In VA32 mode, BL, JIRL and PC* instructions should sign-extend the low
32 bit result to 64 bits.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230822032724.1353391-7-gaosong@loongson.cn>
Message-Id: <20230822071959.35620-1-philmd@linaro.org>
When running in VA32 mode(!LA64 or VA32L[1-3] matching PLV), virtual
address is truncated to 32 bits before address mapping.
Signed-off-by: Jiajie Chen <c@jia.je>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230822032724.1353391-6-gaosong@loongson.cn>
Message-Id: <20230822071405.35386-10-philmd@linaro.org>
Add LA64 and VA32(32-bit Virtual Address) to DisasContext to allow the
translator to reject doubleword instructions in LA32 mode for example.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230822032724.1353391-5-gaosong@loongson.cn>
Message-Id: <20230822071405.35386-5-philmd@linaro.org>
VPPN of TLBEHI/TLBREHI is limited to 19 bits in LA32.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230822032724.1353391-4-gaosong@loongson.cn>
Message-Id: <20230822071405.35386-4-philmd@linaro.org>
LA32 uses a different encoding for CSR.DMW and a new direct mapping
mechanism.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230822032724.1353391-3-gaosong@loongson.cn>
Message-Id: <20230822071405.35386-3-philmd@linaro.org>
The TLB entry of LA32 lacks NR, NX and RPLV and they are hardwired to
zero in LoongArch32.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230822032724.1353391-2-gaosong@loongson.cn>
Message-Id: <20230822071405.35386-2-philmd@linaro.org>
GPRs and PC are 32-bit wide in loongarch32 mode.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230817093121.1053890-4-gaosong@loongson.cn>
[PMD: Rebased, set gdb_num_core_regs]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230821125959.28666-9-philmd@linaro.org>
Add is_la64 function to check if the current cpucfg[1].arch equals to
2(LA64).
Signed-off-by: Jiajie Chen <c@jia.je>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230817093121.1053890-2-gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230821125959.28666-7-philmd@linaro.org>
Extract loongarch64 specific code from loongarch_cpu_class_init()
to a new loongarch64_cpu_class_init().
In preparation of supporting loongarch32 cores, rename these
functions using the '64' suffix.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230821125959.28666-6-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In preparation of introducing TYPE_LOONGARCH32_CPU, introduce
an abstract TYPE_LOONGARCH64_CPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230821125959.28666-5-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230817093121.1053890-11-gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230821125959.28666-4-philmd@linaro.org>
Commit 228021f05e ("target/loongarch: Add core definition") sets
disas_set_info to loongarch_cpu_disas_set_info. Probably due to
a failed git-rebase, commit ca61e75071 ("target/loongarch: Add gdb
support") also sets it to the same value. Remove the duplication.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230821125959.28666-3-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Various CSR registers have Read/Write fields. We might
want to see guest trying to change such registers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230821125959.28666-2-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Missing the segment prefix means that user-only fails
to add guest_base for some 128-bit load/store.
Fixes: 098d0fc10d ("tcg/i386: Support 128-bit load/store")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1763
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a last minute PR for RISC-V.
The main goal is to fix
https://gitlab.com/qemu-project/qemu/-/issues/1823
which is a regression that means the aclint option
cannot be enabled.
While we are here we also fixup KVM issue.
* KVM: fix mvendorid size
* Fixup aclint check
-----BEGIN PGP SIGNATURE-----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=x8Fl
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230811-3' of https://github.com/alistair23/qemu into staging
Sixth RISC-V PR for 8.1
This is a last minute PR for RISC-V.
The main goal is to fix
https://gitlab.com/qemu-project/qemu/-/issues/1823
which is a regression that means the aclint option
cannot be enabled.
While we are here we also fixup KVM issue.
* KVM: fix mvendorid size
* Fixup aclint check
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmTWfK0ACgkQr3yVEwxT
# gBNDTw/9EnIjXKBCwSejcL3xYpwTDbUbwou3dkkSjnEkhmxvPPM3H0pWet+xYlPg
# Lgt9b9clHZAjqGoHFxEdU8fS0MY4Jq5jDAinsS2TK6czLPBe5EEhyVjoDH5iRhTX
# AymK1XgwQ2kAuw2lhcb74GDboajkC7hNhr2Km1hLtpYV7bCW/efAUSO7adG4KBlB
# SCu06s9VdFtINW0mVN249JvRVQ1408HCQ5gwA0lLVdXhfHluVidwOjc//ELtdnQn
# SeHdX1V+e+3fiYuqmr2UHaJXp9s0ZInOyLIDBPA97SOUdaO/oy+siZYRk25yV99h
# Ec7tpNnYJjzppmc++GlzTNpUWVEBM6j+QyD7ioEj4yAGkMEjUlgLcImyGng1TT4i
# uvABg91uzJyBoUga3GhZYt/sPW00Jft4VYH3QvGOOwjarIor8K0J7sox8eIOfEs4
# JqCIYX4kas+DwK4+i8WyjMeuihWFJ5ipKR7Gwhbe5uQ5szTXFYIT4TZH/78BWozI
# dMu5HOyu5+l9yCy39NP7FjNJ6VQKBYGvlkUr5rLRS0yQWGThaK8wIBMXcuZCW96p
# hSy/pratHQYaIRr0ZiqRcNyFNsTMua/C2DMPcjQR1ci8xdj010DoriyS0Vsh88xq
# pVgC6gYn59gDUdBx0gB/ZSMu4O+F/+Z5htnucoTxvwpKxUU48Lg=
# =x8Fl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Aug 2023 11:23:41 AM PDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230811-3' of https://github.com/alistair23/qemu:
hw/riscv/virt.c: change 'aclint' TCG check
target/riscv/kvm.c: fix mvendorid size in vcpu_set_machine_ids()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'aclint' property is being conditioned with tcg acceleration in
virt_machine_class_init(). But acceleration code starts later than the
class init of the board, meaning that tcg_enabled() will be always be
false during class_init(), and the option is never being declared even
when declaring TCG accel:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg,aclint=on
qemu-system-riscv64: Property 'virt-machine.aclint' not found
Fix it by moving the check from class_init() to machine_init(). Tune the
description to mention that the option is TCG only.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: c0716c81b ("hw/riscv/virt: Restrict ACLINT to TCG")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1823
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230811160224.440697-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
cpu->cfg.mvendorid is a 32 bit field and kvm_set_one_reg() always write
a target_ulong val, i.e. a 64 bit field in a 64 bit host.
Given that we're passing a pointer to the mvendorid field, the reg is
reading 64 bits starting from mvendorid and going 32 bits in the next
field, marchid. Here's an example:
$ ./qemu-system-riscv64 -machine virt,accel=kvm -m 2G -smp 1 \
-cpu rv64,marchid=0xab,mvendorid=0xcd,mimpid=0xef(...)
(inside the guest)
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xab000000cd
marchid : 0xab
mimpid : 0xef
'mvendorid' was written as a combination of 0xab (the value from the
adjacent field, marchid) and its intended value 0xcd.
Fix it by assigning cpu->cfg.mvendorid to a target_ulong var 'reg' and
use it as input for kvm_set_one_reg(). Here's the result with this patch
applied and using the same QEMU command line:
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xcd
marchid : 0xab
mimpid : 0xef
This bug affects only the generic (rv64) CPUs when running with KVM in a
64 bit env since the 'host' CPU does not allow the machine IDs to be
changed via command line.
Fixes: 1fb5a622f7 ("target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230802180058.281385-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
two fixes that seem very safe and important enough to sneak
in before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmTWXvIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpe7sH/0KteOBt324LUYZ+4NR6EQE5KDsCANGiySBK
r0B6lhcFHvNd2ej0g2hW7lL6nVVCQBkJLLzfNIR/aHkeCmOttfbhv4eF4S6Ho27d
DpkXCPZRT6F11gY7G1swFapNS/f0P7F5LGRjq4sbuw3FpyHBz0DqCQ0GOab2Qorq
VfuOfA01nYGNzHOKrEL7k9Io55oqPVcAe+5TaipNCQ4nW82i32ItTyFjQFdLIAay
qY4HEwP9vPuVwWNdQjXJNfirLMO5GQfEbyKDAjap2sL25zAV2w+mgn7xg/xkTfM6
iMX2m14lKRMy2hr8dEVh/XdLf7loAN1jSE8/Wdt+PEaexolqxCM=
=1GLE
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci: last minute bugfixes
two fixes that seem very safe and important enough to sneak
in before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmTWXvIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpe7sH/0KteOBt324LUYZ+4NR6EQE5KDsCANGiySBK
# r0B6lhcFHvNd2ej0g2hW7lL6nVVCQBkJLLzfNIR/aHkeCmOttfbhv4eF4S6Ho27d
# DpkXCPZRT6F11gY7G1swFapNS/f0P7F5LGRjq4sbuw3FpyHBz0DqCQ0GOab2Qorq
# VfuOfA01nYGNzHOKrEL7k9Io55oqPVcAe+5TaipNCQ4nW82i32ItTyFjQFdLIAay
# qY4HEwP9vPuVwWNdQjXJNfirLMO5GQfEbyKDAjap2sL25zAV2w+mgn7xg/xkTfM6
# iMX2m14lKRMy2hr8dEVh/XdLf7loAN1jSE8/Wdt+PEaexolqxCM=
# =1GLE
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Aug 2023 09:16:50 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
pci: Fix the update of interrupt disable bit in PCI_COMMAND register
hw/pci-host: Allow extended config space access for Designware PCIe host
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The PCI_COMMAND register is located at offset 4 within
the PCI configuration space and occupies 2 bytes. The
interrupt disable bit is at the 10th bit, which corresponds
to the byte at offset 5 in the PCI configuration space.
In our testing environment, the guest driver may directly
updates the byte at offset 5 in the PCI configuration space.
The backtrace looks like as following:
at hw/pci/pci.c:1442
at hw/virtio/virtio-pci.c:605
val=5, len=1) at hw/pci/pci_host.c:81
In this situation, the range_covers_byte function called
by the pci_default_write_config function will return false,
resulting in the inability to handle the interrupt disable
update event.
To fix this issue, we can use the ranges_overlap function
instead of range_covers_byte to determine whether the interrupt
bit has been updated.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Signed-off-by: yuanminghao <yuanmh12@chinatelecom.cn>
Message-Id: <ce2d0437-8faa-4d61-b536-4668f645a959@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: b6981cb57b ("pci: interrupt disable bit support")
In pcie_bus_realize(), a root bus is realized as a PCIe bus and a non-root
bus is realized as a PCIe bus if its parent bus is a PCIe bus. However,
the child bus "dw-pcie" is realized before the parent bus "pcie" which is
the root PCIe bus. Thus, the extended configuration space is not accessible
on "dw-pcie". The issue can be resolved by adding the
PCI_BUS_EXTENDED_CONFIG_SPACE flag to "pcie" before "dw-pcie" is realized.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-Id: <20230809102257.25121-1-jason.chien@sifive.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Jason Chien <<a href="mailto:jason.chien@sifive.com" target="_blank">jason.chien@sifive.com</a>><br>
When starting a remote connection GDB sends an '+':
/* Ack any packet which the remote side has already sent. */
remote_serial_write ("+", 1);
which gets flagged as a garbage character in the gdbstub state
machine. As gdb does send it out lets be permissive about the handling
so we can better see real issues.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: gdb-patches@sourceware.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-9-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The original fix caused problems with spurious characters on other
system emulation. So:
- instead of spamming output make the warning a trace point
- ensure we only allow a stop reply if it was 0x3
Suggested-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <456ed3318421dd7946bdfb5ceda7e05332da368c.1690910333.git.quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-8-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Without -S we run into potential races with tests starting before the
gdbstub attaches. We don't need to worry about user-mode as enabling
the gdbstub implies we wait for the initial connection.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-7-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.
If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A patch to pass the correct exception address when handling floating
point exceptions.
-----BEGIN PGP SIGNATURE-----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=yZi9
-----END PGP SIGNATURE-----
Merge tag 'or1k-pull-request-20230809' of https://github.com/stffrdhrn/qemu into staging
OpenRISC FPU Fix for 8.1
A patch to pass the correct exception address when handling floating
point exceptions.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmTT95sACgkQw7McLV5m
# J+TV2g/8CTpOm2bvyFF0YmRhmTBit0kqyDcX1Shi8/2SMO4++CCpIp1mlaxdHZKe
# swdOqIqJeCl3+v+z4xN3ubNMis1Gac8DmXVpVmnUoocDS6m0zM3ly9kETKjYy2vn
# +GLGzOJ+GnPeQ2oApWwOyCqdCwSx2ZuIYK+FRKIx8T1pRm4Nb1gGP6nRKYAy0+C9
# aINdaQEZrFMKl8mlEuGcNmw5YDVvT6M9+KAMaNG0AzG8N9oMCo8VZpeY4z0qkZVp
# forksGucRoWVZ5JWl6kzcPAxxAf49olRx0njfbbUcUlyXtsVQpNhPPsdDGAE5gLu
# 8kHqtRG5OIJUvsZUaedHmJW9BsISnKqIhB7keG72xeBCYPqsKkzpWotq79I50hWY
# arTvAbyEwNCPEi1kpevveuGokoKsHKr/6yJRsA2VXM5AFhIy54DkLNz6Zh8W1OGA
# Nst45kSt7tQsTwxXHTHWGO6gRK/7ZtSr/afsEYZCz9vRUnb4UMeBBAuM9u0W+WYZ
# +hEZivQI7AEVuFbfzCTpw96jAPg4tpJ0JzC0o3Vh/EKIZahrPdzvmBlsV15geu4/
# xa5PBWRFpySLEO/6/I9XrIux8wjQ1NHOTC6NtJkH33tu9tJ9pfmyRs+jdUiNwWyd
# mMz0jvDUhjGaqUYSbXDvBLcSAIKbpXpnay2StSt0S/Enr08KU+o=
# =yZi9
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 09 Aug 2023 01:31:23 PM PDT
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-20230809' of https://github.com/stffrdhrn/qemu:
target/openrisc: Set EPCR to next PC on FPE exceptions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
linux-user: Correctly detect access to /proc in openat
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTT0O4dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9NeQf/SGtJsvcMdPPcOt1P
ZK9fBK+gS9XzWvkquSL2wehs0ZY61u2IHznIqsFxhhmPqNTZPKb27u6Cg8DCxYdw
Hc+YMtjx2MOBv2pXTCc14XWkTsclP2jJaf2VUFIR/MowBJb7Xcgbv53PvRnCn3xT
KC80Pm6eJZFT0EkQZwHbT8doakkjyIx8JIapdNFvD6Ne0CWCKOwDK9sF5ob1Tf5g
BXyCw5ZtnCiToYw+RpBnhZ1wsInV+o/MV7FwcgrxGWB+4ovwRLknBzAggHvhz3ZO
pdCqvobBtUk88+txMX6ewIDYU9BsuOnWDR+j99MD9/kPtbgSLlRYzxJ0PAjCMG6m
xu0Tyg==
=n1TD
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20230809' of https://gitlab.com/rth7680/qemu into staging
linux-user: Fixes for mmap syscall emulation
linux-user: Correctly detect access to /proc in openat
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTT0O4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9NeQf/SGtJsvcMdPPcOt1P
# ZK9fBK+gS9XzWvkquSL2wehs0ZY61u2IHznIqsFxhhmPqNTZPKb27u6Cg8DCxYdw
# Hc+YMtjx2MOBv2pXTCc14XWkTsclP2jJaf2VUFIR/MowBJb7Xcgbv53PvRnCn3xT
# KC80Pm6eJZFT0EkQZwHbT8doakkjyIx8JIapdNFvD6Ne0CWCKOwDK9sF5ob1Tf5g
# BXyCw5ZtnCiToYw+RpBnhZ1wsInV+o/MV7FwcgrxGWB+4ovwRLknBzAggHvhz3ZO
# pdCqvobBtUk88+txMX6ewIDYU9BsuOnWDR+j99MD9/kPtbgSLlRYzxJ0PAjCMG6m
# xu0Tyg==
# =n1TD
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 09 Aug 2023 10:46:22 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20230809' of https://gitlab.com/rth7680/qemu:
linux-user: Fix openat() emulation to correctly detect accesses to /proc
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
linux-user: Use ARRAY_SIZE with bitmask_transtbl
linux-user: Split out do_mmap
qemu/osdep: Remove fallback for MAP_FIXED_NOREPLACE
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In qemu we catch accesses to files like /proc/cpuinfo or /proc/net/route
and return to the guest contents which would be visible on a real system
(instead what the host would show).
This patch fixes a bug, where for example the accesses
cat /proc////cpuinfo
or
cd /proc && cat cpuinfo
will not be recognized by qemu and where qemu will wrongly show
the contents of the host's /proc/cpuinfo file.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230803214450.647040-2-deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix a crash in qemu-user when running
cat /proc/self/maps
in a chroot, where /proc isn't mounted.
The problem was introduced by commit 3ce3dd8ca9 ("util/selfmap:
Rewrite using qemu/interval-tree.h") where in open_self_maps_1() the
function read_self_maps() is called and which returns NULL if it can't
read the hosts /proc/self/maps file. Afterwards that NULL is fed into
interval_tree_iter_first() which doesn't check if the root node is NULL.
Fix it by adding a check if root is NULL and return NULL in that case.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3ce3dd8ca9 ("util/selfmap: Rewrite using qemu/interval-tree.h")
Message-Id: <ZNOsq6Z7t/eyIG/9@p100>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This test fails when host page size != guest page size,
because qemu may not be able to directly map the file.
Fixes: a634148269 ("tests/tcg: Add a test for info proc mappings")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than using a zero tuple to end the table, use a macro
to apply ARRAY_SIZE and pass that on to the convert functions.
This fixes two bugs in which the conversion functions required
that both the target and host masks be non-zero in order to
continue, rather than require both target and host masks be
zero in order to terminate.
This affected mmap_flags_tbl when the host does not support
all of the flags we wish to convert (e.g. MAP_UNINITIALIZED).
Mapping these flags to zero is good enough, and matches how
the kernel ignores bits that are unknown.
Fixes: 4b840f96 ("linux-user: Populate more bits in mmap_flags_tbl")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New function that rejects unsupported map types and flags.
In 4b840f96 we should not have accepted MAP_SHARED_VALIDATE
without actually validating the rest of the flags.
Fixes: 4b840f96 ("linux-user: Populate more bits in mmap_flags_tbl")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Reclaim Unit Update operation in I/O Management Receive does not
verify the presence of a configured endurance group prior to accessing
it.
Fix this.
Cc: qemu-stable@nongnu.org
Fixes: 73064edfb8 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
nvme_directive_receive() does not check if an endurance group has been
configured (set) prior to testing if flexible data placement is enabled
or not.
Fix this.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1815
Fixes: 73064edfb8 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
In order for our emulation of MAP_FIXED_NOREPLACE to succeed within
linux-user target_mmap, we require a non-zero value. This does not
require host kernel support, merely the bit being defined.
MAP_FIXED_NOREPLACE was added with glibc 2.28. From repology.org:
Fedora 36: 2.35
CentOS 8 (RHEL-8): 2.28
Debian 11: 2.31
OpenSUSE Leap 15.4: 2.31
Ubuntu LTS 20.04: 2.31
Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230808164418.69989-1-richard.henderson@linaro.org>
linux-user: Do not adjust image mapping for host page size
linux-user: Adjust initial brk when interpreter is close to executable
util/selfmap: Rewrite using qemu/interval-tree.h
linux-user: Rewrite probe_guest_base
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTSrp4dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9lTQf/W/Tbd6CFnZpVE8Sb
BPrhdmo+x6Jftt1Ha66b/4xnasX7DuVaI1ECDh4CQQKIOh9A4LETx6ue9/UGi4vT
Fe4UrrJcAjt/CPaZhwXniJM9CvEnw1gkl3AgKAtZOBEConuPnkTiSWjySmCt3T4r
EGQxDe0HLpWYavNtvyywak/sEbwOD4hNAunFpJB6PLZ+KEoCDZwtcQdl55kg5bIt
WBMgUSXnWhC45t+26OcSDeHovqxHoA647H10T0y0U6bNVkW0tRW51xCTvHt+iDyR
s8UOCe1Q+w8F18fN68HIWBJ6NCzUts/AmQrWwc/MWiK1z91/ht5mlKAuNYnoZ6jH
htCSEA==
=ERAI
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20230808' of https://gitlab.com/rth7680/qemu into staging
linux-user: Adjust guest image layout vs reserved_va
linux-user: Do not adjust image mapping for host page size
linux-user: Adjust initial brk when interpreter is close to executable
util/selfmap: Rewrite using qemu/interval-tree.h
linux-user: Rewrite probe_guest_base
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTSrp4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9lTQf/W/Tbd6CFnZpVE8Sb
# BPrhdmo+x6Jftt1Ha66b/4xnasX7DuVaI1ECDh4CQQKIOh9A4LETx6ue9/UGi4vT
# Fe4UrrJcAjt/CPaZhwXniJM9CvEnw1gkl3AgKAtZOBEConuPnkTiSWjySmCt3T4r
# EGQxDe0HLpWYavNtvyywak/sEbwOD4hNAunFpJB6PLZ+KEoCDZwtcQdl55kg5bIt
# WBMgUSXnWhC45t+26OcSDeHovqxHoA647H10T0y0U6bNVkW0tRW51xCTvHt+iDyR
# s8UOCe1Q+w8F18fN68HIWBJ6NCzUts/AmQrWwc/MWiK1z91/ht5mlKAuNYnoZ6jH
# htCSEA==
# =ERAI
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 08 Aug 2023 02:07:42 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20230808' of https://gitlab.com/rth7680/qemu:
linux-user: Rewrite non-fixed probe_guest_base
linux-user: Rewrite fixed probe_guest_base
linux-user: Consolidate guest bounds check in probe_guest_base
linux-user: Remove duplicate CPU_LOG_PAGE from probe_guest_base
util/selfmap: Rewrite using qemu/interval-tree.h
linux-user: Use zero_bss for PT_LOAD with no file contents too
linux-user: Do not adjust zero_bss for host page size
linux-user: Do not adjust image mapping for host page size
linux-user: Adjust initial brk when interpreter is close to executable
linux-user: Use elf_et_dyn_base for ET_DYN with interpreter
linux-user: Use MAP_FIXED_NOREPLACE for initial image mmap
linux-user: Define ELF_ET_DYN_BASE in $guest/target_mman.h
linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.h
linux-user: Adjust task_unmapped_base for reserved_va
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use pgb_addr_set to probe for all of the guest addresses,
not just the main executable. Handle the identity map
specially and separately from the search.
If /proc/self/maps is available, utilize the full power
of the interval tree search, rather than a linear search
through the address list.
If /proc/self/maps is not available, increase the skip
between probes so that we do not probe every single page
of the host address space. Choose 1 MiB for 32-bit hosts
(max 4k probes) and 1 GiB for 64-bit hosts (possibly a
large number of probes, but the large step makes it more
likely to find empty space quicker).
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
