acpi_table_builtin is now always false, it is not necessary to check it
again.
This patch just removes it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190214084939.20640-4-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Function acpi_table_add_builtin() is not used anymore.
Remove the definition and declaration.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190214084939.20640-3-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Function pc_acpi_init() is not used anymore.
Remove the definition and declaration.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190214084939.20640-2-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These checks at the beginning of some of the tests are mostly useless:
We only run the tests on x86 anyway, and g_test_message() does not
print anything unless you call g_test_init() first.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1551456970-463-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implement the watchdog timer for the stellaris boards.
This device is a close variant of the CMSDK APB watchdog
device, so we can model it by subclassing that device and
tweaking the behaviour of some of its registers.
Signed-off-by: Michel Heily <michelheily@gmail.com>
Reviewed-by: Peter Maydell <petser.maydell@linaro.org>
[PMM: rewrote commit message, fixed a few checkpatch nits,
added comment giving the URL of the spec for the Stellaris
variant of the watchdog device]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we have the extended memory map (high IO regions beyond the
scalable RAM) and dynamic IPA range support at KVM/ARM level
we can bump the legacy 255GB initial RAM limit. The actual maximum
RAM size now depends on the physical CPU and host kernel, in
accelerated mode. In TCG mode, it depends on the VCPU
AA64MMFR0.PARANGE.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-11-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are about to allow the memory map to grow beyond 1TB and
potentially overshoot the VCPU AA64MMFR0.PARANGE.
In aarch64 mode and when highmem is set, let's check the VCPU
PA range is sufficient to address the highest GPA of the memory
map.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-10-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the machine class kvm_type() callback.
It returns the number of bits requested to implement the whole GPA
range including the RAM and IO regions located beyond.
The returned value is passed though the KVM_CREATE_VM ioctl and
this allows KVM to set the stage2 tables dynamically.
To compute the highest GPA used in the memory map, kvm_type()
must freeze the memory map by calling virt_set_memmap().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-9-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up to now the memory map has been static and the high IO region
base has always been 256GiB.
This patch modifies the virt_set_memmap() function, which freezes
the memory map, so that the high IO range base becomes floating,
located after the initial RAM and the device memory.
The function computes
- the base of the device memory,
- the size of the device memory,
- the high IO region base
- the highest GPA used in the memory map.
Entries of the high IO region are assigned a base address. The
device memory is initialized.
The highest GPA used in the memory map will be used at VM creation
to choose the requested IPA size.
Setting all the existing highmem IO regions beyond the RAM
allows to have a single contiguous RAM region (initial RAM and
possible hotpluggable device memory). That way we do not need
to do invasive changes in the EDK2 FW to support a dynamic
RAM base.
Still the user cannot request an initial RAM size greater than 255GB.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-8-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The machine RAM attributes will need to be analyzed during the
configure_accelerator() process. especially kvm_type() arm64
machine callback will use them to know how many IPA/GPA bits are
needed to model the whole RAM range. So let's assign those machine
state fields before calling configure_accelerator.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-7-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the kvm_arm_get_max_vm_ipa_size() helper that returns the
number of bits in the IPA address space supported by KVM.
This capability needs to be known to create the VM with a
specific IPA max size (kvm_type passed along KVM_CREATE_VM ioctl.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARM, the kvm_type will be resolved by querying the KVMState.
Let's add the MachineState handle to the callback so that we
can retrieve the KVMState handle. in kvm_init, when the callback
is called, the kvm_state variable is not yet set.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-5-eric.auger@redhat.com
[ppc parts]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the prospect to introduce an extended memory map supporting more
RAM, let's split the memory map array into two parts:
- the former a15memmap, renamed base_memmap, contains regions below
and including the RAM. MemMapEntries initialized in this array
have a static size and base address.
- extended_memmap, only initialized with entries located after the
RAM. MemMapEntries initialized in this array only get their size
initialized. Their base address is dynamically computed depending
on the the top of the RAM, with same alignment as their size.
Eventually base_memmap entries are copied into the extended_memmap
array. Using two separate arrays however clarifies which entries
are statically allocated and those which are dynamically allocated.
This new split will allow to grow the RAM size without changing the
description of the high IO entries.
We introduce a new virt_set_memmap() helper function which
"freezes" the memory map. We call it in machvirt_init as
memory attributes of the machine are not yet set when
virt_instance_init() gets called.
The memory map is unchanged (the top of the initial RAM still is
256GiB). Then come the high IO regions with same layout as before.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for a split of the memory map into a static
part and a dynamic part floating after the RAM, let's rename the
regions located after the RAM
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190304101339.25970-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We introduce an helper to create a memory node.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190304101339.25970-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will allow sharing code that adjusts rmode beyond
the existing users.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This decoding more closely matches the ARMv8.4 Table C4-6,
Encoding table for Data Processing - Register Group.
In particular, op2 == 0 is now more than just Add/sub (with carry).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We do not need an out-of-line helper for manipulating bits in pstate.
While changing things, share the implementation of gen_ss_advance.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL0+UMA check is unique to DAIF. While SPSel had avoided the
check by nature of already checking EL >= 1, the other post v8.0
extensions to MSR (imm) allow EL0 and do not require UMA. Avoid
the unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minimize the number of places that will need updating when
the virtual host extensions are added.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Found by inspection: Rn is the base register against which the
load began; I is the register within the mask being processed.
The exception return should of course be processed from the loaded PC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190301202921.21209-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We generally put implicitly defined types in whatever module triggered
their definition. This is wrong for array types, as the included test
case demonstrates. Let's have a closer look at it.
Type 'Status' is defined sub-sub-module.json. Array type ['Status']
occurs in main module qapi-schema-test.json and in
include/sub-module.json. The main module's use is first, so the array
type gets put into the main module.
The generated C headers define StatusList in qapi-types.h. But
include/qapi-types-sub-module.h uses it without including
qapi-types.h. Oops.
To fix that, put the array type into its element type's module.
Now StatusList gets generated into qapi-types-sub-module.h, which all
its users include.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The forward reference from the main module to the sub-module works
fine, except for an issue visible in qapi-schema-test.out: the array
type wrapped around the forward reference ends up in the main module,
not the sub-module. The next commit will explain why that's bad, and
fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The lists in UserDefNativeListUnion aren't "native", they're lists of
built-in types. The next commit will add a list of a user-defined
type. Drop "Native", and adjust the tests using the type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The #include directives to pull in sub-modules use file names relative
to the main module. Works only when all modules are in the same
directory, or the main module's output directory is in the compiler's
include path. Use relative file names instead.
The dummy variable we generate to avoid empty .o files has an invalid
name for sub-modules in other directories. Fix that.
Both messed up in commit 252dc3105f "qapi: Generate separate .h, .c
for each module". Escaped testing because tests/qapi-schema-test.json
doesn't cover sub-modules in other directories, only
tests/qapi-schema/include-relpath.json does, and we generate and
compile C code only for the former, not the latter. Fold the latter
into the former. This would have caught the mistakes fixed in this
commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Not much of an improvement now, but the next commit will profit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 967c885108 neglected to cover arrays of conditional types. Do
that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The next few commits mess with array types, and having the changes
exposed in output of test-qapi.py will be useful.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rationale added to commit message]
Version: GnuPG v1
iQEcBAABAgAGBQJcfh/0AAoJEO8Ells5jWIRmqIH/RbXUBbnhqBq/X2lDfz8A5o2
9PowtrMj7tT0ZDpFkDtz8UcQVLvMa4A5c6lgQ9kjiCuX3bISjqvkUc0w/TMjgQCX
7AGObzdgoVY58OmLbmmKYduTWbVZf33qton+yee0g92F+O/mroH9PZIUmDOC+Mm9
iU+CFiMHIjfFv9BogTvFk3nf9XD9zMMTJLbFe2iA64KYUNPy2ncURlltlMTSqRDz
PDawd7bmuVwWBLekNpwe0vliJC2t5/Cd78Njc7HMuKJsivmZAcFqJQ2xA2XxzmLp
bQrYAXiaC3N/gDqgDsNNp/Buuy4pBJKFVAPYveBIqw9LwGYFwkkMZqGb8/9kca0=
=zAY7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 05 Mar 2019 07:06:28 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tests: Add a test for qemu self announcements
hmp: Add hmp_announce_self
qmp: Add announce-self command
virtio-net: Allow qemu_announce_self to trigger virtio announcements
net: Add a network device specific self-announcement ability
migration: Switch to using announce timer
virtio-net: Switch to using announce timer
migration: Add announce parameters
net: Introduce announce timer
net: netmap: improve netmap_receive_iov()
net: netmap: simplify netmap_receive()
net: netmap: small improvements netmap_send()
net/colo-compare.c: Remove duplicated code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now expose qemu_announce_self through QMP and HMP. Add a test
with some very basic packet validation (make sure we get a RARP).
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add an HMP command to trigger self annocements.
Unlike the QMP command (which takes a set of parameters), the HMP
command reuses the set of parameters used for migration.
Signend-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a qmp command that can trigger guest announcements.
It uses its own announce-timer instance, and parameters
passed to it explicitly in the command.
Like most qmp commands, it's in the main thread/bql, so
there's no racing with any outstanding timer.
Based on work of Germano Veit Michel <germano@redhat.com> and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Expose the virtio-net self announcement capability and allow
qemu_announce_self() to call it.
These announces are caused by something external (i.e. the
announce-self command); they won't trigger if the migration
counter is triggering announces at the same time.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Some network devices have a capability to do self announcements
(ex: virtio-net). Add infrastructure that would allow devices
to expose this ability.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Switch the announcements to using the new announce timer.
Move the code that does it to announce.c rather than savevm
because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all
in the main thread/bql, and so there's never any racing with
the timers themselves.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Switch virtio's self announcement to use the AnnounceTimer.
It keeps it's own AnnounceTimer (per device), and starts running it
using a migration post-load and a virtual clock; that way the
announce happens once the guest is actually running.
The timer uses the migration parameters to set the timing of
the repeats.
Based on earlier patches by myself and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'announce timer' will be used by migration, and explicit
requests for qemu to perform network announces.
Based on the work by Germano Veit Michel <germano@redhat.com>
and Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Changes:
- Save CPU cycles by computing the return value while scanning the
input iovec, rather than calling iov_size() at the end.
- Remove check for s->tx != NULL, because it cannot happen.
- Cache ring->tail in a local variable and use it to check for
space in the TX ring. The use of nm_ring_empty() was invalid,
because nobody is updating ring->cur and ring->head at that point.
- In case we run out of netmap slots in the middle of a packet,
move the wake-up point by advancing ring->cur, but do not
expose the incomplete packet (i.e., by updating also ring->head).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Improve code reuse by implementing netmap_receive() with a call
to netmap_receive_iov().
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change improves the handling of incomplete multi-slot packets
(e.g. with the NS_MOREFRAG set), by advancing ring->head only on
complete packets. The ring->cur pointer is advanced in any case in
order to acknowledge the kernel and move the wake-up point (thus
avoiding repeated wake-ups).
Also don't be verbose when incomplete packets are found.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix duplicated code:
https://bugs.launchpad.net/qemu/+bug/1811499
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* Support OSX Mojave by ensuring that we always make Cocoa UI
function calls from the main thread, never from any other QEMU
thread. This was previously mostly harmless, but on Mojave
it will cause OSX to terminate the QEMU process.
-----BEGIN PGP SIGNATURE-----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=eOyH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-cocoa-20190304' into staging
cocoa tree:
* Support OSX Mojave by ensuring that we always make Cocoa UI
function calls from the main thread, never from any other QEMU
thread. This was previously mostly harmless, but on Mojave
it will cause OSX to terminate the QEMU process.
# gpg: Signature made Mon 04 Mar 2019 16:48:57 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-cocoa-20190304:
ui/cocoa: Perform UI operations only on the main thread
ui/cocoa: Subclass NSApplication so we can implement sendEvent
ui/cocoa: Don't call NSApp sendEvent directly from handleEvent
ui/cocoa: Move console/device menu creation code up in file
ui/cocoa: Factor out initial menu creation
ui/cocoa: Use the pixman image directly in switchSurface
ui/cocoa: Ensure we have the iothread lock when calling into QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
