Collect superio functionality and its controlling config registers
handling in an abstract VIA_SUPERIO class that is a subclass of
ISA_SUPERIO and put vt82c686b specific parts in a subclass of this
abstract class.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <fbcc8cc8baf83f327612a1ef1c14bcbcdb0e7edb.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Verify that hflags was updated correctly whenever we change
cpu state that is used by hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-11-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In save_user_regs, there are two bugs where we OR in a bit number
instead of the bit, clobbering the low bits of MSR. However:
The MSR_VR and MSR_SPE bits control the availability of the insns.
If the bits were not already set in MSR, then any attempt to access
those registers would result in SIGILL.
For linux-user, we always initialize MSR to the capabilities
of the cpu. We *could* add checks vs MSR where we currently
check insn_flags and insn_flags2, but we know they match.
Also, there's a stray cut-and-paste comment in restore.
Then, do not force little-endian binaries into big-endian mode.
Finally, use ppc_store_msr for the update to affect hflags.
Which is the reason none of these bugs were previously noticed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-10-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We weren't recording MSR_GS in hflags, which means that BookE
memory accesses were essentially random vs Guest State.
Instead of adding this bit directly, record the completed mmu
indexes instead. This makes it obvious that we are recording
exactly the information that we need.
This also means that we can stop directly recording MSR_IR.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-9-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Nothing within the translator -- or anywhere else for that
matter -- checks MSR_SA or MSR_AP on the 602. This may be
a mistake. However, for the moment, we need not record these
bits in hflags.
This allows us to simplify HFLAGS_VSX computation by moving
it to overlap with MSR_VSX.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-8-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because this bit was not in hflags, the privilege check
for tlb instructions was essentially random.
Recompute hflags when storing to LPCR.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-7-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Perform the test against FSCR_SCV at runtime, in the helper.
This means we can remove the incorrect set against SCV in
ppc_tr_init_disas_context and do not need to add an HFLAGS bit.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-6-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because these bits were not in hflags, the code generated
for single-stepping on BookE was essentially random.
Recompute hflags when storing to dbcr0.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-5-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will be stored in tb->flags, which is also uint32_t,
so let's use the correct size.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-4-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Copying flags directly from msr has drawbacks: (1) msr bits
mean different things per cpu, (2) msr has 64 bits on 64 cpus
while tb->flags has only 32 bits.
Create a enum to define these bits. Document the origin of each bit
and validate those bits that must match MSR. This fixes the
truncation of env->hflags to tb->flags, because we no longer
have hflags bits set above bit 31.
Most of the code in ppc_tr_init_disas_context is moved over to
hreg_compute_hflags. Some of it is simple extractions from msr,
some requires examining other cpu flags. Anything that is moved
becomes a simple extract from hflags in ppc_tr_init_disas_context.
Several existing bugs are left in ppc_tr_init_disas_context, where
additional changes are required -- to be addressed in future patches.
Remove a broken #if 0 block.
Reported-by: Ivan Warren <ivan@vmfacility.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-3-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extract post_load_update_msr to share between cpu_load_old
and cpu_post_load in updating the msr.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-2-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-16-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-15-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As per hreg_compute_hflags:
We 'forget' FE0 & FE1: we'll never generate imprecise exceptions
remove the hflags marker from the respective comments.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-7-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have eliminated all normal uses of hflags_nmsr. We need
not even compute it except when we want to migrate. Rename
the field to emphasize this.
Remove the fixme comment for migrating access_type. This value
is only ever used with the current executing instruction, and
is never live when the cpu is halted for migration.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-6-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In ppc_store_msr we call hreg_compute_hflags, which itself
calls hreg_compute_mem_idx. Rely on ppc_store_msr to update
everything required by the msr update.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-5-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Match cpu_post_load in using ppc_store_msr to set all of
the cpu state implied by the value of msr. Do not restore
hflags or hflags_nmsr, as we recompute them in ppc_store_msr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-4-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Keep all hflags computation in one place, as this will be
especially important later.
Introduce a new POWERPC_FLAG_HID0_LE bit to indicate when
LE should be taken from HID0. This appears to be set if
and only if POWERPC_FLAG_RTC_CLK is set, but we're not
short of bits and having both names will avoid confusion.
Note that this was the only user of hflags_nmsr, so we can
perform a straight assignment rather than mask and set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-3-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the functions to a new file, helper_regs.c.
Note int_helper.c was relying on helper_regs.h to
indirectly include qemu/log.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-2-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On Mac99 and newer machines, the Uninorth PCI host bridge maps
the PCI hole region at 2GiB, so the RAM area beside 2GiB is not
accessible by the CPU. Restrict the memory to 2GiB to avoid
problems such the one reported in the buglink.
Buglink: https://bugs.launchpad.net/qemu/+bug/1922391
Reported-by: Håvard Eidnes <he@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210406084842.2859664-1-f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We check the amount of RAM is enough, warn when it is
not, but if so we neglect to bail out. Fix that by
adding the missing exit() call.
Fixes: bda19d7bb5 ("hw/rx: Add RX GDB simulator")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210407223056.1870497-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
'id' of memory-backend-{file,ram} is not only for '-numa''s reference, but
also other parameters like '-device nvdimm'.
More clearly call out this to avoid misinterpretation.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1619080922-83527-1-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch fixes the update-binfmts templates being used in the script
scripts/qemu-binfmt-conf.sh when the option --debian is used.
Fixed issues are:
- Typo in flag 'credentials' (previously 'credential').
- Missing flags 'preserve' and 'fix_binary'.
Reference: https://manpages.debian.org/buster/binfmt-support/update-binfmts.8.en.html#FORMAT_FILES
Signed-off-by: Silvano Cirujano Cuesta <silvano.cirujano-cuesta@siemens.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210323123457.23747-1-silvano.cirujano-cuesta@siemens.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is just an oversight.
Fixes: f518be3aa3 ("target/ppc: Remove "compat" property of server class POWER CPUs")
Cc: groug@kaod.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <161399328834.51902.14269239378658110394.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The category of the mc146818rtc device is not set, put it into the 'misc'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201130083630.2520597-6-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including hw/boards.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include qemu/log.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210328054833.2351597-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/irq.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210327050236.2232347-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/sysbus.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210327082804.2259480-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The include/hw/hw.h header only has a prototype for hw_error(),
so it does not make sense to include this in files that do not
use this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210326151848.2217216-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Refactor qemu_xkeymap_mapping_table() to have a single exit point,
so we can easily free the memory allocated by XGetAtomName().
This fixes when running a binary configured with --enable-sanitizers:
Direct leak of 22 byte(s) in 1 object(s) allocated from:
#0 0x561344a7473f in malloc (qemu-system-x86_64+0x1dab73f)
#1 0x7fa4d9dc08aa in XGetAtomName (/lib64/libX11.so.6+0x2a8aa)
Fixes: 2ec78706d1 ("ui: convert GTK and SDL1 frontends to keycodemapdb")
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210430155009.259755-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If the Kconfig 'PCMCIA' value is not selected, it is pointless
to build the PCMCIA core components.
(Currently only one machine of the ARM targets requires this).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210424222057.3434459-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Microdrive Compact Flash can be plugged on a PCMCIA bus.
Express the dependency using the 'depends on' Kconfig expression.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210424222057.3434459-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Intel XScale PXA chipsets provide a PCMCIA controller,
which expose a PCMCIA bus. Express this dependency using
the Kconfig 'select' expression.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210424222057.3434459-2-f4bug@amsat.org>
[lv: remove "(IDE)"]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When dumping the extra exit data provided by KVM, make it clear that
the data is hexadecimal.
At the same time, zero-pad the output.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210428142431.266879-1-david.edmondson@oracle.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add a new job to cross-build the mips64el target without
the TCG accelerator (IOW: only KVM accelerator enabled).
Only build the mips64el target which is known to work
and has users.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-31-f4bug@amsat.org>
Only the malta and loongson3-virt machines support KVM.
Restrict the other machines to TCG:
- mipssim
- magnum
- pica61
- fuloong2e
- boston
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-30-f4bug@amsat.org>
To ease maintenance, move all TCG specific files under the tcg/
sub-directory. Adapt the Meson machinery.
The following prototypes:
- mips_tcg_init()
- mips_cpu_do_unaligned_access()
- mips_cpu_do_transaction_failed()
can now be restricted to the "tcg-internal.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-29-f4bug@amsat.org>
Opcodes accessing Coprocessor 0 are privileged.
Move the CP0 helpers to sysemu/ and simplify the #ifdef'ry.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-28-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-27-f4bug@amsat.org>
