Bitmap lock/unlock were added to bdrv_enable_dirty_bitmap in
8b1402ce80, but some places were not updated correspondingly, which
leads to trying to take this lock twice, which is dead-lock. Fix this.
Actually, iotest 199 (about dirty bitmap postcopy migration) is broken
now, and this fixes it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add _locked version of bdrv_enable_dirty_bitmap, to fix dirty bitmap
migration in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-33-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-32-armbru@redhat.com>
qmp_greeting() offers capabilities to the client, and
qmp_qmp_capabilities() accepts or denies capabilities requested by the
client. The two compute the set of available capabilities
independently. Not nice.
Clean this up as follows. Compute available capabilities just once in
monitor_qmp_caps_reset(), and store them in Monitor member
qmp.capab_offered[]. Have qmp_greeting() and qmp_qmp_capabilities()
use that. Both are now oblivious of capability details.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-31-armbru@redhat.com>
qobject_from_jsonf() aborts on error, unlike qobject_from_jsonv(),
which returns null. Since all remaining users of qobject_from_jsonf()
cope fine with null, change it to return null.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-30-armbru@redhat.com>
There's just one use of qobject_from_jsonf() to parse a JSON object
left: timestamp_put(). Switch it to qdict_from_jsonf_nofail().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-29-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-28-armbru@redhat.com>
monitor_qmp_respond() takes both a response object and an error
object. If an error object is non-null, the response object must be
null, and the response is built from the error object.
Of the two callers, one always passes a null response object, and one
a null error object. Move building the response object from the error
object to the latter, and drop the error object parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-27-armbru@redhat.com>
get_qmp_greeting() returns a QDict * as QObject *. It's caller
converts it right back.
Return QDict * instead. While there, rename to qmp_greeting().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-26-armbru@redhat.com>
monitor_json_emitter() and monitor_json_emitter_raw() are
unnecessarily general: they can send arbitrary JSON values, even
though we only ever use them for QMP, which may send only JSON
objects.
Specialize the argument from QObject * to QDict *, and rename to
qmp_queue_response(), qmp_send_response().
All callers but one lose an upcast. The lone exception gains a
downcast; the next commit will get rid of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-25-armbru@redhat.com>
By using the more specific type, we get fewer downcasts. The
downcasts are safe, but not obviously so, at least not locally.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object. Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
Many uses of qobject_from_jsonf() convert JSON objects. Create new
convenience function qdict_from_jsonf_nofail() that includes the
conversion to QDict. The next few commits will put it to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-22-armbru@redhat.com>
Wrapping global variables in a struct without a use for the wrapper
struct buys us nothing but longer lines. Unwrap them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-21-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-20-armbru@redhat.com>
handle_qmp_command() reports JSON syntax errors right away. This is
wrong when OOB is enabled, because the errors can "jump the queue"
then.
The previous commit fixed the same bug for semantic errors, by
delaying the checking until dispatch. We can't delay the checking, so
delay the reporting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-19-armbru@redhat.com>
handle_qmp_command() reports certain errors right away. This is wrong
when OOB is enabled, because the errors can "jump the queue" then, as
the previous commit demonstrates.
To fix, we need to delay errors until dispatch. Do that for semantic
errors, mostly by reverting ill-advised parts of commit cf869d5317
"qmp: support out-of-band (oob) execution". Bonus: doesn't run
qmp_dispatch_check_obj() twice, once in handle_qmp_command(), and
again in do_qmp_dispatch(). That's also due to commit cf869d5317.
The next commit will fix queue jumping for syntax errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-18-armbru@redhat.com>
When OOB is enabled, out-of-band commands are executed right away,
everything else is queued. This lets out-of-band commands "jump the
queue".
However, certain errors are always reported right away, and therefore
can jump the queue even when the erroneous input does not request
out-of-band execution. These errors are pretty unlikely to occur in
production, but it's wrong all the same. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180703085358.13941-17-armbru@redhat.com>
Change monitor_qmp_dispatch_one() to take its parameters unwrapped,
move monitor_resume() to the one caller that needs it, rename the
function to monitor_qmp_dispatch().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-16-armbru@redhat.com>
monitor_qmp_dispatch_one() frees a QMPRequest manually, because it
needs to keep a reference to ->id. Premature optimization. Take an
additional reference so we can use qmp_request_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-15-armbru@redhat.com>
Commit 71da4667db "monitor: separate QMP parser and dispatcher" moved
the handle_qmp_command tracepoint from handle_qmp_command() to
monitor_qmp_dispatch_one(). This delays tracing from enqueue time to
dequeue time. Revert that. Dequeue remains adequately visible via
tracepoint monitor_qmp_cmd_in_band.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-14-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
However, it failed to reject unknown members of "control". For
instance, in QMP command
{"execute": "query-name", "id": 42, "control": {"crap": true}}
"crap" gets silently ignored.
Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob". Simpler code, simpler interface.
An out-of-band command
{"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}
becomes
{"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control". Fix that.
Out-of-band execution in a monitor that doesn't support it now fails
with
{"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}
instead of
{"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}
The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.
The new description is a bit unspecific, but it'll do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-11-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" changed
how we check "id":
Note that in the patch I exported qmp_dispatch_check_obj() to be
used to check the request earlier, and at the same time allowed
"id" field to be there since actually we always allow that.
The part after "and" is ill-advised: it makes qemu-ga accept and
ignore "id". Revert.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-10-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-9-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" made
"id" mandatory for all commands when the client accepted capability
"oob". This is rather onerous when you play with QMP by hand, and
unnecessarily so: only out-of-band commands need an ID for reliable
matching of response to command.
Revert that part of commit cf869d5317 for now, but have documentation
advise on the need to use "id" with out-of-band commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703085358.13941-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-7-armbru@redhat.com>
tests/qmp-test tests an out-of-band command overtaking a slow in-band
command. To do that, it needs:
1. An in-band command that *reliably* takes long enough to be
overtaken.
2. An out-of-band command to do the overtaking.
3. To avoid delays, a way to make the in-band command complete quickly
after it was overtaken.
To satisfy these needs, commit 469638f9cb provides the rather
peculiar oob-capable QMP command x-oob-test:
* With "lock": true, it waits for a global semaphore.
* With "lock": false, it signals the global semaphore.
To satisfy 1., the test runs x-oob-test in-band with "lock": true.
To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false.
Note that waiting for a semaphore violates the rules for oob-capable
commands. Running x-oob-test with "lock": true hangs the monitor
until you run x-oob-test with "lock": false on another monitor (which
you might not have set up).
Having an externally visible QMP command that may hang the monitor is
not nice. Let's apply a little more ingenuity to the problem. Idea:
have an existing command block on reading a FIFO special file, unblock
it by opening the FIFO for writing.
For 1., use
{"execute": "blockdev-add", "id": ID1,
"arguments": {
"driver": "blkdebug", "node-name": ID1, "config": FIFO,
"image": { "driver": "null-co"}}}
where ID1 is an arbitrary string, and FIFO is the name of the FIFO.
For 2., use
{"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}}
where ID2 is a different arbitrary string. Since there's no migration
to pause, the command will fail, but that's fine; instant failure is
still a test of out-of-band responses overtaking in-band commands.
For 3., open FIFO for writing.
Drop QMP command x-oob-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-6-armbru@redhat.com>
[Error checking tweaked]
Events are broadcast to all monitors. If another monitor's client has
a command with the same ID in flight, the event will incorrectly claim
that command was dropped. This must be fixed before out-of-band
execution can graduate from "experimental".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-5-armbru@redhat.com>
OOB documentation is spread over qmp-spec.txt sections 2.2.1
Capabilities and 2.3 Issuing Commands. The amount of detail is a bit
distracting there. Move the meat of the matter to new section 2.3.1
Out of band execution.
Throw in a few other improvements while there:
* 2.2 Server Greeting: Drop advice to search entire capabilities
array; should be obvious.
* 3. QMP Examples
- 3.1 Server Greeting: Update greeting to the one we expect for the
release. Now shows capability "oob". Update qmp-intro.txt
likewise.
- 3.2 Capabilities negotiation: Show client accepting capability
"oob".
- 3.7 Out-of-band execution: New.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-4-armbru@redhat.com>
[Whitespace tidied up]
bios_support_mode verifies if the guest has support for a certain
suspend mode but it doesn't inform back which suspend tool
provides it. The caller, guest_suspend, executes all suspend
strategies in order again.
After adding systemd suspend support, bios_support_mode now will
verify for support for systemd, then pmutils, then Linux sys state
file. In a worst case scenario where both systemd and pmutils isn't
supported but Linux sys state is:
- bios_supports_mode will check for systemd, then pmutils, then
Linux sys state. It will tell guest_suspend that there is support,
but it will not tell who provides it;
- guest_suspend will try to execute (and fail) systemd suspend,
then pmutils suspend, to only then use the Linux sys suspend.
The time spent executing systemd and pmutils suspend was wasted
and could be avoided, but only bios_support_mode knew it but
didn't inform it back.
A quicker approach is to nuke bios_supports_mode and control
whether we found support at all with a bool flag inside
guest_suspend. guest_suspend will search for suspend support
and execute it as soon as possible. If the a given suspend
mechanism fails, continue to the next. If no suspend
support is found, the "not supported" message is still being
sent back to the user.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
pmutils isn't being supported by newer OSes like Fedora 27
or Mint. This means that the only suspend option QGA offers
for these guests are writing directly into the Linux sys state
file. This also means that QGA also loses the ability to do
hybrid suspend in those guests - this suspend mode is only
available when using pmutils.
Newer guests can use systemd facilities to do all the suspend
types QGA supports. The mapping in comparison with pmutils is:
- pm-hibernate -> systemctl hibernate
- pm-suspend -> systemctl suspend
- pm-suspend-hybrid -> systemctl hybrid-sleep
To discover whether systemd supports these functions, we inspect
the status of the services that implements them.
With this patch, we can offer hybrid suspend again for newer
guests that do not have pmutils support anymore.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is a cleanup of the resulting code after detaching
pmutils and Linux sys state file logic:
- remove the SUSPEND_MODE_* macros and use an enumeration
instead. At the same time, drop the switch statements
at the start of each function and use the enumeration
index to get the right binary/argument;
- create a new function called run_process_child(). This
function uses g_spawn_sync() to execute a shell command,
returning the exit code. This is a common operation in the
pmutils functions and will be used in the systemd implementation
as well, so this function will avoid code repetition.
There are more places inside commands-posix.c where this new
run_process_child function can also be used, but one step
at a time.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
*check/propagate local_err before setting errp directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Following the same logic of the previous patch, let's also
decouple the suspend logic from guest_suspend into specialized
functions, one for each strategy we support at this moment.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In bios_supports_mode there is a verification to assert if
the chosen suspend mode is supported by the pmutils tools and,
if not, we see if the Linux sys state files supports it.
This verification is done in the same function, one after
the other, and it works for now. But, when adding a new
suspend mechanism that will not necessarily follow the same
return 0 or 1 logic of pmutils, this code will be hard
to deal with.
This patch decouple the two existing logics into their own
functions, pmutils_supports_mode and linux_sys_state_supports_mode,
which in turn are used inside bios_support_mode. The existing
logic is kept but now it's easier to extend it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To be able to add new suspend mechanisms we need to detach
the existing QMP functions from the current implementation
specifics.
At this moment we have functions such as qmp_guest_suspend_ram
calling bios_suspend_mode and guest_suspend passing the
pmutils command and arguments as parameters. This patch
removes this logic from the QMP functions, moving them to
the respective functions that will have to deal with which
binary to use.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Iterate over the PCI bridges to lookup the PCI device associated with
the block device.
This allows to lookup the driver under the following syspath:
/sys/devices/pci0000:00/0000:00:02.2/0000:03:00.0/virtio2/block/vda/vda3
It also works with an "old-style" Q35 libvirt hierarchy: root complex
-> DMI-PCI bridge -> PCI-PCI bridge -> virtio controller, ex:
/sys/devices/pci0000:00/0000:00:03.0/0000:01:01.0/0000:02:01.0/virtio1/block/vda/vda3
The setup can be reproduced with the following qemu command line
(Thanks Marcel for help):
qemu-system-x86_64 -M q35 \
-device i82801b11-bridge,id=dmi2pci_bridge,bus=pcie.0
-device pci-bridge,id=pci_bridge,bus=dmi2pci_bridge,addr=0x1,chassis_nr=1
-device virtio-blk-pci,scsi=off,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,bus=pci_bridge,addr=0x1
For consistency with other syspath-related debug messages, replace a
\"%s\" in the message with '%s'.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Issue: When upgrading qemu-ga using the msi from an old version
to a newer one, the upgrade is not allowed by the msi
showing this error message "Another version of this product
is already installed."
BZ# 1536331: https://bugzilla.redhat.com/show_bug.cgi?id=1536331
Fix: For the upgrade to be allowed by the msi the WiX file must
provide three things:
1. Changing product's Id. (assigning it to "*")
2. Constant product's UpgradeId. (exists)
3. Changing version. (exists)
Reference: http://wixtoolset.org/documentation/manual/v3/howtos/updates/major_upgrade.html
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The documentation for kernel-version and kernel-release on Windows was
swapped.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These commands did not get their tests in the original commits:
- guest-get-host-name
- guest-get-timezone
- guest-get-users
Trivial tests that mostly only call the commands were added.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* replace QDECREF() with qobject_unref()
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>