Set the 2-NaN propagation rule explicitly in env->fp_status
and env->vec_status.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-9-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in env->fpu_status.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-8-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in env->fp_status.
Really we only need to do this at CPU reset (after reset has zeroed
out most of the CPU state struct, which typically includes fp_status
fields). However target/hppa does not currently implement CPU reset
at all, so leave a TODO comment to note that this could be moved if
we ever do implement reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-7-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in the float_status word we
use.
(There are a couple of places in fpu_helper.c where we create a
dummy float_status word with "float_status *s = { };", but these
are only used for calling float*_is_quiet_nan() so it doesn't
matter that we don't set a 2-NaN propagation rule there.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-6-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in the float_status words
we use.
For active_fpu.fp_status, we do this in a new fp_reset() function
which mirrors the existing msa_reset() function in doing "first call
restore to set the fp status parts that depend on CPU state, then set
the fp status parts that are constant".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241025141254.2141506-5-peter.maydell@linaro.org
Set the 2-NaN propagation rule explicitly in the float_status words
we use. We wrap this plus the pre-existing setting of the
tininess-before-rounding flag in a new function
arm_set_default_fp_behaviours() to avoid repetition, since we have a
lot of float_status words at this point.
The situation with FPA11 emulation in linux-user is a little odd, and
arguably "correct" behaviour there would be to exactly match a real
Linux kernel's FPA11 emulation. However FPA11 emulation is
essentially dead at this point and so it seems better to continue
with QEMU's current behaviour and leave a comment describing the
situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-4-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
=EZnr
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241102
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZyXbXgAKCRBAov/yOSY+
# 37a9BADZ7vI2idWNXdH+mLNDZNSOxfdKp6ggNgKS3S48Hi2zR72MEhwvR9dGlHDL
# 98agrbV7/jI9Z+0dLAxvlyl1MvXfnn2sXYgUuZp6IAaQzFBa11HBAK7UFh3sTA4A
# gD4oPwl8AdJiFvDN6vNjS+dO0ls+j/YMaoLkAKLv15dlWtg4Rw==
# =EZnr
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 02 Nov 2024 07:57:18 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241102' of https://gitlab.com/gaosong/qemu:
target/loongarch: Add steal time support on migration
hw/loongarch/boot: Use warn_report when no kernel filename
linux-headers: Update to Linux v6.12-rc5
linux-headers: loongarch: Add kvm_para.h
linux-headers: Add unistd_64.h
target/loongarch/kvm: Implement LoongArch PMU extension
target/loongarch: Implement lbt registers save/restore function
target/loongarch: Add loongson binary translation feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With pv steal time supported, VM machine needs get physical address
of each vcpu and notify new host during migration. Here two
functions kvm_get_stealtime/kvm_set_stealtime, and guest steal time
physical address is only updated on KVM_PUT_FULL_STATE stage.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240930064040.753929-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Implement PMU extension for LoongArch kvm mode. Use OnOffAuto type
variable pmu to check the PMU feature. If the PMU Feature is not supported
with KVM host, it reports error if there is pmu=on command line.
If there is no any command line about pmu parameter, it checks whether
KVM host supports the PMU Feature and set the corresponding value in cpucfg.
This patch is based on lbt patch located at
https://lore.kernel.org/qemu-devel/20240904061859.86615-1-maobibo@loongson.cn
Co-developed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918082315.2345034-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Six registers scr0 - scr3, eflags and ftop are added in percpu vmstate.
And two functions kvm_loongarch_get_lbt/kvm_loongarch_put_lbt are added
to save/restore lbt registers.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240929070405.235200-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Loongson Binary Translation (LBT) is used to accelerate binary
translation, which contains 4 scratch registers (scr0 to scr3), x86/ARM
eflags (eflags) and x87 fpu stack pointer (ftop).
Now LBT feature is added in kvm mode, not supported in TCG mode since
it is not emulated. Feature variable lbt is added with OnOffAuto type,
If lbt feature is not supported with KVM host, it reports error if there
is lbt=on command line.
If there is no any command line about lbt parameter, it checks whether
KVM host supports lbt feature and set the corresponding value in cpucfg.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240929070405.235200-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
AVX10 state enumeration in CPUID leaf D and enabling in XCR0 register
are identical to AVX512 state regardless of the supported vector lengths.
Given that some E-cores will support AVX10 but not support AVX512, add
AVX512 state components to guest when AVX10 is enabled.
Based on a patch by Tao Su <tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20241031085233.425388-8-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the highest supported vector length for a processor implies that
all lesser vector lengths are also supported, add the dependencies of
the supported vector lengths. If all vector lengths aren't supported,
clear AVX10 enable bit as well.
Note that the order of AVX10 related dependencies should be kept as:
CPUID_24_0_EBX_AVX10_128 -> CPUID_24_0_EBX_AVX10_256,
CPUID_24_0_EBX_AVX10_256 -> CPUID_24_0_EBX_AVX10_512,
CPUID_24_0_EBX_AVX10_VL_MASK -> CPUID_7_1_EDX_AVX10,
CPUID_7_1_EDX_AVX10 -> CPUID_24_0_EBX,
so that prevent user from setting weird CPUID combinations, e.g. 256-bits
and 512-bits are supported but 128-bits is not, no vector lengths are
supported but AVX10 enable bit is still set.
Since AVX10_128 will be reserved as 1, adding these dependencies has the
bonus that when user sets -cpu host,-avx10-128, CPUID_7_1_EDX_AVX10 and
CPUID_24_0_EBX will be disabled automatically.
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20241028024512.156724-5-tao1.su@linux.intel.com
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20241031085233.425388-7-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When AVX10 enable bit is set, the 0x24 leaf will be present as "AVX10
Converged Vector ISA leaf" containing fields for the version number and
the supported vector bit lengths.
Introduce avx10-version property so that avx10 version can be controlled
by user and cpu model. Per spec, avx10 version can never be 0, the default
value of avx10-version is set to 0 to determine whether it is specified by
user. The default can come from the device model or, for the max model,
from KVM's reported value.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20241028024512.156724-3-tao1.su@linux.intel.com
Link: https://lore.kernel.org/r/20241028024512.156724-4-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20241031085233.425388-5-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for filtering non-boolean features such as AVX10 version.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20241031085233.425388-4-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, QEMU is using the "feature" and "bits" fields of ExtSaveArea
to query the accelerator for the support status of extended save areas.
This is a problem for AVX10, which attaches two feature bits (AVX512F
and AVX10) to the same extended save states.
To keep the AVX10 hacks to the minimum, limit usage of esa->features
and esa->bits. Instead, just query the accelerator for the 0xD leaf.
Do it in common code and clear esa->size if an extended save state is
unsupported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20241031085233.425388-3-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This gives greater opportunity for reassociation on x86 targets,
since addition can use the LEA instruction.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the operands of the arithmetic instruction fit within a half-register,
it's easiest to use a comparison instruction to compute the carry.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the 256 byte parity table from the executable.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes it easier for the compiler to understand which bits are set,
and it also removes "cltq" instructions to canonicalize the output value
as 32-bit signed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mostly used for TEST+JG and TEST+JLE, but it is easy to cover
also JBE/JA and JL/JGE; shaves about 0.5% TCG ops.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most uses of CC_OP_DYNAMIC are for CMP/JB/JE or similar sequences.
We can optimize many of them to avoid computation of the flags.
This eliminates both TCG ops to set up the new cc_op, and helper
instructions because evaluating just ZF is much cheaper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assert that op is known and that cc_op_live_ is populated.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace arithmetic on cc_op with a helper function.
Assert that the op has a size and that it is valid
for the configuration.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240701025115.1265117-6-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Give the first few enumerators explicit integer constants,
align the BWLQ enumerators.
This will be used to simplify ((op - CC_OP_*B) & 3).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240701025115.1265117-4-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just use CC_OP_EFLAGS; it is not that likely that the flags computed by
CC_OP_CLR survive the end of the basic block, in which case there is no
need to spill cc_op_src.
cc_op_src now does need spilling if the XOR is followed by a memory
operation, but this only costs 0.2% extra TCG ops. They will be recouped
by simplifications in how QEMU evaluates ZF at runtime, which are even
greater with this change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make const. Use the read-only strings directly; do not copy
them into an on-stack buffer with snprintf. Allow for holes
in the cc_op_str array, now present with CC_OP_POPCNT.
Fixes: 460231ad36 ("target/i386: give CC_OP_POPCNT low bits corresponding to MO_TL")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240701025115.1265117-2-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prefer it to gen_ext_tl in the common case where the destination is known.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The call to xgetbv() is passing the ecx value for cpuid function 0xD,
index 0. The xgetbv call thus returns false (OSXSAVE is bit 27, which is
well out of the range of CPUID[0xD,0].ECX) and eax is not modified. While
fixing it, cache the whole computation of supported XCR0 bits since it
will be used for more than just CPUID leaf 0xD.
Furthermore, unsupported subleafs of CPUID 0xD (including all those
corresponding to zero bits in host's XCR0) must be hidden; if OSXSAVE
is not set at all, the whole of CPUID leaf 0xD plus the XSAVE bit must
be hidden.
Finally, unconditionally drop XSTATE_BNDREGS_MASK and XSTATE_BNDCSR_MASK;
real hardware will only show them if the MPX bit is set in CPUID;
this is never the case for hvf_get_supported_cpuid() because QEMU's
Hypervisor.framework support does not handle the VMX fields related to
MPX (even in the unlikely possibility that the host has MPX enabled).
So hide those bits in the new cache_host_xcr0().
Cc: Phil Dennis-Jordan <lists@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer AMD CPUs support ERAPS (Enhanced Return Address Prediction Security)
feature that enables the auto-clear of RSB entries on a TLB flush, context
switches and VMEXITs. The number of default RSP entries is reflected in
RapSize.
Add the feature bit and feature word to support these features.
CPUID_Fn80000021_EAX
Bits Feature Description
24 ERAPS:
Indicates support for enhanced return address predictor security.
CPUID_Fn80000021_EBX
Bits Feature Description
31-24 Reserved
23:16 RapSize:
Return Address Predictor size. RapSize x 8 is the minimum number
of CALL instructions software needs to execute to flush the RAP.
15-00 MicrocodePatchSize. Read-only.
Reports the size of the Microcode patch in 16-byte multiples.
If 0, the size of the patch is at most 5568 (15C0h) bytes.
Link: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/57238.zip
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/7c62371fe60af1e9bbd853f5f8e949bf2d908bd0.1729807947.git.babu.moger@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 0x80000022, i.e. ExtPerfMonAndDbg, advertises new performance
monitoring features for AMD processors. Bit 0 of EAX indicates support
for Performance Monitoring Version 2 (PerfMonV2) features. If found to
be set during PMU initialization, the EBX bits can be used to determine
the number of available counters for different PMUs. It also denotes the
availability of global control and status registers.
Add the required CPUID feature word and feature bit to allow guests to
make use of the PerfMonV2 features.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/a96f00ee2637674c63c61e9fc4dee343ea818053.1729807947.git.babu.moger@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check of cpu->phys_bits to be in range between
[32, TARGET_PHYS_ADDR_SPACE_BITS] in host_cpu_realizefn()
is duplicated with check in x86_cpu_realizefn().
Since the ckeck in x86_cpu_realizefn() is called later and can cover all
the x86 cases. Remove the one in host_cpu_realizefn().
Opportunistically adjust cpu->phys_bits directly in
host_cpu_adjust_phys_bits(), which matches more with the function name.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20240929085747.2023198-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
-----BEGIN PGP SIGNATURE-----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=rPaa
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vcompress packs vl or less fields into vd, so the tail starts after the
last packed field. This could be more clearly expressed in the ISA,
but for now this thread helps to explain it:
https://github.com/riscv/riscv-v-spec/issues/796
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241030043538.939712-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We do not have control in the default 'riscv-aia' default value. We can
try to set it to a specific value, in this case 'auto', but there's no
guarantee that the host will accept it.
Couple with this we're always doing a 'qemu_log' to inform whether we're
ended up using the host default or if we managed to set the AIA mode to
the QEMU default we wanted to set.
Change the 'riscv-aia' description to better reflect how the option
works, and remove the two informative 'qemu_log' that are now unneeded:
if no message shows, riscv-aia was set to the default or uset-set value.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When failing to set the selected AIA mode, 'aia_mode' is left untouched.
This means that 'aia_mode' will not reflect the actual AIA mode,
retrieved in 'default_aia_mode',
This is benign for now, but it will impact QMP query commands that will
expose the 'aia_mode' value, retrieving the wrong value.
Set 'aia_mode' to 'default_aia_mode' if we fail to change the AIA mode
in KVM.
While we're at it, rework the log/warning messages to be a bit less
verbose. Instead of:
KVM AIA: default mode is emul
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode
We can use a single warning message:
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode 'auto', using default host mode 'emul'
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LFENCE and SFENCE were introduced with the original SSE instruction set;
marking them incorrectly as cpuid(SSE2) causes failures for CPU models
that lack SSE2, for example pentium3.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sspush/sspopchk have compressed encodings carved out of zcmops.
compressed sspush is designated as c.mop.1 while compressed sspopchk
is designated as c.mop.5.
Note that c.sspush x1 exists while c.sspush x5 doesn't. Similarly
c.sspopchk x5 exists while c.sspopchk x1 doesn't.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-18-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicfiss has following instructions
- sspopchk: pops a value from shadow stack and compares with x1/x5.
If they dont match, reports a sw check exception with tval = 3.
- sspush: pushes value in x1/x5 on shadow stack
- ssrdp: reads current shadow stack
- ssamoswap: swaps contents of shadow stack atomically
sspopchk/sspush/ssrdp default to zimop if zimop implemented and SSE=0
If SSE=0, ssamoswap is illegal instruction exception.
This patch implements shadow stack operations for qemu-user and shadow
stack is not protected.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-17-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Extra word 2 is stored during tcg compile and `decode_save_opc` needs
additional argument in order to pass the value. This will be used during
unwind to get extra information about instruction like how to massage
exceptions. Updated all callsites as well.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/594
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-16-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds one more word for tcg compile which can be obtained during
unwind time to determine fault type for original operation (example AMO).
Depending on that, fault can be promoted to store/AMO fault.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-15-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
