A device will never be finalized as long as it has a reference from
other devices that sit on its buses. To ensure that the references
go away, deassociate a bus from its children in the unparent callback
for the bus.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each device has a reference through the BusChild. This reference
was not accounted for, add it now.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid that the object disappears after it's deleted from the QOM
composition tree, in case that was the only reference to it.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove knowledge of QOM innards. The common part of pci_bus_new and
pci_bus_new_inplace is moved to a new function pci_bus_init.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make it clear that no BUS() macro is needed in the callers (in fact it
wouldn't work because the object has not been initialized yet with the
right class).
Suggested-by: Andreas Faerber <afaerber@suse.de>
Acked-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the common part to qbus_realize.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
command:
qemu-system-x86_64 -hda disk.img -smp 32 --enable-kvm
error:
Number of SMP cpus requested (32) exceeds max cpus supported by KVM (16)
failed to initialize KVM: Invalid argument
No accelerator found!
well, it did find kvm, but failed to init,
so message "No accelerator found!" is confusing,
this commit remove the confusing error message.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We've seen this repeatedly in buildbot but I can now reliably
reproduce it myself too. With a few hundred runs of 'make check',
qemu-system-sparc will hang consuming 100% CPU. I've attached GDB
to the hung process and unfortunately, I can't get anything useful
out of GDB (RIP is not a valid simple and there is nothing else on
the stack).
At any rate, since this only manifests in qemu-system-sparc and it
doesn't appear to be a qtest specific problem, I think we should
disable it until the problem is resolved.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Kevin Wolf (7) and others
# Via Stefan Hajnoczi
* stefanha/block:
block/raw-posix: Build fix for O_ASYNC
vmdk: Allow space in file name
parallels: Fix bdrv_open() error handling
dmg: Use g_free instead of free
dmg: Fix bdrv_open() error handling
vpc: Fix bdrv_open() error handling
cloop: Fix bdrv_open() error handling
bochs: Fix bdrv_open() error handling
sheepdog: pass vdi_id to sheep daemon for sd_close()
vmdk: Allow selecting SCSI adapter in image creation
block: Adds mirroring tests for resized images
block: Fix is_allocated_above with resized files
qemu-iotests: Add regression test for b7ab0fea
This patch add migration support for multiqueue virtio-net. Instead of bumping
the version, we conditionally send the info of multiqueue only when the device
support more than one queue to maintain the backward compatibility.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch implements both userspace and vhost support for multiple queue
virtio-net (VIRTIO_NET_F_MQ). This is done by introducing an array of
VirtIONetQueue to VirtIONet.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue virtio-net, the first step is to separate the virtqueue
related fields from VirtIONet to a new structure VirtIONetQueue. The following
patches will add an array of VirtIONetQueue to VirtIONet based on this patch.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a queue_index to VirtQueue and a helper to fetch it, this could be used by
multiqueue supported device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some device (such as virtio-net) needs the ability to destroy or re-order the
virtqueues, this patch adds a helper to do this.
Signed-off-by: Jason Wang <jasowang>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch lets vhost support multiqueue. The idea is simple, just launching
multiple threads of vhost and let each of vhost thread processing a subset of
the virtqueues of the device. After this change each emulated device can have
multiple vhost threads as its backend.
To do this, a virtqueue index were introduced to record to first virtqueue that
will be handled by this vhost_net device. Based on this and nvqs, vhost could
calculate its relative index to setup vhost_net device.
Since we may have many vhost/net devices for a virtio-net device. The setting of
guest notifiers were moved out of the starting/stopping of a specific vhost
thread. The vhost_net_{start|stop}() were renamed to
vhost_net_{start|stop}_one(), and a new vhost_net_{start|stop}() were introduced
to configure the guest notifiers and start/stop all vhost/vhost_net devices.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.
The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.
Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.
A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduces a helper tap_get_ifname() to get the device name of tap
device. This is needed when ifname is unspecified in the command line and qemu
were asked to create tap device by itself. In this situation, the name were
allocated by kernel, so if multiqueue is asked, we need to fetch its name after
creating the first queue.
Only linux has this support since it's the only platform that supports
multiqueue tap.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduce a new bit - enabled in TAPState which tracks whether a
specific queue/fd is enabled. The tap/fd is enabled during initialization and
could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform
specific helpers to do the real work. Polling of a tap fd can only done when
the tap was enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch add basic multiqueue support for Linux. When multiqueue is needed, we
will first check whether kernel support multiqueue tap before creating more
queues. Two new functions tap_fd_enable() and tap_fd_disable() were introduced
to enable and disable a specific queue. Since the multiqueue is only supported
in Linux, return error on other platforms.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch factors out the common initialization of tap into a new helper
net_init_tap_one(). This will be used by multiqueue tap patches.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Import multiqueue constants from if_tun.h from 3.8-rc3. A new ifr flag
IFF_MULTI_QUEUE were introduced to create a multiqueue backend by calling
TUNSETIFF with the this flag and with the same interface name many times.
A new ioctl TUNSETQUEUE were introduced. When doing this ioctl with
IFF_DETACH_QUEUE, the queue were disabled in the linux kernel. When doing this
ioctl with IFF_ATTACH_QUEUE, the queue were enabled in the linux kernel.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.
After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To allow allocating an array of NetClientState and free it once, this patch
introduces destructor of NetClientState. Which could do type specific free,
which could be used by multiqueue to free the array once.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch separates the setup of NetClientState from its allocation, this will
allow allocating an arrays of NetClientState and does the initialization one by
one which is what multiqueue needs.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In multiqueue, all NetClientState that belongs to the same netdev or nic has the
same id. So this patches introduces an helper qemu_find_net_clients_except()
which finds all NetClientState with the same id. This will be used by multiqueue
networking.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since HWADDR_PRIx is always the same now, use %016 for TARGET_PPC64 and
%08 for common code. This may slightly change the ppc64 debug output.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When running "make check" with gcov enabled, we get the following
message:
hw/tmp105.gcda:cannot open data file, assuming not executed
The problem happens because:
* tmp105-test exits before QEMU exits, because waitpid() at
qtest_quit() fails;
* waitpid() fails because there's another process already
waiting for the QEMU process;
* The process that is already waiting for QEMU is the child created by
qtest_init() to run system();
* qtest_quit() is incorrectly waiting for the QEMU PID directly instead
of the child created by qtest_init().
This fixes the problem by sending SIGTERM to QEMU, but waiting for the
child process created by qtest_init() (that exits immediately after QEMU
exits).
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
DeviceState::parent_bus is document as private and should be accessed
through qdev_get_parent_bus(). Use a DEVICE() cast instead of accessing
ISADevice's qdev field directly. Use ISA_BUS() in place of DO_UPCAST().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not being used in hot paths and is obsoleted by I2C_SLAVE()
QOM cast macro. Clean it up using a scripted conversion, so that it
doesn't get used in new code.
Some of its callers were combining it with FROM_I2C_SLAVE() macro, which
is equally obsolete but needs to be replaced in a type-specific way.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The automatic drop of -Werror during the RC phases has in the past led
to warnings creeping into submaintainer trees.
Last QEMU Summit it was concluded that -Werror should stay on and
enabled only as part of the release process.
To relieve our release manager, instead of always enabling -Werror or
doing some number magic, let's enable it depending on whether a .git/
directory exists in the source tree.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 84dd212024.
I'm not sure what issue the original commit was meant to fix, or if
the logic is actually wrong, but it causes e1000 to stop working
after a guest issues a reset.
>From what I can tell a guest with an e1000 nic has no way of changing
the link status, as far as it's NetClient peer is concerned, except
in the auto-negotiation path, so with this patch in place there's no
recovery after a reset, since the link goes down and stays that way.
Revert this patch now to fix the bigger problem, and handle any
lingering issues with a follow-up.
Reproduced/tested with qemu-jeos and Ubuntu 12.10.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Orit Wasserman
# Via Juan Quintela
* quintela/migration.next:
Fix error message in migrate_set_capability HMP command
Allow XBZRLE decoding without enabling the capability
Fix example for query-migrate-capabilities
Add XBZRLE testing
Move XBZRLE encoding code to a separate file to allow testing
# By Andreas Färber
# Via Alexander Graf
* agraf/s390-for-upstream:
target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()
target-s390x: Clean up cpu_inject_*() signatures
target-s390x: Fix debug output
target-s390x: Fix debug output (continued)
# By Andreas Färber (2) and Alexander Graf (1)
# Via Alexander Graf
* agraf/ppc-for-upstream:
target-ppc: Fix build for PPC_DEBUG_DISAS
target-ppc: Fix unused variable warning for FLUSH_ALL_TLBS
PPC: Unify dcbzl code path
Commit eeb6b45d48 (block: raw-posix image
file reopen) broke the build on OpenIndiana.
illumos has no O_ASYNC. Exclude it from flags to be compared
and instead assert that it is not set where defined.
Cf. e61ab1da7e for qemu-ga.
Cc: qemu-stable@nongnu.org (1.3.x)
Cc: Jeff Cody <jcody@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The previous scanf() format string stopped parsing the file name on the
first white white space, which seems to be allowed at least by VMware
Workstation.
Change the format string to collect everything between the first and
second quote as the file name, disallowing line breaks.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors. Hey, no memory leak to fix here
while we're touching it!
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The buffers are allocated with g_(re)alloc, so use g_free to free them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors and add error checks in some
places that didn't have one. Passing things by reference requires more
correct typing, replaced a few off_ts therefore - with a 32-bit off_t
this is even a fix for truncation bugs.
While touching the code, fix even some more memory leaks than in the
other drivers...
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors. While touching the
code, fix a memory leak.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>