The ->complete() callback might have released the USBPacket (uhci
actually does), so we must not touch it after the callback returns.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds code to do minimal siTD handling, which is basically
just following the next pointer. This is good enougth to handle the
inactive siTDs used by FreeBSD. Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USB Devices can have up to 15 IN and 15 OUT endpoints, not 15 endpoints
total. Move from one array to two arrays (one IN, one OUT) to maintain
the endpoint state.
When configured to pass through a specific host port (using hostbus and
hostport properties), try to claim the port if supported by the kernel.
That will avoid any kernel drivers binding to devices plugged into that
port. It will not stop any userspace apps (such as usb_modeswitch)
access the device via usbfs though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is perfectly fine to leave the usb device in unconfigured state
(USBHostDevice->configuration == 0). Just do that and wait for the
guest to explicitly set a configuration. This is closer to what real
hardware does and it also simplifies the device initialization. There
is no need to figure how the device is configured on the host.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Limit the number of times qemu tries to open host devices to three.
Reset error counter when the device goes away, after un-plugging and
re-plugging the device qemu will try again three times.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Two fixes for the price of one ;)
First, reinitialize the endpoint table after device reset.
This is needed anyway as the reset might have switched interfaces.
It also clears the endpoint halted state.
Second the CLEAR_HALT ioctl wants a unsigned int passed in as
argument, not uint8_t.
This gets my usb sd card reader (sandisk micromate) going.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a bunch of trace points to usb-linux.c Drop a bunch of DPRINTK's in
favor of the trace points. Also cleanup error reporting a bit while being
at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No change to the CPU kinds, so SMP will only work if
manually changing the cpu to 34Kf:
-cpu 34Kf -smp 2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
1. The pending need to pass the Status IM gating.
2. The priority is from seven (highest prio) down to zero.
QEMU was doing the opposite.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
These registers share some of their fields. Writes to these fields
should be visible through the corresponding mirror fields.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Add a new memory space for PCI instead of using system memory.
This also fixes a bug where VGA region vga.chain4 is
accidentally mapped to 0xa0000 instead of 0x1ff000a0000.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Prepares for uint32 replacement.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Prepares for uint16 replacement.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Allow overriding the location of Samba's smbd.
Pretty much every OS I look at has some means of
changing this path (patching) so lets just make
it easier for OS developers creating packages
and/or end users to override the location.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A packed struct needs different gcc attributes for compilations
with MinGW compilers because glib-2.0 adds compiler flag
-mms-bitfields which modifies the packing algorithm.
Attribute gcc_struct reverses the negative effects of -mms-bitfields.
QEMU_PACKED sets this attribute and must be used for any packed
struct which is affected by -mms-bitfields.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix install(1) usage to be compatible with OpenBSD's install(1).
When creating a directory via the -d flag the -p flag cannot be
used at the same time. Also in the context of installing QEMU it
doesn't make sense to use the -p flag anyway so use the [default]
-c flag instead.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This has been discussed before in the past. The special casing really makes no
sense anymore. This seems like a good change to make for 1.0.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Enabling the I/O thread by default seems like an important part of declaring
1.0. Besides allowing true SMP support with KVM, the I/O thread means that the
TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which
currently requires a (racey) signal based alarm system.
I know there have been concerns about performance. I think so far the ones that
have come up (virtio-net) are most likely due to secondary reasons like
decreased batching.
I think we ought to force enabling I/O thread early in 1.0 development and
commit to resolving any lingering issues.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid duplicate object files during the link. There are legitimate
cases where a link command-line would include duplicate object files
because two independent subsystems both depend on common infrastructure.
Use GNU make's $(sort) function to remove duplicate object files from
the link command-line.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch changes qemu_set_fd_handler to be implemented in terms of
g_io_add_watch(). The semantics are a bit different so some glue is required.
qemu_set_fd_handler2 is much harder to convert because of its use of polling.
The glib main loop has the major of advantage of having a proven thread safe
architecture. By using the glib main loop instead of our own, it will allow us
to eventually introduce multiple I/O threads.
I'm pretty sure that this will work on Win32, but I would appreciate some help
testing. I think the semantics of g_io_channel_unix_new() are really just tied
to the notion of a "unix fd" and not necessarily unix itself.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows GSources to be used to register callback events in QEMU. This is
useful as it allows us to take greater advantage of glib and also because it
allows us to write code that is more easily testable outside of QEMU since we
can make use of glib's main loop in unit tests.
All new code should use glib's callback mechanisms for registering fd events
which are very well documented at:
http://developer.gnome.org/glib/stable/glib-The-Main-Event-Loop.html
And:
http://developer.gnome.org/gio/stable/
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the declaration and initialisation of some variables in
tcg_out_qemu_ld and tcg_out_qemu_st inside CONFIG_SOFTMMU, to
avoid the "variable set but not used" warning of gcc 4.6.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: malc <av1474@comtv.ru>
The simpletrace.process() function invokes analyzer methods with the
wrong number of arguments if a timestamp should be included. This patch
fixes the issue so that trace analysis scripts can make use of
timestamps.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Given that all events with programmatically-controlled state are disabled by
default, we can delete the "disable" property from all events.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Uses the generic interface provided in "trace/control.h" in order to provide
a programmatic interface as well as command line and monitor controls.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Note that this refers to the backend-specific state (whether the output must be
generated), not the event "disabled" property (which always uses the "nop"
backend).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Any event with the keyword/property "disable" generates an empty trace event
using the "nop" backend, regardless of the current backend.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
The "-trace events" argument can be used to provide a file with a list of trace
event names that will be enabled prior to starting execution, thus providing
early tracing.
This saves the user from manually toggling event states through the monitor
interface or whichever backend-specific interface.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
The current interface is generic for this small set of operations, and thus
other backends can easily modify the "trace/control.c" file to add their own
implementation.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
