Commit Graph

435 Commits

Author SHA1 Message Date
Igor Mammedov
f0c9d64a68 pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice
PCI hotplug for bridges was introduced only since 2.0 however
  acpi_set_bsel()->object_property_add_uint32_ptr(bus, ACPI_PCIHP_PROP_BSEL)
didn't take in account that for legacy mode (1.7) when
PCI hotplug for bridges is unavailable and ACPI_PCIHP_PROP_BSEL property
the only bus "PCI.0' has been created earlier at acpi_pcihp_init() time.

We managed to live with it only because of error rised by adding
a duplicate property in acpi_set_bsel() has been ignored which
resulted in useless leaking of just allocated (int)bus_bsel.

Issue affects only 1.7 machine type as ACPI tables supported by
QEMU were introduced at that time, but there wasn't PCI hotplug
for bridges till the next release (2.0).

Fix it by removing duplicate ACPI_PCIHP_PROP_BSEL intialization
in acpi_pcihp_init() and doing it only in one place acpi_set_pci_info().

PS:
do not ignore error returned by object_property_add_uint32_ptr()
and abort QEMU since it's programming error which should be fixed
instead of being ignored.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1470211497-116801-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Remove now unused ACPI_PCIHP_LEGACY_SIZE ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-03-01 11:51:05 +04:00
Igor Pavlikevich
6c608953a5 hw/acpi/tco.c: fix tco timer stop
TCO timer does not actually stop

Signed-off-by: Igor Pavlikevich <ipavlikevich@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-02-28 09:03:39 +03:00
Igor Mammedov
8aba384298 change CPUArchId.cpu type to Object*
so it could be reused for SPAPR cores as well

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Igor Mammedov
80e5db303d machine: Make possible_cpu_arch_ids() return const pointer
make sure that external callers won't try to modify
possible_cpus and owner of possible_cpus can access
it directly when it modifies it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-23 21:25:37 -02:00
Paolo Bonzini
9f57061c35 acpi: filter based on CONFIG_ACPI_X86 rather than TARGET
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub
instead, so that -acpitable can be later extended to ARM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini
6a997d3b76 stubs: move acpi stubs to hw/acpi
No need to include them in libqemustub.a, since only system emulators
need them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Igor Mammedov
e1a58fc05a memhp: move DIMM devices into dedicated scope with related common methods
Move DIMM devices from global _SB scope to a new \_SB.MHPC
container along with common methods used by DIMMs:
  MCRS, MRST, MPXM, MOST, MEJ00, MSCN, MTFY

this reduces AML size on 12 * #slots bytes,
i.e. up to 3072 bytes for 265 slots.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
80db0e7822 memhp: don't generate memory hotplug AML if it's not enabled/supported
That reduces DSDT by 910 bytes when memory hotplug
isn't enabled.

While doing so drop intermediate variables/arguments
passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making
it local to memory_hotplug.c, hardcoding it there as
it can't change.

Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through
intermediate variables/arguments where it's not needed.
Instead initialize in module static variable when MMIO
region is mapped and use that within memory_hotplug.c
whenever it's required.
That way MMIO base specified only at one place and AML
with MMIO would always use the same value.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
c9c0854580 memhp: move memory hotplug only defines to memory_hotplug.c
Move defines used locally only by memory_hotplug.c into it
from header files.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
d1957dac34 memhp: move GPE handler_E03 into build_memory_hotplug_aml()
>From this patch all the memory hotplug related AML
bits are consolidated in one place within DSTD.
Follow up patches will utilize that to simplify
memory hotplug related C/AML code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:24 +02:00
Igor Mammedov
8b35ab271c memhp: merge build_memory_devices() into build_memory_hotplug_aml()
It consolidates memory hotplug AML in one place within DSDT

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10 07:03:23 +02:00
Igor Mammedov
8dfba500af memhp: consolidate scattered MHPD device declaration
since static and dynamic parts of memory MHPD device are now
in the same table (DSDT), there is no point keeping
them scattered across the table, so consolidate it
in one place.

There aren't any functional change, only AML text movement
from externally refferenced MHPD scope directly into
MHPD device declaration.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:23 +02:00
Igor Mammedov
75ff0f0c90 memhp: move build_memory_devices() into memory_hotplug.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:23 +02:00
Igor Mammedov
a2088da36e memhp: move build_memory_hotplug_aml() into memory_hotplug.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10 07:03:23 +02:00
Xiao Guangrong
cb88ebd754 nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
and use it to replace the raw number

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
aef056c11d nvdimm acpi: use aml_name_decl to define named object
to make the code more clearer

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
5a33db78b0 nvdimm acpi: rename nvdimm_dsm_reserved_root
Rename it to nvdimm_dsm_handle_reserved_root_method

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
7adbce6339 nvdimm acpi: fix two comments
fixed the English issue and code-style issue

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
c2fa30757a nvdimm acpi: define DSM return codes
and use these codes to refine the code

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
284197e41f nvdimm acpi: rename nvdimm_acpi_hotplug
Rename it to nvdimm_plug()

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
880f361253 nvdimm acpi: cleanup nvdimm_build_fit
inline buf_size to refine the code a bit

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
cf7c0ff521 nvdimm acpi: rename nvdimm_plugged_device_list
Its behavior has been changed as the nvdimm device which is being
realized also will be handled in this function, so rename it to
reflect the fact

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
264813cb9d nvdimm acpi: clean up nvdimm_build_acpi
To make the code more clearer, we
1) check ram_slots first, and build ssdt & nfit only when it is available
2) use nvdimm_get_plugged_device_list() to check if there is nvdimm device
   plugged

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
75f2749822 pc: memhp: move nvdimm hotplug out of memory hotplug
as they use completely different way to handle hotplug event

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
12f86b5b3e nvdimm acpi: drop the lock of fit buffer
as there is a global lock to protect vm-exit handlers and
QMP/monitor, this lock can be dropped

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Xiao Guangrong
c7f8d0f3a5 qdev: hotplug: drop HotplugHandler.post_plug callback
as nvdimm acpi is okay to build fit when the nvdimm device
has not been 'realized'

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15 17:20:37 +02:00
Haozhong Zhang
53000638f2 acpi: fix assert failure caused by commit 35c5a52d
Commit 35c5a52d "acpi: do not use TARGET_PAGE_SIZE" changed struct
NvdimmDsmIn from a variable-size structure to a fixed-size structure of
4096 bytes. It forgot to adjust an assert in
nvdimm_dsm_set_label_data(..., NvdimmDsmIn *in, ...):
    assert(sizeof(*in) + sizeof(*set_label_data) + set_label_data->length <=
           4096);
which could crash QEMU when guest writes NVDIMM labels.

Fix it by replacing sizeof(*in) by offsetof(NvdimmDsmIn, arg3).

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Corey Minyard
698ae42b91 acpi/ipmi: Initialize the fwinfo before fetching it
The initialization was missed before, resulting in some
bad data in the smbus case.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
b097cc52fc pc: memhp: enable nvdimm device hotplug
_GPE.E04 is dedicated for nvdimm device hotplug

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
806864d9a8 nvdimm acpi: introduce _FIT
_FIT is required for hotplug support, guest will inquire the updated
device info from it if a hotplug event is received

As FIT buffer is not completely mapped into guest address space, so a
new function, Read FIT whose UUID is UUID
648B9CF2-CDA1-4312-8AD9-49C4AF32BD62, handle 0x10000, function index
is 0x1, is reserved by QEMU to read the piece of FIT buffer. The buffer
is concatenated before _FIT return

Refer to docs/specs/acpi-nvdimm.txt for detailed design

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
75b0713e18 nvdimm acpi: introduce fit buffer
The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, it will be used to construct NVDIMM
ACPI _FIT method which reflects the presented nvdimm devices after
nvdimm hotplug

As FIT buffer can not completely mapped into guest address space,
OSPM will exit to QEMU multiple times, however, there is the race
condition - FIT may be changed during these multiple exits, so that
some rules are introduced:
1) the user should hold the @lock to access the buffer and
2) mark @dirty whenever the buffer is updated.

@dirty is cleared for the first time OSPM gets fit buffer, if
dirty is detected in the later access, OSPM will restart the
access

As fit should be updated after nvdimm device is successfully realized
so that a new hotplug callback, post_hotplug, is introduced

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
bdfd065b1f nvdimm acpi: prebuild nvdimm devices for available slots
For each NVDIMM present or intended to be supported by platform,
platform firmware also exposes an ACPI Namespace Device under
the root device

So it builds nvdimm devices for all slots to support vNVDIMM hotplug

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
3ae66c45f9 nvdimm acpi: use common macros instead of magic names
There are some names repeatedly used in acpi code, define them
as macros to refine the code

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:09 +02:00
Xiao Guangrong
fa1a448dda acpi nvdimm: rename result_size to dsm_out_buf_siz
Rename it as dsm_out_buf_siz is more descriptive

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
08f0fbaac4 nvdimm acpi: compile nvdimm acpi code arch-independently
As the arch dependent info, TARGET_PAGE_SIZE, has been dropped
from nvdimm acpi code, it can be compiled arch-independently

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
48bee47697 acpi nvdimm: fix Arg6 usage
As the function only has 5 args, we use local7 instead of it

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
dba00936ea acpi nvdimm: fix ARG3 conflict
As ARG3 is a reserved name, we rename it to FARG

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
6ab0c4bd1d acpi nvdimm: fix device physical address base
According to ACPI 6.0  spec, "Memory Device Physical Address
Region Base" in memdev is defined as "This field provides the
Device Physical Address base of the region". This field should
be zero in our case

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
c0b3b863ac acpi nvdimm: fix OperationRegion definition
Based on ACPI spec:
 RegionOffset := TermArg => Integer

However, Named object is not a TermArg.

This patch moves OperationRegion to NCAL() and uses localX as
its RegionOffset

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Xiao Guangrong
d51d1d7ede acpi nvdimm: fix wrong buffer size returned by DSM method
Currently, 'RLEN' is the totally buffer size written by QEMU and it is
ACPI internally used only. The buffer size returned to guest should
not include 'RLEN' itself

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01 19:21:08 +02:00
Igor Mammedov
6a91cf04a1 pc: Leave max apic_id_limit only in legacy cpu hotplug code
That's enough to make old code that depends on it
to prevent QEMU starting with more than 255 CPUs.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24 17:29:15 -02:00
Igor Mammedov
f9dc175d84 acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254
Switch to modern cpu hotplug at machine startup time if
a cpu present at boot has apic-id in range unsupported
by legacy cpu hotplug interface (i.e. > 254), to avoid
killing QEMU from legacy cpu hotplug code with error:
   "acpi: invalid cpu id: #apic-id#"

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24 17:29:14 -02:00
Igor Mammedov
e2c9593945 pc: acpi: x2APIC support for MADT table and _MAT method
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24 17:29:14 -02:00
Igor Mammedov
271119313c acpi: provide _PXM method for CPU devices if QEMU is started numa enabled
Workaround for long standing issue where Linux kernel
assigns hotplugged CPU to 1st numa node as it discards
proximity for possible CPUs from SRAT after it's parsed.

_PXM method allows linux query proximity directly from
hotplugged CPU object, which allows Linux to assing CPU
to the correct numa node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 01:16:57 +03:00
David Kiarie
fb9f592623 hw/i386: AMD IOMMU IVRS table
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.

Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-24 01:02:01 +03:00
Laurent Vivier
e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00
Eric Blake
09204eac9b opts-visitor: Favor new visit_free() function
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
Igor Mammedov
679dd1a957 pc: use new CPU hotplug interface since 2.7 machine type
For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.

While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:38 +03:00
Igor Mammedov
76623d00ae acpi: cpuhp: add cpu._OST handling
it adds HW and AML parts for CPU_Device._OST method
handling to allow OSPM reports status of hot-(un)plug
operation.
And extends QMP command query-acpi-ospm-status to report
CPU's OST info along with already reported PC-DIMM devices.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:35 +03:00
Igor Mammedov
8872c25a26 acpi: cpuhp: implement hot-remove parts of CPU hotplug interface
it adds hw registers needed for handling CPU hot-remove and
corresponding AML methods to request and eject a CPU with
necessary hotplug callbacks in pc,piix4,ich9 code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:26 +03:00
Igor Mammedov
d2238cb678 acpi: cpuhp: implement hot-add parts of CPU hotplug interface
it adds hw registers needed for handling CPU hot-add and
corresponding AML methods to handle hot-add events on
guest side.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:22 +03:00
Igor Mammedov
ac35f13ba8 pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook
Add madt_cpu callback to AcpiDeviceIfClass and use
it for generating LAPIC MADT entries for CPUs.

Later it will be used for generating x2APIC
entries in case of more than 255 CPUs and also
would be reused by ARM target when ACPI CPU hotplug
is introduced there.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:16 +03:00
Igor Mammedov
5e1b5d9388 acpi: cpuhp: add CPU devices AML with _STA method
it adds CPU objects to DSDT with _STA method
and QEMU side of CPU hotplug interface initialization
with registers sufficient to handle _STA requests,
including necessary hotplug callbacks in piix4,ich9 code.

Hot-(un)plug hw/acpi parts will be added by
corresponding follow up patches.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:01 +03:00
Igor Mammedov
16bcab97eb pc: piix4/ich9: add 'cpu-hotplug-legacy' property
It will be used to select which hotplug call-back is called
and for switching from legacy mode into new one.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:20:55 +03:00
Xiao Guangrong
14e44198ff nvdimm acpi: support Set Namespace Label Data function
Function 6 is used to set Namespace Label Data

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
2b9e57fc7f nvdimm acpi: support Get Namespace Label Data function
Function 5 is used to get Namespace Label Data

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
5797dcdc7a nvdimm acpi: support Get Namespace Label Size function
Function 4 is used to get Namespace label size

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
d15fc53f8d nvdimm acpi: check revision
Currently only revision 1 is supported

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
189f4d5635 nvdimm acpi: abstract the operations for root & nvdimm devices
It separates the operations between root device and nvdimm devices
in order to introducing label functions support for nvdimm device

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
90623ebf60 nvdimm acpi: check UUID
Check arg0 which indicates UUID to see if it is valid

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
4568c94806 nvdimm acpi: save arg3 of _DSM method
Check if the input Arg3 is valid then store it into ARG3 if it is
needed

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
732b530c1b nvdimm acpi: set HDLE properly
Now we pass HDLE to Qemu properly, use 0 for root device and use the
handle for nvdimm devices

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
052889b8e9 acpi: add aml_call5
It will be used by NVDIMM ACPI

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Xiao Guangrong
b265f27c5a acpi: add aml_object_type
Implement ObjectType which is used by NVDIMM _DSM method in
later patch

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Corey Minyard
86e91dd713 acpi: Add IPMI table entries
Use the ACPI table construction tools to create an ACPI entry
for IPMI.  This adds a function called build_acpi_ipmi_devices
to add an DSDT entry for IPMI if IPMI is compiled in and an
IPMI device exists.  It also adds a dummy function if IPMI
is not compiled in.

This conforms to section "C3-2 Locating IPMI System Interfaces in
ACPI Name Space" in the IPMI 2.0 specification.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Peter Maydell
b0ad00b8c9 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
 EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
 G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
 sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
 5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
 j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
 =eUnF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request: (42 commits)
  trace: split out trace events for linux-user/ directory
  trace: split out trace events for qom/ directory
  trace: split out trace events for target-ppc/ directory
  trace: split out trace events for target-s390x/ directory
  trace: split out trace events for target-sparc/ directory
  trace: split out trace events for net/ directory
  trace: split out trace events for audio/ directory
  trace: split out trace events for ui/ directory
  trace: split out trace events for hw/alpha/ directory
  trace: split out trace events for hw/arm/ directory
  trace: split out trace events for hw/acpi/ directory
  trace: split out trace events for hw/vfio/ directory
  trace: split out trace events for hw/s390x/ directory
  trace: split out trace events for hw/pci/ directory
  trace: split out trace events for hw/ppc/ directory
  trace: split out trace events for hw/9pfs/ directory
  trace: split out trace events for hw/i386/ directory
  trace: split out trace events for hw/isa/ directory
  trace: split out trace events for hw/sd/ directory
  trace: split out trace events for hw/sparc/ directory
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20 22:30:34 +01:00
Daniel P. Berrange
65b5bd3be5 trace: split out trace events for hw/acpi/ directory
Move all trace-events for files in the hw/acpi/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-31-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Eduardo Habkost
9be385980d coccinelle: Remove unnecessary variables for function return value
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.

Manual fixups:

* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
  "remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
  want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
  statements

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-20 16:38:13 +02:00
Igor Mammedov
28213cb6a6 acpi: make bios_linker_loader_add_checksum() API offset based
It should help to make clear that bios_linker works in terms
of offsets within a file. Also it should prevent mistakes
where user passes as arguments pointers to unrelated to file blobs.

While at it, considering that it's a ACPI checksum and
it's initial value must be 0, move checksum field zeroing
into bios_linker_loader_add_checksum() instead of doing it
at every call site manually before bios_linker_loader_add_checksum()
is called.

In addition add extra boundary checks.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:39:27 +03:00
Igor Mammedov
4678124bb9 acpi: make bios_linker_loader_add_pointer() API offset based
cleanup bios_linker_loader_add_pointer() API by switching
arguments to taking offsets relative to corresponding files
instead of doing pointer arithmetic on behalf of user which
were confusing.

Also make offset inside of source file explicit in API
so that user won't have to manually set it in
destination file blob and while at it add additional
boundary checks.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:39:27 +03:00
Igor Mammedov
8cc87c3179 acpi: cleanup bios_linker_loader_cleanup()
bios_linker_loader_cleanup() is called only from one place
and returned value is immediately freed wich makes returning
pointer from bios_linker_loader_cleanup() useless.

Cleanup bios_linker_loader_cleanup() by freeing
data there so that caller won't have to free it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:39:27 +03:00
Igor Mammedov
ad9671b870 acpi: simplify bios_linker API by removing redundant 'table' argument
'table' argument in bios_linker_add_foo() commands is
a data blob of one of files also passed to the same API.
So instead of passing blob in every API call, add and keep
file name association with related blob at bios_linker_loader_alloc()
time.

And find blob by name looking up allocated file entries
inside of bios_linker_add_foo() commands.

It will:
 - make API less confusing,
 - enforce calling bios_linker_loader_alloc() before
   calling any bios_linker_add_foo()
 - make sure that blob is the correct one, i.e.
   associated with the right file name

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:39:27 +03:00
Igor Mammedov
0e9b9edae7 acpi: convert linker from GArray to BIOSLinker structure
Patch just changes type of of linker variables to
a structure, there aren't any functional changes.

Converting linker to a structure will allow to extend
it functionality in follow up patch adding sanity blob
checks.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
0058c08238 pc: use AcpiDeviceIfClass.send_event to issue GPE events
it reduces number of args passed in handlers by 1 and
a number of used proxy wrappers saving ~20LOC.
Also it allows to make cpu/mem hotplug code more
universal as it would allow ARM to reuse it without
rewrite by providing its own send_event callback
to trigger events usiong GPIO instead of GPE
as fixed hadrware ACPI model doen't have GPE at all.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
eaf23bf794 acpi: extend ACPI interface to provide send_event hook
send_event() hook will allow to send ACPI event in
a target specific way (GPE or GPIO based impl.)
it will also simplify proxy wrappers in piix4pm/ich9
that access ACPI regs and SCI which are part of
piix4pm/lcp_ich9 devices and call acpi_foo() API directly.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
76bdd24ec0 pc: acpi: cpuhp-legacy: switch ProcessorID to possible_cpus idx
In legacy cpu-hotplug ProcessorID == APIC ID is used
in MADT and cpu-hotplug AML. It was fine as both
are 8bit and unique. Spec depricated Processor()
with corresponding ProcessorID and advises to use
Device() and UID instead of it.

However UID is just 32bit and it can't fit ARM's
arch_id(MPIDR) which is 64bit. Also in case of
sparse arch_id() distribution, managment/lookup
of maps by arch_id(APIC ID/MPIDR) becomes complex
and expensive.

In preparation to common CPU hotplug with ARM
and to simplify lookup in possible_cpus[] map
switch ProcessorID to possible_cpus index in
MADT.

Legacy cpu-hotplug considerations:
HW interface of it is APIC ID based bitmask so
it's impossible to change, also CPON package in
AML also APIC ID based as well all the methods.

To avoid massive rewrite of AML keep is so and
just break assumption that ProcessorID == APIC ID,
ammending CPU_MAT_METHOD to accept APIC ID and
possible_cpus index, it needs them both to patch
MADT entry template. Also switch to possible_cpus
index Processor(ProcessorID) AML.
That way changes to MADT/AML are minimal and kept
inside AML/MADT not affecting external interfaces.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
ebd8ea8244 pc: acpi: simplify build_legacy_cpu_hotplug_aml() signature
since IO block used by CPU hotplug is fixed size and
initialized it the same file as build_legacy_cpu_hotplug_aml()
just use ACPI_GPE_PROC_LEN directly instead of passing
it around in several files.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
672a287227 pc: acpi: consolidate legacy CPU hotplug in one file
Since AML part of CPU hotplug is tightly coupled with
its hardware part (IO port layout/protocol), move
build_legacy_cpu_hotplug_aml() to cpu_hotplug.c
and remove empty cpu_hotplug_acpi_table.c

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
96e3e12bff pc: acpi: mark current CPU hotplug functions as legacy
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
a630bb314c pc: acpi: cpu-hotplug: make AML CPU_foo defines local to cpu_hotplug_acpi_table.c
now as those defines are used only locally inside of
cpu_hotplug_acpi_table.c, move them out of header file.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
8edf77e497 pc: acpi: consolidate \GPE._E02 with the rest of CPU hotplug AML
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
7c2991fa11 pc: acpi: consolidate CPU hotplug AML
move the former SSDT part of CPU hoplug close to DSDT part.
AML is only moved but there isn't any functional change.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
7bc6fd2464 acpi: add aml_refof()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Igor Mammedov
e8977414a2 acpi: add aml_debug()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07 15:36:54 +03:00
Paolo Bonzini
35c5a52d1d acpi: do not use TARGET_PAGE_SIZE
This is a #define used by the CPU.  NVDIMM can just use 4K
unconditionally.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Paolo Bonzini
87776ab72b qemu-common: stop including qemu/host-utils.h from qemu-common.h
Move it to the actual users.  There are some inclusions of
qemu/host-utils.h in headers, but they are all necessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Paolo Bonzini
7d0c99a9d8 explicitly include qom/cpu.h
exec/cpu-all.h includes qom/cpu.h.  Explicit inclusion
will keep things working when cpu.h will not be included
indirectly almost everywhere (either directly or through
qemu-common.h).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:27 +02:00
Shannon Zhao
64b831367b ACPI: move acpi_build_srat_memory to common place
Move acpi_build_srat_memory to common place so that it could be reused
by ARM. Rename it to build_srat_memory.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:28 +01:00
Gerd Hoffmann
1beb99f787 Revert "acpi: mark PMTIMER as unlocked"
This reverts commit 7070e085d4.

Commit message claims locking is not needed, but that appears
to not be true, seabios ehci driver runs into timekeeping problems
with this, see
	https://bugzilla.redhat.com/show_bug.cgi?id=1322713

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1460702609-25971-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-02 17:19:13 +01:00
Igor Mammedov
1dbfd7892b acpi: fix bios linker loadder COMMAND_ALLOCATE on bigendian host
'make check' fails with:

ERROR:tests/bios-tables-test.c:493:load_expected_aml:
   assertion failed: (g_file_test(aml_file, G_FILE_TEST_EXISTS))

since commit:
caf50c7166
tests: pc: acpi: drop not needed 'expected SSDT' blobs

Assert happens because qemu-system-x86_64 generates
SSDT table and test looks for a corresponding expected
table to compare with.

However there is no expected SSDT blob anymore, since
QEMU souldn't generate one. As it happens BIOS is not
able to read ACPI tables from QEMU and fallbacks to
embeded legacy ACPI codepath, which generates SSDT.
That happens due to wrongly sized endiannes conversion
which makes
 uint8_t BiosLinkerLoaderEntry.alloc.zone
end up with 0 due to truncation of 32 bit integer
which on host is 1 or 2.

Fix it by dropping invalid cpu_to_le32() as uint8_t
doesn't require any conversion.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1330174

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-05-01 15:42:13 +03:00
Rutuja Shah
73bcb24d93 Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed.  This replacement improves the readability and
understandability of code.

For example,

    timer_mod(fdctrl->result_timer,
	      qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));

NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.

Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Markus Armbruster
da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Eduardo Habkost
34294e2f54 module: Rename machine_init() to opts_init()
The only remaining users of machine_init() only call
qemu_add_opts(). Rename machine_init() to opts_init() and move it
closer to the qemu_add_opts() calls on vl.c.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-03-16 15:54:23 -03:00
Xiao Guangrong
f7df22de56 nvdimm acpi: emulate dsm method
Emulate dsm method after IO VM-exit

Currently, we only introduce the framework and no function is actually
supported

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:59:11 +02:00
Xiao Guangrong
18c440e1e1 nvdimm acpi: let qemu handle _DSM method
If dsm memory is successfully patched, we let qemu fully emulate
the dsm method

This patch saves _DSM input parameters into dsm memory, tell dsm
memory address to QEMU, then fetch the result from the dsm memory

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:59:11 +02:00
Xiao Guangrong
b99514135b nvdimm acpi: introduce patched dsm memory
The dsm memory is used to save the input parameters and store
the dsm result which is filled by QEMU.

The address of dsm memory is decided by bios and patched into
int32 object named "MEMA"

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:59:11 +02:00
Xiao Guangrong
5fe79386ba nvdimm acpi: initialize the resource used by NVDIMM ACPI
32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM
ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into
NVDIMM ACPI binary code

OSPM uses this port to tell QEMU the final address of the DSM memory
and notify QEMU to emulate the DSM method

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:59:11 +02:00
Michael S. Tsirkin
f203549108 acpi: add build_append_named_dword, returning an offset in buffer
This is a very limited form of support for runtime patching -
similar in functionality to what we can do with ACPI_EXTRACT
macros in python, but implemented in C.

This is to allow ACPI code direct access to data tables -
which is exactly what DataTableRegion is there for, except
no known windows release so far implements DataTableRegion.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 14:54:28 +02:00
Xiao Guangrong
3f3009c098 acpi: allow using object as offset for OperationRegion
Extend aml_operation_region() to use object as offset

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 14:54:28 +02:00
Xiao Guangrong
9815cba502 acpi: add aml_concatenate()
It will be used by nvdimm acpi

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 14:54:28 +02:00
Xiao Guangrong
39b6dbd8d7 acpi: add aml_create_field()
It will be used by nvdimm acpi

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 14:54:27 +02:00
Eric Blake
96a1616c85 qapi-dealloc: Reduce use outside of generated code
No need to roll our own use of the dealloc visitors when we can
just directly use the qapi_free_FOO() functions that do what we
want in one line.

In net.c, inline net_visit() into its remaining lone caller.

After this patch, test-visitor-serialization.c is the only
non-generated file that needs to use a dealloc visitor, because
it is testing low level aspects of the visitor interface.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1456262075-3311-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-04 17:16:32 +01:00
Eduardo Habkost
18d6abae3e ich9: Remove enable_tco arguments from init functions
The enable_tco arguments are always true, so they are not needed
anymore.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-25 13:14:19 +02:00
Michael S. Tsirkin
b54ca0c3df bios-linker-loader: document+validate input
While guest/host ABI is documented in hw/acpi/bios-linker-loader.c,
the API was left undocumented.

This adds documentation for all API functions.

Additionally, input is validated to make sure all
pointers fall within range of provided files.

To allow this validation for checksum commands,
bios_linker_loader_add_checksum is changed to accept GArray * in place
of void *.

Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23 12:55:16 +02:00
Eric Blake
d7bce9999d qom: Swap 'name' next to visitor in ObjectPropertyAccessor
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.

Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).

    @ rule1 @
    identifier fn;
    typedef Object, Visitor, Error;
    identifier obj, v, opaque, name, errp;
    @@
     void fn
    - (Object *obj, Visitor *v, void *opaque, const char *name,
    + (Object *obj, Visitor *v, const char *name, void *opaque,
       Error **errp) { ... }

    @@
    identifier rule1.fn;
    expression obj, v, opaque, name, errp;
    @@
     fn(obj, v,
    -   opaque, name,
    +   name, opaque,
        errp)

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00
Eric Blake
51e72bc1dd qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp).  This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order.  It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.

Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.

Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.

Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
 $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings').  The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.

    // Part 1: Swap declaration order
    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_start_struct
    -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type bool, TV, T1;
    identifier ARG1;
    @@
     bool visit_optional
    -(TV v, T1 ARG1, const char *name)
    +(TV v, const char *name, T1 ARG1)
     { ... }

    @@
    type TV, TErr, TObj, T1;
    identifier OBJ, ARG1;
    @@
     void visit_get_next_type
    -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_type_enum
    -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj;
    identifier OBJ;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
     void VISIT_TYPE
    -(TV v, TObj OBJ, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, TErr errp)
     { ... }

    // Part 2: swap caller order
    @@
    expression V, NAME, OBJ, ARG1, ARG2, ERR;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
    (
    -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
    +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -visit_optional(V, ARG1, NAME)
    +visit_optional(V, NAME, ARG1)
    |
    -visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
    +visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
    |
    -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
    +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -VISIT_TYPE(V, OBJ, NAME, ERR)
    +VISIT_TYPE(V, NAME, OBJ, ERR)
    )

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00
Laszlo Ersek
88594e4fd1 acpi: add function to extract oem_id and oem_table_id from the user's SLIC
The acpi_get_slic_oem() function stores pointers to these fields in the
(first) SLIC table that the user passes in with the -acpitable switch.

Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
2016-02-06 20:44:10 +02:00
Laszlo Ersek
5151355898 acpi: expose oem_id and oem_table_id in build_rsdt()
Since build_rsdt() is implemented as common utility code (in
"hw/acpi/aml-build.c"), it should expose -- and forward -- the oem_id and
oem_table_id parameters between board code and the generic build_header()
function.

Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-02-06 20:44:10 +02:00
Laszlo Ersek
37ad223c51 acpi: take oem_id in build_header(), optionally
This patch is the continuation of commit 8870ca0e94 ("acpi: support
specified oem table id for build_header"). It will allow us to control the
OEM ID field too in the SDT header.

Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> (maintainer:NVDIMM)
Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-02-06 20:44:10 +02:00
Paolo Bonzini
508127e243 log: do not unnecessarily include qom/cpu.h
Split the bits that require it to exec/log.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03 09:19:10 +00:00
Peter Maydell
b6a0aa0537 x86: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Peter Maydell
692a5519ab trivial patches for 2016-01-11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWk2pEAAoJEL7lnXSkw9fbYKkIAJED5g08gImjxN5opEh2mxlJ
 /TfzFLmDz6AS67eBjCLVVVI0SZ4RAHyZFySFE8PFeRRQFdigqJUeR2U8Ivwnx2I8
 3ALfKa3H1omEe82o+WGDm9pLkVmzmsLSaUZJ4I7uOSRqSE3w45hMsI5j/sR+hbpy
 yjNOzYFRc84uJswiXUFwsCUCEqokyG83ShjaQpR7J3IjRhe2qqy/WmVi7+ZOBH+/
 ti8ut2PMs8oS4G45uzBPDaSp7ByJ/jP9uc8YrOC1i88jxc+3XXzTLYSn7oX4OPGv
 P0PC6ytBNIwfGaZges1rEGNXryAmJys04GOPt3tqRtT6r7mrEvpLBWZvQru2Z8Y=
 =N4aD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-01-11' into staging

trivial patches for 2016-01-11

# gpg: Signature made Mon 11 Jan 2016 08:39:32 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2016-01-11:
  hw/s390x: Remove superfluous return statements
  hw/core/qdev: Remove superfluous return statement
  hw/acpi: Remove superfluous return statement
  hw/ide: Remove superfluous return statements
  osdep.h: Include glib-compat.h in osdep.h rather than qemu-common.h
  scripts/checkpatch.pl: Don't allow special cases of unspaced operators
  PCI Bonito: QOMify and cleanup
  SH PCI Host: convert to realize()
  gt64120: convert to realize()
  Add missing syscall nrs. according to more recent Linux kernels
  hw/misc/edu: Convert to realize()
  configure: fix trace backend check
  xen/Makefile.objs: simplify
  crypto: Fix typo in example
  MAINTAINERS: Add the correct device_tree.h file
  iscsi: fix readcapacity error message
  net: convert qemu_log to error_report, fix message
  linux-user: enable sigaltstack for all architectures
  unicore32: convert get_sp_from_cpustate from macro to inline

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 12:56:58 +00:00
Thomas Huth
ff433bbb82 hw/acpi: Remove superfluous return statement
The "return;" statement at the end of acpi_memory_plug_cb()
does not make much sense, so let's remove it.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Igor Mammedov
6b30608774 pc: acpi: cpuhp: move \_GPE._E02() into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
f294ecbc13 pc: acpi: cpuhp: move PRSC() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
40f981a02d pc: acpi: cpuhp: move CPST() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
1d608d13eb pc: acpi: cpuhp: move CPMA() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
fbd7a6b8e2 pc: acpi: cpuhp: move CPEJ() method to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
f84548dda4 pc: acpi: memhp: drop not needed stringify(MEMORY_foo) usage
most of MEMORY_foo defines are not shared
with ASL anymore and are used only inside of
memory_hotplug_acpi_table.c, so move them
there and make them strings. As result we
can replace stringify(MEMORY_foo) with just
MEMORY_foo, which makes code a bit cleaner.

No AML change introduced by this patch.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
2ca66546ce pc: acpi: memhp: move MHPD Device into SSDT
move remnants of MHPD device from DSDT into SSDT.
 i.e. Device(MHPD), _UID, _HID

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
c943764596 pc: acpi: memhp: move MHPD.MCRS method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
e328e31660 pc: acpi: memhp: move MHPD.MEJ0 method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
2fbd884372 pc: acpi: memhp: move MHPD.MOST method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
fb775d9074 pc: acpi: memhp: move MHPD.MPXM method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
b98401223d pc: acpi: memhp: move MHPD.MRST method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
e8f9db491d pc: acpi: memhp: move MHPD.MSCN method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
12fdadb574 pc: acpi: memhp: move MHPD.MLCK mutex into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
b2344f3e63 pc: acpi: memhp: move MHPD._STA method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
30bd0cf465 pc: acpi: memhp: prepare context in SSDT for moving memhp DSDT code
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:37 +02:00
Haozhong Zhang
c8e6c93857 nvdimm: fix header pointer in nvdimm_build_nfit()
In the current nvdimm_build_nfit(), the pointer 'header' initially equals
to table_data->data + table_data->len. However, the following
g_array_append_vals(table_data, structures->data, structures->len)
may resize and relocate table_data->data[]. Therefore, the usage of 'header'
afterwards may be illegal.

This patch fixes this issue by storing an offset within table_data->data[]
(rather than an address) in 'header'.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:37 +02:00
Igor Mammedov
5530427f0c acpi: extend aml_and() to accept target argument
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
ca3df95df8 acpi: extend aml_or() to accept target argument
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
a23b887281 acpi add aml_dma()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
25c1432ebe acpi: add aml_to_buffer()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
6d5ea945ce acpi: add aml_to_hexstring()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
36de884a13 acpi: extend aml_field() to support LockRule
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
dabad78b0d acpi: add aml_lgreater()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
df241999b6 acpi: add aml_lor()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
0073518dd7 acpi: add aml_sleep()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
67a5c0faa6 acpi: add aml_alias()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
c360639aee acpi: extend aml_shiftright() to accept target argument
it allows to express ShiftRight(A,B,C) syntax

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
f411199de7 acpi: add aml_to_integer()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
7b38ba9cb6 acpi: add aml_call0() helper
it will help to call a method with 0 arguments

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
7059eb4262 acpi: add aml_decrement() and aml_subtract()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
20ca520884 acpi: extend aml_add() to accept target argument
it allows to express following ASL expression:
 Add(arg1, arg2, result)

usecases that do not need to store result
should pass NULL as 3rd arg that would express
 Add(arg1, arg2,)
construct.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
439e2a6e10 acpi: aml: add helper for Opcode Arg2 Arg2 [Dst] AML pattern
Currently AML API doesn't compose terms in form of
following pattern:

   Opcode Arg2 Arg2 [Dst]

but ASL used in piix4/q35 DSDT ACPI tables uses that
form, so for clean conversion of it, AML API should
be able to handle an optional 'Dst' argumet used there.

Since above pattern is used by arithmetic/bit ops,
introduce helper that they could reuse.
It reduces code duplication in existing 5 aml_foo()
functions and also will prevent more duplication
when exiting functions are extended to support
optional 'Dst' argument.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-12-22 18:39:20 +02:00
Igor Mammedov
7e192a383b acpi: add aml_create_qword_field()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
6e1db3f263 acpi: add aml_mutex(), aml_acquire(), aml_release()
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Igor Mammedov
2d3f667dc6 acpi: add aml_lgreater_equal()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
52483d147b acpi: add aml_sizeof
Implement SizeOf term which is used by NVDIMM _DSM method in later patch

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00