Only qcow2 driver supports vmstate.
In qcow2 these requests go through .bdrv_co_p{read,write}v_part
handlers.
So, let's do our basic check for the request on vmstate generic
handlers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Split checking for reserved bits out of aligned offset check.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
- use g_autofree for l1_table
- better name for size in bytes variable
- reduce code blocks nesting
- whitespaces, braces, newlines
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Check subcluster bitmap of the l2 entry for different types of
clusters:
- for compressed it must be zero
- for allocated check consistency of two parts of the bitmap
- for unallocated all subclusters should be unallocated
(or zero-plain)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Message-Id: <20210914122454.141075-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll reuse the function to fix wrong L2 entry bitmap. Support it now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split fix_l2_entry_by_zero() out of check_refcounts_l2() to be
reused in further patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add helper to parse compressed l2_entry and use it everywhere instead
of open-coding.
Note, that in most places we move to precise coffset/csize instead of
sector-aligned. Still it should work good enough for updating
refcounts.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Let's pass the whole L2 entry and not bother with
L2E_COMPRESSED_OFFSET_SIZE_MASK.
It also helps further refactoring that adds generic
qcow2_parse_compressed_l2_entry() helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
- don't use same name for size in bytes and in entries
- use g_autofree for l2_table
- add whitespace
- fix block comment style
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is no conflict and no dependency if we have parallel writes to
different subclusters of one cluster when the cluster itself is already
allocated. So, relax extra dependency.
Measure performance:
First, prepare build/qemu-img-old and build/qemu-img-new images.
cd scripts/simplebench
./img_bench_templater.py
Paste the following to stdin of running script:
qemu_img=../../build/qemu-img-{old|new}
$qemu_img create -f qcow2 -o extended_l2=on /ssd/x.qcow2 1G
$qemu_img bench -c 100000 -d 8 [-s 2K|-s 2K -o 512|-s $((1024*2+512))] \
-w -t none -n /ssd/x.qcow2
The result:
All results are in seconds
------------------ --------- ---------
old new
-s 2K 6.7 ± 15% 6.2 ± 12%
-7%
-s 2K -o 512 13 ± 3% 11 ± 5%
-16%
-s $((1024*2+512)) 9.5 ± 4% 8.4
-12%
------------------ --------- ---------
So small writes are more independent now and that helps to keep deeper
io queue which improves performance.
271 iotest output becomes racy for three allocation in one cluster.
Second and third writes may finish in different order. Second and
third requests don't depend on each other any more. Still they both
depend on first request anyway. Filter out second and third write
offsets to cover both possible outputs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824101517.59802-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[hreitz: s/ an / and /]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
No logic change, just prepare for the following commit. While being
here do also small grammar fix in a comment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824101517.59802-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In mirror_iteration() we call mirror_wait_on_conflicts() with
`self` parameter set to NULL.
Starting from commit d44dae1a7c we dereference `self` pointer in
mirror_wait_on_conflicts() without checks if it is not NULL.
Backtrace:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
at ../block/mirror.c:172
172 self->waiting_for_op = op;
[Current thread is 1 (Thread 0x7f0908931ec0 (LWP 380249))]
(gdb) bt
#0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
at ../block/mirror.c:172
#1 0x00005610c5d9d631 in mirror_run (job=0x5610c76a2c00, errp=<optimized out>) at ../block/mirror.c:491
#2 0x00005610c5d58726 in job_co_entry (opaque=0x5610c76a2c00) at ../job.c:917
#3 0x00005610c5f046c6 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>)
at ../util/coroutine-ucontext.c:173
#4 0x00007f0909975820 in ?? () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
from /usr/lib64/libc.so.6
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001404
Fixes: d44dae1a7c ("block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210910124533.288318-1-sgarzare@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
bdrv_co_block_status() does it for us, we do not need to do it here.
The advantage of not capping *pnum is that bdrv_co_block_status() can
cache larger data regions than requested by its caller.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-7-hreitz@redhat.com>
bdrv_co_block_status() does it for us, we do not need to do it here.
The advantage of not capping *pnum is that bdrv_co_block_status() can
cache larger data regions than requested by its caller.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-6-hreitz@redhat.com>
bdrv_co_block_status() does it for us, we do not need to do it here.
The advantage of not capping *pnum is that bdrv_co_block_status() can
cache larger data regions than requested by its caller.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-5-hreitz@redhat.com>
As we have attempted before
(https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg06451.html,
"file-posix: Cache lseek result for data regions";
https://lists.nongnu.org/archive/html/qemu-block/2021-02/msg00934.html,
"file-posix: Cache next hole"), this patch seeks to reduce the number of
SEEK_DATA/HOLE operations the file-posix driver has to perform. The
main difference is that this time it is implemented as part of the
general block layer code.
The problem we face is that on some filesystems or in some
circumstances, SEEK_DATA/HOLE is unreasonably slow. Given the
implementation is outside of qemu, there is little we can do about its
performance.
We have already introduced the want_zero parameter to
bdrv_co_block_status() to reduce the number of SEEK_DATA/HOLE calls
unless we really want zero information; but sometimes we do want that
information, because for files that consist largely of zero areas,
special-casing those areas can give large performance boosts. So the
real problem is with files that consist largely of data, so that
inquiring the block status does not gain us much performance, but where
such an inquiry itself takes a lot of time.
To address this, we want to cache data regions. Most of the time, when
bad performance is reported, it is in places where the image is iterated
over from start to end (qemu-img convert or the mirror job), so a simple
yet effective solution is to cache only the current data region.
(Note that only caching data regions but not zero regions means that
returning false information from the cache is not catastrophic: Treating
zeroes as data is fine. While we try to invalidate the cache on zero
writes and discards, such incongruences may still occur when there are
other processes writing to the image.)
We only use the cache for nodes without children (i.e. protocol nodes),
because that is where the problem is: Drivers that rely on block-status
implementations outside of qemu (e.g. SEEK_DATA/HOLE).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/307
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210812084148.14458-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[hreitz: Added `local_file == bs` assertion, as suggested by Vladimir]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
gluster's block-status implementation is basically a copy of that in
block/file-posix.c, there is only one thing missing, and that is
aligning trailing data extents to the request alignment (as added by
commit 9c3db310ff).
Note that 9c3db310ff mentions that "there seems to be no other block
driver that sets request_alignment and [...]", but while block/gluster.c
does indeed not set request_alignment, block/io.c's
bdrv_refresh_limits() will still default to an alignment of 512 because
block/gluster.c does not provide a byte-aligned read function.
Therefore, unaligned tails can conceivably occur, and so we should apply
the change from 9c3db310ff to gluster's block-status implementation.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210805143603.59503-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We expect the first qemu_vfio_dma_map() to fail (indicating
DMA mappings exhaustion, see commit 15a730e7a3). Do not
report the first failure as error, since we are going to
flush the mappings and retry.
This removes spurious error message displayed on the monitor:
(qemu) c
(qemu) qemu-kvm: VFIO_MAP_DMA failed: No space left on device
(qemu) info status
VM status: running
Reported-by: Tingting Mao <timao@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-12-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently qemu_vfio_dma_map() displays errors on stderr.
When using management interface, this information is simply
lost. Pass qemu_vfio_dma_map() an Error** handle so it can
propagate the error to callers.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
nvme_create_queue_pair() does not return a boolean value (indicating
eventual error) but a pointer, and is inconsistent in how it fills the
error handler. To fulfill callers expectations, always set an error
message on failure.
Reported-by: Auger Eric <eric.auger@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-6-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix when building with -Wshorten-64-to-32:
warning: implicit conversion loses integer precision: 'unsigned long' to 'int' [-Wshorten-64-to-32]
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make 'qemu-img commit' work on Windows.
Command 'commit' requires reopening backing file in RW mode. So,
add reopen prepare/commit/abort handlers and change dwShareMode
for CreateFile call in order to allow further read/write reopening.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/418
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Tested-by: Helge Konetzka <hk@zapateado.de>
Message-Id: <20210825173625.19415-1-viktor.prutyanov@phystech.edu>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Include linux/fs.h to avoid the following build failure on uclibc or
musl raised since version 6.0.0:
../block/export/fuse.c: In function 'fuse_lseek':
../block/export/fuse.c:641:19: error: 'SEEK_HOLE' undeclared (first use in this function)
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
../block/export/fuse.c:641:19: note: each undeclared identifier is reported only once for each function it appears in
../block/export/fuse.c:641:42: error: 'SEEK_DATA' undeclared (first use in this function); did you mean 'SEEK_SET'?
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
| SEEK_SET
Fixes:
- http://autobuild.buildroot.org/results/33c90ebf04997f4d3557cfa66abc9cf9a3076137
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-Id: <20210827220301.272887-1-fontaine.fabrice@gmail.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The only caller pass copy_range and compress both false. Let's just
drop these arguments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824083856.17408-35-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Finally, copy-before-write gets own .bdrv_open and .bdrv_close
handlers, block_init() call and becomes available through bdrv_open().
To achieve this:
- cbw_init gets unused flags argument and becomes cbw_open
- block_copy_state_free() call moved to new cbw_close()
- in bdrv_cbw_append:
- options are completed with driver and node-name, and we can simply
use bdrv_insert_node() to do both open and drained replacing
- in bdrv_cbw_drop:
- cbw_close() is now responsible for freeing s->bcs, so don't do it
here
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-22-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Now block-copy will crash if user don't set progress meter by
block_copy_set_progress_meter(). copy-before-write filter will be used
in separate of backup job, and it doesn't want any progress meter (for
now). So, allow not setting it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-21-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to publish copy-before-write filter to be used in separate
of backup. Future step would support bitmap for the filter. But let's
start from full set bitmap.
We have to modify backup, as bitmap is first initialized by
copy-before-write filter, and then backup modifies it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
One more step closer to .bdrv_open(): use options instead of plain
arguments. Move to bdrv_open_child() calls, native for drive open
handlers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824083856.17408-19-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824083856.17408-18-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In the next commit we'll get rid of source argument of cbw_init().
Prepare to it now, to make next commit simpler: move the code block
that uses source below attaching the child and use bs->file->bs instead
of source variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
One more step closer to real .bdrv_open() handler: use more usual names
for bs being initialized and its state.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Move part of bdrv_cbw_append() to new function cbw_open(). It's an
intermediate step for adding normal .bdrv_open() handler to the
filter. With this commit no logic is changed, but we have a function
which will be turned into .bdrv_open() handler in future commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Refactor the function to replace child at last. Thus we don't need to
revert it and code is simplified.
block-copy state initialization being done before replacing the child
doesn't need any drained section.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to publish copy-before-write filter, and there no public
backing-child-based filter in Qemu. No reason to create a precedent, so
let's refactor copy-before-write filter instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
bdrv_attach_child() do bdrv_unref() on failure, so we shouldn't do it
by hand here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-12-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to publish copy-before-write filter. So, user should be
able to create it with blockdev-add first, specifying both filtered and
target children. And then do blockdev-reopen, to actually insert the
filter where needed.
Currently, filter unshares write permission unconditionally on source
node. It's good, but it will not allow to do blockdev-add. So, let's
relax restrictions when filter doesn't have any parent.
Test output is modified, as now permission conflict happens only when
job creates a blk parent for filter node.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The main consumer of cluster-size is block-copy. Let's calculate it
here instead of passing through backup-top.
We are going to publish copy-before-write filter soon, so it will be
created through options. But we don't want for now to make explicit
option for cluster-size, let's continue to calculate it automatically.
So, now is the time to get rid of cluster_size argument for
bdrv_cbw_append().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-10-vsementsov@virtuozzo.com>
[hreitz: Add qemu/error-report.h include to block/block-copy.c]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to publish copy-before-write filter, so it would be
initialized through options. Still we don't want to publish compress
and copy-range options, as
1. Modern way to enable compression is to use compress filter.
2. For copy-range it's unclean how to make proper interface:
- it's has experimental prefix for backup job anyway
- the whole BackupPerf structure doesn't make sense for the filter
So, let's just add copy-range possibility to the filter later if
needed.
Still, we are going to continue support for compression and
experimental copy-range in backup job. So, set these options after
filter creation.
Note, that we can drop "compress" argument of bdrv_cbw_append() now, as
well as "perf". The only reason not doing so is that now, when I
prepare this patch the big series around it is already reviewed and I
want to avoid extra rebase conflicts to simplify review of the
following version.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824083856.17408-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll need a possibility to set compress and use_copy_range options
after initialization of the state. So make corresponding part of
block_copy_state_new() separate and public.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824083856.17408-8-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want to simplify initialization interface of copy-before-write
filter as we are going to make it public. So, let's detect fleecing
scheme exactly in block-copy code, to not pass this information through
extra levels.
Why not just set BDRV_REQ_SERIALISING unconditionally: because we are
going to implement new more efficient fleecing scheme which will not
rely on backing feature.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824083856.17408-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to convert backup_top to full featured public filter,
which can be used in separate of backup job. Start from renaming from
"how it used" to "what it does".
While updating comments in 283 iotest, drop and rephrase also things
about ".active", as this field is now dropped, and filter doesn't have
"inactive" mode.
Note that this change may be considered as incompatible interface
change, as backup-top filter format name was visible through
query-block and query-named-block-nodes.
Still, consider the following reasoning:
1. backup-top was never documented, so if someone depends on format
name (for driver that can't be used other than it is automatically
inserted on backup job start), it's a kind of "undocumented feature
use". So I think we are free to change it.
2. There is a hope, that there is no such users: it's a lot more native
to give a good node-name to backup-top filter if need to operate
with it somehow, and don't touch format name.
3. Another "incompatible" change in further commit would be moving
copy-before-write filter from using backing child to file child. And
this is even more reasonable than renaming: for now all public
filters are file-child based.
So, it's a risky change, but risk seems small and good interface worth
it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to change bs inside blk.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The following command-line fails due to a permissions conflict:
$ qemu-storage-daemon \
--blockdev driver=nvme,node-name=nvme0,device=0000:08:00.0,namespace=1 \
--blockdev driver=raw,node-name=l1-1,file=nvme0,offset=0,size=1073741824 \
--blockdev driver=raw,node-name=l1-2,file=nvme0,offset=1073741824,size=1073741824 \
--nbd-server addr.type=unix,addr.path=/tmp/nbd.sock,max-connections=2 \
--export type=nbd,id=nbd-l1-1,node-name=l1-1,name=l1-1,writable=on \
--export type=nbd,id=nbd-l1-2,node-name=l1-2,name=l1-2,writable=on
qemu-storage-daemon: --export type=nbd,id=nbd-l1-1,node-name=l1-1,name=l1-1,writable=on: Permission conflict on node 'nvme0': permissions 'resize' are both required by node 'l1-1' (uses node 'nvme0' as 'file' child) and unshared by node 'l1-2' (uses node 'nvme0' as 'file' child).
The problem is that block/raw-format.c relies on bdrv_default_perms() to
set permissions on the nvme node. The default permissions add RESIZE in
anticipation of a format driver like qcow2 that needs to grow the image
file. This fails because RESIZE is unshared, so we cannot get the RESIZE
permission.
Max Reitz pointed out that block/crypto.c already handles this case by
implementing a custom ->bdrv_child_perm() function that adjusts the
result of bdrv_default_perms().
This patch takes the same approach in block/raw-format.c so that RESIZE
is only required if it's actually necessary (e.g. the parent is qcow2).
Cc: Max Reitz <mreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210726122839.822900-1-stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20210802062507.347555-1-maozhongyi@cmss.chinamobile.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Fix the following build failure on musl raised since version 6.0.0 and
4ca37a96a7
because musl does not define FALLOC_FL_ZERO_RANGE:
../block/export/fuse.c: In function 'fuse_fallocate':
../block/export/fuse.c:563:23: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
563 | } else if (mode & FALLOC_FL_ZERO_RANGE) {
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/b96e3d364fd1f8bbfb18904a742e73327d308f64
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-Id: <20210809095101.1101336-1-fontaine.fabrice@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
When bdrv_pad_request() fails in bdrv_co_preadv_part(), bs->in_flight
has been increased, but is never decreased again. This leads to a hang
when trying to drain the block node.
This bug was observed with Windows guests which issue a request that
fully uses IOV_MAX during installation, so that when padding is
necessary (O_DIRECT with a 4k sector size block device on the host),
adding another entry causes failure.
Call bdrv_dec_in_flight() to fix this. There is a larger problem to
solve here because this request shouldn't even fail, but Windows doesn't
seem to care and with this minimal fix the installation succeeds. So
given that we're already in freeze, let's take this minimal fix for 6.1.
Fixes: 98ca45494f
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1972079
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210727154923.91067-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Linux SCSI can throw spurious -EAGAIN in some corner cases in its
completion path, which will end up being the result in the completed
io_uring request.
Resubmitting such requests should allow block jobs to complete, even
if such spurious errors are encountered.
Co-authored-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-id: 20210729091029.65369-1-f.ebner@proxmox.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the NVMe block driver was introduced (see commit bdd6a90a9e,
January 2018), Linux VFIO_IOMMU_MAP_DMA ioctl was only returning
-ENOMEM in case of error. The driver was correctly handling the
error path to recycle its volatile IOVA mappings.
To fix CVE-2019-3882, Linux commit 492855939bdb ("vfio/type1: Limit
DMA mappings per container", April 2019) added the -ENOSPC error to
signal the user exhausted the DMA mappings available for a container.
The block driver started to mis-behave:
qemu-system-x86_64: VFIO_MAP_DMA failed: No space left on device
(qemu)
(qemu) info status
VM status: paused (io-error)
(qemu) c
VFIO_MAP_DMA failed: No space left on device
(qemu) c
VFIO_MAP_DMA failed: No space left on device
(The VM is not resumable from here, hence stuck.)
Fix by handling the new -ENOSPC error (when DMA mappings are
exhausted) without any distinction to the current -ENOMEM error,
so we don't change the behavior on old kernels where the CVE-2019-3882
fix is not present.
An easy way to reproduce this bug is to restrict the DMA mapping
limit (65535 by default) when loading the VFIO IOMMU module:
# modprobe vfio_iommu_type1 dma_entry_limit=666
Cc: qemu-stable@nongnu.org
Cc: Fam Zheng <fam@euphon.net>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Michal Prívozník <mprivozn@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210723195843.1032825-1-philmd@redhat.com
Fixes: bdd6a90a9e ("block: Add VFIO based NVMe driver")
Buglink: https://bugs.launchpad.net/qemu/+bug/1863333
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/65
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Enhance the test to demonstrate existing less-than-stellar behavior of
qemu-img with a qcow2 image containing an inconsistent bitmap: we
don't diagnose the problem until after copying the entire image (a
potentially long time), and when we do diagnose the failure, we still
end up leaving an empty bitmap in the destination. This mess will be
cleaned up in the next patch.
While at it, rename the test now that we support useful iotest names,
and fix a missing newline in the error message thus exposed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210709153951.2801666-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
When there are multiple queues attached to the same AIO context,
some requests may experience high latency, since in the worst case
the AIO engine queue is only flushed when it is full (MAX_EVENTS) or
there are no more queues plugged.
Commit 2558cb8dd4 ("linux-aio: increasing MAX_EVENTS to a larger
hardcoded value") changed MAX_EVENTS from 128 to 1024, to increase
the number of in-flight requests. But this change also increased
the potential maximum batch to 1024 elements.
When there is a single queue attached to the AIO context, the issue
is mitigated from laio_io_unplug() that will flush the queue every
time is invoked since there can't be others queue plugged.
Let's use the new `aio-max-batch` IOThread parameter to mitigate
this issue, limiting the number of requests in a batch.
We also define a default value (32): this value is obtained running
some benchmarks and it represents a good tradeoff between the latency
increase while a request is queued and the cost of the io_submit(2)
system call.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-4-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When invoking block-export-add with some iothread and
fixed-iothread=false, and changing the node's iothread fails, the error
is supposed to be ignored.
However, it is still stored in *errp, which is wrong. If a second error
occurs, the "*errp must be NULL" assertion in error_setv() fails:
qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion
`*errp == NULL' failed.
So if fixed-iothread=false, we should ignore the error by passing NULL
to bdrv_try_set_aio_context().
Fixes: f51d23c80a
("block/export: add iothread and fixed-iothread options")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210624083825.29224-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most probably this fake backing child doesn't work anyway (see notes
about it in a8a4d15c1c).
Still, since 25f78d9e2d drivers are required to set
.supports_backing if they want to call bdrv_set_backing_hd, so now
vvfat just doesn't work because of this check.
Let's finally drop this fake backing file.
Fixes: 25f78d9e2d
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210715124853.13335-1-vsementsov@virtuozzo.com>
Tested-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove the workaround introduced in commit
6ecbc6c526
"replication: Avoid blk_make_empty() on read-only child".
It is not needed anymore since s->hidden_disk is guaranteed to be
writable when secondary_do_checkpoint() runs. Because replication_start(),
_do_checkpoint() and _stop() are only called by COLO migration code
and COLO-migration activates all disks via bdrv_invalidate_cache_all()
before it calls these functions.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <d3acfad43879e9f376bffa7dd797ae74d0a7c81a.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The replication driver needs access to the children block-nodes of
it's child so it can issue bdrv_make_empty() and bdrv_co_pwritev()
to manage the replication. However, it does this by directly copying
the BdrvChilds, which is wrong.
Fix this by properly attaching the block-nodes with
bdrv_attach_child() and requesting the required permissions.
This ultimatively fixes a potential crash in replication_co_writev(),
because it may write to s->secondary_disk if it is in state
BLOCK_REPLICATION_FAILOVER_FAILED, without requesting write
permissions first. And now the workaround in
secondary_do_checkpoint() can be removed.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <5d0539d729afb8072d0d7cde977c5066285591b4.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation for the next patch, initialize s->hidden_disk and
s->secondary_disk later and replace access to them with local variables
in the places where they aren't initialized yet.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1eb9dc179267207d9c7eccaeb30761758e32e9ab.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
s->active_disk is bs->file. Remove it and use local variables instead.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <2534f867ea9be5b666dfce19744b7d4e2b96c976.1626619393.git.lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's possible that requests start to wait each other in
mirror_wait_on_conflicts(). To avoid it let's use same technique as in
block/io.c in bdrv_wait_serialising_requests_locked() /
bdrv_find_conflicting_request(): don't wait on intersecting request if
it is already waiting for some other request.
For details of the dead-lock look at testIntersectingActiveIO()
test-case which we actually fixing now.
Fixes: d06107ade0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field is unused, but it very helpful for debugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First, categorize the structure fields to identify what needs
to be protected and what doesn't.
We essentially need to protect only .state, and the 3 lists in
BDRVBlkdebugState.
Then, add the lock and mark the functions accordingly.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210614082931.24925-7-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There seems to be no benefit in using a field. Replace it with a local
variable, and move the state update before the yields.
The state update has do be done before the yields because now using
a local variable does not allow the new updated state to be visible
by the other yields.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210614082931.24925-6-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
That would be unsafe in case a rule other than the current one
is removed while the coroutine has yielded.
Keep FOREACH_SAFE because suspend_request deletes the current rule.
After this patch, *all* matching rules are deleted before suspending
the coroutine, rather than just one.
This doesn't affect the existing testcases.
Use actions_count to see how many yield to issue.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210614082931.24925-5-eesposit@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a counter for each action that a rule can trigger.
This is mainly used to keep track of how many coroutine_yield()
we need to perform after processing all rules in the list.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210614082931.24925-4-eesposit@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We want to move qemu_coroutine_yield() after the loop on rules,
because QLIST_FOREACH_SAFE is wrong if the rule list is modified
while the coroutine has yielded. Therefore move the suspended
request to the heap and clean it up from the remove side.
All that is left is for blkdebug_debug_event to handle the
yielding.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210614082931.24925-3-eesposit@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Extract to a separate function. Do not rely on FOREACH_SAFE, which is
only "safe" if the *current* node is removed---not if another node is
removed. Instead, just walk the entire list from the beginning when
asked to resume all suspended requests with a given tag.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210614082931.24925-2-eesposit@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Although unlikely, qemu might hang in nbd_send_request().
Allow recovery in this case by registering the yank function before
calling it.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <20210704000730.1befb596@gecko.fritz.box>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
-----BEGIN PGP SIGNATURE-----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=kH+r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
# gpg: Signature made Fri 09 Jul 2021 13:49:22 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (28 commits)
block: Make blockdev-reopen stable API
iotests: Test reopening multiple devices at the same time
block: Support multiple reopening with x-blockdev-reopen
block: Acquire AioContexts during bdrv_reopen_multiple()
block: Add bdrv_reopen_queue_free()
qcow2: Fix dangling pointer after reopen for 'file'
qemu-img: Improve error for rebase without backing format
qemu-img: Require -F with -b backing image
qcow2: Prohibit backing file changes in 'qemu-img amend'
blockdev: fix drive-backup transaction endless drained section
vhost-user: Fix backends without multiqueue support
MAINTAINERS: add block/rbd.c reviewer
block/rbd: fix type of task->complete
iotests/fuse-allow-other: Test allow-other
iotests/308: Test +w on read-only FUSE exports
export/fuse: Let permissions be adjustable
export/fuse: Give SET_ATTR_SIZE its own branch
export/fuse: Add allow-other option
export/fuse: Pass default_permissions for mount
util/uri: do not check argument of uri_free()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-14-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While most libraries do not need a CONFIG_* symbol because the
"when:" clauses are enough, some do. Add them back or stop
using them if possible.
In the case of libpmem, the statement to add the CONFIG_* symbol
was still in configure, but could not be triggered because it
checked for "no" instead of "disabled" (and it would be wrong anyway
since the test for the library has not been done yet).
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 587d59d6cc ("configure, meson: convert virgl detection to meson", 2021-07-06)
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Fixes: 53c22b68e3 ("configure, meson: convert liburing detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the BlockReopenQueue can contain nodes in multiple AioContexts, only
one of which may be locked when AIO_WAIT_WHILE() can be called, we can't
let the caller lock the right contexts. Instead, individually lock the
AioContext of a single node when iterating the queue.
Reintroduce bdrv_reopen() as a wrapper for reopening a single node that
drains the node and temporarily drops the AioContext lock for
bdrv_reopen_multiple().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210708114709.206487-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without an external data file, s->data_file is a second pointer with the
same value as bs->file. When changing bs->file to a different BdrvChild
and freeing the old BdrvChild, s->data_file must also be updated,
otherwise it points to freed memory and causes crashes.
This problem was caught by iotests case 245.
Fixes: df2b7086f169239ebad5d150efa29c9bb6d4f820
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210708114709.206487-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This was deprecated back in bc5ee6da7 (qcow2: Deprecate use of
qemu-img amend to change backing file), and no one in the meantime has
given any reasons why it should be supported. Time to make change
attempts a hard error (but for convenience, specifying the _same_
backing chain is not forbidden). Update a couple of iotests to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210503213600.569128-2-eblake@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
task->complete is a bool not an integer.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20210707180449.32665-1-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow changing the file mode, UID, and GID through SETATTR.
Without allow_other, UID and GID are not allowed to be changed, because
it would not make sense. Also, changing group or others' permissions
is not allowed either.
For read-only exports, +w cannot be set.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210625142317.271673-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to support changing other attributes than the file size in
fuse_setattr(), we have to give each its own independent branch. This
also applies to the only attribute we do support right now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210625142317.271673-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without the allow_other mount option, no user (not even root) but the
one who started qemu/the storage daemon can access the export. Allow
users to configure the export such that such accesses are possible.
While allow_other is probably what users want, we cannot make it an
unconditional default, because passing it is only possible (for non-root
users) if the global fuse.conf configuration file allows it. Thus, the
default is an 'auto' mode, in which we first try with allow_other, and
then fall back to without.
FuseExport.allow_other reports whether allow_other was actually used as
a mount option or not. Currently, this information is not used, but a
future patch will let this field decide whether e.g. an export's UID and
GID can be changed through chmod.
One notable thing about 'auto' mode is that libfuse may print error
messages directly to stderr, and so may fusermount (which it executes).
Our export code cannot really filter or hide them. Therefore, if 'auto'
fails its first attempt and has to fall back, fusermount will print an
error message that mounting with allow_other failed.
This behavior necessitates a change to iotest 308, namely we need to
filter out this error message (because if the first attempt at mounting
with allow_other succeeds, there will be no such message).
Furthermore, common.rc's _make_test_img should use allow-other=off for
FUSE exports, because iotests generally do not need to access images
from other users, so allow-other=on or allow-other=auto have no
advantage. OTOH, allow-other=on will not work on systems where
user_allow_other is disabled, and with allow-other=auto, we get said
error message that we would need to filter out again. Just disabling
allow-other is simplest.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210625142317.271673-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We do not do any permission checks in fuse_open(), so let the kernel do
them. We already let fuse_getattr() report the proper UNIX permissions,
so this should work the way we want.
This causes a change in 308's reference output, because now opening a
non-writable export with O_RDWR fails already, instead of only actually
attempting to write to it. (That is an improvement.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210625142317.271673-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
uri_free() checks if its argument is NULL in uri_clean() and g_free().
There is no need to check the argument before the call.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Message-Id: <20210629063602.4239-1-xypron.glpk@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
librbd supports 1 byte alignment for all aio operations.
Currently, there is no API call to query limits from the Ceph
ObjectStore backend. So drop the bdrv_refresh_limits completely
until there is such an API call.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-7-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch wittingly sets BDRV_REQ_NO_FALLBACK and silently ignores
BDRV_REQ_MAY_UNMAP for older librbd versions.
The rationale for this is as follows (citing Ilya Dryomov current RBD
maintainer):
---8<---
a) remove the BDRV_REQ_MAY_UNMAP check in qemu_rbd_co_pwrite_zeroes()
and as a consequence always unmap if librbd is too old
It's not clear what qemu's expectation is but in general Write
Zeroes is allowed to unmap. The only guarantee is that subsequent
reads return zeroes, everything else is a hint. This is how it is
specified in the kernel and in the NVMe spec.
In particular, block/nvme.c implements it as follows:
if (flags & BDRV_REQ_MAY_UNMAP) {
cdw12 |= (1 << 25);
}
This sets the Deallocate bit. But if it's not set, the device may
still deallocate:
"""
If the Deallocate bit (CDW12.DEAC) is set to '1' in a Write Zeroes
command, and the namespace supports clearing all bytes to 0h in the
values read (e.g., bits 2:0 in the DLFEAT field are set to 001b)
from a deallocated logical block and its metadata (excluding
protection information), then for each specified logical block, the
controller:
- should deallocate that logical block;
...
If the Deallocate bit is cleared to '0' in a Write Zeroes command,
and the namespace supports clearing all bytes to 0h in the values
read (e.g., bits 2:0 in the DLFEAT field are set to 001b) from
a deallocated logical block and its metadata (excluding protection
information), then, for each specified logical block, the
controller:
- may deallocate that logical block;
"""
https://nvmexpress.org/wp-content/uploads/NVM-Express-NVM-Command-Set-Specification-2021.06.02-Ratified-1.pdf
b) set BDRV_REQ_NO_FALLBACK in supported_zero_flags
Again, it's not clear what qemu expects here, but without it we end
up in a ridiculous situation where specifying the "don't allow slow
fallback" switch immediately fails all efficient zeroing requests on
a device where Write Zeroes is always efficient:
$ qemu-io -c 'help write' | grep -- '-[zun]'
-n, -- with -z, don't allow slow fallback
-u, -- with -z, allow unmapping
-z, -- write zeroes using blk_co_pwrite_zeroes
$ qemu-io -f rbd -c 'write -z -u -n 0 1M' rbd:foo/bar
write failed: Operation not supported
--->8---
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-6-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-5-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While at it just call rbd_get_size and avoid rbd_image_info_t.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-4-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-3-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ceph Luminous (version 12.2.z) is almost 4 years old at this point.
Bump the requirement to get rid of the ifdef'ry in the code.
Qemu 6.1 dropped the support for RHEL-7 which was the last supported
OS that required an older librbd.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-2-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Starting from ceph Pacific, RBD has built-in support for image-level encryption.
Currently supported formats are LUKS version 1 and 2.
There are 2 new relevant librbd APIs for controlling encryption, both expect an
open image context:
rbd_encryption_format: formats an image (i.e. writes the LUKS header)
rbd_encryption_load: loads encryptor/decryptor to the image IO stack
This commit extends the qemu rbd driver API to support the above.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20210627114635.39326-1-oro@il.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the SSH block driver supports MD5 and SHA1 for host key
fingerprints. This is a cryptographically sensitive operation and
so these hash algorithms are inadequate by modern standards. This
adds support for SHA256 which has been supported in libssh since
the 0.8.1 release.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210622115156.138458-1-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid accessing QCryptoTLSCreds internals by using
the qcrypto_tls_creds_check_endpoint() helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210628121133.193984-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No need to start a tracked request that will always fail. The choice
to check read-only after bdrv_inc_in_flight() predates 1bc5f09f2e
(block: Use tracked request for truncate), but waiting for serializing
requests can make the effect more noticeable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210609163034.997943-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----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=JXBO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vsementsov/tags/pull-jobs-2021-06-25' into staging
block: Make block-copy API thread-safe
# gpg: Signature made Fri 25 Jun 2021 13:40:24 BST
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* remotes/vsementsov/tags/pull-jobs-2021-06-25:
block-copy: atomic .cancelled and .finished fields in BlockCopyCallState
block-copy: add CoMutex lock
block-copy: move progress_set_remaining in block_copy_task_end
block-copy: streamline choice of copy_range vs. read/write
block-copy: small refactor in block_copy_task_entry and block_copy_common
co-shared-resource: protect with a mutex
progressmeter: protect with a mutex
blockjob: let ratelimit handle a speed of 0
block-copy: let ratelimit handle a speed of 0
ratelimit: treat zero speed as unlimited
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By adding acquire/release pairs, we ensure that .ret and .error_is_read
fields are written by block_copy_dirty_clusters before .finished is true,
and that they are read by API user after .finished is true.
The atomic here are necessary because the fields are concurrently modified
in coroutines, and read outside.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210624072043.180494-6-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Group various structures fields, to better understand what we need to
protect with a lock and what doesn't need it.
Then, add a CoMutex to protect concurrent access of block-copy
data structures. This mutex also protects .copy_bitmap, because its thread-safe
API does not prevent it from assigning two tasks to the same
bitmap region.
Exceptions to the lock:
- .sleep_state is handled in the series "coroutine: new sleep/wake API"
and thus here left as TODO.
- .finished, .cancelled and reads to .ret and .error_is_read will be
protected in the following patch, because are used also outside
coroutines.
- .skip_unallocated is atomic. Including it under the mutex would
increase the critical sections and make them also much more complex.
We can have it as atomic since it is only written from outside and
read by block-copy coroutines.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210624072043.180494-5-eesposit@redhat.com>
[vsementsov: fix typo in comment]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Moving this function in task_end ensures to update the progress
anyways, even if there is an error.
It also helps in next patch, allowing task_end to have only
one critical section.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210624072043.180494-4-eesposit@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Put the logic to determine the copy size in a separate function, so
that there is a simple state machine for the possible methods of
copying data from one BlockDriverState to the other.
Use .method instead of .copy_range as in-out argument, and
include also .zeroes as an additional copy method.
While at it, store the common computation of block_copy_max_transfer
into a new field of BlockCopyState, and make sure that we always
obey max_transfer; that's more efficient even for the
COPY_RANGE_READ_WRITE case.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210624072043.180494-3-eesposit@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Use a local variable instead of referencing BlockCopyState through a
BlockCopyCallState or BlockCopyTask every time.
This is in preparation for next patches.
No functional change intended.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210624072043.180494-2-eesposit@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Progressmeter is protected by the AioContext mutex, which
is taken by the block jobs and their caller (like blockdev).
We would like to remove the dependency of block layer code on the
AioContext mutex, since most drivers and the core I/O code are already
not relying on it.
Create a new C file to implement the ProgressMeter API, but keep the
struct as public, to avoid forcing allocation on the heap.
Also add a mutex to be able to provide an accurate snapshot of the
progress values to the caller.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210614081130.22134-5-eesposit@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210614081130.22134-3-eesposit@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Similar to other handle_aiocb_* functions, handle_aiocb_ioctl needs to cater
for the possibility that ioctl is interrupted by a signal. Otherwise, the
I/O is incorrectly reported as a failure to the guest.
Reported-by: Gordon Watson <gwatson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iOS hosts do not have these defined so we fallback to the
default behaviour.
Co-authored-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Try all the possible ioctls for disk size as long as they are
supported, to keep the #if ladder simple.
Extracted and cleaned up from a patch by Joelle van Dyne and
Warner Losh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Darwin (iOS), there are no system level APIs for directly accessing
host block devices. We detect this at configure time.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-2-j@getutm.app>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bs->sg is only true for character devices, but block devices can also
be used with scsi-block and scsi-generic. Unfortunately BLKSECTGET
returns bytes in an int for /dev/sgN devices, and sectors in a short
for block devices, so account for that in the code.
The maximum transfer also need not be a power of 2 (for example I have
seen disks with 1280 KiB maximum transfer) so there's no need to pass
the result through pow2floor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Block device requests must be aligned to bs->bl.request_alignment.
It makes sense for drivers to align bs->bl.max_transfer the same
way; however when there is no specified limit, blk_get_max_transfer
just returns INT_MAX. Since the contract of the function does not
specify that INT_MAX means "no maximum", just align the outcome
of the function (whether INT_MAX or bs->bl.max_transfer) before
returning it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I/O to a disk via read/write is not limited by the number of segments allowed
by the host adapter; the kernel can split requests if needed, and the limit
imposed by the host adapter can be very low (256k or so) to avoid that SG_IO
returns EINVAL if memory is heavily fragmented.
Since this value is only interesting for SG_IO-based I/O, do not include
it in the max_transfer and only take it into account when patching the
block limits VPD page in the scsi-generic device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Even though it was only called for devices that have bs->sg set (which
must be character devices), sg_get_max_segments looked at /sys/dev/block
which only works for block devices.
On Linux the sg driver has its own way to provide the maximum number of
iovecs in a scatter/gather list, so add support for it. The block device
path is kept because it will be reinstated in the next patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In the bdrv_snapshot_goto() fallback code, we work with a pointer to
either bs->file or bs->backing. We detach that child, close the node
(with .bdrv_close()), apply the snapshot on the child node, and then
re-open the node (with .bdrv_open()).
In order for .bdrv_open() to attach the same child node that we had
before, we pass "file={child-node}" or "backing={child-node}" to it.
Therefore, when .bdrv_open() has returned success, we can assume that
bs->file or bs->backing (respectively) points to our original child
again. This is verified by an assertion.
All of this is not immediately clear from a quick glance at the code,
so add a comment to the assertion what it is for, and why it is valid.
It certainly confused Coverity.
Reported-by: Coverity (CID 1452774)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210503095418.31521-1-mreitz@redhat.com>
[mreitz: s/close/detach/]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
req->receiving is a flag of request being in one concrete yield point
in nbd_co_do_receive_one_chunk().
Such kind of boolean flag is always better to unset before scheduling
the coroutine, to avoid double scheduling. So, let's be more careful.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-33-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We already have two similar helpers for other state. Let's add another
one for convenience.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-32-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The only last step we need to reuse the function is coroutine-wrapper.
nbd_open() may be called from non-coroutine context. So, generate the
wrapper and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-31-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We'll need a possibility of non-blocking nbd_co_establish_connection(),
so that it returns immediately, and it returns success only if a
connections was previously established in background.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-30-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Split out the part that we want to reuse for nbd_open().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610100802.5888-29-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
block/nbd doesn't need underlying sioc channel anymore. So, we can
update nbd/client-connection interface to return only one top-most io
channel, which is more straight forward.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-27-vsementsov@virtuozzo.com>
[eblake: squash in Vladimir's fixes for uninit usage caught by clang]
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently sioc pointer is used just to pass from socket-connection to
nbd negotiation. Drop the field, and use local variables instead. With
next commit we'll update nbd/client-connection.c to behave
appropriately (return only top-most ioc, not two channels).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-26-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Negotiation during reconnect is now done in a thread, and s->sioc is
not available during negotiation. Negotiation in thread will be
cancelled by nbd_client_connection_release() called from
nbd_clear_bdrvstate(). So, we don't need this code chunk anymore.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-25-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we can opt in to negotiation as part of the client connection
thread, use that to simplify connection_co. This is another step on
the way to moving all reconnect code into NBDClientConnection.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-24-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To be reused in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-23-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add arguments and logic to support nbd negotiation in the same thread
after successful connection.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610100802.5888-20-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We now have bs-independent connection API, which consists of four
functions:
nbd_client_connection_new()
nbd_client_connection_release()
nbd_co_establish_connection()
nbd_co_establish_connection_cancel()
Move them to a separate file together with NBDClientConnection
structure which becomes private to the new API.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-18-vsementsov@virtuozzo.com>
[eblake: comment tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a last step of creating bs-independent nbd connection
interface. With next commit we can finally move it to separate file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610100802.5888-17-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a step of creating bs-independent nbd connection interface.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-16-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to move the connection code to its own file, and want
clear names and APIs first.
The structure is shared between user and (possibly) several runs of
connect-thread. So it's wrong to call it "thread". Let's rename to
something more generic.
Appropriately rename connect_thread and thr variables to conn.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-15-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
nbd_co_establish_connection_cancel() actually needs only pointer to
NBDConnectThread. So, make it clean.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-14-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to split connection code to a separate file. Now we are
ready to give nbd_co_establish_connection() clean and bs-independent
interface.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-13-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We don't need all these states. The code refactored to use two boolean
variables looks simpler.
While moving the comment in nbd_co_establish_connection() rework it to
give better information. Also, we are going to move the connection code
to separate file and mentioning drained section would be confusing.
Improve also the comment in NBDConnectThread, while dropping removed
state names from it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610100802.5888-12-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: comment tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of managing connect_bh, bh_ctx, and wait_connect fields, we
can use a single link to the waiting coroutine with proper mutex
protection.
So new logic is:
nbd_co_establish_connection() sets wait_co under the mutex, releases
the mutex, then yield()s. Note that wait_co may be scheduled by the
thread immediately after unlocking the mutex. Still, the main thread
(or iothread) will not reach the code for entering the coroutine until
the yield(), so we are safe.
connect_thread_func() and nbd_co_establish_connection_cancel() do
the following to handle wait_co:
Under the mutex, if thr->wait_co is not NULL, make it NULL and
schedule it. This way, we avoid scheduling the coroutine twice.
Still scheduling is a bit different:
In connect_thread_func() we can just call aio_co_wake under mutex,
after commit
[async: the main AioContext is only "current" if under the BQL]
we are sure that aio_co_wake() will not try to acquire the aio context
and do qemu_aio_coroutine_enter() but simply schedule the coroutine by
aio_co_schedule().
nbd_co_establish_connection_cancel() will be called from non-coroutine
context in further patch and will be able to go through
qemu_aio_coroutine_enter() path of aio_co_wake(). So keep current
behavior of waking the coroutine after the critical section.
Also, this commit reduces the dependence of
nbd_co_establish_connection() on the internals of bs (we now use a
generic pointer to the coroutine, instead of direct use of
s->connection_co). This is a step towards splitting the connection
API out of nbd.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610100802.5888-11-vsementsov@virtuozzo.com>
Reviewied-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These fields are write-only. Drop them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20210610100802.5888-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Simplify lifetime management of BDRVNBDState->connect_thread by
delaying the possible cleanup of it until the BDRVNBDState itself goes
away.
This also reverts
0267101af6 "block/nbd: fix possible use after free of s->connect_thread"
as now s->connect_thread can't be cleared until the very end.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
[vsementsov: rebase, revert 0267101af6 changes]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak comment]
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-8-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Detecting monitor by current coroutine works bad when we are not in
coroutine context. And that's exactly so in nbd reconnect code, where
qio_channel_socket_connect_sync() is called from thread.
Monitor is needed only to parse named file descriptor. So, let's just
parse it during nbd_open(), so that all further users of s->saddr don't
need to access monitor.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610100802.5888-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
nbd_open() does it (through nbd_establish_connection()).
Actually we lost that call on reconnect path in 1dc4718d84
"block/nbd: use non-blocking connect: fix vm hang on connect()"
when we have introduced reconnect thread.
Fixes: 1dc4718d84
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610100802.5888-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We have two "return error" paths in nbd_open() after
nbd_process_options(). Actually we should call nbd_clear_bdrvstate()
on these paths. Interesting that nbd_process_options() calls
nbd_clear_bdrvstate() by itself.
Let's fix leaks and refactor things to be more obvious:
- intialize yank at top of nbd_open()
- move yank cleanup to nbd_clear_bdrvstate()
- refactor nbd_open() so that all failure paths except for
yank-register goes through nbd_clear_bdrvstate()
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
nbd_free_connect_thread leaks the channel object if it hasn't been
stolen.
Unref it and fix the leak.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210610100802.5888-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A flush failure is a critical failure scenario for some operations.
For example, it will prevent migration from completing, as it will
make vm_stop() report an error. Thus it is important to have a
trace point present for debugging.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When fdatasync() fails on a file backend we set a flag that
short-circuits any future attempts to call fdatasync(). The
first failure returns the true errno, but the later short-
circuited calls return a generic EIO. The latter is unhelpful
because fdatasync() can return a variety of errnos, including
EACCESS.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Depending on the configuration of QEMU, some binaries might not need libm
at all. In that case libiscsi, which uses exp(), will fail to load.
Link it in the module explicitly.
Reported-by: Yi Sun <yisun@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now all dependencies for block modules are passed to
module_ss.add(when: ...), so they are mandatory. In the next patch we
will need to add a libm dependency to a module, but libm does not exist
on all systems. So, modify the creation of module_ss and modsrc so that
dependencies can also be passed to module_ss.add(if_true: ...).
While touching the array, remove the useless dependency of the curl
module on glib. glib is always linked in QEMU and in fact all other
block modules also need it, but they don't have to specify it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver
-----BEGIN PGP SIGNATURE-----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=gSq/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver
# gpg: Signature made Wed 02 Jun 2021 14:44:15 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
docs/secure-coding-practices: Describe how to use 'null-co' block driver
block-copy: refactor copy_range handling
block-copy: fix block_copy_task_entry() progress update
nbd/server: Use drained block ops to quiesce the server
block-backend: add drained_poll
block: improve permission conflict error message
block: simplify bdrv_child_user_desc()
block/vvfat: inherit child_vvfat_qcow from child_of_bds
block: improve bdrv_child_get_parent_desc()
block-backend: improve blk_root_get_parent_desc()
block: document child argument of bdrv_attach_child_common()
block/file-posix: Try other fallbacks after invalid FALLOC_FL_ZERO_RANGE
block/file-posix: Fix problem with fallocate(PUNCH_HOLE) on GPFS
block: drop BlockBackendRootState::read_only
block: drop BlockDriverState::read_only
block: consistently use bdrv_is_read_only()
block/vvfat: fix vvfat_child_perm crash
block/vvfat: child_vvfat_qcow: add .get_parent_aio_context, fix crash
qemu-io-cmds: assert that we don't have .perm requested in no-blk case
block/quorum: Provide .bdrv_co_flush instead of .bdrv_co_flush_to_disk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we update s->use_copy_range and s->copy_size in
block_copy_do_copy().
It's not very good:
1. block_copy_do_copy() is intended to be a simple function, that wraps
bdrv_co_<io> functions for need of block copy. That's why we don't pass
BlockCopyTask into it. So, block_copy_do_copy() is bad place for
manipulation with generic state of block-copy process
2. We are going to make block-copy thread-safe. So, it's good to move
manipulation with state of block-copy to the places where we'll need
critical sections anyway, to not introduce extra synchronization
primitives in block_copy_do_copy().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210528141628.44287-3-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't report successful progress on failure, when call_state->ret is
set.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210528141628.44287-2-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow block backends to poll their devices/users to check if they have
been quiesced when entering a drained section.
This will be used in the next patch to wait for the NBD server to be
completely quiesced.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20210602060552.17433-2-slp@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recently we've fixed a crash by adding .get_parent_aio_context handler
to child_vvfat_qcow. Now we want it to support .get_parent_desc as
well. child_vvfat_qcow wants to implement own .inherit_options, it's
not bad. But omitting all other handlers is a bad idea. Let's inherit
the class from child_of_bds instead, similar to chain_child_class and
detach_by_driver_cb_class in test-bdrv-drain.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210601075218.79249-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have different types of parents: block nodes, block backends and
jobs. So, it makes sense to specify type together with name.
While being here also use g_autofree.
iotest 307 output is updated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210601075218.79249-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If fallocate(... FALLOC_FL_ZERO_RANGE ...) returns EINVAL, it's likely
an indication that the file system is buggy and does not implement
unaligned accesses right. We still might be lucky with the other
fallback fallocate() calls later in this function, though, so we should
not return immediately and try the others first.
Since FALLOC_FL_ZERO_RANGE could also return EINVAL if the file descriptor
is not a regular file, we ignore this filesystem bug silently, without
printing an error message for the user.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-3-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A customer reported that running
qemu-img convert -t none -O qcow2 -f qcow2 input.qcow2 output.qcow2
fails for them with the following error message when the images are
stored on a GPFS file system :
qemu-img: error while writing sector 0: Invalid argument
After analyzing the strace output, it seems like the problem is in
handle_aiocb_write_zeroes(): The call to fallocate(FALLOC_FL_PUNCH_HOLE)
returns EINVAL, which can apparently happen if the file system has
a different idea of the granularity of the operation. It's arguably
a bug in GPFS, since the PUNCH_HOLE mode should not result in EINVAL
according to the man-page of fallocate(), but the file system is out
there in production and so we have to deal with it. In commit 294682cc3a
("block: workaround for unaligned byte range in fallocate()") we also
already applied the a work-around for the same problem to the earlier
fallocate(FALLOC_FL_ZERO_RANGE) call, so do it now similar with the
PUNCH_HOLE call. But instead of silently catching and returning
-ENOTSUP (which causes the caller to fall back to writing zeroes),
let's rather inform the user once about the buggy file system and
try the other fallback instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-2-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of keeping additional boolean field, let's store the
information in BDRV_O_RDWR bit of BlockBackendRootState::open_flags.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's better to use accessor function instead of bs->read_only directly.
In some places use bdrv_is_writable() instead of
checking both BDRV_O_RDWR set and BDRV_O_INACTIVE not set.
In bdrv_open_common() it's a bit strange to add one more variable, but
we are going to drop bs->read_only in the next patch, so new ro local
variable substitutes it here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's wrong to rely on s->qcow in vvfat_child_perm, as on permission
update during bdrv_open_child() call this field is not set yet.
Still prior to aa5a04c7db, it didn't
crash, as bdrv_open_child passed NULL as child to bdrv_child_perm(),
and NULL was equal to NULL in assertion (still, it was bad guarantee
for child being s->qcow, not backing :).
Since aa5a04c7db
"add bdrv_attach_child_noperm" bdrv_refresh_perms called on parent node
when attaching child, and new correct child pointer is passed to
.bdrv_child_perm. Still, s->qcow is NULL at the moment. Let's rely only
on role instead.
Without that fix,
./build/qemu-system-x86_64 -usb -device usb-storage,drive=fat16 \
-drive \
file=fat:rw:fat-type=16:"<path of a host folder>",id=fat16,format=raw,if=none
crashes:
(gdb) bt
0 raise () at /lib64/libc.so.6
1 abort () at /lib64/libc.so.6
2 _nl_load_domain.cold () at /lib64/libc.so.6
3 annobin_assert.c_end () at /lib64/libc.so.6
4 vvfat_child_perm (bs=0x559186f3d690, c=0x559186f1ed20, role=3,
reopen_queue=0x0, perm=0, shared=31,
nperm=0x7ffe56f28298, nshared=0x7ffe56f282a0) at
../block/vvfat.c:3214
5 bdrv_child_perm (bs=0x559186f3d690, child_bs=0x559186f60190,
c=0x559186f1ed20, role=3, reopen_queue=0x0,
parent_perm=0, parent_shared=31,
nperm=0x7ffe56f28298, nshared=0x7ffe56f282a0)
at ../block.c:2094
6 bdrv_node_refresh_perm (bs=0x559186f3d690, q=0x0,
tran=0x559186f65850, errp=0x7ffe56f28530) at
../block.c:2336
7 bdrv_list_refresh_perms (list=0x559186db5b90 = {...}, q=0x0,
tran=0x559186f65850, errp=0x7ffe56f28530)
at ../block.c:2358
8 bdrv_refresh_perms (bs=0x559186f3d690, errp=0x7ffe56f28530) at
../block.c:2419
9 bdrv_attach_child
(parent_bs=0x559186f3d690, child_bs=0x559186f60190,
child_name=0x559184d83e3d "write-target",
child_class=0x5591852f3b00 <child_vvfat_qcow>, child_role=3,
errp=0x7ffe56f28530) at ../block.c:2959
10 bdrv_open_child
(filename=0x559186f5cb80 "/var/tmp/vl.7WYmFU",
options=0x559186f66c20, bdref_key=0x559184d83e3d "write-target",
parent=0x559186f3d690, child_class=0x5591852f3b00
<child_vvfat_qcow>, child_role=3, allow_none=false,
errp=0x7ffe56f28530) at ../block.c:3351
11 enable_write_target (bs=0x559186f3d690, errp=0x7ffe56f28530) at
../block/vvfat.c:3177
12 vvfat_open (bs=0x559186f3d690, options=0x559186f42db0, flags=155650,
errp=0x7ffe56f28530) at ../block/vvfat.c:1236
13 bdrv_open_driver (bs=0x559186f3d690, drv=0x5591853d97e0
<bdrv_vvfat>, node_name=0x0,
options=0x559186f42db0, open_flags=155650,
errp=0x7ffe56f28640) at ../block.c:1557
14 bdrv_open_common (bs=0x559186f3d690, file=0x0,
options=0x559186f42db0, errp=0x7ffe56f28640) at
../block.c:1833
...
(gdb) fr 4
#4 vvfat_child_perm (bs=0x559186f3d690, c=0x559186f1ed20, role=3,
reopen_queue=0x0, perm=0, shared=31,
nperm=0x7ffe56f28298, nshared=0x7ffe56f282a0) at
../block/vvfat.c:3214
3214 assert(c == s->qcow || (role & BDRV_CHILD_COW));
(gdb) p role
$1 = 3 # BDRV_CHILD_DATA | BDRV_CHILD_METADATA
(gdb) p *c
$2 = {bs = 0x559186f60190, name = 0x559186f669d0 "write-target", klass
= 0x5591852f3b00 <child_vvfat_qcow>, role = 3, opaque =
0x559186f3d690, perm = 3, shared_perm = 4, frozen = false,
parent_quiesce_counter = 0, next = {le_next = 0x0, le_prev =
0x559186f41818}, next_parent = {le_next = 0x0, le_prev =
0x559186f64320}}
(gdb) p s->qcow
$3 = (BdrvChild *) 0x0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210524101257.119377-3-vsementsov@virtuozzo.com>
Tested-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The quorum block driver uses a custom flush callback to handle the
case when some children return io errors. In that case it still
returns success if enough children are healthy.
However, it provides it as the .bdrv_co_flush_to_disk callback, not
as .bdrv_co_flush. This causes the block layer to do it's own
generic flushing for the children instead, which doesn't handle
errors properly.
Fix this by providing .bdrv_co_flush instead of
.bdrv_co_flush_to_disk so the block layer uses the custom flush
callback.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reported-by: Minghao Yuan <meeho@qq.com>
Message-Id: <20210518134214.11ccf05f@gecko.fritz.box>
Tested-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. So from the RHEL-7 perspective, we do not have to support
libssh v0.7 anymore now.
Let's look at the versions from other distributions and operating
systems - according to repology.org, current shipping versions are:
RHEL-8: 0.9.4
Debian Buster: 0.8.7
openSUSE Leap 15.2: 0.8.7
Ubuntu LTS 18.04: 0.8.0 *
Ubuntu LTS 20.04: 0.9.3
FreeBSD: 0.9.5
Fedora 33: 0.9.5
Fedora 34: 0.9.5
OpenBSD: 0.9.5
macOS HomeBrew: 0.9.5
HaikuPorts: 0.9.5
* The version of libssh in Ubuntu 18.04 claims to be 0.8.0 from the
name of the package, but in reality it is a 0.7 patched up as a
Frankenstein monster with patches from the 0.8 development branch.
This gave us some headaches in the past already and so it never worked
with QEMU. All attempts to get it supported have failed in the past,
patches for QEMU have never been merged and a request to Ubuntu to
fix it in their 18.04 distro has been ignored:
https://bugs.launchpad.net/ubuntu/+source/libssh/+bug/1847514
Thus we really should ignore the libssh in Ubuntu 18.04 in QEMU, too.
Fix it by bumping the minimum libssh version to something that is
greater than 0.8.0 now. Debian Buster and openSUSE Leap have the
oldest version and so 0.8.7 is the new minimum.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20210519155859.344569-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The replication.h file is included from migration/colo.c and tests/unit/test-replication.c,
so it should be in include/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, users of qemu_co_sleep_ns_wakeable are simply passing
a pointer to QemuCoSleepState by reference to the function. But
QemuCoSleepState really is just a Coroutine*; making the
content of the struct public is just as efficient and lets us
skip the user_state_pointer indirection.
Since the usage is changed, take the occasion to rename the
struct to QemuCoSleep.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210517100548.28806-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers of qemu_co_sleep_wake are checking whether they are passing
a NULL argument inside the pointer-to-pointer: do the check in
qemu_co_sleep_wake itself.
As a side effect, qemu_co_sleep_wake can be called more than once and
it will only wake the coroutine once; after the first time, the argument
will be set to NULL via *sleep_state->user_state_pointer. However, this
would not be safe unless co_sleep_cb keeps using the QemuCoSleepState*
directly, so make it go through the pointer-to-pointer instead.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210517100548.28806-4-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The checks in vu_blk_sect_range_ok() assume VIRTIO_BLK_SECTOR_SIZE is
equal to BDRV_SECTOR_SIZE. This is true, but let's add a
QEMU_BUILD_BUG_ON() to make it explicit.
We might as well check that the request buffer size is a multiple of
VIRTIO_BLK_SECTOR_SIZE while we're at it.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210331142727.391465-1-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set bdi->is_dirty, so that qemu-img info could show dirty flag.
After this commit the following check will show '"dirty-flag": true':
./build/qemu-img create -f qcow2 -o lazy_refcounts=on x 1M
./build/qemu-io x
qemu-io> write 0 1M
After "write" command success, kill the qemu-io process:
kill -9 <qemu-io pid>
./build/qemu-img info --output=json x
This will show '"dirty-flag": true' among other things. (before this
commit it shows '"dirty-flag": false')
Note, that qcow2's dirty-bit is not a "dirty bit for the image". It
only protects qcow2 lazy refcounts feature. So, there are a lot of
conditions when qcow2 session may be not closed correctly, but bit is
0. Still, when bit is set, the last session is definitely not finished
correctly and it's better to report it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210504160656.462836-1-vsementsov@virtuozzo.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"qemu/typedefs.h" is enough for include/block/write-threshold.h header
with forward declaration of BlockDriverState. Also drop extra includes
from block/write-threshold.c and tests/unit/test-write-threshold.c
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210506090621.11848-9-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_write_threshold_exceeded() is unused.
bdrv_write_threshold_is_set() is used only to double check the value of
bs->write_threshold_offset in tests. No real sense in it (both tests do
check real value with help of bdrv_write_threshold_get())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted commit message as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
They are unused now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-3-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
write-notifiers are used only for write-threshold. New code for such
purpose should create filters.
Let's better special-case write-threshold and drop write notifiers at
all. (Actually, write-threshold is special-cased anyway, as the only
user of write-notifiers)
So, create a new direct interface for bdrv_co_write_req_prepare() and
drop all write-notifier related logic from write-threshold.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted comment as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now, after huge update of block graph permission update algorithm, we
don't need this workaround with active state of the filter. Drop it and
use new smart bdrv_drop_filter() function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210506194143.394141-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If mirror is READY than cancel operation is not discarding the whole
result of the operation, but instead it's a documented way get a
point-in-time snapshot of source disk.
So, we should not cancel any requests if mirror is READ and
force=false. Let's fix that case.
Note, that bug that we have before this commit is not critical, as the
only .bdrv_cancel_in_flight implementation is nbd_cancel_in_flight()
and it cancels only requests waiting for reconnection, so it should be
rare case.
Fixes: 521ff8b779
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210421075858.40197-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max reported the following bug:
$ ./qemu-img create -f raw src.img 1G
$ ./qemu-img create -f raw dst.img 1G
$ (echo '
{"execute":"qmp_capabilities"}
{"execute":"blockdev-mirror",
"arguments":{"job-id":"mirror",
"device":"source",
"target":"target",
"sync":"full",
"filter-node-name":"mirror-top"}}
'; sleep 3; echo '
{"execute":"human-monitor-command",
"arguments":{"command-line":
"qemu-io mirror-top \"write 0 1G\""}}') \
| x86_64-softmmu/qemu-system-x86_64 \
-qmp stdio \
-blockdev file,node-name=source,filename=src.img \
-blockdev file,node-name=target,filename=dst.img \
-object iothread,id=iothr0 \
-device virtio-blk,drive=source,iothread=iothr0
crashes:
0 raise () at /usr/lib/libc.so.6
1 abort () at /usr/lib/libc.so.6
2 error_exit
(err=<optimized out>,
msg=msg@entry=0x55fbb1634790 <__func__.27> "qemu_mutex_unlock_impl")
at ../util/qemu-thread-posix.c:37
3 qemu_mutex_unlock_impl
(mutex=mutex@entry=0x55fbb25ab6e0,
file=file@entry=0x55fbb1636957 "../util/async.c",
line=line@entry=650)
at ../util/qemu-thread-posix.c:109
4 aio_context_release (ctx=ctx@entry=0x55fbb25ab680) at ../util/async.c:650
5 bdrv_do_drained_begin
(bs=bs@entry=0x55fbb3a87000, recursive=recursive@entry=false,
parent=parent@entry=0x0,
ignore_bds_parents=ignore_bds_parents@entry=false,
poll=poll@entry=true) at ../block/io.c:441
6 bdrv_do_drained_begin
(poll=true, ignore_bds_parents=false, parent=0x0, recursive=false,
bs=0x55fbb3a87000) at ../block/io.c:448
7 blk_drain (blk=0x55fbb26c5a00) at ../block/block-backend.c:1718
8 blk_unref (blk=0x55fbb26c5a00) at ../block/block-backend.c:498
9 blk_unref (blk=0x55fbb26c5a00) at ../block/block-backend.c:491
10 hmp_qemu_io (mon=0x7fffaf3fc7d0, qdict=<optimized out>)
at ../block/monitor/block-hmp-cmds.c:628
man pthread_mutex_unlock
...
EPERM The mutex type is PTHREAD_MUTEX_ERRORCHECK or
PTHREAD_MUTEX_RECURSIVE, or the mutex is a robust mutex, and the
current thread does not own the mutex.
So, thread doesn't own the mutex. And we have iothread here.
Next, note that AIO_WAIT_WHILE() documents that ctx must be acquired
exactly once by caller. But where is it acquired in the call stack?
Seems nowhere.
qemuio_command do acquire aio context.. But we need context acquired
around blk_unref() as well and actually around blk_insert_bs() too.
Let's refactor qemuio_command so that it doesn't acquire aio context
but callers do that instead. This way we can cleanly acquire aio
context in hmp_qemu_io() around all three calls.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210423134233.51495-1-vsementsov@virtuozzo.com>
[mreitz: Fixed comment]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes the parser needs to further split a token it has collected
from the token input stream. Right now, it does a cursory check to see
if the relevant characters appear in the token to determine if it should
break it down further.
However, qemu_rbd_next_tok() will escape characters as it removes tokens
from the token stream and plain strchr() won't. This can make the
initial strchr() check slightly misleading since it implies
qemu_rbd_next_tok() will find the token and split on it, except the
reality is that qemu_rbd_next_tok() will pass over it if it is escaped.
Use a custom strchr to avoid mixing escaped and unescaped string
operations. Furthermore, this code is identical to how
qemu_rbd_next_tok() seeks its next token, so incorporate this custom
strchr into the body of that function to reduce duplication.
Reported-by: Han Han <hhan@redhat.com>
Fixes: https://bugzilla.redhat.com/1873913
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210421212343.85524-3-ckuehl@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Right now, rate limiting is protected by the AioContext mutex, which is
taken for example both by the block jobs and by qmp_block_job_set_speed
(via find_block_job).
We would like to remove the dependency of block layer code on the
AioContext mutex, since most drivers and the core I/O code are already
not relying on it. However, there is no existing lock that can easily
be taken by both ratelimit_set_speed and ratelimit_calculate_delay,
especially because the latter might run in coroutine context (and
therefore under a CoMutex) but the former will not.
Since concurrent calls to ratelimit_calculate_delay are not possible,
one idea could be to use a seqlock to get a snapshot of slice_ns and
slice_quota. But for now keep it simple, and just add a mutex to the
RateLimit struct; block jobs are generally not performance critical to
the point of optimizing the clock cycles spent in synchronization.
This also requires the introduction of init/destroy functions, so
add them to the two users of ratelimit.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Normally, blk_new_open() just shares all permissions. This was fine
originally when permissions only protected against uses in the same
process because no other part of the code would actually get to access
the block nodes opened with blk_new_open(). However, since we use it for
file locking now, unsharing permissions becomes desirable.
Add a new BDRV_O_NO_SHARE flag that is used in blk_new_open() to unshare
any permissions that can be unshared.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210422164344.283389-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move bdrv_reopen_multiple to new paradigm of permission update:
first update graph relations, then do refresh the permissions.
We have to modify reopen process in file-posix driver: with new scheme
we don't have prepared permissions in raw_reopen_prepare(), so we
should reconfigure fd in raw_check_perm(). Still this seems more native
and simple anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-31-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To be used in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-28-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need this workaround anymore: bdrv_append is already smart
enough and we can use new bdrv_drop_filter().
This commit efficiently reverts also recent 705dde27c6, which
checked .active on io path. Still it said that the problem should be
theoretical. And the logic of filter removement is changed anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-25-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Passing parent aio context is redundant, as child_class and parent
opaque pointer are enough to retrieve it. Drop the argument and use new
bdrv_child_get_parent_aio_context() interface.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new handler to get aio context and implement it in all child
classes. Add corresponding public interface to be used soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much comments for this feature. It seems better just don't
do it. Most of real users (tests don't count) have to create additional
reference.
Drop also comment in external_snapshot_prepare:
- bdrv_append doesn't "remove" old bs in common sense, it sounds
strange
- the fact that bdrv_append can fail is obvious from the context
- the fact that we must rollback all changes in transaction abort is
known (it's the direct role of abort)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If on nbd_close() we detach the thread (in
nbd_co_establish_connection_cancel() thr->state becomes
CONNECT_THREAD_RUNNING_DETACHED), after that point we should not use
s->connect_thread (which is set to NULL), as running thread may free it
at any time.
Still nbd_co_establish_connection() does exactly this: it saves
s->connect_thread to local variable (just for better code style) and
use it even after yield point, when thread may be already detached.
Fix that. Also check thr to be non-NULL on
nbd_co_establish_connection() start for safety.
After this patch "case CONNECT_THREAD_RUNNING_DETACHED" becomes
impossible in the second switch in nbd_co_establish_connection().
Still, don't add extra abort() just before the release. If it somehow
possible to reach this "case:" it won't hurt. Anyway, good refactoring
of all this reconnect mess will come soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210406155114.1057355-1-vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, it is impossible to complete jobs on standby (i.e. paused
ready jobs), but actually the only thing in mirror_complete() that does
not work quite well with a paused job is the job_enter() at the end.
If we make it conditional, this function works just fine even if the
mirror job is paused.
So technically this is a no-op, but obviously the intention is to accept
block-job-complete even for jobs on standby, which we need this patch
for first.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210409120422.144040-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a graph change and therefore should be done in job-finalize
(which is what invokes mirror_exit_common()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210409120422.144040-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When we allocate 'q_namespace', we forgot to set 'has_q_namespace'
to true. This can cause several issues, including a memory leak,
since qapi_free_BlockdevCreateOptions() does not deallocate that
memory, as reported by valgrind:
13 bytes in 1 blocks are definitely lost in loss record 7 of 96
at 0x4839809: malloc (vg_replace_malloc.c:307)
by 0x48CEBB8: g_malloc (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x48E3FE3: g_strdup (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x180010: qemu_rbd_co_create_opts (rbd.c:446)
by 0x1AE72C: bdrv_create_co_entry (block.c:492)
by 0x241902: coroutine_trampoline (coroutine-ucontext.c:173)
by 0x57530AF: ??? (in /usr/lib64/libc-2.32.so)
by 0x1FFEFFFA6F: ???
Fix setting 'has_q_namespace' to true when we allocate 'q_namespace'.
Fixes: 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210329150129.121182-3-sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qemu_rbd_connect(), 'mon_host' is allocated by qemu_rbd_mon_host()
using g_strjoinv(), but it's only freed in the error path, leaking
memory in the success path as reported by valgrind:
80 bytes in 4 blocks are definitely lost in loss record 5,028 of 6,516
at 0x4839809: malloc (vg_replace_malloc.c:307)
by 0x5315BB8: g_malloc (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x532B6FF: g_strjoinv (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x87D07E: qemu_rbd_mon_host (rbd.c:538)
by 0x87D07E: qemu_rbd_connect (rbd.c:562)
by 0x87E1CE: qemu_rbd_open (rbd.c:740)
by 0x840EB1: bdrv_open_driver (block.c:1528)
by 0x8453A9: bdrv_open_common (block.c:1802)
by 0x8453A9: bdrv_open_inherit (block.c:3444)
by 0x8464C2: bdrv_open (block.c:3537)
by 0x8108CD: qmp_blockdev_add (blockdev.c:3569)
by 0x8EA61B: qmp_marshal_blockdev_add (qapi-commands-block-core.c:1086)
by 0x90B528: do_qmp_dispatch_bh (qmp-dispatch.c:131)
by 0x907EA4: aio_bh_poll (async.c:164)
Fix freeing 'mon_host' also when qemu_rbd_connect() ends correctly.
Fixes: 0a55679b4a
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210329150129.121182-2-sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Given that the block size is read from the header of the VDI file, a
wide variety of sizes might be seen. Rather than re-using a block
sized memory region when writing the VDI header, allocate an
appropriately sized buffer.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20210325112941.365238-3-pbonzini@redhat.com
Message-Id: <20210309144015.557477-3-david.edmondson@oracle.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a new bitmap entry is allocated, requiring the entire block to be
written, avoiding leaking the buffer allocated for the block should
the write fail.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20210325112941.365238-2-pbonzini@redhat.com
Message-Id: <20210309144015.557477-2-david.edmondson@oracle.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Setting the qcow2 data-file-raw bit means that you can ignore the
qcow2 metadata when reading from the external data file. It does not
mean that you have to ignore it, though. Therefore, the data read must
be the same regardless of whether you interpret the metadata or whether
you ignore it, and thus the L1/L2 tables must all be present and give a
1:1 mapping.
This patch changes 244's output: First, the qcow2 file is larger right
after creation, because of metadata preallocation. Second, the qemu-img
map output changes: Everything that was not explicitly discarded or
zeroed is now a data area.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326145509.163455-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
mirror_top currently shares all permissions, and takes only the WRITE
permission (if some parent has taken that permission, too).
That is wrong, though; mirror_top is a filter, so it should take
permissions like any other filter does. For example, if the parent
needs CONSISTENT_READ, we need to take that, too, and if it cannot share
the WRITE permission, we cannot share it either.
The exception is when mirror_top is used for active commit, where we
cannot take CONSISTENT_READ (because it is deliberately unshared above
the base node) and where we must share WRITE (so that it is shared for
all images in the backing chain, so the mirror job can take it for the
target BB).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210211172242.146671-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Regular virtual timers are used to emulate timings
related to vCPU and peripheral states. QCOW2 uses timers
to clean the cache. These timers should have external
flag. In the opposite case they affect the execution
and it can't be recorded and replayed.
This patch adds external flag to the timer for qcow2
cache clean.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <161700516327.1141158.8366564693714562536.stgit@pasha-ThinkPad-X280>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Command block_passwd always fails since
Commit c01c214b69 "block: remove all encryption handling APIs"
(v2.10.0) turned block_passwd into a stub that always fails, and
hardcoded encryption_key_missing to false in query-named-block-nodes
and query-block.
Commit ad1324e044 "block: remove 'encryption_key_missing' flag from
QAPI" just landed. Complete the cleanup job: remove block_passwd.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323101951.3686029-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The vhost-user in-flight shmfd feature has not been tested with
qemu-storage-daemon's vhost-user-blk server. Disable this optional
feature for now because it requires MFD_ALLOW_SEALING, which is not
available in some CI environments.
If we need this feature in the future it can be re-enabled after
testing.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a curl transfer is finished, that does not mean that CURL lets go
of all the sockets it used for it. We therefore must not free a
CURLSocket object before CURL has invoked curl_sock_cb() to tell us to
remove it. Otherwise, we may get a use-after-free, as described in this
bug report: https://bugs.launchpad.net/qemu/+bug/1916501
(Reproducer from that report:
$ qemu-img convert -f qcow2 -O raw \
https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img \
out.img
)
(Alternatively, it might seem logical to force-drop all sockets that
have been used for a state when the respective transfer is done, kind of
like it is done now, but including unsetting the AIO handlers.
Unfortunately, doing so makes the driver just hang instead of crashing,
which seems to evidence that CURL still uses those sockets.)
Make the CURLSocket object independent of "its" CURLState by putting all
sockets into a hash table belonging to the BDRVCURLState instead of a
list that belongs to a CURLState. Do not touch any sockets in
curl_clean_state().
Testing, it seems like all sockets are indeed gone by the time the curl
BDS is closed, so it seems like there really was no point in freeing any
socket just because a transfer is done. libcurl does invoke
curl_sock_cb() with CURL_POLL_REMOVE for every socket it has.
Buglink: https://bugs.launchpad.net/qemu/+bug/1916501
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210309130541.37540-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A socket does not really belong to any specific state. We do not need
to store a pointer to "its" state in it, a pointer to the common
BDRVCURLState is sufficient.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210309130541.37540-2-mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image streaming block job restricts shared permissions of the nodes
it accesses. This can obviously fail when other users already got these
permissions. &error_abort is therefore wrong and can crash. Handle these
errors gracefully and just fail starting the block job.
Reported-by: Nini Gu <ngu@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210309173451.45152-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'host_device' and 'host_cdrom' drivers must be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The same data is available in the 'BlockDeviceInfo' struct.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The same information is available via the 'recording' and 'busy' fields.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This has been hardcoded to "false" since 2.10.0, since secrets required
to unlock block devices are now always provided up front instead of using
interactive prompts.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmBHlmIACgkQp6FrSiUn
Q2q2cQgAqJWNb4J/ShjvzocDDPzJ0iBitFbg0huFPfbt4DScubEZo5wBJG7vOhOW
hIHrWCRzGvRgsn0tcSfrgFaegmHKrLgjkibM7ou8ni9NC1kUBd3R/3FBNIMxhYf7
Q8Kfspl0LRfMJDKF9jdCnQ4Gxcd6h2OIYZqiWVg8V4Tc8WdCpIVOah7e7wjuW8bT
vgZvfboUWm5AmIF9j/MxuMn+HFZ4ArSuFVL80ZaXlD00vRra7u3HZ8pUfcOlOujg
7HeouM1E5j3NNE6aZSN++x/EQ3sg0zmirbWUCcgAyRfdRkAmB15uh2PUzPxEIJKH
UHUIW5LvNtz2+yzOAz2yK29OE523Yg==
=blE1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging
nbd patches for 2021-03-09
- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer
# gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2021-03-09:
block/qcow2: refactor qcow2_update_options_prepare error paths
block/qed: bdrv_qed_do_open: deal with errp
block/qcow2: simplify qcow2_co_invalidate_cache()
block/qcow2: read_cache_sizes: return status value
block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps
block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface
block/qcow2: qcow2_get_specific_info(): drop error propagation
blockjob: return status from block_job_set_speed()
block/mirror: drop extra error propagation in commit_active_start()
block: drop extra error propagation for bdrv_set_backing_hd
blockdev: fix drive_backup_prepare() missed error
block: check return value of bdrv_open_child and drop error propagation
utils: Deprecate hex-with-suffix sizes
utils: Improve qemu_strtosz() to have 64 bits of precision
utils: Enhance testsuite for do_strtosz()
nbd: server: Report holes for raw images
MAINTAINERS: add Vladimir as co-maintainer of NBD
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Keep setting ret close to setting errp and don't merge different error
paths into one. This way it's more obvious that we don't return
error without setting errp.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-15-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Always set errp on failure. The generic bdrv_open_driver supports
driver functions which can return a negative value but forget to set
errp. That's a strange thing. Let's improve bdrv_qed_do_open to not
behave this way. This allows the simplification of code in
bdrv_qed_co_invalidate_cache().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-14-vsementsov@virtuozzo.com>
[eblake: commit message grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
qcow2_do_open correctly sets errp on each failure path. So, we can
simplify code in qcow2_co_invalidate_cache() and drop explicit error
propagation.
Add ERRP_GUARD() as mandated by the documentation in
include/qapi/error.h so that error_prepend() is actually called even if
errp is &error_fatal.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-13-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to return status together with setting errp. It allows to
reduce error propagation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-12-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to return status together with setting errp. It makes
possible to avoid error propagation.
While being here, put ERRP_GUARD() to fix error_prepend(errp, ...)
usage inside qcow2_store_persistent_dirty_bitmaps() (see the comment
above ERRP_GUARD() definition in include/qapi/error.h)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-11-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's recommended for bool functions with errp to return true on success
and false on failure. Non-standard interfaces don't help to understand
the code. The change is also needed to reduce error propagation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Don't use error propagation in qcow2_get_specific_info(). For this
refactor qcow2_get_bitmap_info_list, its current interface is rather
weird.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210202124956.63146-9-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
[eblake: separate local 'tail' variable from 'info_list' parameter]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's check return value of mirror_start_job to check for failure
instead of local_err.
Rename ret to job, as ret is usually integer variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch is generated by cocci script:
@@
symbol bdrv_open_child, errp, local_err;
expression file;
@@
file = bdrv_open_child(...,
- &local_err
+ errp
);
- if (local_err)
+ if (!file)
{
...
- error_propagate(errp, local_err);
...
}
with command
spatch --sp-file x.cocci --macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80 --use-gitgrep block
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-4-vsementsov@virtuozzo.com>
[eblake: fix qcow2_do_open() to use ERRP_GUARD, necessary as the only
caller to pass allow_none=true]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210224104707.88430-5-vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to use it in more places, calculating
"s->tracks << BDRV_SECTOR_BITS" doesn't look good.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210224104707.88430-4-vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename bytes_covered_by_bitmap_cluster() to
bdrv_dirty_bitmap_serialization_coverage() and make it public.
It is needed as we are going to share it with bitmap loading in
parallels format.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20210224104707.88430-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check that the sector number and byte count are valid.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-13-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Validate discard/write zeroes the same way we do for virtio-blk. Some of
these checks are mandated by the VIRTIO specification, others are
internal to QEMU.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-11-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The driver is supposed to honor the blk_size field but the protocol
still uses 512-byte sector numbers. It is incorrect to multiply
req->sector_num by blk_size.
VIRTIO 1.1 5.2.5 Device Initialization says:
blk_size can be read to determine the optimal sector size for the
driver to use. This does not affect the units used in the protocol
(always 512 bytes), but awareness of the correct value can affect
performance.
Fixes: 3578389bcf ("block/export: vhost-user block device backend server")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-10-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use VIRTIO_BLK_SECTOR_BITS and VIRTIO_BLK_SECTOR_SIZE when dealing with
virtio-blk sector numbers. Although the values happen to be the same as
BDRV_SECTOR_BITS and BDRV_SECTOR_SIZE, they are conceptually different.
This makes it clearer when we are dealing with virtio-blk sector units.
Use VIRTIO_BLK_SECTOR_BITS in vu_blk_initialize_config(). Later patches
will use it the new constants the virtqueue request processing code
path.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-9-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The config->blk_size field is little-endian. Use the native-endian
blk_size variable to avoid double byteswapping.
Fixes: 11f60f7eae ("block/export: make vhost-user-blk config space little-endian")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210223144653.811468-8-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the backup-top node transitions from active to inactive in
bdrv_backup_top_drop(), the BlockCopyState is freed and the filtered
child is removed, so the node effectively becomes unusable.
However, noone told its I/O functions this, so they will happily
continue accessing bs->backing and s->bcs. Prevent that by aborting
early when s->active is false.
(After the preceding patch, the node should be gone after
bdrv_backup_top_drop(), so this should largely be a theoretical problem.
But still, better to be safe than sorry, and also I think it just makes
sense to check s->active in the I/O functions.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210219153348.41861-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block job holds a reference to the backup-top node (because it is
passed as the main job BDS to block_job_create()). Therefore,
bdrv_backup_top_drop() cannot delete the backup-top node (replacing it
by its child does not affect the job parent, because that has
.stay_at_node set). That is a problem, because all of its I/O functions
assume the BlockCopyState (s->bcs) to be valid and that it has a
filtered child; but after bdrv_backup_top_drop(), neither of those
things are true.
It does not make sense to add new parents to backup-top after
backup_clean(), so we should detach it from the job before
bdrv_backup_top_drop(). Because there is no function to do that for a
single node, just detach all of the job's nodes -- the job does not do
anything past backup_clean() anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210219153348.41861-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This enables some simplification of vl.c via error_fatal, and improves
error messages. Before:
$ ./qemu-system-x86_64 -readconfig .
qemu-system-x86_64: error reading file
qemu-system-x86_64: -readconfig .: read config .: Invalid argument
$ /usr/libexec/qemu-kvm -readconfig foo
qemu-kvm: -readconfig foo: read config foo: No such file or directory
After:
$ ./qemu-system-x86_64 -readconfig .
qemu-system-x86_64: -readconfig .: Cannot read config file: Is a directory
$ ./qemu-system-x86_64 -readconfig foo
qemu-system-x86_64: -readconfig foo: Could not open 'foo': No such file or directory
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226170816.231173-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the qcow initialization fails, we should remove the file if it was
already created, to avoid leaving stale files around.
We already do this for luks raw images.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-4-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function wraps bdrv_co_delete_file for the common case of removing a file,
which was just created by format driver, on an error condition.
It hides the -ENOTSUPP error, and reports all other errors otherwise.
Use it in luks driver
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-3-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the underlying block device doesn't support the
bdrv_co_delete_file interface, an 'Error' object was leaked.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201217170904.946013-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- add 'transform' member to manipulate bitmaps across migration
- work towards better error handling during bdrv_open
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmAnDQsACgkQp6FrSiUn
Q2qc5Qf/SKVdpX4j7OnHF6sBuf/8LVWz4KazSqEU0ohazBJmafgJpH2EA5pXMXR4
frZDWeanGmhj1MjMkta/++uvEBU/TMpW2z98mZvjErteXdnRQAlII/hOCI+QZJvg
viQ5t1EyrkyXzUePOjs+AwqA5KHWbCKt6QqyItQ78HvI23sw/fuvHj0G67KbVzXZ
VcSrVr0J7PXnZV/hWfg+C+Nn9Ro9tsVdn79awLYVQ7/SDro3hzylpcHMQaHMK2oe
mX4D2kNq7s21E27Zb6vlknUhQPkMdETk0gfEbpn7sTVMEc58GRLC7Tqfx7l0JIFK
5izVyA5vndKVxDGYPkbDK6VL2uDg4A==
=+Epy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2021-02-12' into staging
bitmaps patches for 2021-02-12
- add 'transform' member to manipulate bitmaps across migration
- work towards better error handling during bdrv_open
# gpg: Signature made Fri 12 Feb 2021 23:19:39 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-bitmaps-2021-02-12:
block: use return status of bdrv_append()
block: return status from bdrv_append and friends
qemu-iotests: 300: Add test case for modifying persistence of bitmap
migration: dirty-bitmap: Allow control of bitmap persistence
migration: dirty-bitmap: Use struct for alias map inner members
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now bdrv_append returns status and we can drop all the local_err things
around it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Cancel in-flight io on target to not waste the time.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Cancel in-flight io on target to not waste the time.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to cancel in-flight requests on mirror nbd target on job
cancel. Still nbd is often used not directly but as raw-format child.
So, add pass-through handler here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Just stop waiting for connection in existing requests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It will be used to stop retrying NBD requests on mirror cancel.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently bdrv_all_find_snapshot() will return 0 if it finds
a snapshot, -1 if an error occurs, or if it fails to find a
snapshot. New callers to be added want to distinguish between
the error scenario and failing to find a snapshot.
Rename it to bdrv_all_has_snapshot and make it return -1 on
error, 0 if no snapshot is found and 1 if snapshot is found.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the vmstate will be stored in the first block device that
supports snapshots. Historically this would have usually been the
root device, but with UEFI it might be the variable store. There
needs to be a way to override the choice of block device to store
the state in.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.
Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When an NBD block driver state is moved from one aio_context to another
(e.g. when doing a drain in a migration thread),
nbd_client_attach_aio_context_bh is executed that enters the connection
coroutine.
However, the assumption that ->connection_co is always present here
appears incorrect: the connection may have encountered an error other
than -EIO in the underlying transport, and thus may have decided to quit
rather than keep trying to reconnect, and therefore it may have
terminated the connection coroutine. As a result an attempt to reassign
the client in this state (NBD_CLIENT_QUIT) to a different aio_context
leads to a null pointer dereference:
#0 qio_channel_detach_aio_context (ioc=0x0)
at /build/qemu-gYtjVn/qemu-5.0.1/io/channel.c:452
#1 0x0000562a242824b3 in bdrv_detach_aio_context (bs=0x562a268d6a00)
at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6151
#2 bdrv_set_aio_context_ignore (bs=bs@entry=0x562a268d6a00,
new_context=new_context@entry=0x562a260c9580,
ignore=ignore@entry=0x7feeadc9b780)
at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6230
#3 0x0000562a24282969 in bdrv_child_try_set_aio_context
(bs=bs@entry=0x562a268d6a00, ctx=0x562a260c9580,
ignore_child=<optimized out>, errp=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6332
#4 0x0000562a242bb7db in blk_do_set_aio_context (blk=0x562a2735d0d0,
new_context=0x562a260c9580,
update_root_node=update_root_node@entry=true, errp=errp@entry=0x0)
at /build/qemu-gYtjVn/qemu-5.0.1/block/block-backend.c:1989
#5 0x0000562a242be0bd in blk_set_aio_context (blk=<optimized out>,
new_context=<optimized out>, errp=errp@entry=0x0)
at /build/qemu-gYtjVn/qemu-5.0.1/block/block-backend.c:2010
#6 0x0000562a23fbd953 in virtio_blk_data_plane_stop (vdev=<optimized
out>)
at /build/qemu-gYtjVn/qemu-5.0.1/hw/block/dataplane/virtio-blk.c:292
#7 0x0000562a241fc7bf in virtio_bus_stop_ioeventfd (bus=0x562a260dbf08)
at /build/qemu-gYtjVn/qemu-5.0.1/hw/virtio/virtio-bus.c:245
#8 0x0000562a23fefb2e in virtio_vmstate_change (opaque=0x562a260dbf90,
running=0, state=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/hw/virtio/virtio.c:3220
#9 0x0000562a2402ebfd in vm_state_notify (running=running@entry=0,
state=state@entry=RUN_STATE_FINISH_MIGRATE)
at /build/qemu-gYtjVn/qemu-5.0.1/softmmu/vl.c:1275
#10 0x0000562a23f7bc02 in do_vm_stop (state=RUN_STATE_FINISH_MIGRATE,
send_stop=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/cpus.c:1032
#11 0x0000562a24209765 in migration_completion (s=0x562a260e83a0)
at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:2914
#12 migration_iteration_run (s=0x562a260e83a0)
at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:3275
#13 migration_thread (opaque=opaque@entry=0x562a260e83a0)
at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:3439
#14 0x0000562a2435ca96 in qemu_thread_start (args=<optimized out>)
at /build/qemu-gYtjVn/qemu-5.0.1/util/qemu-thread-posix.c:519
#15 0x00007feed31466ba in start_thread (arg=0x7feeadc9c700)
at pthread_create.c:333
#16 0x00007feed2e7c41d in __GI___sysctl (name=0x0, nlen=608471908,
oldval=0x562a2452b138, oldlenp=0x0, newval=0x562a2452c5e0
<__func__.28102>, newlen=0)
at ../sysdeps/unix/sysv/linux/sysctl.c:30
#17 0x0000000000000000 in ?? ()
Fix it by checking that the connection coroutine is non-null before
trying to enter it. If it is null, no entering is needed, as the
connection is probably going down anyway.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129073859.683063-3-rvkagan@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
When the reconnect in NBD client is in progress, the iochannel used for
NBD connection doesn't exist. Therefore an attempt to detach it from
the aio_context of the parent BlockDriverState results in a NULL pointer
dereference.
The problem is triggerable, in particular, when an outgoing migration is
about to finish, and stopping the dataplane tries to move the
BlockDriverState from the iothread aio_context to the main loop. If the
NBD connection is lost before this point, and the NBD client has entered
the reconnect procedure, QEMU crashes:
#0 qemu_aio_coroutine_enter (ctx=0x5618056c7580, co=0x0)
at /build/qemu-6MF7tq/qemu-5.0.1/util/qemu-coroutine.c:109
#1 0x00005618034b1b68 in nbd_client_attach_aio_context_bh (
opaque=0x561805ed4c00) at /build/qemu-6MF7tq/qemu-5.0.1/block/nbd.c:164
#2 0x000056180353116b in aio_wait_bh (opaque=0x7f60e1e63700)
at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-wait.c:55
#3 0x0000561803530633 in aio_bh_call (bh=0x7f60d40a7e80)
at /build/qemu-6MF7tq/qemu-5.0.1/util/async.c:136
#4 aio_bh_poll (ctx=ctx@entry=0x5618056c7580)
at /build/qemu-6MF7tq/qemu-5.0.1/util/async.c:164
#5 0x0000561803533e5a in aio_poll (ctx=ctx@entry=0x5618056c7580,
blocking=blocking@entry=true)
at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-posix.c:650
#6 0x000056180353128d in aio_wait_bh_oneshot (ctx=0x5618056c7580,
cb=<optimized out>, opaque=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-wait.c:71
#7 0x000056180345c50a in bdrv_attach_aio_context (new_context=0x5618056c7580,
bs=0x561805ed4c00) at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6172
#8 bdrv_set_aio_context_ignore (bs=bs@entry=0x561805ed4c00,
new_context=new_context@entry=0x5618056c7580,
ignore=ignore@entry=0x7f60e1e63780)
at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6237
#9 0x000056180345c969 in bdrv_child_try_set_aio_context (
bs=bs@entry=0x561805ed4c00, ctx=0x5618056c7580,
ignore_child=<optimized out>, errp=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6332
#10 0x00005618034957db in blk_do_set_aio_context (blk=0x56180695b3f0,
new_context=0x5618056c7580, update_root_node=update_root_node@entry=true,
errp=errp@entry=0x0)
at /build/qemu-6MF7tq/qemu-5.0.1/block/block-backend.c:1989
#11 0x00005618034980bd in blk_set_aio_context (blk=<optimized out>,
new_context=<optimized out>, errp=errp@entry=0x0)
at /build/qemu-6MF7tq/qemu-5.0.1/block/block-backend.c:2010
#12 0x0000561803197953 in virtio_blk_data_plane_stop (vdev=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/hw/block/dataplane/virtio-blk.c:292
#13 0x00005618033d67bf in virtio_bus_stop_ioeventfd (bus=0x5618056d9f08)
at /build/qemu-6MF7tq/qemu-5.0.1/hw/virtio/virtio-bus.c:245
#14 0x00005618031c9b2e in virtio_vmstate_change (opaque=0x5618056d9f90,
running=0, state=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/hw/virtio/virtio.c:3220
#15 0x0000561803208bfd in vm_state_notify (running=running@entry=0,
state=state@entry=RUN_STATE_FINISH_MIGRATE)
at /build/qemu-6MF7tq/qemu-5.0.1/softmmu/vl.c:1275
#16 0x0000561803155c02 in do_vm_stop (state=RUN_STATE_FINISH_MIGRATE,
send_stop=<optimized out>) at /build/qemu-6MF7tq/qemu-5.0.1/cpus.c:1032
#17 0x00005618033e3765 in migration_completion (s=0x5618056e6960)
at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:2914
#18 migration_iteration_run (s=0x5618056e6960)
at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:3275
#19 migration_thread (opaque=opaque@entry=0x5618056e6960)
at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:3439
#20 0x0000561803536ad6 in qemu_thread_start (args=<optimized out>)
at /build/qemu-6MF7tq/qemu-5.0.1/util/qemu-thread-posix.c:519
#21 0x00007f61085d06ba in start_thread ()
from /lib/x86_64-linux-gnu/libpthread.so.0
#22 0x00007f610830641d in sysctl () from /lib/x86_64-linux-gnu/libc.so.6
#23 0x0000000000000000 in ?? ()
Fix it by checking that the iochannel is non-null before trying to
detach it from the aio_context. If it is null, no detaching is needed,
and it will get reattached in the proper aio_context once the connection
is reestablished.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129073859.683063-2-rvkagan@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert now copy_range parameters which are already 64bit to signed
type.
It's safe as we don't work with requests overflowing BDRV_MAX_LENGTH
(which is less than INT64_MAX), and do check the requests in
bdrv_co_copy_range_internal() (by bdrv_check_request32(), which calls
bdrv_check_request()).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-17-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
Now, since bdrv_co_preadv_part() and bdrv_co_pwritev_part() have been
updated, update all their wrappers.
For all of them type of 'bytes' is widening, so callers are safe. We
have update request_fn in blkverify.c simultaneously. Still it's just a
pointer to one of bdrv_co_pwritev() or bdrv_co_preadv(), and type is
widening for callers of the request_fn anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-16-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_preadv_part() and bdrv_co_pwritev_part() and their
remaining dependencies now.
bdrv_pad_request() is updated simultaneously, as pointer to bytes passed
to it both from bdrv_co_pwritev_part() and bdrv_co_preadv_part().
So, all callers of bdrv_pad_request() are updated to pass 64bit bytes.
bdrv_pad_request() is already good for 64bit requests, add
corresponding assertion.
Look at bdrv_co_preadv_part() and bdrv_co_pwritev_part().
Type is widening, so callers are safe. Let's look inside the functions.
In bdrv_co_preadv_part() and bdrv_aligned_pwritev() we only pass bytes
to other already int64_t interfaces (and some obviously safe
calculations), it's OK.
In bdrv_co_do_zero_pwritev() aligned_bytes may become large now, still
it's passed to bdrv_aligned_pwritev which supports int64_t bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-15-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_aligned_preadv() now.
Make the bytes variable in bdrv_padding_rmw_read() int64_t, as it is
only used for pass-through to bdrv_aligned_preadv().
All bdrv_aligned_preadv() callers are safe as type is widening. Let's
look inside:
- add a new-style assertion that request is good.
- callees bdrv_is_allocated(), bdrv_co_do_copy_on_readv() supports
int64_t bytes
- conversion of bytes_remaining is OK, as we never have requests
overflowing BDRV_MAX_LENGTH
- looping through bytes_remaining is ok, num is updated to int64_t
- for bdrv_driver_preadv we have same limit of max_transfer
- qemu_iovec_memset is OK, as bytes+qiov_offset should not overflow
qiov->size anyway (thanks to bdrv_check_qiov_request())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-14-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_do_copy_on_readv() now.
'bytes' type widening, so callers are safe. Look at the function
itself:
bytes, skip_bytes and progress become int64_t.
bdrv_round_to_clusters() is OK, cluster_bytes now may be large.
trace_bdrv_co_do_copy_on_readv() is OK
looping through cluster_bytes is still OK.
pnum is still capped to max_transfer, and to MAX_BOUNCE_BUFFER when we
are going to do COR operation. Therefor calculations in
qemu_iovec_from_buf() and bdrv_driver_preadv() should not change.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-13-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_aligned_pwritev() now and convert the dependencies:
bdrv_co_write_req_prepare() and bdrv_co_write_req_finish() to signed
type bytes.
Conversion of bdrv_co_write_req_prepare() and
bdrv_co_write_req_finish() is definitely safe, as all requests in
block/io must not overflow BDRV_MAX_LENGTH. Still add assertions.
For bdrv_aligned_pwritev() 'bytes' type is widened, so callers are
safe. Let's check usage of the parameter inside the function.
Passing to bdrv_co_write_req_prepare() and bdrv_co_write_req_finish()
is OK.
Passing to qemu_iovec_* is OK after new assertion. All other callees
are already updated to int64_t.
Checking alignment is not changed, offset + bytes and qiov_offset +
bytes calculations are safe (thanks to new assertions).
max_transfer is kept to be int for now. It has a default of INT_MAX
here, and some drivers may rely on it. It's to be refactored later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-12-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_do_pwrite_zeroes() now.
Callers are safe, as converting int to int64_t is safe. Concentrate on
'bytes' usage in the function (thx to Eric Blake):
compute 'int tail' via % 'int alignment' - safe
fragmentation loop 'int num' - still fragments with a cap on
max_transfer
use of 'num' within the loop
MIN(bytes, max_transfer) as well as %alignment - still works, so
calculations in if (head) {} are safe
clamp size by 'int max_write_zeroes' - safe
drv->bdrv_co_pwrite_zeroes(int) - safe because of clamping
clamp size by 'int max_transfer' - safe
buf allocation is still clamped to max_transfer
qemu_iovec_init_buf(size_t) - safe because of clamping
bdrv_driver_pwritev(uint64_t) - safe
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver wrappers parameters which are already 64bit to
signed type.
Requests in block/io.c must never exceed BDRV_MAX_LENGTH (which is less
than INT64_MAX), which makes the conversion to signed 64bit type safe.
Add corresponding assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
All requests in block/io must not overflow BDRV_MAX_LENGTH, all
external users of BdrvTrackedRequest already have corresponding
assertions, so we are safe. Add some assertions still.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Operations with qiov add more restrictions on bytes, let's cover it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The function is called from 64bit io handlers, and bytes is just passed
to throttle_account() which is 64bit too (unsigned though). So, let's
convert intermediate argument to 64bit too.
This patch is a first in the 64-bit-blocklayer series, so we are
generally moving to int64_t for both offset and bytes parameters on all
io paths. Main motivation is realization of 64-bit write_zeroes
operation for fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
Patch-correctness audit by Eric Blake:
Caller has 32-bit, this patch now causes widening which is safe:
block/block-backend.c: blk_do_preadv() passes 'unsigned int'
block/block-backend.c: blk_do_pwritev_part() passes 'unsigned int'
block/throttle.c: throttle_co_pwrite_zeroes() passes 'int'
block/throttle.c: throttle_co_pdiscard() passes 'int'
Caller has 64-bit, this patch fixes potential bug where pre-patch
could narrow, except it's easy enough to trace that callers are still
capped at 2G actions:
block/throttle.c: throttle_co_preadv() passes 'uint64_t'
block/throttle.c: throttle_co_pwritev() passes 'uint64_t'
Implementation in question: block/throttle-groups.c
throttle_group_co_io_limits_intercept() takes 'unsigned int bytes'
and uses it: argument to util/throttle.c throttle_account(uint64_t)
All safe: it patches a latent bug, and does not introduce any 64-bit
gotchas once throttle_co_p{read,write}v are relaxed, and assuming
throttle_account() is not buggy.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201211183934.169161-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Make bdrv_pad_request() honest: return error if
qemu_iovec_init_extended() failed.
Update also bdrv_padding_destroy() to clean the structure for safety.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Prepare for the following patch when bdrv_pad_request() will be able to
fail. Update the comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Calculation of sum may theoretically overflow, so use 64bit type and
add some good assertions.
Use int64_t constantly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion order]
Signed-off-by: Eric Blake <eblake@redhat.com>
Actually, we can't extend the io vector in all cases. Handle possible
MAX_IOV and size_t overflows.
For now add assertion to callers (actually they rely on success anyway)
and fix them in the following patch.
Add also some additional good assertions to qemu_iovec_init_slice()
while being here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
size_to_str() can return a size like "4.24 MiB", with a single digit
integer part and two fractional digits. This is eight characters, but
commit b39847a5 changed the format string to only reserve seven
characters for the column.
This can result in unaligned columns, which in turn changes the output of
iotests case 267 because exceeding the column size defeats the attempt
to filter the size out of the output (observed with the ppc64 emulator).
The resulting change is only a whitespace change, but since commit
f203080b this is enough for iotests to consider the test failed.
Taking a character away from the tag name column and adding it to the VM
size column doesn't change anything in the common case (the tag name is
left justified, the VM size is right justified), but fixes this case.
Fixes: b39847a505
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210202155911.179865-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
NVMe controllers implement different versions of the spec,
and different features of it. It is useful to gather this
information when debugging.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210127212137.3482291-3-philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 15b2260bef ("block/nvme: Trace controller capabilities")
misunderstood the doorbell stride value from the datasheet, use
the correct one. The 'doorbell_scale' variable used few lines
later is correct.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210127212137.3482291-2-philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently, blk_is_read_only() tells whether a given BlockBackend can
only be used in read-only mode because its root node is read-only. Some
callers actually try to answer a slightly different question: Is the
BlockBackend configured to be writable, by taking write permissions on
the root node?
This can differ, for example, for CD-ROM devices which don't take write
permissions, but may be backed by a writable image file. scsi-cd allows
write requests to the drive if blk_is_read_only() returns false.
However, the write request will immediately run into an assertion
failure because the write permission is missing.
This patch introduces separate functions for both questions.
blk_supports_write_perm() answers the question whether the block
node/image file can support writable devices, whereas blk_is_writable()
tells whether the BlockBackend is currently configured to be writable.
All calls of blk_is_read_only() are converted to one of the two new
functions.
Fixes: https://bugs.launchpad.net/bugs/1906693
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a call to fcntl(2) for the purpose of adding file locks fails
with an error other than EAGAIN or EACCES, report the error returned
by fcntl.
EAGAIN or EACCES are elided as they are considered to be common
failures, indicating that a conflicting lock is held by another
process.
No errors are elided when removing file locks.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210113164447.2545785-1-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-21-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Drop unused code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-20-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This brings async request handling and block-status driven chunk sizes
to backup out of the box, which improves backup performance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-18-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-17-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to stop use of this callback in the following commit.
Still the callback handling code will be dropped in a separate commit.
So, for now let's make it optional.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-16-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add new parameters to configure future backup features. The patch
doesn't introduce aio backup requests (so we actually have only one
worker) neither requests larger than one cluster. Still, formally we
satisfy these maximums anyway, so add the parameters now, to facilitate
further patch which will really change backup job behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-11-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add function to cancel running async block-copy call. It will be used
in backup.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to directly use one async block-copy operation for backup
job, so we need rate limiter.
We want to maintain current backup behavior: only background copying is
limited and copy-before-write operations only participate in limit
calculation. Therefore we need one rate limiter for block-copy state
and boolean flag for block-copy call state for actual limitation.
Note, that we can't just calculate each chunk in limiter after
successful copying: it will not save us from starting a lot of async
sub-requests which will exceed limit too much. Instead let's use the
following scheme on sub-request creation:
1. If at the moment limit is not exceeded, create the request and
account it immediately.
2. If at the moment limit is already exceeded, drop create sub-request
and handle limit instead (by sleep).
With this approach we'll never exceed the limit more than by one
sub-request (which pretty much matches current backup behavior).
Note also, that if there is in-flight block-copy async call,
block_copy_kick() should be used after set-speed to apply new setup
faster. For that block_copy_kick() published in this patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It simplifies debugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
They will be used for backup.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-5-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We'll need async block-copy invocation to use in backup directly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Refactor common path to use BlockCopyCallState pointer as parameter, to
prepare it for use in asynchronous block-copy (at least, we'll need to
run block-copy in a coroutine, passing the whole parameters as one
pointer).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Experiments show, that copy_range is not always making things faster.
So, to make experimentation simpler, let's add a parameter. Some more
perf parameters will be added soon, so here is a new struct.
For now, add new backup qmp parameter with x- prefix for the following
reasons:
- We are going to add more performance parameters, some will be
related to the whole block-copy process, some only to background
copying in backup (ignored for copy-before-write operations).
- On the other hand, we are going to use block-copy interface in other
block jobs, which will need performance options as well.. And it
should be the same structure or at least somehow related.
So, there are too much unclean things about how the interface and now
we need the new options mostly for testing. Let's keep them
experimental for a while.
In do_backup_common() new x-perf parameter handled in a way to
make further options addition simpler.
We add use-copy-range with default=true, and we'll change the default
in further patch, after moving backup to use block-copy.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-2-vsementsov@virtuozzo.com>
[mreitz: s/5\.2/6.0/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch completes the series with the COR-filter applied to
block-stream operations.
Adding the filter makes it possible in future implement discarding
copied regions in backing files during the block-stream job, to reduce
the disk overuse (we need control on permissions).
Also, the filter now is smart enough to do copy-on-read with specified
base, so we have benefit on guest reads even when doing block-stream of
the part of the backing chain.
Several iotests are slightly modified due to filter insertion.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-14-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a direct link to target bs for convenience and to simplify
following commit which will insert COR filter above target bs.
This is a part of original commit written by Andrey.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-13-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The code already don't freeze base node and we try to make it prepared
for the situation when base node is changed during the operation. In
other words, block-stream doesn't own base node.
Let's introduce a new interface which should replace the current one,
which will in better relations with the code. Specifying bottom node
instead of base, and requiring it to be non-filter gives us the
following benefits:
- drop difference between above_base and base_overlay, which will be
renamed to just bottom, when old interface dropped
- clean way to work with parallel streams/commits on the same backing
chain, which otherwise become a problem when we introduce a filter
for stream job
- cleaner interface. Nobody will surprised the fact that base node may
disappear during block-stream, when there is no word about "base" in
the interface.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-11-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Stream in stream_prepare calls bdrv_change_backing_file() to change
backing-file in the metadata of bs.
It may use either backing-file parameter given by user or just take
filename of base on job start.
Backing file format is determined by base on job finish.
There are some problems with this design, we solve only two by this
patch:
1. Consider scenario with backing-file unset. Current concept of stream
supports changing of the base during the job (we don't freeze link to
the base). So, we should not save base filename at job start,
- let's determine name of the base on job finish.
2. Using direct base to determine filename and format is not very good:
base node may be a filter, so its filename may be JSON, and format_name
is not good for storing into qcow2 metadata as backing file format.
- let's use unfiltered_base
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: change commit subject, change logic in stream_prepare]
Message-Id: <20201216061703.70908-10-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the flag BDRV_REQ_PREFETCH was set, skip idling read/write
operations in COR-driver. It can be taken into account for the
COR-algorithms optimization. That check is being made during the
block stream job by the moment.
Add the BDRV_REQ_PREFETCH flag to the supported_read_flags of the
COR-filter.
block: Modify the comment for the flag BDRV_REQ_PREFETCH as we are
going to use it alone and pass it to the COR-filter driver for further
processing.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-9-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add the new member supported_read_flags to the BlockDriverState
structure. It will control the flags set for copy-on-read operations.
Make the block generic layer evaluate supported read flags before they
go to a block driver.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: use assert instead of abort]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an option to limit copy-on-read operations to specified sub-chain
of backing-chain, to make copy-on-read filter useful for block-stream
job.
Suggested-by: Max Reitz <mreitz@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: change subject, modified to freeze the chain,
do some fixes]
Message-Id: <20201216061703.70908-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Provide the possibility to pass the 'filter-node-name' parameter to the
block-stream job as it is done for the commit block job.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: comment indentation, s/Since: 5.2/Since: 6.0/]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-5-vsementsov@virtuozzo.com>
[mreitz: s/commit/stream/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Provide API for the COR-filter removal. Also, drop the filter child
permissions for an inactive state when the filter node is being
removed.
To insert the filter, the block generic layer function
bdrv_insert_node() can be used.
The new function bdrv_cor_filter_drop() may be considered as an
intermediate solution before the QEMU permission update system has
overhauled. Then we are able to implement the API function
bdrv_remove_node() on the block generic layer.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for the recently introduced functions
bdrv_co_preadv_part()
and
bdrv_co_pwritev_part()
to the COR-filter driver.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-2-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Register a yank function which shuts down the socket and sets
s->state = NBD_CLIENT_QUIT. This is the same behaviour as if an
error occured.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <b73eb07db6d1fcd00667beb13ae6117260f002c3.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but
GNUTLS_CFLAGS, that describe include path, are not propagated
transitively to all users of crypto and build fails if GnuTLS headers
reside in non-standard directory (which is a case for homebrew on Apple
Silicon).
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
cURL 7.16.0 was released in October 2006. Just remove code that is
in all likelihood not being used anywhere, and require the oldest version
found in currently supported distros, which is 7.29.0 from CentOS 7.
pkg-config is enough for QEMU, since it does not need extra information
such as the path for certicate authorities. All supported platforms
today will all have pkg-config for curl, so we can drop curl-config.
Suggested-by: Daniel Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows converting the dependencies to meson options one by one.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
