Update the CSR permission checking to work correctly when we are in
HS-mode.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The v0.5 Hypervisor spec add new execption numbers, let's add support
for those.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
remove the check becuase SD bit should summarize FS and XS fields
unconditionally.
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Instead of relying on atomics to access the MIP register let's update
our helper function to instead just lock the IO mutex thread before
writing. This follows the same concept as used in PPC for handling
interrupts
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
If we are in debugger mode, skip the CSR privilege level checking
so that we can read/write all CSRs. Otherwise we get:
(gdb) p/x $mtvec
Could not fetch register "mtvec"; remote failure reply 'E14'
when the hart is currently in S-mode.
Reported-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is meant to mask off the hypervisor bits, but a typo caused it to
mask MPP instead.
Fixes: 1f0419cb04 ("target/riscv: Allow setting mstatus virtulisation bits")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Let's create a function that tests if floating point support is
enabled. We can then protect all floating point operations based on if
they are enabled.
This patch so far doesn't change anything, it's just preparing for the
Hypervisor support for floating point operations.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The various CSR instructions have been split out of the base ISA as part
of the ratification process. This patch adds a Zicsr argument, which
disables all the CSR instructions.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Add support for disabling/enabling the "Counters" extension.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
1.11 defines mcountinhibit, which has the same numeric CSR value as
mucounteren from 1.09.1 but has different semantics. This patch enables
the CSR for 1.11-based targets, which is trivial to implement because
the counters in QEMU never tick (legal according to the spec).
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Palmer: Fix counter access semantics, change commit message to indicate
the behavior is fully emulated.]
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Cleanup in the boilerplate that each target must define.
Replace riscv_env_get_cpu with env_archcpu. The combination
CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is an analogous change for ARM here:
https://patchwork.kernel.org/patch/10649857
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
According to the spec, "All bits besides SSIP, USIP, and UEIP in the sip
register are read-only." Further, if an interrupt is not delegated to mode x,
then "the corresponding bits in xip [...] should appear to be hardwired to
zero. This patch implements both of those requirements.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The requirement of holding the iothread_mutex is burdersome when
swapping the background and foreground registers in the Hypervisor
extension. To avoid the requrirement let's set the interrupt
asynchronously.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
If vectored interrupts are enabled (bits[1:0]
of mtvec/stvec == 1) then use the following
logic for trap entry address calculation:
pc = mtvec + cause * 4
In addition to adding support for vectored interrupts
this patch simplifies the interrupt delivery logic
by making sync/async cause decoding and encoding
steps distinct.
The cause code and the sign bit indicating sync/async
is split at the beginning of the function and fixed
cause is renamed to cause. The MSB setting for async
traps is delayed until setting mcause/scause to allow
redundant variables to be eliminated. Some variables
are renamed for conciseness and moved so that decls
are at the start of the block.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We can't allow the supervisor to control SEIP as this would allow the
supervisor to clear a pending external interrupt which will result in
lost a interrupt in the case a PLIC is attached. The SEIP bit must be
hardware controlled when a PLIC is attached.
This logic was previously hard-coded so SEIP was always masked even
if no PLIC was attached. This patch adds riscv_cpu_claim_interrupts
so that the PLIC can register control of SEIP. In the case of models
without a PLIC (spike), the SEIP bit remains software controlled.
This interface allows for hardware control of supervisor timer and
software interrupts by other interrupt controller models.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add a debugger field to CPURISCVState. Add riscv_csrrw_debug function
to set it. Disable mode checks when debugger field true.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190212230903.9215-1-jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Access to a counter in U-mode is permitted only if the corresponding
bit is set in both mcounteren and scounteren. The current code
ignores mcounteren and checks scounteren only for U-mode access.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch adds support for writing misa. misa is validated based
on rules in the ISA specification. 'E' is mutually exclusive with
all other extensions. 'D' depends on 'F' so 'D' bit is dropped
if 'F' is not present. A conservative approach to consistency is
taken by flushing the translation cache on misa writes. misa_mask
is added to the CPU struct to store the original set of extensions.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
* Add riscv prefix to raise_exception function
* Add riscv prefix to CSR read/write functions
* Add riscv prefix to signal handler function
* Add riscv prefix to get fflags function
* Remove redundant declaration of riscv_cpu_init
and rename cpu_riscv_init to riscv_cpu_init
* rename riscv_set_mode to riscv_cpu_set_mode
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds the necessary minimum to support S-mode
virtualization for priv ISA >= v1.10
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Matthew Suozzo <msuozzo@google.com>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Modifed from Richard Henderson's patch [1] to integrate
with the new control and status register implementation.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg07034.html
Note: the f* CSRs already mark mstatus.FS dirty using
env->mstatus |= mstatus.FS so the bug in the first
spin of this patch has been fixed in a prior commit.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
CSR predicate functions are added to the CSR table.
mstatus.FS and counter enable checks are moved
to predicate functions and two new predicates are
added to check misa.S for s* CSRs and a new PMP
CPU feature for pmp* CSRs.
Processors that don't implement S-mode will trap
on access to s* CSRs and processors that don't
implement PMP will trap on accesses to pmp* CSRs.
PMP checks are disabled in riscv_cpu_handle_mmu_fault
when the PMP CPU feature is not present.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the new CSR read/modify/write interface to implement
atomic updates to mip/sip.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Previous CSR code uses csr_read_helper and csr_write_helper
to update CSR registers however this interface prevents
atomic read/modify/write CSR operations; in addition
there is no trap-free method to access to CSRs due
to the monolithic CSR functions call longjmp.
The current iCSR interface is not safe to be called by
target/riscv/gdbstub.c as privilege checks or missing CSRs
may call longjmp to generate exceptions. It needs to
indicate existence so traps can be generated in the
CSR instruction helpers.
This commit moves CSR access from the monolithic switch
statements in target/riscv/op_helper.c into modular
read/write functions in target/riscv/csr.c using a new
function pointer table for dispatch (which can later
be used to allow CPUs to hook up model specific CSRs).
A read/modify/write interface is added to support atomic
CSR operations and a non-trapping interface is added
to allow exception-free access to CSRs by the debugger.
The CSR functions and CSR dispatch table are ordered
to match The RISC-V Instruction Set Manual, Volume II:
Privileged Architecture Version 1.10, 2.2 CSR Listing.
An API is added to allow derived cpu instances to modify
or implement new CSR operations.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
