Commit Graph

719 Commits

Author SHA1 Message Date
Kevin Wolf
b24ec3c462 block: Remove deprecated -drive geometry options
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-08-15 12:50:39 +02:00
Cornelia Huck
6703db131f Revert "block: Remove deprecated -drive geometry options"
This reverts commit a7aff6dd10.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:12 +02:00
Cornelia Huck
75f4cd2979 Revert "block: Remove deprecated -drive option addr"
This reverts commit eae3bd1eb7.

Reverted to avoid conflicts for geometry options revert.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:12 +02:00
Cornelia Huck
44e8b4689c Revert "block: Remove deprecated -drive option serial"
This reverts commit b008326744.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:11 +02:00
Cornelia Huck
19a49c5637 Revert "block: Remove dead deprecation warning code"
This reverts commit 6266e900b8.

Some deprecated -drive options were still in use by libvirt, only
fixed with libvirt commit b340c6c614 ("qemu: format serial and geometry
on frontend disk device"), which is not yet in any released version
of libvirt.

So let's hold off removing the deprecated options for one more QEMU
release.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:11 +02:00
Vladimir Sementsov-Ogievskiy
930fe17f99 blockdev: enable non-root nodes for backup source
This is needed to implement the image-fleecing workflow where we
create a temporary node backed by an active node, then start
backupdev-backup sync=none from the active node to the temp node.

In this case, the active node is now a root node AND a backing node,
so it no longer qualifies as a root node, so we loosen the restriction
on which nodes can be considered as the source for a backup.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180702194630.9360-2-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-07-02 15:23:54 -05:00
Max Reitz
481debaa32 block/mirror: Add copy mode QAPI interface
This patch allows the user to specify whether to use active or only
background mode for mirror block jobs.  Currently, this setting will
remain constant for the duration of the entire block job.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-18 17:05:16 +02:00
Kevin Wolf
6266e900b8 block: Remove dead deprecation warning code
We removed all options from the 'deprecated' array, so the code is dead
and can be removed as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf
b008326744 block: Remove deprecated -drive option serial
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.

Tests need to be updated to set the serial number with -global instead
of using the -drive option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf
eae3bd1eb7 block: Remove deprecated -drive option addr
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf
a7aff6dd10 block: Remove deprecated -drive geometry options
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-15 14:49:44 +02:00
Max Reitz
609f45ea95 block: Add block-specific QDict header
There are numerous QDict functions that have been introduced for and are
used only by the block layer.  Move their declarations into an own
header file to reflect that.

While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them.  Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Vladimir Sementsov-Ogievskiy
a6e2ca5f65 qapi: add disabled parameter to block-dirty-bitmap-add
This is needed, for example, to create a new bitmap and merge several
disabled bitmaps into a new one. Without this flag we will have to
put block-dirty-bitmap-add and block-dirty-bitmap-disable into one
transaction.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Vladimir Sementsov-Ogievskiy
b598e531f1 qapi: add x-block-dirty-bitmap-merge
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Vladimir Sementsov-Ogievskiy
c649044740 qmp: transaction support for x-block-dirty-bitmap-enable/disable
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-4-jsnow@redhat.com
[Added x- prefix. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Vladimir Sementsov-Ogievskiy
5c5d2e50e5 qapi: add x-block-dirty-bitmap-enable/disable
Expose the ability to turn bitmaps "on" or "off". This is experimental
and principally for the sake of the Libvirt Checkpoints API, and it may
or may not be committed for 3.0.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Paolo Bonzini
ab41fc4853 block: remove bdrv_dirty_bitmap_make_anon
All this function is doing will be repeated by
bdrv_do_release_matching_dirty_bitmap_locked, except
resetting bm->persistent.  But even that does not matter
because the bitmap will be freed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180323164254.26487-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:31 -04:00
Kevin Wolf
5f9a6a08e8 job: Add job_dismiss()
This moves block_job_dismiss() to the Job layer.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
3d70ff53b6 job: Move completion and cancellation to Job
This moves the top-level job completion and cancellation functions from
BlockJob to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
7eaa8fb57d job: Move transactions to Job
This moves the logic that implements job transactions from BlockJob to
Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
62c9e4162a job: Switch transactions to JobTxn
This doesn't actually move any transaction code to Job yet, but it
renames the type for transactions from BlockJobTxn to JobTxn and makes
them contain Jobs rather than BlockJobs

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
3453d97243 job: Move .complete callback to Job
This moves the .complete callback that tells a READY job to complete
from BlockJobDriver to JobDriver. The wrapper function job_complete()
doesn't require anything block job specific any more and can be moved
to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
bb02b65c7d job: Move BlockJobCreateFlags to Job
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
b15de82867 job: Move pause/resume functions to Job
While we already moved the state related to job pausing to Job, the
functions to do were still BlockJob only. This commit moves them over to
Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
da01ff7f38 job: Move coroutine and related code to Job
This commit moves some core functions for dealing with the job coroutine
from BlockJob to Job. This includes primarily entering the coroutine
(both for the first and reentering) and yielding explicitly and at pause
points.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23 14:30:50 +02:00
Marc-André Lureau
cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Vladimir Sementsov-Ogievskiy
7e5c776d15 qapi: add block latency histogram interface
Set (and clear) histograms through new command
block-latency-histogram-set and show new statistics in
query-blockstats results.

For now, the command is marked experimental with prefix 'x-',
to gain experience with the interface without being stuck
with design decisions.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: fix typos, mention x- prefix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:38 -05:00
Max Reitz
e59a0cf17b block: Handle null backing link
Instead of converting all "backing": null instances into "backing": "",
handle a null value directly in bdrv_open_inherit().

This enables explicitly null backing links for json:{} filenames.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-7-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter order and qapi headers split]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Max Reitz
7dc847ebba qapi: Replace qobject_to_X(o) by qobject_to(X, o)
This patch was generated using the following Coccinelle script:

@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)

and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Liang Li
b76e4458b1 block/mirror: change the semantic of 'force' of block-job-cancel
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.

Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync.  However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration.  Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.

The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused.  However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:39 +01:00
John Snow
b40dacdc7c blockjobs: Expose manual property
Expose the "manual" property via QAPI for the backup-related jobs.
As of this commit, this allows the management API to request the
"concluded" and "dismiss" semantics for backup jobs.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
John Snow
11b61fbc0d blockjobs: add block-job-finalize
Instead of automatically transitioning from PENDING to CONCLUDED, gate
the .prepare() and .commit() phases behind an explicit acknowledgement
provided by the QMP monitor if auto_finalize = false has been requested.

This allows us to perform graph changes in prepare and/or commit so that
graph changes do not occur autonomously without knowledge of the
controlling management layer.

Transactions that have reached the "PENDING" state together can all be
moved to invoke their finalization methods by issuing block_job_finalize
to any one job in the transaction.

Jobs in a transaction with mixed job->auto_finalize settings will all
remain stuck in the "PENDING" state, as if the entire transaction was
specified with auto_finalize = false. Jobs that specified
auto_finalize = true, however, will still not emit the PENDING event.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
John Snow
75f710599f blockjobs: add block_job_dismiss
For jobs that have reached their CONCLUDED state, prior to having their
last reference put down (meaning jobs that have completed successfully,
unsuccessfully, or have been canceled), allow the user to dismiss the
job's lingering status report via block-job-dismiss.

This gives management APIs the chance to conclusively determine if a job
failed or succeeded, even if the event broadcast was missed.

Note: block_job_do_dismiss and block_job_decommission happen to do
exactly the same thing, but they're called from different semantic
contexts, so both aliases are kept to improve readability.

Note 2: Don't worry about the 0x04 flag definition for AUTO_DISMISS, she
has a friend coming in a future patch to fill the hole where 0x02 is.

Verbs:
Dismiss: operates on CONCLUDED jobs only.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
John Snow
0ec4dfb8d6 blockjobs: add block_job_verb permission table
Which commands ("verbs") are appropriate for jobs in which state is
also somewhat burdensome to keep track of.

As of this commit, it looks rather useless, but begins to look more
interesting the more states we add to the STM table.

A recurring theme is that no verb will apply to an 'undefined' job.

Further, it's not presently possible to restrict the "pause" or "resume"
verbs any more than they are in this commit because of the asynchronous
nature of how jobs enter the PAUSED state; justifications for some
seemingly erroneous applications are given below.

=====
Verbs
=====

Cancel:    Any state except undefined.
Pause:     Any state except undefined;
           'created': Requests that the job pauses as it starts.
           'running': Normal usage. (PAUSED)
           'paused':  The job may be paused for internal reasons,
                      but the user may wish to force an indefinite
                      user-pause, so this is allowed.
           'ready':   Normal usage. (STANDBY)
           'standby': Same logic as above.
Resume:    Any state except undefined;
           'created': Will lift a user's pause-on-start request.
           'running': Will lift a pause request before it takes effect.
           'paused':  Normal usage.
           'ready':   Will lift a pause request before it takes effect.
           'standby': Normal usage.
Set-speed: Any state except undefined, though ready may not be meaningful.
Complete:  Only a 'ready' job may accept a complete request.

=======
Changes
=======

(1)

To facilitate "nice" error checking, all five major block-job verb
interfaces in blockjob.c now support an errp parameter:

- block_job_user_cancel is added as a new interface.
- block_job_user_pause gains an errp paramter
- block_job_user_resume gains an errp parameter
- block_job_set_speed already had an errp parameter.
- block_job_complete already had an errp parameter.

(2)

block-job-pause and block-job-resume will no longer no-op when trying
to pause an already paused job, or trying to resume a job that isn't
paused. These functions will now report that they did not perform the
action requested because it was not possible.

iotests have been adjusted to address this new behavior.

(3)

block-job-complete doesn't worry about checking !block_job_started,
because the permission table guards against this.

(4)

test-bdrv-drain's job implementation needs to announce that it is
'ready' now, in order to be completed.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
Vladimir Sementsov-Ogievskiy
4f43e9535b dirty-bitmap: add locked state
Add special state, when qmp operations on the bitmap are disabled.
It is needed during bitmap migration. "Frozen" state is not
appropriate here, because it looks like bitmap is unchanged.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-03-13 17:05:00 -04:00
Markus Armbruster
9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Vladimir Sementsov-Ogievskiy
3e99da5e76 block: maintain persistent disabled bitmaps
To maintain load/store disabled bitmap there is new approach:

 - deprecate @autoload flag of block-dirty-bitmap-add, make it ignored
 - store enabled bitmaps as "auto" to qcow2
 - store disabled bitmaps without "auto" flag to qcow2
 - on qcow2 open load "auto" bitmaps as enabled and others
   as disabled (except in_use bitmaps)

Also, adjust iotests 165 and 176 appropriately.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180202160752.143796-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:58 +01:00
Paolo Bonzini
cb2af9176f block: early check for blockers on drive-mirror
Even if an op blocker is present for BLOCK_OP_TYPE_MIRROR_SOURCE,
it is checked a bit late and the result is that the target is
created even if drive-mirror subsequently fails.  Add an early
check to avoid this.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-02-13 12:27:17 +01:00
Markus Armbruster
452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
47e6b297e7 Include qapi/qmp/qlist.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
15280c360e qdict qlist: Make most helper macros functions
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile.  We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h.  Works,
because we include those wherever the macros get used.

Open-coding these helpers is of dubious value.  Turn them into
functions and drop the includes from the headers.

This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree.  For
qapi/qmp/qnull.h, the number drops from 4552 to 21.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
6b67395762 Eliminate qapi/qmp/types.h
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers.  Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time.  Most of the
places that use it don't need all the headers, either.

Include the necessary headers directly, and drop qapi/qmp/types.h.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Max Reitz
34ce111141 blockdev: Mark BD-{remove,insert}-medium stable
Now that iotest 093 test proves that the throttling configuration
survives a blockdev-remove-medium/blockdev-insert-medium pair, the
original reason for declaring these commands experimental is gone
(see commit 6e0abc251d).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-5-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-01-23 12:34:42 +01:00
Max Reitz
82fcf66e05 blockdev: Drop BD-{remove,insert}-medium's @device
This is an incompatible change, which is fine as the commands are
experimental.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-4-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-01-23 12:34:42 +01:00
Thomas Huth
0e153b04cc block: Remove the obsolete -drive boot=on|off parameter
It's not working anymore since QEMU v1.3.0 - time to remove it now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-22 15:03:41 +01:00
Stefan Hajnoczi
882e9b89af blockdev: add x-blockdev-set-iothread force boolean
When a node is already associated with a BlockBackend the
x-blockdev-set-iothread command refuses to set the IOThread.  This is to
prevent accidentally changing the IOThread when the nodes are in use.

When the nodes are created with -drive they automatically get a
BlockBackend.  In that case we know nothing is using them yet and it's
safe to set the IOThread.  Add a force boolean to override the check.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
ca00bbb153 blockdev: add x-blockdev-set-iothread testing command
Currently there is no easy way for iotests to ensure that a BDS is bound
to a particular IOThread.  Normally the virtio-blk device calls
blk_set_aio_context() when dataplane is enabled during guest driver
initialization.  This never happens in iotests since -machine
accel=qtest means there is no guest activity (including device driver
initialization).

This patch adds a QMP command to explicitly assign IOThreads in test
cases.  See qapi/block-core.json for a description of the command.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
5016f21b70 block: drop unused BlockDirtyBitmapState->aio_context field
The dirty bitmap actions in qmp_transaction have not used AioContext
since the dirty bitmap locking discipline was introduced in commit
2119882c7e ("block: introduce
dirty_bitmap_mutex").  Remove the unused field.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
a36e458cdd block: don't keep AioContext acquired after internal_snapshot_prepare()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
edd5adeecd block: don't keep AioContext acquired after blockdev_backup_prepare()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Stefan Hajnoczi
66d56054bc block: don't keep AioContext acquired after drive_backup_prepare()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Stefan Hajnoczi
2d24b60b77 block: don't keep AioContext acquired after external_snapshot_prepare()
It is not necessary to hold AioContext across transactions anymore since
bdrv_drained_begin/end() is used to keep the nodes quiesced.  In fact,
using the AioContext lock for this purpose was always buggy.

This patch reduces the scope of AioContext locked regions.  This is not
just a cleanup but also fixes hangs that occur in BDRV_POLL_WHILE()
because it is unware of recursive locking and does not release the
AioContext the necessary number of times to allow progress to be made.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Stefan Hajnoczi
b9464ba19f blockdev: hold AioContext for bdrv_unref() in external_snapshot_clean()
bdrv_unref() requires the AioContext lock because bdrv_flush() uses
BDRV_POLL_WHILE(), which assumes the AioContext is currently held.  If
BDRV_POLL_WHILE() runs without AioContext held the
pthread_mutex_unlock() call in aio_context_release() fails.

This patch moves bdrv_unref() into the AioContext locked region to solve
the following pthread_mutex_unlock() failure:

  #0  0x00007f566181969b in raise () at /lib64/libc.so.6
  #1  0x00007f566181b3b1 in abort () at /lib64/libc.so.6
  #2  0x00005592cd590458 in error_exit (err=<optimized out>, msg=msg@entry=0x5592cdaf6d60 <__func__.23977> "qemu_mutex_unlock") at util/qemu-thread-posix.c:36
  #3  0x00005592cd96e738 in qemu_mutex_unlock (mutex=mutex@entry=0x5592ce9505e0) at util/qemu-thread-posix.c:96
  #4  0x00005592cd969b69 in aio_context_release (ctx=ctx@entry=0x5592ce950580) at util/async.c:507
  #5  0x00005592cd8ead78 in bdrv_flush (bs=bs@entry=0x5592cfa87210) at block/io.c:2478
  #6  0x00005592cd89df30 in bdrv_close (bs=0x5592cfa87210) at block.c:3207
  #7  0x00005592cd89df30 in bdrv_delete (bs=0x5592cfa87210) at block.c:3395
  #8  0x00005592cd89df30 in bdrv_unref (bs=0x5592cfa87210) at block.c:4418
  #9  0x00005592cd6b7f86 in qmp_transaction (dev_list=<optimized out>, has_props=<optimized out>, props=<optimized out>, errp=errp@entry=0x7ffe4a1fc9d8) at blockdev.c:2308

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Manos Pitsidianakis
022cdc9f40 block: move ThrottleGroup membership to ThrottleGroupMember
This commit eliminates the 1:1 relationship between BlockBackend and
throttle group state.  Users will be able to create multiple throttle
nodes, each with its own throttle group state, in the future.  The
throttle group state cannot be per-BlockBackend anymore, it must be
per-throttle node. This is done by gathering ThrottleGroup membership
details from BlockBackendPublic into ThrottleGroupMember and refactoring
existing code to use the structure.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-05 16:47:51 +02:00
Marc-André Lureau
f7abe0ecd4 qapi: Change data type of the FOO_lookup generated for enum FOO
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.

A future patch will generate enums with "holes".  NULL-termination
will cease to work then.

To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.

The sentinel will be dropped next.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
2017-09-04 13:09:13 +02:00
Markus Armbruster
977c736f80 qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04 13:09:13 +02:00
Markus Armbruster
5b5f825d44 qapi: Generate FOO_str() macro for QAPI enum FOO
The next commit will put it to use.  May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04 13:09:13 +02:00
Markus Armbruster
06c60b6c46 qapi: Drop superfluous qapi_enum_parse() parameter max
The lookup tables have a sentinel, no need to make callers pass their
size.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
2017-09-04 13:09:13 +02:00
Markus Armbruster
c42e8742f5 block: Use JSON null instead of "" to disable backing file
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name).  BlockdevRef
value "" is special: "no block device should be referenced."  It's
actually interpreted that way in just one place: optional member
@backing of COW formats.  Semantics:

* Present means "use this block device" as backing storage

* Absent means "default to the one stored in the image"

* Except "" means "don't use backing storage at all"

The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.

The third one overloads the parameter with a second meaning.  The
overloading is *implicit*, i.e. it's not visible in the types.  Works
here, because "" is not a value block device ID.

Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist.  I also find it
ugly.

To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing.  This commit implements
the latter: add JSON null to the values of @backing, deprecate "".

Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null.  Works, because BlockdevRef
occurs only within arguments of blockdev-add.  The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null.  Add a TODO comment for
that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-24 13:35:11 +02:00
John Snow
2a32c6e82e blockdev: move BDRV_O_NO_BACKING option forward
For both external_snapshot_prepare and qmp_drive_mirror, we eventually
append the option BDRV_O_NO_BACKING. However, we generally do so after
we create the image.

To accommodate image creation wanting to verify that a backing file
exists or not, add this option prior to create to override checking
the existence of the backing file. This prevents QEMU from trying to
re-open a backing file that's already in use (thanks to qcow2 locking).

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-18 15:27:20 +02:00
Peter Maydell
a309b290aa Error reporting patches for 2017-07-13
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZZ1/BAAoJEDhwtADrkYZTo7oP+gLj4B4kkp/DJnkzfuMMD1Ce
 ZPddZ8Z9RyXE4fS66sq1ODBQo5U+aQQZO7K234+jf8V4cKWW98lpVzLc3YdAHm2U
 ZF6Z9Rji5K4414ZsUcg92Zlovvdaji+mY0ooINav+4mqlONYrz29ntApWc0e0tGc
 e3tj4XDLhJrOM+mIx8vzixFlgSYj+6HgEiybYwolEK5svQbIQao3Y2omyb+zy0w0
 RDT3XQnAAaZSOQAXcJGkhekkyMe0jMHOF0tULLx1uDQYctg9mUGlAGTZ5oTLgSve
 TCpSJwWCAx8XAJMkXyDRrdRFDLeUh6yGY7NTqAL3OuPSoAw9ygKrHyhTavxBJL+W
 rX7Qit3dmVrlZLviwNFQplAKYb10d08vBoKXmrnW5oVCmPEDvJIQfncbucpA/CNS
 ucdJ3RMLuDbbWdl+5tsL7jfiZAG7oSgAePTjN1rm0bDe5JN7NAU8WzHnKfE83iZq
 R+I3hofqGoiXSByYRLamZb+6nsURAxWPhcqcw7hdMsk7UI6dyZwWl9Fnm72w0BZK
 M5LHLkX0LYc+kZjiLKXlNK7Z50bXY0zKQpPCLH3nHA69iMiwVoozrjwa9iCKIxE+
 7ZlOfsu4ztExuicEyTr8b27CBrHjJjYDuFP0hroEOzqCKXUzegoq3oYMGP0doXxe
 o3xcwXVKT/1PudddyR4z
 =tByN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2017-07-13' into staging

Error reporting patches for 2017-07-13

# gpg: Signature made Thu 13 Jul 2017 12:55:45 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2017-07-13:
  Convert error_report*_err() to warn_report*_err()
  error: Implement the warn and free Error functions
  char-socket: Report TCP socket waiting as information
  Convert error_report() to warn_report()
  error: Functions to report warnings and informational messages
  util/qemu-error: Rename error_print_loc() to be more generic
  websock: Don't try to set *errp directly
  block: Don't try to set *errp directly
  xilinx: Fix latent error handling bug

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 09:36:40 +01:00
Alistair Francis
3dc6f86936 Convert error_report() to warn_report()
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.

All of the warnings were changed using these two commands:
    find ./* -type f -exec sed -i \
      's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-13 13:49:58 +02:00
Max Reitz
3a691c50f1 block: Add PreallocMode to blk_truncate()
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Vladimir Sementsov-Ogievskiy
5c36c1af27 qmp: block-dirty-bitmap-remove: remove persistent
Remove persistent bitmap from the storage on block-dirty-bitmap-remove.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-30-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
a3b52535e8 qmp: add x-debug-block-dirty-bitmap-sha256
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-26-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
eb738bb50f qmp: add autoload parameter to block-dirty-bitmap-add
Optional. Default is false.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-25-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
fd5ae4ccbe qmp: add persistent flag to block-dirty-bitmap-add
Add optional 'persistent' flag to qmp command block-dirty-bitmap-add.
Default is false.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-24-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
d6883bc968 block/dirty-bitmap: add readonly field to BdrvDirtyBitmap
It will be needed in following commits for persistent bitmaps.
If bitmap is loaded from read-only storage (and we can't mark it
"in use" in this storage) corresponding BdrvDirtyBitmap should be
read-only.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:58 +02:00
Daniel P. Berrange
c01c214b69 block: remove all encryption handling APIs
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Thomas Huth
c616f16e0c blockdev: Print a warning for legacy drive options that belong to -device
We likely do not want to carry these legacy -drive options along forever.
Let's emit a deprecation warning for the -drive options that have a
replacement with the -device option, so that the (hopefully few) remaining
users are aware of this and can adapt their scripts / behaviour accordingly.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10 13:18:06 +02:00
Peter Maydell
84e3d0725b QAPI patches for 2017-06-09
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZSRWrAAoJEDhwtADrkYZTVOQP/RK8br2A1Cn7LeVG6jnKz5hJ
 OqyII77x8I2RachWvnwxQeHPMEVDuz3y2WjL+80s6peXlpR6y/13w7oX0f6aiJuo
 +T9khTqMv2I7HsM5UCsXAJpFPHT7r90b4x8nstY80YLGe7lA7L6yk6PGyCxHThwA
 mOiTKDw6/Xb/yZGrS2Favrun7juNpAs0Ec1IAkaA8xsEgVkd6tDv281rmHqvibl/
 //90VfJp3nHFZ12FCQ1HzA42Eigtmo/fIk9LnAzBoYG0zw0cnzjuv0BNzs/JwuUZ
 /VskeD1cViQ4yzFnPpjOavjYjTN854/JTJzm7gZ7dTQ6/l3ykoY6NDE8p1BLuHlC
 p2RKkg20EeZlpOEtMQ4g6iyG6EUxaKcEiXmQ31LqN/LJwxTYbo5B5nCHMjrt4gxe
 MqFBJQSNsJ7QjZ7Qa7pADMCi/G0m7/0dN8vBqSr4vcbLVvdbw/yb/9s33wXGrUj1
 PyXM2ymi+vvSqcXtNXKshsJLxJSJxO1tm2tRIANDTabQ00yxs8dOYnQnbQFR94fp
 6nrE2PnjZqgqk69aNDJEbngj6Tgx44nyTr1+Q17juZf9nTCE5QmBE1J0IRoykCJn
 E8+T63ZxtIxVV2yLi5xBjmZaZtPyJRGGeUXunA10SuWrHzupEcBuhFhFYd2MFM5L
 fsojALN2K3Gdx2+CmAo2
 =O9Vv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging

QAPI patches for 2017-06-09

# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
  tests/qdict: check more get_try_int() cases
  console: use get_uint() for "head" property
  i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
  numa: use get_uint() for "size" property
  pnv-core: use get_uint() for "core-pir" property
  pvpanic: use get_uint() for "ioport" property
  auxbus: use get_uint() for "addr" property
  arm: use get_uint() for "mp-affinity" property
  xen: use get_uint() for "max-ram-below-4g" property
  pc: use get_uint() for "hpet-intcap" property
  pc: use get_uint() for "apic-id" property
  pc: use get_uint() for "iobase" property
  acpi: use get_uint() for "pci-hole*" properties
  acpi: use get_uint() for various acpi properties
  acpi: use get_uint() for "acpi-pcihp-io*" properties
  platform-bus: use get_uint() for "addr" property
  bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
  aspeed: use {set, get}_uint() for "ram-size" property
  pcihp: use get_uint() for "bsel" property
  pc-dimm: make "size" property uint64
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-22 11:34:39 +01:00
Marc-André Lureau
01b2ffcedd qapi: merge QInt and QFloat in QNum
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.

Add a few more tests while at it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:31 +02:00
Paolo Bonzini
9caa6f3dbe block: split BlockAcctStats creation and setup
block_acct_destroy is called unconditionally in blk_delete, but there is
no BlockAcctStats function that is called unconditionally in blk_new.
Split block_acct_init in two, so that it will be possible to create a
QemuMutex in block_acct_init and destroy it in block_acct_cleanup.

Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-19-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16 07:55:00 +08:00
Paolo Bonzini
2119882c7e block: introduce dirty_bitmap_mutex
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16 07:55:00 +08:00
Paolo Bonzini
d3faa13e5f block: access copy_on_read with atomic ops
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-2-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16 07:55:00 +08:00
Jeff Cody
719fc28c80 block: fix external snapshot abort permission error
In external_snapshot_abort(), we try to undo what was done in
external_snapshot_prepare() calling bdrv_replace_node() to swap the
nodes back.  However, we receive a permissions error as writers are
blocked on the old node, which is now the new node backing file.

An easy fix (initially suggested by Kevin Wolf) is to call
bdrv_set_backing_hd() on the new node, to set the backing node to NULL.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-09 13:46:20 +02:00
Paolo Bonzini
2caf63a903 blockjob: move iostatus reset inside block_job_user_resume
Outside blockjob.c, the block_job_iostatus_reset function is used once
in the monitor and once in BlockBackend.  When we introduce the block
job mutex, block_job_iostatus_reset's client is going to be the block
layer (for which blockjob.c will take the block job mutex) rather than
the monitor (which will take the block job mutex by itself).

The monitor's call to block_job_iostatus_reset from the monitor comes
just before the sole call to block_job_user_resume, so reset the
iostatus directly from block_job_iostatus_reset.  This will avoid
the need to introduce separate block_job_iostatus_reset and
block_job_iostatus_reset_locked APIs.

After making this change, move the function together with the others
that were moved in the previous patch.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170508141310.8674-7-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-24 16:38:51 -04:00
John Snow
698bdfa07d blockdev: use drained_begin/end for qmp_block_resize
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1447551

If one tries to issue a block_resize while a guest is busy
accessing the disk, it is possible that qemu may deadlock
when invoking aio_poll from both the main loop and the iothread.

Replace another instance of bdrv_drain_all that doesn't
quite belong.

Cc: qemu-stable@nongnu.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11 12:08:24 +02:00
Fam Zheng
fc0932fdcf block: Reuse bs as backing hd for drive-backup sync=none
Opening the backing image for the second time is bad, especially here
when it is also in use as the active image as the source. The
drive-backup job itself doesn't read from target->backing for COW,
instead it gets data from the write notifier, so it's not a big problem.
However, exporting the target to NBD etc. won't work, because of the
likely stale metadata cache.

Use BDRV_O_NO_BACKING in this case and manually set up the backing
BdrvChild.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11 11:15:32 +02:00
Eric Blake
46f5ac205a qobject: Use simpler QDict/QList scalar insertion macros
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.

Patch created mechanically via:
  spatch --sp-file scripts/coccinelle/qobject.cocci \
    --macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09 09:13:51 +02:00
Max Reitz
ed3d2ec98a block: Add errp to b{lk,drv}_truncate()
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28 16:02:02 +02:00
Fam Zheng
78bbd910bb block: Make errp the last parameter of commit_active_start
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-9-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24 09:13:44 +02:00
Fam Zheng
9217283dc8 block: Make errp the last parameter of bdrv_img_create
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-6-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24 09:12:59 +02:00
Fam Zheng
c26a5ab713 block: Fix unpaired aio_disable_external in external snapshot
bdrv_replace_child_noperm tries to hand over the quiesce_counter state
from old bs to the new one, but if they are not on the same aio context
this causes unbalance.

Fix this by setting the correct aio context before calling
bdrv_append().

Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-04-07 14:44:06 +02:00
Markus Armbruster
79b7a77eda block: Declare blockdev-add and blockdev-del supported
It's been a long journey, but here we are.

The supported blockdev-add is not compatible to its experimental
predecessors; bump all Since: tags to 2.9.

x-blockdev-remove-medium, x-blockdev-insert-medium and
x-blockdev-change need a bit more work, so leave them alone for now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-28 15:23:23 +02:00
John Snow
184dd9c49b blockdev: fix bitmap clear undo
Only undo the action if we actually prepared the action.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-17 12:54:06 +01:00
Kevin Wolf
5fe31c25cc block: Fix error handling in bdrv_replace_in_backing_chain()
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().

Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-07 14:53:28 +01:00
Kevin Wolf
067acf28d1 block: Fix blockdev-snapshot error handling
For blockdev-snapshot, external_snapshot_prepare() accepts an arbitrary
node reference at first and only checks later whether it already has a
backing file. Between those places, other errors can occur.

Therefore checking in external_snapshot_abort() whether state->new_bs
has a backing file is not sufficient to tell whether bdrv_append() was
already completed or not. Trying to undo the bdrv_append() when it
wasn't even executed is wrong.

Introduce a new boolean flag in the state to fix this.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-07 14:53:28 +01:00
Kevin Wolf
b2c2832c61 block: Add Error parameter to bdrv_append()
Aborting on error in bdrv_append() isn't correct. This patch fixes it
and lets the callers handle failures.

Test case 085 needs a reference output update. This is caused by the
reversed order of bdrv_set_backing_hd() and change_parent_backing_link()
in bdrv_append(): When the backing file of the new node is set, the
parent nodes are still pointing to the old top, so the backing blocker
is now initialised with the node name rather than the BlockBackend name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28 20:47:51 +01:00
Kevin Wolf
0db832f42e commit: Add filter-node-name to block-commit
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.

This new option to blockdev-commit allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28 20:47:50 +01:00
Kevin Wolf
6cdbceb12c mirror: Add filter-node-name to blockdev-mirror
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.

This new option to blockdev-mirror allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28 20:47:50 +01:00
Kevin Wolf
39829a01ae block: Allow error return in BlockDevOps.change_media_cb()
Some devices allow a media change between read-only and read-write
media. They need to adapt the permissions in their .change_media_cb()
implementation, which can fail. So add an Error parameter to the
function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28 20:40:36 +01:00
Kevin Wolf
d7086422b1 block: Add error parameter to blk_insert_bs()
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28 20:40:36 +01:00
Kevin Wolf
6d0eb64d5c block: Add permissions to blk_new()
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.

The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().

This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28 20:40:36 +01:00
Pradeep Jagadeesh
a2a7862ca9 throttle: factor out duplicate code
This patch removes the redundant throttle code that was present in
block and fsdev device files. Now the common code is moved
to a single file.

Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(fix indent nit, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
2017-02-28 10:31:46 +01:00
Kevin Wolf
7dad9ee646 blockdev: Use BlockBackend to resize in qmp_block_resize()
In order to be able to do permission checking and to keep working with
the BdrvChild based bdrv_truncate() that this involves, we need to
create a temporary BlockBackend to resize the image.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-24 16:09:23 +01:00
Markus Armbruster
720b8dc052 blockdev: Make orphaned -drive fatal
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.

If machine initialization code doesn't comply, the block backend
remains unused.  This triggers a warning since commit a66c9dc, v2.2.0.
Drives created by default are exempted; use -nodefaults to get rid of
them.

Turn this warning into an error.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487153147-11530-8-git-send-email-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2017-02-21 13:17:45 +01:00
Markus Armbruster
664cc623bf blockdev: Improve message for orphaned -drive
We warn when a -drive isn't supported by the machine type (commit
a66c9dc):

    $ qemu-system-x86_64 -S -display none -drive if=mtd
    Warning: Orphaned drive without device: id=mtd0,file=,if=mtd,bus=0,unit=0

Improve this to point to the offending bit of configuration:

    qemu-system-x86_64: -drive if=mtd: warning: machine type does not support if=mtd,bus=0,unit=0

Especially nice when it's hidden behind -readconfig foo.cfg:

    qemu-system-x86_64:foo.cfg:140: warning: machine type does not support if=mtd,bus=0,unit=0

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487153147-11530-7-git-send-email-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2017-02-21 13:17:40 +01:00
Daniel P. Berrange
0ab8ed18a6 trace: switch to modular code generation for sub-directories
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.

The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31 17:11:18 +00:00
John Snow
111049a4ec blockjob: refactor backup_start as backup_job_create
Refactor backup_start as backup_job_create, which only creates the job,
but does not automatically start it. The old interface, 'backup_start',
is not kept in favor of limiting the number of nearly-identical interfaces
that would have to be edited to keep up with QAPI changes in the future.

Callers that wish to synchronously start the backup_block_job can
instead just call block_job_start immediately after calling
backup_job_create.

Transactions are updated to use the new interface, calling block_job_start
only during the .commit phase, which helps prevent race conditions where
jobs may finish before we even finish building the transaction. This may
happen, for instance, during empty block backup jobs.

Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1478587839-9834-6-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-14 22:47:34 -05:00
John Snow
0df4ba5863 Blockjobs: Internalize user_pause logic
BlockJobs will begin hiding their state in preparation for some
refactorings anyway, so let's internalize the user_pause mechanism
instead of leaving it to callers to correctly manage.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-6-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01 07:55:57 -04:00
John Snow
8254b6d953 blockjob: centralize QMP event emissions
There's no reason to leave this to blockdev; we can do it in blockjobs
directly and get rid of an extra callback for most users.

All non-internal events, even those created outside of QMP, will
consistently emit events.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-5-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01 07:55:57 -04:00
John Snow
47970dfb0a Replication/Blockjobs: Create replication jobs as internal
Bubble up the internal interface to commit and backup jobs, then switch
replication tasks over to using this methodology.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01 07:55:57 -04:00
John Snow
559b935f8c blockjobs: hide internal jobs from management API
If jobs are not created directly by the user, do not allow them to be
seen by the user/management utility. At the moment, 'internal' jobs are
those that do not have an ID. As of this patch it is impossible to
create such jobs.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1477584421-1399-2-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01 07:55:57 -04:00
Alberto Garcia
312fe09cc8 block: Add 'base-node' parameter to the 'block-stream' command
The way to specify the node from which to copy data in the
block-stream operation is by using the 'base' parameter. This
parameter however takes a file name, not a node name.

Since we want to be able to perform this operation using only node
names, this patch adds a new 'base-node' parameter.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31 16:52:39 +01:00
Alberto Garcia
554b614765 block: Add QMP support for streaming to an intermediate layer
This patch makes the 'device' parameter of the 'block-stream' command
accept a node name that is not a root node. The presence of this
feature can't be directly tested with introspection; soon we'll
introduce a 'base-node' parameter whose presence can be checked for
this purpose.

In addition to that, operation blockers will be checked in all
intermediate nodes between the top and the base node.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31 16:52:38 +01:00
Alberto Garcia
058223a6e3 block: Check blockers in all nodes involved in a block-commit job
qmp_block_commit() checks for op blockers in the active and
destination (base) images. However all nodes between top_bs and base
are also involved, and they are removed from the chain afterwards.

In addition to that, if top_bs is not the active layer then top_bs's
overlay also needs to be checked because it's involved in the job (its
backing image string needs to be updated to point to 'base').

This patch checks that none of those nodes are blocked.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31 16:52:38 +01:00
Daniel P. Berrange
7d5e199ade qapi: rename QmpOutputVisitor to QObjectOutputVisitor
The QmpOutputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one wants a QObject. Rename it
to better reflect its functionality as a generic QAPI
to QObject converter.

The commit before previous renamed the files, this one renames C
identifiers.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file rename and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25 16:25:54 +02:00
Daniel P. Berrange
b3db211f3c qapi: rename *qmp-*-visitor* to *qobject-*-visitor*
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.

This is the first of three parts: rename the files.  The next two
parts will rename C identifiers.  The split is necessary to make git
rename detection work.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25 16:25:48 +02:00
Kevin Wolf
74e1ae7c0b block: Remove qemu_root_bds_opts
The remaining options in qemu_root_bds_opts (aio and copy-on-read)
aren't used any more, the QAPI schema doesn't contain them. Therefore
all the code processing qemu_root_bds_opts options is dead and can be
removed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29 14:13:39 +02:00
Kevin Wolf
818584a43a block: Move 'discard' option to bdrv_open_common()
This enables its use for nested child nodes. The compatibility
between the 'discard' and 'detect-zeroes' setting is checked in
bdrv_open_common() now as the former setting isn't available before
calling bdrv_open() any more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29 14:13:39 +02:00
Kevin Wolf
b85114f8cf block: Use 'detect-zeroes' option for 'blockdev-change-medium'
Instead of modifying the new BDS after it has been opened, use the newly
supported 'detect-zeroes' option in bdrv_open_common() so that all
requirements are checked (detect-zeroes=unmap requires discard=unmap).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29 14:13:39 +02:00
Kevin Wolf
692e01a27c block: Parse 'detect-zeroes' in bdrv_open_common()
Amongst others, this means that you can now use the 'detect-zeroes'
option for non-top-level nodes in blockdev-add, like the QAPI schema
promises.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29 14:13:39 +02:00
Kevin Wolf
0ffcdd9c06 block: Drop aio/cache consistency check from qmp_blockdev_add()
The TODO comment has been addressed a while ago and this is now checked
in raw-posix, so we don't have to special case this in blockdev-add any
more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29 14:13:38 +02:00
Kevin Wolf
24df38b00e block: Fix error path in qmp_blockdev_change_medium()
Commit 00949bab incorrectly changed one instance of &err into errp while
touching the line. Change it back.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29 14:13:38 +02:00
Kevin Wolf
9ec8873e68 block: Remove BB interface from blockdev-add/del
With this patch, blockdev-add always works on a node level, i.e. it
creates a BDS, but no BB. Consequently, x-blockdev-del doesn't need the
'device' option any more, but 'node-name' becomes mandatory.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-23 13:45:36 +02:00
Kevin Wolf
e467da7b92 block: Avoid printing NULL string in error messages
Even for nodes that have a BlockBackend attached, bdrv_get_parent_name()
can return NULL if the BB is anonymous (e.g. it belongs to a block job
or a device that was created with a drive=<node-name> option).

Remove the information from the error message. The user probably knows
already why the node is still in use.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-23 13:45:36 +02:00
Kevin Wolf
7a9877a026 block: Accept device model name for block_set_io_throttle
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.

This converts block_set_io_throttle to accept a qdev device name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:44:54 +02:00
Kevin Wolf
70e2cb3bd7 block: Accept device model name for blockdev-change-medium
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.

This converts blockdev-change-medium to accept a qdev device name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:44:47 +02:00
Kevin Wolf
fbe2d8163e block: Accept device model name for eject
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.

This converts eject to accept a qdev device name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:40:45 +02:00
Kevin Wolf
00949babe9 block: Accept device model name for x-blockdev-remove-medium
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.

This converts x-blockdev-remove-medium to accept a qdev device name.

As the command is experimental, we can still remove the 'device' option
that uses the BlockBackend name. This requires some test case changes
and is left for another series.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:36:10 +02:00
Kevin Wolf
716df21707 block: Accept device model name for x-blockdev-insert-medium
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.

This converts x-blockdev-insert-medium to accept a qdev device name.

As the command is experimental, we can still remove the 'device' option
that uses the BlockBackend name. This requires some test case changes
and is left for another series.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:36:10 +02:00
Kevin Wolf
b33945cfff block: Accept device model name for blockdev-open/close-tray
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.

This converts blockdev-open/close-tray to accept a qdev device name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:36:10 +02:00
Alberto Garcia
4e200cf8e6 block: rename "read-only" to BDRV_OPT_READ_ONLY
There were a few instances left. After this patch we're using the
macro in all places.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:36:10 +02:00
Alberto Garcia
f87a0e29a9 block: Add "read-only" to the options QDict
This adds the "read-only" option to the QDict. One important effect of
this change is that when a child inherits options from its parent, the
existing "read-only" mode can be preserved if it was explicitly set
previously.

This addresses scenarios like this:

   [E] <- [D] <- [C] <- [B] <- [A]

In this case, if we reopen [D] with read-only=off, and later reopen
[B], then [D] will not inherit read-only=on from its parent during the
bdrv_reopen_queue_child() stage.

The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the
value of the "read-only" option.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:36:10 +02:00
Peter Maydell
8212ff86f4 * minor patches here and there
* MTTCG: lock-free TB lookup
 * SCSI: bugfixes for MPTSAS, MegaSAS, LSI53c, vmw_pvscsi
 * buffer_is_zero rewrite (except for one patch)
 * chardev: qemu_chr_fe_write checks
 * checkpatch improvement for markdown preformatted text
 * default-configs cleanups
 * atomics cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJX2DP2AAoJEL/70l94x66DIBYH/2pW+/HYexCobNn9eVD0Wm08
 im0mRHIU0vjfTaeZSasJPXvA2FyYQLl9KnSFvUFcRiLILpp+hE3QdZ8o0QGlfAmE
 +5MWsPJDXMbOaCOfMKZpZvPfJ6q/lSTg6eiJTPiRgyU7fQgjMDAot1s44ETYGVRu
 myeheEvjSwm/aT9sRIUK6KC7LWXGHFYRYzYJDnvoN6svHZ10DcEDhve8bdmixFk0
 0zUY4RmPk8n46SntDG65tgAlKlzfSuPOesvbpcQIYe1H+r+uJt9BST7MjKdbdDQv
 b/LDzMx8CTbd2tDPL6JWgjBGBZ6SZ4Q6x0a45kzJRtkS+BPtNeGGzBVwULVN4RY=
 =eAJS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* minor patches here and there
* MTTCG: lock-free TB lookup
* SCSI: bugfixes for MPTSAS, MegaSAS, LSI53c, vmw_pvscsi
* buffer_is_zero rewrite (except for one patch)
* chardev: qemu_chr_fe_write checks
* checkpatch improvement for markdown preformatted text
* default-configs cleanups
* atomics cleanups

# gpg: Signature made Tue 13 Sep 2016 18:14:30 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (58 commits)
  cutils: Add generic prefetch
  cutils: Add SSE4 version
  cutils: Add test for buffer_is_zero
  cutils: Remove ppc buffer zero checking
  cutils: Remove aarch64 buffer zero checking
  cutils: Rearrange buffer_is_zero acceleration
  cutils: Export only buffer_is_zero
  cutils: Remove SPLAT macro
  cutils: Move buffer_is_zero and subroutines to a new file
  ppc: do not redefine CPUPPCState
  x86/lapic: Load LAPIC state at post_load
  optionrom: do not rely on compiler's bswap optimization
  checkpatch: Fix whitespace checks for documentation code blocks
  atomics: Use __atomic_*_n() variant primitives
  atomics: Remove redundant barrier()'s
  kvm-all: drop kvm_setup_guest_memory
  i8257: Make device "i8257" unavailable with -device
  Revert "megasas: remove useless check for cmd->frame"
  char: convert qemu_chr_fe_write to qemu_chr_fe_write_all
  hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

 Conflicts:
	cpus.c
	tests/Makefile.include
2016-09-15 10:24:22 +01:00
Igor Mammedov
3b8c1761f0 qtail: clean up direct access to tqe_prev field
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:08:41 +02:00
Wen Congyang
b49f7ead8d mirror: auto complete active commit
Auto complete mirror job in background to prevent from
blocking synchronously

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Message-id: 1469602913-20979-7-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-13 11:00:56 +01:00
Pavel Butsykin
3b7b123659 blockdev-backup: added support for data compression
The idea is simple - backup is "written-once" data. It is written block
by block and it is large enough. It would be nice to save storage
space and compress it.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05 19:06:48 +02:00
Pavel Butsykin
13b9414b57 drive-backup: added support for data compression
The idea is simple - backup is "written-once" data. It is written block
by block and it is large enough. It would be nice to save storage
space and compress it.

The patch adds a flag to the qmp/hmp drive-backup command which enables
block compression. Compression should be implemented in the format driver
to enable this feature.

There are some limitations of the format driver to allow compressed writes.
We can write data only once. Though for backup this is perfectly fine.
These limitations are maintained by the driver and the error will be
reported if we are doing something wrong.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05 19:06:48 +02:00
Pavel Butsykin
dc7a4a9ed1 block: simplify blockdev-backup
Now that we can support boxed commands, use it to greatly reduce the
number of parameters (and likelihood of getting out of sync) when
adjusting blockdev-backup parameters.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05 19:06:48 +02:00
Pavel Butsykin
81206a8987 block: simplify drive-backup
Now that we can support boxed commands, use it to greatly reduce the
number of parameters (and likelihood of getting out of sync) when
adjusting drive-backup parameters.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05 19:06:48 +02:00
Kevin Wolf
0524e93a3f block: Accept node-name for drive-mirror
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
drive-mirror to accept a node-name without lifting the restriction that
we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
b7e4fa2242 block: Accept node-name for drive-backup
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
drive-backup and the corresponding transaction action to accept a
node-name without lifting the restriction that we're operating at a root
node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
7b5dca3f02 block: Accept node-name for change-backing-file
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
change-backing-file to accept a node-name without lifting the
restriction that we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
75dfd402a7 block: Accept node-name for blockdev-snapshot-internal-sync
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-snapshot-internal-sync to accept a node-name without lifting
the restriction that we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
2dfb4c033f block: Accept node-name for blockdev-snapshot-delete-internal-sync
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-snapshot-delete-internal-sync to accept a node-name without
lifting the restriction that we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
07eec65272 block: Accept node-name for blockdev-mirror
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-mirror to accept a node-name without lifting the restriction
that we're operating at a root node.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
cef34eebf3 block: Accept node-name for blockdev-backup
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-backup and the corresponding transaction action to accept a
node-name without lifting the restriction that we're operating at a root
node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
1d13b167fd block: Accept node-name for block-commit
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-commit to accept a node-name without lifting the restriction that
we're operating at a root node.

As libvirt makes use of the DeviceNotFound error class, we must add
explicit code to retain this behaviour because qmp_get_root_bs() only
returns GenericErrors.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
b6c1bae5df block: Accept node-name for block-stream
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-stream to accept a node-name without lifting the restriction that
we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2016-09-05 19:06:47 +02:00
Kevin Wolf
39d990ac38 block: Accept any target node for transactional blockdev-backup
Commit 0d978913 changed blockdev-backup to accept arbitrary node names
instead of device names (i.e. root nodes) for the backup target.
However, it forgot to make the same change in transactions and to update
the documentation. This patch fixes these omissions.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-05 10:55:14 +02:00
Eric Blake
faecd40a59 block: Simplify drive-mirror
Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting drive-mirror parameters.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <1468535878-3760-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 13:21:09 +02:00
Eric Blake
4dc9397b62 block: Simplify block_set_io_throttle
Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting throttle parameters.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <1468468228-27827-11-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 13:21:08 +02:00
Alberto Garcia
ff356ee4da blockdev: Fix regression with the default naming of throttling groups
When I/O limits are set for a block device, the name of the throttling
group is taken from the BlockBackend if the user doesn't specify one.

Commit efaa7c4eeb moved the naming of the BlockBackend in
blockdev_init() to the end of the function, after I/O limits are set.
The consequence is that the throttling group gets an empty name.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
Message-id: af5cd58bd2c4b9f6c57f260d9cfe586b9fb7d34d.1467986342.git.berto@igalia.com
[mreitz: Use existing "id" variable instead of new "blk_id"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13 13:41:39 +02:00
Alberto Garcia
fd62c609ed commit: Add 'job-id' parameter to 'block-commit'
This patch adds a new optional 'job-id' parameter to 'block-commit',
allowing the user to specify the ID of the block job to be created.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13 13:26:02 +02:00
Alberto Garcia
2323322ed0 stream: Add 'job-id' parameter to 'block-stream'
This patch adds a new optional 'job-id' parameter to 'block-stream',
allowing the user to specify the ID of the block job to be created.

The HMP 'block_stream' command remains unchanged.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13 13:26:02 +02:00
Alberto Garcia
70559d499c backup: Add 'job-id' parameter to 'blockdev-backup' and 'drive-backup'
This patch adds a new optional 'job-id' parameter to 'blockdev-backup'
and 'drive-backup', allowing the user to specify the ID of the block
job to be created.

The HMP 'drive_backup' command remains unchanged.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13 13:26:02 +02:00
Alberto Garcia
71aa98678c mirror: Add 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror'
This patch adds a new optional 'job-id' parameter to 'blockdev-mirror'
and 'drive-mirror', allowing the user to specify the ID of the block
job to be created.

The HMP 'drive_mirror' command remains unchanged.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13 13:26:02 +02:00