The cond_need_ext predicate was created while we still had a
32-bit compilation mode. It now makes more sense to treat D
as an absolute indicator of a 64-bit operation.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split do_unit_cond to do_unit_zero_cond to only handle conditions
versus zero. These are the only ones that are legal for UXOR.
Simplify trans_uxor accordingly.
Rename do_unit to do_unit_addsub, since xor has been split.
Properly compute carry-out bits for add and subtract, mirroring
the code in do_add and do_sub.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: b2167459ae ("target-hppa: Implement basic arithmetic")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With r1 as zero is by far the most common usage of UADDCM, as the
easiest way to invert a register. The compiler does occasionally
use the addition step as well, and we can simplify that to avoid
a temp and write directly into the destination.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The carry bits for each nibble N are located in bit (N+1)*4,
so the shift by 3 was off by one. Furthermore, the carry bit
for the most significant carry bit is indeed located in bit 64,
which is located in a different storage word.
Use a double-word shift-right to reassemble into a single word
and place them all at bit 0 of their respective nibbles.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: b2167459ae ("target-hppa: Implement basic arithmetic")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move it to cpu.h, so it can also be used in hppa_form_gva_psw().
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240324080945.991100-2-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Call translator_io_start before write to EIRR.
Move evaluation of EIRR vs EIEM to hppa_cpu_exec_interrupt.
Exit TB after write to EIEM, but otherwise use a straight store.
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The call to gen_helper_read_interval_timer is
identical on both sides of the IF.
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wide mode provides two more conditions, add them.
Fixes: 59963d8fdf ("target/hppa: Pass d to do_unit_cond")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240321184228.611897-1-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not clobber the high bits of the address by using a 32-bit deposit.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The return address comes from IA*Q_Next, and IASQ_Next
is always equal to IASQ_Back, not IASQ_Front.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
stdby,e,m was writing data from the wrong half of the register
into memory for cases 0-3.
Fixes: 25460fc5a7 ("target/hppa: Implement STDBY")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240319161921.487080-7-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
mfia should return only the iaoq bits without privilege
bits.
Fixes: 98a9cb792c ("target-hppa: Implement system and memory-management insns")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Message-Id: <20240319161921.487080-6-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the guest modifies the tb it is currently executing from,
it executes a fic instruction. Exit the tb on such instruction,
otherwise we might execute stale code.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20240319161921.487080-5-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid CPUArchState local variable when cpu_env() is used once.
Mechanical patch using the following Coccinelle spatch script:
@@
type CPUArchState;
identifier env;
expression cs;
@@
{
- CPUArchState *env = cpu_env(cs);
... when != env
- env
+ cpu_env(cs)
... when != env
}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When calculating the IOR for the exception handlers, the current
unwind_breg value is needed on 64-bit hppa machines.
Restore that value by calling cpu_restore_state() earlier, which in turn
calls hppa_restore_state_to_opc() which restores the unwind_breg for the
current instruction.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3824e0d643 ("target/hppa: Export function hppa_set_ior_and_isr()")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Unaligned 64-bit accesses were found in Linux to clobber carry bits,
resulting in bad results if an arithmetic operation involving a
carry bit was executed after an unaligned 64-bit operation.
hppa 2.0 defines additional carry bits in PSW register bits 32..39.
When restoring PSW after executing an unaligned instruction trap, those
bits were not cleared and ended up to be active all the time. Since there
are no bits other than the upper carry bits needed in the upper 32 bit of
env->psw and since those are stored in env->psw_cb, just clear the entire
upper 32 bit when storing psw to solve the problem unconditionally.
Fixes: 931adff314 ("target/hppa: Update cpu_hppa_get/put_psw for hppa64")
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
The BTLB helper function stores the BTLB info (four 32-bit ints) into
the memory of the guest. They are only available when emulating a 32-bit
CPU in the guest, so use "uint32_t" instead of "target_ulong" here.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
HP-UX 11 and HP ODE tools use the "rsm 0,%reg" instruction in not priviledged
code paths to get the current PSW flags. The constant 0 means that no bits of
the PSW shall be reset, so this is effectively a read-only access to the PSW.
Allow this read-only access even for not privileged code.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Add the do_transaction_failed() handler to tigger a HPMC to the CPU
in case of I/O transaction errors.
This is a preparation commit.
We still lack implementation for some registers, so do not yet enable sending
HPMCs. Having this hunk here now nevertheless helps for the further
development, so that it can easily be enabled later on.
Signed-off-by: Helge Deller <deller@gmx.de>
For debugging purposes at the early stage of the bootup process,
the SeaBIOS-hppa firmware sometimes needs to output characters to the
serial console. Note that the serial console is the default output
method for parisc machines.
At this stage PCI busses and other devices haven't been initialized
yet. So, SeaBIOS-hppa will not be able to find the correct I/O ports
for the serial ports yet.
Instead, add an emulation for the "diag 0x101" opcode to assist here.
Without any other dependencies, SeaBIOS-hppa can then load the character
to be printed in register %r26 and issue the diag assembly instruction.
The qemu diag_console_output() helper function will then print
that character to the first serial port.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QEMU coding style recommends using structure typedefs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes gen_intermediate_code() signature target agnostic so the function
can be called from accel/tcg/translate-all.c without target specifics.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-9-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
=FAMY
-----END PGP SIGNATURE-----
Merge tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa qemu v8.2 regression fixes
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
# X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
# nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
# =FAMY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 Jan 2024 05:57:17 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 15
target/hppa: Fix IOR and ISR on error in probe
target/hppa: Fix IOR and ISR on unaligned access trap
target/hppa: Export function hppa_set_ior_and_isr()
target/hppa: Avoid accessing %gr0 when raising exception
hw/hppa: Move software power button address back into PDC
target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
hw/hppa/machine: Disable default devices with --nodefaults option
hw/hppa/machine: Allow up to 3840 MB total memory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Put correct values (depending on CPU arch) into IOR and ISR on fault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Put correct values (depending on CPU arch) into IOR and ISR on fault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move functionality to set IOR and ISR on fault into own
function. This will be used by follow-up patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The value of unwind_breg may reference register %r0, but we need to avoid
accessing gr0 directly and use the value 0 instead.
At runtime I've seen unwind_breg being zero with the Linux kernel when
rfi is used to jump to smp_callin().
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bruno Haible <bruno@clisp.org>
Fix the address translation for PDC space on PA2.0 if PSW.W=0.
Basically, for any address in the 32-bit PDC range from 0xf0000000 to
0xf1000000 keep the lower 32-bits and just set the upper 32-bits to
0xfffffff0.
This mapping fixes the emulated power button in PDC space for 32- and
64-bit machines and is how the physical C3700 machine seems to map
PDC.
Figures H-10 and H-11 in the parisc2.0 spec [1] show that the 32-bit
region will be mapped somewhere into a higher and bigger 64-bit PDC
space. The start and end of this 64-bit space is defined by the
physical address bits. But the figures don't specifiy where exactly the
mapping will start inside that region. Tests on a real HP C3700
regarding the address of the power button indicate, that the lower
32-bits will stay the same though.
[1] https://parisc.wiki.kernel.org/images-parisc/7/73/Parisc2.0.pdf
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No changes in the output from the following command.
[gshan@gshan q]$ ./build/qemu-system-hppa -cpu ?
Available CPUs:
hppa
hppa64
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231114235628.534334-13-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
For all targets, the CPU class returned from CPUClass::class_by_name()
and object_class_dynamic_cast(oc, CPU_RESOLVING_TYPE) need to be
compatible. Lets apply the check in cpu_class_by_name() for once,
instead of having the check in CPUClass::class_by_name() for individual
target.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-ID: <20231114235628.534334-4-gshan@redhat.com>
Since commit 3a9d0d7b64 ("hw/cpu: Call object_class_is_abstract()
once in cpu_class_by_name()"), there is no need to check if @oc is
abstract because it has been covered by cpu_class_by_name().
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114235628.534334-3-gshan@redhat.com>
[PMD: Mention commit 3a9d0d7b64]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Two patches for 8.2.
The SHRPD patch fixes a real translation bug which then allows to boot
the 64-bit Linux kernels of the Debian-11 and Debian-12 installation CDs.
The second patch adds the instruction byte sequence to the
assembly log. This is not an actual bug fix, but it's important since
it helps a lot when trying to fix qemu translation bugs on hppa.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVfHPwAKCRD3ErUQojoP
X3TrAQD2SfFsTWIYqTamh1ZHmydaJRL1xhXmPMqXgXFkDmiyhQD/VeyIyWEGj5Oe
x70WR8HrtkadsUddgSGzFRChaVb0/wI=
=Sapq
-----END PGP SIGNATURE-----
Merge tag 'hppa64-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
HPPA64-PATCHES-for-8.2
Two patches for 8.2.
The SHRPD patch fixes a real translation bug which then allows to boot
the 64-bit Linux kernels of the Debian-11 and Debian-12 installation CDs.
The second patch adds the instruction byte sequence to the
assembly log. This is not an actual bug fix, but it's important since
it helps a lot when trying to fix qemu translation bugs on hppa.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVfHPwAKCRD3ErUQojoP
# X3TrAQD2SfFsTWIYqTamh1ZHmydaJRL1xhXmPMqXgXFkDmiyhQD/VeyIyWEGj5Oe
# x70WR8HrtkadsUddgSGzFRChaVb0/wI=
# =Sapq
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Nov 2023 15:04:15 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
disas/hppa: Show hexcode of instruction along with disassembly
target/hppa: Fix 64-bit SHRPD instruction
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When shifting the two joined 64-bit registers right, shift the upper
64-bit register to the left and the lower 64-bit register to the right
before merging them with OR.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: bb67ec32a0 "target/hppa: Include PSW_P in tb flags and mmu index"
Fixes: d7553f3591 "target/hppa: Populate an interval tree with valid tlb entries"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is the value that is supported by both PA-8500 and Astro.
If we support a larger address space than expected, we trip up
software that did not fill in all of the page table bits,
expecting them to be ignored.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Align the language with pa2.0, separating absolute and physical.
The translation from absolute to physical depends on PSW.W, and
we prefer not to flush between changes, therefore use 2 mmu_idx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce the number of direct checks against MMU_PHYS_IDX.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
