Commit Graph

435 Commits

Author SHA1 Message Date
Marc-André Lureau
9a232487aa acpi: fix a comment about aml_call0()
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-20 08:58:58 +03:00
Igor Mammedov
dd1b2037a3 virt_arm: acpi: reuse common build_fadt()
Extend generic build_fadt() to support rev5.1 FADT
and reuse it for 'virt' board, it would allow to
phase out usage of AcpiFadtDescriptorRev5_1 and
later ACPI_FADT_COMMON_DEF.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13 23:09:50 +02:00
Igor Mammedov
8612f8bd9f acpi: move build_fadt() from i386 specific to generic ACPI source
It will be extended and reused by follow up patch for ARM target.

PS:
Since it's generic function now, don't patch FIRMWARE_CTRL, DSDT
fields if they don't point to tables since platform might not
provide them and use X_ variants instead if applicable.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13 23:09:50 +02:00
Igor Mammedov
d0384d9020 acpi: add build_append_gas() helper for Generic Address Structure
it will help to add Generic Address Structure to ACPI tables
without using packed C structures and avoid endianness
issues as API doesn't need an explicit conversion.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13 23:09:50 +02:00
Markus Armbruster
112ed241f5 qapi: Empty out qapi-schema.json
The previous commit improved compile time by including less of the
generated QAPI headers.  This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.

Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.

It's possible everywhere, except:

* monitor.c needs qmp-command.h to get qmp_init_marshal()

* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
  qapi-event.h to get enum QAPIEvent

Perhaps we'll get rid of those some other day.

Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster
9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster
922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Markus Armbruster
abb297ed44 Include qmp-commands.h exactly where needed
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-7-armbru@redhat.com>
[OSX breakage fixed]
2018-02-09 13:52:10 +01:00
Markus Armbruster
e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Haozhong Zhang
cb836434cd nvdimm: add 'unarmed' option
Currently the only vNVDIMM backend can guarantee the guest write
persistence is device DAX on Linux, because no host-side kernel cache
is involved in the guest access to it. The approach to detect whether
the backend is device DAX needs to access sysfs, which may not work
with SELinux.

Instead, we add the 'unarmed' option to device 'nvdimm', so that users
or management utils, which have enough knowledge about the backend,
can control the unarmed flag in guest ACPI NFIT via this option. The
guest Linux NVDIMM driver, for example, will mark the corresponding
vNVDIMM device read-only if the unarmed flag in guest NFIT is set.

The default value of 'unarmed' option is 'off' in order to keep the
backwards compatibility.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-4-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-19 11:18:51 -02:00
Michael S. Tsirkin
acc95bc850 Merge remote-tracking branch 'origin/master' into HEAD
Resolve conflicts around apb.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-11 22:03:50 +02:00
Philippe Mathieu-Daudé
9dc047ce8f hw/acpi: ACPI_PM_* defines are not restricted to i386 arch
this allows to remove the old i386/pc dependency on acpi/core.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
Philippe Mathieu-Daudé
e9808d0969 hw: use "qemu/osdep.h" as first #include in source files
applied using ./scripts/clean-includes

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
David Gibson
fd56e0612b pci: Eliminate redundant PCIDevice::bus pointer
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.

Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05 19:13:45 +02:00
Roman Kagan
939dd2d350 vmgenid: use UUID property type
Switch vmgenid device to use the UUID property type introduced in the
previous patch for its 'guid' property.

One semantic change it introduces is that post-realize modification of
'guid' via HMP or QMP will now be rejected with an error; however,
according to docs/specs/vmgenid.txt this is actually desirable.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-05 19:13:45 +02:00
Peter Maydell
a8b392ac9a * TCG 8-byte atomic accesses bugfix (Andrew)
* Report disk rotation rate (Daniel)
 * Report invalid scsi-disk block size configuration (Mark)
 * KVM and memory API MemoryListener fixes (David, Maxime, Peter Xu)
 * x86 CPU hotplug crash fix (Igor)
 * Load/store API documentation (Peter Maydell)
 * Small fixes by myself and Thomas
 * qdev DEVICE_DELETED deferral (Michael)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlnnJUgUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMifwf/dTZwtGqvAV4+jezCiZ3MTknz39dM
 HOGnD3m2xy04QT5LHiwDmaLFXy1y/AUVQm79JMPN4dKoFvtruREoWUq8EU0FCsLZ
 PkdCbJuXKGiBYMRXkQQxeT8lAyaBQwZdc+O9mYuOrSGZOQscA7SxgClYmzVdVzcy
 ZNTqkuaw1NDIAapdfGv94WLza4Nb8XX8bFwohgkf4mLDXifhjYHQTbBTfB0NqPxH
 Rk3HU+wgYUCJRYXpvktESgzRo5sm1aozCRq3f0Y6RV12ylgF6GG4CyN7YcKRn8eh
 NZbyehHiF5YU2kuvO9SmAB+FqM2+aMtq8uuNuI1Nxgd222MOVaChyWc3jg==
 =gmUj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* TCG 8-byte atomic accesses bugfix (Andrew)
* Report disk rotation rate (Daniel)
* Report invalid scsi-disk block size configuration (Mark)
* KVM and memory API MemoryListener fixes (David, Maxime, Peter Xu)
* x86 CPU hotplug crash fix (Igor)
* Load/store API documentation (Peter Maydell)
* Small fixes by myself and Thomas
* qdev DEVICE_DELETED deferral (Michael)

# gpg: Signature made Wed 18 Oct 2017 10:56:24 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (29 commits)
  scsi: reject configurations with logical block size > physical block size
  qdev: defer DEVICE_DEL event until instance_finalize()
  Revert "qdev: Free QemuOpts when the QOM path goes away"
  qdev: store DeviceState's canonical path to use when unparenting
  qemu-pr-helper: use new libmultipath API
  watch_mem_write: implement 8-byte accesses
  notdirty_mem_write: implement 8-byte accesses
  memory: reuse section_from_flat_range()
  kvm: simplify kvm_align_section()
  kvm: region_add and region_del is not called on updates
  kvm: fix error message when failing to unregister slot
  kvm: tolerate non-existing slot for log_start/log_stop/log_sync
  kvm: fix alignment of ram address
  memory: call log_start after region_add
  target/i386: trap on instructions longer than >15 bytes
  target/i386: introduce x86_ld*_code
  tco: add trace events
  docs/devel/loads-stores.rst: Document our various load and store APIs
  nios2: define tcg_env
  build: remove CONFIG_LIBDECNUMBER
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-19 15:38:07 +01:00
Paolo Bonzini
6a24f34e5c tco: add trace events
Add trace events to the PCH watchdog timer, it can be useful to see how
the guest is using it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1507816448-86665-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-16 18:03:52 +02:00
Eduardo Habkost
fd3b02c889 pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFACE_PCIE_DEVICE set:

* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3

2) base-pci-bridge

Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:

* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge

The direct subtypes of base-pci-bridge not touched by this patch
are:

* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
  marked as PCIe-only devices.

3) megasas-base

Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.

"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".

Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:43 +03:00
Marc-André Lureau
5f9252f7cc fw_cfg: add write callback
Reintroduce the write callback that was removed when write support was
removed in commit 023e314856.

Contrary to the previous callback implementation, the write_cb
callback is called whenever a write happened, so handlers must be
ready to handle partial write as necessary.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:40 +03:00
Alistair Francis
8297be80f7 Convert multi-line fprintf() to warn_report()
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.

All of the warnings were changed using these commands:
  find ./* -type f -exec sed -i \
    'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
    {} +
  find ./* -type f -exec sed -i \
    'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
    {} +
  find ./* -type f -exec sed -i \
    'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
    {} +
  find ./* -type f -exec sed -i \
    'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
    {} +
  find ./* -type f -exec sed -i \
    'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
    {} +
  find ./* -type f -exec sed -i \
    'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
    {} +
  find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
    {} +

Indentation fixed up manually afterwards.

Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.

The #include lines were manually updated to allow the code to compile.

Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 14:09:34 +02:00
Alistair Francis
2ab4b13563 Convert single line fprintf(.../n) to warn_report()
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.

All of the warnings were changed using this command:
  find ./* -type f -exec sed -i \
    's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
    {} +

Some of the lines were manually edited to reduce the line length to below
80 charecters.

The #include lines were manually updated to allow the code to compile.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 14:09:34 +02:00
Marc-André Lureau
c8389550de vmgenid: replace x-write-pointer-available hack
This compat property sole function is to prevent the device from being
instantiated. Instead of requiring an extra compat property, check if
fw_cfg has DMA enabled.

fw_cfg is a built-in device that is initialized very early by the
machine init code.  We have at least one other device that also
assumes fw_cfg_find() can be safely used on realize: pvpanic.

This has the additional benefit of handling other cases properly, like:

  $ qemu-system-x86_64 -device vmgenid -machine none
  qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
  $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.9 -global fw_cfg.dma_enabled=off
  qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
  $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.6 -global fw_cfg.dma_enabled=on
  [boots normally]

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08 16:15:17 +03:00
Yoni Bettan
0b4a775188 acpi/vmgenid: change device category to misc
Moved vmgenid from uncategorized to misc category in QEMU help menu

Signed-off-by: Yoni Bettan <ybettan@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08 16:15:17 +03:00
Anthony PERARD
2bed1ba77f Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen"
This reverts commit 153eba4726.

This patch prevents PCI passthrough hotplug on Xen. Even if the Xen tool
stack prepares its own ACPI tables, we still rely on QEMU for hotplug
ACPI notifications.

The original issue is fixed by the two previous patch:
  hw/acpi: Limit hotplug to root bus on legacy mode
  hw/acpi: Move acpi_set_pci_info to pcihp

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08 16:15:17 +03:00
Anthony PERARD
ab938ae43f hw/acpi: Move acpi_set_pci_info to pcihp
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL
being set on a PCI bus that supports ACPI hotplug. It should work
regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen).
So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation
part from QEMU's ACPI table generator.

To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs
to be set, but this was done only when ACPI tables are built which is
not needed for a Xen guest. The need for the property starts with commit
"pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice"
(f0c9d64a68).

Adding find_i440fx into stubs so that mips-softmmu target can be built.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08 16:15:17 +03:00
Anthony PERARD
f5855994fe hw/acpi: Limit hotplug to root bus on legacy mode
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08 16:15:17 +03:00
Philippe Mathieu-Daudé
87e0331c5a docs: fix broken paths to docs/devel/tracing.txt
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31 13:12:53 +03:00
Thomas Huth
cbca3722a3 include/exec/poison: Mark CONFIG_KVM as poisoned, too
CONFIG_KVM is only defined for target-specific code, so nobody should
use it by accident in common code. To avoid such subtle bugs,
CONFIG_KVM is now marked as poisoned in common code. The header
include/sysemu/kvm.h is somewhat special since it is included
all over the place from common code, too, so we need some extra
logic via "#ifdef NEED_CPU_H" here to make sure that we can
compile all files without problems.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04 14:30:03 +02:00
Marc-André Lureau
c03d83d55a pcihp: use get_uint() for "bsel" property
The property is defined with object_property_add_uint32_ptr()

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-24-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:32 +02:00
Marc-André Lureau
b053ef6106 pc-dimm: make "size" property uint64
This carries the memory_region_size() value without implicit cast.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-23-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:32 +02:00
Marc-André Lureau
9ed442b8ae pc-dimm: use get_uint() for dimm properties
TYPE_PC_DIMM's property PC_DIMM_ADDR_PROP is defined with
DEFINE_PROP_UINT64().

TYPE_PC_DIMM's property PC_DIMM_NODE_PROP is defined with
DEFINE_PROP_UINT32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-22-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:32 +02:00
Marc-André Lureau
01b2ffcedd qapi: merge QInt and QFloat in QNum
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.

Add a few more tests while at it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:31 +02:00
Haozhong Zhang
20fdef58a0 nvdimm acpi: fix region format interface code
Per ACPI 6.2, section 5.2.25.6 and JEDEC Annex L Release 3, the
current region format interface code 0x201 indicates the block
addressed function interface 1, rather than a byte addressable
interface. Fix it by using 0x301 which indicates the byte addressable
no energy backed function interface 1.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-08 22:02:36 +03:00
Eric Blake
cf83f14005 shutdown: Add source information to SHUTDOWN and RESET
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.

It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.

Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23 13:28:17 +02:00
Stefan Hajnoczi
adb354dd1e pci, virtio, vhost: fixes
A bunch of fixes that missed the release.
 Most notably we are reverting shpc back to enabled by default state
 as guests uses that as an indicator that hotplug is supported
 (even though it's unused). Unfortunately we can't fix this
 on the stable branch since that would break migration.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZHMOuAAoJECgfDbjSjVRp/5IH/3kOa7yV3KUi4QVbQV7WwBH3
 LK+/jwIz4UhOZn+bS4qi+gjN6aFhNoBNDFmYsRTWKKdLMvZvkRBMDcv8DMIKeAyl
 kG/ispv8VI+GY/CRKnqzPm0FSulv8WPRryxkdGzK4oHiMv+4FpFR0v/n9NRHjwTA
 XNJ4k33IqBldXyZwwAzP5dT019EMvbn4bNrkLzlcF2w8mTWPf43eX/kIkRX0cAys
 5IVTQVGEOwpnyV0jxJDP+aoVMrqv8xl88LLuRpTgWUo0UnxXL5/GZQOCCUN6DQ7M
 BOLmyyP9mT9k8iUI+fQsDxAtY7cL9torq+p985nQdH0nxmI3GCoufn9aJG0J9yc=
 =d34x
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_upstream' into staging

pci, virtio, vhost: fixes

A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 17 May 2017 10:42:06 PM BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* mst/tags/for_upstream:
  exec: abstract address_space_do_translate()
  pci: deassert intx when pci device unrealize
  virtio: allow broken device to notify guest
  Revert "hw/pci: disable pci-bridge's shpc by default"
  acpi-defs: clean up open brace usage
  ACPI: don't call acpi_pcihp_device_plug_cb on xen
  iommu: Don't crash if machine is not PC_MACHINE
  pc: add 2.10 machine type
  pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot
  libvhost-user: fix crash when rings aren't ready
  hw/virtio: fix vhost user fails to startup when MQ
  hw/arm/virt: generate 64-bit addressable ACPI objects
  hw/acpi-defs: replace leading X with x_ in FADT field names

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18 10:01:08 +01:00
Eduardo Habkost
e90f2a8c3e qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.

When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.

Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.

Except for code comments, changes were generated using the
following Coccinelle patch:

  @@
  expression DC;
  @@
  (
  -DC->cannot_instantiate_with_device_add_yet = false;
  +DC->user_creatable = true;
  |
  -DC->cannot_instantiate_with_device_add_yet = true;
  +DC->user_creatable = false;
  )

  @@
  typedef ObjectClass;
  expression dc;
  identifier class, data;
  @@
   static void device_class_init(ObjectClass *class, void *data)
   {
   ...
   dc->hotpluggable = true;
  +dc->user_creatable = true;
   ...
   }

  @@
  @@
   struct DeviceClass {
   ...
  -bool cannot_instantiate_with_device_add_yet;
  +bool user_creatable;
   ...
  }

  @@
  expression DC;
  @@
  (
  -!DC->cannot_instantiate_with_device_add_yet
  +DC->user_creatable
  |
  -DC->cannot_instantiate_with_device_add_yet
  +!DC->user_creatable
  )

Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-17 10:37:00 -03:00
Igor Mammedov
ea2650724c pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-9-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:49 -03:00
He Chen
0f203430dd numa: Allow setting NUMA distance for different NUMA nodes
This patch is going to add SLIT table support in QEMU, and provides
additional option `dist` for command `-numa` to allow user set vNUMA
distance by QEMU command.

With this patch, when a user wants to create a guest that contains
several vNUMA nodes and also wants to set distance among those nodes,
the QEMU command would like:

```
-numa node,nodeid=0,cpus=0 \
-numa node,nodeid=1,cpus=1 \
-numa node,nodeid=2,cpus=2 \
-numa node,nodeid=3,cpus=3 \
-numa dist,src=0,dst=1,val=21 \
-numa dist,src=0,dst=2,val=31 \
-numa dist,src=0,dst=3,val=41 \
-numa dist,src=1,dst=2,val=21 \
-numa dist,src=1,dst=3,val=31 \
-numa dist,src=2,dst=3,val=21 \
```

Signed-off-by: He Chen <he.chen@linux.intel.com>
Message-Id: <1493260558-20728-1-git-send-email-he.chen@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:37 -03:00
Bruce Rogers
153eba4726 ACPI: don't call acpi_pcihp_device_plug_cb on xen
Commit f0c9d64a exposed the issue that with a xenfv machine using
pci passthrough, acpi pci hotplug code was being executed by mistake.
Guard calls to acpi_pcihp_device_plug_cb (and corresponding
acpi_pcihp_device_unplug_cb) with a check for xen_enabled(). Without
this check I am seeing an error that the bus doesn't have the
acpi-pcihp-bsel property set.

Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-10 22:04:23 +03:00
Ard Biesheuvel
cb51ac2ffe hw/arm/virt: generate 64-bit addressable ACPI objects
Our current ACPI table generation code limits the placement of ACPI
tables to 32-bit addressable memory, in order to be able to emit the
root pointer (RSDP) and root table (RSDT) using table types from the
ACPI 1.0 days.

Since ARM was not supported by ACPI before version 5.0, it makes sense
to lift this restriction. This is not crucial for mach-virt, which is
guaranteed to have some memory available below the 4 GB mark, but it
is a nice to have for QEMU machines that do not have any 32-bit
addressable memory, which is not uncommon for real world 64-bit ARM
systems.

Since we already emit a version of the RSDP root pointer that has a
secondary 64-bit wide address field for the 64-bit root table (XSDT),
all we need to do is replace the RSDT generation with the generation
of an XSDT table, and use a different slot in the FADT table to refer
to the DSDT.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
2017-05-10 22:04:23 +03:00
Paolo Bonzini
8c9f42f3cf tco: do not generate an NMI
This behavior is not indicated in the datasheet and can confuse the OS.
The TCO can trap NMIs from SERR# or IOCHK# and convert them to SMIs; but
any other TCO event is either delivered as an SMI or completely disabled.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-05 17:23:52 +02:00
Laszlo Ersek
f92063028a hw/acpi/vmgenid: prevent more than one vmgenid device
A system with multiple VMGENID devices is undefined in the VMGENID spec by
omission.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ben Warren <ben@skyportsystems.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2017-03-22 18:29:27 +02:00
Laszlo Ersek
f2a1ae45d8 hw/acpi/vmgenid: prevent device realization on pre-2.5 machine types
The WRITE_POINTER linker/loader command that underlies VMGENID depends on
commit baf2d5bfba ("fw-cfg: support writeable blobs", 2017-01-12), which
in turn depends on fw_cfg DMA.

DMA for fw_cfg is enabled in 2.5+ machine types only (see commit
e6915b5f3a, "fw_cfg: unbreak migration compatibility for 2.4 and earlier
machines", 2016-02-18).

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ben Warren <ben@skyportsystems.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com <mailto:ben@skyportsystems.com>>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2017-03-22 18:27:35 +02:00
Ben Warren
72d9196f1e Bugfix: Handle error if VM Generation ID device not present
This was crashing due to NULL-pointer dereference

QMP Test case:
==============

(QEMU) query-vm-generation-id
{"error": {"class": "GenericError", "desc": "VM Generation ID device not
found"}}

HMP Test case:
==============
virsh # qemu-monitor-command --hmp 3 info vm-generation-id
VM Generation ID device not found

Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-15 19:37:19 +02:00
Peter Maydell
9a81b792cc virtio, pc: fixes, features
virtio support for region caches broke a bunch of stuff - fixing most of
 it though it's not ideal.  Still pondering the right way to fix it.
 New: VM gen ID and hotplug for PXB.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYt7llAAoJECgfDbjSjVRp+r4H/1cmQ4F67H8oSOAT8xuAQFku
 OdHoVRJMWf7CRvZ7JqVke/a877d+h6ZpfW5dZQ7hp7O7rkPiuPHa5PVb0WGwDqrD
 scSOIvDPxJm19pnfZoF4zx+Ov45W5ahF+gwwm/sJU232ApLqOmAjs0FUxidkadQE
 f5Jrjs20WO2Vkkcd3U7Zl31myre0V7AbwIm7dB/8B+dpL6bJcxSvlM4krwLdBY6S
 lLs9V6ypRzjUxS3MDANL75KNrO/zys55J+Pa4sEh4+H0OX71v9Icl3s1zaM8J/EN
 VPjdqhDvJuEahc50FbJyRZQGIzOZ6PcGMsKUHKlxoVmDYZ6Pv5lOnpaLZRT6HMk=
 =ITdO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc: fixes, features

virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal.  Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  hw/pxb-pcie: fix PCI Express hotplug support
  tests/acpi: update DSDT after last patch
  acpi: simplify _OSC
  virtio: unbreak virtio-pci with IOMMU after caching ring translations
  virtio: add missing region cache init in virtio_load()
  virtio: invalidate memory in vring_set_avail_event()
  virtio: guard vring access when setting notification
  virtio: check for vring setup in virtio_queue_empty
  MAINTAINERS: Add VM Generation ID entries
  tests: Move reusable ACPI code into a utility file
  qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
  ACPI: Add Virtual Machine Generation ID support
  ACPI: Add vmgenid blob storage to the build tables
  docs: VM Generation ID device description
  linker-loader: Add new 'write pointer' command

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-03 10:09:03 +00:00
Igor Mammedov
39164c136c qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
Add commands to query Virtual Machine Generation ID counter.

QMP command example:
    { "execute": "query-vm-generation-id" }

HMP command example:
    info vm-generation-id

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02 07:14:27 +02:00
Ben Warren
d03637bcfb ACPI: Add Virtual Machine Generation ID support
This implements the VM Generation ID feature by passing a 128-bit
GUID to the guest via a fw_cfg blob.
Any time the GUID changes, an ACPI notify event is sent to the guest

The user interface is a simple device with one parameter:
 - guid (string, must be "auto" or in UUID format
   xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)

Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02 07:14:27 +02:00
Ben Warren
c7809e6cd7 ACPI: Add vmgenid blob storage to the build tables
This allows them to be centrally initialized and destroyed

The "AcpiBuildTables.vmgenid" array will be used to construct the
"etc/vmgenid_guid" fw_cfg blob.

Its contents will be linked into fw_cfg after being built on the
pc_machine_done() -> acpi_setup() -> acpi_build() call path, and dropped
without use on the subsequent, guest triggered, acpi_build_update() ->
acpi_build() call path.

Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02 07:14:26 +02:00
Ben Warren
489886d118 linker-loader: Add new 'write pointer' command
This is similar to the existing 'add pointer' functionality, but instead
of instructing the guest (BIOS or UEFI) to patch memory, it instructs
the guest to write the pointer back to QEMU via a writeable fw_cfg file.

Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02 07:14:26 +02:00
Marc-André Lureau
675f22c6d3 bus: do not unref hotplug handler
Apparently, none of the bus owner give a reference to the hotplug
handler property, do not unref it on bus release.

Furthermore, a bus is allowed to be its own hotplug handler, which can
be seen in qbus_set_bus_hotplug_handler() function. However, in this
case, the reference can't be given to the property, or this will create
a cyclic dependency and the bus will never be free.

Each bus owner should manage the lifecycle of the hotplug handler.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-01 11:51:28 +04:00
Igor Mammedov
f0c9d64a68 pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice
PCI hotplug for bridges was introduced only since 2.0 however
  acpi_set_bsel()->object_property_add_uint32_ptr(bus, ACPI_PCIHP_PROP_BSEL)
didn't take in account that for legacy mode (1.7) when
PCI hotplug for bridges is unavailable and ACPI_PCIHP_PROP_BSEL property
the only bus "PCI.0' has been created earlier at acpi_pcihp_init() time.

We managed to live with it only because of error rised by adding
a duplicate property in acpi_set_bsel() has been ignored which
resulted in useless leaking of just allocated (int)bus_bsel.

Issue affects only 1.7 machine type as ACPI tables supported by
QEMU were introduced at that time, but there wasn't PCI hotplug
for bridges till the next release (2.0).

Fix it by removing duplicate ACPI_PCIHP_PROP_BSEL intialization
in acpi_pcihp_init() and doing it only in one place acpi_set_pci_info().

PS:
do not ignore error returned by object_property_add_uint32_ptr()
and abort QEMU since it's programming error which should be fixed
instead of being ignored.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1470211497-116801-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Remove now unused ACPI_PCIHP_LEGACY_SIZE ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-03-01 11:51:05 +04:00
Igor Pavlikevich
6c608953a5 hw/acpi/tco.c: fix tco timer stop
TCO timer does not actually stop

Signed-off-by: Igor Pavlikevich <ipavlikevich@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-02-28 09:03:39 +03:00
Igor Mammedov
8aba384298 change CPUArchId.cpu type to Object*
so it could be reused for SPAPR cores as well

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Igor Mammedov
80e5db303d machine: Make possible_cpu_arch_ids() return const pointer
make sure that external callers won't try to modify
possible_cpus and owner of possible_cpus can access
it directly when it modifies it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-23 21:25:37 -02:00
Paolo Bonzini
9f57061c35 acpi: filter based on CONFIG_ACPI_X86 rather than TARGET
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub
instead, so that -acpitable can be later extended to ARM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini
6a997d3b76 stubs: move acpi stubs to hw/acpi
No need to include them in libqemustub.a, since only system emulators
need them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Igor Mammedov
e1a58fc05a memhp: move DIMM devices into dedicated scope with related common methods
Move DIMM devices from global _SB scope to a new \_SB.MHPC
container along with common methods used by DIMMs:
  MCRS, MRST, MPXM, MOST, MEJ00, MSCN, MTFY

this reduces AML size on 12 * #slots bytes,
i.e. up to 3072 bytes for 265 slots.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
80db0e7822 memhp: don't generate memory hotplug AML if it's not enabled/supported
That reduces DSDT by 910 bytes when memory hotplug
isn't enabled.

While doing so drop intermediate variables/arguments
passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making
it local to memory_hotplug.c, hardcoding it there as
it can't change.

Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through
intermediate variables/arguments where it's not needed.
Instead initialize in module static variable when MMIO
region is mapped and use that within memory_hotplug.c
whenever it's required.
That way MMIO base specified only at one place and AML
with MMIO would always use the same value.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
c9c0854580 memhp: move memory hotplug only defines to memory_hotplug.c
Move defines used locally only by memory_hotplug.c into it
from header files.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
d1957dac34 memhp: move GPE handler_E03 into build_memory_hotplug_aml()
>From this patch all the memory hotplug related AML
bits are consolidated in one place within DSTD.
Follow up patches will utilize that to simplify
memory hotplug related C/AML code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
8b35ab271c memhp: merge build_memory_devices() into build_memory_hotplug_aml()
It consolidates memory hotplug AML in one place within DSDT

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10 07:03:23 +02:00
Igor Mammedov
8dfba500af memhp: consolidate scattered MHPD device declaration
since static and dynamic parts of memory MHPD device are now
in the same table (DSDT), there is no point keeping
them scattered across the table, so consolidate it
in one place.

There aren't any functional change, only AML text movement
from externally refferenced MHPD scope directly into
MHPD device declaration.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:23 +02:00
Igor Mammedov
75ff0f0c90 memhp: move build_memory_devices() into memory_hotplug.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:23 +02:00
Igor Mammedov
a2088da36e memhp: move build_memory_hotplug_aml() into memory_hotplug.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:23 +02:00
Xiao Guangrong
cb88ebd754 nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
and use it to replace the raw number

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
aef056c11d nvdimm acpi: use aml_name_decl to define named object
to make the code more clearer

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
5a33db78b0 nvdimm acpi: rename nvdimm_dsm_reserved_root
Rename it to nvdimm_dsm_handle_reserved_root_method

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
7adbce6339 nvdimm acpi: fix two comments
fixed the English issue and code-style issue

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
c2fa30757a nvdimm acpi: define DSM return codes
and use these codes to refine the code

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
284197e41f nvdimm acpi: rename nvdimm_acpi_hotplug
Rename it to nvdimm_plug()

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
880f361253 nvdimm acpi: cleanup nvdimm_build_fit
inline buf_size to refine the code a bit

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
cf7c0ff521 nvdimm acpi: rename nvdimm_plugged_device_list
Its behavior has been changed as the nvdimm device which is being
realized also will be handled in this function, so rename it to
reflect the fact

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
264813cb9d nvdimm acpi: clean up nvdimm_build_acpi
To make the code more clearer, we
1) check ram_slots first, and build ssdt & nfit only when it is available
2) use nvdimm_get_plugged_device_list() to check if there is nvdimm device
   plugged

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
75f2749822 pc: memhp: move nvdimm hotplug out of memory hotplug
as they use completely different way to handle hotplug event

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
12f86b5b3e nvdimm acpi: drop the lock of fit buffer
as there is a global lock to protect vm-exit handlers and
QMP/monitor, this lock can be dropped

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
c7f8d0f3a5 qdev: hotplug: drop HotplugHandler.post_plug callback
as nvdimm acpi is okay to build fit when the nvdimm device
has not been 'realized'

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Haozhong Zhang
53000638f2 acpi: fix assert failure caused by commit 35c5a52d
Commit 35c5a52d "acpi: do not use TARGET_PAGE_SIZE" changed struct
NvdimmDsmIn from a variable-size structure to a fixed-size structure of
4096 bytes. It forgot to adjust an assert in
nvdimm_dsm_set_label_data(..., NvdimmDsmIn *in, ...):
    assert(sizeof(*in) + sizeof(*set_label_data) + set_label_data->length <=
           4096);
which could crash QEMU when guest writes NVDIMM labels.

Fix it by replacing sizeof(*in) by offsetof(NvdimmDsmIn, arg3).

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Corey Minyard
698ae42b91 acpi/ipmi: Initialize the fwinfo before fetching it
The initialization was missed before, resulting in some
bad data in the smbus case.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
b097cc52fc pc: memhp: enable nvdimm device hotplug
_GPE.E04 is dedicated for nvdimm device hotplug

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
806864d9a8 nvdimm acpi: introduce _FIT
_FIT is required for hotplug support, guest will inquire the updated
device info from it if a hotplug event is received

As FIT buffer is not completely mapped into guest address space, so a
new function, Read FIT whose UUID is UUID
648B9CF2-CDA1-4312-8AD9-49C4AF32BD62, handle 0x10000, function index
is 0x1, is reserved by QEMU to read the piece of FIT buffer. The buffer
is concatenated before _FIT return

Refer to docs/specs/acpi-nvdimm.txt for detailed design

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
75b0713e18 nvdimm acpi: introduce fit buffer
The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, it will be used to construct NVDIMM
ACPI _FIT method which reflects the presented nvdimm devices after
nvdimm hotplug

As FIT buffer can not completely mapped into guest address space,
OSPM will exit to QEMU multiple times, however, there is the race
condition - FIT may be changed during these multiple exits, so that
some rules are introduced:
1) the user should hold the @lock to access the buffer and
2) mark @dirty whenever the buffer is updated.

@dirty is cleared for the first time OSPM gets fit buffer, if
dirty is detected in the later access, OSPM will restart the
access

As fit should be updated after nvdimm device is successfully realized
so that a new hotplug callback, post_hotplug, is introduced

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
bdfd065b1f nvdimm acpi: prebuild nvdimm devices for available slots
For each NVDIMM present or intended to be supported by platform,
platform firmware also exposes an ACPI Namespace Device under
the root device

So it builds nvdimm devices for all slots to support vNVDIMM hotplug

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
3ae66c45f9 nvdimm acpi: use common macros instead of magic names
There are some names repeatedly used in acpi code, define them
as macros to refine the code

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
fa1a448dda acpi nvdimm: rename result_size to dsm_out_buf_siz
Rename it as dsm_out_buf_siz is more descriptive

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
08f0fbaac4 nvdimm acpi: compile nvdimm acpi code arch-independently
As the arch dependent info, TARGET_PAGE_SIZE, has been dropped
from nvdimm acpi code, it can be compiled arch-independently

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
48bee47697 acpi nvdimm: fix Arg6 usage
As the function only has 5 args, we use local7 instead of it

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
dba00936ea acpi nvdimm: fix ARG3 conflict
As ARG3 is a reserved name, we rename it to FARG

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
6ab0c4bd1d acpi nvdimm: fix device physical address base
According to ACPI 6.0  spec, "Memory Device Physical Address
Region Base" in memdev is defined as "This field provides the
Device Physical Address base of the region". This field should
be zero in our case

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
c0b3b863ac acpi nvdimm: fix OperationRegion definition
Based on ACPI spec:
 RegionOffset := TermArg => Integer

However, Named object is not a TermArg.

This patch moves OperationRegion to NCAL() and uses localX as
its RegionOffset

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
d51d1d7ede acpi nvdimm: fix wrong buffer size returned by DSM method
Currently, 'RLEN' is the totally buffer size written by QEMU and it is
ACPI internally used only. The buffer size returned to guest should
not include 'RLEN' itself

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Igor Mammedov
6a91cf04a1 pc: Leave max apic_id_limit only in legacy cpu hotplug code
That's enough to make old code that depends on it
to prevent QEMU starting with more than 255 CPUs.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24 17:29:15 -02:00
Igor Mammedov
f9dc175d84 acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254
Switch to modern cpu hotplug at machine startup time if
a cpu present at boot has apic-id in range unsupported
by legacy cpu hotplug interface (i.e. > 254), to avoid
killing QEMU from legacy cpu hotplug code with error:
   "acpi: invalid cpu id: #apic-id#"

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24 17:29:14 -02:00
Igor Mammedov
e2c9593945 pc: acpi: x2APIC support for MADT table and _MAT method
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24 17:29:14 -02:00
Igor Mammedov
271119313c acpi: provide _PXM method for CPU devices if QEMU is started numa enabled
Workaround for long standing issue where Linux kernel
assigns hotplugged CPU to 1st numa node as it discards
proximity for possible CPUs from SRAT after it's parsed.

_PXM method allows linux query proximity directly from
hotplugged CPU object, which allows Linux to assing CPU
to the correct numa node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 01:16:57 +03:00
David Kiarie
fb9f592623 hw/i386: AMD IOMMU IVRS table
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.

Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-24 01:02:01 +03:00
Laurent Vivier
e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00
Eric Blake
09204eac9b opts-visitor: Favor new visit_free() function
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
Igor Mammedov
679dd1a957 pc: use new CPU hotplug interface since 2.7 machine type
For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.

While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:38 +03:00
Igor Mammedov
76623d00ae acpi: cpuhp: add cpu._OST handling
it adds HW and AML parts for CPU_Device._OST method
handling to allow OSPM reports status of hot-(un)plug
operation.
And extends QMP command query-acpi-ospm-status to report
CPU's OST info along with already reported PC-DIMM devices.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:35 +03:00
Igor Mammedov
8872c25a26 acpi: cpuhp: implement hot-remove parts of CPU hotplug interface
it adds hw registers needed for handling CPU hot-remove and
corresponding AML methods to request and eject a CPU with
necessary hotplug callbacks in pc,piix4,ich9 code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:26 +03:00