C2:20:19
This can break some firmware testing for this condition on the
supermicrox11-bmc machine.
Reported-by: Erik Smit <erik.lucas.smit@gmail.com>
Message-Id: <20200819100956.2216690-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Set the MVFR1 ID register FPHP and SIMDHP fields to indicate
that our "-cpu max" has v8.2-FP16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-46-peter.maydell@linaro.org
Convert the Neon floating-point VMUL, VMLA and VMLS to use gvec,
and use this to implement fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-45-peter.maydell@linaro.org
In the gvec helper functions for indexed operations, for AArch32
Neon the oprsz (total size of the vector) can be less than 16 bytes
if the operation is on a D reg. Since the inner loop in these
helpers always goes from 0 to segment, we must clamp it based
on oprsz to avoid processing a full 16 byte segment when asked to
handle an 8 byte wide vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-43-peter.maydell@linaro.org
Convert the Neon VRINTX insn to use gvec, and use this to implement
fp16 support for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-42-peter.maydell@linaro.org
Convert the Neon VRINT-with-specified-rounding-mode insns to gvec,
and use this to implement the fp16 versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-41-peter.maydell@linaro.org
Convert the Neon VCVT with-specified-rounding-mode instructions
to gvec, and use this to implement fp16 support for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-40-peter.maydell@linaro.org
Implement fp16 for the Neon VCVT insns which convert between
float and fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-39-peter.maydell@linaro.org
Convert the Neon VCVT float<->fixed-point insns to a
gvec style, in preparation for adding fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-38-peter.maydell@linaro.org
Convert the Neon float-integer VCVT insns to gvec, and use this
to implement fp16 support for them.
Note that unlike the VFP int<->fp16 VCVT insns we converted
earlier and which convert to/from a 32-bit integer, these
Neon insns convert to/from 16-bit integers. So we can use
the existing vfp conversion helpers for the f32<->u32/i32
case but need to provide our own for f16<->u16/i16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-37-peter.maydell@linaro.org
Convert the Neon pairwise fp ops to use a single gvic-style
helper to do the full operation instead of one helper call
for each 32-bit part. This allows us to use the same
framework to implement the fp16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-36-peter.maydell@linaro.org
Convert the Neon VRSQRTS insn to using a gvec helper,
and use this to implement the fp16 case.
As with VRECPS, we adjust the phrasing of the new implementation
slightly so that the fp32 version parallels the fp16 one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-35-peter.maydell@linaro.org
Convert the Neon VRECPS insn to using a gvec helper, and
use this to implement the fp16 case.
The phrasing of the new float32_recps_nf() is slightly different from
the old recps_f32() so that it parallels the f16 version; for f16 we
can't assume that flush-to-zero is always enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-34-peter.maydell@linaro.org
Convert the neon floating-point vector compare-vs-0 insns VCEQ0,
VCGT0, VCLE0, VCGE0 and VCLT0 to use a gvec helper, and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-33-peter.maydell@linaro.org
Convert the neon floating-point vector operations VFMA and VFMS
to use a gvec helper, and use this to implement the fp16 case.
This is the last use of do_3same_fp() so we can now delete
that function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-32-peter.maydell@linaro.org
Convert the Neon floating-point VMLA and VMLS insns over to using a
gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-31-peter.maydell@linaro.org
Convert the Neon floating point VMAXNM and VMINNM insns to
using a gvec helper and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-30-peter.maydell@linaro.org
Convert the Neon float-point VMAX and VMIN insns over to using
a gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-29-peter.maydell@linaro.org
Convert the neon floating-point vector absolute comparison ops
VACGE and VACGT over to using a gvec hepler and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-28-peter.maydell@linaro.org
Convert the Neon floating-point vector comparison ops VCEQ,
VCGE and VCGT over to using a gvec helper and use this to
implement the fp16 case.
(We put the float16_ceq() etc functions above the DO_2OP()
macro definition because later when we convert the
compare-against-zero instructions we'll want their
definitions to be visible at that point in the source file.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-27-peter.maydell@linaro.org
Rewrite Neon VABS/VNEG of floats to use gvec logical AND and XOR, so
that we can implement the fp16 version of the insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-26-peter.maydell@linaro.org
We already have gvec helpers for floating point VRECPE and
VRQSRTE, so convert the Neon decoder to use them and
add the fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-25-peter.maydell@linaro.org
Implement FP16 support for the Neon insns which use the DO_3S_FP_GVEC
macro: VADD, VSUB, VABD, VMUL.
For VABD this requires us to implement a new gvec_fabd_h helper
using the machinery we have already for the other helpers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-24-peter.maydell@linaro.org
Implement the VFP fp16 variant of VMOV that transfers a 16-bit
value between a general purpose register and a VFP register.
Note that Rt == 15 is UNPREDICTABLE; since this insn is v8 and later
only we have no need to replicate the old "updates CPSR.NZCV"
behaviour that the singleprec version of this insn does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-22-peter.maydell@linaro.org
The fp16 extension includes a new instruction VMOVX, which copies the
upper 16 bits of a 32-bit source VFP register into the lower 16
bits of the destination and zeroes the high half of the destination.
Implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-21-peter.maydell@linaro.org
The fp16 extension includes a new instruction VINS, which copies the
lower 16 bits of a 32-bit source VFP register into the upper 16 bits
of the destination. Implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-20-peter.maydell@linaro.org
Implement the fp16 version of the VFP VRINT* insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-19-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VSEL instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-18-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms
which convert between floating point and integer with a specified
rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-17-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms which
convert between floating point and fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-16-peter.maydell@linaro.org
