get_pointer()'s print() callback might return a heap allocated
string, to avoid adding dedicated get_pointer_foo for this case
convert current print() callbacks to return temporary heap
allocated string and make get_pointer() free it.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a stand-in for Michael Roth's QContext. I expect this to be
replaced once QContext is completed.
The IOThread object is an AioContext event loop thread. This patch adds
the concept of multiple event loop threads, allowing users to define
them.
When SMP guests run on SMP hosts it makes sense to instantiate multiple
IOThreads. This spreads event loop processing across multiple cores.
Note that additional patches are required to actually bind a device to
an IOThread.
[Andreas Färber <afaerber@suse.de> pointed out that the embedded parent
object instance should be called "parent_obj" and have a newline
afterwards. This patch has been changed to reflect this.
-- Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It can be useful to run an AioContext from a thread which normally does
not "own" the AioContext. For example, request draining can be
implemented by acquiring the AioContext and looping aio_poll() until all
requests have been completed.
The following pattern should work:
/* Event loop thread */
while (running) {
aio_context_acquire(ctx);
aio_poll(ctx, true);
aio_context_release(ctx);
}
/* Another thread */
aio_context_acquire(ctx);
bdrv_read(bs, 0x1000, buf, 1);
aio_context_release(ctx);
This patch implements aio_context_acquire() and aio_context_release().
Note that existing aio_poll() callers do not need to worry about
acquiring and releasing - it is only needed when multiple threads will
call aio_poll() on the same AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QemuMutex does not guarantee fairness and cannot be acquired
recursively:
Fairness means each locker gets a turn and the scheduler cannot cause
starvation.
Recursive locking is useful for composition, it allows a sequence of
locking operations to be invoked atomically by acquiring the lock around
them.
This patch adds RFifoLock, a recursive lock that guarantees FIFO order.
Its first user is added in the next patch.
RFifoLock has one additional feature: it can be initialized with an
optional contention callback. The callback is invoked whenever a thread
must wait for the lock. For example, it can be used to poke the current
owner so that they release the lock soon.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is often useful to find an object's child property name. Also use
this new function to simplify the implementation of
object_get_canonical_path().
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch keep the recursive way of doing things but simplify it by giving
two responsabilities to all block filters implementors.
They will need to do two things:
-Set the is_filter field of their block driver to true.
-Implement the bdrv_recurse_is_first_non_filter method of their block driver like
it is done on the Quorum block driver. (block/quorum.c)
[Paolo Bonzini <pbonzini@redhat.com> pointed out that this patch changes
the semantics of blkverify, which now recurses down both bs->file and
s->test_file.
-- Stefan]
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extend test file 060 by a test case for corruption occuring concurrently
to a COW request. QEMU should not crash but rather return an appropriate
error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, bdrv_debug_resume() requires every bs->drv in the BDS stack
to be NULL until a bs->drv with an implementation of bdrv_debug_resume()
is found. For a normal function, this would be fine, but this is a
function for debugging purposes and should therefore allow intermediate
BDS not to have a driver (i.e., be "ejected"). Otherwise, it is hard to
debug such situations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before dereferencing bs->drv for a call to its member bdrv_co_readv(),
copy_sectors() should check whether that pointer is indeed valid, since
it may have been set to NULL by e.g. a concurrent write triggering the
corruption prevention mechanism.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After migration has completed, we call bdrv_invalidate_cache() so that
drivers which cache some data drop their stale copy of the data and
reread it from the image file to get a new version of data that the
source modified while the migration was running.
Reloading metadata from the image file is useless, though, if the size
of the image file stays stale (this is a value that is cached for all
image formats in block.c). Reads from (meta)data after the old EOF
return only zeroes, causing image corruption.
We need to update bs->total_sectors in all layers that could potentially
have changed their size (i.e. backing files are not a concern - if they
are changed, we're in bigger trouble)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When reading the refcount table entry in get_refcount(), only bits which
are actually significant for the refcount block offset should be taken
into account.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTIGWkAAoJEJykq7OBq3PIsvYH/jLFORFyUHflSsEmPjjRKGfR
Jd41UP67CXqgOyeJfDDN/fks2o6n3woRsoz/EfPXTiOvXB50jBKqmBarOwh/Zejq
/5hpUC8IyYOFpeKbiCSneXvANP+0CfH/FD8yP64a3FTBXQFQD9GzJpKf3zlcmNvI
XotlIr/WxTXXNSQf2dTleobGJWg8otDFREBCvalTndSBjYZ0GdvvNOCiAkqYviX2
wLjrrRvJYW/lxOTIfTmGQFHs89tjq9ZvotKr9QPOQ5MOGaBExYnOTaSHmmPHjYpf
HsWkk+u85vLSRp5FU5CTW2VfhIujBghwaFFnVh2BdMjIlzkjbDnDMcRr2YgebOw=
=zhuM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Net patches
# gpg: Signature made Wed 12 Mar 2014 13:48:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
tap: avoid deadlocking rx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Functionally, this is a revert of Jocelyn's r3309 /
55aa45ddde (Quickly hack PowerPC BIOS
able to boot on CDROM again.), for which we do not have the sources.
Therefore the sources used are v0.4.1 plus pc-bios/ohw.diff plus a
workaround turning IDE errors into warnings.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
The Win32 build warns about trace/control-internal.h:
warning: 'trace_event_count' declared inline after being called
Fix this by simply reordering trace_event_id() and
trace_event_count().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/kiszka/queues/slirp:
slirp smb with modern win guests when samba is also running on host
qemu/slirp: Fix SMB security configuration on newer samba versions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/qmp-unstable/queue/qmp:
tests: test-qmp-commands: Fix double free
qapi script: do not add "_" for every capitalized char in enum
qapi script: do not allow string discriminator
qapi: convert BlockdevOptions to use enum discriminator
qapi script: support enum type as discriminator in union
qapi script: use same function to generate enum string
qapi script: code move for generate_enum_name()
qapi script: check correctness of union
qapi script: remember line number in schema parsing
qapi script: add check for duplicated key
qapi script: remember explicitly defined enum values
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support for pci-serial-2x and pci-serial-4x
was added to the inf file.
Standard Windows driver mf.sys used to
split single function device into per-port nodes.
Signed-off-by: Miki Mishael <mmishael@redhat.com>
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The net subsystem has a control flow mechanism so peer NetClientStates
can tell each other to stop sending packets. This is used to stop
monitoring the tap file descriptor for incoming packets if the guest rx
ring has no spare buffers.
There is a corner case when tap_can_send() is true at the beginning of
an event loop iteration but becomes false before the tap_send() fd
handler is invoked.
tap_send() will read the packet from the tap file descriptor and attempt
to send it. The net queue will hold on to the packet and return 0,
indicating that further I/O is not possible. tap then stops monitoring
the file descriptor for reads.
This is unlike the normal case where tap_can_send() is the same before
and during the event loop iteration. The event loop would simply not
monitor the file descriptor if tap_can_send() returns true. Upon next
iteration it would check tap_can_send() again and begin monitoring if we
can send.
The deadlock happens because tap_send() explicitly disabled read_poll.
This is done with the expectation that the peer will call
qemu_net_queue_flush(). But hw/net/virtio-net.c does not monitor
vm_running transitions and issue the flush. Hence we're left with a
broken tap device.
Cc: qemu-stable@nongnu.org
Reported-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After numerous reports that -smb (or -netdev user,smb=foo) not working
with modern windows (win7 and vista are reported as non-working), I
started digging myself. And found that indeed it doesn't work, and
why.
The thing is that modern win tries to connect to port 445 (microsoft-ds)
first, and if that fails, it falls back to old port 139 (netbios-ssn).
slirp code in qemu only redirects port 139, it does not touch port 445.
So the prob is that if samba is also running on the host, guest will try
to communicate using port 445, and that will succed, but ofcourse guest
will not talk with our samba but with samba running on the host.
If samba is not running on the host, guest will fall back to port 139,
and will reach the redirecting rule and qemu will spawn smbd correctly.
The solution is to redirect both ports (139 and 445), and the fix is
a one-liner, adding second call to slirp_add_exec() at the end of
net/slirp.c:slirp_smb() function (provided below).
But it looks like that is not a proper fix really, since in theory
we should redirect both ports to the SAME, single samba instance,
but I'm not sure this is possible with slirp. Well, even if two
smbd processes will be run on the same config dir, it should not
be a problem.
The one-liner (not exactly 1 since it touches previous line too) is like
this:
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The smb.conf automatically generated by qemu's -smb option fails on current
samba, because smbd rejects the security=share option with the following warning:
> WARNING: Ignoring invalid value 'share' for parameter 'security'
Which makes it fall back to security=user without guest login.
This results in being unable to login to the samba server from the guest OS.
This fixes it by selecting 'user' explicitly and mapping
unknown users to guest logins.
Signed-off-by: Michael Buesch <m@bues.ch>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The LEON3 processor has support for the CASA instruction which is
normally only available for SPARC V9 processors. Binutils 2.24
and GCC 4.9 will support this instruction for LEON3. GCC uses it to
generate C11 atomic operations.
The CAS synthetic instruction uses an ASI of 0x80. If TARGET_SPARC64 is
not defined use a supervisor data load/store for an ASI of 0x80 in
helper_ld_asi()/helper_st_asi(). The supervisor data load/store was
choosen according to the LEON3 documentation.
The ASI 0x80 is defined in the SPARC V9 manual, Table 12—Address Space
Identifiers (ASIs). Here we have: 0x80, ASI_PRIMARY, Unrestricted
access, Primary address space.
Tested with the following program:
#include <assert.h>
#include <stdatomic.h>
void test(void)
{
atomic_int a;
int e;
_Bool b;
atomic_store(&a, 1);
e = 1;
b = atomic_compare_exchange_strong(&a, &e, 2);
assert(b);
assert(atomic_load(&a) == 2);
atomic_store(&a, 3);
e = 4;
b = atomic_compare_exchange_strong(&a, &e, 5);
assert(!b);
assert(atomic_load(&a) == 3);
}
Tested also on a NGMP board with a LEON4 processor.
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
More small fixes: the issues annoy developers so
I thought they are worth fixing quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTHvMwAAoJECgfDbjSjVRp2SIH/Rh5X1U+tUjr0xnvWllXTgdP
ixot7AxXO2UkmPqhyAPV/oEr/3xBFyp8C8ZysQzaHsUqDyq40DtkKp+UWvG6EjpY
3Ser+wA9NzsT67ixtEIN2z1qnO7l29ErggS8EfTOh7gyFJzSKN8x3GV2ENB/FBJW
k0LSO7aJ0rmTdg63u9T3RIctKPbtCBO8wlE6wuS461pBshYNr6aVkMWDY9bVpx/f
ol/aoJs7xaPkJs1qFzOfOisYi3LeBZR4O9gRRixqzwJtwWl5rMG3y/oBxbYDfyZw
NbP7zFAWCj/YYgG0U8L9SR4P28n65FoULAvQ9CRY1+fF7Ozwj0SzoU2Ld6fvINw=
=VRRB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,test bug fixes
More small fixes: the issues annoy developers so
I thought they are worth fixing quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 11 Mar 2014 11:27:44 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
acpi-test: update expected SSDT files
acpi-build: don't access unaligned addresses
q35: Correct typo BRDIGE -> BRIDGE
configure: don't modify .status on error
pc: avoid duplicate names for ROM MRs
loader: rename in_ram/has_mr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kvm/uq/master:
target-i386: bugfix of Intel MPX
file_ram_alloc: unify mem-path,mem-prealloc error handling
kvm-all: exit in case max vcpus exceeded
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pthread_setname_np was introduced with 2.12.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* implement WFE as yield (improves performance with emulated SMP)
* fixes to avoid undefined behaviour shifting left into sign bit
* libvixl format string fixes for 32 bit hosts
* fix build error when intptr_t and tcg_target_long are different
sizes (eg x32)
* implement PMCCNTR register
* fix incorrect setting of E bit in CPSR (broke booting under
KVM on ARM)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=SHmz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140310' into staging
target-arm queue:
* implement WFE as yield (improves performance with emulated SMP)
* fixes to avoid undefined behaviour shifting left into sign bit
* libvixl format string fixes for 32 bit hosts
* fix build error when intptr_t and tcg_target_long are different
sizes (eg x32)
* implement PMCCNTR register
* fix incorrect setting of E bit in CPSR (broke booting under
KVM on ARM)
# gpg: Signature made Mon 10 Mar 2014 15:05:25 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140310:
target-arm: Implement WFE as a yield operation
hw/arm/musicpal: Avoid shifting left into sign bit
hw/ssi/xilinx_spips.c: Avoid shifting left into sign bit
hw/arm/omap1.c: Avoid shifting left into sign bit
pxa2xx: Don't shift into sign bit
libvixl: Fix format strings for several int64_t values
target-arm: Fix intptr_t vs tcg_target_long
target-arm: Implements the ARM PMCCNTR register
target-arm: Fix incorrect setting of E bit in CPSR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ret variable is freed twice, but on the second time we actually want
to free ret3 instead. Don't know why this didn't explode.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Now "enum AIOContext" will generate AIO_CONTEXT instead of A_I_O_CONTEXT,
"X86CPU" will generate X86_CPU instead of X86_C_P_U.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since enum based discriminators provide better type-safety and
ensure that future qapi additions do not forget to adjust dependent
unions, forbid using string as discriminator from now on.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
After this patch, hidden enum type BlockdevOptionsKind will not
be generated, and other API can use enum BlockdevDriver.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
By default, any union will automatically generate a enum type as
"[UnionName]Kind" in C code, and it is duplicated when the discriminator
is specified as a pre-defined enum type in schema. After this patch,
the pre-defined enum type will be really used as the switch case
condition in generated C code, if discriminator is an enum field.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Prior to this patch, qapi-visit.py used custom code to generate enum
names used for handling a qapi union. Fix it to instead reuse common
code, with identical generated results, and allowing future updates to
generation to only need to touch one place.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Later both qapi-types.py and qapi-visit.py need a common function
for enum name generation.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since line info is remembered as QAPISchema.line now, this patch
uses it as additional info for every expr in QAPISchema inside qapi.py,
then improves error message with it in checking of exprs.
For common union the patch will check whether base is a valid complex
type if specified. For flat union it will check whether base presents,
whether discriminator is found in base, whether the key of every branch
is correct when discriminator is an enum type.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Before this patch, 'QAPISchemaError' scans whole input until 'pos'
to get error line number. After this patch, the scan is avoided since
line number is remembered in schema parsing. This patch also benefits
other error report functions, which would be introduced later.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It is bad that same key was specified twice, especially when a union has
two branches with same condition. This patch can prevent it.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Later other scripts will need to check the enum values.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
casting an unaligned address to e.g.
uint32_t can trigger undefined behaviour in C.
Replace cast + assignment with memcpy.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
./configure --help
make
will try to re-run configure with --help
which isn't what was intended.
The reason is that config.status was written
even on configure error.
Defer writing config.status until configure
has completed successfully.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Since
commit 04920fc0fa
loader: store FW CFG ROM files in RAM
RAM MRs including ROM files in FW CFGs are created
and named using the file basename.
This becomes problematic if these names are
supplied by user, since the basename might not
be unique.
There are two cases we care about:
- option-rom flag.
- option ROM for devices. This triggers e.g. when
using rombar=0.
At the moment we get an assert. E.g
qemu -option-rom /usr/share/ipxe/8086100e.rom -option-rom
/usr/share/ipxe.efi/8086100e.rom
RAMBlock "/rom@genroms/8086100e.rom" already registered, abort!
This is a regression from 1.6.
For now let's keep it simple and just avoid creating the
MRs in case of option ROMs.
when using 1.7 machine types, enable
option ROMs in RAM to match that version.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The correct size of cpuid 0x0d sub-leaf 4 is 0x40, not 0x10.
This is confirmed by Anvin H Peter and Mallick Asit K.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Asit K Mallick <asit.k.mallick@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
