d1f6af6 "kvm-irqchip: simplify kvm_irqchip_add_msi_route" was a cleanup
of kvmchip routing configuration, that was mostly intended for x86.
However, it also contains a subtle change in behaviour which breaks EEH[1]
error recovery on certain VFIO passthrough devices on spapr guests. So far
it's only been seen on a BCM5719 NIC on a POWER8 server, but there may be
other hardware with the same problem. It's also possible there could be
circumstances where it causes a bug on x86 as well, though I don't know of
any obvious candidates.
Prior to d1f6af6, both vfio_msix_vector_do_use() and
vfio_add_kvm_msi_virq() used msg == NULL as a special flag to mark this
as the "dummy" vector used to make the host hardware state sync with the
guest expected hardware state in terms of MSI configuration.
Specifically that flag caused vfio_add_kvm_msi_virq() to become a no-op,
meaning the dummy irq would always be delivered via qemu. d1f6af6 changed
vfio_add_kvm_msi_virq() so it takes a vector number instead of the msg
parameter, and determines the correct message itself. The test for !msg
was removed, and not replaced with anything there or in the caller.
With an spapr guest which has a VFIO device, if an EEH error occurs on the
host hardware, then the device will be isolated then reset. This is a
combination of host and guest action, mediated by some EEH related
hypercalls. I haven't fully traced the mechanics, but somehow installing
the kvm irqchip route for the dummy irq on the BCM5719 means that after EEH
reset and recovery, at least some irqs are no longer delivered to the
guest.
In particular, the guest never gets the link up event, and so the NIC is
effectively dead.
[1] EEH (Enhanced Error Handling) is an IBM POWER server specific PCI-*
error reporting and recovery mechanism. The concept is somewhat
similar to PCI-E AER, but the details are different.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1373802
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Gavin Shan <gwshan@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Fixes: d1f6af6a17 ("kvm-irqchip: simplify kvm_irqchip_add_msi_route")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VMState added by this patch preserves correct
loading of the PC speaker device state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090133.6440.65457.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes kvmvapic state change handler.
It clears vmsentry field to allow recreating it
at further vmstate loads.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090127.6440.48793.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new APIC macro to replace APIC_COMMON macro in
hw/intc/apic.c in order to capture access LAPIC in qemu
even if LAPIC is emulated in kvm.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473923759-13912-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the other devices` .realize function name are xxx_realize, except this one.
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The page that was previously linked in the source code and the README file is
no longer available so it now returns a 404 error message.
This puts a previous snapshot from archive.org instead.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add -kernel_irqchip=split
./x86-run x86/eventinj.flat
qemu-system-x86_64 -enable-kvm -machine kernel_irqchip=split -cpu host
-device pc-testdev -device isa-debug-exit,iobase=0xf4,iosize=0x4 -vnc
none -serial stdio -device pci-testdev -kernel x86/eventinj.flat
enabling apic
paging enabled
cr0 = 80010011
cr3 = 7fff000
cr4 = 20
Sending vec 33 and 62 and mask one with TPR
irq1 running
irq1 running
After 33/62 TPR test
FAIL: TPR
irq0 running
irq0 running
Both irq1 and irq0 are executing twice.
kvm_entry: vcpu 0
kvm_exit: reason MSR_WRITE rip 0x401f33 info 0 0
kvm_apic: apic_write APIC_EOI = 0x0
kvm_eoi: apicid 0 vector 62
kvm_msr: msr_write 80b = 0x0
kvm_entry: vcpu 0
kvm_exit: reason PENDING_INTERRUPT rip 0x401f35 info 0 0
kvm_userspace_exit: reason KVM_EXIT_IRQ_WINDOW_OPEN (7)
kvm_inj_virq: irq 62
kvm_entry: vcpu 0
kvm_exit: reason IO_INSTRUCTION rip 0x4016ec info 3fd0008 0
From the trace we can see there is an interrupt window exit
after the first interrupt EOI(irq 62), and the same irq(62)
is injected duplicately after the interrupt window.
QEMU does KVM_INTERRUPT(62) ioctl after KVM exits with
KVM_EXIT_IRQ_WINDOW_OPEN, which QEMU requested while the
guest was printing. The printing calls
serial_update_irq() -> qemu_irq_lower() -> qemu_set_irq() ->
gsi_handler() -> qemu_set_irq() -> pic_irq_request() ->
apic_deliver_pic_intr() -> kvm_handle_interrupt()
kvm_handle_interrupt() does
interrupt_request |= CPU_INTERRUPT_HARD
which later calls cpu_get_pic_interrupt() in kvm_arch_pre_run(),
but that function uses stale information from APIC and injects
62 again. If we synchronized the APIC, then the test would #GP,
because there would be no injectable interrupt in LAPIC or PIC,
so pic_read_irq() would return 15, thinking it was spurious.
This patch fix it by don't touch LAPIC if LAPIC is in kernel.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473832464-3478-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vmware Paravirtual SCSI emulator while processing IO requests
could run into an infinite loop if 'pvscsi_ring_pop_req_descr'
always returned positive value. Limit IO loop to the ring size.
Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473845952-30785-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing IO request in mptsas, it uses g_new to allocate
a 'req' object. If an error occurs before 'req->sreq' is
allocated, It could lead to an OOB write in mptsas_free_request
function. Use g_new0 to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473684251-17476-1-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With an ejected block backend, blk_get_aio_context() would return
qemu_aio_context. In this case don't assert.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even if tray is not open, it can be empty (blk_is_inserted() == false).
Handle both cases correctly by replacing the s->tray_open checks with
blk_is_available(), which is an AND of the two.
Also simplify successive checks of them into blk_is_available(), in a
couple cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows uses object properties to determine the size of a file, so to
add object properties, we must also add a minimum set of new commands
and object properties. Most object properties are data that we already
have, except for the unique persistant object identifier. Windows
doesn't use this property, it seems, so we can cheat a bit and just use
the object handle for it.
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Message-id: a741d0dd380cd7eb1695e1eb34ee6f341183f20a.1470477265.git.109lozanoi@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MTP requires that if a file is larger than 4gb or if sending data larger
than 4gb, that the length field be set to 0xFFFFFFFF.
Also widened a couple variables to prevent overflow errors.
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Message-id: 01ad8ec7775f58575801ac3f13716f553a16815e.1470477265.git.109lozanoi@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Load the LAPIC state during post_load (rather than when the CPU
starts).
This allows an interrupt to be delivered from the ioapic to
the lapic prior to cpu loading, in particular the RTC that starts
ticking as soon as we load it's state.
Fixes a case where Windows hangs after migration due to RTC interrupts
disappearing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ISA DMA controller needs to be wired up to the ISA bus by
isa_bus_dma() to actually work.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1472660151-19517-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 8cc46787b5.
It turns out that cmd->frame can be NULL and thus the commit
can cause a SIGSEGV
Reported-by: Holger Schranz <holger@fam-schranz.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_console_data() method in sclpconsole-lm.c checks
whether the return value of qemu_chr_fe_write() has the
value of -EAGAIN and if so then increments the buffer offset
by the value of EAGAIN. Fortunately qemu_chr_fe_write() will
never return EAGAIN directly, rather it returns -1 with
errno set to EAGAIN, so this broken code path was not
reachable. The behaviour on EAGAIN was stil bad though,
causing the write_console_data() to busy_wait repeatedly
calling qemu_chr_fe_write() with no sleep between iters.
Just remove all this loop logic and replace with a call
to qemu_chr_fe_write_all().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The continue_send() method in ipmi_bmc_extern.c directly
assigns the return value of qemu_chr_fe_write() to the
variable tracking the I/O buffer offset. This ignores the
possibility that the return value could be -1 and so will
cause I/O go backwards on EAGAIN. Fortunately 'outpos' is
unsigned, so can't go negative - it will become MAX_INT
which will cause the loop to stop, and avoid an accidental
out of bounds array access.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In PVSCSI paravirtual SCSI bus, pvscsi_convert_sglist can take a very
long time or go into an infinite loop due to two different bugs:
1) the request descriptor data length is defined to be 64 bit. While
building SG list from a request descriptor, it gets truncated to 32bit
in routine 'pvscsi_convert_sglist'. This could lead to an infinite loop
situation large 'dataLen' values when data_length is cast to uint32_t and
chunk_size becomes always zero. Fix this by removing the incorrect cast.
2) pvscsi_get_next_sg_elem can be called arbitrarily many times if the
element has a zero length. Get out of the loop early when this happens,
by introducing an upper limit on the number of SG list elements.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473108643-12983-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These issues cause respectively a QEMU crash and a leak of 2 bytes of
stack. They were discovered by VictorV of 360 Marvel Team.
Reported-by: Tom Victor <i-tangtianwen@360.cm>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When LSI SAS1068 Host Bus emulator builds configuration page
headers, mptsas_config_pack() should assert that the size
fits in a byte. However, the size is expressed in 32-bit
units, so up to 1020 bytes fit. The assertion was only
allowing replies up to 252 bytes, so fix it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1472645167-30765-2-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the page count for these rings to
an arbitrary value, leading to infinite loop or OOB access.
Add check to avoid it.
Reported-by: Tom Victor <vv474172261@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1472626169-12989-1-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Openstack Cinder assigns volume a 36 characters uuid as serial.
QEMU will shrinks the uuid to 20 characters, which does not match
the original uuid.
Note that there is no limit to the length of the serial number in
the SCSI spec. 20 was copy-pasted from virtio-blk which in turn was
copy-pasted from ATA; 36 is even more arbitrary. However, bumping it
up too much might cause issues (e.g. 252 seems to make sense because
then the maximum amount of returned data is 256; but who knows there's
no off-by-one somewhere for such a nicely rounded number).
Signed-off-by: Rony Weng <ronyweng@synology.com>
Message-Id: <1472457138-23386-1-git-send-email-ronyweng@synology.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
slave:~/.xie/qemu-colo # gcc --version
gcc (SUSE Linux) 4.3.4 [gcc-4_3-branch revision 152973]
slave:~/.xie/qemu-colo # make -j8
CC hw/net/e1000e_core.o
hw/net/e1000e_core.c:56: warning: ‘e1000e_set_interrupt_cause’ declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of ‘e1000e_set_interrupt_cause’ was here
LINK x86_64-softmmu/qemu-system-x86_64
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Display the slot number of mhp_pc_dimm_assigned_slot()
using "%d" without the "0x".
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the xhci uses msix, it doesn't free the corresponding
memory, thus leading a memory leak. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 57d7d2e0.d4301c0a.d13e9.9a55@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The old one is confusing with @virtio_device_info in virtio.c,
so make it more appropriate.
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Message-id: 1470214147-32560-1-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can't hotplug display adapters in qemu, tag virtio-gpu-pci
accordingly (virtio-vga already has this).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1473319037-27645-1-git-send-email-kraxel@redhat.com
When processing svga command DEFINE_CURSOR in vmsvga_fifo_run,
the computed BITMAP and PIXMAP size are checked against the
'cursor.mask[]' and 'cursor.image[]' array sizes in bytes.
Correct these checks to avoid OOB memory access.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1473338754-15430-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
