Up until now, the EXTI implementation had 16 inbound GPIOs connected to
the 16 outbound GPIOs of STM32L4x5 SYSCFG.
The EXTI actually handles 40 lines (namely 5 from STM32L4x5 USART
devices which are already implemented in QEMU).
In order to connect USART devices to EXTI, this commit consolidates
constants `EXTI_NUM_INTERRUPT_OUT_LINES` (40) and
`EXTI_NUM_GPIO_EVENT_IN_LINES` (16) into `EXTI_NUM_LINES` (40).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current implementation of bcm2835_thermal_ops sets
impl.max_access_size and valid.min_access_size to 4, but leaves
impl.min_access_size and valid.max_access_size unset, defaulting to 1.
This causes issues when the memory system is presented with an access
of size 2 at an offset of 3, leading to an attempt to synthesize it as
a pair of byte accesses at offsets 3 and 4, which trips an assert.
Additionally, the lack of valid.max_access_size setting causes another
issue: the memory system tries to synthesize a read using a 4-byte
access at offset 3 even though the device doesn't allow unaligned
accesses.
This patch addresses these issues by explicitly setting both
impl.min_access_size and valid.max_access_size to 4, ensuring proper
handling of access sizes.
Error log:
ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Bail out! ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Aborted
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine raspi3b -m 1G -qtest stdio
readw 0x3f212003
EOF
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240702154042.3018932-1-zheyuma97@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In pl011_get_baudrate(), when we calculate the baudrate we can
accidentally divide by zero. This happens because although (as the
specification requires) we treat UARTIBRD = 0 as invalid, we aren't
correctly limiting UARTIBRD and UARTFBRD values to the 16-bit and 6-bit
ranges the hardware allows, and so some non-zero values of UARTIBRD can
result in a zero divisor.
Enforce the correct register field widths on guest writes and on inbound
migration to avoid the division by zero.
ASAN log:
==2973125==ERROR: AddressSanitizer: FPE on unknown address 0x55f72629b348
(pc 0x55f72629b348 bp 0x7fffa24d0e00 sp 0x7fffa24d0d60 T0)
#0 0x55f72629b348 in pl011_get_baudrate hw/char/pl011.c:255:17
#1 0x55f726298d94 in pl011_trace_baudrate_change hw/char/pl011.c:260:33
#2 0x55f726296fc8 in pl011_write hw/char/pl011.c:378:9
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine realview-pb-a8 -qtest stdio
writeq 0x1000b024 0xf8000000
EOF
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240702155752.3022007-1-zheyuma97@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The error message is actually expressive, considering QEMU only. But
when called from Libvirt, talking about "size" can be confusing, because
in Libvirt "size" translates to the memory backend size in QEMU (maximum
size) and "current" translates to the QEMU "size" property.
Let's simply avoid talking about the "size" property and spell out that
some device memory is still plugged.
Message-ID: <20240416141426.588544-1-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Liang Cong <lcong@redhat.com>
Cc: Mario Casquero <mcasquer@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
* support AST2700 network
-----BEGIN PGP SIGNATURE-----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=UygB
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu into staging
aspeed queue:
* support AST2700 network
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNJCcACgkQUaNDx8/7
# 7KF7pw//So48XdPJhdQukO/PDLGSYL8rRjDfZbQFLLw10MozcZZ/Nz/BCzrNxJRg
# rHP/shyO3XL1YZ6U1LNXk6E845giVriSpRRjGX9CuK4fypM9xom6qAIOtOLeH7hG
# iTMW++IxN/JgVmVOKYn3C+2+odiq6NzZxFrblVtGPUDtNkkC9BaYGHnccMsl5zQh
# LOSPJxqLiiuDjZPqdwa4fMbtEeNTU3A0WLlWxX7yPfJt2T20a4wE6bdWVGcI6fiV
# QbCmLLrMXhuZFx+uT4B2hbHi+hGS5H+F3QBOefum6z+i9NEbfAZSyusd8/qTEify
# fSBqxL4LD6K4WKL1Hg9959cBcm5zWgPXk7znus4E/TZuUTdSHaPC7clESIcYqWPS
# veEAppmHneO4cdmK1m+Gv4gpWD/adS4ZfV7O+C3z149ms0gL4JrK6QndPdE5QuIW
# u47PhIT3oIM0WznnMusoCndFxs6Gl/GBkzdxW0gdoJKBRfymbsroWeZamAWTznbV
# mL8Td8bEP/NcV40cm1PtpZyl7j0MzxcKDUHKv9ioQTXLUpkl5LSsIGmd1m78WRlE
# J6bUJ3jqQT6/s5i3TVqTGe7xuqMkg+9Er8rn5nAWgSronsf4nprAfOU8Lj+b06BM
# YRroGgU2lAQrv17liQExrG3Tj1SH+oEp1q0qEq7qo824HlGjBkI=
# =UygB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 09 Jul 2024 04:51:03 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu:
machine_aspeed.py: update to test network for AST2700
machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700
hw/block: m25p80: support quad mode for w25q01jvq
aspeed/soc: set dma64 property for AST2700 ftgmac100
hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits
hw/net:ftgmac100: introduce TX and RX ring base address high registers to support 64 bits
hw/net:ftgmac100: update ring base address to 64 bits
hw/net:ftgmac100: update memory region size to 64KB
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vfio_display_edid_init() can fail for many reasons and return silently.
It would be good to report the error.
Old mdev driver may not support vfio edid region and we allow to go
through in this case.
vfio_display_edid_update() isn't changed because it can be called at
runtime when UI changes (i.e. window resize).
Fixes: 08479114b0 ("vfio/display: add edid support.")
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
EDID related device region info is leaked in vfio_display_edid_init()
error path and VFIODisplay destroying path.
Fixes: 08479114b0 ("vfio/display: add edid support.")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device
assignment"), in case of bypass mode, we transiently enabled the
IOMMU MR to allow the set_page_size_mask() to be called and pass
information about the page size mask constraint of cold plugged
VFIO devices. Now we do not use the IOMMU MR callback anymore, we
can just get rid of this hack.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Everything is now in place to use the Host IOMMU Device callbacks
to retrieve the page size mask usable with a given assigned device.
This new method brings the advantage to pass the info much earlier
to the virtual IOMMU and before the IOMMU MR gets enabled. So let's
remove the call to memory_region_iommu_set_page_size_mask in
vfio common.c and remove the single implementation of the IOMMU MR
callback in the virtio-iommu.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve the Host IOMMU Device page size mask when this latter is set.
This allows to get the information much sooner than when relying on
IOMMU MR set_page_size_mask() call, whcih happens when the IOMMU MR
gets enabled. We introduce check_page_size_mask() helper whose code
is inherited from current virtio_iommu_set_page_size_mask()
implementation. This callback will be removed in a subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This callback will be used to retrieve the page size mask supported
along a given Host IOMMU device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The error handle argument is not used anywhere. let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vfio_container_get_iova_ranges() to retrieve the usable
IOVA regions of the base container and use it in the Host IOMMU
device implementations of get_iova_ranges() callback.
We also fix a UAF bug as the list was shallow copied while
g_list_free_full() was used both on the single call site, in
virtio_iommu_set_iommu_device() but also in
vfio_container_instance_finalize(). Instead use g_list_copy_deep.
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
In case no IOMMUPciBus/IOMMUDevice are found we need to properly
set the error handle and return.
Fixes : Coverity CID 1549006
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
According to the w25q01jv datasheet at page 16,
it is required to set QE bit in "Status Register 2".
Besides, users are able to utilize "Write Status Register 1(0x01)"
command to set QE bit in "Status Register 2" and
utilize "Read Status Register 2(0x35)" command to get the QE bit status.
To support quad mode for w25q01jvq, update collecting data needed
2 bytes for WRSR command in decode_new_cmd function and
verify QE bit at the second byte of collecting data bit 2
in complete_collecting_data.
Update RDCR_EQIO command to set bit 2 of return data
if quad mode enable in decode_new_cmd.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set dma64 property for ftgmac100 model to support
64bits dram address DMA.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "TXDES 2" and "RXDES 2" to save the high part
physical address of packet buffer.
Ex: TX packet buffer address [34:0]
The "TXDES 2" bits [18:16] which corresponds the bits [34:32]
of the 64 bits address of the TX packet buffer address
and "TXDES 3" bits [31:0] which corresponds the bits [31:0]
of the 64 bits address of the TX packet buffer address.
Update TX and RX packet buffers address type to
64 bits for dram 64 bits address DMA support.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "Normal Priority Transmit Ring Base Address Register High(0x17C)",
"High Priority Transmit Ring Base Address Register High(0x184)" and
"Receive Ring Base Address Register High(0x18C)" to save the high part physical
address of descriptor manager.
Ex: TX descriptor manager address [34:0]
The "Normal Priority Transmit Ring Base Address Register High(0x17C)"
bits [2:0] which corresponds the bits [34:32] of the 64 bits address of
the TX ring buffer address.
The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the TX ring buffer address.
Introduce a new sub region which size is 0x100 for the set of new registers
and map it at 0x100 in the container region.
This sub region range is from 0x100 to 0x1ff.
Introduce a new property and object attribute to activate the region for new registers.
Introduce a new memop handlers for the new register read and write.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update TX and RX ring base address data type to uint64_t for
64 bits dram address DMA support.
Both "Normal Priority Transmit Ring Base Address Register(0x20)" and
"Receive Ring Base Address Register (0x24)" are used for saving the
low part physical address of descriptor manager.
Therefore, changes to set TX and RX descriptor manager address bits [31:0]
in ftgmac100_read and ftgmac100_write functions.
Incrementing the version of vmstate to 2.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
one MAC controller owns 128KB of register space for AST2500.
However, one MAC controller only owns 64KB of register space for AST2600
and AST2700. It set the memory region size 128KB and it occupied another
controllers Address Spaces.
Update one MAC controller memory region size to 0x1000
because AST2500 did not use register spaces over than 64KB.
Introduce a new container region size to 0x1000 and its range
is from 0 to 0xfff. This container is mapped a sub region
for the current set of register.
This sub region range is from 0 to 0xff.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
In order to keep eMMC model simpler to maintain,
extract common properties and the common code from
class_init to the (internal) TYPE_SDMMC_COMMON.
Update the corresponding QOM cast macros.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-6-philmd@linaro.org>
In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>
So far eMMC will only use sd_sleep_state, but
all all states specified for completeness.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-81-philmd@linaro.org>
Some commands expect less than BLOCK_LENGTH.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-80-philmd@linaro.org>
All read/write on DAT lines are explicitly handled.
Reaching this point would be a programming error:
replace by an assertion.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-79-philmd@linaro.org>
These CMD names weren't really useful, "UNKNOWN_CMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-78-philmd@linaro.org>
These ACMD names weren't really useful, "UNKNOWN_ACMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-77-philmd@linaro.org>
All handlers using the 'sd_none' enum got converted,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>
"General command" (GEN_CMD, CMD56) is described as:
GEN_CMD is the same as the single block read or write
commands (CMD24 or CMD17). The difference is that [...]
the data block is not a memory payload data but has a
vendor specific format and meaning.
Thus this block must not be stored overwriting data block
on underlying storage drive. Handle as RAZ/WI.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-3-philmd@linaro.org>
The correct command name is 'SD SEND_OP_COND',
rename accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-4-philmd@linaro.org>
Recent SDHCI expect cards to support the v3.01 spec
to negociate lower I/O voltage. Select it by default.
Versioned machine types with a version of 9.0 or
earlier retain the old default (spec v2.00).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-2-philmd@linaro.org>
Rather than using the obscure 0x4567 magic value,
use a real random one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-5-philmd@linaro.org>
Use the macro instead of two explicit string literals.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-3-philmd@linaro.org>
Calling qemu_plugin_vcpu_init__async() on the vCPU thread
is a detail of plugins, not relevant to TCG vCPU management.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-30-alex.bennee@linaro.org>
cpu::plugin_state is allocated in cpu_common_initfn() when
the vCPU state is created. Release it in cpu_common_finalize()
when we are done.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-29-alex.bennee@linaro.org>
Really the problem here is the return values of fit_load_[kernel|fdt]() are a
little all over the place. However we don't want to somehow get
through not having set kernel_end and having it just be random unused
data.
The compiler complained on an --enable-gcov build:
In file included from ../../hw/core/loader-fit.c:20:
/home/alex/lsrc/qemu.git/include/qemu/osdep.h: In function ‘load_fit’:
/home/alex/lsrc/qemu.git/include/qemu/osdep.h:486:45: error: ‘kernel_end’ may be used uninitialized [-Werror=maybe-uninitialized]
486 | #define ROUND_UP(n, d) ROUND_DOWN((n) + (d) - 1, (d))
| ^
../../hw/core/loader-fit.c:270:12: note: ‘kernel_end’ was declared here
270 | hwaddr kernel_end;
| ^~~~~~~~~~
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Rikalo <arikalo@gmail.com>
Message-Id: <20240705084047.857176-5-alex.bennee@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
romsize is an uint32_t variable. Specifying -1 as an uint32_t value is
obscure way to denote UINT32_MAX.
Worse, if int is wider than 32-bit, it will change the behavior of a
construct like the following:
romsize = -1;
if (romsize != -1) {
...
}
When -1 is assigned to romsize, -1 will be implicitly casted into
uint32_t, resulting in UINT32_MAX. On contrary, when evaluating
romsize != -1, romsize will be casted into int, and it will be a
comparison of UINT32_MAX and -1, and result in false.
Replace -1 with UINT32_MAX for statements involving the variable to
clarify the intent and prevent potential breakage.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240627-reuse-v10-10-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-9-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-8-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Release VFs failed to realize just as we do in unregister_vfs().
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-7-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-6-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with a function number equals to or
is greater than PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-5-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device gets automatically unrealized when being unparented.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-4-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A PF may automatically create VFs and the PF may be function 0.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-3-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disabled means it is a disabled SR-IOV VF or it is powered off, and
hidden from the guest.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-2-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The renamed state will not only represent powering state of PFs, but
also represent SR-IOV VF enablement in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-1-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When a VFIO device is hoplugged in a VM using virtio-iommu, IOMMUPciBus
and IOMMUDevice cache entries are created in the .get_address_space()
handler of the machine IOMMU device. However, these entries are never
destroyed, not even when the VFIO device is detached from the machine.
This can lead to an assert if the device is reattached again.
When reattached, the .get_address_space() handler reuses an
IOMMUDevice entry allocated when the VFIO device was first attached.
virtio_iommu_set_host_iova_ranges() is called later on from the
.set_iommu_device() handler an fails with an assert on 'probe_done'
because the device appears to have been already probed when this is
not the case.
The IOMMUDevice entry is allocated in pci_device_iommu_address_space()
called from under vfio_realize(), the VFIO PCI realize handler. Since
pci_device_unset_iommu_device() is called from vfio_exitfn(), a sub
function of the PCIDevice unrealize() handler, it seems that the
.unset_iommu_device() handler is the best place to release resources
allocated at realize time. Clear the IOMMUDevice cache entry there to
fix hotplug.
Fixes: 817ef10da2 ("virtio-iommu: Implement set|unset]_iommu_device() callbacks")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240701101453.203985-1-clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit d152cdd6f6 ("virtio: use virtio accessor to access packed event")
switched using of address_space_read_cached() to virito_lduw_phys_cached()
to access packed descriptor event.
When we used address_space_read_cached(), we needed to call
virtio_tswap16s() to handle the endianess of the field, but
virito_lduw_phys_cached() already handles it internally, so we no longer
need to call virtio_tswap16s() (as the commit had done for `off_wrap`,
but forgot for `flags`).
Fixes: d152cdd6f6 ("virtio: use virtio accessor to access packed event")
Cc: jasowang@redhat.com
Cc: qemu-stable@nongnu.org
Reported-by: Xoykie <xoykie@gmail.com>
Link: https://lore.kernel.org/qemu-devel/CAFU8RB_pjr77zMLsM0Unf9xPNxfr_--Tjr49F_eX32ZBc5o2zQ@mail.gmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240701075208.19634-1-sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
New DCD command definitions updated in response to review comments
from Markus.
- Used CxlXXXX instead of CXLXXXXX for newly added types.
- Expanded some abreviations in type names to be easier to read.
- Additional documentation for some fields.
- Replace slightly vague cxl r3.1 references with
"Compute Express Link (CXL) Specification, Revision 3.1, XXXX"
to bring them inline with what it says on the specification cover.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240625170805.359278-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's observed that Linux kernel booting with the VM reports a "conflicting
mapping for input ID" FW_BUG.
The IORT doc defines "Number of IDs" to be "the number of IDs in the range
minus one", while virt-acpi-build.c simply stores the number of IDs in the
id_count without the "minus one". Meanwhile, some of the callers pass in a
0xFFFF following the spec. So, this is a mismatch between the function and
its callers.
Fix build_iort_id_mapping() by internally subtracting one from the pass-in
@id_count. Accordingly make sure that all existing callers pass in a value
without the "minus one", i.e. change all 0xFFFFs to 0x10000s.
Also, add a few lines of comments to highlight this change along with the
referencing document for this build_iort_id_mapping().
Fixes: 42e0f050e3 ("hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619201243.936819-1-nicolinc@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In e820_add_entry() the e820_table is reallocated with g_renew() to make
space for a new entry. However, fw_cfg_arch_create() just uses the
existing e820_table pointer. This leads to a use-after-free if anything
adds a new entry after fw_cfg is set up.
Shift the addition of the etc/e820 file to the machine done notifier, via
a new fw_cfg_add_e820() function.
Also make e820_table private and use an e820_get_table() accessor function
for it, which sets a flag that will trigger an assert() for any *later*
attempts to add to the table.
Make e820_add_entry() return void, as most callers don't check for error
anyway.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <a2708734f004b224f33d3b4824e9a5a262431568.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both the other two callers of build_iort_id_mapping() just directly pass
in the IORT_NODE_OFFSET macro. Keeping a "const uint32_t" local variable
storing the same value doesn't have any gain.
Simplify this by replacing the only place using this local variable with
the macro directly.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619001708.926511-1-nicolinc@nvidia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit d7c72735f6 ("target/i386: Add new EPYC CPU versions with updated
cache_info", 2023-05-08) ensured that AMD-defined CPU models did not
have the 'complex_indexing' bit set, but left it set in "-cpu host"
which uses the default ("legacy") cache information.
Reimplement that commit using a CPU feature, so that it can be applied
to all guests using a new machine type, independent of the CPU model.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
-----BEGIN PGP SIGNATURE-----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=LxwO
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu into staging
aspeed queue:
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaDs3QACgkQUaNDx8/7
# 7KEc/BAAj5AS3rLm3NPpU13y1P1hcjuSm1/PVGTJQH+m4K9UaAkJ8VhRB0Y/rdU6
# ygGhKaCHyk96+I49Csz886YU9Wg9qnxaYJAbornHZJVGNy5tuVpQKM20kfgN3XFN
# ENJR3e+J6Ye7kCtR1ujcf0mydWDaDyq0i82ykURsudcQLMnGq1gBQGadYjt1hJoN
# F9HDPgUJ8/wjQnG8BomsrnuvUSpRTbGNV66FNxXdQ6C6d6OTKQfNnXXqrKO+8QPK
# B5XB9FjTk017DUog1jdE1SaEMowml8CmUhjMwLHOcyWhcZpEk90aMX8cQhefUs9y
# O6kNin2UYEjcTHA/lyfMQJQMNDDZTE32MyP1LwRE/5ZiHqrT7ViqNvZSPBGBueUz
# 9B0xiQTuYqcRqlwgyU73DvnTgrsKFdKQSldj5dXYVnWCKeKY/sCWApHMJxN9xMCA
# Uw1E4QfCLkd+TM6DoJAkBHWFsgi44Aym11VU4VviGNRNTgmTptgQzmHiYGNFiGZG
# OypVPM8Ti6UeVnW65l9J9f7xA0jDB+XQjhCCaoax9GlUMA4C4/Aln5OXXxIWRWFd
# XA3Gn3c/S2j7rMqdfAk68xDHuAJ3wShHlw6HLRd1Xki05WFTeLj1lejLHMdfpNmr
# DkQimzHShBqZzZGxc7FsO0keGY8kyIJkZhbCCbZrFXJXQGRdBao=
# =LxwO
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 12:59:48 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu:
hw/net:ftgmac100: fix coding style
aspeed/sdmc: Remove extra R_MAIN_STATUS case
aspeed/soc: Fix possible divide by zero
aspeed/sdmc: Check RAM size value at realize time
aspeed: Deprecate the tacoma-bmc machine
hw/gpio/aspeed: Add reg_table_count to AspeedGPIOClass
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----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=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-48-philmd@linaro.org>
The CSD::CSR_IMP bit defines whether the Driver Stage
Register (DSR) is implemented or not. We do not set
this bit in CSD:
static void sd_set_csd(SDState *sd, uint64_t size)
{
...
if (size <= SDSC_MAX_CAPACITY) { /* Standard Capacity SD */
...
sd->csd[6] = 0xe0 | /* Partial block for read allowed */
((csize >> 10) & 0x03);
...
} else { /* SDHC */
...
sd->csd[6] = 0x00;
...
}
...
}
The sd_normal_command() switch case for the SEND_DSR
command do nothing and fallback to "illegal command".
Since the command is mandatory (although the register
isn't...) call the sd_cmd_unimplemented() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-43-philmd@linaro.org>
Store the command class altogether with the other command
fields (handler, name and type).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-42-philmd@linaro.org>
Store the command type altogether with the command handler and name.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-41-philmd@linaro.org>
We already have a const array where command handlers
are listed. Store the command name there too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-40-philmd@linaro.org>
Convert array of command handlers to array of structures.
The structure contains the command handler. No logical
change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-39-philmd@linaro.org>
In order to access SDState::SDProto from sd_[a]cmd_name(),
pass SDState as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-38-philmd@linaro.org>
Merge sdmmc-internal.c into sd.c by moving
sd_cmd_name() and sd_acmd_name() and updating
meson.build.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-37-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-33-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-32-philmd@linaro.org>
In order to modify the WRITE_SINGLE_BLOCK case in the
next commit, duplicate it first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-31-philmd@linaro.org>
All commands switching from TRANSFER state to (receiving)DATA
do the same: receive stream of data from the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_receivingdata() on the I/O line setup the data to
be received on the data[] buffer,
- sd_generic_write_byte() on the DAT lines to push the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-30-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-29-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-27-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-24-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-23-philmd@linaro.org>
In order to modify the READ_SINGLE_BLOCK case in the
next commit, duplicate it first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-22-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-21-philmd@linaro.org>
All commands switching from TRANSFER state to (sending)DATA
do the same: send stream of data on the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_sendingdata() on the I/O line setup the data to
be transferred,
- sd_generic_read_byte() on the DAT lines to fetch the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <4c9f7f51-83ee-421a-8690-9af2e80b134b@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240628070216.92609-18-philmd@linaro.org>
Extract sd_blk_len() helper, use definitions instead
of magic values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-15-philmd@linaro.org>
Keep direct reference to SDProto in SDState,
remove then unnecessary sd_proto().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-14-philmd@linaro.org>
Card entering sd_inactive_state powers off, and won't respond
anymore. Handle that once when entering sd_do_command().
Remove condition always true in sd_cmd_GO_IDLE_STATE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-12-philmd@linaro.org>
SDCardStates enum values are specified, so assign them
correspondingly. It will be useful later when we add
states from later specs, which might not be continuous.
See CURRENT_STATE bits in section 4.10.1 "Card Status".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-11-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol), 4.3.4 "Data Write"
and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-9-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol) and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-8-philmd@linaro.org>
SWITCH_FUNCTION is only allowed in TRANSFER state
(See 4.8 "Card State Transition Table).
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-13-philmd@linaro.org>
The initial virtio-net-ccw devices currently do not have a proper parent
in the QOM tree, so they show up under /machine/unattached - which is
somewhat ugly. Let's attach them to /machine/virtual-css-bridge/virtual-css
instead.
Message-ID: <20240701200108.154271-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-6-philmd@linaro.org>
Useful to detect out of bound accesses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-5-philmd@linaro.org>
The command is selected on the I/O lines, and further
processing might be done on the DAT lines via the
sd_read_byte() and sd_write_byte() handlers. Since
these methods can't distinct between normal and APP
commands, keep the name of the current command in
the SDState and use it in the DAT handlers. This
fixes a bug that all normal commands were displayed
as APP commands.
Fixes: 2ed61fb57b ("sdcard: Display command name when tracing CMD/ACMD")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-4-philmd@linaro.org>
Migration of a s390x guest with TCG was long known to be very unstable,
so the tests in tests/qtest/migration-test.c are disabled if running
with TCG instead of KVM.
Nicholas Piggin did a great analysis of the problem:
"The flic pending state is not migrated, so if the machine is migrated
while an interrupt is pending, it can be lost. This shows up in
qtest migration test, an extint is pending (due to console writes?)
and the CPU waits via s390_cpu_set_psw and expects the interrupt to
wake it. However when the flic pending state is lost, s390_cpu_has_int
returns false, so s390_cpu_exec_interrupt falls through to halting
again."
Thus let's finally migrate the pending state, and to be on the safe
side, also the other state variables of the QEMUS390FLICState structure.
Message-ID: <20240619144421.261342-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Coverity reports that the newly added 'case R_MAIN_STATUS' is DEADCODE
because it can not be reached. This is because R_MAIN_STATUS is handled
before in the "Unprotected registers" switch statement. Remove it.
Fixes: Coverity CID 1547112
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Rewrote commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Coverity reports a possible DIVIDE_BY_ZERO issue regarding the
"ram_size" object property. This can not happen because RAM has
predefined valid sizes per SoC. Nevertheless, add a test to
close the issue.
Fixes: Coverity CID 1547113
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Rewrote commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The RAM size of the SDMC device is validated for the SoC and set when
the Aspeed machines are initialized and then later used by several
SoC implementations. However, the SDMC model never checks that the RAM
size has been actually set before being used. Do that at realize.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Jamin_lin < jamin_lin@aspeedtech.com>
The tacoma-bmc machine was a board including an AST2600 SoC based BMC
and a witherspoon like OpenPOWER system. It was used for bring up of
the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc
machine which is part of a real product offering.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ASan detected a global-buffer-overflow error in the aspeed_gpio_read()
function. This issue occurred when reading beyond the bounds of the
reg_table.
To enhance the safety and maintainability of the Aspeed GPIO code, this commit
introduces a reg_table_count member to the AspeedGPIOClass structure. This
change ensures that the size of the GPIO register table is explicitly tracked
and initialized, reducing the risk of errors if new register tables are
introduced in the future.
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine ast1030-evb -qtest stdio
readq 0x7e780272
EOF
ASAN log indicating the issue:
==2602930==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55a5da29e128 at pc 0x55a5d700dc62 bp 0x7fff096c4e90 sp 0x7fff096c4e88
READ of size 2 at 0x55a5da29e128 thread T0
#0 0x55a5d700dc61 in aspeed_gpio_read hw/gpio/aspeed_gpio.c:564:14
#1 0x55a5d933f3ab in memory_region_read_accessor system/memory.c:445:11
#2 0x55a5d92fba40 in access_with_adjusted_size system/memory.c:573:18
#3 0x55a5d92f842c in memory_region_dispatch_read1 system/memory.c:1426:16
#4 0x55a5d92f7b68 in memory_region_dispatch_read system/memory.c:1459:9
#5 0x55a5d9376ad1 in flatview_read_continue_step system/physmem.c:2836:18
#6 0x55a5d9376399 in flatview_read_continue system/physmem.c:2877:19
#7 0x55a5d93775b8 in flatview_read system/physmem.c:2907:12
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2355
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
hw/hw.h only contains the prototype of hw_error() nowadays, so
files that don't use this function don't need to include this
header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240701132649.58345-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This prevents the IRQs from being leaked when the macio IDE device is used.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240628160334.653168-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The automatic deprecation mechanism introduced in the preceeding patches
will mark every i440fx machine upto and including 2.12 as deprecated. As
such we can revert the manually added deprecation introduced in:
commit 792b4fdd4e
Author: Philippe Mathieu-Daudé <philmd@linaro.org>
Date: Wed Feb 28 10:34:35 2024 +0100
hw/i386/pc: Deprecate 2.4 to 2.12 pc-i440fx machines
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-14-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The automatic deprecation mechanism introduced in the preceeding patches
will mark every spapr machine upto and including 2.12 as deprecated. As
such we can revert the manually added deprecation which was a subset:
commit 1392617d35
Author: Cédric Le Goater <clg@kaod.org>
Date: Tue Jan 23 16:37:02 2024 +1000
spapr: Tag pseries-2.1 - 2.11 machines as deprecated
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-13-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DELETION() macro in the machine type
registration method, so that when a versioned machine type reaches
the end of its life, it is no longer registered with QOM and thus
cannot be used.
The actual definition of the machine type should be deleted at
this point, but experience shows that can easily be forgotten.
By skipping registration the manual code deletion task can be
done at any later date.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-12-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DEPRECATION() macro in the definition of
all machine type classes which support versioning. This ensures
that they will automatically get deprecation info set when they
reach the appropriate point in their lifecycle.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-11-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_Q35_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
The added benefit is that it avoids the need to repeat the
version number thrice in three different formats in the calls
to DEFINE_Q35_MACHINE.
Due to the odd-ball '4.0.1' machine type version, this
commit introduces a DEFINE_Q35_BUGFIX helper, to allow
defining of "bugfix" machine types which have a three
digit version.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-8-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_I440FX_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
The added benefit is that it avoids the need to repeat the
version number thrice in three different formats in the calls
to DEFINE_I440FX_MACHINE.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-7-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_VIRT_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
A DEFINE_VIRT_MACHINE_AS_LATEST helper is added so that it
is not required to pass 'false' for every single historical
machine type.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-6-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_SPAPR_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
The added benefit is that it avoids the need to repeat the
version number twice in two different formats in the calls
to DEFINE_SPAPR_MACHINE.
A DEFINE_SPAPR_MACHINE_AS_LATEST helper is added so that it
is not required to pass 'false' for every single historical
machine type.
Due to the odd-ball '2.12-sxxm' machine type version, this
commit introduces a DEFINE_SPAPR_MACHINE_TAGGED helper to
allow defining of "tagged" machine types which have a string
suffix.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240620165742.1711389-5-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_CCW_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
The added benefit is that it avoids the need to repeat the
version number twice in two different formats in the calls
to DEFINE_CCW_MACHINE.
A DEFINE_CCW_MACHINE_AS_LATEST helper is added so that it
is not required to pass 'false' for every single historical
machine type.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-4-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_VIRT_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-3-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Pointer, returned from function 'spapr_vio_find_by_reg',
may be NULL and is dereferenced immediately after.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Oleg Sviridov <oleg.sviridov@red-soft.ru>
Message-ID: <20240531073636.3779559-1-oleg.sviridov@red-soft.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
A crash found while fuzzing device virtio-net-socket-check-used.
Assertion "offset == 0" in iov_copy() fails if less than guest_hdr_len bytes
were transmited.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-Id: <20240613143529.602591-2-frolov@swemel.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VHOST_USER_SET_LOG_BASE requests should be categorized into
non-vring specific messages, and should be sent only once.
If send more than once, dpdk will munmap old log_addr which may has been used and cause segmentation fault.
Signed-off-by: BillXiang <xiangwencheng@dayudpu.com>
Message-Id: <20240613065150.3100-1-xiangwencheng@dayudpu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
