The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
x86_cpu_load_model() is wrong that way. Harmless, because its @errp
is always &error_abort. To fix, cut out the @errp middleman.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505101908.6207-11-armbru@redhat.com>
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
Add a SIGBUS signal handler. In this handler, it checks the SIGBUS type,
translates the host VA delivered by host to guest PA, then fills this PA
to guest APEI GHES memory, then notifies guest according to the SIGBUS
type.
When guest accesses the poisoned memory, it will generate a Synchronous
External Abort(SEA). Then host kernel gets an APEI notification and calls
memory_failure() to unmapped the affected page in stage 2, finally
returns to guest.
Guest continues to access the PG_hwpoison page, it will trap to KVM as
stage2 fault, then a SIGBUS_MCEERR_AR synchronous signal is delivered to
Qemu, Qemu records this error address into guest APEI GHES memory and
notifes guest using Synchronous-External-Abort(SEA).
In order to inject a vSEA, we introduce the kvm_inject_arm_sea() function
in which we can setup the type of exception and the syndrome information.
When switching to guest, the target vcpu will jump to the synchronous
external abort vector table entry.
The ESR_ELx.DFSC is set to synchronous external abort(0x10), and the
ESR_ELx.FnV is set to not valid(0x1), which will tell guest that FAR is
not valid and hold an UNKNOWN value. These values will be set to KVM
register structures through KVM_SET_ONE_REG IOCTL.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-10-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_hwpoison_page_add() and kvm_unpoison_all() will both
be used by X86 and ARM platforms, so moving them into
"accel/kvm/kvm-all.c" to avoid duplicate code.
For architectures that don't use the poison-list functionality
the reset handler will harmlessly do nothing, so let's register
the kvm_unpoison_all() function in the generic kvm_init() function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Message-id: 20200512030609.19593-8-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes the following coccinelle warnings:
$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_err.cocci
...
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We should only pass in gdb_get_reg16() with the GByteArray* object
itself, no need to shift. Without this patch, gdb remote attach will
crash QEMU:
(gdb) target remote :1234
Remote debugging using :1234
Remote communication error. Target disconnected.: Connection reset by peer.
$ qemu-system-x86_64 -m 1G -smp 4 ... -s
ERROR:qemu/gdbstub.c:1843:handle_read_all_regs: assertion failed: (len == gdbserver_state.mem_buf->len)
Bail out! ERROR:qemu/gdbstub.c:1843:handle_read_all_regs: assertion failed: (len == gdbserver_state.mem_buf->len)
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200409164954.36902-3-peterx@redhat.com>
Message-Id: <20200414200631.12799-12-alex.bennee@linaro.org>
Patch acb9f95a7c "i386: Fix GCC warning with snprintf when HAX
is enabled" replaced Windows device names with posix device
names. Revert this.
Fixes: acb9f95a7c "i386: Fix GCC warning with snprintf when HAX is enabled"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200322210211.29603-1-vr_qemu@t-online.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 048c95163b ("target/i386: work around KVM_GET_MSRS bug for
secondary execution controls") added a workaround for KVM pre-dating
commit 6defc591846d ("KVM: nVMX: include conditional controls in /dev/kvm
KVM_GET_MSRS") which wasn't setting certain available controls. The
workaround uses generic CPUID feature bits to set missing VMX controls.
It was found that in some cases it is possible to observe hosts which
have certain CPUID features but lack the corresponding VMX control.
In particular, it was reported that Azure VMs have RDSEED but lack
VMX_SECONDARY_EXEC_RDSEED_EXITING; attempts to enable this feature
bit result in QEMU abort.
Resolve the issue but not applying the workaround when we don't have
to. As there is no good way to find out if KVM has the fix itself, use
95c5c7c77c ("KVM: nVMX: list VMX MSRs in KVM_GET_MSR_INDEX_LIST") instead
as these [are supposed to] come together.
Fixes: 048c95163b ("target/i386: work around KVM_GET_MSRS bug for secondary execution controls")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200331162752.1209928-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sequence of instructions exposes an issue:
sti
hlt
Interrupts cannot be delivered to hvf after hlt instruction cpu because
HF_INHIBIT_IRQ_MASK is set just before hlt is handled and never reset
after moving instruction pointer beyond hlt.
So, after hvf_vcpu_exec() returns, CPU thread gets locked up forever in
qemu_wait_io_event() (cpu_thread_is_idle() evaluates inhibition
flag and considers the CPU idle if the flag is set).
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200328174411.51491-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current Icelake-Server CPU model lacks all the features enumerated by
MSR_IA32_ARCH_CAPABILITIES.
Add them, so that guest of "Icelake-Server" can see all of them.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200316095605.12318-1-xiaoyao.li@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The CPUID level need to be set to 0x14 manually on old
machine-type if Intel PT is enabled in guest. E.g. the
CPUID[0].EAX(level)=7 and CPUID[7].EBX[25](intel-pt)=1 when the
Qemu with "-machine pc-i440fx-3.1 -cpu qemu64,+intel-pt" parameter.
Some Intel PT capabilities are exposed by leaf 0x14 and the
missing capabilities will cause some MSRs access failed.
This patch add a warning message to inform the user to extend
the CPUID level.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1584031686-16444-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If the system is numa configured the pkg_offset needs
to be adjusted for EPYC cpu models. Fix it calling the
model specific handler.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396725589.58170.16424607815207074485.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The APIC ID is decoded based on the sequence sockets->dies->cores->threads.
This works fine for most standard AMD and other vendors' configurations,
but this decoding sequence does not follow that of AMD's APIC ID enumeration
strictly. In some cases this can cause CPU topology inconsistency.
When booting a guest VM, the kernel tries to validate the topology, and finds
it inconsistent with the enumeration of EPYC cpu models. The more details are
in the bug https://bugzilla.redhat.com/show_bug.cgi?id=1728166.
To fix the problem we need to build the topology as per the Processor
Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1
Processors. The documentation is available from the bugzilla Link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
It is also available at
https://www.amd.com/system/files/TechDocs/55570-B1_PUB.zip
Here is the text from the PPR.
Operating systems are expected to use Core::X86::Cpuid::SizeId[ApicIdSize], the
number of least significant bits in the Initial APIC ID that indicate core ID
within a processor, in constructing per-core CPUID masks.
Core::X86::Cpuid::SizeId[ApicIdSize] determines the maximum number of cores
(MNC) that the processor could theoretically support, not the actual number of
cores that are actually implemented or enabled on the processor, as indicated
by Core::X86::Cpuid::SizeId[NC].
Each Core::X86::Apic::ApicId[ApicId] register is preset as follows:
• ApicId[6] = Socket ID.
• ApicId[5:4] = Node ID.
• ApicId[3] = Logical CCX L3 complex ID
• ApicId[2:0]= (SMT) ? {LogicalCoreID[1:0],ThreadId} : {1'b0,LogicalCoreID[1:0]}
The new apic id encoding is enabled for EPYC and EPYC-Rome models.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <158396724913.58170.3539083528095710811.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a boolean variable use_epyc_apic_id_encoding in X86CPUDefinition.
This will be set if this cpu model needs to use new EPYC based
apic id encoding.
Override the handlers with EPYC based handlers if use_epyc_apic_id_encoding
is set. This will be done in x86_cpus_init.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158396723514.58170.14825482171652019765.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the new functions from topology.h and delete the unused code. Given the
sockets, nodes, cores and threads, the new functions generate apic id for EPYC
mode. Removes all the hardcoded values.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <158396722151.58170.8031705769621392927.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Notice the magic page during translate, much like we already
do for the arm32 commpage. At runtime, raise an exception to
return cpu_loop for emulation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are not short of numbers for EXCP_*. There is no need to confuse things
by having EXCP_VMEXIT and EXCP_SYSCALL overlap, even though the former is
only used for system mode and the latter is only used for user mode.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
-----BEGIN PGP SIGNATURE-----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=9fEL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue for 5.0 soft freeze
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
hw/i386: Update structures to save the number of nodes per package
hw/i386: Remove unnecessary initialization in x86_cpu_new
machine: Add SMP Sockets in CpuTopology
hw/i386: Consolidate topology functions
hw/i386: Introduce X86CPUTopoInfo to contain topology info
cpu: Use DeviceClass reset instead of a special CPUClass reset
machine/memory encryption: Disable mem merge
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
i386: Add 2nd Generation AMD EPYC processors
i386: Add missing cpu feature bits in EPYC model
target/i386: Add new property note to versioned CPU models
target/i386: Add Denverton-v2 (no MPX) CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update structures X86CPUTopoIDs and CPUX86State to hold the number of
nodes per package. This is required to build EPYC mode topology.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396720035.58170.1973738805301006456.stgit@naples-babu.amd.com>
Now that we have all the parameters in X86CPUTopoInfo, we can just
pass the structure to calculate the offsets and width.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396717953.58170.5628042059144117669.stgit@naples-babu.amd.com>
The CPUClass has a 'reset' method. This is a legacy from when
TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any
more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()'
function is kept as the API which most places use to reset a CPU; it
is now a wrapper which calls device_cold_reset() and then the
tracepoint function.
This change should not cause CPU objects to be reset more often
than they are at the moment, because:
* nobody is directly calling device_cold_reset() or
qdev_reset_all() on CPU objects
* no CPU object is on a qbus, so they will not be reset either
by somebody calling qbus_reset_all()/bus_cold_reset(), or
by the main "reset sysbus and everything in the qbus tree"
reset that most devices are reset by
Note that this does not change the need for each machine or whatever
to use qemu_register_reset() to arrange to call cpu_reset() -- that
is necessary because CPU objects are not on any qbus, so they don't
get reset when the qbus tree rooted at the sysbus bus is reset, and
this isn't being changed here.
All the changes to the files under target/ were made using the
included Coccinelle script, except:
(1) the deletion of the now-inaccurate and not terribly useful
"CPUClass::reset" comments was done with a perl one-liner afterwards:
perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c
(2) this bit of the s390 change was done by hand, because the
Coccinelle script is not sophisticated enough to handle the
parent_reset call being inside another function:
| @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type)
| S390CPU *cpu = S390_CPU(s);
| S390CPUClass *scc = S390_CPU_GET_CLASS(cpu);
| CPUS390XState *env = &cpu->env;
|+ DeviceState *dev = DEVICE(s);
|
|- scc->parent_reset(s);
|+ scc->parent_reset(dev);
| cpu->env.sigp_order = 0;
| s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Adds the support for 2nd Gen AMD EPYC Processors. The model display
name will be EPYC-Rome.
Adds the following new feature bits on top of the feature bits from the
first generation EPYC models.
perfctr-core : core performance counter extensions support. Enables the VM to
use extended performance counter support. It enables six
programmable counters instead of four counters.
clzero : instruction zeroes out the 64 byte cache line specified in RAX.
xsaveerptr : XSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES always save error
pointers and FXRSTOR, XRSTOR, XRSTORS always restore error
pointers.
wbnoinvd : Write back and do not invalidate cache
ibpb : Indirect Branch Prediction Barrier
amd-stibp : Single Thread Indirect Branch Predictor
clwb : Cache Line Write Back and Retain
xsaves : XSAVES, XRSTORS and IA32_XSS support
rdpid : Read Processor ID instruction support
umip : User-Mode Instruction Prevention support
The Reference documents are available at
https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdfhttps://www.amd.com/system/files/TechDocs/24594.pdf
Depends on following kernel commits:
40bc47b08b6e ("kvm: x86: Enumerate support for CLZERO instruction")
504ce1954fba ("KVM: x86: Expose XSAVEERPTR to the guest")
6d61e3c32248 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
52297436199d ("kvm: svm: Update svm_xsaves_supported")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <157314966312.23828.17684821666338093910.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Adds the following missing CPUID bits:
perfctr-core : core performance counter extensions support. Enables the VM
to use extended performance counter support. It enables six
programmable counters instead of 4 counters.
clzero : instruction zeroes out the 64 byte cache line specified in RAX.
xsaveerptr : XSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES always save error
pointers and FXRSTOR, XRSTOR, XRSTORS always restore error
pointers.
ibpb : Indirect Branch Prediction Barrie.
xsaves : XSAVES, XRSTORS and IA32_XSS supported.
Depends on following kernel commits:
40bc47b08b6e ("kvm: x86: Enumerate support for CLZERO instruction")
504ce1954fba ("KVM: x86: Expose XSAVEERPTR to the guest")
52297436199d ("kvm: svm: Update svm_xsaves_supported")
These new features will be added in EPYC-v3. The -cpu help output after the change.
x86 EPYC-v1 AMD EPYC Processor
x86 EPYC-v2 AMD EPYC Processor (with IBPB)
x86 EPYC-v3 AMD EPYC Processor
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <157314965662.23828.3063243729449408327.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add additional information for -cpu help to indicate the changes in this
version of CPU model.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200212081328.7385-4-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Because MPX is being removed from the linux kernel, remove MPX feature
from Denverton.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200212081328.7385-2-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
This is cleaner than poking memory directly and will make later
clean-ups easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-14-alex.bennee@linaro.org>
WHPX wasn't using the proper synchronization primitives while
processing async events, which can cause issues with SMP.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When HAX is enabled (--enable-hax), GCC 9.2.1 reports issues with
snprintf(). Replacing old snprintf() by g_strdup_printf() fixes the
problem with boundary checks of vm_id and vcpu_id and finally the
warnings produced by GCC.
For more details, one example of warning:
CC i386-softmmu/target/i386/hax-posix.o
qemu/target/i386/hax-posix.c: In function ‘hax_host_open_vm’:
qemu/target/i386/hax-posix.c:124:56: error: ‘%02d’ directive output may be
truncated writing between 2 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
124 | snprintf(name, sizeof HAX_VM_DEVFS, "/dev/hax_vm/vm%02d", vm_id);
| ^~~~
qemu/target/i386/hax-posix.c:124:41: note: directive argument in the range
[-2147483648, 64]
124 | snprintf(name, sizeof HAX_VM_DEVFS, "/dev/hax_vm/vm%02d", vm_id);
| ^~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:867,
from qemu/include/qemu/osdep.h:99,
from qemu/target/i386/hax-posix.c:14:
/usr/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output
between 17 and 26 bytes into a destination of size 17
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several objects implemented their own uint property getters and setters,
despite them being straightforward (without any checks/validations on
the values themselves) and identical across objects. This makes use of
an enhanced API for object_property_add_uintXX_ptr() which offers
default setters.
Some of these setters used to update the value even if the type visit
failed (eg. because the value being set overflowed over the given type).
The new setter introduces a check for these errors, not updating the
value if an error occurred. The error is propagated.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, WHPX is using some default values for the trapped CPUID
functions. These were not in sync with the QEMU values because the
CPUID values were never set with WHPX during VCPU initialization.
Additionally, at the moment, WHPX doesn't support setting CPUID
values in the hypervisor at runtime (i.e. after the partition has
been setup). That is needed to be able to set the CPUID values in
the hypervisor during VCPU init.
Until that support comes, use the QEMU values for the trapped CPUIDs.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880A8323EAD0CD0E8E2F423C0EB0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, TSC is set as part of the VM runtime state. Setting TSC at
runtime is heavy and additionally can have side effects on the guest,
which are not very resilient to variances in the TSC. This patch uses
the VM state to determine whether to set TSC or not. Some minor
enhancements for getting TSC values as well that considers the VM state.
Additionally, while setting the TSC, the partition is suspended to
reduce the variance in the TSC value across vCPUs.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08804D23439166E81FF151F7C0EA0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fxam instruction returns the wrong result after fdecstp or after
an underflow. Check fptags to handle this.
Reported-by: <chengang@emindsoft.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use an explicit boolean type.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The address_space_rw() function allows either reads or writes
depending on the is_write argument passed to it; this is useful
when the direction of the access is determined programmatically
(as for instance when handling the KVM_EXIT_MMIO exit reason).
Under the hood it just calls either address_space_write() or
address_space_read_full().
We also use it a lot with a constant is_write argument, though,
which has two issues:
* when reading "address_space_rw(..., 1)" this is less
immediately clear to the reader as being a write than
"address_space_write(...)"
* calling address_space_rw() bypasses the optimization
in address_space_read() that fast-paths reads of a
fixed length
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.cocci.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org>
[PMD: Update macvm_set_cr0() reported by Laurent Vivier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since its introduction in commit ac1970fbe8, address_space_rw()
takes a boolean 'is_write' argument. Fix the codebase by using
an explicit boolean type.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Two lines in hw/net/dp8393x.c that Coccinelle produced that
were over 80 characters were re-wrapped by hand.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 812d49f2a3
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-12-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These two features were incorrectly tied to host_cpuid_required rather than
cpu->max_features. As a result, -cpu max was not enabling either MONITOR
features or ucode revision.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even though MSR_IA32_UCODE_REV has been available long before Linux 5.6,
which added it to the emulated MSR list, a bug caused the microcode
version to revert to 0x100000000 on INIT. As a result, processors other
than the bootstrap processor would not see the host microcode revision;
some Windows version complain loudly about this and crash with a
fairly explicit MICROCODE REVISION MISMATCH error.
[If running 5.6 prereleases, the kernel fix "KVM: x86: do not reset
microcode version on INIT or RESET" should also be applied.]
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: <20200211175516.10716-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
