Correct some confusion wrt. the PCI facing
side of the PCI host bridge (not PCIe root complex).
The ref. manual for the mpc8533 (as well as
mpc8540 and mpc8540) give the class code as
PCI_CLASS_PROCESSOR_POWERPC.
While the PCI_HEADER_TYPE field is oddly omitted,
the tables in the "PCI Configuration Header"
section shows a type 0 layout using all 6 BAR
registers (as 2x 32, and 2x 64 bit regions)
So 997505065d
seems to be in error. Although there was
perhaps some confusion as the mpc8533
has a separate PCIe root complex.
With PCIe, a root complex has PCI_HEADER_TYPE=1.
Neither the PCI host bridge, nor the PCIe
root complex advertise class PCI_CLASS_BRIDGE_PCI.
This was confusing Linux guests, which try
to interpret the host bridge as a pci-pci
bridge, but get confused and re-enumerate
the bus when the primary/secondary/subordinate
bus registers don't have valid values.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.
Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus()
are misleadingly named. They're not used for initializing *any* PCI bus,
but only for a root PCI bus.
Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead
created with a direct qbus_create_inplace() (see pci_bridge_initfn()).
This patch renames the functions to make it clear they're only used for
a root bus.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Currently there is no MMIO range over 4G
reserved for PCI hotplug. Since the 32bit PCI hole
depends on the number of cold-plugged PCI devices
and other factors, it is very possible is too small
to hotplug PCI devices with large BARs.
Fix it by reserving 2G for I4400FX chipset
in order to comply with older Win32 Guest OSes
and 32G for Q35 chipset.
Even if the new defaults of pci-hole64-size will appear in
"info qtree" also for older machines, the property was
not implemented so no changes will be visible to guests.
Note this is a regression since prev QEMU versions had
some range reserved for 64bit PCI hotplug.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We exposed gpex_set_irq_num() for machines to set the INTx to
GSI routing. However if the machine forgets to call that
function we currently do not check the association was properly
done. Let's initialize gsi values to -1 and if this value is
found in gpex_route_intx_pin_to_irq, set the routing mode as
disabled.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1508776211-22175-1-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch updates the sun4u model to being much closer to a real Ultra 5
by moving devices behind the 2 simba PCI bridges (A and B) as found on real
hardware.
The most noticeable change introduced by this patchset is that in-built devices
are no longer attached to the PCI root bus, but instead behind PCI bridge A.
Along with this the interrupt routing is updated accordingly to match the
official documentation.
Since the existing code currently bypasses the PCI bridge interrupt
swizzling, the interrupt mapping functions are reorganised so that
pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is
used by the PCI host bridge.
Behind the sabre PCI host bridge, the PCI IO space now needs to be
split into two separate halves at 0x8000000. Therefore we also setup a new
PCI IO space region of increased size on the PCI host bridge and enable
32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI
bridge B correctly.
As part of this change we also combine the onboard sunhme NIC and the ebus
into a single multi-function device as done on a real Ultra 5. For other
NICs the existing behaviour is preserved, i.e. we initialise them and
place them into the next free slot on PCI bus B.
Finally we mark the physically unavailable slots (plus slot 0 in busA) as
reserved to ensure that users can't plug devices into non-existent slots
which will break interrupt routing.
Note: since this commit changes PCI topology and interrupt routing, an
updated openbios-sparc64 binary is included with this commit containing the
associated changes to maintain bisectability.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Change all devices that set is_express=1 to implement
INTERFACE_PCIE_DEVICE.
Cc: Keith Busch <keith.busch@intel.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: qemu-block@nongnu.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now we are able to retrieve the gsi from the INTx pin, let's
enable intx_to_irq routing. From that point on, irqfd becomes
usable along with INTx when assigning a PCIe device.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Feng Kan <fkan@apm.com>
Message-id: 1505296004-6798-4-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To implement INTx to gsi routing we need to pass the gpex host
bridge the gsi associated to each INTx index. Let's introduce
irq_num array and gpex_set_irq_num setter function.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Feng Kan <fkan@apm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1505296004-6798-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As future sun4u PCI topologies place the ebus containing the in-built devices
behind a PCI bridge, add a busA property to the PBM PCI bridge that is then
used to allow IO accesses by default.
This allows early fw_cfg/NVRAM/serial access to occur even before OpenBIOS
has had a chance to configure the PCI bridges.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Rather than referring to the PCI busses as bus2 and bus3, refer to them as
busA and busB as per the documentation. Also replace the long bus names with
the shorter pciA and pciB aliases (to make it easier to attach additional
devices to either from the command line).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
This finishes QOM'fication of IOMMUMemoryRegion by introducing
a IOMMUMemoryRegionClass. This also provides a fastpath analog for
IOMMU_MEMORY_REGION_GET_CLASS().
This makes IOMMUMemoryRegion an abstract class.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170711035620.4232-3-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion
as a parent.
This moves IOMMU-related fields from MR to IOMMU MR. However to avoid
dymanic QOM casting in fast path (address_space_translate, etc),
this adds an @is_iommu boolean flag to MR and provides new helper to
do simple cast to IOMMU MR - memory_region_get_iommu. The flag
is set in the instance init callback. This defines
memory_region_is_iommu as memory_region_get_iommu()!=NULL.
This switches MemoryRegion to IOMMUMemoryRegion in most places except
the ones where MemoryRegion may be an alias.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170711035620.4232-2-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZSRWrAAoJEDhwtADrkYZTVOQP/RK8br2A1Cn7LeVG6jnKz5hJ
OqyII77x8I2RachWvnwxQeHPMEVDuz3y2WjL+80s6peXlpR6y/13w7oX0f6aiJuo
+T9khTqMv2I7HsM5UCsXAJpFPHT7r90b4x8nstY80YLGe7lA7L6yk6PGyCxHThwA
mOiTKDw6/Xb/yZGrS2Favrun7juNpAs0Ec1IAkaA8xsEgVkd6tDv281rmHqvibl/
//90VfJp3nHFZ12FCQ1HzA42Eigtmo/fIk9LnAzBoYG0zw0cnzjuv0BNzs/JwuUZ
/VskeD1cViQ4yzFnPpjOavjYjTN854/JTJzm7gZ7dTQ6/l3ykoY6NDE8p1BLuHlC
p2RKkg20EeZlpOEtMQ4g6iyG6EUxaKcEiXmQ31LqN/LJwxTYbo5B5nCHMjrt4gxe
MqFBJQSNsJ7QjZ7Qa7pADMCi/G0m7/0dN8vBqSr4vcbLVvdbw/yb/9s33wXGrUj1
PyXM2ymi+vvSqcXtNXKshsJLxJSJxO1tm2tRIANDTabQ00yxs8dOYnQnbQFR94fp
6nrE2PnjZqgqk69aNDJEbngj6Tgx44nyTr1+Q17juZf9nTCE5QmBE1J0IRoykCJn
E8+T63ZxtIxVV2yLi5xBjmZaZtPyJRGGeUXunA10SuWrHzupEcBuhFhFYd2MFM5L
fsojALN2K3Gdx2+CmAo2
=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Based on the underlying type of the data accessed, use the appropriate
getters/setters:
* AcpiPmInfo members s3_disabled, s4_disabled are bool, member s4_val is
an uint8_t
* Property ACPI_PCIHP_IO_PROP is defined with
object_property_add_uint32_ptr()
* Property PCIE_HOST_MCFG_SIZE is implemented with visit_type_uint64()
* PCIDevice property "addr" is backed by PCIDevice member devfn, which
is an int32_t
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-20-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[More verbose commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the actual unsigned integer type name.
The type name change impacts the following externally visible area:
* vl.c's machine_help_func() puts it in help for -machine NAME,help.
* QMP command qom-list exposes it in ObjectPropertyInfo member @type.
* QMP command device-list-properties exposes it in DevicePropertyInfo
member @type.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
e->size is hwaddr, i.e. uint64_t. We silently truncate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The q35 machine type currently lets the guest firmware select a 1MB, 2MB
or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even
that is not enough when a lot of VCPUs (more than approx. 224) are
configured -- SMRAM footprint scales largely proportionally with VCPU
count.
Introduce a new property for "mch" called "extended-tseg-mbytes", which
expresses (in megabytes) the user's choice of TSEG (SMRAM) size.
Invent a new, QEMU-specific register in the config space of the DRAM
Controller, at offset 0x50, in order to allow guest firmware to query the
TSEG (SMRAM) size.
According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller
Register Address Map (D0:F0)":
Warning: Address locations that are not listed are considered Intel
Reserved registers locations. Reads to Reserved registers may
return non-zero values. Writes to reserved locations may
cause system failures.
All registers that are defined in the PCI 2.3 specification,
but are not necessary or implemented in this component are
simply not included in this document. The
reserved/unimplemented space in the PCI configuration header
space is not documented as such in this summary.
Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part
of the standard PCI config space header. And they precede the capability
list as well, which starts at 0xe0 for this device.
When the guest writes value 0xffff to this register, the value that can be
read back is that of "mch.extended-tseg-mbytes" -- unless it remains
0xffff. The guest is required to write 0xffff first (as opposed to a
read-only register) because PCI config space is generally not cleared on
QEMU reset, and after S3 resume or reboot, new guest firmware running on
old QEMU could read a guest OS-injected value from this register.
After reading the available "extended" TSEG size, the guest firmware may
actually request that TSEG size by writing pattern 11b to the ESMRAMC
register's TSEG_SZ bit-field. (The Intel spec referenced above defines
only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.)
On the QEMU command line, the value can be set with
-global mch.extended-tseg-mbytes=N
The default value for 2.10+ q35 machine types is 16. The value is limited
to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be
stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users
are responsible for choosing sensible TSEG sizes.
On 2.9 and earlier q35 machine types, the default value is 0. This lets
the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50,
keep their original behavior.
When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is
set to that value on reset, for completeness.
PCI config space is migrated automatically, so no VMSD changes are
necessary.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1447027
Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2bwAAoJECgfDbjSjVRpNBgIALmNG7VaixhNUlnfX1n1JBnh
+HBP2zNfvi0q5roBuPFmlziKa3IBHb2Fcte4nb6QxmPg+uoaj39AOzfrrvz210kR
h2j5Qk2bCdMeWBpxI+xDDScwi/Im23Y6KN1eZyMekFr2CaSGiqOHZPPdbsyEcHPB
VylM0uHqSTZL5JAAzEuYlH+LLfPu91HoxMsIAdNuQX+qKyM2DZ4eICBQ0zA73USt
OduZltcRMk7UpvQMqY+2iaEXapXQQEUGrP2Mo8ZyqeIl2ItC33GspqBQIKjuZdrr
tpr/T1VWsLdZnURZXyELrFqrErDXvKaP9HROwvyLyYPXZF+pJ3LA7TopS5UmfNQ=
=Z4xG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 May 2017 01:10:24 AM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
acpi-test: update expected files
pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry
vhost-user: pass message as a pointer to process_message_reply()
virtio_net: Bypass backends for MTU feature negotiation
intel_iommu: turn off pt before 2.9
intel_iommu: support passthrough (PT)
intel_iommu: allow dev-iotlb context entry conditionally
intel_iommu: use IOMMU_ACCESS_FLAG()
intel_iommu: provide vtd_ce_get_type()
intel_iommu: renaming context entry helpers
x86-iommu: use DeviceClass properties
memory: remove the last param in memory_region_iommu_replay()
memory: tune last param of iommu_ops.translate()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch converts the old "is_write" bool into IOMMUAccessFlags. The
difference is that "is_write" can only express either read/write, but
sometimes what we really want is "none" here (neither read nor write).
Replay is an good example - during replay, we should not check any RW
permission bits since thats not an actual IO at all.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.
When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.
Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.
Except for code comments, changes were generated using the
following Coccinelle patch:
@@
expression DC;
@@
(
-DC->cannot_instantiate_with_device_add_yet = false;
+DC->user_creatable = true;
|
-DC->cannot_instantiate_with_device_add_yet = true;
+DC->user_creatable = false;
)
@@
typedef ObjectClass;
expression dc;
identifier class, data;
@@
static void device_class_init(ObjectClass *class, void *data)
{
...
dc->hotpluggable = true;
+dc->user_creatable = true;
...
}
@@
@@
struct DeviceClass {
...
-bool cannot_instantiate_with_device_add_yet;
+bool user_creatable;
...
}
@@
expression DC;
@@
(
-!DC->cannot_instantiate_with_device_add_yet
+DC->user_creatable
|
-DC->cannot_instantiate_with_device_add_yet
+!DC->user_creatable
)
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This adds a clarifying comment and build time assert to the FADT reset register field initialisation: the reset register is the same on both machine types.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1489558827-28971-3-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cannot_destroy_with_object_finalize_yet was added by 4c315c2
("qdev: Protect device-list-properties against broken devices")
because "realview_pci" and "versatile_pci" were hanging
during "device-list-properties" cleanup (an infinite loop in
bus_unparent()).
We have this problem because the child is not removed from
the list of the PCI bus children because it has no defined parent:
qdev_set_parent_bus() set the device parent_bus pointer to bus, and
adds the device in the bus children list, but doesn't update the
device parent pointer.
To fix the problem, move all the involved parts to the realize function.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170414083717.13641-4-lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bsJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' into staging
ppc patch queue for 2017-02-22
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
# gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits)
hw/ppc/ppc405_uc.c: Avoid integer overflows
hw/ppc/spapr: Check for valid page size when hot plugging memory
target-ppc: fix Book-E TLB matching
hw/net/spapr_llan: 6 byte mac address device tree entry
machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag
machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks
spapr: reuse machine->possible_cpus instead of cores[]
change CPUArchId.cpu type to Object*
pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object
pc: calculate topology only once when possible_cpus is initialised
pc: move pcms->possible_cpus init out of pc_cpus_init()
machine: move possible_cpus to MachineState
hw/pci-host/prep: Do not use hw_error() in realize function
target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv
target/ppc/POWER9: Adapt LPCR handling for POWER9
target/ppc/POWER9: Add ISAv3.00 MMU definition
target/ppc: Fix LPCR DPFD mask define
target-ppc: Add xscvqpudz and xscvqpuwz instructions
target-ppc: Implement round to odd variants of quad FP instructions
softfloat: Add float128_to_uint32_round_to_zero()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw_error() is for CPU related errors only (it prints out a
register dump and calls abort()), so we should not use it
if we just failed to load the bios image. Apart from that,
realize() functions should not exit directly but always set
the errp with error_setg() in case of errors instead.
Additionally, move some code around and delete the bios memory
subregion again in case of such an error, so that we leave a
clean state when returning to the caller.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for emulating the Xilinx AXI Root Port Bridge for PCI
Express as described by Xilinx' PG055 document. This is a PCIe
controller that can be used with certain series of Xilinx FPGAs, and is
used on the MIPS Boston board which will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
removed returning on !level,
updated IRQ connection with GPIO logic,
moved xilinx_pcie_init() to boston.c
replaced stw_le_p() with pci_set_word()
and other cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
It's currently broken as it uses an incorrect shift, it tries
to use the slot number but uses the top bits of the bus number
instead.
Note: Neither implementation matches what OpenBIOS ends up putting
in the device-tree either, which will have to be fixed separately.
This is not quite correct for modelling a real Mac since Apple
tend to tie all 4 interrupt lines of a slot together and have
separate interrupts for every slot and every motherboard devices
going straight to the PIC but we'll sort that out later.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert a device model where initialization obviously can't fail,
make it implement realize() rather than init().
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
'Realize' the PCI root bus manually since the 'realize' mechanism
does not propagate to child devices yet.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
'Realize' the PCI root bus manually since the 'realize' mechanism
does not propagate to child devices yet.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Delay the host-bridge 'realization' until the
PCI root bus is attached.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Create and connect the PCI root bus to the
host bridge before the later is 'realized'.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Users of struct Range mess liberally with its members, which makes
refactoring hard. Create a set of methods, and convert all users to
call them instead of accessing members. The methods have carefully
worded contracts, and use assertions to check them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and
w64 is the PCI64 hole.
Three users:
* I440FXState and MCHPCIState have a member PcPciInfo pci_info, but
only pci_info.w32 is actually used. This is confusing. Replace by
Range pci_hole.
* acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes
from acpi_get_pci_info() to build_dsdt(). Replace by two variables
Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to
acpi_get_pci_holes().
PcPciInfo is now unused; drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Range pci_info.w32 records the location of the PCI hole.
It's initialized to empty when QOM zeroes I440FXState. That's a fine
value for a still unknown PCI hole.
i440fx_init() sets pci_info.w32.begin = below_4g_mem_size. Changes
the PCI hole from empty to [below_4g_mem_size, UINT64_MAX]. That's a
bogus value.
i440fx_pcihost_initfn() sets pci_info.end = IO_APIC_DEFAULT_ADDRESS.
Since i440fx_init() ran already, this changes the PCI hole to
[below_4g_mem_size, IO_APIC_DEFAULT_ADDRESS-1]. That's the correct
value.
Setting the bounds of the PCI hole in two separate places is
confusing, and begs the question whether the bogus intermediate value
could be used by something, or what would happen if we somehow managed
to realize an i440FX device without having run the board init function
i440fx_init() first.
Avoid the confusion by setting the (constant) upper bound along with
the lower bound in i440fx_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Since iommu devices can be created with '-device' there is
no need to keep iommu as machine and mch property.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the standard '-device intel-iommu' to create the IOMMU device.
The legacy '-machine,iommu=on' can still be used.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow adding sysbus devices with -device on Q35.
At first Q35 will support only intel-iommu to be added this way,
however the command line will support all sysbus devices.
Mark with 'cannot_instantiate_with_device_add_yet' the ones
causing immediate problems (e.g. crashes).
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During creation of Q35 instance several parameters are set using direct access.
It violates Qemu device model. Correctly, the parameters should be handled as
object properties.
The patch adds four link type properties for fields:
mch.ram_memory
mch.pci_address_space
mch.system_memory
mch.address_space_io
And, it adds two size type properties for fields:
mch.below_4g_mem_size
mch.above_4g_mem_size
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some CPUs are of an opposite data-endianness to other components in the
system. Sometimes elfs have the data sections layed out with this CPU
data-endianness accounting for when loaded via the CPU, so byte swaps
(relative to other system components) will occur.
The leading example, is ARM's BE32 mode, which is is basically LE with
address manipulation on half-word and byte accesses to access the
hw/byte reversed address. This means that word data is invariant
across LE and BE32. This also means that instructions are still LE.
The expectation is that the elf will be loaded via the CPU in this
endianness scheme, which means the data in the elf is reversed at
compile time.
As QEMU loads via the system memory directly, rather than the CPU, we
need a mechanism to reverse elf data endianness to implement this
possibility.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes all over the place.
New tests for pxe.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWxedfAAoJECgfDbjSjVRp9ZoH/1zlxDy/iiJWXJI0jkcnbSof
/tFbchrj/hfz0/Wr0yeKJNdU1rMgiY0lYM1F5Pp4MQDHFoFM6i7LaLUYLQq92u+w
CpgTOMXwthOqn94yrBncKUN+OkB4vDW18sHd21rTh5n1oO9VjM4oQFSHpAtaDdnc
7dyryrlocBlgjARuOhW7A3KJAdPcKUer5JKdbWMDHw2wgwk1+7lx8ip7PBrFpMwW
PEEw2jo/lQw/rm/Kit+BV43NBy5pks2/jWmaXqH5jgCNixEmbY150dJLLW6lAqdh
xatnMxkQHpbEyf/Cy8M73v8vdOLjfQNdJ7GO0lc3CZw4bZBHbOcuzVEExvHewYw=
=vpiH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pxe
Fixes all over the place.
New tests for pxe.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 18 Feb 2016 15:46:39 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
tests/vhost-user-bridge: add scattering of incoming packets
vhost-user interrupt management fixes
rules: filter out irrelevant files
change type of pci_bridge_initfn() to void
dec: convert to realize()
tests: add pxe e1000 and virtio-pci tests
msix: fix msix_vector_masked
virtio: optimize virtio_access_is_big_endian() for little-endian targets
vhost: simplify vhost_needs_vring_endian()
vhost: move virtio 1.0 check to cross-endian helper
virtio: move cross-endian helper to vhost
vhost-net: revert support of cross-endian vnet headers
virtio-net: use the backend cross-endian capabilities
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since it can`t fail. Also modify the callers.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Darwin/OS X use the undocumented kMacRISCPCIAddressSelect (0x48) to
configure PCI memory space size for mac99 machines. Without this
register, warnings similar to below are emitted to the console during boot:
AppleMacRiscPCI: bad range 2(80000000:01000000)
AppleMacRiscPCI: bad range 2(81000000:00001000)
AppleMacRiscPCI: bad range 2(81080000:00080000)
Based upon the algorithm in Darwin's AppleMacRiscPCI.cpp driver, set the
kMacRISCPCIAddressSelect register so that Darwin considers the PCI
memory space to be at 0x80000000 (size 0x10000000) which matches that
currently used by QEMU and OpenBIOS.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[commit message and comment revised as suggested by Mark Cave-Ayland]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
We can have at most one ISA bus. If you try to create another one,
isa_bus_new() complains to stderr and returns null.
isa_bus_new() is called in two contexts, machine's init() and device's
realize() methods. Since complaining to stderr is not proper in the
latter context, convert isa_bus_new() to Error.
Machine's init():
* mips_jazz_init(), called from the init() methods of machines
"magnum" and "pica"
* mips_r4k_init(), the init() method of machine "mips"
* pc_init1() called from the init() methods of non-q35 PC machines
* typhoon_init(), called from clipper_init(), the init() method of
machine "clipper"
These callers always create the first ISA bus, hence isa_bus_new()
can't fail. Simply pass &error_abort.
Device's realize():
* i82378_realize(), of PCI device "i82378"
* ich9_lpc_realize(), of PCI device "ICH9-LPC"
* pci_ebus_realize(), of PCI device "ebus"
* piix3_realize(), of PCI device "pci-piix3", abstract parent of
"PIIX3" and "PIIX3-xen"
* piix4_realize(), of PCI device "PIIX4"
* vt82c686b_realize(), of PCI device "VT82C686B"
Propagate the error. Note that these devices are typically created
only by machine init() methods with qdev_init_nofail() or similar. If
we screwed up and created an ISA bus before that call, we now give up
right away. Before, we'd hobble on, and typically die in
isa_bus_irqs(). Similar if someone finds a way to hot-plug one of
these critters.
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
Device realize() methods aren't supposed to call hw_error(), they
should set an error and fail cleanly. Blindly doing that would be
easy enough, but then realize() would fail without undoing its side
effects. Just mark it FIXME for now.
Cc: "Andreas Färber" <andreas.faerber@web.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-6-git-send-email-armbru@redhat.com>
Fix the bug introduced by 595a4f07: function host_pci_config_read() should be
pass-by-reference, not value.
This probably means this function never worked for anyone.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There's no indication of any sort that i440fx doesn't support
"iommu=on"
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
The helper function machine_iommu() isn't necesary. We can
directly check for the property.
Signed-off-by: Bandan Das <bsd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Uninorth is the mac99 PCI host controller, so add
it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Grackle is the PCI host controller of oldworld powermac,
so add it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
config_fd should be closed before return, or there will
be a resource leak error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
- Use a hash table indexed on bus pointers to store information about buses
instead of using the bus numbers.
Bus pointers are stored in a new VTDBus struct together with the vector
of device address space pointers indexed by devfn.
- The bus number is still used for lookup for selective SID based invalidate,
in which case the bus number is lazily resolved from the bus hash table and
cached in a separate index.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.
This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties. Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1. Example reproducer:
$ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
Aborted (core dumped)
[Exit 134 (SIGABRT)]
Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:
* Hang during cleanup (didn't debug, so I can't say why):
"realview_pci", "versatile_pci".
* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
"fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
CPUs
* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
"host-powerpc64-cpu", "host-embedded-powerpc-cpu",
"host-powerpc-cpu" (the powerpc ones can't currently reach the
assertion, because the CPUs are only registered when KVM is enabled,
but the assertion is arguably in the wrong place all the same)
Make qmp_device_list_properties() fail cleanly when the device is so
marked. This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails". Not a complete fix, just
a better-than-nothing work-around. In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".
This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2. Example reproducer:
$ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help
Before:
qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
After:
Can't list properties of device 'pxa2xx-pcmcia'
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
There is a bug in the register mask when reading
the ATMUs registers. As the result some registers
cannot be read, and read is aliased to the other
registers. Fix it.
Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Implement a pci host bridge specific to passthrough. Actually
this just inherits the standard one. And we also just expose
a minimal real host bridge pci configuration subset.
[Replace pread with lseek and read to fix Windows build]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
IGD passthrough wants to supply a different pci and
host devices, inheriting i440fx devices. Make types
configurable.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changes:
* mips32r5-generic CPU updated and renamed to P5600
* improvements in LWL/LDL, logging and fulong2e
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJVzMGTAAoJEFIRjjwLKdprClUH/2col9J1MIoYm+8Ac8Q5hBd5
Bpg1HvWql8ecx29z9bhDNkitXATaMkwho05aEl0xkYzjhKMvjs2ayTuko35ryOY6
KRSONpndvfJLDCaxdrQcvKG9DXmhSPIy2TZLv0Jpl0dfhPXm0LPxv3WQ/s8YZJa7
e2bGmUNLyloySMEmq7T55U4FCB/eyzzLBreCR4miOxU+KBKSAQyZBB9dcCj52sCM
qA8OtaQZdKXUYvqwd+mRpCUjvqhrfFmMSV/A0VclXHCxb9lX63HY1c7X6bHzNyoP
YWwCJLadQsYMUl4ajF+phUrWu6mjRgpcpQKSYiX8+u2gdcbVY6TeyzjYfsczLf8=
=Owqn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150813' into staging
MIPS patches 2015-08-13
Changes:
* mips32r5-generic CPU updated and renamed to P5600
* improvements in LWL/LDL, logging and fulong2e
# gpg: Signature made Thu 13 Aug 2015 17:10:59 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B
* remotes/lalrae/tags/mips-20150813:
target-mips: Use CPU_LOG_INT for logging related to interrupts
hw/pci-host/bonito: Avoid buffer overrun for bad LDMA/COP accesses
target-mips: simplify LWL/LDL mask generation
target-mips: update mips32r5-generic into P5600
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The LDMA and COP memory regions represent four 32 bit registers
each, but the memory regions themselves are 0x100 bytes large.
Add guards to the read and write accessors so that bogus accesses
beyond the four defined registers don't just run off the end of
the bonldma and boncop structs and into whatever lies beyond.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The existing i440fx initialization code sets a PCI config register that
isn't documented anywhere in the Intel 440FX datasheet. Register 0x57 is
DRAMC (DRAM Control) and has nothing to do with the RAM size.
This was implemented in commit ec5f92ce6a
because old coreboot code tried to read registers 0x5a-0x5f,0x56,0x57 to
get the RAM size from QEMU, but I couldn't find out why coreboot did
that. I assume it was a mistake, and the original code was supposed to
be reading the DRB[0-7] registers (offsets 0x60-0x67).
Document that coreboot-specific register offset in a macro and a
comment, for future reference.
Cc: Ed Swierk <eswierk@skyportsystems.com>
Cc: Richard Smith <smithbone@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
TSEG provides larger amounts of SMRAM than the 128 KB available with
legacy SMRAM and high SMRAM.
Route access to tseg into nowhere when enabled, for both cpus and
busmaster dma, and add tseg window to smram region, so cpus can access
it in smm mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once the SMRAM.D_LCK bit has been set by the guest several bits in SMRAM
and ESMRAMC become readonly until the next machine reset. Implement
this by updating the wmask accordingly when the guest sets the lock bit.
As the lock it itself is locked down too we don't need to worry about
the guest clearing the lock bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not all bits in SMRAM and ESMRAMC can be changed by the guest.
Add wmask defines accordingly and set them in mch_reset().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cache bits in ESMRAMC are hardcoded to 1 (=disabled) according to
the q35 mch specs. Add and use a define with this default.
While being at it also update the SMRAM default to use the name (no code
change, just makes things a bit more readable).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When H_SMRAME is 1, low memory at 0xa0000 is left alone by
SMM, and instead the chipset maps the 0xa0000-0xbffff window at
0xfeda0000-0xfedbffff. This affects both the "non-SMM" view controlled
by D_OPEN and the SMM view controlled by G_SMRAME, so add two new
MemoryRegions and toggle the enabled/disabled state of all four
in mch_update_smram.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's easier to inline it now that most of its work is done by the CPU
(rather than the chipset) through /machine/smram and the memory API.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram. This extra region is enabled or disabled
as the CPU enters/exits SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This region is exported at /machine/smram. It is "empty" if
SMRAME=0 and points to SMRAM if SMRAME=1. The CPU will
enable/disable it as it enters or exits SMRAM.
While touching nearby code, the existing memory region setup was
slightly inconsistent. The smram_region is *disabled* in order to open
SMRAM (because the smram_region shows the low VRAM instead of the RAM
at 0xa0000). Because SMRAM is closed at startup, the smram_region must
be enabled when creating the i440fx or q35 devices.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not clear from the code how a 0 parameter should be handled by the
hardware. Keep the same behavior as ffs(0) - 1 == -1.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-4-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make address_space_rw take transaction attributes, rather
than always using the 'unspecified' attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
After commit 5312bd8 the bonito_readl() and bonito_writel() have been
accessing incorrect addresses. Consequently QEMU is crashing when trying
to boot Linux kernel on fulong2e machine.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Fixes a QEMU crash when passing iommu parameter in command line.
Running
x86_64-softmmu/qemu-system-x86_64 -machine pc,iommu=on -enable-kvm
leads to crash:
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.
Aborted (core dumped)
This happens because commit e79d5a6 ("machine: remove qemu_machine_opts global
list") removed the global option descriptions and moved them to MachineState's
QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the device models where initialization obviously can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU4hugAAoJEL/70l94x66DZXEH/i72tOgvKZfAjfq2xmHXNEsr
roCfTFIIjKK7feyW6YgwT5pgex6I5umFsO+uIyI/wbu8nDl/3NYEQBT4fR2cGfli
GKeJOEu8kf+Zt8U+fbxyVQclbuU5S0Ujsg1fX4QXC4swB5fGLT2cRWJ5qd6hKBQs
GflBuLa7h4eOzcTtOPpqRIwZ8mQE0uxv/hKq9kYLKHXJN2aWsiOls8KQ2CXj2yAl
p6bMS5f0H0S/1hvQcQV9EazX7owlPIEet3AmSL1TC2sjJ8hrNGMBoFPtUys1uqjc
B3CwuGi0JtWIduFYV9vZ/Ze4G7Y2iZlqc5vDxIl94d+iFmoHymDOi3mFUZ3H8XQ=
=Lk9p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
