sysbus_add_io() just wraps memory_region_add_subregion() while also
obscuring where the memory is attached. So use
memory_region_add_subregion() directly and attach it to the existing
memory region s->mch.address_space_io which is set as an alias to
get_system_io() by the q35 machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
sysbus_add_io() just wraps memory_region_add_subregion() while also
obscuring where the memory is attached. So use
memory_region_add_subregion() directly and attach it to the existing
memory region s->bus->address_space_io which is set as an alias to
get_system_io() by the pc machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213162004.2797-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
1. The vIOMMU support will make vDPA can work in IOMMU mode. This
will fix security issues while using the no-IOMMU mode.
To support this feature we need to add new functions for IOMMU MR adds and
deletes.
Also since the SVQ does not support vIOMMU yet, add the check for IOMMU
in vhost_vdpa_dev_start, if the SVQ and IOMMU enable at the same time
the function will return fail.
2. Skip the iova_max check vhost_vdpa_listener_skipped_section(). While
MR is IOMMU, move this check to vhost_vdpa_iommu_map_notify()
Verified in vp_vdpa and vdpa_sim_net driver
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-5-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The unmap ioctl doesn't accept a full 64-bit span. So need to
add check for the section's size in vhost_vdpa_listener_region_del().
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In trace_vhost_vdpa_listener_region_del, the value for llend
should change to int128_get64(int128_sub(llend, int128_one()))
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-3-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support vIOMMU in vdpa, need to exposed the function
vhost_dev_has_iommu, vdpa will use this function to check
if vIOMMU enable.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure op_info is not NULL in case of QCRYPTODEV_BACKEND_ALG_SYM algtype.
Fixes: 0e660a6f90 ("crypto: Introduce RSA algorithm")
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Yiming Tao <taoym@zju.edu.cn>
Message-Id: <20230509075317.1132301-1-mcascell@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: zhenwei pi<pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The commit 93a97dc520 ("virtio-net: enable vq reset feature") enables
unconditionally vq reset feature as long as the device is emulated.
This makes impossible to actually disable the feature, and it causes
migration problems from qemu version previous than 7.2.
The entire final commit is unneeded as device system already enable or
disable the feature properly.
This reverts commit 93a97dc520.
Fixes: 93a97dc520 ("virtio-net: enable vq reset feature")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230504101447.389398-1-eperezma@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's just support 512 memslots on x86-64 and aarch64 as well. The maximum
number of ACPI slots (256) is no longer completely expressive ever since
we supported virtio-based memory devices. Further, we're completely
ignoring other memslots used outside of memory device context, such as
memslots used for boot memory.
Note that the vhost memslot limit in the kernel is usually configured to
be 509. With this change, we prepare vhost-user on the QEMU side to be
closer to that limit, to eventually support ~512 memslots in most vhost
implementations and have less "surprises" when cold/hotplugging vhost
devices while also consuming more memslots than we're currently used to
by memory devices (e.g., once virtio-mem starts using multiple memslots).
Note that most vhost-user implementations only support a small number of
memslots so far, which we can hopefully improve in the near future.
We'll leave the PPC special-case as is for now.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230503184144.808478-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allowing guests to read unplugged memory simplified the bring-up of
virtio-mem in Linux guests -- which was limited to x86-64 only. On arm64
(which was added later), we never had legacy guests and don't even allow
to configure it, essentially always having "unplugged-inaccessible=on".
At this point, all guests we care about
should be supporting VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, so let's
change the default for the 8.1 machine.
This change implies that also memory that supports the shared zeropage
(private anonymous memory) will now require
VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE in the driver in order to be usable by
the guest -- as default, one can still manually set the
unplugged-inaccessible property.
Disallowing the guest to read unplugged memory will be important for
some future features, such as memslot optimizations or protection of
unplugged memory, whereby we'll actually no longer allow the guest to
even read from unplugged memory.
At some point, we might want to deprecate and remove that property.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230503182352.792458-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since it's implementation on v8.0.0-rc0, having the PCI_ERR_UNCOR_MASK
set for machine types < 8.0 will cause migration to fail if the target
QEMU version is < 8.0.0 :
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10a read: 40 device: 0 cmask: ff wmask: 0 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load e1000e:parent_obj
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:02.0/e1000e'
qemu-system-x86_64: load of migration failed: Invalid argument
The above test migrated a 7.2 machine type from QEMU master to QEMU 7.2.0,
with this cmdline:
./qemu-system-x86_64 -M pc-q35-7.2 [-incoming XXX]
In order to fix this, property x-pcie-err-unc-mask was introduced to
control when PCI_ERR_UNCOR_MASK is enabled. This property is enabled by
default, but is disabled if machine type <= 7.2.
Fixes: 010746ae1d ("hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230503002701.854329-1-leobras@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1576
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Setting the VIRTIO Device Status Field to 0 resets the device. The
device's state is lost, including the vring configuration.
vhost-user.c currently sends SET_STATUS 0 before GET_VRING_BASE. This
risks confusion about the lifetime of the vhost-user state (e.g. vring
last_avail_idx) across VIRTIO device reset.
Eugenio Pérez <eperezma@redhat.com> adjusted the order for vhost-vdpa.c
in commit c3716f260b ("vdpa: move vhost reset after get vring base")
and in that commit description suggested doing the same for vhost-user
in the future.
Go ahead and adjust vhost-user.c now. I ran various online code searches
to identify vhost-user backends implementing SET_STATUS. It seems only
DPDK implements SET_STATUS and Yajun Wu <yajunw@nvidia.com> has
confirmed that it is safe to make this change.
Fixes: commit 923b8921d2 ("vhost-user: Support vhost_dev_start")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cindy Lu <lulu@redhat.com>
Cc: Yajun Wu <yajunw@nvidia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501230409.274178-1-stefanha@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230515125229.44836-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fix over-80 lines and missing curly brackets for if-operators, which
are required by QEMU coding style.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230515125229.44836-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Currently i386 QEMU generates MADT revision 3, and reports
MADT revision 1. Set .revision to 3 to match reality.
Link: https://lore.kernel.org/linux-acpi/20230327191026.3454-1-eric.devolder@ora
cle.com/T/#t
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230517162545.2191-3-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This commit enables each CXL Type-3 device to contain one volatile
memory region and one persistent region.
Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]
The existing [memdev] property has been deprecated and will default the
memory region to a persistent memory region (although a user may assign
the region to a ram or file backed region). It cannot be used in
combination with the new [persistent-memdev] property.
Partitioning volatile memory from persistent memory is not yet supported.
Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped
at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accessors prefered over direct use of int128_get64() as they
clamp out of range values. None are expected here but
cleaner to always use the accessor than mix and match.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
The hardware clearing the commit bit is not spec compliant.
Clearing of committed bit when commit is cleared is not specifically
stated in the CXL spec, but is the expected (and simplest) permitted
behaviour so use that for QEMU emulation.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
v2: Picked up tags.
Message-Id: <20230421135906.3515-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not a real problem yet as all supported architectures are
little endian, but continue to tidy these up when touching
code for other reasons.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421135906.3515-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not clear what intent was here, but probably based on a misunderstanding
of what these guards are for.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421135906.3515-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The failure paths in CDAT file loading did not clear up properly.
Change to using g_auto_free and a local pointer for the buffer to
ensure this function has no side effects on error.
Also drop some unnecessary checks that can not fail.
Cleanup properly after a failure to load a CDAT file.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421132020.7408-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Open file descriptor not closed in error paths. Fix by replace
open coded handling of read of whole file into a buffer with
g_file_get_contents()
Fixes: aba578bdac ("hw/cxl: CDAT Data Object Exchange implementation")
Signed-off-by: Zeng Hao <zenghao@kylinos.cn>
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Jonathan Cameron via <qemu-devel@nongnu.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Changes since v5:
- Drop if guard on g_free() as per checkpatch warning.
Message-Id: <20230421132020.7408-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU invokes vhost_svq_add() when adding a guest's element
into SVQ. In vhost_svq_add(), it uses vhost_svq_available_slots()
to check whether QEMU can add the element into SVQ. If there is
enough space, then QEMU combines some out descriptors and some
in descriptors into one descriptor chain, and adds it into
`svq->vring.desc` by vhost_svq_vring_write_descs().
Yet the problem is that, `svq->shadow_avail_idx - svq->shadow_used_idx`
in vhost_svq_available_slots() returns the number of occupied elements,
or the number of descriptor chains, instead of the number of occupied
descriptors, which may cause wrapping in SVQ descriptor ring.
Here is an example. In vhost_handle_guest_kick(), QEMU forwards
as many available buffers to device by virtqueue_pop() and
vhost_svq_add_element(). virtqueue_pop() returns a guest's element,
and then this element is added into SVQ by vhost_svq_add_element(),
a wrapper to vhost_svq_add(). If QEMU invokes virtqueue_pop() and
vhost_svq_add_element() `svq->vring.num` times,
vhost_svq_available_slots() thinks QEMU just ran out of slots and
everything should work fine. But in fact, virtqueue_pop() returns
`svq->vring.num` elements or descriptor chains, more than
`svq->vring.num` descriptors due to guest memory fragmentation,
and this causes wrapping in SVQ descriptor ring.
This bug is valid even before marking the descriptors used.
If the guest memory is fragmented, SVQ must add chains
so it can try to add more descriptors than possible.
This patch solves it by adding `num_free` field in
VhostShadowVirtqueue structure and updating this field
in vhost_svq_add() and vhost_svq_get_buf(), to record
the number of free descriptors.
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230509084817.3973-1-yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
* target/i386: new features
* target/i386: AVX fixes
* configure: create a python venv unconditionally
* meson: bump to 0.63.0 and move tests from configure
* meson: Pass -j option to sphinx
* drop support for Python 3.6
* fix check-python-tox
* fix "make clean" in the source directory
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRmDYQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOXSwf/WKmYPe09yHfxfVSFsSz83QpB3e+f
KJx6FdyMMt26ZQJpcqorobrDV23R8FyxngXPkwoxqobAEtXB/AH0/S/u8RUZ46Qt
IrF8FXr4ZdyLW7CW6nmIejmlul0iRmFD7D98E6dZ3QXfype3Ifra7gG74spZ1B44
ZNvaomJKUK8Ga8rbChs9KtgrxlOC5q8IfTWF5ZExmZszPC9NRnZmU5Oncnuwek9T
Ic6zDPoAeF3jDtovZhxg1HAB9e/ENZX/V9NjO92yZa8u/TITQ88l4tJctf7uiLxO
2oGY12ln8i//pbjyUe4iM+bNh5+reAChEI8iv7WxEsj9s2HBUJ68f3tpbQ==
=Zg00
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* kvm: enable dirty ring for arm64
* target/i386: new features
* target/i386: AVX fixes
* configure: create a python venv unconditionally
* meson: bump to 0.63.0 and move tests from configure
* meson: Pass -j option to sphinx
* drop support for Python 3.6
* fix check-python-tox
* fix "make clean" in the source directory
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRmDYQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOXSwf/WKmYPe09yHfxfVSFsSz83QpB3e+f
# KJx6FdyMMt26ZQJpcqorobrDV23R8FyxngXPkwoxqobAEtXB/AH0/S/u8RUZ46Qt
# IrF8FXr4ZdyLW7CW6nmIejmlul0iRmFD7D98E6dZ3QXfype3Ifra7gG74spZ1B44
# ZNvaomJKUK8Ga8rbChs9KtgrxlOC5q8IfTWF5ZExmZszPC9NRnZmU5Oncnuwek9T
# Ic6zDPoAeF3jDtovZhxg1HAB9e/ENZX/V9NjO92yZa8u/TITQ88l4tJctf7uiLxO
# 2oGY12ln8i//pbjyUe4iM+bNh5+reAChEI8iv7WxEsj9s2HBUJ68f3tpbQ==
# =Zg00
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 04:35:32 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (68 commits)
docs/devel: update build system docs
configure: remove unnecessary check
configure: reorder option parsing code
configure: remove unnecessary mkdir
configure: do not rerun the tests with -Werror
configure: remove compiler sanity check
build: move --disable-debug-info to meson
build: move compiler version check to meson
build: move remaining compiler flag tests to meson
build: move warning flag selection to meson
build: move stack protector flag selection to meson
build: move coroutine backend selection to meson
build: move SafeStack tests to meson
build: move sanitizer tests to meson
meson: prepare move of QEMU_CFLAGS to meson
configure, meson: move --enable-modules to Meson
configure: remove pkg-config functions
build: move glib detection and workarounds to meson
meson: drop unnecessary declare_dependency()
meson: add more version numbers to the summary
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the vexpress board code, we allocate a new MemoryRegion at the top
of vexpress_common_init() but only set it up and use it inside the
"if (map[VE_NORFLASHALIAS] != -1)" conditional, so we leak it if not.
This isn't a very interesting leak as it's a tiny amount of memory
once at startup, but it's easy to fix.
We could silence Coverity simply by moving the g_new() into the
if() block, but this use of g_new(MemoryRegion, 1) is a legacy from
when this board model was originally written; we wouldn't do that
if we wrote it today. The MemoryRegions are conceptually a part of
the board and must not go away until the whole board is done with
(at the end of the simulation), so they belong in its state struct.
This machine already has a VexpressMachineState struct that extends
MachineState, so statically put the MemoryRegions in there instead of
dynamically allocating them separately at runtime.
Spotted by Coverity (CID 1509083).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230512170223.3801643-3-peter.maydell@linaro.org
Bochs card is normal PCI Express card so it fits better in system with
PCI Express bus. VGA is simple legacy PCI card.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230505120936.1097060-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable the
capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230428095533.21747-2-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The world outside moves to newer and newer cpu cores. Let move SBSA
Reference Platform to something newer as well.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230506183417.1360427-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using linux 6.x guest, at boot time, an inquiry on a scsi-generic
device makes qemu crash. This is caused by a buffer overflow when
scsi-generic patches the block limits VPD page.
Do the operations on a temporary on-stack buffer that is guaranteed
to be large enough.
Reported-by: Théo Maillart <tmaillart@freebox.fr>
Analyzed-by: Théo Maillart <tmaillart@freebox.fr>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_9pfs_free can't use gnttabdev since it is already closed and NULL-ed
out when free is called. Do the teardown in _disconnect(). This
matches the setup done in _connect().
trace-events are also added for the XenDevOps functions.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20230502143722.15613-1-jandryuk@gmail.com>
[C.S.: - Remove redundant return in xen_9pfs_free().
- Add comment to trace-events. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Now that the tswap() functions are available for target-independent
code, too, we can move xilinx_ethlite.c from specific_ss to softmmu_ss
to avoid that we have to compile this file multiple times.
Message-Id: <20230508120314.59274-1-thuth@redhat.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The only target specific code that is left in here are two spots that
use TARGET_NAME. Change them to use the new target_name() wrapper
function instead, so we can move the file into the common softmmu_ss
source set. That way we only have to compile this file once, and not
for each target anymore.
Message-Id: <20230424160434.331175-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For being able to create a universal QEMU binary one day, core
files like machine-qmp-cmds.c must not contain any "#ifdef TARGET_..."
parts. Thus let's provide the target specific function via a
function pointer in CPUClass instead, as a first step towards
making this file target independent.
Message-Id: <20230424160434.331175-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The lifetime of the PCIBridgeWindows instance accessed via the windows pointer
in struct PCIBridge is managed separately from the PCIBridge itself.
Triggered by ./qemu-system-x86_64 -M x-remote -display none -monitor stdio
QEMU monitor: device_add cxl-downstream
In some error handling paths (such as the above due to attaching a cxl-downstream
port anything other than a cxl-upstream port) the g_free() of the PCIBridge
windows in pci_bridge_region_cleanup() is called before the final call of
flatview_uref() in address_space_set_flatview() ultimately from
drain_call_rcu()
At one stage this resulted in a crash, currently can still be observed using
valgrind which records a use after free.
When present, only one instance is allocated. pci_bridge_update_mappings()
can operate directly on an instance rather than creating a new one and
swapping it in. Thus there appears to be no reason to not directly
couple the lifetimes of the two structures by embedding the PCIBridgeWindows
within the PCIBridge removing the need for the problematic separate free.
Patch is same as was posted deep in the discussion.
https://lore.kernel.org/qemu-devel/20230403171232.000020bb@huawei.com/
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421122550.28234-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
+wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
=Q8xW
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
# c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
# yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
# +wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
# QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
# R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
# CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
# =Q8xW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 09:04:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
docs/zoned-storage:add zoned emulation use case
virtio-blk: add some trace events for zoned emulation
block: add accounting for zone append operation
virtio-blk: add zoned storage emulation for zoned devices
block: add some trace events for zone append
qemu-iotests: test zone append operation
block: introduce zone append write for zoned devices
file-posix: add tracking of the zone write pointers
docs/zoned-storage: add zoned device documentation
block: add some trace events for new block layer APIs
iotests: test new zone operations
block: add zoned BlockDriver check to block layer
block/raw-format: add zone operations to pass through requests
block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
block/file-posix: introduce helper functions for sysfs attributes
block/block-common: add zoned device structs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051916.178322-4-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch extends virtio-blk emulation to handle zoned device commands
by calling the new block layer APIs to perform zoned device I/O on
behalf of the guest. It supports Report Zone, four zone oparations (open,
close, finish, reset), and Append Zone.
The VIRTIO_BLK_F_ZONED feature bit will only be set if the host does
support zoned block devices. Regular block devices(conventional zones)
will not be set.
The guest os can use blktests, fio to test those commands on zoned devices.
Furthermore, using zonefs to test zone append write is also supported.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-2-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When ipi mailbox is used, cpu_index is decoded from iocsr register.
cpu maybe does not exist. This patch adds NULL pointer check on
ipi device.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-4-gaosong@loongson.cn>
Add separate macro EXTIOI_CPUS for extioi interrupt controller, extioi
only supports 4 cpu. And set macro LOONGARCH_MAX_CPUS as 256 so that
loongarch virt machine supports more cpus.
Interrupts from external devices can only be routed cpu 0-3 because
of extioi limits, cpu internal interrupt such as timer/ipi can be
triggered on all cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-3-gaosong@loongson.cn>
ipi is used to communicate between cpus, this patch modified
loongarch ipi device as percpu device, so that there are
2 MemoryRegions with ipi device, rather than 2*cpus
MemoryRegions, which may be large than QDEV_MAX_MMIO if
more cpus are added on loongarch virt machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-2-gaosong@loongson.cn>
loongarch_ipi_iocsr MRs rely on re-entrant IO through the ipi_send
function. As such, mark these MRs re-entrancy-safe.
Fixes: a2e1753b80 ("memory: prevent dma-reentracy issues")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230506112145.3563708-1-alxndr@bu.edu>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Coverity points out (in CID 1508390) that write_bootloader has
some dead code, where we assign to 'p' and then in the following
line assign to it again. This happened as a result of the
refactoring in commit cd5066f861.
Fix the dead code by removing the 'void *v' variable entirely and
instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as
we do at its other callsite in write_bootloader_nanomips().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
- fix up xtensa docker container base to current Debian
- document breakpoint and watchpoint support
- clean up the ansible scripts for Ubuntu 22.04
- add a minimal device profile
- drop https on mipsdistros URL
- fix Kconfig bug for XLNX_VERSAL
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmRbspsACgkQ+9DbCVqe
KkSBowf+JjcVxZMb2kS8pV8WEdAq+fceBYI7mDBSEu0DFqZF+w0XSM+T+VZHyZ8+
QmPeE+McKBUXvq/V4osPnDVVZfBKmwzFN548M6qIMLUbHjbDp94DtudNkAZ0ejhc
+Ack73vzTiTWsGmBaqQxZlcYkZNZiZAhQsTF6cPwna74cDkcRghvd/Zxzy831rVB
gVWhbEkk7SBQhJ+PqRIeso60DbWvCaVDMrkPc2WX8kup6QltbUpoayS/eNOtBkfA
C557eOBxoM8s0cu33O780K5mCPCyk1IaIynvZtmkty0DXUSd5y9SNpsofhAY7BGy
4QdlolLygDgEC3s4bMULGy04nzaylw==
=a+97
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu into staging
Testing updates:
- fix up xtensa docker container base to current Debian
- document breakpoint and watchpoint support
- clean up the ansible scripts for Ubuntu 22.04
- add a minimal device profile
- drop https on mipsdistros URL
- fix Kconfig bug for XLNX_VERSAL
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmRbspsACgkQ+9DbCVqe
# KkSBowf+JjcVxZMb2kS8pV8WEdAq+fceBYI7mDBSEu0DFqZF+w0XSM+T+VZHyZ8+
# QmPeE+McKBUXvq/V4osPnDVVZfBKmwzFN548M6qIMLUbHjbDp94DtudNkAZ0ejhc
# +Ack73vzTiTWsGmBaqQxZlcYkZNZiZAhQsTF6cPwna74cDkcRghvd/Zxzy831rVB
# gVWhbEkk7SBQhJ+PqRIeso60DbWvCaVDMrkPc2WX8kup6QltbUpoayS/eNOtBkfA
# C557eOBxoM8s0cu33O780K5mCPCyk1IaIynvZtmkty0DXUSd5y9SNpsofhAY7BGy
# 4QdlolLygDgEC3s4bMULGy04nzaylw==
# =a+97
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 04:04:59 PM BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu:
hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine
tests/avocado: use http for mipsdistros.mips.com
gitlab: enable minimal device profile for aarch64 --disable-tcg
gitlab: add ubuntu-22.04-aarch64-without-defaults
scripts/ci: clean-up the 20.04/22.04 confusion in ansible
scripts/ci: add gitlab-runner to kvm group
docs: document breakpoint and watchpoint support
tests/docker: bump the xtensa base to debian:11-slim
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:
$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The PCI Resizable BAR (ReBAR) capability is currently hidden from the
VM because the protocol for interacting with the capability does not
support a mechanism for the device to reject an advertised supported
BAR size. However, when assigned to a VM, the act of resizing the
BAR requires adjustment of host resources for the device, which
absolutely can fail. Linux does not currently allow us to reserve
resources for the device independent of the current usage.
The only writable field within the ReBAR capability is the BAR Size
register. The PCIe spec indicates that when written, the device
should immediately begin to operate with the provided BAR size. The
spec however also notes that software must only write values
corresponding to supported sizes as indicated in the capability and
control registers. Writing unsupported sizes produces undefined
results. Therefore, if the hypervisor were to virtualize the
capability and control registers such that the current size is the
only indicated available size, then a write of anything other than
the current size falls into the category of undefined behavior,
where we can essentially expose the modified ReBAR capability as
read-only.
This may seem pointless, but users have reported that virtualizing
the capability in this way not only allows guest software to expose
related features as available (even if only cosmetic), but in some
scenarios can resolve guest driver issues. Additionally, no
regressions in behavior have been reported for this change.
A caveat here is that the PCIe spec requires for compatibility that
devices report support for a size in the range of 1MB to 512GB,
therefore if the current BAR size falls outside that range we revert
to hiding the capability.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230505232308.2869912-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, VFIO log_sync can be issued while migration is in SETUP
state. However, doing this log_sync is at best redundant and at worst
can fail.
Redundant -- all RAM is marked dirty in migration SETUP state and is
transferred only after migration is set to ACTIVE state, so doing
log_sync during migration SETUP is pointless.
Can fail -- there is a time window, between setting migration state to
SETUP and starting dirty tracking by RAM save_live_setup handler, during
which dirty tracking is still not started. Any VFIO log_sync call that
is issued during this time window will fail. For example, this error can
be triggered by migrating a VM when a GUI is active, which constantly
calls log_sync.
Fix it by skipping VFIO log_sync while migration is in SETUP state.
Fixes: 758b96b61d ("vfio/migrate: Move switch of dirty tracking into vfio_memory_listener")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230403130000.6422-1-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
