This patch implements the periodic and the swsmi ICH9 chipset timers. They are
especially useful when prototyping UEFI firmware (e.g. with EDK2's OVMF)
using QEMU.
For backwards compatibility, the compat properties "x-smi-swsmi-timer",
and "x-smi-periodic-timer" are introduced.
Additionally, writes to the SMI_STS register are enabled for the
corresponding two bits using a write mask to make future work easier.
Signed-off-by: Dominic Prinz <git@dprinz.de>
Message-Id: <1d90ea69e01ab71a0f2ced116801dc78e04f4448.1725991505.git.git@dprinz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPUs Control device(\\_SB.PCI0) register interface for the x86 arch is IO port
based and existing CPUs AML code assumes _CRS objects would evaluate to a system
resource which describes IO Port address. But on ARM arch CPUs control
device(\\_SB.PRES) register interface is memory-mapped hence _CRS object should
evaluate to system resource which describes memory-mapped base address. Update
build CPUs AML function to accept both IO/MEMORY region spaces and accordingly
update the _CRS object.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-6-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
OSPM evaluates _EVT method to map the event. The CPU hotplug event eventually
results in start of the CPU scan. Scan figures out the CPU and the kind of
event(plug/unplug) and notifies it back to the guest. Update the GED AML _EVT
method with the call to method \\_SB.CPUS.CSCN (via \\_SB.GED.CSCN)
Architecture specific code [1] might initialize its CPUs AML code by calling
common function build_cpus_aml() like below for ARM:
build_cpus_aml(scope, ms, opts, xx_madt_cpu_entry, memmap[VIRT_CPUHP_ACPI].base,
"\\_SB", "\\_SB.GED.CSCN", AML_SYSTEM_MEMORY);
[1] https://lore.kernel.org/qemu-devel/20240613233639.202896-13-salil.mehta@huawei.com/
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-5-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI GED (as described in the ACPI 6.4 spec) uses an interrupt listed in the
_CRS object of GED to intimate OSPM about an event. Later then demultiplexes the
notified event by evaluating ACPI _EVT method to know the type of event. Use
ACPI GED to also notify the guest kernel about any CPU hot(un)plug events.
Note, GED interface is used by many hotplug events like memory hotplug, NVDIMM
hotplug and non-hotplug events like system power down event. Each of these can
be selected using a bit in the 32 bit GED IO interface. A bit has been reserved
for the CPU hotplug event.
ACPI CPU hotplug related initialization should only happen if ACPI_CPU_HOTPLUG
support has been enabled for particular architecture. Add cpu_hotplug_hw_init()
stub to avoid compilation break.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240716111502.202344-4-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
CPU ctrl-dev MMIO region length could be used in ACPI GED and various other
architecture specific places. Move ACPI_CPU_HOTPLUG_REG_LEN macro to more
appropriate common header file.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-3-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI spec provides a scheme to associate "Generic Initiators" [1]
(e.g. heterogeneous processors and accelerators, GPUs, and I/O devices with
integrated compute or DMA engines GPUs) with Proximity Domains. This is
achieved using Generic Initiator Affinity Structure in SRAT. During bootup,
Linux kernel parse the ACPI SRAT to determine the PXM ids and create a NUMA
node for each unique PXM ID encountered. Qemu currently do not implement
these structures while building SRAT.
Add GI structures while building VM ACPI SRAT. The association between
device and node are stored using acpi-generic-initiator object. Lookup
presence of all such objects and use them to build these structures.
The structure needs a PCI device handle [2] that consists of the device BDF.
The vfio-pci device corresponding to the acpi-generic-initiator object is
located to determine the BDF.
[1] ACPI Spec 6.3, Section 5.2.16.6
[2] ACPI Spec 6.3, Table 5.80
Cc: Jonathan Cameron <qemu-devel@nongnu.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cedric Le Goater <clg@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Message-Id: <20240308145525.10886-3-ankita@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
NVIDIA GPU's support MIG (Mult-Instance GPUs) feature [1], which allows
partitioning of the GPU device resources (including device memory) into
several (upto 8) isolated instances. Each of the partitioned memory needs
a dedicated NUMA node to operate. The partitions are not fixed and they
can be created/deleted at runtime.
Unfortunately Linux OS does not provide a means to dynamically create/destroy
NUMA nodes and such feature implementation is not expected to be trivial. The
nodes that OS discovers at the boot time while parsing SRAT remains fixed. So
we utilize the Generic Initiator (GI) Affinity structures that allows
association between nodes and devices. Multiple GI structures per BDF is
possible, allowing creation of multiple nodes by exposing unique PXM in each
of these structures.
Implement the mechanism to build the GI affinity structures as Qemu currently
does not. Introduce a new acpi-generic-initiator object to allow host admin
link a device with an associated NUMA node. Qemu maintains this association
and use this object to build the requisite GI Affinity Structure.
When multiple NUMA nodes are associated with a device, it is required to
create those many number of acpi-generic-initiator objects, each representing
a unique device:node association.
Following is one of a decoded GI affinity structure in VM ACPI SRAT.
[0C8h 0200 1] Subtable Type : 05 [Generic Initiator Affinity]
[0C9h 0201 1] Length : 20
[0CAh 0202 1] Reserved1 : 00
[0CBh 0203 1] Device Handle Type : 01
[0CCh 0204 4] Proximity Domain : 00000007
[0D0h 0208 16] Device Handle : 00 00 20 00 00 00 00 00 00 00 00
00 00 00 00 00
[0E0h 0224 4] Flags (decoded below) : 00000001
Enabled : 1
[0E4h 0228 4] Reserved2 : 00000000
[0E8h 0232 1] Subtable Type : 05 [Generic Initiator Affinity]
[0E9h 0233 1] Length : 20
An admin can provide a range of acpi-generic-initiator objects, each
associating a device (by providing the id through pci-dev argument)
to the desired NUMA node (using the node argument). Currently, only PCI
device is supported.
For the grace hopper system, create a range of 8 nodes and associate that
with the device using the acpi-generic-initiator object. While a configuration
of less than 8 nodes per device is allowed, such configuration will prevent
utilization of the feature to the fullest. The following sample creates 8
nodes per PCI device for a VM with 2 PCI devices and link them to the
respecitve PCI device using acpi-generic-initiator objects:
-numa node,nodeid=2 -numa node,nodeid=3 -numa node,nodeid=4 \
-numa node,nodeid=5 -numa node,nodeid=6 -numa node,nodeid=7 \
-numa node,nodeid=8 -numa node,nodeid=9 \
-device vfio-pci-nohotplug,host=0009:01:00.0,bus=pcie.0,addr=04.0,rombar=0,id=dev0 \
-object acpi-generic-initiator,id=gi0,pci-dev=dev0,node=2 \
-object acpi-generic-initiator,id=gi1,pci-dev=dev0,node=3 \
-object acpi-generic-initiator,id=gi2,pci-dev=dev0,node=4 \
-object acpi-generic-initiator,id=gi3,pci-dev=dev0,node=5 \
-object acpi-generic-initiator,id=gi4,pci-dev=dev0,node=6 \
-object acpi-generic-initiator,id=gi5,pci-dev=dev0,node=7 \
-object acpi-generic-initiator,id=gi6,pci-dev=dev0,node=8 \
-object acpi-generic-initiator,id=gi7,pci-dev=dev0,node=9 \
-numa node,nodeid=10 -numa node,nodeid=11 -numa node,nodeid=12 \
-numa node,nodeid=13 -numa node,nodeid=14 -numa node,nodeid=15 \
-numa node,nodeid=16 -numa node,nodeid=17 \
-device vfio-pci-nohotplug,host=0009:01:01.0,bus=pcie.0,addr=05.0,rombar=0,id=dev1 \
-object acpi-generic-initiator,id=gi8,pci-dev=dev1,node=10 \
-object acpi-generic-initiator,id=gi9,pci-dev=dev1,node=11 \
-object acpi-generic-initiator,id=gi10,pci-dev=dev1,node=12 \
-object acpi-generic-initiator,id=gi11,pci-dev=dev1,node=13 \
-object acpi-generic-initiator,id=gi12,pci-dev=dev1,node=14 \
-object acpi-generic-initiator,id=gi13,pci-dev=dev1,node=15 \
-object acpi-generic-initiator,id=gi14,pci-dev=dev1,node=16 \
-object acpi-generic-initiator,id=gi15,pci-dev=dev1,node=17 \
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu [1]
Cc: Jonathan Cameron <qemu-devel@nongnu.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Message-Id: <20240308145525.10886-2-ankita@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RISC-V should also generate the SPCR in a manner similar to ARM.
Therefore, instead of replicating the code, relocate this function
to the common AML build.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240129021440.17640-2-jeeheng.sia@starfivetech.com>
[ Changes by AF:
- Add missing Language SPCR entry
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We need the VMStateDescription structure definition from
"migration/vmstate.h" in order to declare vmstate_tco_io_sts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240219141412.71418-4-philmd@linaro.org>
ACPIOSTInfo is a QAPI generated structure:
$ git grep -w ACPIOSTInfo
qapi/acpi.json:81:# @ACPIOSTInfo:
qapi/acpi.json:99:{ 'struct': 'ACPIOSTInfo',
qapi/acpi.json:109:# Return a list of ACPIOSTInfo for devices that support status
Include the "qapi/qapi-types-acpi.h" header to avoid the following
errors when including "hw/acpi/cpu.h" or "hw/acpi/memory_hotplug.h"
elsewhere:
include/hw/acpi/cpu.h:67:52: error: unknown type name 'ACPIOSTInfoList'
void acpi_cpu_ospm_status(CPUHotplugState *cpu_st, ACPIOSTInfoList ***list);
^
include/hw/acpi/memory_hotplug.h:51:55: error: unknown type name 'ACPIOSTInfoList'
void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240219141412.71418-2-philmd@linaro.org>
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
=ILek
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
# pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
# 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
# ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
# 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
# zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
# =ILek
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits)
intel-iommu: Report interrupt remapping faults, fix return value
MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section
vhost-user: Fix protocol feature bit conflict
tests/acpi: Update DSDT.cxl with QTG DSM
hw/cxl: Add QTG _DSM support for ACPI0017 device
tests/acpi: Allow update of DSDT.cxl
hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range
vhost-user: fix lost reconnect
vhost-user-scsi: start vhost when guest kicks
vhost-user-scsi: support reconnect to backend
vhost: move and rename the conn retry times
vhost-user-common: send get_inflight_fd once
hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine
hw/isa/piix: Implement multi-process QEMU support also for PIIX4
hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring
hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4
hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
hw/isa/piix: Share PIIX3's base class with PIIX4
hw/isa/piix: Harmonize names of reset control memory regions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a simple _DSM call support for the ACPI0017 device to return fake QTG
ID values of 0 and 1 in all cases. This for _DSM plumbing testing from the OS.
Following edited for readability
Device (CXLM)
{
Name (_HID, "ACPI0017") // _HID: Hardware ID
...
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
If ((Arg0 == ToUUID ("f365f9a6-a7de-4071-a66a-b40c0b4f8e52")))
{
If ((Arg2 == Zero))
{
Return (Buffer (One) { 0x01 })
}
If ((Arg2 == One))
{
Return (Package (0x02)
{
One,
Package (0x02)
{
Zero,
One
}
})
}
}
}
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231012125623.21101-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix:
hw/acpi/pcihp.c:499:36: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
MemoryRegion *address_space_io,
^
include/exec/address-spaces.h:35:21: note: previous declaration is here
extern AddressSpace address_space_io;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231010115048.11856-5-philmd@linaro.org>
Now that TYPE_ACPI_GED_X86 doesn't assign AcpiDeviceIfClass::madt_cpu any more
it is the same as TYPE_ACPI_GED.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "hw/boards.h" is unused since the previous commit. Since its removal
requires include fixes in various unrelated files to keep the code compiling it
has been split in a dedicated commit.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This virtual method was always set to the x86-specific pc_madt_cpu_entry(),
even in piix4 which is also used in MIPS. The previous changes use
pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped.
Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub
in hw/acpi/acpi-x86-stub can be removed as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_cpus_aml() is architecture independent but needs to create architecture-
specific CPU AML. So far this was achieved by using a virtual method from
TYPE_ACPI_DEVICE_IF. However, build_cpus_aml() would resolve this interface from
global (!) state. This makes it quite incomprehensible where this interface
comes from (TYPE_PIIX4_PM?, TYPE_ICH9_LPC_DEVICE?, TYPE_ACPI_GED_X86?) an can
lead to crashes when the generic code is ported to new architectures.
So far, build_cpus_aml() is only called in architecture-specific code -- and
only in x86. We can therefore simply pass pc_madt_cpu_entry() as callback to
build_cpus_aml(). This is the same callback that would be used through
TYPE_ACPI_DEVICE_IF.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices.
This commit includes changes for the common code.
- Added support for the new checksum registers which are required for
the I2C support. The checksum calculation is handled in the qemu
common code.
- Added wrapper function for read and write data so that I2C code can
call it without MMIO interface.
The TPM TIS I2C spec describes in the table in section "Interface Locality
Usage per Register" that the TPM_INT_ENABLE and TPM_INT_STATUS registers
must be writable for any locality even if the locality is not the active
locality. Therefore, remove the checks whether the writing locality is the
active locality for these registers.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-3-ninadpalsule@us.ibm.com
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Provide pcihp specific callback to check if bus is hotpluggable
and consolidate its scattered hotplug criteria there.
While at it clean up no longer needed
qbus_set_hotplug_handler(BUS(bus), NULL)
workarounds since callback makes qbus_is_hotpluggable() return
correct answer even if hotplug_handler is set on bus.
PS:
see ("pci: fix 'hotplugglable' property behavior") for details
why callback was introduced.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... instead of duplicating them in piix4 and lpc and then
trying to pass them to pcihp routines as arguments.
it simplifies call sites and places pcihp specific in
its own structure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make TYPE_ICH9_LPC_DEVICE more self-contained by moving the call to
ich9_lpc_pm_init() from board code to its realize function. In order
to propagate x86_machine_is_smm_enabled(), introduce an "smm-enabled"
property like we have in piix4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
simplify build_append_pci_bus_devices() a bit by handling bridge
specific logic in bridge dedicated AcpiDevAmlIfClass::build_dev_aml
callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only function ever assigned to AcpiDeviceIfClass::madt_cpu is
pc_madt_cpu_entry() which doesn't use the AcpiDeviceIf parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230121151941.24120-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Frees isa-bus.c from implicit ACPI dependency.
While at it, resolve open coding of qbus_build_aml() in piix3 and ich9.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230121151941.24120-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A number of headers neglect to include everything they need. They
compile only if the headers they need are already included from
elsewhere. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221222120813.727830-3-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
tco.c contains the ICH9 implementation of its "total cost
of ownership". Rename it accordingly to emphasis this is
a part of the ICH9 model.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221212105115.2113-1-philmd@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
It will be used in followup commits to figure out if
device has it's own, device specific AML block.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This allows the QOM types in hw/acpi/piix4.c to be used elsewhere by simply including
hw/acpi/piix4.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Refactoring step on path to moving all CXL state out of
MachineState.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
convert ad-hoc way we use to generate AML for ISA/SMB IPMI devices
to a generic approach (i.e. make devices provide its own AML blobs
like it is done with other ISA devices (ex. KBD))
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
smbus-ipmi AML description needs to specify a path to its parent
node in _CRS. The rest of IPMI inplementations (ISA based)
do not need path at all. Instead of passing through a full path
use relative path to point to smbus-ipmi's parent node, it will
let follow up patches to create IPMI device AML in a generic
way instead of current ad-hoc way. (i.e. AML will be generated
the same way it's done for other ISA device, and smbus will be
converted to generate AML for its slave devices the same way
as ISA)
expected AML change:
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
- AddressingMode7Bit, "\\_SB.PCI0.SMB0",
+ AddressingMode7Bit, "^",
0x00, ResourceProducer, , Exclusive,
)
})
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is already ISADeviceClass::build_aml() callback which
builds device specific AML blob for some ISA devices.
To extend the same idea to other devices, add TYPE_ACPI_DEV_AML_IF
Interface that will provide a more generic callback which
will be used not only for ISA but other devices. It will
allow get rid of some data-mining and ad-hoc AML building,
by asking device(s) to generate its own AML blob like it's
done for ISA devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CXL Early Discovery Table is defined in the CXL 2.0 specification as
a way for the OS to get CXL specific information from the system
firmware.
CXL 2.0 specification adds an _HID, ACPI0016, for CXL capable host
bridges, with a _CID of PNP0A08 (PCIe host bridge). CXL aware software
is able to use this initiate the proper _OSC method, and get the _UID
which is referenced by the CEDT. Therefore the existence of an ACPI0016
device allows a CXL aware driver perform the necessary actions. For a
CXL capable OS, this works. For a CXL unaware OS, this works.
CEDT awaremess requires more. The motivation for ACPI0017 is to provide
the possibility of having a Linux CXL module that can work on a legacy
Linux kernel. Linux core PCI/ACPI which won't be built as a module,
will see the _CID of PNP0A08 and bind a driver to it. If we later loaded
a driver for ACPI0016, Linux won't be able to bind it to the hardware
because it has already bound the PNP0A08 driver. The ACPI0017 device is
an opportunity to have an object to bind a driver will be used by a
Linux driver to walk the CXL topology and do everything that we would
have preferred to do with ACPI0016.
There is another motivation for an ACPI0017 device which isn't
implemented here. An operating system needs an attach point for a
non-volatile region provider that understands cross-hostbridge
interleaving. Since QEMU emulation doesn't support interleaving yet,
this is more important on the OS side, for now.
As of CXL 2.0 spec, only 1 sub structure is defined, the CXL Host Bridge
Structure (CHBS) which is primarily useful for telling the OS exactly
where the MMIO for the host bridge is.
Link: https://lore.kernel.org/linux-cxl/20210115034911.nkgpzc756d6qmjpl@intel.com/T/#t
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-26-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
vmstate_acpi_pcihp_use_acpi_index() was expecting AcpiPciHpState
as state but it actually received PIIX4PMState, because
VMSTATE_PCI_HOTPLUG is a macro and not another struct.
So it ended up accessing random pointer, which resulted
in 'false' return value and acpi_index field wasn't ever
sent.
However in 7.0 that pointer de-references to value > 0, and
destination QEMU starts to expect the field which isn't
sent in migratioon stream from older QEMU (6.2 and older).
As result migration fails with:
qemu-system-x86_64: Missing section footer for 0000:00:01.3/piix4_pm
qemu-system-x86_64: load of migration failed: Invalid argument
In addition with QEMU-6.2, destination due to not expected
state, also never expects the acpi_index field in migration
stream.
Q35 is not affected as it always sends/expects the field as
long as acpi based PCI hotplug is enabled.
Fix issue by introducing compat knob to never send/expect
acpi_index in migration stream for 6.2 and older PC machine
types and always send it for 7.0 and newer PC machine types.
Diagnosed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b32bd76 ("pci: introduce acpi-index property for PCI device")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/932
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
This can allow the guest OS to determine more easily if i8042 controller
is present in the system or not, so it doesn't need to do probing of the
controller, but just initialize it immediately, before enumerating the
ACPI AML namespace.
The 8042 bit in IAPC_BOOT_ARCH was introduced from ACPI spec v2 (FADT
revision 2 and above). Therefore, in this change, we only enable this bit for
x86/q35 machine types since x86/i440fx machines use FADT ACPI table with
revision 1.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change exposes ACPI ERST support for x86 guests.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-8-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change introduces the public defintions for ACPI ERST.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-5-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To solve issues [1-2] the Hot Plug Capable bit in PCIe Slots will be
turned on, while the switch to ACPI Hot-plug will be done in the
DSDT table.
Introducing 'x-keep-native-hpc' property disables the HPC bit only
in 6.1 and as a result keeps the forced 'reserve-io' on
pcie-root-ports in 6.1 too.
[1] https://gitlab.com/qemu-project/qemu/-/issues/641
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211112110857.3116853-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the Processor Properties Topology Table (PPTT) used to
describe CPU topology information to ACPI guests.
Note, a DT-boot Linux guest with a non-flat CPU topology will
see socket and core IDs being sequential integers starting
from zero, which is different from ACPI-boot Linux guest,
e.g. with -smp 4,sockets=2,cores=2,threads=1
a DT boot produces:
cpu: 0 package_id: 0 core_id: 0
cpu: 1 package_id: 0 core_id: 1
cpu: 2 package_id: 1 core_id: 0
cpu: 3 package_id: 1 core_id: 1
an ACPI boot produces:
cpu: 0 package_id: 36 core_id: 0
cpu: 1 package_id: 36 core_id: 1
cpu: 2 package_id: 96 core_id: 2
cpu: 3 package_id: 96 core_id: 3
This is due to several reasons:
1) DT cpu nodes do not have an equivalent field to what the PPTT
ACPI Processor ID must be, i.e. something equal to the MADT CPU
UID or equal to the UID of an ACPI processor container. In both
ACPI cases those are platform dependant IDs assigned by the
vendor.
2) While QEMU is the vendor for a guest, if the topology specifies
SMT (> 1 thread), then, with ACPI, it is impossible to assign a
core-id the same value as a package-id, thus it is not possible
to have package-id=0 and core-id=0. This is because package and
core containers must be in the same ACPI namespace and therefore
must have unique UIDs.
3) ACPI processor containers are not mandatorily required for PPTT
tables to be used and, due to the limitations of which IDs are
selected described above in (2), they are not helpful for QEMU,
so we don't build them with this patch. In the absence of them,
Linux assigns its own unique IDs. The maintainers have chosen not
to use counters from zero, but rather ACPI table offsets, which
explains why the numbers are so much larger than with DT.
4) When there is no SMT (threads=1) the core IDs for ACPI boot guests
match the logical CPU IDs, because these IDs must be equal to the
MADT CPU UID (as no processor containers are present), and QEMU
uses the logical CPU ID for these MADT IDs.
So in summary, with QEMU as the vendor for the guests, we simply
use sequential integers starting from zero for the non-leaf nodes
but with ID-valid flag unset, so that guest will ignore them and
use table offsets as unique container IDs. And we use logical CPU
IDs for the leaf nodes with the ID-valid flag set, which will be
consistent with MADT.
Currently the implementation of PPTT generation complies with ACPI
specification 5.2.29 (Revision 6.3). The 6.3 spec can be found at:
https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211020142125.7516-6-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change caf108bc58 ("hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35")
selects an IO address range for acpi based PCI hotplug for q35 arbitrarily. It
starts at address 0x0cc4 and ends at 0x0cdb. At the time when the patch was
written but the final version of the patch was not yet pushed upstream, this
address range was free and did not conflict with any other IO address ranges.
However, with the following change, this address range was no
longer conflict free as in this change, the IO address range
(value of ACPI_PCIHP_SIZE) was incremented by four bytes:
b32bd763a1 ("pci: introduce acpi-index property for PCI device")
This can be seen from the output of QMP command 'info mtree' :
0000000000000600-0000000000000603 (prio 0, i/o): acpi-evt
0000000000000604-0000000000000605 (prio 0, i/o): acpi-cnt
0000000000000608-000000000000060b (prio 0, i/o): acpi-tmr
0000000000000620-000000000000062f (prio 0, i/o): acpi-gpe0
0000000000000630-0000000000000637 (prio 0, i/o): acpi-smi
0000000000000cc4-0000000000000cdb (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000ce3 (prio 0, i/o): acpi-cpu-hotplug
It shows that there is a region of conflict between IO regions of acpi
pci hotplug and acpi cpu hotplug.
Unfortunately, the change caf108bc58 did not update the IO address range
appropriately before it was pushed upstream to accommodate the increased
length of the IO address space introduced in change b32bd763a1.
Due to this bug, windows guests complain 'This device cannot find
enough free resources it can use' in the device manager panel for extended
IO buses. This issue also breaks the correct functioning of pci hotplug as the
following shows that the IO space for pci hotplug has been truncated:
(qemu) info mtree -f
FlatView #0
AS "I/O", root: io
Root memory region: io
0000000000000cc4-0000000000000cd7 (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000cf7 (prio 0, i/o): acpi-cpu-hotplug
Therefore, in this fix, we adjust the IO address range for the acpi pci
hotplug so that it does not conflict with cpu hotplug and there is no
truncation of IO spaces. The starting IO address of PCI hotplug region
has been decremented by four bytes in order to accommodate four byte
increment in the IO address space introduced by change
b32bd763a1 ("pci: introduce acpi-index property for PCI device")
After fixing, the following are the corrected IO ranges:
0000000000000600-0000000000000603 (prio 0, i/o): acpi-evt
0000000000000604-0000000000000605 (prio 0, i/o): acpi-cnt
0000000000000608-000000000000060b (prio 0, i/o): acpi-tmr
0000000000000620-000000000000062f (prio 0, i/o): acpi-gpe0
0000000000000630-0000000000000637 (prio 0, i/o): acpi-smi
0000000000000cc0-0000000000000cd7 (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000ce3 (prio 0, i/o): acpi-cpu-hotplug
This change has been tested using a Windows Server 2019 guest VM. Windows
no longer complains after this change.
Fixes: caf108bc58 ("hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/561
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20210916132838.3469580-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-36-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
