Drop the old Sysbus init and use instance_init and
DeviceClass::realize instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a return value to the event handler. Some I2C devices will
NAK if they have no data, so allow them to do this. This required
the following changes:
Go through all the event handlers and change them to return int
and return 0.
Modify i2c_start_transfer to terminate the transaction on a NAK.
Modify smbus handing to not assert if a NAK occurs on a second
operation, and terminate the transaction and return -1 instead.
Add some information on semantics to I2CSlaveClass.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current code that handles Tx buffer desciprtor ring scanning employs the
following algorithm:
1. Restore current buffer descriptor pointer from TBPTRn
2. Process current descriptor
3. If current descriptor has BD_WRAP flag set set current
descriptor pointer to start of the descriptor ring
4. If current descriptor points to start of the ring exit the
loop, otherwise increment current descriptor pointer and go
to #2
5. Store current descriptor in TBPTRn
The way the code is implemented results in buffer descriptor ring being
scanned starting at offset/descriptor #0. While covering 99% of the
cases, this algorithm becomes problematic for a number of edge cases.
Consider the following scenario: guest OS driver initializes descriptor
ring to N individual descriptors and starts sending data out. Depending
on the volume of traffic and probably guest OS driver implementation it
is possible that an edge case where a packet, spread across 2
descriptors is placed in descriptors N - 1 and 0 in that order(it is
easy to imagine similar examples involving more than 2 descriptors).
What happens then is aforementioned algorithm starts at descriptor 0,
sees a descriptor marked as BD_LAST, which it happily sends out as a
separate packet(very much malformed at this point) then the iteration
continues and the first part of the original packet is tacked to the
next transmission which ends up being bogus as well.
This behvaiour can be pretty reliably observed when scp'ing data from a
guest OS via TAP interface for files larger than 160K (every time for
700K+).
This patch changes the scanning algorithm to do the following:
1. Restore "current" buffer descriptor pointer from
TBPTRn
2. If "current" descriptor does not have BD_TX_READY set, goto #6
3. Process current descriptor
4. If "current" descriptor has BD_WRAP flag set "current"
descriptor pointer to start of the descriptor ring otherwise
set increment "current" by the size of one descriptor
5. Goto #1
6. Save "current" buffer descriptor in TBPTRn
This way we preserve the information about which descriptor was
processed last and always start where we left off avoiding the original
problem. On top of that, judging by the following excerpt from
MPC8548ERM (p. 14-48):
"... When the end of the TxBD ring is reached, eTSEC initializes TBPTRn
to the value in the corresponding TBASEn. The TBPTR register is
internally written by the eTSEC’s DMA controller during
transmission. The pointer increments by eight (bytes) each time a
descriptor is closed successfully by the eTSEC..."
revised algorithm might also a more correct way of emulating this aspect
of eTSEC peripheral.
Cc: Alexander Graf <agraf@suse.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to datasheet:
"[Bit 15 of Basic Mode Control Register] sets the status and control registers
of the PHY (register 0062-0074) in a default state. This bit is self-clearing.
1 = software reset; 0 = normal operation."
This fixes the netcard detection failure in Minoca OS.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
- fix crash (2.8 regression)
- 9p functional tests
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlhr39IACgkQAvw66wEB28JqsgCfdg0P7g6aYl/nji1BSFniy504
qUEAnAmRsmJDll+eNH31aMFVlSAGGotq
=iMVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
- transport specific callbacks (for Xen)
- fix crash (2.8 regression)
- 9p functional tests
# gpg: Signature made Tue 03 Jan 2017 17:30:58 GMT
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
tests: virtio-9p: ".." cannot be used to walk out of the shared directory
tests: virtio-9p: no slash in path elements during walk
tests: virtio-9p: add walk operation test
tests: virtio-9p: add attach operation test
tests: virtio-9p: add version operation test
9pfs: fix P9_NOTAG and P9_NOFID macros
tests: virtio-9p: code refactoring
tests: virtio-9p: rename PCI configuration test
9pfs: fix crash when fsdev is missing
9pfs: introduce init_out/in_iov_from_pdu
9pfs: call v9fs_init_qiov_from_pdu before v9fs_pack
9pfs: introduce transport specific callbacks
9pfs: move pdus to V9fsState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a performance optimization to eliminate vmexits during polling.
It also avoids spurious ioeventfd processing after polling ends.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-12-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Polling should disable virtqueue notifications but that requires nested
virtio_queue_set_notification() calls. Turn vq->notification into a
counter so it is possible to do nesting.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The guest does not need to kick the virtqueue while we are processing
it. This reduces the number of vmexits during periods of heavy I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The guest does not need to kick the virtqueue while we are processing
it. This reduces the number of vmexits during periods of heavy I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an AioContext poll handler to detect new virtqueue buffers without
waiting for a guest->host notification.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.
Keep this code change separate due to the number of files it touches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The u16 and u32 types don't exist in QEMU common headers. It never broke
build because these two macros aren't use by the current code, but this
is about to change with the future addition of functional tests for 9P.
Also, these should have enclosing parenthesis to be usable in any
syntactical situation.
As suggested by Eric Blake, let's use UINT16_MAX and UINT32_MAX to address
both issues.
Signed-off-by: Greg Kurz <groug@kaod.org>
If the user passes -device virtio-9p without the corresponding -fsdev, QEMU
dereferences a NULL pointer and crashes.
This is a 2.8 regression introduced by commit 702dbcc274.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Not all 9pfs transports share memory between request and response. For
those who don't, it is necessary to know how much memory is required in
the response.
Split the existing init_iov_from_pdu function in two:
init_out_iov_from_pdu (for writes) and init_in_iov_from_pdu (for reads).
init_in_iov_from_pdu takes an additional size parameter to specify the
memory required for the response message.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
v9fs_xattr_read should not access VirtQueueElement elems directly.
Move v9fs_init_qiov_from_pdu up in the file and call
v9fs_init_qiov_from_pdu before v9fs_pack. Use v9fs_pack on the new
iovec.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Don't call virtio functions from 9pfs generic code, use generic function
callbacks instead.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
pdus are initialized and used in 9pfs common code. Move the array from
V9fsVirtioState to V9fsState.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
In the resource attach backing function, everytime it will
allocate 'res->iov' thus can leading a memory leak. This
patch avoid this.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Message-id: 1483003721-65360-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the virgl_renderer_resource_attach_iov function fails the
'res_iovs' will be leaked. Add check of the return value to
free the 'res_iovs' when failing.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1482999086-59795-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the guest destroy the resource before detach banking, the 'iov'
and 'addrs' field in resource is not freed thus leading memory
leak issue. This patch avoid this.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1480386565-10077-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a NULL check for i2c slave init callbacks, so that we no longer
need to implement empty init functions.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Message-id: 20161202054617.6749-4-alastair@au1.ibm.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: squashed in later tweak from Alistair to if() phrasing]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new configuration field at the board level and propagate the
value using the "num-cs" property of the FMC controller model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1480434248-27138-14-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The HW does not enforce all the rules in the specs and allows a few
"curious" setups like zero size segments and overlaps. So change the
model to be in sync but keep the warnings which are always interesting
for debug.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 1480434248-27138-13-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-12-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The palmetto BMC machine uses a AST2400 revision A1 SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-11-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is not much differences with the A0 revision apart from the DDR
calibration.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-10-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The size of the SRAM depends on the SoC model, so use a per-soc
definition when creating the region.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-9-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Romulus machine is an OpenPOWER system with an AST2500 SoC for
the BMC and a POWER9 chip for the host. It does not make much
difference for qemu a part from the fact that the FMC controller has
two SPI flash module.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 1480434248-27138-8-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Future machine will use different flash models for the FMC and the SPI
controllers.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-7-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-6-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With commit ce5b1bbf62 ("exec: move cpu_exec_init() calls to realize
functions"), we can now remove cannot_destroy_with_object_finalize_yet.
Suggested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1480434248-27138-5-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1480434248-27138-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICv3 requires that we only signal Pending interrupts to
the CPU. This category does not include Pending+Active interrupts,
which means we need to check whether the interrupt is Active in
the gicr_int_pending() and gicd_int_pending() functions.
Interrupts are rarely in the Active+Pending state, but KVM
uses this as part of its handling of the virtual timer, so
this bug was causing KVM to go into an infinite loop of
taking the vtimer interrupt when the guest first triggered it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In the ARMCPRegInfo definitions for the GICv3 CPU interface
registers, we were trying to use .fieldoffset to specify
the locations of data fields within the GICv3CPUState struct.
This is completely broken, because .fieldoffset is for offsets
into the CPUARMState struct. We didn't notice because we
were only using this for reads to BPR0, AP0R<n>, IGRPEN0
and CTLR_EL3, and Linux doesn't use these registers.
Replace the .fieldoffset uses with explicit read functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20161209143703.29457-1-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When register Rcvr_timeout_reg0 (R_RTOR in cadence_uart.c) is set to
0, the receiver timeout counter should be disabled. See page 1801 of
"Zynq-7000 AP SoC Technical Reference Manual". This commit adds a
such a check before setting the receive timeout interrupt.
Signed-off-by: Andrew Gacek <andrew.gacek@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cadence UART device emulator calculates speed by dividing the
baud rate by a 'baud rate generator' & 'baud rate divider' value.
The device specification defines these register values to be
non-zero and within certain limits. Checks were recently added when
writing to these registers but not when restoring from migration.
This patch adds checks when restoring from migration to avoid divide by
zero errors.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 04ae30ed8ee1758cd2d2af880da4d28f74c67738.1481132150.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for KVM_CAP_ADJUST_CLOCK capability KVM_CLOCK_TSC_STABLE, which
indicates that KVM_GET_CLOCK returns a value as seen by the guest at
that moment.
For new machine types, use this value rather than reading
from guest memory.
This reduces kvmclock difference on migration from 5s to 0.1s
(when max_downtime == 5s).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20161121105052.598267440@redhat.com>
[Add comment explaining what is going on. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a scsi-disk object receives VERIFY command with BYTCHK bit being zero,
scsi_block_is_passthrough returns false and finally makes req being proceeded
by scsi_block_dma_command. Because scsi_block_dma_command has removed process
of VERIFY, QEMU will abort in this function.
Reported-by: Junlian Bell <zhongjun@sangfor.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch is to fix the confusing assert fail message caused by
un-initialized device structure (from bite sized tasks).
The bug can be reproduced by
./qemu-system-x86_64 -nographic -device cfi.pflash01
The CFI hardware is dynamically loaded by QOM realizing mechanism,
however the realizing function in pflash_cfi01_realize function
requires the device being initialized manually before calling, like
./qemu-system-x86_64 -nographic
-device cfi.pflash01,num-blocks=1024,sector-length=4096,name=testcard
Once the initializing parameters are left off in the command, it will
leave the device structure not initialized, which makes
pflash_cfi01_realize try to realize a zero-volume card, causing
/mnt/EXT_volume/projects/qemu/qemu-dev/exec.c:1378:
find_ram_offset: Assertion `size != 0\' failed.
Through my test, at least the flash device's block-number, sector-length
and its name is needed for pflash_cfi01_realize to behave correctly. So
I think the new asserts are needed to hint the QEMU user to specify
the device's parameters correctly.
Signed-off-by: Ziyue Yang <skiver.cloud.yzy@gmail.com>
Message-Id: <1481810693-13733-1-git-send-email-skiver.cloud.yzy@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ziyue Yang <yzylivezh@hotmail.com>
get_opt_value() truncates the value at the first comma
Use memcpy() instead so that -append works correctly in the
presence of commas. For -initrd to work right, instead,
unescape the module filename and parameters with get_opt_value()
before calling mb_add_cmdline().
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Message-Id: <1481805124-16242-1-git-send-email-vlad.lungu@windriver.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These will be used more as soon as the acquire/release is pushed down to
the ioeventfd handlers.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
