Verify that the ATA command READ NATIVE MAX ADDRESS returns the last
valid CHS tuple for the native device rather than any limit
established by INITIALIZE DEVICE PARAMETERS.
Signed-off-by: Lev Kujawski <lkujaw@mailbox.org>
Message-ID: <20221010085229.2431276-2-lkujaw@mailbox.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Always use the native CHS device parameters for the ATA commands READ
NATIVE MAX ADDRESS and READ NATIVE MAX ADDRESS EXT, not those limited
by the ATA command INITIALIZE_DEVICE_PARAMETERS (introduced in patch
176e4961, hw/ide/core.c: Implement ATA INITIALIZE_DEVICE_PARAMETERS
command, 2022-07-07.)
As stated by the ATA/ATAPI specification, "[t]he native maximum is the
highest address accepted by the device in the factory default
condition." Therefore this patch substitutes the native values in
drive_heads and drive_sectors before calling ide_set_sector().
One consequence of the prior behavior was that setting zero sectors
per track could lead to an FPE within ide_set_sector(). Thanks to
Alexander Bulekov for reporting this issue.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1243
Signed-off-by: Lev Kujawski <lkujaw@mailbox.org>
Message-ID: <20221010085229.2431276-1-lkujaw@mailbox.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The libssh bug references 18.04 which we are no longer running. We
don't need to disable glusterfs because a linux-user build shouldn't
be trying to link to it anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240426153938.1707723-4-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
20.04 is dead (from QEMU's point of view), long live 22.04!
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240426153938.1707723-3-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Upgrading the s390x runner exposed some packages are not available for
it. Add an additional optional stage we only enable for arm64/x86_64
for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240426153938.1707723-2-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"make check-qtest-aarch64" recently started failing on FreeBSD builds,
and valgrind on Linux also detected that there is something fishy with
the new stm32l4x5-usart: The code forgot to set the correct class_size
here, so the various class_init functions in this file wrote beyond
the allocated buffer when setting the subc->type field.
Fixes: 4fb37aea7e ("hw/char: Implement STM32L4x5 USART skeleton")
Message-ID: <20240429075908.36302-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to the comment in qga/meson.build, the test got disabled
since there were problems with the fuzzing job. But instead of
disabling this test completely, we should still be fine running
it when fuzzing is disabled.
Message-ID: <20240426162348.684143-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Compilation QGA without system and user fails
./configure --disable-system --disable-user --enable-guest-agent
Link failure:
/usr/bin/ld: libqemuutil.a.p/util_main-loop.c.o: in function
`os_host_main_loop_wait':
../util/main-loop.c:303: undefined reference to `replay_mutex_unlock'
/usr/bin/ld: ../util/main-loop.c:307: undefined reference to
`replay_mutex_lock'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function
`error_printf':
../util/error-report.c:38: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function
`vreport':
../util/error-report.c:225: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_qemu-timer.c.o: in function
`timerlist_run_timers':
../util/qemu-timer.c:562: undefined reference to `replay_checkpoint'
/usr/bin/ld: ../util/qemu-timer.c:530: undefined reference to
`replay_checkpoint'
/usr/bin/ld: ../util/qemu-timer.c:525: undefined reference to
`replay_checkpoint'
ninja: build stopped: subcommand failed.
Fixes: 3a15604900 ("stubs: include stubs only if needed")
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240426121347.18843-2-kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Log a guest error instead of a hardware error when
the guest tries to DMA to / from an invalid address.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-3-cfriedt@meta.com>
[thuth: Add missing #include statement, fix error reported by checkpatch.pl]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This serves to make the local variables a bit less ambiguous.
The latter two arguments are named to match DMA_START, and
DMA_SIZE.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-2-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the case that size1 was zero, because of the explicit
'end1 > addr' check, the range check would fail and the error
message would read as shown below. The correct comparison
is 'end1 >= addr'.
EDU: DMA range 0x40000-0x3ffff out of bounds (0x40000-0x40fff)!
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1254
Signed-off-by: Chris Friedt <cfriedt@meta.com>
[thuth: Adjust patch with regards to the "end1 <= end2" check]
Message-ID: <20221018122551.94567-1-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use @errp to fetch error information directly and drop the local
variable @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-8-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
So make kvm_s390_apply_cpu_model() return boolean and check the
returned boolean in apply_cpu_model() instead of accessing @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-7-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use @errp to fetch error information directly and drop the local
variable @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-6-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
So make kvm_s390_get_host_cpu_model() return boolean and check the
returned boolean in get_max_cpu_model() instead of accessing @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-5-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use @errp to fetch error information directly and drop the local
variable @err.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-3-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
With returned boolean, there's no need to check @err.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-2-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libslirp provides a newer slirp_*_hostxfwd API meant for
address-agnostic forwarding instead of the is_udp parameter which is
limited to just TCP/UDP.
This paves the way for IPv6 and Unix socket support.
Signed-off-by: Nicholas Ngai <nicholas@ngai.me>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Breno Leitao <leitao@debian.org>
Message-Id: <20210925214820.18078-1-nicholas@ngai.me>
Since commit c006147122 ("plugins: create CPUPluginState and
migrate plugin_mask") "qemu/plugin.h" uses DECLARE_BITMAP(),
which is declared in "qemu/bitmap.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240418192525.97451-19-philmd@linaro.org>
Only include what is required, avoiding the full
CPUState API from the huge "hw/core/cpu.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-4-philmd@linaro.org>
The following CPUTLBEntry helpers are only used in accel/tcg/cputlb.c:
- tlb_index()
- tlb_entry()
- tlb_read_idx()
- tlb_addr_write()
Move them to this file, allowing to remove the huge "cpu.h" header
inclusion from "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-13-philmd@linaro.org>
Declare 'have_guest_base' in "user/guest-base.h".
Very few files require this header, so explicitly include
it there instead of "exec/cpu-all.h" which is used in many
source files.
Assert this user-specific header is only included from user
emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-23-philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
The include/user/ directory contains the user-emulation
specific headers. Move guest-base.h there too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240418192525.97451-15-philmd@linaro.org>
"exec/cpu_ldst.h" is specific to TCG, do not allow its
inclusion from other accelerators.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-6-philmd@linaro.org>
Avoid TCG specific declarations being used from non-TCG accelerators.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-5-philmd@linaro.org>
The CPUBreakpoint and CPUWatchpoint structures are declared
in "hw/core/cpu.h", which contains declarations related to
CPUState and CPUClass. Some source files only require the
BP/WP definitions and don't need to pull in all CPU* API.
In order to simplify, create a new "exec/breakpoint.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240418192525.97451-3-philmd@linaro.org>
The MMUAccessType enum is declared in "hw/core/cpu.h".
"hw/core/cpu.h" contains declarations related to CPUState
and CPUClass. Some source files only require MMUAccessType
and don't need to pull in all CPU* declarations. In order
to simplify, create a new "exec/mmu-access-type.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-2-philmd@linaro.org>
The abi_ptr type is declared in "exec/cpu_ldst.h" with all
the load/store helpers. Some source files requiring abi_ptr
type don't need the load/store helpers. In order to simplify,
create a new "exec/abi_ptr.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231212123401.37493-21-philmd@linaro.org>
"exec/user/abitypes.h" requires:
- "exec/cpu-defs.h" (TARGET_LONG_BITS)
- "exec/tswap.h" (tswap32)
In order to avoid "cpu.h", pick the minimum required headers.
Assert this user-specific header is only included from user
emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231212123401.37493-20-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
tswapl() and bswaptls() are target-dependent and only used
by user emulation. Move their definitions to a new header:
"exec/user/tswap-target.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-17-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We usually check target endianess before swapping values,
so target_words_bigendian() declaration makes sense in
"exec/tswap.h" with the target swapping helpers.
Remove "hw/core/cpu.h" when it was only included to get
the target_words_bigendian() declaration.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Last use of tswapls() was removed 2 years ago in commit
aee14c77f4 ("linux-user: Rewrite do_getdents, do_getdents64").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-15-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Nothing is required from "qemu/thread.h" in "exec/cpu-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-13-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
"exec/cpu-all.h" doesn't need definitions from "qemu/rcu.h",
however "exec/ram_addr.h" does.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-17-philmd@linaro.org>
HVF has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-4-philmd@linaro.org>
NVMM has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-3-philmd@linaro.org>
WHPX has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-2-philmd@linaro.org>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented in the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore rename "exec/helper-head.h" as "exec/helper-head.h.inc".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424173333.96148-4-philmd@linaro.org>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented in the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore rename 'store-insert-al16.h' as 'store-insert-al16.h.inc'
and 'load-extract-al16-al8.h' as 'load-extract-al16-al8.h.inc'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424173333.96148-3-philmd@linaro.org>
Due to missing headers, when including "tb-jmp-cache.h" we might get:
accel/tcg/tb-jmp-cache.h:21:21: error: field ‘rcu’ has incomplete type
21 | struct rcu_head rcu;
| ^~~
accel/tcg/tb-jmp-cache.h:24:9: error: unknown type name ‘vaddr’
24 | vaddr pc;
| ^~~~~
Add the missing "qemu/rcu.h" and "exec/cpu-common.h" headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240111162442.43755-1-philmd@linaro.org>
tcg_cpu_init_cflags() accesses CPUState fields, so requires
"hw/core/cpu.h" to get its structure definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-12-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
set_helper_retaddr() is only used in accel/tcg/user-exec.c.
clear_helper_retaddr() is only used in accel/tcg/cpu-exec.c
and accel/tcg/user-exec.c.
No need to expose their definitions to all user-emulation
files including "exec/cpu_ldst.h", move them to a new
"user-retaddr.h" header (restricted to accel/tcg/).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-19-philmd@linaro.org>
The XRSTOR instruction ends calling tlb_flush(), declared
in "exec/exec-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-13-philmd@linaro.org>
We have abi_ulong == uint32_t for the 32-bit ABI.
Use the generic type to avoid to depend on the
"exec/user/abitypes.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-14-philmd@linaro.org>
'abi_ptr' is a user specific type. The system emulation
equivalent is 'target_ulong'. Use it in ppc_ldl_code()
to emphasis this is not an user emulation function.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231211212003.21686-18-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/ files requires the following definitions:
- TARGET_LONG_BITS
- TARGET_PAGE_BITS
- TARGET_PHYS_ADDR_SPACE_BITS
- TCG_GUEST_DEFAULT_MO
The first 3 are defined in "cpu-param.h". The last one
in "cpu.h", with a bunch of definitions irrelevant for
TCG. By moving the TCG_GUEST_DEFAULT_MO definition to
"cpu-param.h", we can simplify various accel/tcg includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20231211212003.21686-4-philmd@linaro.org>
Nothing in guestfd.c requires "semihosting/uaccess.h" nor "qemu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-8-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
