This commit make use of the resettable API to reset the device being
hotplugged when it is realized. Also it ensures it is put in a reset
state coherent with the parent it is plugged into.
Note that there is a difference in the reset. Instead of resetting
only the hotplugged device, we reset also its subtree (switch to
resettable API). This is not expected to be a problem because
sub-buses are just realized too. If a hotplugged device has any
sub-buses it is logical to reset them too at this point.
The recently added should_be_hidden and PCI's partially_hotplugged
mechanisms do not interfere with realize operation:
+ In the should_be_hidden use case, device creation is
delayed.
+ The partially_hotplugged mechanism prevents a device to be
unplugged and unrealized from qdev POV and unrealized.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In qdev_set_parent_bus(), when changing the parent bus of a
realized device, if the source and destination buses are not in the
same reset state, some adaptations are required. This patch adds
needed call to resettable_change_parent() to make sure a device reset
state stays coherent with its parent bus.
The addition is a no-op if:
1. the device being parented is not realized.
2. the device is realized, but both buses are not under reset.
Case 2 means that as long as qdev_set_parent_bus() is called
during the machine realization procedure (which is before the
machine reset so nothing is in reset), it is a no op.
There are 52 call sites of qdev_set_parent_bus(). All but one fall
into the no-op case:
+ 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/
{vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device
parent bus just before realizing the same vdev(vgpu).
+ hw/core/qdev.c: when creating a device in qdev_try_create()
+ hw/core/sysbus.c: when initializing a device in the sysbus
+ hw/i386/amd_iommu.c: before realizing AMDVIState/pci
+ hw/isa/piix4.c: before realizing PIIX4State/rtc
+ hw/misc/auxbus.c: when creating an AUXBus
+ hw/misc/auxbus.c: when creating an AUXBus child
+ hw/misc/macio/macio.c: when initializing a MACIOState child
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda
+ hw/net/virtio-net.c: Used for migration when using the failover
mechanism to migration a vfio-pci/net. It is
a no-op because at this point the device is
already on the bus.
+ hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root
+ hw/pci-host/gpex.c: before realizing GPEXHost/root
+ hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev
+ hw/pci-host/q35.c: before realizing Q35PCIHost/mch
+ hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev
+ hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root
+ hw/s390x/event-facility.c: when creating SCLPEventFacility/
TYPE_SCLP_QUIESCE
+ hw/s390x/event-facility.c: ditto with SCLPEventFacility/
TYPE_SCLP_CPU_HOTPLUG
+ hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice
just after realizing it. Ok because at this point the destination
bus (sysbus) is not in reset; the realize step is before the
machine reset.
+ hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below.
+ hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs
line in ssi_auto_connect_slave(). Ok because this function is only
used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c,
hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c.
+ hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device
+ qdev-monitor.c: in device hotplug creation procedure before realize
Note that this commit alone will have no effect, right now there is no
use of resettable API to reset anything. So a bus will never be tagged
as in-reset by this same API.
The one place where side-effect will occurs is in hw/sd/core.c in
sdbus_reparent_card(). This function is only used in the raspi machines,
including during the sysbus reset procedure. This case will be
carrefully handled when doing the multiple phase reset transition.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a function resettable_change_parent() to do the required
plumbing when changing the parent a of Resettable object.
We need to make sure that the reset state of the object remains
coherent with the reset state of the new parent.
We make the 2 following hypothesis:
+ when an object is put in a parent under reset, the object goes in
reset.
+ when an object is removed from a parent under reset, the object
leaves reset.
The added function avoids any glitch if both old and new parent are
already in reset.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds support of Resettable interface to buses and devices:
+ ResettableState structure is added in the Bus/Device state
+ Resettable methods are implemented.
+ device/bus_is_in_reset function defined
This commit allows to transition the objects to the new
multi-phase interface without changing the reset behavior at all.
Object single reset method can be split into the 3 different phases
but the 3 phases are still executed in a row for a given object.
From the qdev/qbus reset api point of view, nothing is changed.
qdev_reset_all() and qbus_reset_all() are not modified as well as
device_legacy_reset().
Transition of an object must be done from parent class to child class.
Care has been taken to allow the transition of a parent class
without requiring the child classes to be transitioned at the same
time. Note that SysBus and SysBusDevice class do not need any transition
because they do not override the legacy reset method.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit defines an interface allowing multi-phase reset. This aims
to solve a problem of the actual single-phase reset (built in
DeviceClass and BusClass): reset behavior is dependent on the order
in which reset handlers are called. In particular doing external
side-effect (like setting an qemu_irq) is problematic because receiving
object may not be reset yet.
The Resettable interface divides the reset in 3 well defined phases.
To reset an object tree, all 1st phases are executed then all 2nd then
all 3rd. See the comments in include/hw/resettable.h for a more complete
description. The interface defines 3 phases to let the future
possibility of holding an object into reset for some time.
The qdev/qbus reset in DeviceClass and BusClass will be modified in
following commits to use this interface. A mechanism is provided
to allow executing a transitional reset handler in place of the 2nd
phase which is executed in children-then-parent order inside a tree.
This will allow to transition devices and buses smoothly while
keeping the exact current qdev/qbus reset behavior for now.
Documentation will be added in a following commit.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds trace events to reset procedure and when updating the parent
bus of a device.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a temporary device_legacy_reset function doing what
device_reset does to prepare for the transition with Resettable
API.
All occurrence of device_reset in the code tree are also replaced
by device_legacy_reset.
The new resettable API has different prototype and semantics
(resetting child buses as well as the specified device). Subsequent
commits will make the changeover for each call site individually; once
that is complete device_legacy_reset() will be removed.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The num-lines property of the TYPE_OR_GATE device sets the number
of input lines it has. An assert() in or_irq_realize() restricts
this to the maximum supported by the implementation. However we
got the condition in the assert wrong: it should be using <=,
because num-lines == MAX_OR_LINES is permitted, and means that
all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array
are used.
We didn't notice this previously because no user has so far
needed that many input lines.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200120142235.10432-1-peter.maydell@linaro.org
While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and, with this patch,
this is enabled by reading the field 'e_flags' of the ELF header of
the executable in question. The change expands functionality of
the following functions:
- load_elf()
- load_elf_as()
- load_elf_ram()
- load_elf_ram_sym()
The argument added to these functions is called 'pflags' and is of
type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word'
being the type of the field 'e_flags', in both 32-bit and 64-bit
variants of ELF header). Callers are allowed to pass NULL as that
argument, and in such case no lookup to the field 'e_flags' will
happen, and no information will be returned, of course.
CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
CC: Michael Walle <michael@walle.cc>
CC: Thomas Huth <huth@tuxfamily.org>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
CC: Aurelien Jarno <aurelien@aurel32.net>
CC: Jia Liu <proljc@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: BALATON Zoltan <balaton@eik.bme.hu>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
CC: Fabien Chouteau <chouteau@adacore.com>
CC: KONRAD Frederic <frederic.konrad@adacore.com>
CC: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
Use class properties facilities to add properties to the class during
device_class_set_props().
qdev_property_add_static() must be adapted as PropertyInfo now
operates with classes (and not instances), so we must
set_default_value() on the ObjectProperty, before calling its init()
method on the object instance.
Also, PropertyInfo.create() is now exclusively used for class
properties. Fortunately, qdev_property_add_static() is only used in
target/arm/cpu.c so far, which doesn't use "link" properties (that
require create()).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-22-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the one-user function to the place it is being used.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200110153039.1379601-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers use error_abort, and even the function itself calls with
error_abort.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is already documented in the header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To ease review/modifications of this Makefile, group generic
objects first, then system-mode specific ones, and finally
peripherals (which are only used in system-mode).
No logical changes introduced here.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200118140619.26333-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The user-mode code does not use this API, restrict it
to the system-mode.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200118140619.26333-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similarly to what we already do with qdev, use a helper to overload the
reset QOM methods of the parent in children classes, for clarity.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <157650847239.354886.2782881118916307978.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-redir.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-3-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-host.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-2-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
-----BEGIN PGP SIGNATURE-----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=iYVd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/prop-ptr-pull-request' into staging
Clean-ups: qom-ify serial and remove QDEV_PROP_PTR
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
# gpg: Signature made Tue 07 Jan 2020 15:01:26 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/prop-ptr-pull-request: (37 commits)
qdev/qom: remove some TODO limitations now that PROP_PTR is gone
qdev: remove QDEV_PROP_PTR
qdev: remove PROP_MEMORY_REGION
omap-gpio: remove PROP_PTR
omap-i2c: remove PROP_PTR
omap-intc: remove PROP_PTR
smbus-eeprom: remove PROP_PTR
cris: improve passing PIC interrupt vector to the CPU
mips/cps: fix setting saar property
qdev: use g_strcmp0() instead of open-coding it
leon3: use qdev gpio facilities for the PIL
leon3: use qemu_irq framework instead of callback as property
dp8393x: replace PROP_PTR with PROP_LINK
etraxfs: remove PROP_PTR usage
lance: replace PROP_PTR with PROP_LINK
vmmouse: replace PROP_PTR with PROP_LINK
sm501: make SerialMM a child, export chardev property
mips: use sysbus_mmio_get_region() instead of internal fields
mips: use sysbus_add_io()
mips: baudbase is 115200 by default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl4TaMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpvzgH/2LyDAzCa9h93ikSJjmyUk5FUaqve38daEb3
S3JYjwKxQx7u1ydooKhvBQnBCZ2i3S+k62gfYyKB+nBv8xvjs0Eg5D1YJ5E8hciy
lf5OFGWWtX2iPDjZwQwT13kiJe0o3JRGxJJ6XqTEG+1EYOp7cky/FEv4PD030b9m
I2wROZ/Am+onB9YJX8c0Vv1CG+AryuJNXnvwQzTXEjj4U7bEYUyJwVZaCRyAdWQ3
uYXIZN9VwjVX6BFvy9ZAJbEsUVJvOM1/aQaDqcrLz+VlzRT7bRkKHi2G3vakrm1I
r5OpgyLo84132awCncbSykKDH5o8WaxLaJBjGmuBfasMz9wPzAg=
=uL1o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: fixes, features
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (32 commits)
intel_iommu: add present bit check for pasid table entries
intel_iommu: a fix to vtd_find_as_from_bus_num()
virtio-net: delete also control queue when TX/RX deleted
virtio: reset region cache when on queue deletion
virtio-mmio: update queue size on guest write
tests: add virtio-scsi and virtio-blk seg_max_adjust test
virtio: make seg_max virtqueue size dependent
hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
vhost-user-scsi: reset the device if supported
vhost-user: add VHOST_USER_RESET_DEVICE to reset devices
hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument
hw/pci/pci_host: Remove redundant PCI_DPRINTF()
virtio-mmio: Clear v2 transport state on soft reset
ACPI: add expected files for HMAT tests (acpihmat)
tests/bios-tables-test: add test cases for ACPI HMAT
tests/numa: Add case for QMP build HMAT
hmat acpi: Build Memory Side Cache Information Structure(s)
hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
numa: Extend CLI to provide memory side cache information
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No longer used in the tree. The comment about user_creatable is still
quite relevant, but there is already a similar comment in qdev-core.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
-----BEGIN PGP SIGNATURE-----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=M4kD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/dbus-vmstate7-pull-request' into staging
Add dbus-vmstate
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
# gpg: Signature made Mon 06 Jan 2020 14:43:35 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/dbus-vmstate7-pull-request:
tests: add dbus-vmstate-test
tests: add migration-helpers unit
dockerfiles: add dbus-daemon to some of latest distributions
configure: add GDBUS_CODEGEN
Add dbus-vmstate object
util: add dbus helper unit
docs: start a document to describe D-Bus usage
vmstate: replace DeviceState with VMStateIf
vmstate: add qom interface to get id
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before the patch, seg_max parameter was immutable and hardcoded
to 126 (128 - 2) without respect to queue size. This has two negative effects:
1. when queue size is < 128, we have Virtio 1.1 specfication violation:
(2.6.5.3.1 Driver Requirements) seq_max must be <= queue_size.
This violation affects the old Linux guests (ver < 4.14). These guests
crash on these queue_size setups.
2. when queue_size > 128, as was pointed out by Denis Lunev <den@virtuozzo.com>,
seg_max restrics guest's block request length which affects guests'
performance making them issues more block request than needed.
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
To mitigate this two effects, the patch adds the property adjusting seg_max
to queue size automaticaly. Since seg_max is a guest visible parameter,
the property is machine type managable and allows to choose between
old (seg_max = 126 always) and new (seg_max = queue_size - 2) behaviors.
Not to change the behavior of the older VMs, prevent setting the default
seg_max_adjust value for older machine types.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-2-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace DeviceState dependency with VMStateIf on vmstate API.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Add an interface to get the instance id, instead of depending on
Device and qdev_get_dev_path().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add -numa hmat-cache option to provide Memory Side Cache Information.
These memory attributes help to build Memory Side Cache Information
Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT).
Before using hmat-cache option, enable HMAT with -machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-4-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add -numa hmat-lb option to provide System Locality Latency and
Bandwidth Information. These memory attributes help to build
System Locality Latency and Bandwidth Information Structure(s)
in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using
hmat-lb option, enable HMAT with -machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-3-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT),
The initiator represents processor which access to memory. And in 5.2.27.3
Memory Proximity Domain Attributes Structure, the attached initiator is
defined as where the memory controller responsible for a memory proximity
domain. With attached initiator information, the topology of heterogeneous
memory can be described. Add new machine property 'hmat' to enable all
HMAT specific options.
Extend CLI of "-numa node" option to indicate the initiator numa node-id.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report
the platform's HMAT tables. Before using initiator option, enable HMAT with
-machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-2-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the SLOF firmware for pseries guests will disable/re-enable
a PCI device multiple times via IO/MEM/MASTER bits of PCI_COMMAND
register after the initial probe/feature negotiation, as it tends to
work with a single device at a time at various stages like probing
and running block/network bootloaders without doing a full reset
in-between.
In QEMU, when PCI_COMMAND_MASTER is disabled we disable the
corresponding IOMMU memory region, so DMA accesses (including to vring
fields like idx/flags) will no longer undergo the necessary
translation. Normally we wouldn't expect this to happen since it would
be misbehavior on the driver side to continue driving DMA requests.
However, in the case of pseries, with iommu_platform=on, we trigger the
following sequence when tearing down the virtio-blk dataplane ioeventfd
in response to the guest unsetting PCI_COMMAND_MASTER:
#2 0x0000555555922651 in virtqueue_map_desc (vdev=vdev@entry=0x555556dbcfb0, p_num_sg=p_num_sg@entry=0x7fffe657e1a8, addr=addr@entry=0x7fffe657e240, iov=iov@entry=0x7fffe6580240, max_num_sg=max_num_sg@entry=1024, is_write=is_write@entry=false, pa=0, sz=0)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:757
#3 0x0000555555922a89 in virtqueue_pop (vq=vq@entry=0x555556dc8660, sz=sz@entry=184)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:950
#4 0x00005555558d3eca in virtio_blk_get_request (vq=0x555556dc8660, s=0x555556dbcfb0)
at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:255
#5 0x00005555558d3eca in virtio_blk_handle_vq (s=0x555556dbcfb0, vq=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:776
#6 0x000055555591dd66 in virtio_queue_notify_aio_vq (vq=vq@entry=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1550
#7 0x000055555591ecef in virtio_queue_notify_aio_vq (vq=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1546
#8 0x000055555591ecef in virtio_queue_host_notifier_aio_poll (opaque=0x555556dc86c8)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:2527
#9 0x0000555555d02164 in run_poll_handlers_once (ctx=ctx@entry=0x55555688bfc0, timeout=timeout@entry=0x7fffe65844a8)
at /home/mdroth/w/qemu.git/util/aio-posix.c:520
#10 0x0000555555d02d1b in try_poll_mode (timeout=0x7fffe65844a8, ctx=0x55555688bfc0)
at /home/mdroth/w/qemu.git/util/aio-posix.c:607
#11 0x0000555555d02d1b in aio_poll (ctx=ctx@entry=0x55555688bfc0, blocking=blocking@entry=true)
at /home/mdroth/w/qemu.git/util/aio-posix.c:639
#12 0x0000555555d0004d in aio_wait_bh_oneshot (ctx=0x55555688bfc0, cb=cb@entry=0x5555558d5130 <virtio_blk_data_plane_stop_bh>, opaque=opaque@entry=0x555556de86f0)
at /home/mdroth/w/qemu.git/util/aio-wait.c:71
#13 0x00005555558d59bf in virtio_blk_data_plane_stop (vdev=<optimized out>)
at /home/mdroth/w/qemu.git/hw/block/dataplane/virtio-blk.c:288
#14 0x0000555555b906a1 in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:245
#15 0x0000555555b90dbb in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:237
#16 0x0000555555b92a8e in virtio_pci_stop_ioeventfd (proxy=0x555556db4e40)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:292
#17 0x0000555555b92a8e in virtio_write_config (pci_dev=0x555556db4e40, address=<optimized out>, val=1048832, len=<optimized out>)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:613
I.e. the calling code is only scheduling a one-shot BH for
virtio_blk_data_plane_stop_bh, but somehow we end up trying to process
an additional virtqueue entry before we get there. This is likely due
to the following check in virtio_queue_host_notifier_aio_poll:
static bool virtio_queue_host_notifier_aio_poll(void *opaque)
{
EventNotifier *n = opaque;
VirtQueue *vq = container_of(n, VirtQueue, host_notifier);
bool progress;
if (!vq->vring.desc || virtio_queue_empty(vq)) {
return false;
}
progress = virtio_queue_notify_aio_vq(vq);
namely the call to virtio_queue_empty(). In this case, since no new
requests have actually been issued, shadow_avail_idx == last_avail_idx,
so we actually try to access the vring via vring_avail_idx() to get
the latest non-shadowed idx:
int virtio_queue_empty(VirtQueue *vq)
{
bool empty;
...
if (vq->shadow_avail_idx != vq->last_avail_idx) {
return 0;
}
rcu_read_lock();
empty = vring_avail_idx(vq) == vq->last_avail_idx;
rcu_read_unlock();
return empty;
but since the IOMMU region has been disabled we get a bogus value (0
usually), which causes virtio_queue_empty() to falsely report that
there are entries to be processed, which causes errors such as:
"virtio: zero sized buffers are not allowed"
or
"virtio-blk missing headers"
and puts the device in an error state.
This patch works around the issue by introducing virtio_set_disabled(),
which sets a 'disabled' flag to bypass checks like virtio_queue_empty()
when bus-mastering is disabled. Since we'd check this flag at all the
same sites as vdev->broken, we replace those checks with an inline
function which checks for either vdev->broken or vdev->disabled.
The 'disabled' flag is only migrated when set, which should be fairly
rare, but to maintain migration compatibility we disable it's use for
older machine types. Users requiring the use of the flag in conjunction
with older machine types can set it explicitly as a virtio-device
option.
NOTES:
- This leaves some other oddities in play, like the fact that
DRIVER_OK also gets unset in response to bus-mastering being
disabled, but not restored (however the device seems to continue
working)
- Similarly, we disable the host notifier via
virtio_bus_stop_ioeventfd(), which seems to move the handling out
of virtio-blk dataplane and back into the main IO thread, and it
ends up staying there till a reset (but otherwise continues working
normally)
Cc: David Gibson <david@gibson.dropbear.id.au>,
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20191120005003.27035-1-mdroth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit aa57020774, by mistake used MachineClass::numa_mem_supported
to check if NUMA is supported by machine and also as unrelated change
set it to true for sbsa-ref board.
Luckily change didn't break machines that support NUMA, as the field
is set to true for them.
But the field is not intended for checking if NUMA is supported and
will be flipped to false within this release for new machine types.
Fix it:
- by using previously used condition
!mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id
the first time and then use MachineState::numa_state down the road
to check if NUMA is supported
- dropping stray sbsa-ref chunk
Fixes: aa57020774
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1576154936-178362-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently parse_numa_node() is always called from already numa
enabled context.
Drop unnecessary check if numa is supported.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1576154936-178362-2-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename Error ** parameter in check_only_migratable to common errp.
In device_set_realized:
- Move "if (local_err != NULL)" closer to error setters.
- Drop 'Error **local_errp': it doesn't save any LoCs, but it's very
unusual.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-10-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We don't need Error **, as all callers pass local Error object, which
isn't used after the call. Use Error * instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-5-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
fit_load_fdt() passes @errp to fit_image_addr(), then recovers from
ENOENT failures. Passing @errp is wrong, because it works only as
long as @errp is neither @error_fatal nor @error_abort. Error
recovery dereferences @errp. That's also wrong; see the big comment
in error.h. Error recovery can leave *errp pointing to a freed
Error object. Wrong, it must be null on success. Messed up in
commit 3eb99edb48 "loader-fit: Wean off error_printf()".
No caller actually passes such values, or uses *errp on success.
Fix anyway: splice in a local Error *err, and error_propagate().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The first machine property to fall is Xen's Intel integrated graphics
passthrough. The "-machine igd-passthru" option does not set anymore
a property on the machine object, but desugars to a GlobalProperty on
accelerator objects.
The setter is very simple, since the value ends up in a
global variable, so this patch also provides an example before the more
complicated cases that follow it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "accel" property from MachineState, and instead desugar
"-machine accel=" to a list of "-accel" options.
This has a semantic change due to removing merge_lists from -accel.
For example:
- "-accel kvm -accel tcg" all but ignored "-accel kvm". This is a bugfix.
- "-accel kvm -accel thread=single" ignored "thread=single", since it
applied the option to KVM. Now it fails due to not specifying the
accelerator on "-accel thread=single".
- "-accel tcg -accel thread=single" chose single-threaded TCG, while now
it will fail due to not specifying the accelerator on "-accel
thread=single".
Also, "-machine accel" and "-accel" become incompatible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Virtio spec 1.1 (and earlier), 5.2.5.2 Driver Requirements: Device
Initialization:
"Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it if
they offer VIRTIO_BLK_F_CONFIG_WCE"
Currently F_CONFIG_WCE and F_WCE are not connected to each other.
Qemu will advertise F_CONFIG_WCE if config-wce argument is
set for virtio-blk device. And F_WCE is advertised only if
underlying block backend actually has it's caching enabled.
Fix this by advertising F_WCE if F_CONFIG_WCE is also advertised.
To preserve backwards compatibility with newer machine types make this
behaviour governed by "x-enable-wce-if-config-wce" virtio-blk-device
property and introduce hw_compat_4_2 with new property being off by
default for all machine types <= 4.2 (but don't introduce 4.3
machine type itself yet).
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1572978137-189218-1-git-send-email-wrfsh@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If memory allocation fails when using -mem-path, QEMU is supposed to print
out a message to indicate that fallback to anonymous RAM is deprecated. This
is done with error_printf() which does output buffering. As a consequence,
the message is only printed at the next flush, eg. when quiting QEMU, and
it also lacks a trailing newline:
qemu-system-ppc64: unable to map backing store for guest RAM: Cannot allocate memory
qemu-system-ppc64: warning: falling back to regular RAM allocation
QEMU 4.1.50 monitor - type 'help' for more information
(qemu) q
This is deprecated. Make sure that -mem-path specified path has sufficient resources to allocate -m specified RAM amountgreg@boss02:~/Work/qemu/qemu-spapr$
Add the missing \n to fix both issues.
Fixes: cb79224b7e "deprecate -mem-path fallback to anonymous RAM"
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <157304440026.351774.14607704217028190097.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now all the users of ptimers have converted to the transaction-based
API, we can remove ptimer_init_with_bh() and all the code paths
that are used only by bottom-half based ptimers, and tidy up the
documentation comments to consider the transaction-based API the
only possibility.
The code changes result from:
* s->bh no longer exists
* s->callback is now always non-NULL
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191025142411.17085-1-peter.maydell@linaro.org
This function isn't used anymore.
This reverts commit 22ec3283ef.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Esteban Bosse <estebanbosse@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In "b06424de62 migration: Disable hotplug/unplug during migration" we
added a check to disable unplug for all devices until we have figured
out what works. For failover primary devices qdev_unplug() is called
from the migration handler, i.e. during migration.
This patch adds a flag to DeviceState which is set to false for all
devices and makes an exception for PCI devices that are also
primary devices in a failover pair.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-8-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for hiding a device to the qbus and qdev APIs. The
first user of this will be the virtio-net failover feature but the API
introduced with this patch could be used to implement other features as
well, for example hiding pci devices when a pci bus is powered off.
qdev_device_add() is modified to check for a failover_pair_id
argument in the option string. A DeviceListener callback
should_be_hidden() is added. It can be used by a standby device to
inform qdev that this device should not be added now. The standby device
handler can store the device options to plug the device in at a later
point in time.
One reason for hiding the device is that we don't want to expose both
devices to the guest kernel until the respective virtio feature bit
VIRTIO_NET_F_STANDBY was negotiated and we know that the devices will be
handled correctly by the guest.
More information on the kernel feature this is using:
https://www.kernel.org/doc/html/latest/networking/net_failover.html
An example where the primary device is a vfio-pci device and the standby
device is a virtio-net device:
A device is hidden when it has an "failover_pair_id" option, e.g.
-device virtio-net-pci,...,failover=on,...
-device vfio-pci,...,failover_pair_id=net1,...
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-2-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add MachineClass::auto_enable_numa field. When it is true, a NUMA node
is expected to be created implicitly.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190905083238.1799-1-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Provide the new transaction-based API. If a ptimer is created
using ptimer_init() rather than ptimer_init_with_bh(), then
instead of providing a QEMUBH, it provides a pointer to the
callback function directly, and has opted into the transaction
API. All calls to functions which modify ptimer state:
- ptimer_set_period()
- ptimer_set_freq()
- ptimer_set_limit()
- ptimer_set_count()
- ptimer_run()
- ptimer_stop()
must be between matched calls to ptimer_transaction_begin()
and ptimer_transaction_commit(). When ptimer_transaction_commit()
is called it will evaluate the state of the timer after all the
changes in the transaction, and call the callback if necessary.
In the old API the individual update functions generally would
call ptimer_trigger() immediately, which would schedule the QEMUBH.
In the new API the update functions will instead defer the
"set s->next_event and call ptimer_reload()" work to
ptimer_transaction_commit().
Because ptimer_trigger() can now immediately call into the
device code which may then call other ptimer functions that
update ptimer_state fields, we must be more careful in
ptimer_reload() not to cache fields from ptimer_state across
the ptimer_trigger() call. (This was harmless with the QEMUBH
mechanism as the BH would not be invoked until much later.)
We use assertions to check that:
* the functions modifying ptimer state are not called outside
a transaction block
* ptimer_transaction_begin() and _commit() calls are paired
* the transaction API is not used with a QEMUBH ptimer
There is some slight repetition of code:
* most of the set functions have similar looking "if s->bh
call ptimer_reload, otherwise set s->need_reload" code
* ptimer_init() and ptimer_init_with_bh() have similar code
We deliberately don't try to avoid this repetition, because
it will all be deleted when the QEMUBH version of the API
is removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
Currently the ptimer design uses a QEMU bottom-half as its
mechanism for calling back into the device model using the
ptimer when the timer has expired. Unfortunately this design
is fatally flawed, because it means that there is a lag
between the ptimer updating its own state and the device
callback function updating device state, and guest accesses
to device registers between the two can return inconsistent
device state.
We want to replace the bottom-half design with one where
the guest device's callback is called either immediately
(when the ptimer triggers by timeout) or when the device
model code closes a transaction-begin/end section (when the
ptimer triggers because the device model changed the
ptimer's count value or other state). As the first step,
rename ptimer_init() to ptimer_init_with_bh(), to free up
the ptimer_init() name for the new API. We can then convert
all the ptimer users away from ptimer_init_with_bh() before
removing it entirely.
(Commit created with
git grep -l ptimer_init | xargs sed -i -e 's/ptimer_init/ptimer_init_with_bh/'
and three overlong lines folded by hand.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-2-peter.maydell@linaro.org
Both, "rom->addr" and "addr" are derived from the binary image
that can be loaded with the "-kernel" paramer. The code in
rom_copy() then calculates:
d = dest + (rom->addr - addr);
and uses "d" as destination in a memcpy() some lines later. Now with
bad kernel images, it is possible that rom->addr is smaller than addr,
thus "rom->addr - addr" gets negative and the memcpy() then tries to
copy contents from the image to a bad memory location. This could
maybe be used to inject code from a kernel image into the QEMU binary,
so we better fix it with an additional sanity check here.
Cc: qemu-stable@nongnu.org
Reported-by: Guangming Liu
Buglink: https://bugs.launchpad.net/qemu/+bug/1844635
Message-Id: <20190925130331.27825-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the merge of notdirty handling into store_helper,
the last user of cpu->mem_io_vaddr was removed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adds a trace point which prints every loaded image. This includes
bios/firmware/kernel/initradmdisk/pcirom.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613050937.124903-1-aik@ozlabs.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce this new per-machine hook to give any machine class a chance
to do a sanity check on the to-be-hotplugged device as a sanity test.
This will be used for x86 to try to detect some illegal configuration
of devices, e.g., possible conflictions between vfio-pci and x86
vIOMMU.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a possible integer overflow when we calculate
the total size of ELF segments loaded.
Reported-by: Coverity (CID 1405299)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190910124828.39794-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using FLR becomes convenient in cases where resetting the bus is
impractical, for example, when debugging the behavior of individual
functions.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20190820163005.1880-1-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When user doesn't request any explicit CPU model with libvirt or QEMU,
a machine type specific CPU model is picked. Currently there is no way
to determine what this QEMU built-in default is, so libvirt cannot
report this back to the user in the XML config.
This extends the "query-machines" QMP command so that it reports the
default CPU model typename for each machine.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190822100412.23746-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move existing numa global numa_info (renamed as "nodes") into NumaState.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-5-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move existing numa global have_numa_distance into NumaState.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liu Jingqi <jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-4-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add struct NumaState in MachineState and move existing numa global
nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable
numa_support into MachineClass to decide which submachines support NUMA.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-3-tao3.xu@intel.com>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KtI3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190821-pull-request' into staging
audio: second batch of -audiodev support, adding support for multiple backends.
# gpg: Signature made Wed 21 Aug 2019 09:40:37 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/audio-20190821-pull-request:
audio: fix memory leak reported by ASAN
audio: use size_t where makes sense
audio: remove read and write pcm_ops
paaudio: fix playback glitches
audio: do not run each backend in audio_run
audio: remove audio_MIN, audio_MAX
paaudio: properly disconnect streams in fini_*
paaudio: do not move stream when sink/source name is specified
audio: audiodev= parameters no longer optional when -audiodev present
paaudio: prepare for multiple audiodev
audio: add audiodev properties to frontends
audio: add audiodev property to vnc and wav_capture
audio: basic support for multi backend audio
audio: reduce glob_audio_state usage
audio: Add missing fall through comments
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl1c8bwACgkQbDjKyiDZ
s5Ko6hAA1Y1xOreKTUP9UtAIaipfdasOMOcGYQ+MMovh05Zn0CwmB0uukeIzbnhi
hU3qMue6Q0EAt5F9d9z4YWRZqkgsAOBd7SVHpSouoY6DOtIsL9Tc0jTrpr6z8t0L
j4TYZYlJUybKMocj/8YayTALMZf2myh5A+oxDGPQHqYNWYGCEcttsFbcoeWQbAXG
eXrGDuSzXDXJSKej99ty/tpSjbJXDbRcvMv+v3v6F+tHWhNke3Ku8s7niDy3fIZU
lU1Sbz0/UnjKXpCWI/WRBFFWrr1bYICvKPzjK1tNJgA/HhAp37IIsF/j/5kmmF0Y
dxOCf3kRBhGi5/KKDFrVWwdTiU0CdJ4iF/NvaNlZGZ+oSTZzANz6O/nlAjcBlbt6
nAJRB4irKkDpL0slwDhl+oF73kFXMUokNgqeaMXE03agMapHrHfmxHs7yL5lAnxf
I0hyfAUYTZBc1yd8dxEtmEoFYGE9OXU5jZC4BcV8GcrT1tK3ZVzsALetRF2Sm1wm
wW16B0V6szsDd67cwJdPIs3tR6ZSxX2D6/vhK4mK77TM9TAN7nEMJBFNwjNbnttD
QLRhFnIZQ61Ja+tDI0aV37bSM32Mi43bYRksh2FujgaYpX92Z0QfsDf9NtM9yQab
Ihbq7KJ/bK4m9OvmWTUO4CKrCbnzMEzL+ncFamoO2PcvG9uTk+M=
=E+7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging
ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
ppc: Fix emulated single to double denormalized conversions
ppc: Fix emulated INFINITY and NAN conversions
ppc: conform to processor User's Manual for xscvdpspn
ppc: Add support for 'mffsl' instruction
target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
spapr/xive: Mask the EAS when allocating an IRQ
spapr: Implement better workaround in spapr-vty device
spapr/irq: Drop spapr_irq_msi_reset()
spapr/pci: Free MSIs during reset
spapr/pci: Consolidate de-allocation of MSIs
ppc: remove idle_timer logic
spapr: Implement ibm,suspend-me
i386: use machine class ->wakeup method
machine: Add wakeup method to MachineClass
ppc/xive: Improve 'info pic' support
ppc/xive: Provide silent escalation support
ppc/xive: Provide unconditional escalation support
ppc/xive: Provide escalation support
ppc/xive: Provide backlog support
ppc/xive: Implement TM_PULL_OS_CTX special command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move query-target and its return type TargetInfo from misc.json to
machine.json, where they are covered by MAINTAINERS section "Machine
core". Also move its implementation from arch_init.c to
hw/core/machine-qmp-cmds, where it is likewise covered.
All users of SysEmuTarget are now in machine.json. Move it there from
common.json.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-3-armbru@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
Finally add audiodev= options to audio frontends so users can specify
which backend to use when multiple backends exist. Not specifying an
audiodev= option currently causes the first audiodev to be used, this is
fixed in the next commit.
Example usage: -audiodev pa,id=foo -device AC97,audiodev=foo
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: d64db52dda2d0e9d97bc5ab1dd9adf724280fea1.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add 4.2 machine types for arm/i440fx/q35/s390x/spapr.
For i440fx and q35, unversioned cpu models are still translated
to -v1, as 0788a56bd1 ("i386: Make unversioned CPU models be
aliases") states this should only transition to the latest cpu
model version in 4.3 (or later).
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190724103524.20916-1-cohuck@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 18269069c3 ("migration: Introduce ignore-shared capability")
addes ignore-shared capability to bypass the shared ramblock (e,g,
membackend + numa node). It does good to live migration.
As told by Yury,this commit expectes that QEMU doesn't write to guest RAM
until VM starts, but it does on aarch64 qemu:
Backtrace:
1 0x000055f4a296dd84 in address_space_write_rom_internal () at
exec.c:3458
2 0x000055f4a296de3a in address_space_write_rom () at exec.c:3479
3 0x000055f4a2d519ff in rom_reset () at hw/core/loader.c:1101
4 0x000055f4a2d475ec in qemu_devices_reset () at hw/core/reset.c:69
5 0x000055f4a2c90a28 in qemu_system_reset () at vl.c:1675
6 0x000055f4a2c9851d in main () at vl.c:4552
Actually, on arm64 virt marchine, ramblock "dtb" will be filled into ram
druing rom_reset. In ignore-shared incoming case, this rom filling
is not required since all the data has been stored in memory backend
file.
Further more, as suggested by Peter Xu, if we do rom_reset() now with
these ROMs then the RAM data should be re-filled again too with the
migration stream coming in.
Fixes: commit 18269069c3 ("migration: Introduce ignore-shared
capability")
Suggested-by: Yury Kotov <yury-kotov@yandex-team.ru>
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Catherine Ho <catherine.hecx@gmail.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows handling an ELF memory-mapped, taking care
the reference count of the GMappedFile* passed through
rom_add_elf_program().
In this case, the 'data' pointer is not heap-allocated, so
we cannot free it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190724143105.307042-2-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The generic loader device is completely optional. Let's add a proper
config switch for it so that people can disable it if they don't need
it and want to create a minimalistic QEMU binary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "split-irq" device is currently only used by machines that use
CONFIG_ARMSSE. Let's add a proper CONFIG_SPLIT_IRQ switch for this
so that it only gets compiled when we really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "register" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Message-Id: <20190817101931.28386-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()". This is a bad idea:
hw/qdev-core.h is widely included.
Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.
Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800. A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Commit e35704ba9c "numa: Move NUMA declarations from sysemu.h to
numa.h" left a few NUMA-related macros behind. Move them now.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-26-armbru@redhat.com>
hw/boards.h pulls in almost 60 headers. The less we include it into
headers, the better. As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed. Gets rid of just
one inclusion into a header.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
Some of the generated qapi-types-MODULE.h are included all over the
place. Changing a QAPI type can trigger massive recompiling. Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):
6300 qapi/qapi-builtin-types.h
5700 qapi/qapi-types-run-state.h
3900 qapi/qapi-types-common.h
3300 qapi/qapi-types-sockets.h
3000 qapi/qapi-types-misc.h
3000 qapi/qapi-types-crypto.h
3000 qapi/qapi-types-job.h
3000 qapi/qapi-types-block-core.h
2800 qapi/qapi-types-block.h
1300 qapi/qapi-types-net.h
Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.
This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h. They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO(). Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles. This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.
Improves things for some of the top scorers:
3600 qapi/qapi-types-common.h
2800 qapi/qapi-types-sockets.h
900 qapi/qapi-types-misc.h
2200 qapi/qapi-types-crypto.h
2100 qapi/qapi-types-job.h
2100 qapi/qapi-types-block-core.h
270 qapi/qapi-types-block.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
'edid' is a property of the virtio-gpu base device, so turning
it off on virtio-gpu-pci is not enough (it misses -ccw). Turn
it off on the base device instead.
Fixes: 0a71966253 ("edid: flip the default to enabled")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190806115819.16026-1-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACS got added in 4.0 unconditionally, that broke older<->4.0 migration
where there was a PCIe root port.
Fix this by turning it off for 3.1 and older machines; note this
fixes compatibility for older QEMUs but breaks compatibility with 4.0
for older machine types.
machine type source qemu dest qemu
3.1 3.1 4.0 broken
3.1 3.1 4.1rc2 broken
3.1 3.1 4.1+this OK ++
3.1 4.0 4.1rc2 OK
3.1 4.0 4.1+this broken --
4.0 4.0 4.1rc2 OK
4.0 4.0 4.1+this OK
So we gain and lose; the consensus seems to be treat this as a
fix for older machine types.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190730093719.12958-3-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f2784eed30
since that accidentally removes the PCIe capabilities from virtio
devices because virtio_pci_dc_realize is called before the new 'mode'
flag is set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190729162903.4489-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The PL031 RTC tracks the difference between the guest RTC
and the host RTC using a tick_offset field. For migration,
however, we currently always migrate the offset between
the guest and the vm_clock, even if the RTC clock is not
the same as the vm_clock; this was an attempt to retain
migration backwards compatibility.
Unfortunately this results in the RTC behaving oddly across
a VM state save and restore -- since the VM clock stands still
across save-then-restore, regardless of how much real world
time has elapsed, the guest RTC ends up out of sync with the
host RTC in the restored VM.
Fix this by migrating the raw tick_offset. To retain migration
compatibility as far as possible, we have a new property
migrate-tick-offset; by default this is 'true' and we will
migrate the true tick offset in a new subsection; if the
incoming data has no subsection we fall back to the old
vm_clock-based offset information, so old->new migration
compatibility is preserved. For complete new->old migration
compatibility, the property is set to 'false' for 4.0 and
earlier machine types (this will only affect 'virt-4.0'
and below, as none of the other pl031-using machines are
versioned).
Reported-by: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20190709143912.28905-1-peter.maydell@linaro.org
The virtio-balloon config size changed in QEMU 4.0 even for existing
machine types. Migration from QEMU 3.1 to 4.0 can fail in some
circumstances with the following error:
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: a1 device: 1 cmask: ff wmask: c0 w1cmask:0
This happens because the virtio-balloon config size affects the VIRTIO
Legacy I/O Memory PCI BAR size.
Introduce a qdev property called "qemu-4-0-config-size" and enable it
only for the QEMU 4.0 machine types. This way <4.0 machine types use
the old size, 4.0 uses the larger size, and >4.0 machine types use the
appropriate size depending on enabled virtio-balloon features.
Live migration to and from old QEMUs to QEMU 4.1 works again as long as
a versioned machine type is specified (do not use just "pc"!).
Originally-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190710141440.27635-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Children sometimes depend on their parent's vm change state handler
having completed. Add a vm change state handler API for devices that
guarantees tree depth ordering.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU fails to start if memory-less node is present when memdev
is used
qemu-system-x86_64 -object memory-backend-ram,id=ram0,size=128M \
-numa node -numa node,memdev=ram0
with error:
"memdev option must be specified for either all or no nodes"
which works as expected if legacy 'mem' is used.
Fix check to make memory-less nodes valid when memdev option is used
but still disallow mix of mem and memdev options.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190702140745.27767-2-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will help us avoid spurious warnings during "make check".
Note that this will silence the warnings generated by
tests/numa-test, but not the ones generated by
tests/bios-tables-test. We still need to change
tests/bios-tables-test to use "-numa ...,memdev=" to silence
these warnings.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190702215726.23661-1-ehabkost@redhat.com>
Export machine type deprecation status through the query-machines
QMP command. With this, libvirt and management software will be
able to show this information to users and/or suggest changes to
VM configuration to avoid deprecated machines.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190608233447.27970-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To make smp_parse() more flexible and expansive, a smp_parse function
pointer is added to MachineClass that machine types could override.
The generic smp_parse() code in vl.c is moved to hw/core/machine.c, and
become the default implementation of MachineClass::smp_parse. A PC-specific
function called pc_smp_parse() has been added to hw/i386/pc.c, which in
this patch changes nothing against the default one .
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190620054525.37188-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fallback might affect guest or worse whole host performance
or functionality if backing file were used to share guest RAM
with another process.
Patch deprecates fallback so that we could remove it in future
and ensure that QEMU will provide expected behavior and fail if
it can't use user provided backing file.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190626074228.11558-1-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implicit RAM distribution between nodes has exactly the same issues as:
"numa: deprecate 'mem' parameter of '-numa node' option"
only with QEMU being the user that's 'adding' 'mem' parameter.
Deprecate it, to get it out of the way so that we could consolidate
guest RAM allocation using memory backends making it consistent and
possibly later on transition to using memory devices instead of
adhoc memory mapping for the initial RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1559205199-233510-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The parameter allows to configure fake NUMA topology where guest
VM simulates NUMA topology but not actually getting performance
benefits from it. The same or better results could be achieved
using 'memdev' parameter.
Beside of unpredictable performance, '-numa node.mem' option has
other issues when it's used with combination of -mem-path +
+ -mem-prealloc + memdev backends (pc-dimm), breaking binding of
memdev backends since mem-path/mem-prealloc are global and affect
the most of RAM allocations.
It's possible to make memdevs and global -mem-path/mem-prealloc
to play nicely together but that will just complicate already
complicated code and add unobious ways it could break on 2
different memmory allocation pathes and their combinations.
Instead of it, consolidate all guest RAM allocation over memdev
which still allows to create fake NUMA configurations if desired
and leaves one simplifyed code path to consider when it comes
to guest RAM allocation.
To achieve desired simplification deprecate 'mem' parameter as its
ad-hoc partitioning of initial RAM MemoryRegion can't be translated
to memdev based backend transparently to users and in compatible
manner (migration wise).
Later down the road that will allow to consolidate means of how
guest RAM is allocated and would permit us to clean up quite
a bit memory allocations and numa code, leaving only 'memdev'
implementation in place.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1559205199-233510-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Legacy '-numa node,mem' option has a number of issues and mgmt often
defaults to it. Unfortunately it's no possible to replace it with
an alternative '-numa memdev' without breaking migration compatibility.
What's possible though is to deprecate it, keeping option working with
old machine types only.
In order to help users to find out if being deprecated CLI option
'-numa node,mem' is still supported by particular machine type, add new
"numa-mem-supported" property to output of query-machines.
"numa-mem-supported" is set to 'true' for machines that currently support
NUMA, but it will be flipped to 'false' later on, once deprecation period
expires and kept 'true' only for old machine types that used to support
the legacy option so it won't break existing configuration that are using
it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1560172207-378962-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The field die_id (default as 0) and has_die_id are introduced to X86CPU.
Following the legacy smp check rules, the die_id validity is added to
the same contexts as leagcy smp variables such as hmp_hotpluggable_cpus(),
machine_set_cpu_numa_node(), cpu_slot_to_string() and pc_cpu_pre_plug().
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-4-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.
A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To get rid of the global smp_* variables we're currently using, it's recommended
to pass MachineState in the list of incoming parameters for functions that use
global smp variables, thus some redundant parameters are dropped. It's applied
for legacy smbios_*(), *_machine_reset(), hot_add_cpu() and mips *_create_cpu().
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEbBAABAgAGBQJdHmkBAAoJECgfDbjSjVRpEAIH+Kmy8n5Et9NzsnmNqHAiC/pg
3V5wGyp9M4ZJVPXC0z/Q1sYJ3YYP6dBd4tjj2/7LzYZSlqlQIs83UlQCo0XTiliH
/jZD/IaAZABnfB7vAeZW67WNT2a20xG2Jr83083lSaDUI/pfIdvbMelIbBLmo/kd
tWdAAWT0kcGYjyz4xQQgtAH6zAQUleKE7ECUJ2TpJQbSMLxdI/YTaoYqek471YdP
ju5OLBO3WbNkSE9JYz4MJqTudYK0sKu568UqBVF8JdpFd5Cv+X/OI+bCsc4QK8KN
DTtFVVvbm1KGPSceqc9rwsDjO4Wd8ThvuZxrB029AahD6vT82F13IHpi/S29Fw==
=WAFb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc, pci: features, fixes, cleanups
virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 04 Jul 2019 22:00:49 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
docs: avoid vhost-user-net specifics in multiqueue section
libvhost-user: implement VHOST_USER_PROTOCOL_F_MQ
libvhost-user: support many virtqueues
libvhost-user: add vmsg_set_reply_u64() helper
pc: Move compat_apic_id_mode variable to PCMachineClass
virtio: Don't change "started" flag on virtio_vmstate_change()
virtio: Make sure we get correct state of device on handle_aio_output()
virtio: Set "start_on_kick" on virtio_set_features()
virtio: Set "start_on_kick" for legacy devices
virtio: add "use-started" property
virtio-pci: fix missing device properties
pc: Support for virtio-pmem-pci
numa: Handle virtio-pmem in NUMA stats
hmp: Handle virtio-pmem when printing memory device infos
virtio-pci: Proxy for virtio-pmem
virtio-pmem: sync linux headers
virtio-pci: Allow to specify additional interfaces for the base type
virtio-pmem: add virtio device
pcie: minor cleanups for slot control/status
pcie: work around for racy guest init
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to avoid migration issues, we introduce a "use-started"
property to the base virtio device to indicate whether use
"started" flag or not. This property will be true by default and
set to false when machine type <= 4.0.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-2-xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the HMP handlers related to qapi/machine.json to
hw/core/machine-hmp-cmds.c, where they are covered by MAINTAINERS
section "Machine core", just like qapi/machine.json.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The handlers for qapi/machine.json's QMP commands are spread over
cpus.c, hw/core/numa.c, monitor/misc.c, monitor/qmp-cmds.c, and vl.c.
Move them all to new hw/core/machine-qmp-cmds.c, where they are
covered by MAINTAINERS section "Machine core", just like
qapi/machine.json.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move commands object-add, object-del, qom-get, qom-list,
qom-list-properties, qom-list-types, and qom-set with their types from
misc.json to new qom.json.
Move commands device-list-properties, device_add, device-del, and
event DEVICE_DELETED from misc.json to new qdev.json.
Add both new files to MAINTAINERS section QOM.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-5-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Straightforwardly updated for "MAINTAINERS: Make section "QOM" cover
qdev as well"]
Commit c87759ce87 fixed a regression affecting pc-q35 machines by
introducing a new pc-q35-4.0.1 machine version to be used instead
of pc-q35-4.0. The only purpose was to revert the default behaviour
of not using split irqchip, but the change also introduced the usual
hw_compat and pc_compat bits, and wired them for pc-q35 only.
This raises questions when it comes to add new compat properties for
4.0* machine versions of any architecture. Where to add them ? In
4.0, 4.0.1 or both ? Error prone. Another possibility would be to teach
all other architectures about 4.0.1. This solution isn't satisfying,
especially since this is a pc-q35 specific issue.
It turns out that the split irqchip default is handled in the machine
option function and doesn't involve compat lists at all.
Drop all the 4.0.1 compat lists and use the 4.0 ones instead in the 4.0.1
machine option function.
Move the compat props that were added to the 4.0.1 since c87759ce87 to
4.0.
Even if only hw_compat_4_0_1 had an impact on other architectures,
drop pc_compat_4_0_1 as well for consistency.
Fixes: c87759ce87 "q35: Revert to kernel irqchip"
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <156051774276.244890.8660277280145466396.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 80376c3fc2 in 2010 we added a workaround for
some qbus buses not being connected to qdev devices -- if the
bus has no parent object then we register a reset function which
resets the bus on system reset (and unregister it when the
bus is unparented).
Nearly a decade later, we have now no buses in the tree which
are created with non-NULL parents, so we can remove the
workaround and instead just assert that if the bus has a NULL
parent then it is the main system bus.
(The absence of other parentless buses was confirmed by
code inspection of all the callsites of qbus_create() and
qbus_create_inplace() and cross-checked by 'make check'.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190523150543.22676-1-peter.maydell@linaro.org
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Some qdev block devices have support for iothreads and take care of the
AioContext they are running in, but most devices don't know about any of
this. For the latter category, the qdev drive property must make sure
that their BlockBackend is in the main AioContext.
Unfortunately, while the current code just does the same thing for
devices that do support iothreads, this is not correct and it would show
as soon as we actually try to keep a consistent AioContext assignment
across all nodes and users of a block graph subtree: If a node is
already in a non-default AioContext because of one of its users,
attaching a new device should still be possible if that device can work
in the same AioContext. Switching the node back to the main context
first and only then into the device AioContext causes failure (because
the existing user wouldn't allow the switch to the main context).
So devices that support iothreads need a different kind of drive
property that leaves the node in its current AioContext, but by using
this type, the device promises to check later that it can work with this
context.
This patch adds the qdev infrastructure that allows devices to signal
that they handle iothreads and qdev should leave the AioContext alone.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b2fc91db84 ("q35: set split kernel irqchip as default") changed
the default for the pc-q35-4.0 machine type to use split irqchip, which
turned out to have disasterous effects on vfio-pci INTx support. KVM
resampling irqfds are registered for handling these interrupts, but
these are non-functional in split irqchip mode. We can't simply test
for split irqchip in QEMU as userspace handling of this interrupt is a
significant performance regression versus KVM handling (GeForce GPUs
assigned to Windows VMs are non-functional without forcing MSI mode or
re-enabling kernel irqchip).
The resolution is to revert the change in default irqchip mode in the
pc-q35-4.1 machine and create a pc-q35-4.0.1 machine for the 4.0-stable
branch. The qemu-q35-4.0 machine type should not be used in vfio-pci
configurations for devices requiring legacy INTx support without
explicitly modifying the VM configuration to use kernel irqchip.
Link: https://bugs.launchpad.net/qemu/+bug/1826422
Fixes: b2fc91db84 ("q35: set split kernel irqchip as default")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <155786484688.13873.6037015630912983760.stgit@gimli.home>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
-----BEGIN PGP SIGNATURE-----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=2q3B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' into staging
ppc patch queue 2019-05-29
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
ppc/pnv: add dummy XSCOM registers for PRD initialization
ppc/pnv: introduce new skiboot platform properties
spapr: Don't migrate the hpt_maxpagesize cap to older machine types
spapr: change default interrupt mode to 'dual'
spapr/xive: fix multiple resets when using the 'dual' interrupt mode
docs: provide documentation on the POWER9 XIVE interrupt controller
spapr/irq: add KVM support to the 'dual' machine
ppc/xics: fix irq priority in ics_set_irq_type()
spapr/irq: initialize the IRQ device only once
spapr/irq: introduce a spapr_irq_init_device() helper
spapr: check for the activation of the KVM IRQ device
spapr: introduce routines to delete the KVM IRQ device
sysbus: add a sysbus_mmio_unmap() helper
spapr/xive: activate KVM support
spapr/xive: add migration support for KVM
spapr/xive: introduce a VM state change handler
spapr/xive: add state synchronization with KVM
spapr/xive: add hcall support when under KVM
spapr/xive: add KVM support
spapr: Print out extra hints when CAS negotiation of interrupt mode fails
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s/kbd/tablet/, fixes cut+paste bug.
Cc: qemu-stable@nongnu.org
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190520081805.15019-1-kraxel@redhat.com
This will be used to remove the MMIO regions of the POWER9 XIVE
interrupt controller when the sPAPR machine is reseted.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-9-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A number of virtio devices (gpu, crypto, mouse, keyboard, tablet) only
support the virtio-1 (aka modern) mode. Currently if the user launches
QEMU, setting those devices to enable legacy mode, QEMU will silently
create them in modern mode, ignoring the user's (mistaken) request.
This patch introduces proper data validation so that an attempt to
configure a virtio-1-only devices in legacy mode gets reported as an
error to the user.
Checking this required introduction of a new field to explicitly track
what operating model is to be used for a device, separately from the
disable_modern and disable_legacy fields that record the user's
requested configuration.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190215103239.28640-2-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It would ensure that we would notice attempt to write beyond
the allocated buffer. In case of MemoryRegion backed ROM it's
the host buffer and the guest RAM otherwise.
assert can be triggered with:
dd if=/dev/zero of=/tmp/blob bs=63k count=1
qemu-system-x86_64 `for i in {1..33}; do echo -n " -acpitable /tmp/blob"; done`
Fixes: (a1666142db acpi-build: make ROMs RAM blocks resizeable)
Reported-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1554982098-336210-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
load_fit() reports errors with error_printf() instead of
error_report(). Worse, it even reports errors it actually recovers
from, in fit_cfg_compatible() and fit_load_fdt(). Messed up in
initial commit 51b58561c1.
Convert the helper functions for load_fit() to Error. Make sure each
failure path sets an error.
Fix fit_cfg_compatible() and fit_load_fdt() not to report errors they
actually recover from.
Convert load_fit() to error_report().
Cc: Paul Burton <pburton@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-4-armbru@redhat.com>
The first call of sysbus_get_default() creates the main system bus and
stores it in QOM as "/machine/unattached/sysbus". This must not
happen before main() creates "/machine", or else container_get() would
"helpfully" create it as "container" object, and the real creation of
"/machine" would later abort with "attempt to add duplicate property
'machine' to object (type 'container')". Has been that way ever since
we wired up busses in QOM (commit f968fc6892, v1.2.0).
I believe the bug is latent. I got it to bite by trying to
qdev_create() a sysbus device from a machine's .instance_init()
method.
The fix is obvious: store the main system bus in QOM right after
creating "/machine".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190308131445.17502-5-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
See the previous commit for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190308131445.17502-3-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Compatibility properties started life as a qdev property thing: we
supported them only for qdev properties, and implemented them with the
machinery backing command line option -global.
Recent commit fa0cb34d22 put them to use (tacitly) with memory
backend objects (subtypes of TYPE_MEMORY_BACKEND). To make that
possible, we first moved the work of applying them from the -global
machinery into TYPE_DEVICE's .instance_post_init() method
device_post_init(), in commits ea9ce8934c and b66bbee39f, then made
it available to TYPE_MEMORY_BACKEND's .instance_post_init() method
host_memory_backend_post_init() as object_apply_compat_props(), in
commit 1c3994f6d2.
Note the code smell: we now have function name starting with object_
in hw/core/qdev.c. It has to be there rather than in qom/, because it
calls qdev_get_machine() to find the current accelerator's and
machine's compat_props.
Turns out calling qdev_get_machine() there is problematic. If we
qdev_create() from a machine's .instance_init() method, we call
device_post_init() and thus qdev_get_machine() before main() can
create "/machine" in QOM. qdev_get_machine() tries to get it with
container_get(), which "helpfully" creates it as "container" object,
and returns that. object_apply_compat_props() tries to paper over the
problem by doing nothing when the value of qdev_get_machine() isn't a
TYPE_MACHINE. But the damage is done already: when main() later
attempts to create the real "/machine", it fails with "attempt to add
duplicate property 'machine' to object (type 'container')", and
aborts.
Since no machine .instance_init() calls qdev_create() so far, the bug
is latent. But since I want to do that, I get to fix the bug first.
Observe that object_apply_compat_props() doesn't actually need the
MachineState, only its the compat_props member of its MachineClass and
AccelClass. This permits a simple fix: register MachineClass and
AccelClass compat_props with the object_apply_compat_props() machinery
right after these classes get selected.
This is actually similar to how things worked before commits
ea9ce8934c and b66bbee39f, except we now register much earlier. The
old code registered them only after the machine's .instance_init()
ran, which would've broken compatibility properties for any devices
created there.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190308131445.17502-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
As NVDIMM support is looming for ARM and SPAPR, let's
move the acpi_nvdimm_state to the generic machine struct
instead of duplicating the same code in several machines.
It is also renamed into nvdimms_state and becomes a pointer.
nvdimm and nvdimm-persistence become generic machine options.
They become guarded by a nvdimm_supported machine class member.
We also add a description for those options.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190308182053.5487-3-eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's use a wrapper instead of looking it up manually. This function can
than be reused when we explicitly want to have the bus hotplug handler
(e.g. when the bus hotplug handler was overwritten by the machine
hotplug handler).
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190228122849.4296-4-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will allow to return another hotplug handler than the default
one for a specific bus based device type. Which is needed to handle
non trivial plug/unplug sequences that need the access to resources
configured outside of bus where device is attached.
That will allow for returned hotplug handler to orchestrate wiring
in arbitrary order, by chaining other hotplug handlers when
it's needed.
PS:
It could be used for hybrid virtio-mem and virtio-pmem devices
where it will return machine as hotplug handler which will do
necessary wiring at machine level and then pass control down
the chain to bus specific hotplug handler.
Example of top level hotplug handler override and custom plug sequence:
some_machine_get_hotplug_handler(machine){
if (object_dynamic_cast(OBJECT(dev), TYPE_SOME_BUS_DEVICE)) {
return HOTPLUG_HANDLER(machine);
}
return NULL;
}
some_machine_device_plug(hotplug_dev, dev) {
if (object_dynamic_cast(OBJECT(dev), TYPE_SOME_BUS_DEVICE)) {
/* do machine specific initialization */
some_machine_init_special_device(dev)
/* pass control to bus specific handler */
hotplug_handler_plug(dev->parent_bus->hotplug_handler, dev)
}
}
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190228122849.4296-3-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When unplugging a device, at one point the device will be destroyed
via object_unparent(). This will, one the one hand, unrealize the
removed device hierarchy, and on the other hand, destroy/free the
device hierarchy.
When chaining hotplug handlers, we want to overwrite a bus hotplug
handler by the machine hotplug handler, to be able to perform
some part of the plug/unplug and to forward the calls to the bus hotplug
handler.
For now, the bus hotplug handler would trigger an object_unparent(), not
allowing us to perform some unplug action on a device after we forwarded
the call to the bus hotplug handler. The device would be gone at that
point.
machine_unplug_handler(dev)
/* eventually do unplug stuff */
bus_unplug_handler(dev)
/* dev is gone, we can't do more unplug stuff */
So move the object_unparent() to the original caller of the unplug. For
now, keep the unrealize() at the original places of the
object_unparent(). For implicitly chained hotplug handlers (e.g. pc
code calling acpi hotplug handlers), the object_unparent() has to be
done by the outermost caller. So when calling hotplug_handler_unplug()
from inside an unplug handler, nothing is to be done.
hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
machine_unplug_handler(dev) {
/* eventually do unplug stuff */
bus_unplug_handler(dev) -> calls unrealize(dev)
/* we can do more unplug stuff but device already unrealized */
}
object_unparent(dev)
In the long run, every unplug action should be factored out of the
unrealize() function into the unplug handler (especially for PCI). Then
we can get rid of the additonal unrealize() calls and object_unparent()
will properly unrealize the device hierarchy after the device has been
unplugged.
hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
machine_unplug_handler(dev) {
/* eventually do unplug stuff */
bus_unplug_handler(dev) -> only unplugs, does not unrealize
/* we can do more unplug stuff */
}
object_unparent(dev) -> will unrealize
The original approach was suggested by Igor Mammedov for the PCI
part, but I extended it to all hotplug handlers. I consider this one
step into the right direction.
To summarize:
- object_unparent() on synchronous unplugs is done by common code
-- "Caller of hotplug_handler_unplug"
- object_unparent() on asynchronous unplugs ("unplug requests") has to
be done manually
-- "Caller of hotplug_handler_unplug"
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190228122849.4296-2-david@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The qbus_is_full(BusState *bus) function (qdev_monitor.c) compares the max_index
value of the BusState structure with the max_dev value of the BusClass structure
to determine whether the maximum number of children has been reached for the
bus. The problem is, the max_index field of the BusState structure does not
necessarily reflect the number of devices that have been plugged into
the bus.
Whenever a child device is plugged into the bus, the bus's max_index value is
assigned to the child device and then incremented. If the child is subsequently
unplugged, the value of the max_index does not change and no longer reflects the
number of children.
When the bus's max_index value reaches the maximum number of devices
allowed for the bus (i.e., the max_dev field in the BusClass structure),
attempts to plug another device will be rejected claiming that the bus is
full -- even if the bus is actually empty.
To resolve the problem, a new 'num_children' field is being added to the
BusState structure to keep track of the number of children plugged into the
bus. It will be incremented when a child is plugged, and decremented when a
child is unplugged.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel<pmorel@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <1545062250-7573-1-git-send-email-akrowiak@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In order to avoid migration issues, we enable DISCARD and
WRITE_ZEROES features only for machine type >= 4.0
As discussed with Michael S. Tsirkin and Stefan Hajnoczi on the
list [1], DISCARD operation should not have security implications
(eg. page cache attacks), so we can enable it by default.
[1] https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg00504.html
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-4-sgarzare@redhat.com
Message-Id: <20190221103314.58500-4-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Certain devices types, like memory/CPU, are now being handled using a
hotplug interface provided by a top-level MachineClass. Hotpluggable
host bridges are another such device where it makes sense to use a
machine-level hotplug handler. However, unlike those devices,
host-bridges have a parent bus (the main system bus), and devices with
a parent bus use a different mechanism for registering their hotplug
handlers: qbus_set_hotplug_handler(). This interface currently expects
a handler to be a subclass of DeviceClass, but this is not the case
for MachineClass, which derives directly from ObjectClass.
Internally, the interface only requires an ObjectClass, so expose that
in qbus_set_hotplug_handler().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <154999589921.690774.3640149277362188566.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Don't expect read(2) can always read as many as it's told.
CC: Richard Henderson <richard.henderson@linaro.org>
CC: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse any
ELF program headers of type PT_NOTE and check to see if the ELF
Note is of the type specified by the 'translate_opaque' arg.
If a matching ELF Note is found then the specfied function pointer
is called to process the ELF note.
Passing a NULL function pointer results in ELF Notes being skipped.
The first consumer of this functionality is the PVHboot support
which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while
loading the uncompressed kernel binary in order to discover the
boot entry address for the x86/HVM direct boot ABI.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows guests have trouble dealing with usb devices having identical
serial numbers. So, assign unique serial numbers to usb hid devices.
All other usb devices have this already.
In the past the fixed serial number has been used to indicate working
remote setup to linux guests. Here is a bit of history:
* First there was nothing.
* Then I added a rule to udev checking for serial == 42.
(this is in rhel-6).
* Then systemd + udev merged.
* Then I changed the rule to check for serial != 1 instead, so we can
use any serial but "1" which is the one the old broken devices had
(this is in rhel-7). March 2014 in upstream systemd.
* Then all usb power management rules where dropped from systemd (June
2015). Which I figured today (Sept 2018), after wondering that the
rules are gone in fedora 28.
So, three years ago the serial number check was dropped upstream, yet I
hav't seen a single report about autosuspend issues (or cpu usage for
usb emulation going up, which is the typical symtom).
So I figured I can stop worring that changing the serial number will
break things and just do it.
And even if it turns out autosuspend is still an issue: I think
meanwhile we can really stop worrying about guests running in old qemu
versions with broken usb suspend (fixed in 0.13 !). If needed we can
enable autosuspend unconditionally in guests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190110125108.22834-1-kraxel@redhat.com
The following patches implement the TPM Physical Presence Interface,
make use of a new memory region and a fw_cfg entry. Enable PPI by
default with >=4.0 machine type, to avoid migration issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The disable-legacy and disable-modern properties apply only to
some virtio-pci devices. Make those properties optional.
This fixes the crash introduced by commit f6e501a28e ("virtio: Provide
version-specific variants of virtio PCI devices"):
$ qemu-system-x86_64 -machine pc-i440fx-2.6 \
-device virtio-net-pci-non-transitional
Unexpected error in object_property_find() at qom/object.c:1092:
qemu-system-x86_64: -device virtio-net-pci-non-transitional: can't apply \
global virtio-pci.disable-modern=on: Property '.disable-modern' not found
Aborted (core dumped)
Reported-by: Thomas Huth <thuth@redhat.com>
Fixes: f6e501a28e ("virtio: Provide version-specific variants of virtio PCI devices")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* esp bugfixes (Guenter)
* Windows build cleanup (Marc-André)
* checkpatch logic improvements (Paolo)
* coalesced range bugfix (Paolo)
* switch testsuite to TAP (Paolo)
* QTAILQ rewrite (Paolo)
* block/iscsi.c cancellation fixes (Stefan)
* improve selection of the default accelerator (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcOKyMAAoJEL/70l94x66DxKEH/1ho2Xl8ezxCecA6q3HqTgMT
NJ/ntdqQwVwekKOWzsywnM3/LkEDLH55MxbTeQ8M/Vb1seS8eROz24/gPTzvFrfR
n/d11rDV1EJfWe0H7nGLLFiRv0MSjxLpG9c3dlOKWhwOYHm25tr48PsdfVFP9Slz
BK3rwrMeDgArfptHAIsAXt2h1S0EzrG9pMwGDpErCDzziXxBhUESE0Iqfw8LsH1K
VjMn6rn7Ts1XKlxxwsm+BzHlTJghbj3tWPIfk+6uK2isP4iM3gFCoav3SG9XVXof
V9+vFyMxdtZKT/0HvajhUS4/1S/uGBNNchZRnCxXlpbueWc5ROtvarhM6Hb0eck=
=i8E5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* HAX support for Linux hosts (Alejandro)
* esp bugfixes (Guenter)
* Windows build cleanup (Marc-André)
* checkpatch logic improvements (Paolo)
* coalesced range bugfix (Paolo)
* switch testsuite to TAP (Paolo)
* QTAILQ rewrite (Paolo)
* block/iscsi.c cancellation fixes (Stefan)
* improve selection of the default accelerator (Thomas)
# gpg: Signature made Fri 11 Jan 2019 14:47:40 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (34 commits)
avoid TABs in files that only contain a few
remove space-tab sequences
scripts: add script to convert multiline comments into 4-line format
hw/watchdog/wdt_i6300esb: remove a unnecessary comment
checkpatch: warn about qemu/queue.h head structs that are not typedef-ed
qemu/queue.h: simplify reverse access to QTAILQ
qemu/queue.h: reimplement QTAILQ without pointer-to-pointers
qemu/queue.h: remove Q_TAILQ_{HEAD,ENTRY}
qemu/queue.h: typedef QTAILQ heads
qemu/queue.h: leave head structs anonymous unless necessary
vfio: make vfio_address_spaces static
qemu/queue.h: do not access tqe_prev directly
test: replace gtester with a TAP driver
test: execute g_test_run when tests are skipped
qga: drop < Vista compatibility
build-sys: build with Vista API by default
build-sys: move windows defines in osdep.h header
build-sys: don't include windows.h, osdep.h does it
scsi: esp: Defer command completion until previous interrupts have been handled
esp-pci: Fix status register write erase control
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit ea9ce8934, device_post_init() applies globals directly
from machines and accelerator classes.
There are cases, such as -device scsi-hd,help, where the machine is
setup but there in no accelerator.
Let's skip accelerator globals in this case.
Fixes SEGV:
#0 0x0000555558ea04ff in object_get_class (obj=0x0) at /home/elmarco/src/qemu/build/../qom/object.c:857
#1 0x000055555854c797 in object_apply_compat_props (obj=0x616000078980) at /home/elmarco/src/qemu/build/../hw/core/qdev.c:978
#2 0x000055555854c797 in object_apply_compat_props (obj=0x616000078980) at /home/elmarco/src/qemu/build/../hw/core/qdev.c:973
#3 0x000055555854c959 in device_post_init (obj=0x616000078980) at /home/elmarco/src/qemu/build/../hw/core/qdev.c:989
#4 0x0000555558e9e250 in object_post_init_with_type (ti=<optimized out>, obj=0x616000078980) at /home/elmarco/src/qemu/build/../qom/object.c:365
#5 0x0000555558e9e250 in object_initialize_with_type (data=0x616000078980, size=616, type=<optimized out>) at /home/elmarco/src/qemu/build/../qom/object.c:425
#6 0x0000555558e9e571 in object_new_with_type (type=0x613000031900) at /home/elmarco/src/qemu/build/../qom/object.c:588
#7 0x000055555830c048 in qmp_device_list_properties (typename=typename@entry=0x60200000c2d0 "scsi-hd", errp=errp@entry=0x7fffffffc540) at /home/elmarco/src/qemu/qmp.c:519
#8 0x00005555582c4027 in qdev_device_help (opts=<optimized out>) at /home/elmarco/src/qemu/qdev-monitor.c:283
#9 0x0000555559378fa2 in qemu_opts_foreach (list=<optimized out>, func=func@entry=0x5555582cfca0 <device_help_func>, opaque=opaque@entry=0x0, errp=errp@entry=0x0) at /home/elmarco/src/qemu/util/qemu-option.c:1171
https://bugzilla.redhat.com/show_bug.cgi?id=1664364
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190109102311.7635-1-marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of verbose arrays with 4 lines for each entry, make each
entry take only one line. This makes long arrays that couldn't
fit in the screen become short and readable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-4-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
stringify() is useful when we need to use macros in compat_props
(like when we set virtio-baloon-pci.class=PCI_CLASS_MEMORY_RAM at
pc_i440fx_1_0_machine_options()), but it is pointless when we are
already providing a number literal.
Replace stringify() with string literals when appropriate.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-3-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=x1jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging
target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
# gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits)
Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.
hw/misc/tz-mpc: Fix value of BLK_MAX register
target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
arm: Add Clock peripheral stub to NRF51 SOC
tests/microbit-test: Add Tests for nRF51 Timer
arm: Instantiate NRF51 Timers
hw/timer/nrf51_timer: Add nRF51 Timer peripheral
tests/microbit-test: Add Tests for nRF51 GPIO
arm: Instantiate NRF51 general purpose I/O
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
arm: Instantiate NRF51 random number generator
hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
arm: Add header to host common definition for nRF51 SOC peripherals
qtest: Add set_irq_in command to set IRQ/GPIO level
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
cpus.c: Fix race condition in cpu_stop_current()
MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/
hw/arm: versal: Plug memory leaks
Revert "armv7m: Guard against no -kernel argument"
arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
noload kernels are loaded with the u-boot image header and as a result
the header size needs adding to the entry point. Fake up a hdr so the
kernel image is loaded at the right address and the entry point is
adjusted appropriately.
The default location for the uboot file is 32MiB above bottom of DRAM.
This matches the recommendation in Documentation/arm/Booting.
Clarify the load_uimage API to state the passing of a load address when an
image doesn't specify one, or when loading a ramdisk is expected.
Adjust callers of load_uimage, etc.
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-id: 11488a08-1fe0-a278-2210-deb64731107f@gmx.co.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hostmem-file and hostmem-memfd use the whole object path for the
memory region name, and hostname-ram uses only the path component (the
object id, or canonical path basename):
qemu -m 1024 -object memory-backend-file,id=mem,size=1G,mem-path=/tmp/foo -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
qemu -m 1024 -object memory-backend-memfd,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
qemu -m 1024 -object memory-backend-ram,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
For consistency, change to use object id for -file and -memfd as well
with >= 4.0.
Having a consistent naming allows to migrate to different hostmem
backends.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
It's now possible to use the common function.
Teach object_apply_global_props() to warn if Error argument is NULL.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
All qdev_prop_register_global() set &error_fatal for errp, except
'-rtc driftfix=slew', which arguably should also use &error_fatal, as
otherwise failing to apply the property would only report a warning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
A step towards being able to call a common function,
object_apply_global_props().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
All globals are now either provided via -global or through -cpu
features (CPU features are implemented by registering globals).
If the global isn't being used, it should warn in either case.
We can thus consider that all global_props are "user-provided"
globals. No need to track this per-globals anymore.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
This will allow to apply compat properties on other objects than QDev easily.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Use static arrays instead. I decided to rename the conflicting
pc_compat_2_1() function with pc_compat_2_1_fn().
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Use static arrays instead. I decided to rename the conflicting
pc_compat_2_2() function with pc_compat_2_2_fn().
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Use static arrays instead. I decided to rename the conflicting
pc_compat_2_3() function with pc_compat_2_3_fn().
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Similarly to accel properties, move compat properties out of globals
registration, and apply the machine compat properties during
device_post_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of registering compat properties as globals, let's keep them
in their own array, to avoid mixing with user globals.
Introduce object_apply_global_props() function, to apply compatibility
properties from a GPtrArray.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Starting from QEMU 4.0, let's specify "split" as the default value for
kernel-irqchip.
So for QEMU>=4.0 we'll have: allowed=Y,required=N,split=Y
for QEMU<=3.1 we'll have: allowed=Y,required=N,split=N
(omitting all the "kernel_irqchip_" prefix)
Note that this will let the default q35 machine type to depend on
Linux version 4.4 or newer because that's where split irqchip is
introduced in kernel. But it's fine since we're boosting supported
Linux version for QEMU 4.0 to around Linux 4.5. For more information
please refer to the discussion on AMD's RDTSCP:
https://lore.kernel.org/lkml/20181210181328.GA762@zn.tnic/
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Create properties to be able to define speeds and widths for PCIe
links. The only tricky bit here is that our get and set callbacks
translate from the fixed QAPI automagic enums to those we define
in PCI code to represent the actual register segment value.
Cc: Eric Blake <eblake@redhat.com>
Tested-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The load_image() function is now no longer used anywhere, so
we can remove it completely. (Use load_image_size() or
g_file_get_contents() instead.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-10-peter.maydell@linaro.org
The API of cpu_physical_memory_write_rom() is odd, because it
takes an AddressSpace, unlike all the other cpu_physical_memory_*
access functions. Rename it to address_space_write_rom(), and
bring its API into line with address_space_write().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20181122133507.30950-3-peter.maydell@linaro.org
Use DeviceClass rather than SysBusDeviceClass in
empty_slot_class_init().
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-5-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=+od8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging
Trivial patches (2018-12-11)
# gpg: Signature made Tue 11 Dec 2018 18:02:20 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-patches-pull-request: (30 commits)
Fixes i386 xchgq test
maint: Grammar fix to mailmap
MAINTAINERS: Update email address for Fam Zheng
cutils: Assert in-range base for string-to-integer conversions
util: vfio-helpers: use ARRAY_SIZE in qemu_vfio_init_pci()
target: hax: fix errors in comment
MAINTAINERS: Use my work email to review Build and test automation patches
MAINTAINERS: Add a missing entry for the NVDIMM device
MAINTAINERS: Add a missing entry to the QMP section
MAINTAINERS: Add a missing entry to SPICE
MAINTAINERS: Add missing entries for the MPS2 machine
MAINTAINERS: Add missing entries for the Canon DIGIC machine
MAINTAINERS: Add missing entries to the vhost section
MAINTAINERS: Add missing entries to the PC Chipset section
MAINTAINERS: Add a missing entry for the sun4m machines
MAINTAINERS: Add a missing entry for the Old World machines
MAINTAINERS: Add a missing entry for the Xilinx S3A-DSP 1800 machine
MAINTAINERS: Add missing entries for the Jazz machine
MAINTAINERS: Add missing entries for the Xilinx ZynqMP machine
MAINTAINERS: Add a missing entry to the SPARC CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of trying to implement something that isn't well specified,
remove it. (it would be tricky to implement, since a class struct is
memcpy on children types...)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181204142023.15982-7-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is only used by a test, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181204142023.15982-6-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
global_props is only used for Xen xen_compat_props. It's a static
array of GlobalProperty, like machine globals in SET_MACHINE_COMPAT().
Let's register the globals the same way, without extra copy allocation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20181204142023.15982-5-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In set_netdev(), the peers[i] is initialized
qemu_find_net_clients_except() when i is in
0 between 'queues' it can't be NULL.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1541751214-17515-1-git-send-email-liq3ea@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The null-machine code used to be target specific since it used the
target-specific cpu_init() function in the past. But in the recent
commit 2278b93941 ("Use cpu_create(type) instead of
cpu_init(cpu_model)") this has been change, so that the code now
uses the common cpu_create() function instead. Thus we can put
the null-machine into the common-obj list so that it is compiled
only once for all targets, to save some compilation time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>