KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() use an 'int ret' variable
that is used to do an early 'return' if ret > 0. Both are being called
in functions that are also declaring a 'ret' integer, initialized with
'0', and this integer is used as return of the function.
The result is that the compiler is less than pleased and is pointing
shadowing errors:
../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_get_regs_csr':
../target/riscv/kvm/kvm-cpu.c:90:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local]
90 | int ret = kvm_get_one_reg(cs, RISCV_CSR_REG(env, csr), ®); \
| ^~~
../target/riscv/kvm/kvm-cpu.c:539:5: note: in expansion of macro 'KVM_RISCV_GET_CSR'
539 | KVM_RISCV_GET_CSR(cs, env, sstatus, env->mstatus);
| ^~~~~~~~~~~~~~~~~
../target/riscv/kvm/kvm-cpu.c:536:9: note: shadowed declaration is here
536 | int ret = 0;
| ^~~
../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_put_regs_csr':
../target/riscv/kvm/kvm-cpu.c:98:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local]
98 | int ret = kvm_set_one_reg(cs, RISCV_CSR_REG(env, csr), ®); \
| ^~~
../target/riscv/kvm/kvm-cpu.c:556:5: note: in expansion of macro 'KVM_RISCV_SET_CSR'
556 | KVM_RISCV_SET_CSR(cs, env, sstatus, env->mstatus);
| ^~~~~~~~~~~~~~~~~
../target/riscv/kvm/kvm-cpu.c:553:9: note: shadowed declaration is here
553 | int ret = 0;
| ^~~
The macros are doing early returns for non-zero returns and the local
'ret' variable for both functions is used just to do 'return 0', so
remove them from kvm_riscv_get_regs_csr() and kvm_riscv_put_regs_csr()
and do a straight 'return 0' in the end.
For good measure let's also rename the 'ret' variables in
KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() to '_ret' to make them more
resilient to these kind of errors.
Fixes: 937f0b4512 ("target/riscv: Implement kvm_arch_get_registers")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231123101338.1040134-1-dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
According to RISCV Specification sect 9.5 on two stage translation when
V=1 the vsstatus(mstatus in QEMU's terms) field MXR, which makes
execute-only pages readable, only overrides VS-stage page protection.
Setting MXR at HS-level(mstatus_hs), however, overrides both VS-stage
and G-stage execute-only permissions.
The hypervisor extension changes the behavior of MXR\MPV\MPRV bits.
Due to RISCV Specification sect. 9.4.1 when MPRV=1, explicit memory
accesses are translated and protected, and endianness is applied, as
though the current virtualization mode were set to MPV and the current
nominal privilege mode were set to MPP. vsstatus.MXR makes readable
those pages marked executable at the VS translation stage.
Fixes: 36a18664ba ("target/riscv: Implement second stage MMU")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231121071757.7178-3-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISCV privileged spec sect. 5.3.2 Virtual Address Translation Process
access-fault exceptions may raise only after PMA/PMP check. Current implementation
generates an access-fault for mbare mode even if there were no PMA/PMP errors.
This patch removes the erroneous MMU mode check and generates an access-fault
exception based on the pmp_violation flag only.
Fixes: 1448689c7b ("target/riscv: Allow specifying MMU stage")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231121071757.7178-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The extensions zicntr and zihpm were officially added in the privilege
instruction set specification 1.12. However, QEMU has been implemented
them long before it and thus they are forced to be on during the cpu
initialization to ensure compatibility (see riscv_cpu_init).
riscv_cpu_disable_priv_spec_isa_exts was not updated when the above
behavior was introduced, resulting in these extensions to be disabled
after all.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Fixes: c004099330 ("target/riscv: add zicntr extension flag for TCG")
Fixes: 0824121660 ("target/riscv: add zihpm extension flag for TCG")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231114123913.536194-1-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let CPUClass::class_by_name() handlers to return abstract classes,
and filter them once in the public cpu_class_by_name() method.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230908112235.75914-3-philmd@linaro.org>
The OBJECT_DECLARE_CPU_TYPE() macro forward-declares each
ArchCPUClass type. These forward declarations are sufficient
for code in hw/ to use the QOM definitions. No need to expose
these structure definitions. Keep each local to their target/
by moving them to the corresponding "cpu.h" header.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-13-philmd@linaro.org>
When CPUArchState* is available (here CPURISCVState*), we
can use the fast env_archcpu() macro to get ArchCPU* (here
RISCVCPU*). The QOM cast RISCV_CPU() macro will be slower
when building with --enable-qom-cast-debug.
Inspired-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20231009110239.66778-3-philmd@linaro.org>
TYPE_RISCV_CPU_BASE depends on the TARGET_RISCV32/TARGET_RISCV64
definitions which are target specific. Such target specific
definition taints "cpu-qom.h".
Since "cpu-qom.h" must be target agnostic, remove its target
specific definition uses by moving TYPE_RISCV_CPU_BASE to
"target/riscv/cpu.h".
"target/riscv/cpu-qom.h" is now fully target agnostic.
Add a comment clarifying that in the header.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-12-philmd@linaro.org>
CPU_RESOLVING_TYPE is a per-target definition, and is
irrelevant for other targets. Move it to "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-6-philmd@linaro.org>
Enforce the style described by commit 067109a11c ("docs/devel:
mention the spacing requirement for QOM"):
The first declaration of a storage or class structure should
always be the parent and leave a visual space between that
declaration and the new code. It is also useful to separate
backing for properties (options driven by the user) and internal
state to make navigation easier.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231013140116.255-2-philmd@linaro.org>
Using a mask instead of the number of PMU devices supports the accurate
emulation of platforms that have a discontinuous set of PMU counters.
The "pmu-num" property now generates a warning when used by the user on
the command line.
Rather than storing the value for "pmu-num" convert it directly to the
mask if it is specified (overwriting the default "pmu-mask" value)
likewise the value is calculated from the mask if the property value is
obtained.
In the unusual situation that both "pmu-mask" and "pmu-num" are provided
then then the order on the command line determines which takes
precedence (later overwriting earlier.)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231031154000.18134-5-rbradford@rivosinc.com>
[Changes by AF
- Fixup ext_zihpm logic after rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
During the FDT generation use the existing mask containing the enabled
counters rather then generating a new one. Using the existing mask will
support the use of discontinuous counters.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20231031154000.18134-4-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Check the PMU available bitmask when checking if a counter is valid
rather than comparing the index against the number of PMUs.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20231031154000.18134-3-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
More closely follow the QEMU style by returning an Error and propagating
it there is an error relating to the PMU setup.
Further simplify the function by removing the num_counters parameter as
this is available from the passed in cpu pointer.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20231031154000.18134-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Set the Ibex CPU priv to 1.12.0 to ensure that smepmp/epmp is correctly
enabled.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231102003424.2003428-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because the vector crypto specification is ratified, so move theses
extensions from riscv_cpu_experimental_exts to riscv_cpu_extensions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expose the properties of ShangMi Algorithm Suite related extensions
(Zvks, Zvksc, Zvksg).
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector crypto spec defines the ShangMi algorithm suite related
extensions (Zvks, Zvksc, Zvksg) combined by several vector crypto
extensions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expose the properties of NIST Algorithm Suite related extensions (Zvkn,
Zvknc, Zvkng).
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector crypto spec defines the NIST algorithm suite related extensions
(Zvkn, Zvknc, Zvkng) combined by several vector crypto extensions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zvkb extension is a proper subset of the Zvbb extension and includes
following instructions:
* vandn.[vv,vx]
* vbrev8.v
* vrev8.v
* vrol.[vv,vx]
* vror.[vv,vx,vi]
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After vector crypto spec v1.0.0-rc3 release, the Zvkb extension is
defined as a proper subset of the Zvbb extension. And both the Zvkn and
Zvks shorthand extensions replace the included Zvbb extension by Zvkb
extnesion.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector crypto spec defines the Zvkt extension that included all of the
instructions of Zvbb & Zvbc extensions and some vector instructions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The CSR register mseccfg is used by multiple extensions: Smepm and Zkr.
Consider this when checking the existence of the register.
Fixes: 77442380ec ("target/riscv: rvk: add CSR support for Zkr")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231030102105.19501-1-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These regs were added in Linux 6.6.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231031205150.208405-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add zihpm support in the KVM driver now that QEMU supports it.
This reg was added in Linux 6.6.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zihpm is the Hardware Performance Counters extension described in
chapter 12 of the unprivileged spec. It describes support for 29
unprivileged performance counters, hpmcounter3-hpmcounter31.
As with zicntr, QEMU already implements zihpm before it was even an
extension. zihpm is also part of the RVA22 profile, so add it to QEMU
to complement the future profile implementation. Default it to 'true'
for all existing CPUs since it was always present in the code.
As for disabling it, there is already code in place in
target/riscv/csr.c in all predicates for these counters (ctr() and
mctr()) that disables them if cpu->cfg.pmu_num is zero. Thus, setting
cpu->cfg.pmu_num to zero if 'zihpm=false' is enough to disable the
extension.
Set cpu->pmu_avail_ctrs mask to zero as well since this is also checked
to verify if the counters exist.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add zicntr support in the KVM driver now that QEMU supports it.
This reg was added in Linux 6.6.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicntr is the Base Counters and Timers extension described in chapter 12
of the unprivileged spec. It describes support for RDCYCLE, RDTIME and
RDINSTRET.
QEMU already implements it in TCG way before it was a discrete
extension. zicntr is part of the RVA22 profile, so let's add it to QEMU
to make the future profile implementation flag complete. Given than it
represents an already existing feature, default it to 'true' for all
CPUs.
For TCG, we need a way to disable zicntr if the user wants to. This is
done by restricting access to the CYCLE, TIME, and INSTRET counters via
the 'ctr()' predicate when we're about to access them.
Disabling zicntr happens via the command line or if its dependency,
zicsr, happens to be disabled. We'll check for zicsr during realize()
and, in case it's absent, disable zicntr. However, if the user was
explicit about having zicntr support, error out instead of disabling it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the Priv spec: "The R, W, and X fields form a collective WARL
field for which the combinations with R=0 and W=1 are reserved."
However currently such writes are not ignored as ought to be. The
combinations with RW=01 are allowed only when the Smepmp extension
is enabled and mseccfg.MML is set.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231019065705.1431868-1-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the Priv and Smepmp specifications, certain bits such as the 'L'
bit of pmp entries and mseccfg.MML can only be cleared upon reset and it
is necessary to do so to allow 'M' mode firmware to correctly reinitialize
the pmp/smpemp state across reboots. As required by the spec, also clear
the 'A' field of pmp entries.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231019065644.1431798-1-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Smepmp is a ratified extension which qemu refers to as epmp.
Rename epmp to smepmp and add it to extension list so that
it is added to the isa string.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231019065546.1431579-1-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the recently added riscv_cpu_accelerator_compatible() to filter
unavailable CPUs for a given accelerator. At this moment this is the
case for a QEMU built with KVM and TCG support querying a binary running
with TCG:
qemu-system-riscv64 -S -M virt,accel=tcg -display none
-qmp tcp:localhost:1234,server,wait=off
./qemu/scripts/qmp/qmp-shell localhost:1234
(QEMU) query-cpu-model-expansion type=full model={"name":"host"}
{"error": {"class": "GenericError", "desc": "'host' CPU not available with tcg"}}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add an API to check if a given CPU is compatible with the current
accelerator.
This will allow query-cpu-model-expansion to work properly in conditions
where QEMU supports both accelerators (TCG and KVM), QEMU is then
launched using TCG, and the API requests information about a KVM only
CPU (e.g. 'host' CPU).
KVM doesn't have such restrictions and, at least in theory, all CPUs
models should work with KVM. We will revisit this API in case we decide
to restrict the amount of KVM CPUs we support.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Callers can add 'props' when querying for a cpu model expansion to see
if a given CPU model supports a certain criteria, and what's the
resulting CPU object.
If we have 'props' to handle, gather it in a QDict and use the new
riscv_cpuobj_validate_qdict_in() helper to validate it. This helper will
add the custom properties in the CPU object and validate it using
riscv_cpu_finalize_features(). Users will be aware of validation errors
if any occur, if not a CPU object with 'props' will be returned.
Here's an example with the veyron-v1 vendor CPU. Disabling vendor CPU
extensions is allowed, assuming the final config is valid. Disabling
'smstateen' is a valid expansion:
(QEMU) query-cpu-model-expansion type=full model={"name":"veyron-v1","props":{"smstateen":false}}
{"return": {"model": {"name": "veyron-v1", "props": {"zicond": false, ..., "smstateen": false, ...}
But enabling extensions isn't allowed for vendor CPUs. E.g. enabling 'V'
for the veyron-v1 CPU isn't allowed:
(QEMU) query-cpu-model-expansion type=full model={"name":"veyron-v1","props":{"v":true}}
{"error": {"class": "GenericError", "desc": "'veyron-v1' CPU does not allow enabling extensions"}}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The query-cpu-model-expansion API is capable of passing extra properties
to a given CPU model and tell callers if this custom configuration is
valid.
The RISC-V version of the API is not quite there yet. The reason is the
realize() flow in the TCG driver, where most of the validation is done
in tcg_cpu_realizefn(). riscv_cpu_finalize_features() is then used to
validate satp_mode for both TCG and KVM CPUs.
Our ARM friends uses a concept of 'finalize_features()', a step done in
the end of realize() where the CPU features are validated. We have a
riscv_cpu_finalize_features() helper that, at this moment, is only
validating satp_mode.
Re-use this existing helper to do all CPU extension validation we
required after at the end of realize(). Make it public to allow APIs to
use it. At this moment only the TCG driver requires a realize() time
validation, thus, to avoid adding accelerator specific helpers in the
API, riscv_cpu_finalize_features() uses
riscv_tcg_cpu_finalize_features() if we are running TCG. The API will
then use riscv_cpu_finalize_features() regardless of the current
accelerator.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We got along without property getters in the KVM driver because we never
needed them. But the incoming query-cpu-model-expansion API will use
property getters and setters to retrieve the CPU characteristics.
Add the missing getters for the KVM driver for both MISA and
multi-letter extension properties. We're also adding an special getter
for absent multi-letter properties that KVM doesn't implement that
always return false.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This change adds support for inserting virtual interrupts from HS-mode
into VS-mode using hvien and hvip csrs. This also allows for IRQ filtering
from HS-mode.
Also, the spec doesn't mandate the interrupt to be actually supported
in hardware. Which allows HS-mode to assert virtual interrupts to VS-mode
that have no connection to any real interrupt events.
This is defined as part of the AIA specification [0], "6.3.2 Virtual
interrupts for VS level".
[0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231016111736.28721-7-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This change adds support for inserting virtual interrupts from M-mode
into S-mode using mvien and mvip csrs. IRQ filtering is a use case of
this change, i-e M-mode can stop delegating an interrupt to S-mode and
instead enable it in MIE and receive those interrupts in M-mode and then
selectively inject the interrupt using mvien and mvip.
Also, the spec doesn't mandate the interrupt to be actually supported
in hardware. Which allows M-mode to assert virtual interrupts to S-mode
that have no connection to any real interrupt events.
This is defined as part of the AIA specification [0], "5.3 Interrupt
filtering and virtual interrupts for supervisor level".
[0]: https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231016111736.28721-6-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is to allow virtual interrupts to be inserted into S and VS
modes. Given virtual interrupts will be maintained in separate
mvip and hvip CSRs, riscv_cpu_update_mip will no longer be in the
path and interrupts need to be triggered for these cases from
rmw_hvip64 and rmw_mvip64 functions.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231016111736.28721-5-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With H-Ext supported, VS bits are all hardwired to one in MIDELEG
denoting always delegated interrupts. This is being done in rmw_mideleg
but given mideleg is used in other places when routing interrupts
this change initializes it in riscv_cpu_realize to be on the safe side.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231016111736.28721-4-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCV_EXCP_SEMIHOST is set to 0x10, which can be a local interrupt id
as well. This change moves RISCV_EXCP_SEMIHOST to switch case so that
async flag check is performed before invoking semihosting logic.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231016111736.28721-3-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicboz they're more likely to do 'grep -i zicboz' than 'grep -i
icboz'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicbom they're more likely to do 'grep -i zicbom' than 'grep -i
icbom'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicsr they're more likely to do 'grep -i zicsr' than 'grep -i icsr'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
