It doesn't define any keys, only includes "common".
Which makes it effectively an "en-us" map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-3-kraxel@redhat.com
"common" is the only file using it, so we can just include it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.
Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.
TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().
RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
configure gets the version number from VERSION, and writes it to
config-host.mak. The make dependency for that is missing. Because of
that, a rebuild after a VERSION change may not pick up the change.
Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181214084754.23854-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Adding a new qapi module had some rather tedious repetition to
wire it into Makefile, Makefile.objs, and .gitignore (for example,
see commit bf42508f and its followup b61acdec). For make, add some
indirection by taking advantage of GNU Make string processing to
expand a list of module names into all the required artifacts, so
that future additions of a new module need only touch the list of
module names. And for gitignore, use globs to cover all generated
file names.
The list has to live in Makefile.objs, due to the way that
our unnest-vars macro slirps in that file without remembering
any definition of $(QAPI_MODULES) from Makefile.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20181116200016.2080785-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Difficult to make use of if not installed
Fixes: cd1bfd5ef3 ("seabios: update bios and vgabios binaries")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 153936155938.28040.11513367417790075721.stgit@gimli.home
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.
This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.
The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
Make sure that the docs get correctly regenerated when the
file qemu-deprecated.texi has been changed.
Fixes: 44c67847e3
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f99ce85279178385f204a52236f855c879c29cdc)
If you don't want to compile everything, you configure
config-devices.mak. And then make clean remove it, and make will
create a default one without your configuration. Fix it by not
removing it on clean target. Remove it instead on distclean.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Remove it instead on distclean.
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.
This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will build a coverage report under the current directory in
reports/coverage. At the users option a report can be generated by
directly invoking something like:
make foo/bar/coverage-report.html
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This can be used to remove any stale coverage data before any
particular test run. This is useful for analysing individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>---
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
This commit removes the PYTHON_UTF8 workaround. The problem with setting
LC_ALL= LANG=C LC_CTYPE=en_US.UTF-8
is that the en_US.UTF-8 locale might not be available. In this case
setting above locales results in build errors even though another UTF-8
locale was originally set [1]. The only stable way of fixing the
encoding problem is by specifying the encoding in Python, like the
previous commit does.
[1] https://bugs.gentoo.org/657766
Signed-off-by: Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Message-Id: <20180618175958.29073-3-armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In appears the input keymap for osx was forgotten in the commit that
converted the gtk frontend to keycodemapdb. Add it.
Fixes: 2ec78706 ("ui: convert GTK and SDL1 frontends to keycodemapdb")
CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Message-id: 1528933916-40670-1-git-send-email-keno@juliacomputing.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 9578f8cc3e.
The patch snuck in by accident without having been posted to
qemu-devel. It's entirely redundant: existing target print-% already
serves the purpose.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180504054241.6833-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
-----BEGIN PGP SIGNATURE-----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=oWiH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging
Fixes in syscall numbers,
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
# gpg: Signature made Tue 12 Jun 2018 11:57:18 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user/sparc64: Add inotify_rm_watch and tee syscalls
linux-user/microblaze: Fix typo in accept4 syscall
linux-user/hppa: Fix typo in mknodat syscall
linux-user/alpha: Fix epoll syscalls
qemu-binfmt-conf.sh: ignore the OS/ABI field
linux-user: disable qemu-bridge-helper and socket_scm_helper build
linux-user: Use is_error() to avoid warnings and make the code clearer
linux-user: Export use is_error(), use it to avoid warnings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user targets don't need them, and if we ask to build statically
linked binaries, some static libraries they need are not available.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180605160958.5434-1-laurent@vivier.eu>
Python 2.7 (the minimum Python version we require) provides
collections.OrderedDict on the standard library, so we don't need
to carry our own implementation.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608175252.25110-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To be more accurate on its purpose and make code that looks for a certain
target out of this variable more readable.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds a separate schema file for all job-related definitions that
aren't tied to the block layer.
For a start, move the enums JobType, JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fixes 722cd74964
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180416093719.2543-1-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
SeaBIOS blob which is currently shipped with QEMU
doesn't need acpi-dsdt.aml nor is able to use it
and code that loaded it in QEMU was removed by
(commit 9fb7aaaf4c "pc: drop external DSDT loading")
in 2013.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Available when configure --enable-modules.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306161728.20890-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add audio/ to common-obj-m variable.
Also run both audio and ui variables through unnest-vars.
This avoids sdl.mo (exists in both audio/ and ui/) name clashes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-4-kraxel@redhat.com
Now that gtk support builds as a module, CONFIG_GTK changed from
y to m. Adjust Makefile correspondingly.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 20180307155517.32570-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We used to generate first test and later QGA QAPI code into
qapi-generated/. Commit b93b63f574 moved the test code to tests/.
Commit 54c2e50205 moved the QGA code to qga/qapi-generated/. The
directory has been unused since.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-30-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Our qapi-schema.json is composed of modules connected by include
directives, but the generated code is monolithic all the same: one
qapi-types.h with all the types, one qapi-visit.h with all the
visitors, and so forth. These monolithic headers get included all
over the place. In my "build everything" tree, adding a QAPI type
recompiles about 4800 out of 5100 objects.
We wouldn't write such monolithic headers by hand. It stands to
reason that we shouldn't generate them, either.
Split up generated qapi-types.h to mirror the schema's modular
structure: one header per module. Name the main module's header
qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h.
Mirror the schema's includes in the headers, so that qapi-types.h gets
you everything exactly as before. If you need less, you can include
one or more of the sub-module headers. To be exploited shortly.
Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h,
qmp-commands.c, qapi-event.h, qapi-event.c the same way.
qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic.
The split of qmp-commands.c duplicates static helper function
qmp_marshal_output_str() in qapi-commands-char.c and
qapi-commands-misc.c. This happens when commands returning the same
type occur in multiple modules. Not worth avoiding.
Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and
qmp-commands.[ch] to qapi-commands.[ch], name the shards that way
already, to reduce churn. This requires temporary hacks in
commands.py and events.py. Similarly, c_name() must temporarily
be taught to munge '/' in common.py. They'll go away with the rename.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: declare a dummy variable in each .c file, to shut up OSX
toolchain warnings about empty .o files, including hacking c_name()]
Signed-off-by: Eric Blake <eblake@redhat.com>
Linking code from multiple separate QAPI schemata into the same
program is possible, but involves some weirdness around built-in
types:
* We generate code for built-in types into .c only with option
--builtins. The user is responsible for generating code for exactly
one QAPI schema per program with --builtins.
* We generate code for built-in types into .h regardless of
--builtins, but guarded by #ifndef QAPI_VISIT_BUILTIN. Because all
copies of this code are exactly the same, including any combination
of these headers works.
Replace this contraption by something more conventional: generate code
for built-in types into their very own files: qapi-builtin-types.c,
qapi-builtin-visit.c, qapi-builtin-types.h, qapi-builtin-visit.h, but
only with --builtins. Obey --output-dir, but ignore --prefix for
them.
Make qapi-types.h include qapi-builtin-types.h. With multiple
schemata you now have multiple qapi-types.[ch], but only one
qapi-builtin-types.[ch]. Same for qapi-visit.[ch] and
qapi-builtin-visit.[ch].
Bonus: if all you need is built-in stuff, you can include a much
smaller header. To be exploited shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-21-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: fix octal constant for python 3]
Signed-off-by: Eric Blake <eblake@redhat.com>
All generated .c are named like their .h, except for qmp-marshal.c and
qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely
matches generated test-qmp-commands.h.
Get rid of this unnecessary complication.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever qapi-schema.json changes, we run six programs eleven times to
update eleven files. Similar for qga/qapi-schema.json. This is
silly. Replace the six programs by a single program that spits out
all eleven files.
The programs become modules in new Python package qapi, along with the
helper library. This requires moving them to scripts/qapi/. While
moving them, consistently drop executable mode bits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: move change to one-line 'blurb' earlier in series, mention mode
bit change as intentional, update qapi-code-gen.txt to match actual
generated events.c file]
Signed-off-by: Eric Blake <eblake@redhat.com>
sed's -E option may not be supported by older distros. As there's no
point using sed here at all, use just shell mechanisms to establish the
variable values, starting from the stem instead of the full target.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The make rules for building QEMU are mostly silent by default. They can
be made verbose by setting the variable V=1. The default state does not
however correspond to a V=0 setting - $(V) must be undefined / empty to
get the default quiet build.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180123164718.12714-3-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 42a77f1ce4.
The primary intention of this change was to silence messages
like
make[1]: '/home/berrange/src/virt/qemu/capstone/libcapstone.a' is up to date.
which we get when calling make recursively with explicit
targets.
The problem is that this change affected every make target,
not merely the targets that triggered these "is up to date"
messages. As a result any targets that were not invoking
commands via "$(call quiet-command ...)" suddenly become
silent. This is particularly bad for "make install" which
now appears todo nothing.
Rather than go through every make rule and try to identify
places where we now need to explicitly print a message to
show work taking place, just revert the change.
To address the original problem of silencing "is up to date"
messages, we simply add --quiet to the SUBDIR_MAKEVARS
variable, so it only affects us on recursive make calls.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180123164718.12714-2-berrange@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python2 did not validate locale correctness when reading input data, so
would happily read UTF-8 data in non-UTF-8 locales. Python3 is strict so
if you try to read UTF-8 data in the C locale, it will raise an error
for any UTF-8 bytes that aren't representable in 7-bit ascii encoding.
e.g.
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 54: ordinal not in range(128)
Traceback (most recent call last):
File "/tmp/qemu-test/src/scripts/qapi-commands.py", line 317, in <module>
schema = QAPISchema(input_file)
File "/tmp/qemu-test/src/scripts/qapi.py", line 1468, in __init__
parser = QAPISchemaParser(open(fname, 'r'))
File "/tmp/qemu-test/src/scripts/qapi.py", line 301, in __init__
previously_included)
File "/tmp/qemu-test/src/scripts/qapi.py", line 348, in _include
exprs_include = QAPISchemaParser(fobj, previously_included, info)
File "/tmp/qemu-test/src/scripts/qapi.py", line 271, in __init__
self.src = fp.read()
File "/usr/lib64/python3.5/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
More background on this can be seen in
https://www.python.org/dev/peps/pep-0538/
Many distros support a new C.UTF-8 locale that is like the C locale,
but with UTF-8 instead of 7-bit ASCII. That is not entirely portable
though. This patch thus sets the LANG to "C", but overrides LC_CTYPE
to be en_US.UTF-8 locale. This gets us pretty close to C.UTF-8, but
in a way that should be portable to everywhere QEMU builds.
This patch only forces UTF-8 for QAPI scripts, since that is the one
showing the immediate error under Python3 with C locale, but potentially
we ought to force this for all python scripts used in the build process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-9-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The qcode-to-linux keymaps was accidentally added in the wrong place
by
commit de80d78594
Author: Owen Smith <owen.smith@citrix.com>
Date: Fri Nov 3 11:56:28 2017 +0000
ui: generate qcode to linux mappings
breaking the alphabetical ordering of keymaps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180117164118.8510-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode table with automatically
generated tables.
Missing entries in qcode_to_keycode now fixed:
- Q_KEY_CODE_KP_COMMA -> 0x2d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The x_keycode_to_pc_keycode and evdev_keycode_to_pc_keycode
tables are replaced with automatically generated tables.
In addition the X11 heuristics are improved to detect running
on XQuartz and XWin X11 servers, to activate the correct OS-X
and Win32 keycode maps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit introduces a vhost-user-blk backend device, it uses UNIX
domain socket to communicate with QEMU. The vhost-user-blk sample
application should be used with QEMU vhost-user-blk-pci device.
To use it, complie with:
make vhost-user-blk
and start like this:
vhost-user-blk -b /dev/sdb -s /path/vhost.socket
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific).
Use --quiet to silence make 'is up to date' message.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180104160523.22995-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These targets don't need a full build of git submodules.
(See b8e535ae8a and eaa2ddbb76).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For some systems (i.e. FreeBSD) the default 'make' is not compatible with the
GNU extensions used by QEMU makefiles.
Calling the GNU make (gmake) works, however the help displayed refers to the
host 'make' and copy/paste leads to lot of unobvious errors:
$ gmake check-help
[...]
make check Run all tests
$ make check
make: "Makefile" line 28: Missing dependency operator
make: "Makefile" line 37: Need an operator
make: "Makefile" line 41: warning: duplicate script for target "git-submodule-update" ignored
make: "rules.mak" line 70: warning: duplicate script for target "%.o" ignored
make: Unknown modifier ' '
make: Unclosed substitution for eval modules (= missing)
make: "tests/Makefile.include" line 24: Variable/Value missing from "export"
make: "tests/" line 1: warning: Zero byte read from file, skipping rest of line.
make: "tests/" line 1: Need an operator
make: "Makefile" line 660: warning: duplicate script for target "ifneq" ignored
make: "Makefile" line 78: warning: using previous script for "ifneq" defined here
make: Fatal errors encountered -- cannot continue
Using the $(MAKE) variable, the help displayed is consistent with the 'make'
program used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use keycodedb to generate a qcode to linux mapping
Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Developers sometimes mistakenly run 'make test' instead of 'make check'.
'make test' triggers the ancient, unmaintained tcg unit tests in
tests/tcg/Makefile which have long since ceased compiling.
Even if someone fixes the TCG tests, it makes little sense to put
them in a 'make test' target, rather they should be 'make check-tcg',
possibly wired up as a dependency of 'make check'.
In the meantime, this patch disarms the 'make test' trap by simply
deleting it so users get an immediate error. This should be enough
for them to remember to type 'make check' instead (or 'make help'
to learn). It also deletes 'make speed' which is another route
into the tcg tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-id: 20171121142538.22072-1-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using obscure black magic introduced in eaa2ddbb76 :)
In an out-of-tree directory, running "../configure && make help" will generate
some required files (.mak), then clone some submodules, compile at least
the capstone submodule, generate QMP and Trace files, and finally display
the help.
On an outdated computer (Sun Blade workstation), running "make help" took
more than 5h :) With this patch it took roughly 37min.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171108032052.20029-1-f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross compiling QEMU for Windows we need to specify the cross
version of ranlib to avoid build errors when building capstone. This
patch ensures we use the same cross prefix on ranlib as other toolchain
components.
- Fedora23 mingw
- RHEL-7.2 with mingw packages from epel:
LINK qemu-img.exe
build-win64/capstone/capstone.lib: error adding symbols: Archive has no
index; run ranlib to add one
collect2: error: ld returned 1 exit status
$ x86_64-w64-mingw32-ar --version
GNU ar (GNU Binutils) 2.25
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e457d4e906dceea4de6c3431813a06b137c1ab9c.1510103351.git.alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Makefile attempts to optimize the handling of submodules by using MAKELEVEL
to only check the submodule status when running from the top level make
invokation. This causes problems for people who are using a makefile of their
own to in turn invoke QEMU's makefile, as MAKELEVEL is already set to 1 (or
more) when QEMU's makefile runs.
This optimization should not really be needed, since the git-submodule.sh
script is already used to detect if a submodule update is required. This by
removing the MAKELEVEL check, we at most add an extra 'git-submodule.sh status'
call to each make level, the overhead of which is lost in noise of building
QEMU.
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some people building QEMU use VPATH builds where the source directory is on a
read-only volume. In such a case 'scripts/git-submodules.sh update' will always
fail and users are required to run it manually themselves on their original
writable source directory.
While this is already supported, it is nice to give users a command line flag
to configure to permanently disable automatic submodule updates, as it means
they won't get hard to diagnose failures from git-submodules.sh at an arbitrary
later date.
This patch thus introduces a flag '--disable-git-update' which will prevent
'make' from ever running 'scripts/git-submodules.sh update'. It will still run
the 'status' command to determine if a submodule update is needed, but when it
does this it'll simply stop and print a message instructing the developer what
todo. eg
$ ./configure --target-list=x86_64-softmmu --disable-git-update
...snip...
$ make
GEN config-host.h
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN module_block.h
GIT submodule checkout is out of date. Please run
scripts/git-submodule.sh update ui/keycodemapdb
from the source directory checkout /home/berrange/src/virt/qemu
make: *** [Makefile:31: git-submodule-update] Error 1
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some users can't run a bare 'git' command, due to need for a transparent
proxying solution such as 'tsocks'. This adds an argument to configure to
let users specify such a thing:
./configure --with-git="tsocks git"
The submodule script is also updated to give the user a hint about using this
flag, if we fail to checkout modules.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Do not require the submodule, but use it if present. Allow the
command-line to override system or git submodule either way.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This was introduced by:
commit aef45d51d1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 29 11:11:56 2017 +0100
build: automatically handle GIT submodule checkout for dtc
On my system, I see the following with a fresh clone:
% ./configure --disable-gtk --target-list=aarch64-softmmu
% make -j8
GEN aarch64-softmmu/config-devices.mak.tmp
GEN config-host.h
mkdir -p dtc/libfdt
GIT ui/keycodemapdb dtc
mkdir -p dtc/tests
GEN qemu-options.def
[snip]
GEN migration/trace.h
make: *** [git-submodule-update] Error 1
make: *** Waiting for unfinished jobs....
Upon closer inspection, the root cause of the error is:
% git submodule update --init ui/keycodemapdb dtc
fatal: destination path 'dtc' already exists and is not an empty directory.
Clone of 'git://git.qemu-project.org/dtc.git' into submodule path 'dtc' failed
This patch fixes this race condition by forcing the 'dtc/%' rule which caused
'dtc' to be non-empty to wait on '.git-submodule-status'.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1508352023-28591-1-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add vertex shader which flips the texture upside down while blitting it.
Add argument to qemu_gl_run_texture_blit() to enable flipping.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-4-kraxel@redhat.com
With the upcoming dmabuf support in qemu there will be more users of the
shaders than just console-gl.c. So rename ConsoleGLState to
QemuGLShader, rename some functions too, move code from console-gl.c to
shaders.c.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-3-kraxel@redhat.com
qemu-keymap generates qemu reverse keymaps from xkb keymaps,
which can be used with the qemu "-k" command line switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171005153330.19210-2-kraxel@redhat.com
Replace the number_to_qcode, qcode_to_number and linux_to_qcode
tables with automatically generated tables.
Missing entries in linux_to_qcode now fixed:
KEY_LINEFEED -> Q_KEY_CODE_LF
KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS
KEY_COMPOSE -> Q_KEY_CODE_COMPOSE
KEY_AGAIN -> Q_KEY_CODE_AGAIN
KEY_PROPS -> Q_KEY_CODE_PROPS
KEY_UNDO -> Q_KEY_CODE_UNDO
KEY_FRONT -> Q_KEY_CODE_FRONT
KEY_COPY -> Q_KEY_CODE_COPY
KEY_OPEN -> Q_KEY_CODE_OPEN
KEY_PASTE -> Q_KEY_CODE_PASTE
KEY_CUT -> Q_KEY_CODE_CUT
KEY_HELP -> Q_KEY_CODE_HELP
KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT
In addition, some fixes:
- KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of
KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes
sets, while KEY_PLAYCD only appears in AT set1, so the former is
a more useful mapping.
Missing entries in qcode_to_number now fixed:
Q_KEY_CODE_AGAIN -> 0x85
Q_KEY_CODE_PROPS -> 0x86
Q_KEY_CODE_UNDO -> 0x87
Q_KEY_CODE_FRONT -> 0x8c
Q_KEY_CODE_COPY -> 0xf8
Q_KEY_CODE_OPEN -> 0x64
Q_KEY_CODE_PASTE -> 0x65
Q_KEY_CODE_CUT -> 0xbc
Q_KEY_CODE_LF -> 0x5b
Q_KEY_CODE_HELP -> 0xf5
Q_KEY_CODE_COMPOSE -> 0xdd
Q_KEY_CODE_KP_EQUALS -> 0x59
Q_KEY_CODE_MEDIASELECT -> 0xed
In addition, some fixes:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xdd) and is now mapped to 0x9e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined
scan code in AT set 1, it is now mapped to 0x54 (sysrq)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.
It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com
[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.
This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com
[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[fixup] Makefile dep
And actually link to it from vhost-user-bridge.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Block driver documentation is available in qemu-doc.html. It would be
convenient to have documentation for formats, protocols, and filter
drivers in a man page.
Extract the relevant part of qemu-doc.html into a new file called
docs/qemu-block-drivers.texi. This file can also be built as a
stand-alone document (man, html, etc).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Proper support of persistent reservation for multipath devices requires
communication with the multipath daemon, so that the reservation is
registered and applied when a path comes up. The device mapper
utilities provide a library to do so; this patch makes qemu-pr-helper.c
detect multipath devices and, when one is found, delegate the operation
to libmpathpersist.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.
The next patch will also correct the usage of persistent reservations
with multipath devices.
It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices. For now, however, only SCSI is
supported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using two libraries (libqemuutil.a and libqemustub.a) would sometimes
result in circular dependencies. To avoid these issues let's just
combine both into a single library that functions as both.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Sadly, we don't have a TPM maintainer, not even a MAINTAINERS entry.
Create one, and mark it orphaned.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-8-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:
$ make check-help V=1
cc -nostdlib -o check-help.mo
cc: fatal error: no input files
compilation terminated.
rules.mak:115: recipe for target 'check-help.mo' failed
make: *** [check-help.mo] Error 1
Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
It got moved in qga/main.c from commit 2870dc3456.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.
This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
added commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's already possible to do a network boot of an s390x guest with an
external netboot image based on a Linux installation, but it would
be much more convenient if the s390-ccw firmware supported network
booting right out of the box, without the need to assemble such an
external image first.
This is an s390-netboot.img that can be used for network booting.
You can download a combined kernel + initrd image via TFTP
by starting QEMU for example with:
qemu-system-s390x ... -device virtio-net,netdev=n1,bootindex=1 \
-netdev user,id=n1,tftp=/path/to/tftp,bootfile=kernel.img
Note that this version does not support downloading via config
files (i.e. pxelinux config files or .INS config files) yet. This
will be added later.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This commit introduces a vhost-user-scsi backend sample application. It
must be linked with libiscsi and libvhost-user.
To use it, compile with:
$ make vhost-user-scsi
And run as follows:
$ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/
$ qemu-system-x86_64 --enable-kvm -m 512 \
-object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \
-numa node,memdev=mem \
-chardev socket,id=vhost-user-scsi,path=vus.sock \
-device vhost-user-scsi-pci,chardev=vhost-user-scsi \
The application is currently limited at one LUN only and it processes
requests synchronously (therefore only achieving QD1). The purpose of
the code is to show how a backend can be implemented and to test the
vhost-user-scsi Qemu implementation.
If a different instance of this vhost-user-scsi application is executed
at a remote host, a VM can be live migrated to such a host.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
This is for the future interoperability & management guide. It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When doing a "make -j10" in the vanilla QEMU source tree (without
running "configure" first), the Makefile currently generates two
files already, qemu-version.h and qemu-options.def. This should not
happen, so let's only build the generated files if config-host.mak
is available (i.e. "configure" has been run already).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1496926799-13040-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently all trace.o are linked into qemu-system, qemu-img,
qemu-nbd, qemu-io etc., even the corresponding components
are not included.
Put all trace.o into libqemuutil.a that the linker would only pull in .o
files containing symbols that are actually referenced by the
program.
Signed-off -by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When qapi2texi.py changes, we regenerate everything QAPI. Screwed up
in commit 56e8bdd.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490015515-25851-2-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so
that the Xen backends are only built for targets that support Xen.
Set CONFIG_XEN in the toplevel Makefile to ensure that files that are
built only once pick up Xen support properly.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: pbonzini@redhat.com
CC: peter.maydell@linaro.org
CC: rth@twiddle.net
CC: stefanha@redhat.com
Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its
user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches
qemu-ga-ref.texi.
Build the intermediate .texi next to the sources and the final output
in docs/ instead of dumping them into the build root.
Fix version.texi dependencies so that only the targets that actually
need it depend on it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
The build rules for trace files have a dependancy on $(tracetool-y).
This variable populated in the trace/Makefile.objs file and thus its
definition gets pulled into the top level makefile. This happens too
late in the process though, so by the time $(tracetool-y) is defined,
make has already evaluated $(tracetool-y) in the dependancies and
found it to be empty. The result is that when the tracetool source
is changed, the generated files are not rebuilt. The solution is to
define the variable in the top level makefile too
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20170315123421.28815-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Files should not be created in the build dir during the
'make install' phase. List 'trace-events-all' as a
generated file so that it gets created upfront during
build.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170228122901.24520-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only functional difference between the GENERATED_HEADERS
and GENERATED_SOURCES variables is that 'Makefile' has a
dependancy on GENERATED_HEADERS, causing generated header files
to be created immediatey at the start of the build process.
There is no reason why this early creation should be restricted
to the .h files, and not include .c files too. Merge both of
the variables into a single GENERATED_FILES variable to make
it clear it is for any type of generated file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170228122901.24520-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unfortunately some older versions of makeinfo don't correctly
handle the -D command line option and fail to set the variable.
This then causes them to complain
docs/qemu-ga-ref.texi:41: warning: undefined flag: VERSION
Work around this by doing as the autotools do, and writing
the information into a version.texi file which we then
include from the .texi files that need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487357968-31000-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By commit 67a1de0d, When we perform 'git pull && make && sudo make install',
In 'make' stage a qemu-version.h.tmp will be generated. If the content of
qemu-version.h.tmp and qemu-version.h aren't consistent, The qemu-version.h.tmp
will be renamed to qemu-version.h. Because of the target FORCE, The same action
will be do again in 'make install' stage.
In 'make install' stage, If there is no qemu-version.h.tmp exists and we run
'make install' with sudo, The owner and group of new qemu-version.h.tmp will be
privileged user/group. When we run 'make' next time, qemu-version.h.tmp can't
be overwritten because of permission issue.
This patch removed qemu-version.h.tmp after build to fix this issue.
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20170215024030.23895-1-lma@suse.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We install this file to data dir but since 0ab8ed18 it's no longer
required by any objects during "make". List it explicitly as a depended
target of install and fix the broken "make install" command.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170204143245.15974-1-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will help to split char.c in several units without having to
reference them all everywhere. This is useful in particular for tests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move makeinfo flags from MAKEINFO to MAKEINFOFLAGS. Fix the call of
quiet-command for target qemu-ga-qapi.texi. Both messed up in commit
56e8bdd.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1484816804-12598-1-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When qemu-doc.txt was added as a new output format in
commit f8bab10b4c, it was not added to either the
list of files to remove in distclean or to the dependency
line that forces qemu-options.texi to be built before
attempting to build qemu-doc.*.
In particular, the missing dependency meant that on
some platforms (notably OSX hosts) we would try to
build qemu-doc.txt before qemu-options.texi had been
fully written out, and then makeinfo would complain
about missing cross-reference targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1485266538-10119-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Generate and install the man, txt and html versions of QAPI
documentation (generate and install qemu-doc.txt too).
Add it also to optional pdf/info targets.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Build plain text documentation, and install it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-21-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The recipe for making a man page from .texi is duplicated several
times over. Capture it in suitable pattern rules instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-20-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no clear reason to have rules to generate dvi format
documentation, pdf is generally better supported nowadays.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-19-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Splitting the info files doesn't bring much benefits these days.
This fixes also untracked generated info files from git ignore.
Let's use MAKEINFOFLAGS for common flags, --number-sections is already
the default anyway, so adding it doesn't change the info output.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-18-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Moving the remaining bits of documentation to the json
file (text improvements is not the objective of this patch)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYVFkHAAoJECgfDbjSjVRpdc0H/1JMgQn0/J6vjKfeRY7720y8
/Bihf4gjKN2bPtu6pTGY1KQBvK76ShyvZZBFCa5bf8a4V9HP4BgSQ8mQ7ZUURzJJ
OslYbSzK1R2LiWJ40e9xdFOoKWKB3lK1lBF/Xb8QPZPoJ0D50Fo2xpymt4hZFdkF
oSnXxHmYoKMsMmmqJZd3aaqyffFLYGmcm1dbJOxninwu/nBzOBY2SQmmaaacSoGn
3D5988i6OcD1qbavfk4rNCQV4avJA+H7c/FmXH3WarPE8M9/jgnAaUDdknFicUA8
hGwMsLrO/7sMnMYtSQIxWg743LhrAm93HCr2u/TgLzhYbPydmLCpup5eAWj+jvo=
=nN2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Dec 2016 21:13:43 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: avoid using guest_notifier_mask in vhost-user mode
pci: fix error message for express slots
i386: amd_iommu: fix MMIO register count and access
tests/vhost-user-bridge: use contrib/libvhost-user
contrib: add libvhost-user
tests/vhost-user-bridge: do not accept more than one connection
tests/vhost-user-bridge: indicate peer disconnected
tests/vhost-user-bridge: remove unnecessary dispatcher_remove
tests/vhost-user-bridge: remove false comment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libtool support was removed in commit e999ee4434, there is a few
left-over.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161108070513.30274-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a library to help implementing vhost-user backend (or slave).
Dealing with vhost-user as an application developer isn't so easy: you
have all the trouble with any protocol: validation, unix ancillary data,
shared memory, eventfd, logging, and on top of that you need to deal
with virtio queues, if possible efficiently.
qemu test has a nice vhost-user testing application vhost-user-bridge,
which implements most of vhost-user, and virtio.c which implements
virtqueues manipulation. Based on these two, I tried to make a simple
library, reusable for tests or development of new vhost-user scenarios.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Felipe: set used_idx copy on SET_VRING_ADDR and update shadow avail idx
on SET_VRING_BASE]
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The NSIS based installer currently does not install qemu-ga.
It installs the executables and other files for the QEMU system emulation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is the initial image of skiboot 5.3.7 (commit 762d0082) for
the PowerPC PowerNV (Non-Virtualized) platform. Built from
submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the generated-events.[ch] files contain the
event dstates, constants and TraceEvent structs, while the
generated-tracers.[ch] files contain the actual trace
probe logic. With the removal of usage of the event enums
from the API there is no longer any compelling reason for
the separation between these files. The generated-events.h
content is only ever needed from the generated-tracers.[ch]
files.
The enums/constants/structs from generated-events.[ch] are
thus moved into the generated-tracers.[ch], so that there
is one less file to be generated.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Merge what is left of qemu-tech into the main manual as an appendix.
Ultimately we should have a new internals manual built from docs/, and
then the "Translator Internals" parts of qemu-tech could move to docs/
as well. The bits on limitation and features of CPU emulation should
remain in qemu-doc.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
Extend the current module interface to allow for block drivers to be
loaded dynamically on request. The only block drivers that can be
converted into modules are the drivers that don't perform any init
operation except for registering themselves.
In addition, only the protocol drivers are being modularized, as they
are the only ones which see significant performance benefits. The format
drivers do not generally link to external libraries, so modularizing
them is of no benefit from a performance perspective.
All the necessary module information is located in a new structure found
in module_block.h
This spoils the purpose of 5505e8b76f (block/dmg: make it modular).
Before this patch, if module build is enabled, block-dmg.so is linked to
libbz2, whereas the main binary is not. In downstream, theoretically, it
means only the qemu-block-extra package depends on libbz2, while the
main QEMU package needn't to. With this patch, we (temporarily) change
the case so that the main QEMU depends on libbz2 again.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-4-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Do a signed comparison against the length of
block_driver_modules[], so it will not cause a compile error when
empty]
Signed-off-by: Max Reitz <mreitz@redhat.com>
To simplify the addition of new block modules, add a script that generates
module_block.h automatically from the modules' source code.
This script assumes that the QEMU coding style rules are followed.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-3-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Since bd6092e Replace qmp-commands.hx by docs/qmp-commands.txt
make install fails if building out of source-tree.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1474362094-2293-1-git-send-email-riku.voipio@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only remaining function of qmp-commands.hx is to let us generate
qmp-commands.txt from it. Replace qmp-commands.hx by qmp-commands.txt.
We intend to move the documentation into the QAPI schema and generate
qapi-commands.txt from it, but not right now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-19-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Stop using the so-called 'middle' mode. Instead, use qmp_find_command()
from generated qapi commands registry. Update and fix the documentation
too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When calling make with a CFLAGS=.. argument, the -g/-O filter is not
applied, which may result with build failure with ASAN for example. It
could be solved with an 'override' directive on CFLAGS, but that would
actually prevent setting different CFLAGS manually.
Instead, filter the CFLAGS argument from the top-level Makefile (so
you could still call make with a different CFLAGS argument on a
rom/Makefile manually)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160805082421.21994-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This optionrom is based on linuxboot.S.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com>
[Add -fno-toplevel-reorder, support clang without -m16. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The --quiet argument is not available on all operating systems. Use -s
instead to match the rest of the Makefile uses. This fixes a non-fatal
error seen on FreeBSD.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Sean Bruno <sbruno@freebsd.org>
Message-Id: <20160614180734.8782-1-sbruno@freebsd.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit adds a fast variant of SeaBIOS called 'bios-fast.bin'.
It's designed to be the fastest (also the smallest, but that's not the
main aim) SeaBIOS that is just enough to boot a Linux kernel using the
-kernel option on i686 and x86_64.
This commit does not modify the -kernel option to use this. You have
to specify it by doing something like this:
-kernel vmlinuz -bios bios-fast.bin
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
... so configure re-runs on pc-bios updates such as new pxe roms.
Needed because configure symlinks the prebuilt roms from src
into build tree.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The command will work this way:
qemu-img --trace "qcow2*" create -f qcow2 1.img 64G
[Quote "qcow2*" to protect against shell globbing as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-8-git-send-email-den@openvz.org
Suggested by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Please note, trace_init_backends() must be called in the final process,
i.e. after daemonization. This is necessary to keep tracing thread in
the proper process.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-6-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This text will be included to qemu-nbd/qemu-img mans in the next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-3-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
"ctags" produces a file named "tags", not "ctags". It doesn't look
reasonable to use phony target name as a file name to remove. Just use
exact file names to remove in "ctags" and "TAGS" target receipts.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1465495115-24665-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, if not specified in "./configure", QEMU_PKGVERSION will be
empty. Write a rule in Makefile to generate a value from "git describe"
combined with a possible git tree cleanness suffix, and write into a new
header.
$ cat qemu-version.h
#define QEMU_PKGVERSION "-v2.6.0-557-gd6550e9-dirty"
Include the header in .c files where the macro is referenced. It's not
necessary to include it in all files, otherwise each time the content of
the file changes, all sources have to be recompiled.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464774261-648-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that the various documentation and C code files are rebuilt
whenever there is a change in the script that splits them out of
.hx files.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that config-devices.mak is rebuilt whenever
there is a change in the scripts that generates it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The file is only included from the top Makefile. Rename it to reflect
this more obviously.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464747811-26917-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds a group of make targets to run docker tests, all are available
in source tree without running ./configure.
The usage is shown with "make docker".
Besides the fixed ones, dynamic targets for building each image and
running each test in each image are generated automatically by make,
scanning $(SRC_PATH)/tests/docker/ files with specific patterns.
Alternative to manually list particular targets (docker-TEST@IMAGE)
set, you can control which tests/images to run by filtering variables,
TESTS= and IMAGES=, which are expressed in Makefile pattern syntax,
"foo% %bar ...". For example:
$ make docker-test IMAGES="ubuntu fedora"
Unfortunately, it's impossible to propagate "-j $JOBS" into make in
containers, however since each combination is made a first class target
in the top Makefile, "make -j$N docker-test" still parallels the tests
coarsely.
Still, $J is made a magic variable to let all make invocations in
containers to use -j$J.
Instead of providing a live version of the source tree to the docker
container we snapshot it with git-archive. This ensures the tree is in a
pristine state for whatever operations the container is going to run on
them.
Uncommitted changes known to files known by the git index will be
included in the snapshot if there are any.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-5-git-send-email-famz@redhat.com
When config-host.mak is not found it is safe to assume SRC_PATH is ".".
So, it is okay to move inclusion of ruls.mak out of the ifeq condition.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-4-git-send-email-famz@redhat.com
Our dependency mechanism works like this:
* on first build there is neither a .o nor a .d
* we create the .d as a side effect of creating the .o
* for rebuilds we know when we need to update the .o,
which also updates the .d
This system requires that you're never in a situation where there is
a .o file but no .d (because then we will never realise we need to
build the .d, and we will not have the dependency information about
when to rebuild the .o).
This is working fine for our object files, but we also try to use it
for $TARGET/config-devices.mak (where the dependency file is
in $TARGET-config-devices.mak.d). Unfortunately "make clean" doesn't
remove config-devices.mak, which means that it puts us in the
forbidden situation of "object file exists but not its .d file".
This in turn means that we will fail to notice when we need to rebuild:
mkdir build/depbug
(cd build/depbug && '../../configure')
make -C build/depbug -j8
make -C build/depbug clean
echo "CONFIG_CANARY = y" >> default-configs/arm-softmmu.mak
make -C build/depbug
grep CANARY build/depbug/aarch64-softmmu/config-devices.mak
The CANARY token should show up in config-devices.mak but does not.
Fix this bug by making "make clean" delete the config-devices.mak files.
config-all-devices.mak doesn't have the same problem since it has
no .d file, but delete it too, since it is created by "make" and
logically should be removed by "make clean".
(Note that it is important not to remove config-devices.mak until
after we have recursively run 'make clean' in the subdirectories.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1463484451-22979-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The file was used only by older machine-types, and it is not
needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This converts the NBD block driver client to use the QIOChannelSocket
class for initial connection setup. The NbdClientSession struct has
two pointers, one to the master QIOChannelSocket providing the raw
data channel, and one to a QIOChannel which is the current channel
used for I/O. Initially the two point to the same object, but when
TLS support is added, they will point to different objects.
The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to
ensure the QIOChannel object classes are registered. The qemu-nbd
tool already did this.
In this initial conversion though, all I/O is still actually done
using the raw POSIX sockets APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is an s390 boot rom which was used in s390-virtio machine.
but since commit 3538fb6f89
"s390x: remove s390-virtio machine", this file isn't used.
The only place it is referenced in the code is an unused
define ZIPL_FILENAME. There's also comment in hw/s390/ipl.c
which I'm modifying too, to refer to s390-ccw.img instead.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
And rename v9fs_marshal to v9fs_iov_marshal, v9fs_unmarshal to
v9fs_iov_unmarshal.
The rationale behind this change is that, this marshalling interface is
used both by virtio and proxy helper. Renaming files and functions to
reflect the true nature of this interface.
Xen transport is going to have its own marshalling interface.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Break out some generic functions for marshaling 9p state. Pure code
motion plus minor fixes for build system.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The rebuild of qapi-types.c/h is not correctly triggered
when qapi/crypto.json is changed because it was missing
from the list of files in the qapi-modules variable.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Start the new generic I/O channel framework by defining a
QIOChannel abstract base class. This is designed to feel
similar to GLib's GIOChannel, but with the addition of
support for using iovecs, qemu error reporting, file
descriptor passing, coroutine integration and use of
the QOM framework for easier sub-classing.
The intention is that anywhere in QEMU that almost
anywhere that deals with sockets will use this new I/O
infrastructure, so that it becomes trivial to then layer
in support for TLS encryption. This will at least include
the VNC server, char device backend and migration code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
ab59e3e introduced a fix for `make install` on w32 that involved
filtering out qemu-ga from $TOOLS install recipe so that we could
append $(EXESUF) to it before attempting to install the binary
via install-prog function.
install-prog takes a list of binaries to install to a particular
directory. If the list is empty it breaks. We guard against this
by ensuring $TOOLS is not empty prior to calling.
However, ab59e3e introduces extra filtering after this check which
can still result on us attempting to call install-prog with an
empty list of binaries. In particular, this occurs if we
build with the --disable-tools configure option, which results
in qemu-ga being the only member of $TOOLS.
Fix this by doing a simple s/qemu-ga/qemu-ga$(EXESUF)/ pass through
$TOOLS instead of filtering out qemu-ga to handle it seperately.
Reported-by: Steve Ellcey <sellcey@imgtec.com>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
fafcaf1 added a 'qemu-ga' install target on w32, which can be used
in place of the existing qemu-ga.exe target to also handle dealing
with other components such as DLLs for VSS/fsfreeze and generating
an MSI package if appropriate configure options are present.
As part of that, qemu-ga$(EXESUF) was removed from $TOOLS in favor
of this new qemu-ga target.
The install rule however relies on a direct mapping of the $TOOLS
entry to the actual resulting binary. In the case of w32, qemu-ga
is not identical to qemu-ga$(EXESUF), and the install recipe fails
to find the 'qemu-ga' binary.
Fix this by essentially remapping 'qemu-ga' back to 'qemu-ga.exe'
in the install recipe.
This raises the question of whether or not qemu-ga should continue
to live in TOOLS as opposed to its own special target, but as a
late fix for a regression in 2.5 this commit should be safer, since
we rely on qemu-ga's presence in $TOOLS in several places throughout
Makefile.
Reported-by: Stefan Weil <sw@weilnetz.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When using ivshmem devices, notifications between guests can be sent as
interrupts using a ivshmem-server (typical use described in documentation).
The client is provided as a debug tool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[fix a valgrind warning, option and server_close() segvs, extra server
headers includes, getopt() return type, out-of-tree build, use qemu
event_notifier instead of eventfd, fix x86/osx warnings - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Currently POSIX builds rely on 'qemu-ga' target to do qga-only
distributable build. On w32, as with most standalone binary targets,
we rely on 'qemu-ga.exe' target.
Unlike with POSIX, qemu-ga for w32 has a number of related targets
such as VSS DLL and MSI package. We can do the full distributable
qga-only build on w32 with:
make qemu-ga.exe
or:
make msi
To make that work, we tie VSS dependencies onto qemu-ga.exe.
However, in reality the DLL isn't part of the binary, so we use a
filter to pull them out of the LINK recipe, which attempts to link
against prereqs for binary targets. Additionally, it could be argued
that VSS is a separate distributable, and shouldn't be implied by
qemu-ga.exe binary target.
To avoid this, we can tie the VSS dependencies only to the 'msi'
target, but that would make it impossible to do a qga-only build of
the w32 distributable without building the 'msi' package, which was
supported in the past.
An alternative approach is to add a new target to build the whole
distributable. w32 allows us to use the same build target we use
on POSIX, 'qemu-ga', since the current binary-only target on w32
is 'qemu-ga.exe'.
To further simplify the build, we also make 'qemu-ga' build the MSI
package if the appropriate ./configure options are set, making the
full qga-only build the same on both POSIX and w32: `make qemu-ga`
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Steve Ellcey / Leon Alrae reported that QEMU fails to build when
the VPATH directory is outside of the GIT tree, and the system
emulators & tools build is disabled. eg
cd ..
mkdir build
cd build
../qemu/configure --disable-system --disable-tools
make
(...)
make[1]: *** No rule to make target `../qom/object.o', needed by `qemu-aarch64'. Stop.
make: *** [subdir-aarch64-linux-user] Error 2
The problem is due to the fact that some sub directory deps
were listed against SOFTMMU_SUBDIR_RULES instead of SUBDIR_RULES,
so were only processed for system emulators, not user emalutors.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442570495-22029-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The uninstall keys include an option key "DisplayVersion" which we set
now. By default the version value is read from file VERSION, but it is
also possible to pass VERSION=#.#.# to make.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.
Use the library if found during configure or if --enable-smartcard.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
qapi/introspect.json defines the introspection schema. It's designed
for QMP introspection, but should do for similar uses, such as QGA.
The introspection schema does not reflect all the rules and
restrictions that apply to QAPI schemata. A valid QAPI schema has an
introspection value conforming to the introspection schema, but the
converse is not true.
Introspection lowers away a number of schema details, and makes
implicit things explicit:
* The built-in types are declared with their JSON type.
All integer types are mapped to 'int', because how many bits we use
internally is an implementation detail. It could be pressed into
external interface service as very approximate range information,
but that's a bad idea. If we need range information, we better do
it properly.
* Implicit type definitions are made explicit, and given
auto-generated names:
- Array types, named by appending "List" to the name of their
element type, like in generated C.
- The enumeration types implicitly defined by simple union types,
named by appending "Kind" to the name of their simple union type,
like in generated C.
- Types that don't occur in generated C. Their names start with ':'
so they don't clash with the user's names.
* All type references are by name.
* The struct and union types are generalized into an object type.
* Base types are flattened.
* Commands take a single argument and return a single result.
Dictionary argument or list result is an implicit type definition.
The empty object type is used when a command takes no arguments or
produces no results.
The argument is always of object type, but the introspection schema
doesn't reflect that.
The 'gen': false directive is omitted as implementation detail.
The 'success-response' directive is omitted as well for now, even
though it's not an implementation detail, because it's not used by
QMP.
* Events carry a single data value.
Implicit type definition and empty object type use, just like for
commands.
The value is of object type, but the introspection schema doesn't
reflect that.
* Types not used by commands or events are omitted.
Indirect use counts as use.
* Optional members have a default, which can only be null right now
Instead of a mandatory "optional" flag, we have an optional default.
No default means mandatory, default null means optional without
default value. Non-null is available for optional with default
(possible future extension).
* Clients should *not* look up types by name, because type names are
not ABI. Look up the command or event you're interested in, then
follow the references.
TODO Should we hide the type names to eliminate the temptation?
New generator scripts/qapi-introspect.py computes an introspection
value for its input, and generates a C variable holding it.
It can generate awfully long lines. Marked TODO.
A new test-qmp-input-visitor test case feeds its result for both
tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a
QmpInputVisitor to verify it actually conforms to the schema.
New QMP command query-qmp-schema takes its return value from that
variable. Its reply is some 85KiBytes for me right now.
If this turns out to be too much, we have a couple of options:
* We can use shorter names in the JSON. Not the QMP style.
* Optionally return the sub-schema for commands and events given as
arguments.
Right now qmp_query_schema() sends the string literal computed by
qmp-introspect.py. To compute sub-schema at run time, we'd have to
duplicate parts of qapi-introspect.py in C. Unattractive.
* Let clients cache the output of query-qmp-schema.
It changes only on QEMU upgrades, i.e. rarely. Provide a command
query-qmp-schema-hash. Clients can have a cache indexed by hash,
and re-query the schema only when they don't have it cached. Even
simpler: put the hash in the QMP greeting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV+Y0VAAoJEL/70l94x66DppAH/393irRPGYJiZqClXDmPZymd
Ilv+mKQIA+QSGiMaVoq0POWqvSa6oPOIOAK8BexhHDWPnxDSeAU9JzjrkwQILjD3
A5kFsR1mhw/oV8aZCsE926SUoY90VH7QP2r0iGdur1VV9DG7CUE8q95umJuU1FCo
hvGI2HjlAPvxSrO+Y5vu4ZNOa5XBiUoLodT0j+jNZfoNMx3irAqkJLPqTUuPT8np
jBeu1MtMe3wNjDBm3WMVZwkNEZ3YtuhRkBeggXqDIl1Jm9lq4Eitk7rtETXm6yHz
Vjp9uAF4en/72gXbELRXp+aWvESEABcouLZrdPV/yjOmQD2oTFC7sZrm1c5rZPw=
=MkK8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Linux header update and cleanup
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
# gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (24 commits)
nbd: release exp->blk after all clients are closed
checkpatch: Escape left braces in regex
monitor: uninclude cpu_ldst
include/exec: Move cputlb exec.c defs out
cputlb: Change tlb_set_dirty() arg to cpu
cputlb: move CPU_LOOP() for tlb_reset() to exec.c
translate: move real_host_page setting to -common
tcg: Move tci_tb_ptr to -common
tcg: split tcg_op_defs to -common
translate-all: Move tcg_handle_interrupt() to -common
cpu-exec: Migrate some generic fns to cpu-exec-common
qemu-char: Use g_new() & friends where that makes obvious sense
monitor: added generation of documentation for hmp-commands-info.hx
hmp-commands.hx: fix end of table info
monitor: remove target-specific code from monitor.c
hmp-commands-info: move info_cmds content out of monitor.c
i386/kvm: Hyper-v crash msrs set/get'ers and migration
kvm: Add kvm system event crash handler
cpu: Add crash_occurred flag into CPUState
target-i386: move asm-x86/hyperv.h to standard-headers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.
From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qom objects are currently added to common-obj-y
which is only linked into the system emulators. The
later crypto patches will depend on QOM infrastructure
and will also be used from tools binaries. Thus the QOM
objects are moved into a new qom-obj-y variable which
can be referenced when linking tools, system emulators
and tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Future patches will be adding more crypto related APIs which
rely on QOM infrastructure. This creates a problem, because
QOM relies on library constructors to register objects. When
you have a file in a static .a library though which is only
referenced by a constructor the linker is dumb and will drop
that file when linking to the final executable :-( The only
workaround for this is to link the .a library to the executable
using the -Wl,--whole-archive flag, but this creates its own
set of problems because QEMU is relying on lazy linking for
libqemuutil.a. Using --whole-archive majorly increases the
size of final executables as they now contain a bunch of
object code they don't actually use.
The least bad option is to thus not include the crypto objects
in libqemuutil.la, and instead define a crypto-obj-y variable
that is referenced directly by all the executables that need
this code (tools + softmmu, but not qemu-ga). We avoid pulling
entire of crypto-obj-y into the userspace emulators as that
would force them to link to gnutls too, which is not required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'msi' target reports error if we attempt to use it when QEMU hasn't
been ./configure'd to enable it. The parenthesis cause an interpreter
error if we don't enclose the error in quotes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently VSS dll/tlb files for use in w32 builds are only built as a
result of having been added to the general 'tools' target alongside
qemu-ga. This is fine for default make target, but if we build
qemu-ga directly via `make qemu-ga.exe`, the VSS files are not
created.
Fix this by moving the VSS dependencies to qemu-ga.exe directly.
With this move we can move the VSS files back out of 'tools',
and drop the extra handling from MSI target in Makefile.
Now we can build qemu-ga MSI package with:
./configure ...
make qemu-ga.exe
make msi
or simply:
./configure ...
make msi
and no longer need to do a full build beforehand.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a simple man page for the qemu agent.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*squashed in review comments from Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Previously, if building out-of-tree, the MSI build would fail since
it wasn't able to find the needed files.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* fixed up commit msg formating
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We want to have uniform build messages, so fix some messages
which did not follow the standard pattern.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cscope and TAGS files work in source directory rather than the build
directory, also, don't ask users to run configure first, because they
may have an out of tree build.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
New options were added to enable Windows MSI installation package
creation:
Option --enable-guest-agent-msi, like the name suggests, enables building
Windows MSI package for QEMU guest agent; option --disable-guest-agent-msi
disables MSI package creation; by default, no MSI package is created
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-5-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The target-x86_64.conf sysconfig file has been empty and essentially ignored
now for several years. This change removes the unused file to enable moving
towards a stateless configuration.
Signed-off-by: Ikey Doherty <michael.i.doherty@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Mandatory option is silly, and the error handling is missing: the
programs crash when -i isn't supplied. Make it an argument, and check
it properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
perl script to transform shader programs into c include files with
static string constands containing the shader programs, so we can
easily embed them into qemu. Also some Makefile logic for them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
On BSDs "make" is typically BSD make, while "gmake" is GNU make.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <1427911118-21905-1-git-send-email-emaste@freebsd.org>
[Fix $(INSTALLER) too as reported by Fam Zheng. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The .d file name must match exactly what is used in the SUBDIR_DEVICES_MAK_DEP
variable. Instead of making assumptions in the make_device_config.sh script,
just pass it in.
Similarly, the makefile target may not match the output file name, because
Makefile uses a temporary file. Instead of making assumptions on what the
Makefile does, emit the config-devices.mak file to stdout, and use the
passed-in destination as the makefile target
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
V=1 should show what's going on, it's not nice
to silence things unconditionally.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1424332114-13440-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables parallel building of QEMU in MSYS+MinGW environment.
Currently an attempt to build QEMU in parallel fails on generation of
version.lo (and version.o too).
The cause of the failure is that when listing prerequisites "Makefile"
references "config-host.h" by absolute path in some rules and by relative
path in others. Make cannot figure out that these references points to the
same file which leads to the race: the generation of "version.*" which
requires "$(BUILD_DIR)/config-host.h" is launched in parallel with the
generation of "config-host.h" needed by other "Makefile" targets.
This patch removes "$(BUILD_DIR)/" prefix from corresponding prerequisite
of "version.*". There is no other prerequisites "$(BUILD_DIR)/config-host.h"
found.
Also note that not every version of MSYS is able to build QEMU in parallel,
see: "http://sourceforge.net/p/mingw/bugs/1950/". The suggested version is
1.0.17.
Signed-off-by: Vasily Efimov <real@ispras.ru>
Message-Id: <1424264377-5992-1-git-send-email-real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
config.status and tests/qemu-iotests/common.env are generated files
that should be deleted during 'make distclean'.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Install the ./trace-events file into the data directory. This file
contains the list of trace events that were built into QEMU at
compile-time.
The file is a handy reference for the set of trace events that the QEMU
binary was built with. It is also needed by the simpletrace.py tool
that parses binary trace data either emitted from QEMU when built with
--enable-trace-backend=simple or by the SystemTap simpletrace script
that QEMU provides.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1411486175-3017-1-git-send-email-stefanha@redhat.com
Generate header "trace/generated-tcg-tracers.h" with the necessary routines for
tracing events in guest code:
* trace_${event}_tcg
Convenience wrapper that calls the translation-time tracer
'trace_${event}_trans', and calls 'gen_helper_trace_${event}_exec to
generate the TCG code to later trace the event at execution time.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates header "trace/generated-helpers-wrappers.h" with definitions for TCG
helper wrappers.
These wrappers ('gen_helper_trace_${event}_exec_wrapper') transform mixed native
and TCG argument types to TCG types and call the actual TCG helpers
('gen_helper_trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace
events in guest code at execution time.
The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native
argument types to their original types (as defined in "trace-events") and call
the tracing routine ('trace_${event}_exec').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.h" with TCG helper declarations to trace
events in guest code at execution time ('trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These three objects are repeated in multiple times in Makefiles. Let's
just add them to libqemuutil.a, and don't list explicitly elsewhere.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use common rule (macro) to install and strip binaries, and use
it in all places where we install binaries, instead of fixing
bugs like 1319493 in every place.
(This fixes https://bugs.launchpad.net/bugs/1319493)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qapi-event.py will parse the schema and generate qapi-event.c, then
the API in qapi-event.c can be used to handle events in qemu code.
All API have prefix "qapi_event".
The script mainly includes two parts: generate API for each event
define, generate an enum type for all defined events.
Since in some cases the real emit behavior may change, for example,
qemu-img would not send a event, a callback layer is used to
control the behavior. As a result, the stubs at compile time
can be saved, the binding of block layer code and monitor code
will become looser.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qapi-schema.json has been split into three smaller JSON files in qapi/.
Add them as dependencies for the code generation in the Makefile, so
changes to them will result in a rebuilt of all QAPI-dependent code.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Adds support to compile QEMU with multiple tracing backends at the same time.
For example, you can compile QEMU with:
$ ./configure --enable-trace-backends=ftrace,dtrace
Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.
This patch allows having both available without recompiling QEMU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/bonzini/configure:
libcacard: remove libcacard-specific CFLAGS and LIBS from global vars
build: simplify and fix fix-obj-vars
build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax
build: add support for per-object -cflags and -libs to all rules
Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG)
Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL)
Makefile: strip tools and modules too
build: simplify Makefile.target around unnest-vars invocations
build: simplify Makefile.target a bit, use just one rule for softmmu
build: Fix per-object variables for Makefile.target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use an explicit input file on the command-line instead of reading from standard
input.
It also outputs the proper file name when there's an error.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have $(INSTALL_LIB) which is the same as $(INSTALL_PROG) but
uses correct permissions. Loadable objects (modules) are like
shared libraries, not like programs.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 52ba784d3 replaced $(STRIP_OPT) with $(STRIP) in some
places (for example, Makefile.target), but not all of them.
There are a few places remain in main Makefile which still
uses $(STRIP_OPT). Replace these places with $(STRIP) too.
While at it, simplify variable pattern substitution of the
surrounding places, change $(patsubst pat,rep,$(var)) into
$(var:pat=rep) which is much easier to read (this is probably
a good idea to do everywhere).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The build rule for qga/vss-win32/qga-vss.dll is broken by commit
ba1183da9a, because it misses
qga-vss-dll-obj-y in the list of nested variables.
This fixes build of qga-vss.dll by adding qga-vss-dll-obj-y to the list.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When installing modules (when --enable-modules is specified for
./configure), Makefile uses the following construct to replace all
slashes with dashes in module name:
${s//\//-}
This is a bash-specific substitution mechanism. POSIX does not
have it, and some operating systems (for example Debian) does not
implement this construct in default shell (for example dash).
Use more traditional way to perform the substitution: use `tr' tool.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1396707946-21351-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a dangerous bug: "make clean" after "make distclean" will
delete every single file including those under .git, if you do in-tree
build!
Rationale: A first "make distclean" will unset $(DSOSUF), a following
"make distclean" or "make clean" will find all the files and delete it.
Fix it by explicitly typing the file extensions here, and combine
multiple find invocations into one.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1395020122-4957-1-git-send-email-famz@redhat.com
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass all the relevant sub-directory make variables.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20140120112153.5685.30949.stgit@fimbulvetr.bsc.es
* remotes/mcayland/qemu-sparc:
sun4m: Add Sun CG3 framebuffer initialisation function
sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM
sun4m: fix slavio timer RUN/STOP bit
sun4m: Set HostID in NVRAM
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Comment from Makefile.objs:
The system emulation needs this dependency (which was missing in Makefile),
otherwise builds without tools (or massive parallel builds) fail.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does
for $(block-obj-y).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add necessary rules and flags for shared object generation.
The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
3) For all files ending up in %.so, the following is added automatically:
foo.o-cflags += -fPIC -DBUILD_DSO
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add generation of new files for LTTng ust.
Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The default machine-type (pc-i440fx-2.0) now requires bios-256k.bin, but
"make install" isn't installing it, so qemu-system-x86_64 won't run out
of the box. Add it to BLOBS so it gets installed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: William Dauchy <william@gandi.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.
SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.
The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds Czech keyboard layout to available keymap files
and Makefile.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.
Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.
Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
This command will package the clean operations in tests. Now root Makefile
simply calls the command and do not care the details of it any more. Original
the built binaries for test will not be removed, now they will be deleted
in clean operation.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
This file should be generated in the BUILD_DIR, as all other docs.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
./configure --with-vss-sdk="/path/to/VSS SDK"
If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.
VSS SDK is available from:
http://www.microsoft.com/en-us/download/details.aspx?id=23490
To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.
In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 0b516ef0df added version.o to all
executables, but broke out-of-tree builds: for those builds the pattern
rule %.o: %.rc from rules.mak does not match, so version.o was no longer
built.
Adding explicit build rules fixes this.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU executables for w32, w64 had included meta information built from
version.rc. These rules were changed several times some months ago.
The latest version added version.o to the tools, but not to the system
emulations.
This patch adds the meta information to all system emulations again.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1375985887-3984-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new rules in Makefile allow building installers for QEMU on Windows
using NSIS, a package which is also available for Linux distributions
(so cross builds are possible).
The rules for NSIS are in qemu.nsi which also uses two new images.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The dtc submodule's makefile expects -I include directives to be
in CPPFLAGS, not CFLAGS. Getting this wrong meant that the include
directive would not be applied when generating the dependency .d
files. This in turn meant that we couldn't build libfdt when
doing an out of tree build with clang. (gcc's dependency output
is slightly different from clang in this situation so it happened
to work.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When splitting openSUSE's qemu and qemu-linux-user packages we noticed
that for linux-user-only builds unrelated man pages got installed.
It's surely possible to delete them before packaging, but not installing
them in the first place seems more logical.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The current icon looks pretty terrible rendered in Gnome. This
switches to a transparent SVG which looks much nicer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It was decided to not make this command available in QMP in order to
make clear that this is not supposed to be a stable API and should be
used only for testing and debugging purposes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the implementation of all qemu-io commands that make sense to be
called from the qemu monitor, i.e. everything except open, close and
quit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Otherwise the default local state directory of POSIX qga won't exist after
installation with a non-standard ${prefix} or DESTDIR.
For now qga is the only user of ".../var" (= $qemu_localstatedir) too, so
don't create that directory either unless we're installing the agent.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While commit c02817e5bf fixed compilation
without an installed libtool, moving the dependencies to rules.mak does
not work because the version-*-y variables are not defined yet. Building
in a clean tree thus fails.
Revert the commit and remove the dummy /bin/false assignment to LIBTOOL.
This makes the build work, at the price of slightly worse errors when
there are Makefile bugs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1367425815-15083-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes the test on $(LIBTOOL) work. Otherwise, LIBTOOL
is /bin/false by the time the test is done.
Fixes Win32 compilation without a working cross-libtool.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have all the source code ready, add a compiled blob into
the QEMU source tree, so that people without access to an s390 compiler
can run the s390-ccw firmware.
Signed-off-by: Alexander Graf <agraf@suse.de>
Build DTC as QEMU is built. Fixes the issue with mingw build which can't
handles DTC's default CFLAGS.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The submodule DTC should just build and use DTC as static (the whole
motivation for using submod is lack of widespread distro support).
The .so causes build failures on some platforms, so adjust the make
target to just build the static lib.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
# By Alon Levy (15) and others
# Via Alon Levy
* alon/libcacard_ccid.1: (28 commits)
libcacard/cac: change big switch functions to single return point
dev-smartcard-reader: empty implementation for Mechanical (fail correctly)
libcacard: move atr setting from macro to function
libcacard/vreader: add debugging messages for apdu
dev-smartcard-reader: copy atr protocol to ccid parameters
dev-smartcard-reader: change default protocol to T=0
dev-smartcard-reader: define structs for CCID_Parameter internals
ccid-card-passthru, dev-smartcard-reader: add debug environment variables
ccid-card-passthru: add atr check
libcacard: change default ATR
dev-smartcard-reader: reuse usb.h definitions
dev-smartcard-reader: support windows guest
dev-smartcard-reader: remove aborts (never triggered, but just in case)
dev-smartcard-reader: nicer debug messages
dev-smartcard-reader: white space fixes
libcacard: remove default libcoolkey loading
libcacard: remove sql: prefix
libcacard: teach vscclient to use GMainLoop for portability
libcacard: vscclient to use QemuThread for portability
libcacard: split vscclient main() from socket reading
...
Message-id: 921423767.1475937.1366790789930.JavaMail.root@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Moving the inclusions closer to Makefile, and before rules.mak, makes
Makefile and Makefile.target more consistent with each other.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1366102238-12374-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Configure to use the DTC submodule to build libfdt when no system libfdt
is found. Prompt to install the DTC submodule if --enable-fdt is set but
no DTC can be found.
DTC has no out-of-tree build capability, so the configure will symlink
the Makefile and scripts directory in the out of tree build directory
and pass in all the needed DTC arguments to make out of tree build happen.
Ideally we fix the DTC make to support out of tree, but did it this way to
avoid commits to DTC.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Commit c45e5b5b30 made a switch use the efi-enabled nic roms by default.
This patch updates the Makefile to install the roms so they can actually be used.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Message-id: 1365455293-7084-1-git-send-email-linux@eikelenboom.it
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Uses tracetool to generate a backend-independent tracing event description
(struct TraceEvent).
The values for such structure are generated with the non-public "events"
backend ("events-c" frontend).
The generation of the defines to check if an event is statically enabled is also
moved to the "events" backend ("events-h" frontend).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the Makefile creates TAGS for emacs with the command:
find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
That works only if xargs ends up invoking etags just once. If xargs runs
etags several times, as it will if there are enough files, then the later
invocations will overwrite the output from the earlier invocations. This
patch uses the etags --append option to fix the bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1363057048-21534-1-git-send-email-david@gibson.dropbear.id.au
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
What 23bf49b5ec really seemed to try to
fix is that Makefile could recurse into *-softmmu/ subdirectories before
a new *-softmmu/config-devices.mak was generated from pci.mak.
Fix this by adding a dependency on config-all-devices.mak, which in turn
has dependencies on *-softmmu/config-devices.mak.
Reported-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Placing the config-devices.mak.d file alongside the config-devices.mak
file in *-softmmu/ lead to it getting included into through
*-softmmu/Makefile in addition to ./Makefile, leading to confusion.
Instead, emit it to ./%-config-devices.mak.d, where it is included.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This includes a de_DE translation from Kevin Wolf and an it translation from
Paolo Bonzini.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-8-git-send-email-aliguori@us.ibm.com
.lo files in stubs/, util/ and libcacard/ were not cleaned.
Fix this.
Cc: Blue Swirl <blauwirbel@gmail.com>
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
extra-obj-y is somewhat complicated to understand. Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit eb8eb53e5846a957cf333f2e1ec8cb6e0c04 ("libcacard: rewrite
Makefile in non-recursive style") refactored libcacard/Makefile so it
can be included by the top-level Makefile.
The top-level clean target still loops over subdirectories, including
libcacard/, to invoke recursive clean. Remove libcacard from the
recursive clean since its files are already included at the top level.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The version.o file did not appear explicitly as a dependency, and
this caused clean builds to fail. Force its build by making the
Makefile depend on version.o.
(We cannot add it to libqemuutil.a, because it doesn't export any
symbol and thus would not be pulled by the linker).
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Store --extra-cflags and --extra-ldflags in config-host.mak,
then pass them on to the pixman configure script.
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split them between libqemuutil.a and, for those used by qemu-img/io/nbd,
block-obj-y.
Static libraries ensure that binaries such as qemu-ga do not include
unused modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The WARNING message from commit f7e4dd6c made me notice.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Adds sample hook scripts for --fsfreeze-hook option of qemu-ga.
- fsfreeze-hook : execute scripts in fsfreeze-hook.d/
- fsfreeze-hook.d/mysql-flush.sh.sample : quiesce MySQL before snapshot
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
--
Changes in v2:
* Do not depend on "qemu-timer-common.o".
* Use "$(obj)" in rules to refer to the build sub-directory.
* Remove dependencies against "$(GENERATED_HEADERS)".
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently Makefile test if pixman have configure log, but the script directly
return error if that file do not exist. This patch fix it.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The executables in i386-softmmu, i386-linux-user, ...
depend on the recently added libqemustub.a.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Weak symbols were a nice idea, but they turned out not to be a good one.
Toolchain support is just too sparse, in particular llvm-gcc is totally
broken.
This patch uses a surprisingly low-tech approach: a static library.
Symbols in a static library are always overridden by symbols in an
object file. Furthermore, if you place each function in a separate
source file, object files for unused functions will not be taken in.
This means that each function can use all the dependencies that it needs
(especially QAPI stuff such as error_setg).
Thus, all stubs are placed in separate object files and put together in
a static library. The library then is linked to all programs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Pass on CFLAGS to the pixman configure script.
Add -fPIC to the cflags, needed to make the final link succeed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set --host when calling pixman configure while doing cross builds so
pixman's autoconf picks up the cross build tools correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we try to do an out-of-tree build but the source tree we're building from
has been used in the past for an in-tree build then things will go
confusingly wrong. Specifically, some parts of the build process will pull
in generated files from the old in-tree build (because SRC_PATH is on
the vpath). Diagnose this situation so we can produce a useful error
message and tell the user how to fix it (run distclean in the source tree).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are QAPI-friendly versions of the qemu-sockets functions. They
support IP sockets, Unix sockets, and named file descriptors, using a
QAPI union to dispatch to the correct function.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need them because qemu-sockets will soon be using SocketAddress.
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no reason to require configure to run before running a clean
target, so check MAKECMDGOALS before.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The old code aborted configure when no emulation target was selected.
Even after removing the 'exit 1', it tried to read from STDIN
when QEMU was configured with
configure' '--disable-user' '--disable-system'
This is fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This file is not needed anymore, as QEMU won't ship any config-based
cpudefs out of the box, relying only on the builtin CPU models.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* stefanha/trivial-patches:
ivshmem, qdev-monitor: fix order of qerror parameters
iov_send_recv(): Handle zero bytes case even if OS does not
framebuffer: Fix spelling in comment (leight -> height)
Spelling fix in comment (peripherans -> peripherals)
docs: Fix spelling (propery -> property)
trace: Fix "Qemu" -> "QEMU"
cputlb.c: Fix out of date comment
ehci: fix assertion typo
Makefile: Avoid explicit list of directories in clean target
Avoid having an explicit list of directories in the 'clean'
target by using 'find' to remove all .o and .d files instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When qemu_open is passed a filename of the "/dev/fdset/nnn"
format (where nnn is the fdset ID), an fd with matching access
mode flags will be searched for within the specified monitor
fd set. If the fd is found, a dup of the fd will be returned
from qemu_open.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 427a1a2cb1 ("qapi: avoid reserved
keywords") modifies qapi.py, which is used by qapi-types.py and other
Python scripts. Because Makefile has no dependencies for qapi.py the
qapi code generator will not be rerun and the following build error is
produced:
net/slirp.c: In function ‘net_init_slirp’:
net/slirp.c:721:50: error: ‘NetdevUserOptions’ has no member named ‘q_restrict’
Fix this issue by adding the missing qapi.py dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch will fix the following linking failed:
LINK qemu-ga
gcc: error: qga/../qapi-generated/qga-qapi-types.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qapi-visit.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qmp-marshal.o: No such file or directory
make: *** [qemu-ga] Error 1
Commit cdc976b040 changes the
dependencies of qemu-ga to depend "../qapi-generated/qga-qapi-types.o",
which will be expanded to "qga/../qapi-generated/qga-qapi-types.o" when
building qemu-ga.
In top-level Makefile, we defined a target "qapi-generated/qga-qapi-types.o"
which was not equal to "qga/../qapi-generated/qga-qapi-types" in the
Makefile world. So "No such file" error happened when qemu-ga was linking.
The easy approach to fix is to change the target name to
"qga/../qapi-generated/qga-qapi-types.o", but it is weird.
So, in order to solve it more graciously, I move those temporary
files(qga-qapi-*.{c,h}) qemu-ga depends on to qemu-ga/qapi-generated,
this makes dependencies more clearer.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
After commit dcff25f2cd, Dependency file
are taken from the directories that have a Makefile.objs file. This is
not enough, since files can be included from other directories.
So, pick them from directories that have an object file in them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
No reason to leave them out, and it will ensure that the dependencies
are picked up. Later we can perhaps move the files to another
directory to avoid ../ usage.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
34bb443ee7 broke the build but in a subtle way.
The patch on the ML was actually based on the 1.1.1 stable branch
(accidentally). When I merged it from the ML, the fuzzing got resolved in a
such a way that the newly introduced Makefile dependency on GENERATED_HEADERS
got lost (that was not in 1.1.1).
The dist bits also got duplicated (but this is just cosmetic).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Let's stop screwing up releases by having a script do the work that Anthony's
fat fingers can't seem to get right.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not needed, because the 'all' rule does the same.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
tci: Support INDEX_op_bswap64_i64
target-i386: Use QEMU instead of Qemu
Makefile.hw: avoid overly large 'make clean' rm command
configure: Fix typo
arm_gic: Send dbg msgs to stderr not stdout
checkpatch: Add QEMU specific rule
qemu-config: Use QEMU instead of Qemu
libqtest: Fix socket_accept() to pass address_len
Makefile.user: Define CONFIG_USER_ONLY for libuser/
Makefile: Remove macro qapi-dir
Makefile: Remove BUILD_DIR from qapi-dir
Install 'bepo' keymap already included in Qemu source
Now that all of the device tree bits are generated during runtime, we
can get rid of the device tree blob and instead start from scratch with
an empty device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
As qapi-dir was now a constant, it can be replaced by its value.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
qapi-dir does not need an absolute path. All other build directories
are relative. When BUILD_DIR is removed, the build output looks better
(no long lines with absolute paths when everything else uses short
lines):
GEN qapi-generated/qga-qapi-types.c
CC qapi-generated/qga-qapi-types.o
GEN qapi-generated/qga-qapi-visit.c
CC qapi-generated/qga-qapi-visit.o
GEN qapi-generated/qga-qmp-marshal.c
CC qapi-generated/qga-qmp-marshal.o
Using a relative path also avoids potential problems when BUILD_DIR
includes blanks.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The 'bepo' layout (a french dvorak-like keyboard layout) was added
about one year ago, (see commit 2a3c633c1e),
but I missed to declare to install it.
Signed-off-by: Frédéric Boiteux <fboiteux@free.fr>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Link trace objects to fix these errors:
LINK vscclient
oslib-posix.o: In function `trace_qemu_vfree':
/src/qemu/obj-amd64/./trace.h:39: undefined reference to `trace1'
oslib-posix.o: In function `trace_qemu_memalign':
/src/qemu/obj-amd64/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
/src/qemu/obj-amd64/./trace.h:35: undefined reference to `trace2'
Add LDFLAGS to vscclient link command.
Clean up also in subdirectories of libcacard.
Use quiet-command for sed invocation.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alon Levy <alevy@redhat.com>
I think I understand enough of what's going on in these rules to ensure this is
right. But I could certainly use a second or third opinion...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
File is targeted for install, but is never installed.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
