We already don't ever migrate memory that corresponds to discarded ranges
as managed by a RamDiscardManager responsible for the mapped memory region
of the RAMBlock.
virtio-mem uses this mechanism to logically unplug parts of a RAMBlock.
Right now, we still populate zeropages for the whole usable part of the
RAMBlock, which is undesired because:
1. Even populating the shared zeropage will result in memory getting
consumed for page tables.
2. Memory backends without a shared zeropage (like hugetlbfs and shmem)
will populate an actual, fresh page, resulting in an unintended
memory consumption.
Discarded ("logically unplugged") parts have to remain discarded. As
these pages are never part of the migration stream, there is no need to
track modifications via userfaultfd WP reliably for these parts.
Further, any writes to these ranges by the VM are invalid and the
behavior is undefined.
Note that Linux only supports userfaultfd WP on private anonymous memory
for now, which usually results in the shared zeropage getting populated.
The issue will become more relevant once userfaultfd WP supports shmem
and hugetlb.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's factor out prefaulting/populating to make further changes easier to
review and add a comment what we are actually expecting to happen. While at
it, use the actual page size of the ramblock, which defaults to
qemu_real_host_page_size for anonymous memory. Further, rename
ram_block_populate_pages() to ram_block_populate_read() as well, to make
it clearer what we are doing.
In the future, we might want to use MADV_POPULATE_READ to speed up
population.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's use QEMU_ALIGN_DOWN() and friends to make the code a bit easier to
read.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, when someone (i.e., the VM) accesses discarded parts inside a
RAMBlock with a RamDiscardManager managing the corresponding mapped memory
region, postcopy will request migration of the corresponding page from the
source. The source, however, will never answer, because it refuses to
migrate such pages with undefined content ("logically unplugged"): the
pages are never dirty, and get_queued_page() will consequently skip
processing these postcopy requests.
Especially reading discarded ("logically unplugged") ranges is supposed to
work in some setups (for example with current virtio-mem), although it
barely ever happens: still, not placing a page would currently stall the
VM, as it cannot make forward progress.
Let's check the state via the RamDiscardManager (the state e.g.,
of virtio-mem is migrated during precopy) and avoid sending a request
that will never get answered. Place a fresh zero page instead to keep
the VM working. This is the same behavior that would happen
automatically without userfaultfd being active, when accessing virtual
memory regions without populated pages -- "populate on demand".
For now, there are valid cases (as documented in the virtio-mem spec) where
a VM might read discarded memory; in the future, we will disallow that.
Then, we might want to handle that case differently, e.g., warning the
user that the VM seems to be mis-behaving.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Migration code now properly handles RAMBlocks which are indirectly managed
by a RamDiscardManager. No need for manual handling via the free page
optimization interface, let's get rid of it.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't want to migrate memory that corresponds to discarded ranges as
managed by a RamDiscardManager responsible for the mapped memory region of
the RAMBlock. The content of these pages is essentially stale and
without any guarantees for the VM ("logically unplugged").
Depending on the underlying memory type, even reading memory might populate
memory on the source, resulting in an undesired memory consumption. Of
course, on the destination, even writing a zeropage consumes memory,
which we also want to avoid (similar to free page hinting).
Currently, virtio-mem tries achieving that goal (not migrating "unplugged"
memory that was discarded) by going via qemu_guest_free_page_hint() - but
it's hackish and incomplete.
For example, background snapshots still end up reading all memory, as
they don't do bitmap syncs. Postcopy recovery code will re-add
previously cleared bits to the dirty bitmap and migrate them.
Let's consult the RamDiscardManager after setting up our dirty bitmap
initially and when postcopy recovery code reinitializes it: clear
corresponding bits in the dirty bitmaps (e.g., of the RAMBlock and inside
KVM). It's important to fixup the dirty bitmap *after* our initial bitmap
sync, such that the corresponding dirty bits in KVM are actually cleared.
As colo is incompatible with discarding of RAM and inhibits it, we don't
have to bother.
Note: if a misbehaving guest would use discarded ranges after migration
started we would still migrate that memory: however, then we already
populated that memory on the migration source.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement it similar to the replay_populated callback.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce replay_discarded callback similar to our existing
replay_populated callback, to be used my migration code to never migrate
discarded memory.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Both dump-guest-memory and live migration caches vm state at the beginning.
Either of them entering the other one will cause race on the vm state, and even
more severe on that (please refer to the crash report in the bug link).
Let's block live migration in dump-guest-memory, and that'll also block
dump-guest-memory if it detected that we're during a live migration.
Side note: migrate_del_blocker() can be called even if the blocker is not
inserted yet, so it's safe to unconditionally delete that blocker in
dump_cleanup (g_slist_remove allows no-entry-found case).
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1996609
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
An internal version that removes -only-migratable implications. It can be used
for temporary migration blockers like dump-guest-memory.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
save_snapshot() checks migration blocker, which looks sane. At the meantime we
should also teach the blocker add helper to fail if during a snapshot, just
like for migrations.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
use dirty ring feature to implement dirtyrate calculation.
introduce mode option in qmp calc_dirty_rate to specify what
method should be used when calculating dirtyrate, either
page-sampling or dirty-ring should be passed.
introduce "dirty_ring:-r" option in hmp calc_dirty_rate to
indicate dirty ring method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <7db445109bd18125ce8ec86816d14f6ab5de6a7d.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
since main thread may "query dirty rate" at any time, it's better
to move init step into main thead so that synchronization overhead
between "main" and "get_dirtyrate" can be reduced.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <109f8077518ed2f13068e3bfb10e625e964780f1.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
registering get_dirtyrate thread in advance so that both
page-sampling and dirty-ring mode can be covered.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <d7727581a8e86d4a42fc3eacf7f310419b9ebf7e.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
introduce "DirtyRateMeasureMode" to specify what method should be
used to calculate dirty rate, introduce "DirtyRateVcpu" to store
dirty rate for each vcpu.
use union to store stat data of specific mode
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <661c98c40f40e163aa58334337af8f3ddf41316a.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
since dirty ring has been introduced, there are two methods
to track dirty pages of vm. it seems that "logging" has
a hint on the method, so rename the global_dirty_log to
global_dirty_tracking would make description more accurate.
dirty rate measurement may start or stop dirty tracking during
calculation. this conflict with migration because stop dirty
tracking make migration leave dirty pages out then that'll be
a problem.
make global_dirty_tracking a bitmask can let both migration and
dirty rate measurement work fine. introduce GLOBAL_DIRTY_MIGRATION
and GLOBAL_DIRTY_DIRTY_RATE to distinguish what current dirty
tracking aims for, migration or dirty rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <9c9388657cfa0301bd2c1cfa36e7cf6da4aeca19.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
dirty_pages is used to calculate dirtyrate via dirty ring, when
enabled, kvm-reaper will increase the dirty pages after gfns
being dirtied.
kvm_dirty_ring_enabled shows if kvm-reaper is working. dirtyrate
thread could use it to check if measurement can base on dirty
ring feature.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <fee5fb2ab17ec2159405fc54a3cff8e02322f816.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
destination:
../qemu/build/qemu-system-x86_64 -enable-kvm -netdev tap,id=hn0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=50:52:54:00:11:22 -boot c -drive if=none,file=./Fedora-rdma-server-migration.qcow2,id=drive-virtio-disk0 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -m 2048 -smp 2 -device piix3-usb-uhci -device usb-tablet -monitor stdio -vga qxl -spice streaming-video=filter,port=5902,disable-ticketing -incoming rdma:192.168.22.23:8888
qemu-system-x86_64: -spice streaming-video=filter,port=5902,disable-ticketing: warning: short-form boolean option 'disable-ticketing' deprecated
Please use disable-ticketing=on instead
QEMU 6.0.50 monitor - type 'help' for more information
(qemu) trace-event qemu_rdma_block_for_wrid_miss on
(qemu) dest_init RDMA Device opened: kernel name rxe_eth0 uverbs device name uverbs2, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs2, infiniband class device path /sys/class/infiniband/rxe_eth0, transport: (2) Ethernet
qemu_rdma_block_for_wrid_miss A Wanted wrid CONTROL SEND (2000) but got CONTROL RECV (4000)
source:
../qemu/build/qemu-system-x86_64 -enable-kvm -netdev tap,id=hn0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=50:52:54:00:11:22 -boot c -drive if=none,file=./Fedora-rdma-server.qcow2,id=drive-virtio-disk0 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -m 2048 -smp 2 -device piix3-usb-uhci -device usb-tablet -monitor stdio -vga qxl -spice streaming-video=filter,port=5901,disable-ticketing -S
qemu-system-x86_64: -spice streaming-video=filter,port=5901,disable-ticketing: warning: short-form boolean option 'disable-ticketing' deprecated
Please use disable-ticketing=on instead
QEMU 6.0.50 monitor - type 'help' for more information
(qemu)
(qemu) trace-event qemu_rdma_block_for_wrid_miss on
(qemu) migrate -d rdma:192.168.22.23:8888
source_resolve_host RDMA Device opened: kernel name rxe_eth0 uverbs device name uverbs2, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs2, infiniband class device path /sys/class/infiniband/rxe_eth0, transport: (2) Ethernet
(qemu) qemu_rdma_block_for_wrid_miss A Wanted wrid WRITE RDMA (1) but got CONTROL RECV (4000)
NOTE: we use soft RoCE as the rdma device.
[root@iaas-rpma images]# rdma link show rxe_eth0/1
link rxe_eth0/1 state ACTIVE physical_state LINK_UP netdev eth0
This migration could not be completed when out of order(OOO) CQ event occurs.
The send queue and receive queue shared a same completion queue, and
qemu_rdma_block_for_wrid() will drop the CQs it's not interested in. But
the dropped CQs by qemu_rdma_block_for_wrid() could be later CQs it wants.
So in this case, qemu_rdma_block_for_wrid() will block forever.
OOO cases will occur in both source side and destination side. And a
forever blocking happens on only SEND and RECV are out of order. OOO between
'WRITE RDMA' and 'RECV' doesn't matter.
below the OOO sequence:
source destination
rdma_write_one() qemu_rdma_registration_handle()
1. S1: post_recv X D1: post_recv Y
2. wait for recv CQ event X
3. D2: post_send X ---------------+
4. wait for send CQ send event X (D2) |
5. recv CQ event X reaches (D2) |
6. +-S2: post_send Y |
7. | wait for send CQ event Y |
8. | recv CQ event Y (S2) (drop it) |
9. +-send CQ event Y reaches (S2) |
10. send CQ event X reaches (D2) -----+
11. wait recv CQ event Y (dropped by (8))
Although a hardware IB works fine in my a hundred of runs, the IB specification
doesn't guaratee the CQ order in such case.
Here we introduce a independent send completion queue to distinguish
ibv_post_send completion queue from the original mixed completion queue.
It helps us to poll the specific CQE we are really interested in.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Patches from Zoltan:
- Various clean up to align the code style with the rest of the code base
- QOM'ify the SH_SERIAL device
- Modify few memory region size to better match the hardware manual
-----BEGIN PGP SIGNATURE-----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=ktI+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/renesas-20211030' into staging
Renesas SH-4 patches queue
Patches from Zoltan:
- Various clean up to align the code style with the rest of the code base
- QOM'ify the SH_SERIAL device
- Modify few memory region size to better match the hardware manual
# gpg: Signature made Sat 30 Oct 2021 10:05:03 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* remotes/philmd/tags/renesas-20211030: (30 commits)
hw/timer/sh_timer: Remove use of hw_error
hw/timer/sh_timer: Fix timer memory region size
hw/timer/sh_timer: Do not wrap lines that are not too long
hw/timer/sh_timer: Rename sh_timer_state to SHTimerState
hw/intc/sh_intc: Remove unneeded local variable initialisers
hw/intc/sh_intc: Simplify allocating sources array
hw/intc/sh_intc: Avoid using continue in loops
hw/intc/sh_intc: Replace abort() with g_assert_not_reached()
hw/intc/sh_intc: Inline and drop sh_intc_source() function
hw/intc/sh_intc: Use array index instead of pointer arithmetics
hw/intc/sh_intc: Remove excessive parenthesis
hw/intc/sh_intc: Move sh_intc_register() closer to its only user
hw/intc/sh_intc: Drop another useless macro
hw/intc/sh_intc: Rename iomem region
hw/intc/sh_intc: Turn some defines into an enum
hw/intc/sh_intc: Use existing macro instead of local one
hw/char/sh_serial: Add device id to trace output
hw/char/sh_serial: QOM-ify
hw/char/sh_serial: Split off sh_serial_reset() from sh_serial_init()
hw/char/sh_serial: Embed QEMUTimer in state struct
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hw_error function calls abort and is not meant to be used by
devices. Use qemu_log_mask instead to log and ignore invalid accesses.
Also fix format strings to allow dropping type casts of hwaddr and use
__func__ instead of hard coding function name in the message which
were wrong in two cases.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <f818dc3dd2ac8c3b3d53067f316a716d7f9683d8.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The timer unit only has registers that fit in a region 0x30 bytes
long. No need to have the timer region larger than that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b1cd196cf1395a602c7a08a4f858e69e50c446a1.1635550060.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It's more readable to keep things on one line if it fits the length limit.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <97bc2a38991f33fd0c8cc2e4d0a3a29b20c47d1f.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to coding style types should be camel case, also remove
unneded casts from void *.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <d9a9d160c1153a583397e366ab06477f5a31c507.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sh_intc_locate function will either init these or not return so no
need to initialise them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <15e04aa665c68ab5df47bbf505346d413be2fc1c.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use g_new0 instead of g_malloc0 and avoid some unneeded temporary
variable assignments.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <72efc4f2c4ff8b96848d03dca08e4541ee4076f6.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of if !expr continue else do something it is more straight
forward to say if expr then do something, especially if the action is
just a few lines. Remove such uses of continue to make the code easier
to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <0efaa5e7a1a3ee11f82b3bb1942c287576c67f8b.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
All the places that call abort should not happen which is better
marked by g_assert_not_reached.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <039e6a784532f2af27f8adeafdb8e0391722f567.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This function is very simple and provides no advantage. Call sites
become simpler without it so just write it in line and drop the
separate function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <a98d1f7f94e91a42796b7d91e9153a7eaa3d1c44.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Address of element i is one word thus clearer than array + i.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <f49c9b1dee1fcaf374b092d862a6821907d5fcdc.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Drop unneded parenthesis and split up one complex expression to write
it with less brackets so it's easier to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <a48e849e5b803a952ed15a2502cfece2bde68934.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sh_intc_register() function is only used at one place. Move them
together so it's easier to see what's going on.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <49f2742bc67cba7164385fafad204ab1e1bd3a0b.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The INT_REG_PARAMS macro was only used a few times within one function
on adjacent lines and is actually more complex than writing out the
parameters so simplify it by expanding the macro at call sites and
dropping the #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d3bdfdc5ab5ae1c51a6c6c38bde3829a99f85ce5.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename the iomem region to "intc" from "interrupt-controller" which
makes the info mtree output less wide as it is already too wide
because of all the aliases. Also drop the format macro which was only
used twice in close proximity so we can just use the literal string
instead without a macro definition.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <cb6402dab6b44c804142b5cf9af68e6398cb613f.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Turn the INTC_MODE defines into an enum and clean up the function
returning these to make it clearer by removing nested ifs and
superfluous parenthesis. The one remaining #define is a flag which is
moved further apart by changing its value from 8 to 0x80 to leave some
spare bits as this is or-ed with the enum value at some places.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <4adf4e1ac9d2e728e5a536c69e310d77f0c4455a.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The INTC_A7 local macro does the same as the A7ADDR from
include/sh/sh.h so use the latter and drop the local macro definition.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <53f033477c73b7c9b021d36033c590416d6199c7.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Normally there are at least two sh_serial instances. Add device id to
trace messages to make it clear which instance they belong to
otherwise its not possible to tell which serial device is accessed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <cc1f9ff9f4259ae799750e452f8871849c7a104c.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <92902ba34fdf2c8c62232365fbb6531b1036d557.1635541329.git.balaton@eik.bme.hu>
[PMD: Use g_strdup() to initialize DeviceState::id]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of allocating timer with timer_new store it directly in the
state struct. This makes it simpler to free it together with the device.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <fd01eb3720ec32dab06e03019f72f3e177033679.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Replace fprintf with qemu_log_mask LOG_GUEST_ERROR as the intention is
to handle valid accesses in these functions so if we get to these
errors then it's an invalid access. Do not abort as that would allow
the guest to crash QEMU and the practice in other devices is to not do
that just log and ignore the invalid access. While at it also simplify
the complex bit ops to check if a return value was set which can be
done much simpler and clearer.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <6b46045141d6d9cc32e17c223896fa1116384796.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
